• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

UEGAMI Kenjiro  上神 謙次郎

ORCIDConnect your ORCID iD *help
Researcher Number 50047180
External Links
Affiliation (based on the past Project Information) *help 1999 – 2000: 大阪市立大学, 工学部, 教授
1998: OSAKA CITY UNIVERSITY, DEPARTMENT OF ENGINEERING, PROFESSOR, 工学部・機械工学科, 教授
1997: 大阪市立大学, 工学部, 助教授
1990: Faculty of Engineering. Mechanical Engineering. Associate Professor., 工学部, 助教授
1989: 大阪市立大学, 工学部, 講師
1986 – 1987: 大阪市立大学, 工学部, 講師
Review Section/Research Field
Principal Investigator
機械工作・生産工学 / 機械工作
Except Principal Investigator
機械工作
Keywords
Principal Investigator
固溶硬化 / 酸化チタン / サファイアバイト / ホワイトサファイア / 切削工具 / 結晶方位 / cutting tool / grinding wheel / solid solution hardening / oxide titanium … More / white sapphire / WA abrasive grain / oxide aluminum / 砥石 / WA砥粒 / 酸化アルミニウム / SOLID SOLUTION HARDNESS / TITANIUM OXIDE / CRYSTAL ORIENTATION / SAPPHIRE CUTTING TOOL / WHITE SAPPHIRE / ALUMINUM OXIDE / ULTRA PECISION CUTTING / 異相分散硬化 / 単結晶酸化アルミニウム / 超精密切削 / Lapped Diamond Face, / Tool Wear, / Cutting Forces, / Mercator's Representation / Cutting Performance, / Diamond Tool, / すくい面の摩擦係数 / ダイヤモンド / 工具摩耗 / 研磨面の摩擦係数 / 工具すくい面・切りくず間摩擦係数 / 切削力 / メルカト-ル表示法 / 切削性能 / 単結晶ダイヤモンドバイト … More
Except Principal Investigator
lapping temperature / lapping foree ratio / cutting by diamond tool / frietion / lapping / crystallographic orientation / diamond / 研磨面段差形態 / へき開面 / 研磨円板の変質 / 研磨面粗さ / 研磨力比と研磨量の対応 / 研磨量 / 研磨力比 / 非揺動研磨 / 揺動研磨 / 結晶方位同定 / ラウエ班点 / X線回折 / 研磨 / ダイヤモンド / 切りくず凝着 / 切りくず工具間摩擦係数 / 切削力 / ダイヤモンド切削工具 / 研磨温度 / 摩擦異方性 / 研磨異方性 / 結晶方位 / ダイヤモンド研磨 Less
  • Research Projects

    (4 results)
  • Co-Researchers

    (6 People)
  •  Study on Application for Machining Tools of Hardened Alumina Material by Oxide TitaniumPrincipal Investigator

    • Principal Investigator
      UEGAMI Kenjiro
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      OSAKA CITY UNIVERSITY
  •  Ultra Precision Cutting of Steel by Oxide-Titanium Reinforced Sapphire Cutting ToolPrincipal Investigator

    • Principal Investigator
      UEGAMI Kenjiro
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      OSAKA CITY UNIVERSITY
  •  単結晶ダイヤモンドバイトの切削性能に及ぼす結晶方位の影響Principal Investigator

    • Principal Investigator
      UEGAMI Kenjiro
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Osaka City University
  •  Studies on Lapping of Diamond Cutting Tool

    • Principal Investigator
      TAMAMURA Kentaro
    • Project Period (FY)
      1985 – 1987
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Osaka City University
  • 1.  TAMAMURA Kentaro (30046841)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 2.  MORIMOTO Tokio (00047242)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 3.  WAKABAYASI Mikio (40047197)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 4.  富森 絋
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 5.  TOMIMORI Hirosi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 6.  冨森 紘
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi