Sugiura Ryuji 杉浦隆次

… Alternative Names

SUGIURA Ryuji 杉浦隆次

Less

Researcher Number	40431522
Other IDs
Affiliation (Current)	2026: 日本大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2017 – 2019: 日本大学, 工学部, 准教授 2012: 東北大学, 大学院・工学研究科, 准教授 2011 – 2012: 東北大学, 工学(系)研究科(研究院), 准教授
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials
Keywords	Principal Investigator 損傷評価 / 機械材料・材料力学 / 解析・評価 / 余寿命推定 / 高温力学特性 / 微視損傷形成モデル / TypeⅣ破壊 / 結晶粒回転 / 微視損傷モデル / 高Cr鋼 … More / 結晶方位差 / 微視損傷 / 寿命評価 / 中国 / 韓国 / アメリカ / イギリス / 国際情報交流 / 高温先進耐熱材料 / EBSD / 構造力学 Less

Local Damage Modeling Using Electron Back Scatter DiffeactionPrincipal Investigator
- Principal Investigator
  
  Sugiura Ryuji
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nihon University
Development of the control technique for damage formation of advanced heat resistant material based on the EBSD analysisPrincipal Investigator
- Principal Investigator
  
  SUGIURA Ryuji
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University

All 2013 2012 2011

All Journal Article Presentation

[Journal Article] 高Cr鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価2013
- Author(s)
  杉浦隆次、横堀壽光、佐藤和人、田淵正明、小林謙一、弥富政享、KamranNIKBIN
- Journal Title
  
  材料
  
  Volume: 62巻2号 Pages: 68-74
- NAID
  130003367138
- URL
  http://dx.doi.org/10.2472/jsms.62.68
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] 高Cr鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価2013
- Author(s)
  杉浦隆次、横堀壽光、佐藤和人、田淵正明、小林謙一、弥富政享、Kamran NIKBIN
- Journal Title
  
  材料
  
  Volume: 62-2 Pages: 68-74
- NAID
  130003367138
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] クリープ条件下における局所微視ひずみ解析に基づいた耐熱材料の結晶方位変化シミュレーション2012
- Author(s)
  大見敏仁、小林大輔、松崎隆、南雲佳子、杉浦隆次、横堀壽光
- Journal Title
  
  日本材料強度学会誌
  
  Volume: 46巻1号 Pages: 1-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] 線形-非線形曲線融合近似に基づいたNi基超合金のクリープき裂発生寿命予測2012
- Author(s)
  南雲佳子、横堀壽光、杉浦隆次、松崎隆
- Journal Title
  
  日本材料強度学会誌
  
  Volume: 46巻2号 Pages: 19-26
- NAID
  40019499249
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] 高Crフェライト系耐熱鋼のクリープ・疲労条件下におけるき裂成長特性と損傷評価2012
- Author(s)
  松崎隆、杉浦隆次、南雲佳子、横堀壽光
- Journal Title
  
  日本金属学会誌
  
  Volume: 76巻、11号 Pages: 624-633
- NAID
  10031129950
- URL
  http://dx.doi.org/10.2320/jinstmet.76.624
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Geometrical Influence for Creep Damage Evaluation of IN738LC using the EBSD method2012
- Author(s)
  D.Kobayashi, M,Miyabe, Y.Kagiya, Y.Nabumo, R.Sugiura, T.Matsuzaki and A.T.Yokobori, Jr
- Journal Title
  
  Materials at High Temperatures
  
  Volume: Vol.29, No.4 Pages: 301-307
- URL
  http://dx.doi.org/10.3184/096034012X13482300982195
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Creep crack initiation and growth behavior for Ni-base superalloys2012
- Author(s)
  Yoshiko Nagumo, A.Toshimitsu Yokobori,Jr., Ryuji Sugiura, Go Ozeki and Takashi Matsuzaki
- Journal Title
  
  Special Issue on Advanced Technology in Experimental Mechanics, Journal of Solid Mechanics and Materials Engineering
  
  Volume: 6-6 Pages: 610-621
- NAID
  130002072518
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Creep crack initiation and growth behavior for Ni-base superalloys, Special Issue on Advanced Technology in Experimental Mechanics2012
- Author(s)
  Yoshiko Nagumo, A.Toshimitsu Yokobori,Jr., Ryuji Sugiura, Go Ozeki and Takashi Matsuzaki
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: Vol.6, No.6 Pages: 610-621
- URL
  http://dx.doi.org/10.1299/jmmp.6.610
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Geometrical Influence for Creep Damage Evaluation of IN738LC using the EBSD method2012
- Author(s)
  D.Kobayashi, M,Miyabe, Y.Kagiya, Y.Nabumo, R.Sugiura, T.Matsuzaki and A.T.Yokobori, Jr.
- Journal Title
  
  Materials at High Temperatures
  
  Volume: 29-4 Issue: 4 Pages: 301-307
- DOI
  10.3184/096034012x13482300982195
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Definition and estimation method of incubation time of creep crack growth for high Cr steels and their weldments (creep crack initiation)2012
- Author(s)
  A.Toshimitsu Yokobori, Jr., Ryuji Sugiura, Masaaki Tabuchi, Masataka Yatomi, Kenichi Kobayashi and Kamaran Nikbin
- Journal Title
  
  Strength, Fracture and Complexity, An International Journal
  
  Volume: 7-3 Issue: 3 Pages: 315-320
- DOI
  10.3233/sfc-2012-0146
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] 高Crフェライト系耐熱鋼のクリープ・疲労条件下におけるき裂成長特性と損傷評価2012
- Author(s)
  南雲佳子、横堀壽光、杉浦隆次、松崎隆
- Journal Title
  
  日本材料強度学会誌
  
  Volume: 46-2 Pages: 19-26
- NAID
  10031129950
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Scale effect of material structure on the similarity of subcritical crack growth under sustained loading2012
- Author(s)
  Ryuji Sugiura, A.Tosshimitsu Yokobori,Jr., Toshihito Ohmi, Yoshiko Nagumo, Takashi Matsuzaki, Victoria A.Yardley
- Journal Title
  
  Strength, Fracture and Complexity, An International Journal
  
  Volume: 7-4 Issue: 4 Pages: 321-332
- DOI
  10.3233/sfc-2012-0147
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] The application of the analysis of potential driven particle diffusion to the strength of materilas, Strength2011
- Author(s)
  A.Toshimitsu Yokobori Jr., Toshihito Ohmi, Tsutomu Murakawa, Takenao Nemoto, Tomoharu Uesugi and Ryuji Sugiura
- Journal Title
  
  Fracture and Complexity, An International Journal
  
  Volume: Vol.7, No.2 Issue: 2 Pages: 215-233
- DOI
  10.3233/sfc-2011-0140
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Creep damage evaluation of IN738LC based on the EBSD method by using a notched specimen, Strength, Fracture and Complexity2011
- Author(s)
  Daisuke Kobayashi, Masamichi Miyabi, Yukio Kagiya, Yoshiko Nagumo, Ryuji Sugiura, Takashi Matsuzaki and A.Tohimitsu Yokobori Jr
- Journal Title
  
  An International Journal
  
  Volume: Vol.7, No.2 Issue: 2 Pages: 157-167
- DOI
  10.3233/sfc-2011-0134
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] The Occurrence Mechanism of Periodicity of Creep Crack Path for P922011
- Author(s)
  南雲佳子, 横堀壽光, 杉浦隆次, 松崎隆
- Journal Title
  
  Journal of ASTM international
  
  Volume: 8巻 Issue: 8 Pages: 1-11
- DOI
  10.1520/jai103818
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-10J02227, KAKENHI-PROJECT-23760084
[Journal Article] Micro mechanics based on vacancy diffusion coupled with damage mechanics related to creepdeformation and prediction of creep fracture life2011
- Author(s)
  A.Toshimitsu Yokobori, Jr., Kunihiko Abe, Hironori Tsukidate, Toshihito Ohmi, Ryuji Sugiura, Haruki Ishikawa
- Journal Title
  
  Materials at High Temperatures
  
  Volume: Vol.28, No.2 Pages: 126-136
- URL
  http://dx.doi.org/10.3184/096034011X13061599631976
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Creep crack initiation and growth characteristics in weldment for P92 based on C*, dδ/dt, K and Q* parameters2011
- Author(s)
  Ryuji Sugiura, A. Toshimitsu Yokobori, Jr., Kazuto Sato, Masaaki Tabuchi, Masataka Yatomi, Kenichi Kobayashiand Kamran Nikbin
- Journal Title
  
  Strength, Fracture and Complexity, An International Journal
  
  Volume: Vol.6 Issue: 4 Pages: 177-189
- DOI
  10.3233/sfc-2011-0116
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Characterizations of Creep-fatigue Crack Initiation and Growth Life for P92 using Circular Notched Round Bar Specimen2011
- Author(s)
  R. Sugiura, A. T. Yokobori, Jr., T. Nakagawa, T. Adachi, I. Nonaka, M. Tabuchi, Y. Hasegawa and T. Matsuzaki
- Journal Title
  
  Journal of ASTM International
  
  Volume: 9-1 Pages: 1-15
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Evaluation of Creep crack growth properies of Gr.92 steel weldment2011
- Author(s)
  M.Tabuchi, A.T.Yokobori Jr., R.Sugiura, M.Yatomi and K.Kobayashi
- Journal Title
  
  Strength, Fracture and Complexity, AnInternational Journal
  
  Volume: Vol.7, No.2 Issue: 2 Pages: 137-146
- DOI
  10.3233/sfc-2011-0132
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Creep crack initiation and growth characteristics in weldment for P92 based on C*, dδ/dt and Q* parameters2011
- Author(s)
  Ryuji Sugiura, A. Toshimitsu Yokobori, Jr., Kazuto Sato, Masaaki Tabuchi, Masataka Yatomi, Kenichi Kobayashi and Kamran Nikbin
- Journal Title
  
  Strength, Fracture and Complexity, An International Journal
  
  Volume: 6 Pages: 177-189
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] Characterizations of Creep-fatigue Crack Initiation and Growth Life forP92 using Circular Notched Round Bar Specimen2011
- Author(s)
  R. Sugiura, A. T. Yokobori, Jr., T.Nakagawa, T. Adachi, I. Nonaka, M. Tabuchi, Y. Hasegawa and T. Matsuzaki
- Journal Title
  
  Journal of ASTM International
  
  Volume: Vol.9,No.1 Issue: 1 Pages: 1-5
- DOI
  10.1520/jai103956
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Journal Article] EBSD法によるIN738LC切欠き材のクリープ損傷評価2011
- Author(s)
  小林大輔、宮部正道、鍵谷幸生、南雲佳子、杉浦隆次、松崎隆、横堀壽光
- Journal Title
  
  日本材料強度学会誌
  
  Volume: 45巻1号 Pages: 1-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] 高温構造脆性概念に基づく溶接継手部の健全性評価2013
- Author(s)
  杉浦隆次
- Organizer
  材料学会
- Place of Presentation
  京都
- Year and Date
  2013-01-25
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] 高温構造脆性概念に基づく溶接継手部の健全性評価2013
- Author(s)
  杉浦隆次
- Organizer
  第６１期第4回　日本材料学会高温強度部門委員会
- Place of Presentation
  材料学会（京都）
- Invited
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] P91およびP92鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価2012
- Author(s)
  杉浦隆次
- Organizer
  日本材料学会
- Place of Presentation
  岡山大学
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] P91およびP92鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価2012
- Author(s)
  杉浦隆次
- Organizer
  材料学会
- Place of Presentation
  岡山
- Year and Date
  2012-05-26
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] P92溶接継手材の初期クリープき裂成長特性における局所応力多軸効果と空孔拡散凝集挙動2012
- Author(s)
  杉浦隆次
- Organizer
  日本金属学会2012年秋期講演大会（第151回）
- Place of Presentation
  愛媛大学
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] P92溶接継手材の初期クリープき裂成長特性における局所応力多軸効果と空孔拡散凝集挙動2012
- Author(s)
  杉浦隆次
- Organizer
  金属学会
- Place of Presentation
  愛媛
- Year and Date
  2012-09-19
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] The Estimation of The Life of Crack Initiation for P92 and P91 Steels Including Welded Joint2012
- Author(s)
  Ryuji Sugiura
- Organizer
  "Life Prediction for P91, P92 Steel" Workshop organized by Energy Safety Research Institute of Chung Ang University(招待講演)
- Place of Presentation
  Seoul Korea
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] Workshop organized by Energy Safety Research, The Estimation of The Life of Crack Initiation for P92 and P91 Steels Including Welded Joint2012
- Author(s)
  杉浦隆次
- Organizer
  Life Predicion for P91, P92 Steel
- Place of Presentation
  ソウル(韓国)
- Year and Date
  2012-02-21
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] Cr-Mo-V鋼のクリープき裂成長挙動における多軸応力効果と材料組織変化の影響2011
- Author(s)
  杉浦隆次
- Organizer
  日本金属学会秋季（第149回）大会
- Place of Presentation
  沖縄コンベンションセンター
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] Definition and estimation method of crack initiation and growth lives under creep-fatigue strain controlled conditions for P922011
- Author(s)
  R.Sugiura
- Organizer
  EPRI Expert Workshop on Creep-Fatigue Damage Interaction
- Place of Presentation
  Pusan Korea
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] ひずみ制御高温クリープ・疲労重畳条件下におけるP92鋼のき裂発生・成長挙動2011
- Author(s)
  杉浦隆次
- Organizer
  機械学会
- Place of Presentation
  東京
- Year and Date
  2011-09-12
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] Definition and estimation method of crack initiation and growth lives under creep-fatigue strain controlled conditions for P922011
- Author(s)
  杉浦隆次
- Organizer
  EPRI Expert Workshop on Creep-Fatigue Damage Interacion
- Place of Presentation
  釜山(韓国)
- Year and Date
  2011-10-18
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] Cr-Mo-V鋼のクリープき裂成長挙動における多軸応力効果と材料組織変化の影響2011
- Author(s)
  杉浦隆次
- Organizer
  金属学会
- Place of Presentation
  沖縄
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-23760084
[Presentation] ひずみ制御高温クリープ・疲労重畳条件下におけるP92鋼のき裂発生・成長挙動2011
- Author(s)
  杉浦隆次
- Organizer
  日本機械学会2011年度年次大会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-23760084

1. 南雲佳子

# of Collaborated Projects: 0 results

# of Collaborated Products: 3 results

Sugiura Ryuji 杉浦 隆次

SUGIURA Ryuji 杉浦 隆次

Research Projects

Research Products

Co-Researchers

Local Damage Modeling Using Electron Back Scatter DiffeactionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the control technique for damage formation of advanced heat resistant material based on the EBSD analysisPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 高Cr鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価2013

Author(s)

Journal Title

NAID

URL

Data Source

[Journal Article] 高Cr鋼溶接継手材の初期クリープき裂成長速度特性とき裂発生寿命評価2013

Author(s)

Journal Title

NAID

Data Source

[Journal Article] クリープ条件下における局所微視ひずみ解析に基づいた耐熱材料の結晶方位変化シミュレーション2012

Author(s)

Journal Title

Data Source

[Journal Article] 線形-非線形曲線融合近似に基づいたNi基超合金のクリープき裂発生寿命予測2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 高Crフェライト系耐熱鋼のクリープ・疲労条件下におけるき裂成長特性と損傷評価2012

Author(s)

Journal Title

NAID

URL

Data Source

[Journal Article] Geometrical Influence for Creep Damage Evaluation of IN738LC using the EBSD method2012

Author(s)

Journal Title

URL

Data Source

[Journal Article] Creep crack initiation and growth behavior for Ni-base superalloys2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Creep crack initiation and growth behavior for Ni-base superalloys, Special Issue on Advanced Technology in Experimental Mechanics2012

Author(s)

Journal Title

URL

Data Source

[Journal Article] Geometrical Influence for Creep Damage Evaluation of IN738LC using the EBSD method2012

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Definition and estimation method of incubation time of creep crack growth for high Cr steels and their weldments (creep crack initiation)2012

Author(s)

Journal Title

DOI

Data Source

[Journal Article] 高Crフェライト系耐熱鋼のクリープ・疲労条件下におけるき裂成長特性と損傷評価2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Scale effect of material structure on the similarity of subcritical crack growth under sustained loading2012

Author(s)

Journal Title

DOI

Data Source

[Journal Article] The application of the analysis of potential driven particle diffusion to the strength of materilas, Strength2011

Author(s)

Sugiura Ryuji 杉浦隆次

SUGIURA Ryuji 杉浦隆次

[Journal Article] Creep crack initiation and growth characteristics in weldment for P92 based on C, dδ/dt, K and Q parameters2011

[Journal Article] Creep crack initiation and growth characteristics in weldment for P92 based on C, dδ/dt and Q parameters2011