Yoshida Fusahito 吉田総仁

… Alternative Names

YOSHIDA Fusahito 吉田総仁

吉田聡仁ヨシダフサヒト

Less

Researcher Number	50016797
Other IDs
External Links
Affiliation (Current)	2025: 広島大学, 先進理工系科学研究科(工), 名誉教授
Affiliation (based on the past Project Information) *help	2018: 広島大学, 工学研究科, 名誉教授 2017: 広島大学, 工学研究科, 特任教授 2017: 広島大学, 大学院工学研究科, 特任教授 2016: 広島大学, 工学研究院, 特任教授 2011 – 2015: 広島大学, 工学(系)研究科(研究院), 教授 … More 2012: 広島大学, 工学研究院, 教授 2010 – 2011: Hiroshima University, 大学院・工学研究院, 教授 2008 – 2009: Hiroshima University, 大学院・工学研究科, 教授 2001 – 2005: Hiroshima University, Graduate School of Engineering, Professor, 大学院・工学研究科, 教授 1994 – 2000: 広島大学, 工学部, 教授 1987 – 1993: 広島大学, 工学部, 助教授 1990: Hiroshima University, Division 1, Assoc, Prof., 工芸部, 助教授 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Production engineering/Processing studies / 材料力学 / Materials/Mechanics of materials Except Principal Investigator 金属加工(含鋳造) / Production engineering/Processing studies / Materials/Mechanics of materials / 材料力学 / 機械材料工学
Keywords	Principal Investigator 構成式 / 成形限界 / 板材成形 / CAE / 成形加工 / SUS304 / 多軸応力 / 積層板 / 弾塑性解析 / Delamination … More / ラチェット / 繰返し塑性 / 実験 / 最適設計 / スプリングバック / ＣＡＥ / 剥離 / プレス成形 / 異方性発展モデル / 超高張力鋼板 / Constitutive equation / Multiaxal stress / Elevated temperature / Creep-ratchetting / 4Cr-1Mo steel / 2 1 / Cr-Mo鋼 / クリープ / 応力制御 / FEM / 非弾性構成式 / 高温 / クリープ・ラチェッティング / SUS304鋼 / )4)Crー1Mo鋼 / 2(1( / Aluminum alloy sheet / Magnesium alloy sheet / Steel sheet / Yield surface / Constitutive model / Plasticity / Sheet metal forming / アルミニウム / アルミニウム合金板 / マグネシウム合金板 / 鋼板 / 降伏曲面 / 塑性変形 / dislocation / nonhomogeneous plastic deformation / constitutive equation / cyclic plasticity / multi-axial stress / yield-point phenomena / 転位 / 不均一塑性変形 / 降状点現象 / press-formability / optimum design / elasto-plasticity / strength / rigidity / lightweight / sheet metal laminate / perforated sheet / プレス成形性 / 弾塑性 / 強度 / 剛性 / 軽量化 / 多孔質板 / identification of material parameters / constitutive model / inverse problem / elasto-plastic analysis / composite sheet / 最適化法 / 板曲げ / 弾塑性逆解析 / 材料パラメータ同定 / 構成モデル / 逆問題 / Elasto-plastic analysis / Forming limit / Plastic forming / Metal layr of less ductility / Sheet metal laminats / クロムクラッドアルミニウム板 / クロムクラッド鋼板 / ステンレスクラッドアルミニウム板 / 成形性 / 弱接合界面 / 難加工材 / 塑性加工 / 難加工層 / 金属積層板 / Sheet-Thickness Change / Unbending / Stretch Bending / Localized Necking / Forming Limit / Press-Formability / Stainless-Steel Clad Aluminium Sheet Metals / 成形限界線図 / くびれ発生条件 / 曲げもどし / 引張り曲げ / 張出し試験 / 引張り試験 / アルミニウム系クラッド板 / 鋼 / 引張り曲げ・曲げもどし / はく離 / 板厚変化 / 引張り曲げ・曲げ戻し / 局部くびれ / アルミニウムクラッド板 / ステンレス / FEM Analysis / Cyclic Plasticity / Experiment / Cyclic Bending / Cyclic Axial Load / Internal Pressure / Mechanical Ratcheting / Stainless-Clad Pipe / シェイクダウン / 非弾性 / FEM解析 / 繰返し曲げ / 繰返し軸力 / 内圧 / メカニカルラチェット / ステンレスクラッド鋼管 / メタモデル / 最適プロセス / プレス金型 / 応力－ひずみ関係 / 板成形 / 異方性 / 大ひずみ / 弾塑性特性 / 冷・熱間加工 / 熱間加工 / 弾塑性構成モデル / 高機能難加工板材 / 実験解析 / FEMシミュレーション / 大変形 / 粘弾塑性 / 樹脂サンドイッチ鋼板 … More Except Principal Investigator 残留応力 / レーザ照射 / 局所加熱逐次張出し / 形状精度 / 微視組織と機械的特性 / 成形性 / チタン板 / マグネシウム合金板 / インクリメンタルフォーミング / レーザ局所加熱逐次張出し / Ni-Cr Powder Sintered / Strain Rate / Grain Boundary Ductile Fracture / Intermediate Temperature Brittleness / Nickel-Chromium Alloys / セレーション / 圧延加工性 / 粒界割れ / 粒界延性破壊 / ニッケル粉-クロム粉焼結材 / ひずみ速度 / 粒界低性破壊 / 中間温度ぜい性 / ニッケル-クロム合金 / Elasto-plastic analysis / ion energy / Stress relaxation / Residual stress / Ion-bombardment / Silicon substrate / Sputter-deposited films / 弾塑性解析 / 半導体 / スパッタ薄 / 弾塑性力学解析 / 照射エネルギー / 応力緩和 / イオン照射 / シリコン基板 / スパッタ薄膜 / Free Dislocations / Ductile-Brittle Transition / Decrease in Yield Stress / Shock Pressure / Sintered Powder Chromium / 延性ーぜい性遷移温度 / 降状応力低下 / 焼結クムロ / 延性・ぜい性遷移温度 / 自由転位 / 延性-ぜい性遷移温度 / 降伏応力低下 / 衝撃圧処理 / 焼結クロム / Unified Constitutive Relation / Finite Element Analysis / Life Prediction / Inelastic Constitutive Relation / Fatigue-creep Interaction / Plasticity-creep Interaction / 高温非弾性変形 / 塑性-クリ-プ相互作用 / 統一型構成式 / 有限要素解析 / 寿命評価 / 非弾性構成式 / 疲労ークリ-プ相互作用 / 塑性ークリ-プ相互作用 / ひずみ誘起マルテンサイト / 有限要素法 / ステンレス鋼 / 変形抵抗 / 塑性加工 Less

Material parameter identification and forming-limit criterion on ultra-high-strength steel sheets for sheet-metal forming simulation CAEPrincipal Investigator
- Principal Investigator
  
  Yoshida Fusahito
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Development of incremental forming technology with local heating by laser irradiation as a quality-products processing technology for difficult-to-form sheet metals
- Principal Investigator
  
  Hino Ryutaro
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Optimum press-die design for springback compensation by material-mechanical meta-model buildingPrincipal Investigator
- Principal Investigator
  
  Yoshida Fusahito
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Determination of stress-strain relationship and anisotropy for accurate CAE of sheet metal formingPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Accurate material models and prediction of forming limits on high performance difficult-to-form sheet metals for cold and hot forming CAEPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2008 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
Constitutive models of plasticity for anisotropic sheet metals for cold/warm forming and their forming simulation applicationsPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
Elastic-plastic deformation of lightweight core-perforated sheet metal laminates and their optimum design considering strength, rigidity and formabilityPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
A model of multiaxial cyclic plasticity describing yield-point phenomena and nonhomogeneous plastic deformation and its applicationsPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
Reduction of Residual Stress in Sputter-Deposited Films by Ion-Bombardment
- Principal Investigator
  
  NOWAK Roman
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Identification of material parameters in constitutive models for metal and metal/polymer composite sheets by elasto-plastic inverse analyzesPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
Formability of Sheet Metal Laminates Consisting of Layrs of Less Formbility or Weak Laminate BoundariesPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
樹脂サンドイッチ鋼板のプレス形成時の粘弾塑性大変形挙動とはく離条件Principal Investigator
- Principal Investigator
  
  吉田総仁
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Deformation Characteristics and Press-Formability of Steel/Aluminium Clad Sheet MetalsPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  HIROSHIMA UNIVERSITY
Effect of Shock Pressure on the Ductile -Brittle Transition Behavior of Sintered Chromium
- Principal Investigator
  
  OHMORI Masanobu
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  HIROSHIMA UNIVERSITY
Mechanical ratcheting of stainless-clad pipe subjected to internal pressure and cyclic axial load or cyclic bending.Principal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  Hiroshima University
A Study on the Application of Inelastic Constitutive Relations under Plasticity-Creep Interaction and the Evaluation of Life Prediction Methods
- Principal Investigator
  
  INOUE Tatsuo
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  材料力学
- Research Institution
  Kyoto University
有限要素法シミュレーションによる鍛造製品の材質予測と制御
- Principal Investigator
  
  白石光信
- Project Period (FY)
  1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械材料工学
- Research Institution
  Hiroshima University
Mechanism of Less Ductility in Nickel-Base Super Alloys at Intermediate Temperatures
- Principal Investigator
  
  OHMORI Masanobu
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  HIROSHIMA UNIVERSITY
Creep-ratchetting of Heat Resisting Steels at Elevated Temperature in Multiaxial Stress StatePrincipal Investigator
- Principal Investigator
  
  YOSHIDA Fusahito
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  HIROSHIMA UNIVERSITY

[Book] 60 Excellent Invensions in Metal Forming (E. Tekkaya edt.)2015
- Author(s)
  F. Yoshida and T. Uemori
- Total Pages
  6
- Publisher
  Springer
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Elasto-viscoplastic behavior of 980 MPa nano-precipitation strengthened steel sheet at elevated temperatures and springback in warm bending2018
- Author(s)
  N. Saito, M. Fukahori, T. Minote, Y. Funakawa, D. Hisano, H. Hamasaki, F. Yoshida
- Journal Title
  
  International Journal of Mechanical Sciences
  
  Volume: 146-147 Pages: 571-582
- DOI
  10.1016/j.ijmecsci.2017.11.044
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06011
[Journal Article] Effect of anisotropic evolution on circular and oval hole expansion behavior of high-strength steel sheets2018
- Author(s)
  T. Suzuki, K. Okamura, G. Capilla, H. Hamasaki, F. Yoshida
- Journal Title
  
  International Journal of Mechanical Sciences
  
  Volume: 146-147 Pages: 556-570
- DOI
  10.1016/j.ijmecsci.2017.10.038
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06011
[Journal Article] Determination of the anisotropic hardening of sheet metals at large strain from stretch bending test2017
- Author(s)
  G. Capilla, H. Hamasaki, F. Yoshida, T. Suzuki, K. Okamura
- Journal Title
  
  Key Engineering Materials
  
  Volume: 725 Pages: 677-682
- DOI
  10.4028/www.scientific.net/kem.725.677
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06011
[Journal Article] Elimination of springback of high-strength steel sheet by usingadditional bending with counter punch2016
- Author(s)
  L. Komgrit, H. Hamasaki, R. Hino, F. Yoshida
- Journal Title
  
  Jornal of Material Processing Technology
  
  Volume: 229 Pages: 199-206
- DOI
  10.1016/j.jmatprotec.2015.08.029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Modeling of anisotropic hardening of sheet metals including description of the Bauschinger effect2015
- Author(s)
  F. Yoshida, H. Hamasaki, T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 75 Pages: 170-188
- DOI
  10.1016/j.ijplas.2015.02.004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Implicit stress integration and consistent tangent matrix for Yoshida's 6th order polynomial yield function with Yoshida-Uemori kinematic hardening rule2015
- Author(s)
  Hiroshi Hamasaki, Fusahito Yoshida, Takeshi Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 651-653 Pages: 558-563
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Implicit Stress Integration and Consistent Tangent Matrix for Yoshida’s 6th Order Polynomial Yield Function Combined with Yoshida-Uemori Kinematic Hardening Rule2015
- Author(s)
  H. Hamasaki, F. Yoshida, T. Uemori
- Journal Title
  
  Key Engineering Materials
  
  Volume: 651-653 Pages: 558-563
- DOI
  10.4028/www.scientific.net/kem.651-653.558
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] A novel technology to eliminate U-bending springback of high2014
- Author(s)
  Komgrit Lawanwomga, Hiroshi Hamasaki,Ryutaro Hino, Fusahito Yoshida
- Journal Title
  
  Procedia Engineering
  
  Volume: 81 Pages: 957-962
- DOI
  10.1016/j.proeng.2014.10.124
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] A model of anisotropy evolution of sheet metals2014
- Author(s)
  Fusahito Yoshida, Hiroshi Hamasaki, Takeshi Uemori
- Journal Title
  
  Procedia Engineering
  
  Volume: 81 Pages: 1216-1221
- DOI
  10.1016/j.proeng.2014.10.100
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Elasto-Plastic Property of High Strength Steel at Warm Temperature and Its Springback2013
- Author(s)
  N. Saito, M. Fukahori, Y. Ichikawa, H. Hamasaki, F. Yoshida
- Journal Title
  
  Key Engineering Materials
  
  Volume: 535-536 Pages: 385-388
- DOI
  10.4028/www.scientific.net/kem.535-536.385
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-24360056
[Journal Article] Experimental and Calculated Cyclic Elasto-Plastic Deformations of Copper-Based Spring Materials2013
- Author(s)
  Y. Hattori, K. Furukawa, F. Yoshida
- Journal Title
  
  IEICE Trans. Electron.
  
  Volume: E96.C Issue: 9 Pages: 1157-1164
- DOI
  10.1587/transele.E96.C.1157
- NAID
  130003370470
- ISSN
  0916-8524, 1745-1353
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-24360056
[Journal Article] A user-friendly 3D yield function to describe anisotropy of steel sheets2013
- Author(s)
  F. Yoshida, H. Hamasaki, T. Uemori
- Journal Title
  
  International Journal of Plasticity
  
  Volume: Vol.45 Pages: 119-139
- DOI
  10.1016/j.ijplas.2013.01.010
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108, KAKENHI-PROJECT-24360056
[Journal Article] Elasto-plasticity Behavior of IF Steel Sheet with Planar Anisotropy and Its Macro-meso Modeling2012
- Author(s)
  K. Kitayama, F. Yoshida, ほか2名
- Journal Title
  
  ISIJ International
  
  Volume: 52 Pages: 735-742
- NAID
  10030975136
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Role of counterpunch for square-cup drawing of tailored blank composed of thick/thin sheets2012
- Author(s)
  Y. Morishita, F. Yoshida, ほか3名
- Journal Title
  
  Journal of Materials Processing
  
  Volume: 212 Issue: 10 Pages: 2102-2108
- DOI
  10.1016/j.jmatprotec.2012.05.011
- NAID
  10027128728
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] Elasto-plasticity Behavior of IF Steel Sheet with Planar Anisotropy and Its Macro-meso Modeling2012
- Author(s)
  K. Kitayama, F. Yoshidaほか２名
- Journal Title
  
  ISIJ International
  
  Volume: 52 Pages: 735-742
- NAID
  10030975136
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656108
[Journal Article] 高張力鋼板のU曲げスプリングバックの抑制に及ぼす決め押しの効果2012
- Author(s)
  小川孝行, 吉田総仁
- Journal Title
  
  塑性と加工
  
  Volume: 53 Pages: 69-73
- NAID
  10030028208
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360056
[Journal Article] 面内異方性を持つIF鋼板の弾塑性特性とそのマクロ-メゾモデリング2011
- Author(s)
  北山功志郎, 小林匠, 上森武, 吉田総仁
- Journal Title
  
  鉄と鋼
  
  Volume: 97 Pages: 221-229
- NAID
  130000673746
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 高張力鋼板のひずみ経路変化を含む張出し成形限界2011
- Author(s)
  平原篤, 藤井裕, 日野隆太郎, 吉田総仁
- Journal Title
  
  塑性と加工
  
  Volume: 52 Pages: 821-827
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Experimental observation of elasto-plasticity behavior of type 5000 and 60000 aluminum alloy sheets2011
- Author(s)
  S. Tamura, S. Sumikawa, T. Uemori, H. Hamasaki, F. Yoshida
- Journal Title
  
  Materials Transaction
  
  Volume: 52 Pages: 868-875
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Description of planar anisotropyand cyclic plasticity behavior of aluminumsheet based on crystal plasticity2011
- Author(s)
  T. Kobayashi, K. Kitayama, T. Uemori, F. Yoshida
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 117-119 Pages: 1397-1401
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 5000系および6000系アルミニウム合金板における弾塑性挙動の実験観察2011
- Author(s)
  田村翔平, 澄川智史, 上森武, 濱崎洋, 吉田総仁
- Journal Title
  
  軽金属
  
  Volume: 61 Pages: 255-261
- NAID
  130004482054
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Description of planar anisotropy and cyclic plasticity behavior of aluminum sheet based on crystal plasticity2011
- Author(s)
  T.Kobayashi, K.Kitayama, T.Uemori, F.Yoshida
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 117-119 Pages: 1397-1401
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T.Uemori, S.Sumikawa, S.Tamura, H.Hamasaki, T.Naka, R.Hino, F.Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 10^<th> ICTP Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 複動ポンチを用いたドローベンド成形における高張力鋼板の形状凍結性2011
- Author(s)
  森下勇樹, 安部重毅, 坂元康泰, 吉田総仁
- Journal Title
  
  塑性と加工
  
  Volume: 52 Pages: 806-810
- NAID
  10029130236
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 面内異方性を持つIF鋼板の弾塑性特性とそのマクローメゾモデリッグ2011
- Author(s)
  北山功志郎, 小林匠, 上森武, 吉田総仁
- Journal Title
  
  鉄と鋼
  
  Volume: 97 Pages: 221-229
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Constitutive Equations of Bauschinger Effect under Stress Path Change2011
- Author(s)
  T. Uemori, S. Sumikawa, S. Tamura, H. Hamasaki, T. Naka, R. Hino, F. Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 10 Pages: 819-823
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Prediction of fracture for high strength steelsheets under stretch bending2010
- Author(s)
  Tetsuo Naka, Takanori Kurose, TakeshiUemori, Ryutaro Hino and Fusahito Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 81-9 Pages: 841-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Reduction of springback by bottoming and ironing on high strength steel sheet.2010
- Author(s)
  T.Ogawa, A.Hirahara, F.Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 81 Pages: 845-848
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Prediction of fracture for high strength steel sheets under stretch bending2010
- Author(s)
  Tetsuo Naka, Takanori Kurose, Takeshi Uemori, Ryutaro Hino, Fusahito Yoshida
- Journal Title
  
  Steel Research International 81-9
  
  Pages: 841-844
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Incremental forming with local heating for aluminum-magnesium alloy sheet2010
- Author(s)
  Ryutaro Hino, Naoaki Nagaishi, Yuki Yamamoto, Tetsuo Naka, Fusahito Yoshida
- Journal Title
  
  Steel Research International 81-9
  
  Pages: 946-949
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Elasto-Plasticity Behavior of High Strength Steel Sheet in Biaxial Stress Path Change2010
- Author(s)
  Takeshi Uemori, Tohru Kuramitsu, Yuji Mito, Ryutaro Hino, Tetsuo Naka, Fusahito Yoshida
- Journal Title
  
  Materials Transactions 51-10
  
  Pages: 1814-1818
- NAID
  10026695336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Elasto-Plasticity Behavior of High Strength Steel Sheet in Biaxial Stress Path Change2010
- Author(s)
  Takeshi Uemori, Tohru Kuramitsu, Yuji Mito, Ryutaro Hino, Tetsuo Naka and Fusahito Yoshida
- Journal Title
  
  Materials Transactions
  
  Volume: 51-10 Pages: 1814-1818
- NAID
  10026695336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Incremental forming with local heating for aluminum-magnesium alloy sheet2010
- Author(s)
  Ryutaro Hino, Naoaki Nagaishi, Yuki Yamamoto, Tetsuo Naka and Fusahito Yoshida
- Journal Title
  
  Steel Research International
  
  Volume: 81-9 Pages: 946-949
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] 二軸応力経路が変化する場合の高張力鋼板の弾塑性変形挙動2009
- Author(s)
  上森武, 倉光徹, 三登悠司, 日野隆太郎, 中哲夫, 吉田総仁
- Journal Title
  
  塑性と加工 50
  
  Pages: 39-43
- NAID
  10029738418
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Air bending and springback of stainless steel clad aluminum sheet2009
- Author(s)
  K.Yilamu, R.Hino, H.Hamasaki, F.Yoshida
- Journal Title
  
  Journal of Materials Processing Technology 210
  
  Pages: 272-278
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Yield-Point Phenomena of Ti-20V-4Al-1Sn at 1073K and Its Constitutive Modelling2009
- Author(s)
  X.T. Wang, H. Hamasaki, M. Yamamura, R. Yamauchi, T. Maeda, Y. Shirai, F. Yoshida
- Journal Title
  
  Materials Transactions 50-6
  
  Pages: 1576-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Yield-Point Phenomena of Ti-20V-4Al-1Sn at1073 K and Its Constitutive Modelling2009
- Author(s)
  X. T. Wang, H. Hamasaki, M. Yamamura, R. Yamauchi, T. Maeda, Y. Shirai and F. Yoshida
- Journal Title
  
  Materials Transactions
  
  Volume: 50-6 Pages: 1576-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Yield-Point Phenomena of Ti-20V-4Al-1Sn at 1073 K and Its Constitutive Modelling2009
- Author(s)
  X.T.Wang, H.Hamasaki, M.Yamamura, R.Yamauchi, T.Maeda, Y.Shirai, F.Yoshida
- Journal Title
  
  Materials Transactions 50
  
  Pages: 1576-1578
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] A Study of High Temperature Viscoplastic Deformation of Beta Titanium Alloy Considering Yield-Point Phenomena2009
- Author(s)
  X.T.Wang, H.Hamasaki, M.Yamamura, R.Yamauchi, T.Maeda, Y.Shirai, F.Yoshida
- Journal Title
  
  Key Engineering Materials 410/411
  
  Pages: 177-185
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Numerical Optimization of Sheet Metal Forming Process Using New Fracture Criterion2008
- Author(s)
  Hirahara, A, Hino, R, Yoshida, F
- Journal Title
  
  International Journal of Modem Physics B 2 2
  
  Pages: 5692-5698
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Incremental Sheet Forming with Local Heating for Lightweight Hard-to-form Material2008
- Author(s)
  R. Hino, F. Yoshida, N. Nagaishi, T. Naka
- Journal Title
  
  International Journal of Modern Physics B 22-32
  
  Pages: 6082-6087
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Incremental Sheet Forming with Local Heating for Lightweight Hard-to-Form Material2008
- Author(s)
  Hino, R, Yoshida, F, Nagaishi, N
- Journal Title
  
  International Journal of Modem Physics B 2 2
  
  Pages: 6082-6087
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Incremental Sheet Forming with Local Heating for Lightweight Hard-to-form Material2008
- Author(s)
  R. Hino, F. Yoshida, N. Nagaishi and T. Naka
- Journal Title
  
  International Journal of Modern Physics B
  
  Volume: 22-31/ 32 Pages: 6082-6087
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20360070
[Journal Article] Effect of stress concentration on upper yield point in mild steel2006
- Author(s)
  T.Yoshida
- Journal Title
  
  Int. J. Mechanical Sciences 47・1
  
  Pages: 96-100
- NAID
  10017151284
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] 調質圧延における不均一塑性変形のFEMシミュレーション2005
- Author(s)
  吉田総仁
- Journal Title
  
  材料とプロセス(CAMP-ISIJ)
  
  Pages: 18-19
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] アルミニウム合金板の引張曲げ破断限界2005
- Author(s)
  吉田正敏
- Journal Title
  
  塑性と加工 46・536
  
  Pages: 49-53
- NAID
  10016122117
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] 材料の塑性挙動のモデリングと加工/構造解析への応用2005
- Author(s)
  吉田総仁
- Journal Title
  
  塑性と加工 46・539
  
  Pages: 12-17
- NAID
  10016728000
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] Fracture limits of sheet metals under stretch bending2005
- Author(s)
  M.Yoshida
- Journal Title
  
  Int. J. Mechanical Sciences 47
  
  Pages: 1885-1896
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] 調質圧延における不均一塑性変形のFEMシミュレーション2005
- Author(s)
  吉田総仁
- Journal Title
  
  CAMP-ISIJ 18
  
  Pages: 1219-1219
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] 変形履歴を受けた高張力鋼板の異方性2005
- Author(s)
  倉光徹, 市丸隆志, 上森武, 中哲夫, 吉田総仁
- Journal Title
  
  日本機械学会中国四国支部第43期総会・講演会講演論文集 No.055-1
  
  Pages: 41-42
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] Effect of Strain-Rate and Temperature on Yield Locus for 5083 Aluminum Alloy Sheet2004
- Author(s)
  T.Naka, Y.Nakayama, T.Uemori, R.Hino, F.Yoshida
- Journal Title
  
  Key Engineering Materials 274-276
  
  Pages: 937-942
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] A Model of Cyclic Viscoplasticity with Special Reference to Yield-point Phenomena2004
- Author(s)
  F.Yoshida
- Journal Title
  
  21st International Congress of Theoretical and Applied Mechanics (ICTAM04) Proceedings (CD-ROM)
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] AZ31板の降伏挙動におよぼす温度とひずみ速度の影響2004
- Author(s)
  中哲夫, 廣中智久, 高津正秀, 東健司, 上森武, 吉田総仁
- Journal Title
  
  第35回塑性加工春季講演会講演論文集
  
  Pages: 123-124
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] メゾ・マクロ塑性構成モデルとその塑性加工数値シミュレーションへの応用2004
- Author(s)
  吉田総仁
- Journal Title
  
  日本鉄鋼協会シンポジウム「鉄鋼材料の製造段階から製品に至るまでのナノ・ミクロ・メゾ・マクロスケール組織に基づいた材質予測技術の現状と課題」テキスト
  
  Pages: 49-59
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] A model of cyclic viscoplasticity with special reference to yield-point phenomena2004
- Author(s)
  F.Yoshida
- Journal Title
  
  21st International Congress of Theoretical and Applied Mechanics (ICTAM04)CD-ROM Proceedings
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] Strength of highly ductile acrylic adhesive in butt joint under combined tension and torsion2004
- Author(s)
  T.Yoshida
- Journal Title
  
  Key Engineering Materials 274-276
  
  Pages: 993-998
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] Determination of plasticity properties of metal surfaces by micro-indentation2004
- Author(s)
  F.Yoshida, H.Hamasaki
- Journal Title
  
  2nd International Conference on Trihology in Manufacturing Processes(ICTMP2004)
  
  Pages: 347-354
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] Strength of Highly Ductile Acrylic Adhesive in Butt-Joint under Combined Tension and Torsion2004
- Author(s)
  T.Yoshida
- Journal Title
  
  Key Engineering Materials 274-276
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] A model of cyclic viscoplasticity with special reference to yield-point phenomena2004
- Author(s)
  F.Yoshida
- Journal Title
  
  21st International Congress of Theoretical and Applied Mechanics(ICTAM04) CD-ROM Proceedings (CD-ROM)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] A model of large-strain cyclic plasticity and its application to springback simulation2003
- Author(s)
  F.Yoshida
- Journal Title
  
  Int. J. Mechanical Sciences 45
  
  Pages: 1687-1702
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Journal Article] A model of large-strain cyclicc plasticity and its application to springback simulation,2003
- Author(s)
  T.Yoshida
- Journal Title
  
  Int. J. Mechanical Sciences 45
  
  Pages: 1687-1702
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360057
[Presentation] レーザ局所加熱インクリメンタル成形後のマグネシウム合金板の組織と機械特性2018
- Author(s)
  松本純宜, 日野隆太郎, 吉田総仁
- Organizer
  平成30年度塑性加工春季講演会
- Data Source
  KAKENHI-PROJECT-15K05728
[Presentation] Description of non-linear unloading curve and closure of cyclic stress-strain loop based on Y-U model2018
- Author(s)
  Fusahito Yoshida
- Organizer
  NUMISHEET 2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06011
[Presentation] Descriptions of several cyclic plasticity behaviors: non-linear unloading, closure of stress-strain hysteresis loop, tension-compression asymmetry and strain-rate effect, by extended version of Yoshida-Uemori mode2018
- Author(s)
  Fusahito Yoshida
- Organizer
  AEPA 2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06011
[Presentation] Formability of Titanium Sheet in Incremental Forming with Local Heating by Laser Irradiation2017
- Author(s)
  Ahmad Eka Siwi, Ryutaro Hino, Kohei Murao and Fusahito Yoshida
- Organizer
  第68回塑性加工連合講演会
- Data Source
  KAKENHI-PROJECT-15K05728
[Presentation] 板材成形シミュレーションのための材料モデルと成形限界クライテリオン2017
- Author(s)
  吉田総仁
- Organizer
  日本鉄鋼協会白石記念講座
- Invited
- Data Source
  KAKENHI-PROJECT-16K06011
[Presentation] Anisotropic hardening behavior of HSS sheets at large strain determinred from stretch-bending test2016
- Author(s)
  G. Capilla, H. Hamasaki, F. Yoshida, T. Suzuki, K. Okamura
- Organizer
  第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-16K06011
[Presentation] Constitutive modeling for various cyclic plasticity behaviors of anisotropic sheets2016
- Author(s)
  F. Yoshida
- Organizer
  Plasticity 2016
- Place of Presentation
  Hawaii, USA
- Year and Date
  2016-01-05
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] Cyclic Plasticity model with anisotropy evolution2016
- Author(s)
  Fusahito Yoshida
- Organizer
  NUMIFORM 2016
- Place of Presentation
  Univ. of Tech. of Troy, France
- Year and Date
  2016-07-04
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06011
[Presentation] レーザ局所加熱インクリメンタルフォーミングによるチタン板の成形2016
- Author(s)
  村尾康平，栗澤拓也，日野隆太郎，吉田総仁
- Organizer
  日本機械学会中国四国支部第54期総会・講演会
- Place of Presentation
  愛媛大学工学部（松山市）
- Year and Date
  2016-03-09
- Data Source
  KAKENHI-PROJECT-15K05728
[Presentation] Incremental Forming with Local Heating by Laser Irradiation for Titanium Sheet2016
- Author(s)
  Ahmad EKA Siwi, Kohei MURAO, Ryutaro HINO, Fusahito YOSHIDA
- Organizer
  第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学（埼玉県南埼玉郡）
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-15K05728
[Presentation] マグネシウム合金板のレーザ援用局所加熱インクリメンタルフォーミングにおける成形特性2016
- Author(s)
  栗澤拓也，川畑慶太，日野隆太郎，吉田総仁
- Organizer
  第67回塑性加工連合講演会
- Place of Presentation
  日本工業大学（埼玉県南埼玉郡）
- Year and Date
  2016-10-21
- Data Source
  KAKENHI-PROJECT-15K05728
[Presentation] Modeling of plasticity for anisotropic sheet metals and its applications to forming simulation2015
- Author(s)
  F. Yoshida
- Organizer
  21st International Conference on Mechanical Engineering
- Place of Presentation
  Veracruz, Mexico
- Year and Date
  2015-09-23
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] レーザ局所加熱インクリメンタルフォーミングにおける成形品の形状精度2015
- Author(s)
  栗澤拓也，村尾康平，日野隆太郎，吉田総仁
- Organizer
  日本機械学会第23回機械材料・材料加工技術講演会
- Place of Presentation
  広島大学（東広島市）
- Year and Date
  2015-11-13
- Data Source
  KAKENHI-PROJECT-15K05728
[Presentation] Modeling of Anisotropic Hardening of Sheet Metals2014
- Author(s)
  Fusahito Yoshida
- Organizer
  The 9th International Conference and Workshop (NUMISHEET2014)
- Place of Presentation
  Melbourne, Australia
- Invited
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] Modeling of Anisotropic Hardening of Sheet Metals2014
- Author(s)
  吉田総仁
- Organizer
  The 9th International Conference and Workshop (NUMISHEET2014)
- Place of Presentation
  Melbourne, Australia
- Invited
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] Description of anisotropy evolution of sheet metals2014
- Author(s)
  吉田　総仁
- Organizer
  12th Asia-Pacipic Conference on Engineering Plasticity and Its Applications
- Place of Presentation
  Kaohsiung, Taiwan
- Year and Date
  2014-09-02
- Invited
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] 異方性繰返し塑性構成モデルとその塑性加工シミュレーションへの応用2013
- Author(s)
  吉田総仁
- Organizer
  第62回理論応用力学講演会
- Place of Presentation
  東京工業大学（東京都）
- Invited
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] 異方性繰返し塑性構成モデルとその塑性加工シミュレーションへの応用2013
- Author(s)
  吉田総仁
- Organizer
  第62回理論応用力学講演会
- Place of Presentation
  東京工業大学(招待講演)
- Year and Date
  2013-03-07
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] Description of Anisotropy and Bauschinger Effect on Various Types of Steel Sheets2013
- Author(s)
  吉田総仁
- Organizer
  The 11th International Conference on Numerical Methods in Industrial Formng Processes(NUMIFORM2013)
- Place of Presentation
  Shenyang, China
- Invited
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] Description of Anisotropy and Bauschinger Effect on Various Types of Steel Sheets2013
- Author(s)
  Fusahito Yoshida
- Organizer
  The 11th International Conference on Numerical Methods in Industrial Formng Processes (NUMIFORM 2013)
- Place of Presentation
  Shenyang, China
- Invited
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] Description of Anisotropy and Bauschinger Effect on Various Types of Steel Sheets2013
- Author(s)
  吉田総仁
- Organizer
  The 11th International Conference on Numerical Methods in Industrial Formng Processes　（NUMIFORM2013)
- Place of Presentation
  Shenyang，China
- Invited
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] A 3D Yield Fiunction for Anisotropic Sheets2012
- Author(s)
  吉田総仁
- Organizer
  18^<th> International Symposium on Plasticity & Its Current Applications (Plasticity2012)
- Place of Presentation
  San Juan, Puerto Rico, USA(招待講演)
- Year and Date
  2012-01-08
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A 3D Yield Function for Anisotropic Sheets2012
- Author(s)
  Fusahito Yoshida
- Organizer
  18th International Symposium on Plasticity & Its Current Applications (Plasticity2012)
- Place of Presentation
  San Juan, Puerto Rico, USA
- Invited
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] A 3D Yield Fiunction for Anisotropic Sheets2012
- Author(s)
  Fusahito Yoshida
- Organizer
  18th International Symposium on Plasticity & Its Current Applications(Plasticity2012)
- Place of Presentation
  San Juan, Puerto Rico, USA,招待基調講演
- Year and Date
  2012-01-08
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A 3D Yield Fiunction for Anisotropic Sheets.2012
- Author(s)
  吉田総仁
- Organizer
  18th International Symposium on Plasticity & Its Current Applications (Plasticity2012)(招待講演)
- Place of Presentation
  San Juan, Puerto Rico，USA
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] 板材成形シミュレーションのための3次元異方性降伏関数2012
- Author(s)
  吉田総仁
- Organizer
  ６１回理論応用力学講演会(招待講演)
- Place of Presentation
  東京大学，東京
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] 板材成形シミュレーションのための3次元異方性降伏関数2012
- Author(s)
  吉田総仁
- Organizer
  61回理論応用力学講演会
- Place of Presentation
  東京大学,東京(招待講演)
- Year and Date
  2012-03-08
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 応力テンソルの線形変換と不変量による異方性降伏関数の表現2012
- Author(s)
  吉田総仁
- Organizer
  平成24年度塑性加工春季講演会
- Place of Presentation
  コマツウェイ総合研究センタ
- Year and Date
  2012-06-08
- Data Source
  KAKENHI-PROJECT-24360056
[Presentation] 応力テンソルの線形変換と不変量による異方性降伏関数の表現2012
- Author(s)
  吉田総仁
- Organizer
  平成24年度塑性加工春季講演会
- Place of Presentation
  コマツウェイ総合研究センタ（石川県）
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] Forming limit of high strength steel sheetsunder non-proportional deformation2011
- Author(s)
  R. Hino, H. Fujii, A. Hirahara, F. Yoshida
- Organizer
  8th Int. Conference on Technology of Plasticity(ICTP2011)
- Place of Presentation
  Aachen, Germany
- Year and Date
  2011-09-28
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 異方性板材の3次元降伏関数の提案とその妥当性の検証2011
- Author(s)
  吉田総仁
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋技術科学大学,豊橋
- Year and Date
  2011-10-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 異方性板材の3次元降伏関数の提案とその妥当性の検証2011
- Author(s)
  吉田総仁
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋技術科学大学，豊橋
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] A User-friendly 3D Yield Fiunction for Steel Sheets and Its Application2011
- Author(s)
  Fusahito Yoshida
- Organizer
  8th International Conference on Numerical Simulationof 3D Sheet Metal Forming Processes(NUMISHEET2011)
- Place of Presentation
  Seoul, Korea,招待基調講演
- Year and Date
  2011-08-23
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A User-friendly 3D Yield Fiunction for Steel Sheets and Its Application.2011
- Author(s)
  吉田総仁
- Organizer
  8th International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET2011)(招待講演)
- Place of Presentation
  Seoul, Korea
- Data Source
  KAKENHI-PROJECT-23656108
[Presentation] 鋼板のr値と流動応力の異方性を記述するための降伏関数の提案2011
- Author(s)
  吉田総仁
- Organizer
  日本塑性加工学会2011年春季講演会
- Place of Presentation
  早稲田大学,東京
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A User-friendly 3D Yield Fiunction for Steel Sheets and Its Application2011
- Author(s)
  吉田総仁
- Organizer
  8^<th> International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET2011)
- Place of Presentation
  Seoul, Korea(招待講演)
- Year and Date
  2011-08-23
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Material models for accurate simulation of sheet metal forming and springback.2010
- Author(s)
  F.Yoshida
- Organizer
  10th Int.Conf.on Numerical Methods in Industrial Forming
- Place of Presentation
  Postech, Korea(招待講演)
- Year and Date
  2010-06-16
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Material models for accurate simulation of sheet metal for ming and springback2010
- Author(s)
  Fusahito Yoshida
- Organizer
  10th International Conference on Numerical Methods in Industrial Forming Proceses(NUMIFORM 2010)
- Place of Presentation
  Postech, Korea招待基調講演
- Year and Date
  2010-06-16
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 弾塑性構成モデルとその塑性加工シミュレーションへの応用2010
- Author(s)
  吉田総仁
- Organizer
  日本鉄鋼協会第159回春季講演大会
- Place of Presentation
  筑波大学
- Year and Date
  2010-03-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Material models for accurate simulation of sheet metal forming and springback2010
- Author(s)
  Fusahito Yoshida
- Organizer
  10th International Conference on Numerical Methods in Industrial Forming Proceses (NUMIFORM 2010)
- Place of Presentation
  Postech, Korea招待基調講演
- Year and Date
  2010-06-16
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A model of large-strain plasticity and its numerical applications to springback prediction2009
- Author(s)
  Fusahito Yoshida
- Organizer
  Forming Technology Forum 2009 (FTF09)
- Place of Presentation
  Zurich, Switzerland招待基調講演
- Year and Date
  2009-05-05
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] ステンレス/アルミニウム積層板の引張曲げ・曲げ戻しにおけるスプリングバック解析に及ぼす材料モデルの影響2009
- Author(s)
  日野隆太郎, Yilamu Kelimu, 濱崎洋, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A model of large-strain plasticity and its numerical applications to springback prediction2009
- Author(s)
  吉田総仁
- Organizer
  Forming Technology Forum 2009
- Place of Presentation
  Zurich, Switzerland
- Year and Date
  2009-05-05
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A model of large-strain plasticity and its numerical applications to springback prediction2009
- Author(s)
  Fusahito Yoshida
- Organizer
  Forming Technology Forum 2009(FTF09)
- Place of Presentation
  Zurich, Switzerland招待基調講演
- Year and Date
  2009-05-05
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 応力経路変化における弾塑性変形挙動とそのモデル化2009
- Author(s)
  澄川智史, 中村周平, 上森武, 吉田総仁
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 高張力鋼板の形状凍結性に及ぼす引張り力の影響2009
- Author(s)
  今崎友彰, 原田康平, 中哲夫, 濱崎洋, 上森武, 日野隆太郎, 吉田総仁
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 種々の異方性降伏関数と吉田-上森モデルの組合せによるアルミニウム合金板のスプリングバック解析2009
- Author(s)
  澄川智史, 田村翔平, 濱崎洋, 上森武, 麻寧緒, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-29
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] マクロ・メゾ弾塑性構成モデルの研究の現状と展望2009
- Author(s)
  吉田総仁, 北山功志郎, 上森武
- Organizer
  日本鉄鋼協会第158回秋季講演大会
- Place of Presentation
  京都大学
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 5000系アルミニウム合金板の二軸引張りおよび繰返し弾塑性変形挙動2009
- Author(s)
  田村翔平, 澄川智史, 上森武, 中哲夫, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 非比例変形を受けたAZ31Mg合金板の成形限界予測2009
- Author(s)
  大出明慶, 植川陽介, 中哲夫, 上森武, 吉田総仁, 高津正秀, 東健司
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  信州大学
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] 繰り返し負荷試験と最適化手法による金属板材の材料パラメータ同定2009
- Author(s)
  濱崎洋, 上森武, 吉田総仁
- Organizer
  平成21年度(第40回)塑性加工春季講演会
- Place of Presentation
  京都大学
- Year and Date
  2009-05-30
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A Model of Large-strain Cyclic Plasticity and Its Numerical Simulation Applications to Springback Prediction and Compensation2008
- Author(s)
  Fusahito Yoshida
- Organizer
  7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(Numisheet 2008)
- Place of Presentation
  Interlarken, Switzerland招待基調講演
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A Model of Large-strain Cyclic Plasticity and Its Numerical Simulation Applications to Springback Prediction and Compensation2008
- Author(s)
  Fusahito Yoshida
- Organizer
  7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2008)
- Place of Presentation
  Interlarken, Switzerland招待基調講演
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] Springback compensation for HSS sheet forming by means of FE simulation and optimization2008
- Author(s)
  吉田総仁
- Organizer
  The 9th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2008)
- Place of Presentation
  Daejeon Convention Center, Korea
- Year and Date
  2008-10-21
- Data Source
  KAKENHI-PROJECT-20360070
[Presentation] A Model of Large-Strain Cyclic Plasticity and Its Numerical Simulation Applications to Springback Prediction and Compensation2008
- Author(s)
  吉田総仁
- Organizer
  7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2008)
- Place of Presentation
  Interlaken, Switzerland
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-20360070

1. OKADA Tatsuo (00233338)

# of Collaborated Projects: 9 results

# of Collaborated Products: 0 results
2. HINO Ryutaro (10283160)

# of Collaborated Projects: 7 results

# of Collaborated Products: 27 results
3. HAMASAKI Hiroshi (30437579)

# of Collaborated Projects: 4 results

# of Collaborated Products: 25 results
4. OHMORI Masanobu (90034321)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
5. UEMORI Takeshi (70335701)

# of Collaborated Projects: 3 results

# of Collaborated Products: 28 results
6. ITOH Misao (50144879)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
7. HATAYAMA Haruaki (50112181)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. INOUE Tatsuo (10025950)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. KAWAI Masamichi (90169673)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. OHNO Nobutada (30115539)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. IMATANI Shoji (70191898)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. FUKUDA Izumi (80099895)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. NOWAK Roman (90242916)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. YANAGISAWA Osamu (50034393)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. 白石光信 (30144885)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. 小坂田宏造 (50031109)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. 新津靖 (70143659)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. IGARI Toshihide

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. ISHIYAMA Seiji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. ISHIDA Kyosou

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. KAWABATA Keita

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
22. MURAO Kohei

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
23. KURISAWA Takuya

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
24. MATSUMOTO Junki

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
25. SATO Atsushi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. Ahmad Eka Siwi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Yoshida Fusahito 吉田 総仁

YOSHIDA Fusahito 吉田 総仁

吉田 聡仁 ヨシダ フサヒト

Research Projects

Research Products

Co-Researchers

Material parameter identification and forming-limit criterion on ultra-high-strength steel sheets for sheet-metal forming simulation CAEPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of incremental forming technology with local heating by laser irradiation as a quality-products processing technology for difficult-to-form sheet metals

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optimum press-die design for springback compensation by material-mechanical meta-model buildingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Determination of stress-strain relationship and anisotropy for accurate CAE of sheet metal formingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Accurate material models and prediction of forming limits on high performance difficult-to-form sheet metals for cold and hot forming CAEPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Constitutive models of plasticity for anisotropic sheet metals for cold/warm forming and their forming simulation applicationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Elastic-plastic deformation of lightweight core-perforated sheet metal laminates and their optimum design considering strength, rigidity and formabilityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A model of multiaxial cyclic plasticity describing yield-point phenomena and nonhomogeneous plastic deformation and its applicationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Reduction of Residual Stress in Sputter-Deposited Films by Ion-Bombardment

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Identification of material parameters in constitutive models for metal and metal/polymer composite sheets by elasto-plastic inverse analyzesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Formability of Sheet Metal Laminates Consisting of Layrs of Less Formbility or Weak Laminate BoundariesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

樹脂サンドイッチ鋼板のプレス形成時の粘弾塑性大変形挙動とはく離条件Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Deformation Characteristics and Press-Formability of Steel/Aluminium Clad Sheet MetalsPrincipal Investigator

Principal Investigator

Yoshida Fusahito 吉田総仁

YOSHIDA Fusahito 吉田総仁

吉田聡仁ヨシダフサヒト