takata shozo 高田祥三

… Alternative Names

TAKATA Shozo 高田祥三

Less

Researcher Number	50120340
Other IDs
External Links
Affiliation (Current)	2025: 早稲田大学, 理工学術院, 名誉教授
Affiliation (based on the past Project Information) *help	2012 – 2015: 早稲田大学, 理工学術院, 教授 2000 – 2003: 早稲田大学, 理工学部, 教授 1993 – 1996: 早稲田大学, 理工学部, 教授 1993 – 1994: 早稲田大学, 理工学部・工業経営学科, 教授 1990 – 1991: 大阪大学, 工学部, 助教授 1988 – 1989: 東洋大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / 機械工作 / 設計工学・機械要素・トライボロジー / Social systems engineering/Safety system Except Principal Investigator 機械工作・生産工学 / 機械工作
Keywords	Principal Investigator End Milling / Cutting Simulation / Preview Control / Adaptive Control of Machine Tool / 主軸回転数変動信号 / エンドミル加工 / 切削シミュレ-ション / 予見制御 / 工作機械の適応制御 / Virtual Manufacturing … More / Computer Mannequin / Manual Assembly Operations / Virtual Improvement / 生産モデリング / 生産システム / CAD / 工程設計 / 仮想生産 / コンピュータマネキン / 組立作業 / 仮想改善 / dynamic simulation system / life span evaluation / constraint network / modularization / QFD / quality design / part resuse / circular type manufacturing / ボールねじ / 劣化モデル / モジュール設計 / 機構シミュレーション / 部品再使用 / 機構シュミレーション / 部品耐用寿命推定 / 制約ネットワーク / モジュール構成法 / 品質機能展開 / 品質設計 / 部門再使用 / 循環型生産 / 安全システム / 循環型生産システム / シミュレーション工学 / 経営システム / ライフサイクルシミュレーション / プロダクト・サービスシステム / ビジネスモデル設計 / 環境調和型生産 / 劣化モード予測 / ライフサイクル / 保全 / 組立モデル / 設備モデル / 劣化メカニズム / 事例推論 / 劣化予測 / 設備保全 / 工作機械 / 劣化診断 / 故障診断 … More Except Principal Investigator シミュレーション / 仮想生産 / distributed processing / production process / integration / simulation / virtual manufacturing system / プロセスシミュレーション / プロセス / 分散処理 / 製造プロセス / 統合化 / 仮想生産システム / distributed simulation / modelling / manufacturing system / virtual manufacturing / 分散シミュレーション / モデリング / 生産システム / model-based / Cutting Simulation / Fault Recovery / Sensor Fusion / Intelligent Machine Fools / 自動復帰 / 異常検知,診断 / モデルベ-ス / 切削シミュレ-ション / 異常処理 / センサ融合 / インテリジェント工作機械 Less

Design support system of environmentally benign product service businessesPrincipal Investigator
- Principal Investigator
  
  takata shozo
- Project Period (FY)
  2012 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Waseda University
Virtual Improvement for quick commissioning of Production SystemsPrincipal Investigator
- Principal Investigator
  
  TAKATA Shozo
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Waseda University
Evaluation System for Developing Products with Improved Part ReusabilityPrincipal Investigator
- Principal Investigator
  
  TAKATA Shozo
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  設計工学・機械要素・トライボロジー
- Research Institution
  Waseda University
A Study on Integration of Process Simulations for Virtual Manufacturing Systems
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Osaka University
モデルベースFMEAのための生産設備モデルPrincipal Investigator
- Principal Investigator
  
  高田祥三
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Waseda University
事例推論を用いた生産設備の劣化予測に関する研究Principal Investigator
- Principal Investigator
  
  高田祥三
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Waseda University
A Study on Modelling and Distributed Simulation for Virtual Manufacturing Systems
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Osaka University
生産設備の自己劣化診断に関する研究Principal Investigator
- Principal Investigator
  
  高田祥三
- Project Period (FY)
  1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Osaka University
Development of Intellingent Machine Tools with Fault Recovery Function Using Sensor Fusion
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (A)
- Research Field
  
  機械工作
- Research Institution
  Osaka University
A Study on Preview Control of Machine Tools by Means of a Predicted Cutting Torque PatternPrincipal Investigator
- Principal Investigator
  
  TAKATA Shozo
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Toyo University, Faculty of Engineering

All 2016 2015 2013 2012 Other

All Journal Article Presentation

[Journal Article] Service Selection Method for Facilitating Life Cycle Options in Environmentally Benign Product and Service Business2016
- Author(s)
  J. Matsumura, Y. Dairokuno, S. Takata
- Journal Title
  
  The 23rd CIRP Conference on Life Cycle Engineering, Procedia CIRP
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] A　method　for　selecting　customer-oriented　service　and　delivery　modes　in　designing　environmentally　benign product service systems2015
- Author(s)
  Y. Dairokuno, J. Matsumura, S. Takata
- Journal Title
  
  Sustainability Through Innovation in Product Life Cycle Design, Proceedings of the 9th International Symposium on Environmentally Conscious Design and Inverse Manufacturing
  
  Volume: - Pages: 343-350
- DOI
  10.1007/978-981-10-0471-1_17
- ISBN
  9789811004698, 9789811004711
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] Module-based Renewal Planning of Energy Using Products for Reducing Environmental Load and Life Cycle Cost2015
- Author(s)
  H. Iijima, S. Takata
- Journal Title
  
  The 22nd CIRP Conference on Life Cycle Engineering, Procedia CIRP
  
  Volume: 29 Pages: 162-167
- DOI
  10.1016/j.procir.2015.02.172
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] BOM based supply chain risk management2013
- Author(s)
  S. Takata, M. Yamanaka
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 62/1 Issue: 1 Pages: 479-482
- DOI
  10.1016/j.cirp.2013.03.039
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] Maintenance-centered Circular Manufacturing2013
- Author(s)
  S. Takata
- Journal Title
  
  Procedia CIRP -2nd International Through-life Engineering Services Conference-
  
  Volume: 11 Pages: 23-31
- DOI
  10.1016/j.procir.2013.07.066
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] Module Reconfiguration Management for Circular Factories without Discriminating between Virgin and Reused Products2013
- Author(s)
  K. Urano, S. Takata
- Journal Title
  
  Proceedings of the 20th CIRP International Conference on Life Cycle Engineering
  
  Volume: 2013 Pages: 603-608
- DOI
  10.1007/978-981-4451-48-2_98
- ISBN
  9789814451475, 9789814451482
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] Toward integrated product and process life cycle planning-An environmental perspective2012
- Author(s)
  Y. Umeda, S. Takata, F. Kimura, T. Tomiyama, J. W. Sutherland, S. Kara, C. Herrmann, J. R. Duflou
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 61/2 Issue: 2 Pages: 681-702
- DOI
  10.1016/j.cirp.2012.05.004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510207
[Journal Article] Reconfiguration Management of Remanufactured Products for Responding to Varied User Needs2012
- Author(s)
  T. Sakai, S. Takata
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 61/1 Issue: 1 Pages: 21-24
- DOI
  10.1016/j.cirp.2012.03.121
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24510207
[Presentation] Reconfiguration Management of Remanufactured Products for Responding to Varied User Needs2012
- Author(s)
  T. Sakai, S. Takata
- Organizer
  62nd CIRP General Assembly
- Place of Presentation
  Hong Kong
- Data Source
  KAKENHI-PROJECT-24510207
[Presentation] A Method for Selecting Delivery Modes in Environmentally Benign Product Service System Design2012
- Author(s)
  E. Matsumoto, J. Ohtake, J. Okada, S. Takata
- Organizer
  4th CIRP International Conference on Industrial Product-Service Systems
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-24510207
[Presentation] Novel Reuse Management for Circular Manufacturing2012
- Author(s)
  S.Takata, K. Urano
- Organizer
  10th Global Conference on Sustainable Manufacturing -Towards Implementing Sustainable Manufacturing
- Place of Presentation
  Istanbul
- Data Source
  KAKENHI-PROJECT-24510207
[Presentation] Module based renewal planning of energy using products for reducing environmental load and life cycle cost
- Author(s)
  H. Iijima, S. Takata
- Organizer
  The 22nd CIRP Conference on Life Cycle Engineering
- Place of Presentation
  Sydney, Australia
- Year and Date
  2015-04-07 – 2015-04-09
- Data Source
  KAKENHI-PROJECT-24510207

1. IWATA Kazuaki (30031066)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
2. ONOSATO Masahiko (80177279)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. OBA Fuminori (10081267)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. KIMURA Fumihiko (60133104)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. ITO Yoshimi (60016441)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
6. MUNECHIKA Masahiko (10200247)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. ONARI Hisashi (60277853)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. IDE. Kiyoshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

takata shozo 高田 祥三

TAKATA Shozo 高田 祥三

Research Projects

Research Products

Co-Researchers

Design support system of environmentally benign product service businessesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Virtual Improvement for quick commissioning of Production SystemsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation System for Developing Products with Improved Part ReusabilityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Integration of Process Simulations for Virtual Manufacturing Systems

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

モデルベースFMEAのための生産設備モデルPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

事例推論を用いた生産設備の劣化予測に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Modelling and Distributed Simulation for Virtual Manufacturing Systems

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

生産設備の自己劣化診断に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Intellingent Machine Tools with Fault Recovery Function Using Sensor Fusion

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Preview Control of Machine Tools by Means of a Predicted Cutting Torque PatternPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Service Selection Method for Facilitating Life Cycle Options in Environmentally Benign Product and Service Business2016

Author(s)

Journal Title

Data Source

[Journal Article] A method for selecting customer-oriented service and delivery modes in designing environmentally benign product service systems2015

Author(s)

Journal Title

DOI

ISBN

Data Source

[Journal Article] Module-based Renewal Planning of Energy Using Products for Reducing Environmental Load and Life Cycle Cost2015

Author(s)

Journal Title

DOI

Data Source

takata shozo 高田祥三

TAKATA Shozo 高田祥三

[Journal Article] A　method　for　selecting　customer-oriented　service　and　delivery　modes　in　designing　environmentally　benign product service systems2015