KUBO AKIHIKO 久保明彦

… Alternative Names

KUBO Akihiko 久保明彦

久保明彦クボアキヒコ

KUBO Akihiro 久保明彦

Less

Researcher Number	40178025
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2012 – 2014: 北見工業大学, 工学部, 助教 2003 – 2006: 北見工業大学, 工学部, 助手 2000 – 2001: 北見工業大学, 工学部, 助手 1997 – 1998: 北見工業大学, 工学部, 助手 1994 – 1995: 北見工業大学, 工学部, 助手
Review Section/Research Field	Principal Investigator Production engineering/Processing studies Except Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies
Keywords	Principal Investigator GRINDING SIMULATION / CUTTING EDGE TRUNCATION / CRITICAL DEPTH OF CUT / SINGLE POINT DIAMOND CUTTING / SHAPE OF ABRASIVE CUTTING EDGE / DIAMOND ABRASIVE GRAIN / DUCTILE MODE GRINDING / OPTICAL BRITTLE MATERIAL / 光学用脆性材料 / 臨海切込み深さ … More / 研削シミュレーション / 切れ刃トランケーション / 臨界切込み深さ / 単粒ダイヤモンド切削 / 砥粒切れ刃形状 / ダイヤモンド砥粒 / 延性モード研削 / 光学用硬脆材料 / CBN小径砥石 / 内面研削 / CBN砥石 / 研削 / ドレッシング / ドレッシング抵抗 / 実質切込み量 / 砥石除去体積 / 砥石作業面粗さ / ドレッシングプロセス / シミュレーション / ロータリダイヤモンドドレッサ … More Except Principal Investigator 研削仕上面粗さ / 研削性能 / GRINDING WHEEL RADIAL WEAR / GROUND SURFACE ROUGHNESS / GRINDING FORCE / FREQUENCY ANALYSIS / SMALL CBN GRINDING WHEEL / INTERNAL GRINDING / METAL-BONDED DRESSER / ROTARY DIAMOND DRESSER / ドレッサ切込み量 / 接触点検出装置 / 機上形状修正 / 低速回転高剛性ドレッサ / 研削仕上げ面粗さ / ホイール半径摩耗 / 砥石作業面 / ロータリドレッサ / 砥石半径減耗量 / 研削抵抗 / 周波数解析 / CBN小径砥石 / 内面研削 / メタルボンドドレッサ / ロータリダイヤモンドドレッサ / Envelope Generation / Electro-Contact Discharge Dressing / Shape of Abrasive Cutting Edge / Cutting Edge Truncation / Grinding Simulation / Metal-Bonded Grinding Wheel / Ductile Regime Grinding / Optical Glass / トポグラフィの最適化 / 切れ刃形状 / モンテカルロ法 / 脆性材料 / メタルボンドホイール / 精密ツルーイング / 走査型レーザ顕微鏡 / ダイヤモンド砥粒 / 延性モード研削 / 包絡線創成法 / 接触放電ツルーイング / 砥粒切れ刃の立体形状 / 切れ刃トランケーション / 研削シミュレーション / メタルボンドダイヤモンドホイール / 延性モード加工 / 光学ガラス / ク-ラント効果 / YAGレーザ加工 / マイクロパタ-ニング / ホイール作業面 / cBN研削ホイール / 研削砥石 / 研削点温度 / 研削油剤供給状態 / 研削温度 / 流れの可視化 / マイクロパターニング / 研削液供給状態 / 研削用砥石作業面 / Truing / Grinding performance / Topography / YAG laser / Mounted grinding wheel / Electroplated CBN quill / 砥粒突出し量 / レーザビーム近接量 / 切れ刃密度 / 磁石表面トポグラフィ / ツル-イング / ダイヤモンド電着クイル / cBN電着クイル / 砥石ツル-イング / 切れ刃トポグラフィ / YAGレーザ / 軸付き小径砥石 / 電着CBNクイル Less

Optimal design of rotary diamond dresser based on quantitative evaluation using visualization support of dressing processPrincipal Investigator
- Principal Investigator
  
  KUBO AKIHIKO
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kitami Institute of Technology
EFFECT OF CUTTING EDGE SHAPE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTICAL BRITTLE MATERIALPrincipal Investigator
- Principal Investigator
  
  KUBO Akihiko
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  KITAMI INSTITUTE OF TECHNOLOGY
STABILIZATION OF DRESSING PERFORMANCE OF ROTARY DIAMOND DRESSER BY MEANS OF ON-THE-MACHINE PROFILE CONDITIONING
- Principal Investigator
  
  TAMAKI Junichi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  KITAMI INSTITUTE OF TECHNOLOGY
Ductile Regime Grinding of Hard and Brittle Materials Based on Optimum Design of Cutting Edge Truncation
- Principal Investigator
  
  TAMAKI Jun'ichi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kitami Institute of Technology
超高速研削用砥石作業面のマイクロパターニングによるクーラント効果の改善
- Principal Investigator
  
  田牧純一
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kitami Institute of Technology
Study on YAG laser-aided Dressing of Electroplated CBN Quill
- Principal Investigator
  
  TAMAKI Junichi
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kitami Institute of Technology

All 2015 2014 2013 2012 2006 2005 Other

All Journal Article Presentation

[Journal Article] 角柱ダイヤモンドロータリドレッサを用いたドレッシングプロセスの幾何学的解析2015
- Author(s)
  久保明彦, 田牧純一, ウラ　シャリフ
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 59巻4号 Pages: 197-204
- NAID
  130005097946
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24560121
[Journal Article] Computer-aided simulation of dressing using diamond rotary dresser and visualization of dressing process2014
- Author(s)
  A. Kubo, A.M.M. Sharif Ullah, J. Tamaki
- Journal Title
  
  Advanced Materials Research
  
  Volume: 1017 Pages: 592-597
- DOI
  10.4028/www.scientific.net/amr.1017.592
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560121
[Journal Article] Computer-aided simulation of dressing and visualization of the dressed surface of grinding wheel2014
- Author(s)
  久保明彦, 田牧純一, ウラ　シャリフ, 尾崎義治
- Journal Title
  
  Journal of the Japan Society for Abrasive Technology
  
  Volume: 58 Issue: 4 Pages: 253-259
- DOI
  10.11420/jsat.58.253
- NAID
  130004835710
- ISSN
  0914-2703, 1880-7534
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24560121
[Journal Article] Visualization of 3D Topography of Grinding Wheel Surface Dressing by Rotary Diamond Dresser2013
- Author(s)
  A. Kubo, M.A.K. Chowdhury, S. Noda, J. Tamaki, A.M.M. Sharif Ullah
- Journal Title
  
  Advanced Materials Research
  
  Volume: 797 Pages: 751-756
- DOI
  10.4028/www.scientific.net/amr.797.751
- NAID
  40019963019
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560121
[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON DUCTILE-REGIME GRINDING OF HARD AND BRITTLE MATERIALS2006
- Author(s)
  X.KANG, J.TAMAKI, A.KUBO
- Journal Title
  
  INT.JOURNAL OF MANUFACTURING TECHNOLOGY AND MANAGEMENT 9
  
  Pages: 183-200
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006
- Author(s)
  X.Kang, J.Tamaki, A.Kubo
- Journal Title
  
  Int. Journal of Manufacturing Technology and Management Vol. 9
  
  Pages: 183-200
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006
- Author(s)
  X.Kang, J.Tamaki, A.Kubo
- Journal Title
  
  Int. Journal of Manufacturing Technology and Management Vol.9
  
  Pages: 183-200
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] EFFECT OF CUTTING EDGE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTIC GLASS2005
- Author(s)
  J.TAMAKIT, G.SATO, K.MAEKAWA, J.YAN, A.KUBO
- Journal Title
  
  JOURNAL OF THE JAPAN SOCIETY FOR ABRASIVE TECHNOLOGY 49-6
  
  Pages: 335-340
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] Effect of cutting edge truncation on ground surface morphology of hard and brittle materials for optical devices2005
- Author(s)
  X.Kang, J.Tamaki, A.Kubo, J.Yan
- Journal Title
  
  Key Engineering Materials Vol.291-292
  
  Pages: 139-144
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] 光学ガラスの延性モード研削性能に及ぼすダイヤモンド砥粒切れ刃形状の影響2005
- Author(s)
  田牧純一, 佐藤元, 前川公貴, 閻紀旺, 久保明彦
- Journal Title
  
  砥粒加工学会誌 49巻6号
  
  Pages: 37-41
- NAID
  130004494367
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON GROUND SURFACE MORPHOLOGY OF HARD AND BRITTLE MATERIALS FOR OPTICAL DEVICES2005
- Author(s)
  X.KANG, J.TAMAKI, A.KUBO, J.YAN
- Journal Title
  
  KEY ENGINEERING MATERIALS 291-292
  
  Pages: 139-144
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Journal Article] 光学ガラスの延性モード研削性能に及ぼすダイヤモンド砥粒切れ刃形状の影響2005
- Author(s)
  田牧純一, 佐藤元, 前川公貴, 閻紀旺, 久保明彦
- Journal Title
  
  砥粒加工学会 49巻6号
  
  Pages: 335-340
- NAID
  130004494367
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560087
[Presentation] ロータリダイヤモンドドレッサで創成される砥石作業面の可視化2012
- Author(s)
  久保明彦，M.A.K Chowdhury，田牧純一，シャリフ　ウラ
- Organizer
  砥粒加工学会
- Place of Presentation
  同志社大学京田辺キャンパス（京都）
- Data Source
  KAKENHI-PROJECT-24560121
[Presentation] Computer-aided simulation of dressing using diamond rotary dresser and visualization of dressing process
- Author(s)
  A. Kubo, A.M.M. Sharif Ullah, J. Tamaki
- Organizer
  The 17th International Symposium on Advances in Abrasive Technology
- Place of Presentation
  Courtyard by Marriott King Kamehameha’s Kona Beach Hotel, Hawaii Island, Hawaii, USA.
- Year and Date
  2014-09-22 – 2014-09-25
- Data Source
  KAKENHI-PROJECT-24560121
[Presentation] ロータリダイヤモンドドレッサで創成される砥石作業面の３次元形状の可視化
- Author(s)
  久保明彦、M.A.K. Chowdhury、田牧純一、A.M.M. Sharif Ullah
- Organizer
  砥粒加工学会
- Place of Presentation
  日本大学理工学部駿河台キャンパス
- Data Source
  KAKENHI-PROJECT-24560121
[Presentation] 幾何学的手法によるドレッシングプロセスの可視化
- Author(s)
  久保明彦, 田牧純一, ウラ　シャリフ
- Organizer
  砥粒加工学会
- Place of Presentation
  岩手大学工学部（岩手県盛岡市）
- Year and Date
  2014-09-11 – 2014-09-13
- Data Source
  KAKENHI-PROJECT-24560121

1. TAMAKI Junichi (30005516)

# of Collaborated Projects: 5 results

# of Collaborated Products: 8 results
2. KITAGAWA Takeaki (40003165)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. YAN Jiwang (40323042)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

KUBO AKIHIKO 久保 明彦

KUBO Akihiko 久保 明彦

久保 明彦 クボ アキヒコ

KUBO Akihiro 久保 明彦

Research Projects

Research Products

Co-Researchers

Optimal design of rotary diamond dresser based on quantitative evaluation using visualization support of dressing processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

EFFECT OF CUTTING EDGE SHAPE OF DIAMOND ABRASIVE GRAIN ON DUCTILE MODE GRINDING OF OPTICAL BRITTLE MATERIALPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STABILIZATION OF DRESSING PERFORMANCE OF ROTARY DIAMOND DRESSER BY MEANS OF ON-THE-MACHINE PROFILE CONDITIONING

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ductile Regime Grinding of Hard and Brittle Materials Based on Optimum Design of Cutting Edge Truncation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超高速研削用砥石作業面のマイクロパターニングによるクーラント効果の改善

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on YAG laser-aided Dressing of Electroplated CBN Quill

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 角柱ダイヤモンドロータリドレッサを用いたドレッシングプロセスの幾何学的解析2015

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Computer-aided simulation of dressing using diamond rotary dresser and visualization of dressing process2014

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Computer-aided simulation of dressing and visualization of the dressed surface of grinding wheel2014

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Visualization of 3D Topography of Grinding Wheel Surface Dressing by Rotary Diamond Dresser2013

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] EFFECT OF CUTTING EDGE TRUNCATION ON DUCTILE-REGIME GRINDING OF HARD AND BRITTLE MATERIALS2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006

Author(s)

Journal Title

Data Source

[Journal Article] Effect of cutting edge truncation on ductile-regime grinding of hard and brittle materials2006

Author(s)

Journal Title

Description

KUBO AKIHIKO 久保明彦

KUBO Akihiko 久保明彦

久保明彦クボアキヒコ

KUBO Akihiro 久保明彦