SUZUKI Takashi 鈴木崇

Researcher Number	40196837
Affiliation (based on the past Project Information) *help	2013: 群馬県立産業技術センター, 研究調整官 2011 – 2013: 群馬県立産業技術センター, その他部局等, 研究員 2012: 群馬県立群馬産業技術センター, 主任研究員 2010 – 2011: 群馬県立産業技術センター, 研究員 1990 – 1991: 信州大学, 繊維学部, 助手
Review Section/Research Field	Principal Investigator Environmental technology/Environmental materials Except Principal Investigator 高分子合成 / Production engineering/Processing studies
Keywords	Principal Investigator 2,3,3,3-テトラフルオロプロペン / 強制循環式計測技術 / 安定性迅速計測 / 2,3,3,3-テトラフルオロプロピレン / 低GWP冷媒 / 環境保全 / 冷媒新規計測法 / 、低環境負荷冷媒 / 環境負荷低減技術 Except Principal Investigator Moire Fringes … More / Compoend eye / Imaging by Particle / Micro-Lens / Monodisperse Particle / latex particle / Polymer latex / モアレ縞 / 複眼レンズ / 粒子の結像 / ミクロレンズ / 単分散粒子 / ラテックス粒子 / 高分子ラテックス / モニタリング / 可視化 / ガス収集 / ガス焼け不良 / 分解ガス / 射出成形 Less

Research on the visualization of injection process in complex shaped molding and the suppression technology of polymer degradation
- Principal Investigator
  
  FUKUSHIMA YOSHIO
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Gunma Prefectural Industrial Technology Center
Research on the rapid measurement of stability of a refrigerant having low global warming potentialPrincipal Investigator
- Principal Investigator
  
  SUZUKI Takashi
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Environmental technology/Environmental materials
- Research Institution
  群馬県立群馬産業技術センター
   Gunma Prefectural Industrial Technology Center
Optical Supermicro-Lenses of Synthetic polymer Latex Particles
- Principal Investigator
  
  HAYASHI Sadao
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  高分子合成
- Research Institution
  Shinshu University

All 2014 2013 2012 2011 2010 Other

All Journal Article Presentation Patent

[Journal Article] 実成形時の燃焼ガス収集とガス組成分析によるPBT燃焼挙動に関する研究2014
- Author(s)
  福島祥夫, 黒岩広樹, 小松秀和, 鈴木崇他
- Journal Title
  
  成形加工
  
  Volume: Vol.26 No.1 Pages: 27-33
- NAID
  130006646943
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560146
[Journal Article] 成形加工2014
- Author(s)
  福島祥夫,黒岩広樹,小松秀和,鈴木崇,須田高史,村田泰彦
- Volume
  Vol.26,No.1
- Pages
  27-33
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560146
[Journal Article]2012
- Author(s)
  鈴木崇、小松俊二、〓相哲、勝田正文、山本亮一、田島創、小松秀和、町田忠男
- Journal Title
  
  Trans. Mater. Soc. Jpn.
  
  Volume: 37巻 Pages: 479-482
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510094
[Journal Article] Rapid Evaluation for Stability of Refrigerants Including 2,3,3,3-tetrafluoropropylene by Using Closed Circulation System2012
- Author(s)
  Takashi Suzuki
- Journal Title
  
  Transaction of Material Research Society of Japan
  
  Volume: 37 Pages: 479-482
- NAID
  130004676432
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22510094
[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013
- Inventor(s)
  鈴木崇、福島祥夫、黒岩広樹、小松秀和　他
- Industrial Property Rights Holder
  群馬県　他
- Industrial Property Rights Type
  特許
- Filing Date
  2013-08-27
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013
- Inventor(s)
  鈴木崇,恩田紘樹,福島祥夫,黒岩広樹,小松秀和,一倉史人
- Industrial Property Rights Holder
  群馬県,㈱一倉製作所
- Industrial Property Rights Type
  特許
- Filing Date
  2013-08-27
- Overseas
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 成形不良を監視する装置付き金型2012
- Inventor(s)
  福島祥夫,鈴木崇,黒岩広樹,小松秀和,一倉史人
- Industrial Property Rights Holder
  群馬県,㈱一倉製作所
- Industrial Property Rights Type
  特許
- Filing Date
  2012-05-24
- Overseas
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 成形不良を監視する装置付き金型2012
- Inventor(s)
  福島祥夫　鈴木崇　黒岩広樹　小松秀和　他
- Industrial Property Rights Holder
  群馬県　他
- Industrial Property Rights Type
  特許
- Filing Date
  2012-05-24
- Data Source
  KAKENHI-PROJECT-23560146
[Patent] 多機能型触媒評価装置2011
- Inventor(s)
  鈴木崇、町田忠男
- Industrial Property Rights Holder
  群馬県、株式会社ジー・ピー・イー
- Industrial Property Number
  2011-196342
- Filing Date
  2011-09-08
- Data Source
  KAKENHI-PROJECT-22510094
[Patent] 多機能型触媒評価装置2011
- Inventor(s)
  鈴木崇
- Industrial Property Rights Holder
  群馬県
- Industrial Property Number
  2011-196342
- Filing Date
  2011-09-08
- Data Source
  KAKENHI-PROJECT-22510094
[Patent] 多機能型触媒評価装置2010
- Inventor(s)
  鈴木崇
- Industrial Property Rights Holder
  群馬県
- Industrial Property Number
  2010-201825
- Filing Date
  2010-09-10
- Data Source
  KAKENHI-PROJECT-22510094
[Patent] 多機能型触媒評価装置2010
- Inventor(s)
  鈴木崇、町田忠男
- Industrial Property Rights Holder
  群馬県、株式会社ジー・ピー・イー
- Industrial Property Number
  2010-020825
- Filing Date
  2010-09-09
- Data Source
  KAKENHI-PROJECT-22510094
[Presentation]2014
- Author(s)
  鈴木崇,福島祥夫,黒岩広樹,恩田絋樹,小松秀和
- Organizer
  群馬県分析研究会
- Place of Presentation
  前橋
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 不活性ガス雰囲気下での金属界面におけるPBTのガス焼け現象2014
- Author(s)
  鈴木崇、福島祥夫、黒岩広樹、恩田絋樹、小松秀和　他
- Organizer
  第38回群馬県分析研究会2014
- Place of Presentation
  群馬県立群馬産業技術センター
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 成形加工2013
- Author(s)
  恩田絋樹,黒岩広樹,福島祥夫,鈴木崇,小松秀和
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation]2013
- Author(s)
  T.Suda, H.Kuroiwa, Y.Fukushima, T.Suzuki, F.Takeuti
- Organizer
  The 7th International Conference on Leading Edge Manufacturing in 21st Century LEM21 in Matsushima
- Place of Presentation
  松島
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] Detection of the Burn Mark on the Plastic Surface Using Image Analysis －Fundamental study for reduction the environmental impact by unpainted plastic products－2013
- Author(s)
  Takashi SUDA, Yoshio FUKUSHIMA, Hiroki KUROIWA,Takashi SUZUKI et al.
- Organizer
  The 7th International Conference on Leading Edge Manufacturing in 21st Century LEM21 in Matsushima 2013
- Place of Presentation
  松島大観荘
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 不活性ガス充填によるポリブチレンテレフタレート成形時の生成挙動2013
- Author(s)
  恩田紘樹、黒岩広樹、福島祥夫、鈴木崇、小松秀和他
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  タワーホール船堀
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 成形加工2012
- Author(s)
  鈴木崇,福島祥夫,黒岩広樹,茂木幸伸,小松秀和,瀧上昭治
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 高分散型金属試料を用いる低GWP冷媒の安定性試験2012
- Author(s)
  鈴木　崇
- Organizer
  2012年度日本冷凍空調学会年次大会
- Place of Presentation
  北海道工業大学（札幌市）
- Data Source
  KAKENHI-PROJECT-22510094
[Presentation]2012
- Author(s)
  鈴木崇,小松俊二,〓相哲、勝田正文
- Organizer
  2012 年度日本冷凍空調学会年次大会
- Place of Presentation
  札幌
- Data Source
  KAKENHI-PROJECT-22510094
[Presentation]2012
- Author(s)
  福島祥夫,鈴木崇,黒岩広樹,小松秀和
- Organizer
  成形加工シンポジア
- Place of Presentation
  名古屋
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] Rapid evaluation for stability of refrigerants involving HFO-1234yf by using closed circulation system2011
- Author(s)
  Takashi Suzuki
- Organizer
  第21回日本MRS学術シンポジウム
- Place of Presentation
  横浜情報文化センター
- Year and Date
  2011-12-21
- Data Source
  KAKENHI-PROJECT-22510094
[Presentation] 強制循環反応装置を用いた低GWP冷媒を含む冷媒の迅速計測技術2011
- Author(s)
  鈴木崇
- Organizer
  冷凍空調学会年次大会
- Place of Presentation
  東京大学
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-22510094
[Presentation] ガスセンサによる実成形時の発生ガス検知に関する基礎的検討
- Author(s)
  福島祥夫鈴木崇　黒岩広樹　小松秀和
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  ウインクあいち
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation] 実成形時のガス収集法とガス分析に基づく成形過程でのPBTガス焼けに関する考察
- Author(s)
  鈴木崇　福島祥夫　黒岩広樹　小松秀和　他
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  タワーホール船堀
- Data Source
  KAKENHI-PROJECT-23560146
[Presentation]
- Author(s)
  鈴木崇,小松俊二,〓相哲、勝田正文
- Organizer
  2011 年度日本冷凍空調学会年次大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22510094
[Presentation]
- Author(s)
  鈴木崇、小松俊二、〓相哲、勝田正文、山本亮一、田島創、小松秀和、町田忠男
- Organizer
  第21回MRS国際学術シンポジウム
- Place of Presentation
  横浜
- Data Source
  KAKENHI-PROJECT-22510094

1. KATSUTA Masafumi (20120107)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
2. TAJIMA So (30469887)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
3. YAMAMOTO Ryoichi (40469888)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
4. FUKUSHIMA YOSHIO (70310232)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results
5. KUROIWA Hiroki (10553480)

# of Collaborated Projects: 1 results

# of Collaborated Products: 12 results
6. KOMATSU Hidekazu (20469886)

# of Collaborated Projects: 1 results

# of Collaborated Products: 10 results
7. MOTEGI Yukinobu (20552558)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
8. TAKIGAMI Syouji (70143203)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
9. HAYASHI Sadao (80021137)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SUZUKI Takashi 鈴木 崇

Research Projects

Research Products

Co-Researchers

Research on the visualization of injection process in complex shaped molding and the suppression technology of polymer degradation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on the rapid measurement of stability of a refrigerant having low global warming potentialPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optical Supermicro-Lenses of Synthetic polymer Latex Particles

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 実成形時の燃焼ガス収集とガス組成分析によるPBT燃焼挙動に関する研究2014

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 成形加工2014

Author(s)

Volume

Pages

Data Source

[Journal Article]2012

Author(s)

Journal Title

Data Source

[Journal Article] Rapid Evaluation for Stability of Refrigerants Including 2,3,3,3-tetrafluoropropylene by Using Closed Circulation System2012

Author(s)

Journal Title

NAID

Data Source

[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 有機高分子材料の射出成形時におけるガス焼けおよびアウトガス抑制方法2013

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 成形不良を監視する装置付き金型2012

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 成形不良を監視する装置付き金型2012

Inventor(s)

Industrial Property Rights Holder

Industrial Property Rights Type

Filing Date

Data Source

[Patent] 多機能型触媒評価装置2011

Inventor(s)

Industrial Property Rights Holder

Industrial Property Number

Filing Date

Data Source

[Patent] 多機能型触媒評価装置2011

Inventor(s)

Industrial Property Rights Holder

Industrial Property Number

Filing Date

Data Source

[Patent] 多機能型触媒評価装置2010

Inventor(s)

Industrial Property Rights Holder

SUZUKI Takashi 鈴木崇