• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

SAKAI Taku  酒井 拓

ORCIDConnect your ORCID iD *help
… Alternative Names

酒井 拓  サカイ タク

Less
Researcher Number 40017364
Other IDs
External Links
Affiliation (based on the past Project Information) *help 2000 – 2007: 電気通信大学, 電気通信学部, 教授
1994 – 1998: 電気通信大学, 電気通信学部, 教授
1988: 電気通信大学, 電気通信学部, 教授
Review Section/Research Field
Principal Investigator
Material processing/treatments / Material processing/treatments / 金属加工(含鋳造) / Science and Engineering
Except Principal Investigator
Material processing/treatments / Material processing/treatments
Keywords
Principal Investigator
結晶粒微細化 / 動的再結晶 / 高温変形 / 微細粒組織 / 温間,冷間加工 / キンクバンド / 結晶粒分割 / 連続再結晶 / 多軸鍛造加工 / Fine-grained structure … More / Grain fragmentation / Microshear band / マイクロシアバンド / Thermomechanical treatment / Grain refinement / Dynamic recrystallization / 加工熱処理 / 焼なまし / ミクロシアバンド / 焼きなまし / 冷間加工 / 7075アルミニウム合金 / 粒界すべり / 未再結晶組織 / 動的連続再結晶 / 超塑性 / Anneasling / Continuous dynamic recrystallization / Kink band / Multi-directional forging / Severe plastic deformation / 連続動的再結晶 / 大ひずみ加工 / Continuous recrystallization / kink bands / Multidirectional forging / Warm and cold working / Hot working / 結晶粒内分割 / 温間、冷間加工 / 高温加工 / Iron and steels / Ferritic grain / Austenitic grain / Static recrystallization / Dynamic phase transformation / 動的相変態 / 静的回復・再結晶 / 静的、動的相変態 / α粒組織 / 鉄鋼材料 / 静的,動的相変態 / 静的再結晶 / Martensite transformation / Diffusion transformation / Dislocation substructure / Dynamic recovery / Hot Deformation / マルテンサイト組織 / 動的再結晶組織 / 動的回復組織 / マルテンサイト変態 / 拡散相変態 / 転位下部組織 / 動的回復 / 粒界破壊 / 中間温度脆性 / ニッケル基合金 / 双晶境界 / ミクロせん断帯 … More
Except Principal Investigator
kink band / texture / continuous dynamic recrystallization / 結晶粒微細化 / AZ31マグネシウム合金 / 超塑性 / Mg alloy AZ31 / grain growth / annealing / fine grain / multi-directional forging(MDF) / マグネシウム合金 / 集合組織 / AZ31Mg合金 / 粒成長 / 焼なまし / 連続再結晶 / キンクバンド / 大ひずみ加工 / 多軸鍛造 / structure control / precipitates / steel / malti directional forging / severe plastic deformation / grain refinement / 鉄合金 / 動的回復 / 第二相粒子 / 熱的安定性 / 超微細粒 / 結晶粒 微細化 / 組織制御 / 析出物 / 鋼 / 多軸鍛造法 / 強ひずみ加工 / 結晶微粒細化 / aluminum and magnesium alloys / grain boundary sliding / misorientation / new grain evolution / superplasticity / SUPRAL100、7075アルミニウム合金 / 動的連続再結晶 / 7075アルミニウム合金 / キンク帯 / 方位差 / 粒界すべり / 結晶粒細粒化 / 連続動的再結晶 Less
  • Research Projects

    (11 results)
  • Research Products

    (86 results)
  • Co-Researchers

    (7 People)
  •  加工誘起微細粒材料の形成プロセス制御並びに熱的安定性Principal Investigator

    • Principal Investigator
      三浦 博己, 酒井 拓
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Review Section
      Science and Engineering
    • Research Institution
      The University of Electro-Communications
  •  Mechanisms of strain-induced grain structure formation-Reconsideration of recrystallizationPrincipal Investigator

    • Principal Investigator
      SAKAI Taku
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications
  •  The Characteristics and Mechanisms of Ultra-Fine Grained Structure Formation during Severe Large Deformation.Principal Investigator

    • Principal Investigator
      SAKAI Taku
    • Project Period (FY)
      2004 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications
  •  Development of High Strength Wrought Magnesium Alloy by Multidirectional Forging under Decreasing Temperature Conditions

    • Principal Investigator
      YANG Xuyue
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications
  •  Production of super steel by multi directional forging

    • Principal Investigator
      MIURA Hiromi
    • Project Period (FY)
      2002 – 2003
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications
  •  Mechanism of Continuous Recrystallization under Superplasticity

    • Principal Investigator
      YANG Xuyue
    • Project Period (FY)
      2000 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications
  •  動的連続再結晶と超塑性発現に関する研究Principal Investigator

    • Principal Investigator
      酒井 拓
    • Project Period (FY)
      1998
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas (A)
    • Research Institution
      The University of Electro-Communications
  •  動的連続再結晶と超塑性に関する研究Principal Investigator

    • Principal Investigator
      酒井 拓
    • Project Period (FY)
      1997
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Research Institution
      The University of Electro-Communications
  •  Microstructural Control by Dynamic Recrystallization and Phase TransformationPrincipal Investigator

    • Principal Investigator
      SAKAI Taku
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications (UEC)
  •  Phase Transformation of Dynamically Recrystallized AustenitePrincipal Investigator

    • Principal Investigator
      SAKAI Taku
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Material processing/treatments
    • Research Institution
      The University of Electro-Communications (UEC)
  •  Ni基合金の中間温度脆性と加工性改善に関する研究Principal Investigator

    • Principal Investigator
      酒井 拓
    • Project Period (FY)
      1988
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属加工(含鋳造)
    • Research Institution
      The University of Electro-Communications

All 2009 2008 2007 2006 2005 2004 2003

All Journal Article Presentation

  • [Journal Article] Continuous Dynamic Recrystallization during the Transient Severe Deformation of Aluminum Alloy 7475 at High Temperature2009

    • Author(s)
      T. Sakai, H. Miura, A. Goloborodko, O. Sitdikov
    • Journal Title

      Acta Materialia 57

      Pages: 153-162

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Ultrafine Grain Formation during Severe Plastic Deformation2009

    • Author(s)
      T. Sakai, H. Miura, X. Yang
    • Journal Title

      Mater. Sci. Eng. A 499

      Pages: 2-6

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Microstructural Behavior of Al-Mg-Sc Alloy Processed by ECAP at Elevated Temperatures2008

    • Author(s)
      O., Sitdikov, T., Sakai, E., Avtokratova, R., Kaibyshev, K., Tsuzaki, Y., Watanabe
    • Journal Title

      Acta Mater 56

      Pages: 821-834

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Mechanical Properties of Magnesium Alloy AZ31 after Sever Plastic Deformation2008

    • Author(s)
      J. Xing, X. Yang, H. Miura and T. Sakai
    • Journal Title

      Materials Transaction 49

      Pages: 69-75

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Grain refinement in aluminum alloy 2219 during ECAP at 250℃2008

    • Author(s)
      I. Mazurina, T.Sakai, H. Miura, O. Sitdikov, R. Kaibyshev
    • Journal Title

      Mater. Sci. Eng.A, 473

      Pages: 287-305

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Microstructural Behavior of Al-Mg-Sc Alloy Processed bY ECAP at Elevated Temperatures2008

    • Author(s)
      O. Sitdikoy, T. Sakai, E. Avtokratova, R.Kaibyshev, K. Tsuzaki, Y. Watanabe
    • Journal Title

      Acta Mater. 56

      Pages: 821-834

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Mechanical Properties of Magnesium Alloy AZ31 after Sever Plastic Deformation2008

    • Author(s)
      J. Xing, X. Yang, H.Miura, T. Sakai
    • Journal Title

      Materials Transaction 49

      Pages: 69-75

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Continuous Static Recrystallization of Ultrafine Grained Copper Processed by Multi-Directional Forging2008

    • Author(s)
      A. Takayama, X. Yang, H. Miura and T. Sakai
    • Journal Title

      Mater. Sci. Eng. A 478

      Pages: 221-228

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Grain refinement in aluminum alloy 2219 during ECAP at 250℃2008

    • Author(s)
      I.Mazurina, T., Sakai, H., Miura, 0., Sitdikov, R., Kaibyshev
    • Journal Title

      Mater. Sci. Eng. A 473

      Pages: 287-305

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Stimulated Grain Refinement of Ni-Fe Alloy by Coarse Precipitates during Hot Multi-Directional Forging2007

    • Author(s)
      H.Miura, T.Sakai, T.Ueno, N.Fujita, Y.Yoshinaga
    • Journal Title

      Materials Science Forum 550

      Pages: 271-276

    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Microstructural Changes in As-Cast 7475 Al Alloy during Warm Severe Forging2007

    • Author(s)
      A., Goloborodko, T., Sakai, O., Sitdikov, H., Miura
    • Journal Title

      Materials Science Forum 539-543

      Pages: 2922-2927

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Nucleation of Dynamic Recrystallization and Valiant Selection in Copper Bicrystals2007

    • Author(s)
      H. Miure, T. Sakai, R. Mogawa, J.J.Jonas
    • Journal Title

      Phil.Mag. 87

      Pages: 4197-4209

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Microstructural Evolution in a Commercial Al-Mg-Sc Alloy during ECAP at 300C2007

    • Author(s)
      O., Sitdikov, T., Sakai, E., Avtokratova, R. Kaibyshev, T., Tsuzaki, Y., Watanabe
    • Journal Title

      Materials Science Forum 558-559

      Pages: 569-574

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Enhanced Grain Refinement Induced by Deformation Twining during Multi-Directional Forging of Cu and Cu-Zu Alloy2007

    • Author(s)
      H. Miura, H. Nakao, T. Sakai
    • Journal Title

      Materials Transaction 48

      Pages: 2539-2541

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Recrystallization Behavior of Ultra Fine-Grained Structure Induced by Mechanical Twinning in Cu-Zn Alloy2007

    • Author(s)
      Y., Nakao, H., Miura, T., Sakai
    • Journal Title

      Materials Science Forum 558-559

      Pages: 1329-1334

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Ultra-Fine Grain Development in Copper during Multi-Directional forging at 195K2007

    • Author(s)
      C. Kobayashi, T. Sakai, A. Belyakov, X. Yang and H. Miura
    • Journal Title

      Phil. Mag. Letters 87

      Pages: 751-766

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Effect of Initial Grain Size and Strain Path on Grain Refinement in Magnesium Alloy AZ312007

    • Author(s)
      X., Yang, H., Miura, T., Sakai
    • Journal Title

      Materials Science Forum 539-543

      Pages: 1632-1637

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Stimulated Grain Refine-ment of Ni-Fe Alloy by Coarse Precipitates during Hot Multi-Directional Forging2007

    • Author(s)
      H., Miura, T., Sakai, T., Ueno, N., Fujita, Y., Yoshinaga
    • Journal Title

      Materials Science Forum 550

      Pages: 271-276

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Superplasticity of Magnesium Alloy AZ31 Processed by Multi-Directional Forging2007

    • Author(s)
      J.Xing, X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Transactions 48(in press)

    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Ultra-Fine Grain Development in Copper during Multi-Directional forging at 195K2007

    • Author(s)
      C. Kobayashi, T. Sakai, A. Belyakov, X. Yang, H. Miura
    • Journal Title

      Phi1.Mag.Letters 87

      Pages: 751-766

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] 銅の冷間,高温加工中と加工後の連続・不連続再結晶(基調講演論文)2007

    • Author(s)
      酒井 拓
    • Journal Title

      銅と銅合金 46

      Pages: 1-6

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Journal Article] Ultra-Fine Grain Development in Copper during Multi-Directional forging at 195K2007

    • Author(s)
      C. Kobayashi, T. Sakai, A. Belakov, X. Yang and H. Miura
    • Journal Title

      Phil. Mag. Letters 87

      Pages: 751-766

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] マグネシウム合金AZ31の多軸鍛造による大ひずみ加工と機械的特性2007

    • Author(s)
      刑 剋, 楊続躍, 三浦博己, 酒井拓
    • Journal Title

      塑性と加工 48(5)(in press)

    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Microstructural Evolution at Grain Boundary in a Copper Bicrystal during Multi-Directional Forging2007

    • Author(s)
      H., Miura, Y., Yoshida, T., Sakai
    • Journal Title

      Voprosy Materialo Lovedenija (Problems of Materials Science) N4 52)

      Pages: 24-29

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] 銅の冷間,高温加工中と加工後の連続・不連続再結晶(基調講演論文)2007

    • Author(s)
      酒井 拓
    • Journal Title

      銅と銅合金 46

      Pages: 1-6

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Annealing of Deformed Materials Developed by Continuous/ Discontinuous Dynamic Recrystallization2007

    • Author(s)
      T., Sakai, H., Miura
    • Journal Title

      Materials Science Forum 550

      Pages: 327-332

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Enhanced Grain Refinement Induced by Deformation Twining during Multi-Directional Forging of Cu and Cu-Zn Alloy2007

    • Author(s)
      H., Miura, H., Nakao, T., Sakai
    • Journal Title

      Trans Mater 48

      Pages: 2539-2541

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Grain Refinement in a Commercial Al-Mg-Sc Alloy under Hot ECAP Conditions2007

    • Author(s)
      O., Sitdikov, T., Sakai, E., Avtokratova, R. Kaibyshev, Y., Kimra, K., Tsuzaki
    • Journal Title

      Mater. Sci. Engin. A 444

      Pages: 18-30

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] UltraFine Grain Development in Copper during Multidirectional forging at 195K2007

    • Author(s)
      C., Kobayashi, T., Sakai, A., Belyakov, H., Miura
    • Journal Title

      Phil. Mag. Letters 87

      Pages: 751-766

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Annealing of Deformed Materials Developed by Continuous/Discontinuous Dynamic Recrystallization2007

    • Author(s)
      T.Sakai, H.Miura
    • Journal Title

      Materials Science Forum 550

      Pages: 327-332

    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Microstructural Evolution and Recrystallization Behavior in Copper Multi-Directionally Forged at 77K2007

    • Author(s)
      Y., Nakao, H., Miura, T., Sakai
    • Journal Title

      Advanced Materials Research 15-17

      Pages: 649-654

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Superplasticity of Magnesium Alloy AZ31 Processed by Multi-Directional Forging2007

    • Author(s)
      J., Xing, X.,. Yang, H., Miura, T., Sakai
    • Journal Title

      Mater. Trans 48

      Pages: 1406-1411

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Effect of Defor-mation Temperature on Microstructure Evolution in 2219 Aluminum Alloy during ECAP2007

    • Author(s)
      I.Mazurina, O., Sitdikov, R. O., Kaibyshev, H., Miura, T., Sakai
    • Journal Title

      Materials Science Forum 558-559

      Pages: 545-550

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Journal Article] Strain Rate Effect on Fine Grain Development in 7475 Aluminum Alloy during Hot Multidirectional Forging2006

    • Author(s)
      A.Goloborodko, O.Sitdikov, R.Kaibyshev, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 503-504

      Pages: 505-510

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Second Phase Particles on Ultra-Fine Grain Evolution during Multi-Directional Forging of Austenitic Stainless Steel2006

    • Author(s)
      H.Miura, H.Hamaji, T.Sakai, N.Fujita, Y.Yoshinaga
    • Journal Title

      Materials Science Forum 503-504

      Pages: 293-298

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] High Angle Boundary Formation in Dynamically Recovered Material during Severe Plastic Deformation2006

    • Author(s)
      Taku Sakai
    • Journal Title

      Ultrafine Grained Materials IV., (eds. Y.T.Zhu, T.G.Langdon, Z.Horita, et al.)(TMS)

      Pages: 73-80

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] High Angle Boundary Formation in Dynamically Recovered Material during Severe Plastic Deformation2006

    • Author(s)
      Taku Sakai
    • Journal Title

      Ultrafine Grained Materials IV. (eds. Y.T.Zhu, T.G.Langdon, Z.Horita, et al.) TMS

      Pages: 73-80

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Grain Refinement in Magnesium Alloy AZ31 during Multidirectional Forging under Decreasing Temperature Conditions2005

    • Author(s)
      J.Xing, X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 488-489

      Pages: 597-600

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Ultra-Fine Grain Development in Magnesium Alloy AZ31 during Severe Large Forging under Decreasing Temperature Conditions2005

    • Author(s)
      J.Xing, Y.Soda, X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Transactions 46

      Pages: 1646-1650

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Evolution of Fine-Grained Structures in Cu-Fe-Cr Alloy by Severe Plastic Deformation.2005

    • Author(s)
      H.Miura, T.Sakai
    • Journal Title

      J.of the JRICu 44

      Pages: 68-72

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Ultra-Fine Grain Development in Magnesium Alloy AZ31 during Severe Large Forging under Decreasing Temperature Conditions2005

    • Author(s)
      J.Xing, Y.Soda, X.Yang, H.Miura, T.Sakai
    • Journal Title

      Mater.Trans. 46

      Pages: 1646-1650

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Initial Grain Size on Deformation Behavior and Dynamic Recrystallizaion of Mg Alloy AZ312005

    • Author(s)
      X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 488-489

      Pages: 223-226

    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Isochronal Annealing Behavior of Magnesium Alloy AZ31 after Hot Deformation2005

    • Author(s)
      X.Yang, H.Miura, T.Sakai
    • Journal Title

      Mater.Trans. 46

      Pages: 2981-2987

    • NAID

      10017150635

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Initial Grain Size on Deformation Behavior and Dynamic Recrystallization of Mg Alloy AZ312005

    • Author(s)
      X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 488-489

      Pages: 223-226

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Effect of Initial Grain Size on Deformation Behavior and Dynamic Recrystallization of Mg Alloy AZ312005

    • Author(s)
      X.Yang.H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum Vol.488-489

      Pages: 223-226

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Superplasticity in a 7055 aluminum alloy processed by ECAE and subsequent isothermal rolling2005

    • Author(s)
      I.Nikulin, R.Kaibyshev, T.Sakai
    • Journal Title

      Mater.Sci.Engin.A 407

      Pages: 62-70

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Superplasticity in a 7055 aluminum alloy processed by ECAE and subsequent isothermal rolling2005

    • Author(s)
      I Nikulin, R.Kaibyshev, T.Sakai
    • Journal Title

      Materials Science Engineering A 407

      Pages: 62-70

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Initial Grain Size on Deformation Behavior and Dynamic Recrystallization of Magnesium Alloy AZ312005

    • Author(s)
      X.Yang, M.Sanada, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 488-489

      Pages: 223-226

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Orientation Dependence of Ductility of Mg single Crystals at Elevated Temperature2005

    • Author(s)
      H.Miura, T.Sakai, H.Nogawa, X.Yang, S.Miura
    • Journal Title

      Materials Science Forum Vol.488-489

      Pages: 193-196

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Grain refinement in coarse-grained 7475 Al alloy during severe hot forging2005

    • Author(s)
      O.Sitdikov, T.Sakai, A.Goloborodko, H.Miura, R.Kaibyshev
    • Journal Title

      Philosophical Magazine 85

      Pages: 1159-1175

    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Orientation Dependence of Ductility of Mg single Crystals at Elevated Temperature2005

    • Author(s)
      H.Miura, T.Sakai, H.Nogawa, X.Yang, S.Miura
    • Journal Title

      Materials Science Forum 488-489

      Pages: 193-196

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Grain Refinement in Magnesium Alloy AZ31 during Multidirectional Forging under Decreasing Temperature Conditions2005

    • Author(s)
      J.Xing, X.Yang.H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum Vol.488-489

      Pages: 597-600

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Isochronal Annealing Behavior of Magnesium Alloy AZ31 after Hot Deformation2005

    • Author(s)
      X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Transactions 46

      Pages: 2981-2987

    • NAID

      10017150635

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Strain Rate on the Formation of Fine-Grained Micro- structure in a Cast Aluminum Alloy upon Hot Upsetting2005

    • Author(s)
      O.Sitdikov, A.N.Goloborodko, R.O.Kaibyshev, H.Miura, T.Sakai
    • Journal Title

      The Physics of Metals and Metallography 45

      Pages: 106-117

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Orientatino Dependence of Ductility of Mg single Crystals at Elevated Temperature2005

    • Author(s)
      H.Miura, T.Sakai, H.Nogawa, X.Yang, S.Miura
    • Journal Title

      Materials Science Forum 488-489

      Pages: 193-196

    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Effect of Strain Rate on the Formation of Fine-Grained Microstructure in a Cast Aluminum Alloy 7475 upon High-Temperature Upsetting2005

    • Author(s)
      O.Sitdikov, A.N.Goloborodko, R.O.Kaibyshev, H.Miura, T.Sakai
    • Journal Title

      The Physics of Metals and Metallography 45

      Pages: 106-117

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] AZ31マグネシウム合金の降温中多軸鍛造による微細粒組織の生成2005

    • Author(s)
      ケイ 剋, 惣田裕司, 揚続躍, 三浦博己, 酒井拓
    • Journal Title

      軽金属 54

      Pages: 527-531

    • NAID

      10014033539

    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Superplasticity in a 7055 aluminum alloy processed by ECAE and subsequent isothermal rolling2005

    • Author(s)
      I Nikulin, R.Kaibyshev, T.Sakai
    • Journal Title

      Mater.Sci.Engin.A 407

      Pages: 62-70

    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Grain refinement in coarse-grained 7475 Al alloy during severe hot forging2005

    • Author(s)
      O.Sitdikov, T.Sakai, A.Goloborodko, H.Miura, R.Kaibyshev
    • Journal Title

      Philoophical.Magazine 85

      Pages: 1159-1175

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] 析出強化Cu-Fe-Cr合金の強ひずみ加工による微視組織の発達2005

    • Author(s)
      三浦博己, 酒井拓
    • Journal Title

      銅と銅合金 44

      Pages: 68-72

    • NAID

      40007092288

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Grain refinement in coarse-grained 7475 Al alloy during severe hot forging2005

    • Author(s)
      O.Sitdikov, T.Sakai, A.Goloborodko, H.Miura, R.Kaibyshev
    • Journal Title

      Philos.Mag. 85

      Pages: 1159-1175

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] New Grain Formation in a Coarse-Grained 7475 Al Alloy during Severe Hot Forging2004

    • Author(s)
      O.Sitdikov, T.Sakai, A.Goloborodko, H.Miura, R.Kaibyshev
    • Journal Title

      Materials Science Forum 467-470

      Pages: 421-426

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] 析出強化Cu-Cr合金の強ひずみ加工による超微細粒組織形成とその特性2004

    • Author(s)
      三浦博己, 酒井拓
    • Journal Title

      銅と銅合金 43

      Pages: 56-60

    • NAID

      40006369151

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Isochronal Annealing Behaviors of Magnesium Alloy AZ31 After Hot Deformation2004

    • Author(s)
      X.Yang.H.Miura, T.Sakai
    • Journal Title

      Journal of Japan Inst.of Metals Vol.41

      Pages: 476-484

    • NAID

      10014124155

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Ultra-fine grain formation in BCC/FCC Stainless Steels during Severe Large Forging2004

    • Author(s)
      T.Sakai, H.Miura, K.Usui, T.Koba
    • Journal Title

      Evolution of Deformation Microstructures in 3D, (Eds. By G.Gunlach et al.)(Riso National Lab.)

      Pages: 509-514

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Pressing Temperature on Fine-Grained Structure Formation in 7475 Aluminum Alloy during ECAP2004

    • Author(s)
      A.Goloborodko, O.Sitdikov, R.Kaibyshev, H.Miura, T.Sakai
    • Journal Title

      Materials Science Eng.A 381

      Pages: 121-128

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Pressing Temperature on Fine-Grained Structure Formation in 7475 Aluminum Alloy during ECAP2004

    • Author(s)
      A.Goloborodko, O.Sitdikov, R.Kaibyshev, H.Miura, T.Sakai
    • Journal Title

      Materials Science Engineering A 381

      Pages: 121-128

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Grain Refinement in Magnesium Alloy AZ31 during Hot Deformation2004

    • Author(s)
      X.Yang, J.Xing, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 467-470

      Pages: 531-536

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Effect of Pass Strain on Grain Refinement in 7475 Al Alloy during Hot Multidirectional Forging2004

    • Author(s)
      O.Sitdikov, T.Sakai, A.Goloborodko, H.Miura, R.Kaibyshev
    • Journal Title

      Materials Transactions 45

      Pages: 2232-2238

    • NAID

      10013337141

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Ultra-Fine Grain Formation in BCC/FCC Stainless Steels during Severe Large Forging2004

    • Author(s)
      T.Sakai, H.Miura, K.Usui, T.Koba
    • Journal Title

      Evolution of Deformation Microstructures in 3D (Riso)

      Pages: 509-514

    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] AZ31マグネシウム合金の降温下多軸鍛造による微細粒組織の生成2004

    • Author(s)
      〓 劼, 惣田裕司, 楊 続躍, 三浦博己, 酒井 拓
    • Journal Title

      軽金属 54

      Pages: 527-531

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] AZ31マグネシウム合金の降温下多軸鍛造による微細粒組織の生成2004

    • Author(s)
      〓 劼 惣田裕司, 楊 続躍, 三浦博己, 酒井 拓
    • Journal Title

      軽金属 54

      Pages: 527-531

    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Grain Refinement in Magnesium Alloy AZ31 during Multi-Directional Forging under Decreasing Temperature Conditions2004

    • Author(s)
      J.Xing, S.Hiroshi, X.Yang, H.Miura, T.Sakai
    • Journal Title

      Journal of Japan Inst.of Light Metals Vol.54

      Pages: 527-531

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Grain Refinement in Magnesium Alloy AZ31 during Hot Deformation2004

    • Author(s)
      X.Yang.H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum Vol.467-470

      Pages: 531-536

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] 高温加工マグネシウム合金AZ31の等時間焼なまし特性2004

    • Author(s)
      楊 続躍, 三浦博己, 酒井 拓
    • Journal Title

      日本金属学会誌 41

      Pages: 476-484

    • NAID

      10014124155

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Grain Refinement in Magnesium Alloy AZ31 during Hot Deformation2004

    • Author(s)
      X.Yang, H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum 467-470

      Pages: 531-536

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Effect of Pass Strain on Grain Refinement in 7475 Al Alloy during Hot Multidirectional Forging2004

    • Author(s)
      O.Sitdikov, T.Sakai, A.Goloborodko, H.Miura, R.Kaibyshev
    • Journal Title

      Mater.Trans. 45

      Pages: 2232-2238

    • NAID

      10013337141

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Ultra-fine grain formation in BCC/FCC Stainless Steels during Severe Large Forging2004

    • Author(s)
      T.Sakai, H.Miura, K.Usui, T.Koba
    • Journal Title

      Evolution of Deformation Microstructures in 3D, (Riso National Lab.)(eds. By G.Gunlach et al.)

      Pages: 509-514

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560627
  • [Journal Article] Initial Grain Size Effect of Dynamic Recrystallization of Magnesium Alloy AZ312003

    • Author(s)
      X.Yang.H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum Vol.426

      Pages: 611-616

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Dynamic Nucleation of New Grains in Magnesium Alloy during Hot Deformation2003

    • Author(s)
      X.Yang.H.Miura, T.Sakai
    • Journal Title

      Materials Science Forum Vol.419

      Pages: 515-520

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Journal Article] Dynamic Evolution of New Grains in Magnesium Alloy during Hot Deformation2003

    • Author(s)
      X.Yang.H.Miura, T.Sakai
    • Journal Title

      Materials Trans. Vol.44

      Pages: 179-203

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560623
  • [Presentation] マグネシウム合金の加工熱処理による組織制御(基調講演)2008

    • Author(s)
      酒井拓, 三浦博己
    • Organizer
      軽金属学会第115回秋期大会講演大会
    • Place of Presentation
      工学院大学
    • Year and Date
      2008-11-15
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Presentation] Ultrafine Grain Formation during Severe Plastic Deformation (Plenary invited)2007

    • Author(s)
      T. Sakai
    • Organizer
      The 5th lnternational Conference on Physical and Numerical Simulation of Materials Processing
    • Place of Presentation
      Zhengzhou, China
    • Year and Date
      2007-10-23
    • Data Source
      KAKENHI-PROJECT-19025004
  • [Presentation] Ultrafine Grain Formation during Severe Plastic Deformation (Keynote invited)2007

    • Author(s)
      T., Sakai
    • Organizer
      A plenary lecture in the 5th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS'2007)
    • Place of Presentation
      Zhengzhou, China
    • Year and Date
      2007-10-06
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Presentation] Ultrafine Grain Formation during Severe Plastic Deformation(Plenary invited)2007

    • Author(s)
      T. Sakai
    • Organizer
      The 5th International Conference on Physical and Numerical Simulation of Materials Processing
    • Place of Presentation
      Zhengzhou, China
    • Year and Date
      2007-10-23
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560689
  • [Presentation] マグネシウム合金AZ31の大ひずみ加工による組織制御と機械的特性(基調講演)2007

    • Author(s)
      酒井拓, 〓〓, 楊続躍, 三浦博己
    • Organizer
      日本金属学会, 第142回秋期講演大会講演概要集
    • Place of Presentation
      岐阜大学
    • Year and Date
      2007-10-23
    • Data Source
      KAKENHI-PROJECT-19025004
  • 1.  MIURA Hiromi (30219589)
    # of Collaborated Projects: 9 results
    # of Collaborated Products: 27 results
  • 2.  YANG Xuyue (20293128)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 23 results
  • 3.  橋本 稔 (60156297)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 4.  佐藤 公子 (30017321)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 5.  除 洲
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 6.  XU Zhou
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 7.  徐 洲
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi