KANEKO Kenji 金子堅司

… Alternative Names

金子賢二カネコケンジ

金子堅司カネコケンジ

Less

Researcher Number	40016803
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2016 – 2018: 東京理科大学, 工学部機械工学科, 教授 2014 – 2015: 東京理科大学, 工学部, 教授 2013: 東京理科大学, 工学部, 嘱託教授 2008 – 2012: Tokyo University of Science, 工学部, 教授 2010: Tokyo University of Science, 工学部・機械工学科, 教授 … More 2005 – 2006: 東京理科大学, 工学部, 教授 1997 – 2001: 東京理科大学, 工学部, 教授 1999: 東京理科大学, 理工学部, 教授 1995: 東京理科大学, 工学部, 教授 1993: 東京理科大学, 工学部, 教授 1988: 東京理科大学, 工学部, 助教授 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials Except Principal Investigator Materials/Mechanics of materials
Keywords	Principal Investigator 遮熱被膜 / 応力特異性 / 応力緩和 / せん断剥離 / 疲労 / 有限要素法 / せん断強度 / 層間はく離 / 溶射被膜 / 残留応力 … More / 剥離強度 / 高温疲労 / 過応力 / 温度依存性 / 時効 / 粘性 / 剥離基準 / 熱伝導特性 / 被膜強度 / 空孔率依存性、 / せん断剥離、 / 剥離強度基準、 / 遮熱被膜, / S-Nせん断疲労曲線 / 応力場の強さ / 熱負荷依存性 / 熱伝導率 / 空孔率依存性 / 剥離強度基準 / 疲労せん断剥離 / Stress singularity / Bonding engineering / Ceramic coating / Thermal spray / Surface treatment / Strength of materials / 剥離進展速度 / 応力特異場 / S-N曲線 / セラミック被膜 / 接合工学 / セラミックス被膜 / 溶射 / 表面改質 / 機械材料・材料力学 / Over stress / Relaxation / Rate dependence / Inelastic constitutive equations / Temperature dependence / Metals / Aging / Viscoplasticity / SUS316鋼 / ひずみ時効 / 速度依存性 / 金属材料 / 粘塑性 / 非弾性構成式 / 切り欠き効果 / 剥離現象 / 高温非弾性変形 / 熱疲労 / 温度傾斜場 / SUS304ステンレス鋼 / TiCコーティング / 熱応力 / 複合応力 / 加熱効果 / 層間剥離 / ＷＣ－Ｃｏ被膜 / 剥離試験 / 界面強度 / 熱負荷 / 疲労剥離 / 組合せ応力 / WC-Co被膜 / 組合わせ応力 / はく離基準 / 疲労はく離 / せん断はく離 / はく離強度 / 熱負荷・熱応力 / クリープ / 応力集中 / 酸化層 / 寸法効果 / 形状依存性 / 衝撃強度 / 非弾性変形 / 生分解性ポリマー / ひずみ速度依存性 / 繰り返し予負荷 / 構成方程式 / 非弾性 / 引張り特性 / 表面被覆 / 接合強度 / セラミック皮膜 / 高温非弾性挙動 / Al‐Si系焼結材料 … More Except Principal Investigator Stress Singularity / Phase Boundary / Aging / Constitutive Equation / Mixed Mode Crack / Crack on Phase Boundary / Dimple Fracture / Fracture Surface Analysis / 疲労破壊 / 塑性応力特異性 / 粘弾性 / ひずみ時効 / パターンマッチング / 損傷解析 / 微小き裂 / 応力特異性 / 界面 / 速度効果 / 遺伝的アルゴリズム / 画像処理 / 塑性拘束 / 粘性 / 時効 / ディンブル破壊 / 特異応力場 / 異材界面 / 粘性・時効 / 非弾性構成式 / 混合モードき裂 / 界面き裂 / ディンプル破壊 / 破面解析 Less

Evaluation of delamination strength and thermal conductivity of porous thermal barrier coating for super high temperature gas turbine in the next generationPrincipal Investigator
- Principal Investigator
  
  Kaneko Kenji
- Project Period (FY)
  2015 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
Influence of thermal loading on adhesive strength of thermal barrier coating applied to super high temperature gas turbinPrincipal Investigator
- Principal Investigator
  
  KANEKO Kenji
- Project Period (FY)
  2011 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
Study on Delamination Fatigue Strength of Thermal Barrier Coating at Elevated TemperaturePrincipal Investigator
- Principal Investigator
  
  KANEKO Kenji
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
Influence of Oxidation and Thermal Cycling on Bonding Strength of Thermal Barrier Coating at Elevated TemperaturePrincipal Investigator
- Principal Investigator
  
  KANEKO Kenji
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
生分解性プラスチックの非弾性変形・強度に関する研究Principal Investigator
- Principal Investigator
  
  金子堅司
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
Study on the meso-scopic fracture mechanics based on the non-uniform micro-mechanism of metals.
- Principal Investigator
  
  OKUMURA Hiroyuki
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Science University of Tokyo
STUDY ON INELASTIC CONSTITUTIVE EQUATIONS OF METALS CONSIDERING OF TEMPERATURE DEPENDENCY OF VISCOSITY AND AGINGPrincipal Investigator
- Principal Investigator
  
  KANEKO Kenji
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  SCIENCE UNIVERSITY OF TOKYO
ひずみ時効を考慮した非弾性構成モデルに関する研究Principal Investigator
- Principal Investigator
  
  金子堅司
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
金属基複合材料の高温非弾性変形特性とセラミック被覆皮膜の高温接合強度評価Principal Investigator
- Principal Investigator
  
  金子堅司
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tokyo University of Science
核融合炉第一壁材料の高温破壊強度--セラミックス・コーティング壁材の高温強度--Principal Investigator
- Principal Investigator
  
  金子堅司
- Project Period (FY)
  1988
- Research Category
  
  Grant-in-Aid for Fusion Research
- Research Institution
  Tokyo University of Science

All 2019 2018 2017 2015 2014 2012 2011 2010 2009 2008 2007 2004 Other

All Journal Article Presentation

[Journal Article] Evaluation of deformation properties of porous thermal barrier coatings by indentation method2018
- Author(s)
  Kenji Kaneko
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 84 Issue: 863 Pages: 18-00147-18-00147
- DOI
  10.1299/transjsme.18-00147
- NAID
  130007419183
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15K05692
[Journal Article] Evaluation of the Shearing Strength of a WC-12Co Thermal Spray Coating by the Scraping Test Method,2015
- Author(s)
  Kenji Kaneko
- Journal Title
  
  Coatings
  
  Volume: 5 Issue: 3 Pages: 278-292
- DOI
  10.3390/coatings5030278
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-15K05692
[Journal Article] Evaluation of Shear Delamination Strength of Thermal Barrier Coating After Heating by Torsion Pin-Test Method2015
- Author(s)
  Kenji Kaneko
- Journal Title
  
  Engineering Fracture Mechanics
  
  Volume: 148 Pages: 192-202
- DOI
  10.1016/j.engfracmech.2015.09.004
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05692
[Journal Article] ねじりピンテスト法によるWC-Co溶射被膜の疲労はく離強度評価2014
- Author(s)
  金子堅司，檜垣圭太朗
- Journal Title
  
  日本機械学会論文集
  
  Volume: 80 Pages: 1-13
- NAID
  130005004954
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-23560098
[Journal Article] Delamination Strength of WC-Co Thermal-Sprayed Coating Under Combined Stresses by Torsion-Tension Pin-Test Method,2014
- Author(s)
  Kenji KANEKO and Keitaro HIGAKI,
- Journal Title
  
  Journal of Thermal Spray Technology
  
  Volume: 23 Pages: 903-909
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-23560098
[Journal Article] エポキシ接着継ぎ手の複合負荷下の強度基準とその接着層厚さ依存性2014
- Author(s)
  金子堅司
- Journal Title
  
  日本機械学会論文集
  
  Volume: 80 Pages: 1-11
- NAID
  130004684661
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-23560098
[Journal Article] Delamination Strength of WC-Co Thermal Sprayed Coating under Combined Stresses by Torsion-Tension Pin-test Method2014
- Author(s)
  Kenji KANEKO and Keitaro HIGAKI
- Journal Title
  
  International Journal of Thermal Spray Technology
  
  Volume: 23
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560098
[Journal Article] Delamination Strength Evaluation of Thermal Sprayed Coating by Torsion Pin-Test Method2011
- Author(s)
  Kenji KANEKO and Keitaro HIGAKI
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 5 Pages: 1042-1050
- NAID
  130002072371
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560098
[Journal Article] Evaluations of Strength of Thermal Sprayed Coating for Complex Loading2010
- Author(s)
  金子堅司・大森明
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 4
  
  Pages: 264-273
- NAID
  130000255501
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] Study on Shear Fatigue Fracture and Delamination Mechanism of Thermal Barrier Coatings After Thermal Loading2010
- Author(s)
  金子堅司・高藤聡・榎本和城
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 4
  
  Pages: 315-324
- NAID
  130000255506
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] 熱負荷を受けた遮熱被膜のせん断疲労破壊とはく離機構に関する研究2010
- Author(s)
  金子堅司・高藤聡・榎本和城
- Journal Title
  
  日本機械学会論文集A編 76
  
  Pages: 853-859
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] 熱負荷を受けた遮熱被膜のせん断疲労破壊とはく離機構に関する研究2010
- Author(s)
  金子堅司・高藤聡・榎本和城
- Journal Title
  
  日本機械学会論文集A編
  
  Volume: 76 Pages: 853-859
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] Study on Adhesive Strength Criterion under Complex Stresse2010
- Author(s)
  金子堅司
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering(ONLINE ISSN : 1880-9871)
  
  Volume: 3 Pages: 49-63
- NAID
  130000667609
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] Study on Shear Fatigue Fracture and Delamination Mechanism of Thermal Barrier Coatings After Thermal Loadine2010
- Author(s)
  金子堅司・高藤聡・榎本和城
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering 4
  
  Pages: 315-324
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] Study on Adhesive Strength Criterion under Complex Stresses2009
- Author(s)
  金子堅司
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering (ONLINE ISSN : 1880-9871 ) 3
  
  Pages: 49-63
- NAID
  130000667609
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560087
[Journal Article] 複合応力下の接着強度基準に関する研究2007
- Author(s)
  金子堅司, 奈良橋一也
- Journal Title
  
  日本機械学会論文集A 73,726
  
  Pages: 201-208
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560082
[Journal Article] 溶射被膜の混合モード下における破壊強度に関する研究2004
- Author(s)
  金子堅司, 平石豊太郎, 大森明
- Journal Title
  
  日本機械学会論文集A 70,695
  
  Pages: 920-927
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560082
[Journal Article] Evaluations of Strength of Thermal Sprayed Coating With Crack2004
- Author(s)
  Kenji KANEKO, T. Hiraishi
- Journal Title
  
  Proceeding of Int. Thermal Spray Conference (CD)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560082
[Presentation] 多孔質遮熱被膜の疲労せん断剥離強度評価2019
- Author(s)
  金子堅司、荒井正行
- Organizer
  日本機械学会2019年次大会講演会
- Data Source
  KAKENHI-PROJECT-15K05692
[Presentation] 押し込み試験による多孔質遮熱被膜の変形特性評価2018
- Author(s)
  金子堅司、荒井正行
- Organizer
  日本機械学会2018年次大会講演会
- Data Source
  KAKENHI-PROJECT-15K05692
[Presentation] 多孔質遮熱被膜の弾塑性変形特性2017
- Author(s)
  金子堅司
- Organizer
  日本機械学会材料力学講演会
- Data Source
  KAKENHI-PROJECT-15K05692
[Presentation] Delamination Strength Evaluation of Thermal Sprayed Coating by Torsion Pin-test Method2012
- Author(s)
  Kenji Kaneko & Keitaro HIGAKI
- Organizer
  the 3rd Asian Symposium on Materials and Processing (ASMP2012)
- Place of Presentation
  Chennai, India
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] そぎ落としせん断試験による遮熱被膜の付着強度評価2012
- Author(s)
  金子堅司, 大矢将人
- Organizer
  日本機械学会M&M2012（材料力学カンファレンス）
- Place of Presentation
  愛媛大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] ねじりピンテスト法による溶射被膜の剥離強度評価に関する研究2012
- Author(s)
  金子堅司, 檜垣圭太朗
- Organizer
  日本機械学会第20回機械材料・材料加工技術講演会(M&P2012)
- Place of Presentation
  大阪工業大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] そぎ落としせん断試験によるWC-Co溶射被膜の付着強度評価2012
- Author(s)
  金子堅司, 三輪真吾,松崎拓也
- Organizer
  日本機械学会M&M2012（材料力学カンファレンス）
- Place of Presentation
  愛媛大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] Delamination Fatigue Strength Evaluation of Thermal Sprayed Coating by Torsion Pin-test Method2012
- Author(s)
  Kenji KANEKO, Keitaro HIGAKI and Koki HAYASHI
- Organizer
  the 5th Asian Thermal Spray Conference (ATSC 2012)
- Place of Presentation
  Tsukuba, Japan
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] ねじりピンテスト法によるWC-Co溶射被膜の付着疲労強度評価2012
- Author(s)
  金子堅司，檜垣圭太朗，林　鴻希
- Organizer
  日本材料学会第61期学術講演会
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] Adhesive Strength Evaluation of Thermal Sprayed Coating by Torsion Pin-test Method2011
- Author(s)
  Kenji Kaneko
- Organizer
  JSME/ASME
- Place of Presentation
  Corvallis, Oregon, USA
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] 遮熱被膜のそぎ落としせん断試験による付着強度評価に関する研究2011
- Author(s)
  金子堅司, 三輪真吾
- Organizer
  日本材料学会
- Place of Presentation
  大阪大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] ねじりピンテスト法による溶射被膜の付着強度評価に関する研究2011
- Author(s)
  金子堅司, 檜垣圭太朗,野澤利恵
- Organizer
  日本機械学会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] 遮熱被膜の高温におけるはく離発生および進展挙動に関する研究2010
- Author(s)
  金子堅司・近藤英明
- Organizer
  日本機械学会第18回機械材料・材料加工技術講演会(M&P2010)講演論文集
- Place of Presentation
  東京大学(CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] 遮熱被膜の高温におけるはく離発生および進展挙動に関する研究2010
- Author(s)
  金子堅司・近藤英明
- Organizer
  日本機械学会M&P2010(機械材料・材料加工講演会)
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] ねじりピンテスト法による溶射被膜の付着強度評価に関する研究2010
- Author(s)
  金子堅司・檜垣圭太朗
- Organizer
  日本機械学会M&M2010(材料力学カンファレンス)
- Place of Presentation
  長岡
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] そぎ落としせん断試験による遮熱被膜の付着強度評価2010
- Author(s)
  金子堅司・大矢将人
- Organizer
  日本機械学会M&M2010(材料力学カンファレンス)
- Place of Presentation
  長岡
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] 熱負荷を受けた遮熱被膜のせん断疲労破壊とはく離機構に関する研究2009
- Author(s)
  金子堅司・高藤聡・榎本和城
- Organizer
  日本機械学会第17回機械材料・材料加工技術講演会
- Place of Presentation
  富山・国際会議場
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] 熱負荷を受けた遮熱被膜のせん断疲労破壊とはく離機構に関する研究2009
- Author(s)
  金子堅司・高藤聡・榎本和城
- Organizer
  日本機械学会第17回機械材料・材料加工技術講演会
- Place of Presentation
  富山・国際会議場
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] 遮熱被膜の付着強度と残留応力に及ぼす高温酸化の影響2008
- Author(s)
  金子堅司, 榎本和城
- Organizer
  日本材料学会講演会
- Place of Presentation
  鹿児島大学
- Year and Date
  2008-05-25
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] 遮熱被膜の付着強度と残留応力に及ぼす高温酸化の影響2008
- Author(s)
  金子堅司・榎本和城
- Organizer
  日本材料学会講演会講演論文集(287-288)
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] ねじりピンテスト法による溶射被膜の付着強度評価の研究2008
- Author(s)
  金子堅司, 榎本和城
- Organizer
  日本機械学会材料力学講演会
- Place of Presentation
  草津・立命館大学
- Year and Date
  2008-09-16
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] ねじりピンテスト法による溶射被膜の付着強度評価に関する研究
- Author(s)
  金子堅司・榎本和城
- Organizer
  日本機械学会材料力学講演会(OS0805)
- Place of Presentation
  (CD-ROM)
- Data Source
  KAKENHI-PROJECT-20560087
[Presentation] ねじりピンテスト法による遮熱被膜のせん断付着強度評価
- Author(s)
  金子堅司
- Organizer
  日本材料学会高温強度シンポジウム
- Place of Presentation
  ホテルセントヒル長崎
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] WC-12Co溶射被膜のせん断剥離強度の実験的検討
- Author(s)
  金子堅司, 岩崎剛，三輪真吾
- Organizer
  日本機械学会2013年度年次大会講演論文集
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] WC-12Co溶射被膜のせん断剥離強度の解析的検討
- Author(s)
  金子堅司,三輪真吾
- Organizer
  日本機械学会2013年度年次大会講演論文集
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PROJECT-23560098
[Presentation] ねじりピンテスト法による遮熱被膜の付着強度評価
- Author(s)
  金子堅司,田沼遊太郎
- Organizer
  日本機械学会M&M2013（材料力学カンファレンス）講演論文集
- Place of Presentation
  岐阜大学
- Data Source
  KAKENHI-PROJECT-23560098

1. KIKUCHI Masanori (90107540)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
2. MACHIDA Kenji (50089380)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. OKUMURA Hiroyuki (00010679)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. NAKASONE Yuuji (10266918)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. CHEN Daiheng (90217266)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 有山堯 (60084399)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 荒井正行 (40371314)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results

KANEKO Kenji 金子 堅司

金子 賢二 カネコ ケンジ

金子 堅司 カネコ ケンジ

Research Projects

Research Products

Co-Researchers

Evaluation of delamination strength and thermal conductivity of porous thermal barrier coating for super high temperature gas turbine in the next generationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Influence of thermal loading on adhesive strength of thermal barrier coating applied to super high temperature gas turbinPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Delamination Fatigue Strength of Thermal Barrier Coating at Elevated TemperaturePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Influence of Oxidation and Thermal Cycling on Bonding Strength of Thermal Barrier Coating at Elevated TemperaturePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

生分解性プラスチックの非弾性変形・強度に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the meso-scopic fracture mechanics based on the non-uniform micro-mechanism of metals.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STUDY ON INELASTIC CONSTITUTIVE EQUATIONS OF METALS CONSIDERING OF TEMPERATURE DEPENDENCY OF VISCOSITY AND AGINGPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ひずみ時効を考慮した非弾性構成モデルに関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

金属基複合材料の高温非弾性変形特性とセラミック被覆皮膜の高温接合強度評価Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

核融合炉第一壁材料の高温破壊強度--セラミックス・コーティング壁材の高温強度--Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

[Journal Article] Evaluation of deformation properties of porous thermal barrier coatings by indentation method2018

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Evaluation of the Shearing Strength of a WC-12Co Thermal Spray Coating by the Scraping Test Method,2015

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of Shear Delamination Strength of Thermal Barrier Coating After Heating by Torsion Pin-Test Method2015

Author(s)

KANEKO Kenji 金子堅司

金子賢二カネコケンジ

金子堅司カネコケンジ