TERAMOTO Koji 寺本孝司

… Alternative Names

Researcher Number	40252605
Other IDs
External Links
Affiliation *help	2016 : 室蘭工業大学, 工学研究科, 教授 2014 – 2015 : 室蘭工業大学, 工学(系)研究科(研究院), 教授 2011 – 2013 : Muroran Institute of Technology, 工学(系)研究科(研究院), 准教授 2007 : 室蘭工業大学, 工学研究科, 教授 2005 : Osaka University, Dept.of Mech.Eng., Lecturer, 大学院・工学研究科, 講師 2002 – 2005 : 阪大, 工学(系)研究科(研究院), 助手 1999 – 2004 : 大阪大学, 大学院・工学研究科, 助手
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 Except Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / Educational technology / Intelligent mechanics/Mechanical systems
Keywords	Principal Investigator エンドミル加工 / 把持状態可視化 / 工作物把持 / 作業者支援 / 可視化 / パラメータ同定 / ラインレーザセンサ / モデル化 / 直接観察 / 切削加工 … More Except Principal Investigator モデリング / シミュレーション / modeling / 生産システム / 生産知識 / 溝加工 / Ultraprecision machining / CAM system / マイクロポンプ / 倒壊家屋 / 6軸制御 / virtual manufacturing / manufacturing system / 止り溝加工 / 動態保存 / シュミレーション / 拡張個別要素法 / Micromachining / 異分野連携 / マイクロロボット / 大学院教育 / CAMシステム / 家屋倒壊 / 曲面 / 高度職業専門人育成 / レスキュー / life-cycle / 管内自走 / ライフサイクル / マイクロ加工 / 放電加工 / virtual manufacturing system / Non-rotational cutting tool / 6-axis Control / Complex functional devices / manufacturing knowledge / Micropump / 地域課題 / ルーブリック / 複合機能素子 / 曲がり穴 / アウトカム / active knowledge archive / simulation / 仮想生産システム / 異分野大学院連携 / 高度専門職業人 / がれき / 災害救助 / 仮想生産 / 超精密加工 / 非回転工具 Less

異分野連携による高度専門職業人のルーブリックを用いたアウトカムアセスメント開発Ongoing
- Principal Investigator
  
  塚本容子
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Educational technology
- Research Institution
  Health Sciences University of Hokkaido
Research on accuracy assured machining by combining on-machine shape measurement and model-based error analysis.Principal Investigator
- Principal Investigator
  
  TERAMOTO Koji
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Muroran Institute of Technology
Modelling of machining error in elastomer end-milling based on in-process observation of end-milling processesPrincipal Investigator
- Principal Investigator
  
  TERAMOTO Koji
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Muroran Institute of Technology
自律型マイクロロボットによる小径複雑曲がり穴加工に関する基礎研究
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
低剛性・複雑形状部品の高精度切削加工のための工作物把持に関する研究Principal Investigator
- Principal Investigator
  
  寺本孝司
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
6-Axis Control Ultraprecision Micromachining of Complex Functional Devices
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
機械操作作業における技能拡張のための作業支援環境の設計論Principal Investigator
- Principal Investigator
  
  寺本孝司
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Osaka University
A Study on Active Knowledge Archive for Manufacturing Knowledge based on Virtual Manufacturing
- Principal Investigator
  
  ONOSATO Masahiko
- Project Period (FY)
  2002 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  HOKKAIDO UNIVERSITY
  Osaka University
災害人命救助を目的とした建造物倒壊がれきの工学研究
- Principal Investigator
  
  ONOSATO Masahiko
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  Osaka University
A Study on A Modeling Method for Life-Cycle Support of Manufacturing Ststems
- Principal Investigator
  
  ONOSATO Masahiko
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Osaka University

All 2016 2015 2014 2013 2012 2011 2005 2004 Other

All Journal Article Presentation

[Journal Article] A framework of accuracy assured machining for smart manufacturing2016
- Author(s)
  Koji TERAMOTO, Dongjin WU, Kentaro OTA and Ryota HAYASHI
- Journal Title
  
  Memoirs of the Muroran Institute of Technology
  
  Volume : 65
- Open Access / Acknowledgement Compliant / Peer Reviewed
- Data Source
  KAKENHI-PROJECT-26420038
[Journal Article] Experimental investigation of machining error in elastomer endmilling2013
- Author(s)
  Koji TERAMOTO and Kazuhisa YABUKI
- Journal Title
  
  Memoirs of the Muroran Institute of Technology
  
  Volume : Vol.62 Pages : 55-58
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560111
[Journal Article] On-site Visualization of Workpiece State for Enhancing the Recognition Ability of Machining Operators2005
- Author(s)
  Teramoto, K., Tanaka, R., Ishida, T., Takeuchi, Y.
- Journal Title
  
  Proceedings of International Conference on Changeable, Agile, Reconfigurable and Virtual Production
  
  Pages : 207-214
- Data Source
  KAKENHI-PROJECT-16760092
[Journal Article] Thermal state visualization of machining workpiece by means of "sensor-configured heat conductive simulation"2005
- Author(s)
  Teramoto, K., Tanaka, R., Ishida, T., Takeuchi, Y.
- Journal Title
  
  Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages : 921-926
- Data Source
  KAKENHI-PROJECT-16760092
[Journal Article] Configuration of Task Support Environment for the Enhancement of Machining Skills2004
- Author(s)
  Teramoto, K., Onosato, M
- Journal Title
  
  CIRP Journal of Manufacturing Systems 33-4
  
  Pages : 355-361
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350071
[Journal Article] Development of Active Knowledge Archives based on Virtual Manufacturing Systems2004
- Author(s)
  Onosato, M., Asao, Y., Ye, H, Teramoto, K.
- Journal Title
  
  CIRP Journal of Manufacturing Systems 33-2
  
  Pages : 151-159
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350071
[Journal Article] Configuration of Task Support Environment for the Enhancement of Machining Skills2004
- Author(s)
  Teramoto, K., Onosato
- Journal Title
  
  CIRP Journal of Manufacturing Systems 33-4
  
  Pages : 355-361
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350071
[Journal Article] Development of Active Knowledge Archives based on Virtual Manufacturing Systems2004
- Author(s)
  Onosato, M., Asao, Y., Ye, H., Teramoto, K.
- Journal Title
  
  CIRP Journal of Manufacturing Systems 33-2
  
  Pages : 151-159
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14350071
[Journal Article] On-machine Estimation of Workpiece Deformation by Combining locally Measured Strain and Elastic Simulation2004
- Author(s)
  Teramoto, K., et al.
- Journal Title
  
  Proc.of 8th International Conference on Mechatoronics Technology
  
  Pages : 437-442
- Data Source
  KAKENHI-PROJECT-16760092
[Presentation] A Proposal of Selection Method for Temperature Measurement in End-Milling2016
- Author(s)
  Dngjin WU and Koji TERAMOTO,
- Organizer
  16th International Conference on Precision Engineering (ICPE2016)
- Place of Presentation
  静岡県浜松市，アクトシティ浜松
- Year and Date
  2016-11-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] 有限要素法を用いた柔軟弾性体の切削における切りくず分離過程シミュレーション2016
- Author(s)
  平松文宏, 寺本孝司
- Organizer
  2016年度精密工学会北海道支部学術講演会
- Place of Presentation
  北海道旭川市，大雪クリスタルホール
- Year and Date
  2016-08-27
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] 柔軟弾性体エンドミル加工における加工誤差の統計的モデリング2016
- Author(s)
  WU ZEJIAN，荒木拓磨，寺本孝司
- Organizer
  2016年度精密工学会北海道支部学術講演会
- Place of Presentation
  北海道旭川市，大雪クリスタルホール
- Year and Date
  2016-08-27
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] 精度保証加工のための加工誤差要因の推定に関する研究（工作物把持による加工誤差への影響評価）2016
- Author(s)
  古川大樹，寺本孝司
- Organizer
  日本機械学会第11回　生産加工・工作機械部門講演会
- Place of Presentation
  愛知県名古屋市，名古屋大学
- Year and Date
  2016-10-22
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] Study of rapid on-machine shape measurement for accuracy assured machining2015
- Author(s)
  Kentaro OTA, Koji TERAMOTO, and Ryota HAYASHI
- Organizer
  The 8th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Kyoto Research Park
- Year and Date
  2015-10-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] Study on accuracy improvement of the 2D laser displacement sensor for on-machine shape measurement2015
- Author(s)
  Kentaro OTA and Koji TERAMOTO, Ryota HAYASHI
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2015 (MIER2015)
- Place of Presentation
  Muroran Institute of Technology
- Year and Date
  2015-05-29
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] Accuracy assured machining by combining intelligent monitoring and on-machine shape measurement2015
- Author(s)
  Koji TERAMOTO, Dongjin WU and Kentaro OTA
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2015 (MIER2015)
- Place of Presentation
  Muroran Institute of Technology
- Year and Date
  2015-05-29
- Int'l Joint Research / Invited
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] デジタル化された機械ステーションのための工作物把持のモデル化2015
- Author(s)
  寺本孝司，久冨秀平，林健太
- Organizer
  日本機械学会生産システム部門講演会2014
- Place of Presentation
  慶応大学（神奈川県横浜市）
- Year and Date
  2015-03-30
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] Analysis of cutting force in elastomer endmilling2014
- Author(s)
  Koji Teramoto, Takahiro Kunishima and Yutaro Furuya
- Organizer
  15th International Conference on Precision Engineering
- Place of Presentation
  ホテル日航金沢（石川県，金沢市）
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] Analysis of cutting force in elastomer endmilling2014
- Author(s)
  Koji Teramoto, Takahiro Kunishima and Yutaro Furuya
- Organizer
  15th International Conference on Precision Engineering (ICPE2014)
- Place of Presentation
  石川県ホテル日航金沢(will be presented)
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] 柔軟弾性体のエンドミル加工における工作物挙動のモデル化2013
- Author(s)
  古谷優太郎，寺本孝司，工藤翔平
- Organizer
  2013年度精密工学会秋季大会
- Place of Presentation
  関西大学（大阪府，吹田市）
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] Modeling of Workpiece Dynamic Behavior in Elastomer End-milling2013
- Author(s)
  Yutaro Furuya and Koji Teramoto
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2013
- Place of Presentation
  チェンマイ大学（タイ王国，チェンマイ）
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] In-process Observation of Workpiece Deformation in Elastomer Endmilling2013
- Author(s)
  Koji TERAMOTO, Shohei KUDO and Yuichiro FURUYA
- Organizer
  The 7th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  宮城県ホテル松島大観荘(pp.259-262)
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] In-process Observation of Workpiece Deformation in Elastomer Endmilling2013
- Author(s)
  Koji TERAMOTO, Shohei KUDO and Yuichiro FURUYA
- Organizer
  7th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  ホテル大観荘（宮城県，松島町）
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] 柔軟弾性体のエンドミル加工における加工誤差2013
- Author(s)
  寺本孝司，矢吹和久，工藤翔平
- Organizer
  2013年度精密工学会春季大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] 柔軟弾性体のエンドミル加工プロセスの複合モデリング2012
- Author(s)
  寺本孝司
- Organizer
  2012年度精密工学会春季大会
- Place of Presentation
  首都大学東京
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] 柔軟弾性体のエンドミル加工プロセスの複合モデリング2012
- Author(s)
  寺本孝司
- Organizer
  2012年度精密工学会春季大会講演論文集
- Place of Presentation
  首都大学東京(CD-ROM)(B78)
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] Experimental investigation of machining error in elastomer endmilling2012
- Author(s)
  Kazuhisa YABUKI and Koji TERAMOTO
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2012
- Place of Presentation
  登別市
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] 柔軟弾性体の切削加工における切りくず分離過程の分析2011
- Author(s)
  矢吹和久，寺本孝司
- Organizer
  ２０１１年度精密工学会北海道支部学術講演会
- Place of Presentation
  はこだて未来大学
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] 高速度カメラを用いた柔軟弾性体エンドミル加工における工作物挙動の直接観察
- Author(s)
  古谷優太郎，寺本孝司，工藤翔平，礒村誠
- Organizer
  2013年度精密工学会北海道支部学術講演会
- Place of Presentation
  北見工業大学（北海道，北見市）
- Data Source
  KAKENHI-PROJECT-23560111
[Presentation] Machining simulation for smart manufacturing
- Author(s)
  Koji TERAMOTO
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2015
- Place of Presentation
  室蘭工業大学（北海道室蘭市）
- Year and Date
  2015-05-29 – 2015-05-30
- Invited
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] Accuracy assured machining by combining intelligent monitoring and on-machine shape measurement
- Author(s)
  Koji TERAMOTO, Dongjin WU and Kentaro OTA
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2015
- Place of Presentation
  室蘭工業大学（北海道室蘭市）
- Year and Date
  2015-05-29 – 2015-05-30
- Invited
- Data Source
  KAKENHI-PROJECT-26420038
[Presentation] Study on accuracy improvement of the 2D laser displacement sensor for on-machine shape measurement
- Author(s)
  Kentaro OTA and Koji TERAMOTO, Ryota HAYASHI
- Organizer
  Joint Symposium on Mechanical - Industrial Engineering, and Robotics 2015
- Place of Presentation
  室蘭工業大学（北海道室蘭市）
- Year and Date
  2015-05-29 – 2015-05-30
- Data Source
  KAKENHI-PROJECT-26420038

1. ONOSATO Masahiko (80177279)

# of Collaborated Projects : 3results

# of Collaborated Products : 4results
2. TAKEUCHI Yoshimi (50107546)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
3. ISHIDA Tohru (20313421)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
4. IWATA Kazuaki (30031066)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
5. TANAKA Fumiki (30207138)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
6. 近藤司 (40292049)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
7. 金子俊一 (50134789)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
8. 塚本容子 (20405674)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
9. 伊藤一 (10241415)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
10. 小松川浩 (10305956)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
11. 相馬仁 (70226702)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
12. 河合知彦

# of Collaborated Projects : 1results

# of Collaborated Products : 0results

TERAMOTO Koji 寺本 孝司

寺本 孝一 テラモト コウイチ

Research Projects

Research Products

Co-Researchers

異分野連携による高度専門職業人のルーブリックを用いたアウトカムアセスメント開発Ongoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on accuracy assured machining by combining on-machine shape measurement and model-based error analysis.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Modelling of machining error in elastomer end-milling based on in-process observation of end-milling processesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

自律型マイクロロボットによる小径複雑曲がり穴加工に関する基礎研究

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

低剛性・複雑形状部品の高精度切削加工のための工作物把持に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

6-Axis Control Ultraprecision Micromachining of Complex Functional Devices

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

機械操作作業における技能拡張のための作業支援環境の設計論Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Active Knowledge Archive for Manufacturing Knowledge based on Virtual Manufacturing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

災害人命救助を目的とした建造物倒壊がれきの工学研究

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on A Modeling Method for Life-Cycle Support of Manufacturing Ststems

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] A framework of accuracy assured machining for smart manufacturing2016

Author(s)

Journal Title

Data Source

[Journal Article] Experimental investigation of machining error in elastomer endmilling2013

Author(s)

Journal Title

Data Source

[Journal Article] On-site Visualization of Workpiece State for Enhancing the Recognition Ability of Machining Operators2005

Author(s)

Journal Title

Data Source

[Journal Article] Thermal state visualization of machining workpiece by means of "sensor-configured heat conductive simulation"2005

Author(s)

Journal Title

TERAMOTO Koji 寺本孝司

寺本孝一テラモトコウイチ