• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

OGAWA Takeshi  小川 武史

ORCIDConnect your ORCID iD *help
Researcher Number 50167318
External Links
Affiliation (based on the past Project Information) *help 2012 – 2017: 青山学院大学, 理工学部, 教授
2006 – 2010: 青山学院大学, 理工学部, 教授
2001: Aoyama Gakuin University, Professor, 理工学部, 教授
1997 – 2001: 青山学院大学, 理工学部, 助教授
1994 – 1996: 岐阜大学, 工学部, 助教授
1990 – 1991: 岐阜大学, 工学部, 助教授
1989: 岐阜大学, 工学部, 助手
Review Section/Research Field
Principal Investigator
Materials/Mechanics of materials / 機械材料工学 / Materials/Mechanics of materials
Except Principal Investigator
Materials/Mechanics of materials / Physical properties of metals
Keywords
Principal Investigator
構造・機能材料 / 材料強度 / 信頼性評価 / 接合技術 / インデンテーション法 / 疲労強度 / 超音波疲労 / マイクロ材料力学 / 航空機材料 / アルミニウムーリチウム合金 … More / 回転曲げ / 時効条件 / 腐食疲労 / 切欠き効果 / 停留き裂 / き裂進展限界 / き裂発生限界 / 腐食ピット / き裂発生 / き裂成長 / Al-li合金 / 疲労き裂発生 / 微小疲労き裂成長 / 破壊機構 / Aircraft Material / Aluminum-Lithium alloy / Fatigue Strength / Rotating Bending / Aging Condition / Corrosion Fatigue / Notch Effect / 表面薄膜 / 材料健全性 / 表面処理 / 溶射 / Surface coating / Fatigue strength / Materials integrity / Surface treatment / Spraying / 超高サイクル疲労 / 内部き裂 / 光ファイバーセンサー / アコースティック・エミッション / 機械材料・材料力学 / 疲労 / AE / Ultrasonic fatigue / Very high cycle fatigue / Sub-surface crack / Optical fiber sensor / Acoustic emission / 局所力学特性 / 水素助長き裂進展機構 / 超長寿命域 / 水素 … More
Except Principal Investigator
金属間化合物 / 疲労強度 / 疲労き裂進展 / 組織 / 破壊機構 / 転がり疲労 / モードII疲労 / 疲労き裂試験方法 / アルミニウム合金 / Rolling contact fatigue / Flaking failure / Mode II fatigue / Testing method for fatigue crack / Aluminum alloy / 射出成形 / 静的機械的性質 / 高温 / セラミックス / 剥離型破損 / 高張力鋼 / Ceramics / High tensile strength steel / はく離型破損 / 高炭素クロム軸受鋼 / ニッケルクロモリブデン鋼 / ニッケルクロムモリブデン鋼 / High carbon chromium steel Less
  • Research Projects

    (10 results)
  • Research Products

    (50 results)
  • Co-Researchers

    (10 People)
  •  Investigation of hydrogen assisted crack growth mechanism in very long life regime based on the evaluation of local mechanical propertiesPrincipal Investigator

    • Principal Investigator
      Ogawa Takeshi
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Aoyama Gakuin University
  •  Fracture simulation of joints based on the evaluation of local fatigue strengthPrincipal Investigator

    • Principal Investigator
      OGAWA Takeshi
    • Project Period (FY)
      2012 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Aoyama Gakuin University
  •  Multi-scale evaluation of joint part based on local material testingPrincipal Investigator

    • Principal Investigator
      OGAWA Takeshi
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Aoyama Gakuin University
  •  Development of AE system for detecting sub-surface crack due to very high cycle fatigue at reduced temperaturePrincipal Investigator

    • Principal Investigator
      OGAWA Takeshi
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Aoyama Gakuin University
  •  Evaluation of Rolling Contact Fatigue Characteristics of Bearing and Rolling Materials by Mode II Fatigue Testing

    • Principal Investigator
      KO Haeng-nam
    • Project Period (FY)
      1999 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Nakanihon Automotive College
  •  Title of project: A study on the evaluations of fatigue strength and materials integrity of hard surface coatingsPrincipal Investigator

    • Principal Investigator
      OGAWA Takeshi
    • Project Period (FY)
      1997 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Aoyama Gakuin University
  •  Development of Mode II Testing Method for Ceramics as Damage Model under Rolling Contact Fatigue

    • Principal Investigator
      KO Haeng-Nam
    • Project Period (FY)
      1996 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Nakanihon Automotive College
  •  金属間化合物TiAlの疲労特性の組織最適化に関する研究

    • Principal Investigator
      戸梶 恵郎
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Physical properties of metals
    • Research Institution
      Gifu University
  •  射出成形した金属間化合物TiAlの常温および高温における疲労特性の評価

    • Principal Investigator
      TOKAJI Keiro
    • Project Period (FY)
      1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      Gifu University
  •  Evaluation of Fatigue Properties in Future Aircraft Material, Aluminum-Lithium AlloyPrincipal Investigator

    • Principal Investigator
      OGAWA Takeshi, 戸梶 惠郎 (戸梶 恵郎)
    • Project Period (FY)
      1989 – 1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械材料工学
    • Research Institution
      Gifu University

All 2018 2017 2016 2014 2012 2010 2009 2008 2007 Other

All Journal Article Presentation

  • [Journal Article] Investigation of the indentation size effect based on measurement of the geometrically necessary dislocation density by electron backscatter diffraction2018

    • Author(s)
      Shota HASUNUMA, Hirohisa MIYAZAKI, Kensuke SHIMADA, Takeshi OGAWA
    • Journal Title

      Mechanical Engineering Journal

      Volume: 5 Issue: 2 Pages: 17-00638

    • DOI

      10.1299/mej.17-00638

    • NAID

      130006707937

    • ISSN
      2187-9745
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Journal Article] Measurement of Tensile Deformation Behavior and Strength Evaluation Based on Local Mechanical Properties of Weld Joint of Steel Plates2017

    • Author(s)
      中島 康毅、蓮沼 将太、小川 武史、山谷 真和、櫻井 一弥
    • Journal Title

      JHPIJ

      Volume: 55 Issue: 6 Pages: 303-312

    • DOI

      10.11181/hpi.55.303

    • NAID

      130006275082

    • ISSN
      0387-0154, 1347-9598
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Journal Article] Study on Evaluation Methods for Stress Corrosion Cracking and Fatigue Crack Growth of Aluminum Alloys for Hydrogen Containers2016

    • Author(s)
      小川武史,蓮沼将太,渡邉翔太,寒川直輝,金崎俊彦,間野覚文,宮川一夫
    • Journal Title

      JHPIJ

      Volume: 54 Issue: 6 Pages: 277-288

    • DOI

      10.11181/hpi.54.277

    • NAID

      130006846362

    • ISSN
      0387-0154, 1347-9598
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Journal Article] Estimation of Local Mechanical Properties of Steels by Hardness Tests and Its Application to Welded Pipes2016

    • Author(s)
      中島弘毅,齋藤裕樹,蓮沼将太,小川武史
    • Journal Title

      JHPIJ

      Volume: 54 Issue: 1 Pages: 16-24

    • DOI

      10.11181/hpi.54.16

    • NAID

      130005126555

    • ISSN
      0387-0154, 1347-9598
    • Language
      Japanese
    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Journal Article] 自動車用リベット継ぎ手の予ひずみ量の推定および疲労強度評価2014

    • Author(s)
      大関裕明,野呂亮太,蓮沼将太,小川武史,中丸敏明
    • Journal Title

      自動車技術会論文集

      Volume: 45 Pages: 589-595

    • NAID

      130006319379

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-24560110
  • [Journal Article] Evaluation of Local Mechanical Properties of High Strength Steels by Indentation Method2012

    • Author(s)
      小森貴史,金田 忍,小川武史,坂中則暁,松原幸生
    • Journal Title

      JSMET

      Volume: 78 Issue: 789 Pages: 646-650

    • DOI

      10.1299/kikaia.78.646

    • NAID

      130002050285

    • ISSN
      0387-5008, 1884-8338
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560110
  • [Journal Article] インデンテーション法による高強度鋼の局所力学特性評価2012

    • Author(s)
      小川武史,坂中則暁,松原幸生
    • Journal Title

      NTN TECHNICAL REVIEW

      Volume: 80 Pages: 58-63

    • NAID

      40019492734

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-24560110
  • [Journal Article] インデンテーション法によるWC-Co溶射材の静的および疲労強度特性評価2010

    • Author(s)
      中西公紀, 坂上賢一, 小川武史, 小林圭史
    • Journal Title

      日本機械学会論文集A編

      Volume: 76巻 Pages: 902-907

    • NAID

      110007685191

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] インデンテーション法によるDLC膜の静的および疲労強度評価2009

    • Author(s)
      中山朝之, 坂上賢一, 小川武史
    • Journal Title

      材料試験技術 54巻

      Pages: 239-244

    • NAID

      40016865726

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] インデンテーション法によるDLC膜の力学特性の評価および基材の影響2009

    • Author(s)
      中山朝之, 坂上賢一, 小川武史, 小林圭史, 寺谷武馬
    • Journal Title

      材料 58巻

      Pages: 833-840

    • NAID

      130000133212

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] インデンテーション法による電子部品接合部の力学特性評価および微視組織解析2009

    • Author(s)
      中村崇諒, 坂上賢一, 小川武史, 林富美男
    • Journal Title

      材料試験技術 54巻

      Pages: 254-258

    • NAID

      40016865728

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] Evaluation of Giga-cycle Fatigue Properties of Austenitic Stainless Steels Using Ultrasonic Fatigue Test2008

    • Author(s)
      Kyouhei, TAKAHASHI, Takeshi, OGAWA
    • Journal Title

      Journal of Solid Mechanics and Materials Engineering 2, 3

      Pages: 366-373

    • NAID

      110004997340

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Journal Article] ポリプロピレンのインデンテーション法によるクリープ特性評価2008

    • Author(s)
      岡崎信平, 坂上賢一, 小川武史, 坂本博夫
    • Journal Title

      材料試験技術 53巻

      Pages: 273-279

    • NAID

      40016299499

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] ポリプロピレンのインデンテーション法によるクリープ特性評価2008

    • Author(s)
      岡崎信平, 坂上賢一, 小川武史, 坂本博夫
    • Journal Title

      材料試験技術 53

      Pages: 273-279

    • NAID

      40016299499

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] インデンテーション法による粘弾性特性の評価と時間-温度換算則の適用2008

    • Author(s)
      坂上賢一, 岡崎信平, 小川武史
    • Journal Title

      日本機械学会論文集(A)編 75巻

      Pages: 1045-10505

    • NAID

      110007359922

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Journal Article] き裂先端変位場を用いた疲労き裂進展駆動力の評価[き裂先端塑性域およびき裂開閉口の影響]2007

    • Author(s)
      小川 武史
    • Journal Title

      材料試験技術 52

      Pages: 132-138

    • NAID

      40015587665

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Journal Article] き裂先端変位場を用いた疲労き裂進展駆動力の評価[き裂先端塑性域およびき裂開閉口の影響]2007

    • Author(s)
      小川 武史
    • Journal Title

      材料試験技術 52巻

      Pages: 132-138

    • NAID

      40015587665

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Journal Article] オーステナイト系ステンレス鋼の超音波疲労試験=超高サイクル疲労強度評価2007

    • Author(s)
      小川 武史
    • Journal Title

      超音波テクノ 19巻

      Pages: 60-64

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Journal Article] Ultrasonic fatigue test for austenitic stainless steel - Evaluation of very high cycle fatigue2007

    • Author(s)
      Takeshi, OGAWA
    • Journal Title

      Ultrasonic technology 19, 3

      Pages: 60-64

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Journal Article] Evaluation of Fatigue Crack Driving Force from Displacement Fields around the Crack Tip - The effects of crack tip plastic zone and crack closure2007

    • Author(s)
      Takeshi, OGAWA, Yosuke, KOBAYASHI, Keiko, HATTORI
    • Journal Title

      Journal of Material Testing Research association of Japan 52, 3

      Pages: 132-138

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Journal Article] オーステナイト系ステンレス鋼の超音波疲労試験=超高サイクル疲労強度評価=2007

    • Author(s)
      小川武史
    • Journal Title

      著音波テクノ(日本工業出版(株)) 6月号(印刷中)

    • Data Source
      KAKENHI-PROJECT-18560085
  • [Presentation] Al-Mg-Si系合金の湿潤ガス応力腐食割れ特性に及ぼす化学成分の影響2017

    • Author(s)
      平野翔覇,白輪地峻輝,蓮沼将太,小川武史
    • Organizer
      日本機械学会関東支部第23期総会・講演会
    • Place of Presentation
      東京理科大学
    • Year and Date
      2017-03-16
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Presentation] 疲労き裂進展または応力腐食割れ機構が支配的となるアルミニウム合金のき裂進展特性2017

    • Author(s)
      齋藤 奨, 加藤俊輔, 鈴木俊平, 蓮沼将太, 小川武史, 間野覚文, 宮川一夫
    • Organizer
      M&M2017 材料力学カンファレンス
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Presentation] 湿潤環境におけるアルミニウム合金の超低速疲労き裂進展挙動の検討2017

    • Author(s)
      鈴木俊平, 蓮沼将太, 小川武史, 間野覚文, 宮川一夫
    • Organizer
      M&M2017 材料力学カンファレンス
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Presentation] Al-Mg-Si 系合金の湿潤大気中応力腐食割れの評価方法2016

    • Author(s)
      小川武史, 渡邉翔太, 川元裕介, 蓮沼将太
    • Organizer
      日本機械学会2016年度年次大会
    • Place of Presentation
      九州大学
    • Year and Date
      2016-09-12
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Presentation] 6000系Al合金の湿潤大気中応力腐食割れ特性に及ぼす微小荷重変動の影響2016

    • Author(s)
      加藤俊輔,蓮沼将太, 小川 武史, 間野 覚文, 宮川 一夫
    • Organizer
      日本機械学会2016年度年次大会
    • Place of Presentation
      九州大学
    • Year and Date
      2016-09-12
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Presentation] 6000系Al合金の高応力比における疲労き裂進展特性の超音波疲労試験による評価2016

    • Author(s)
      鈴木俊平, 蓮沼将太, 小川武史, 間野覚文, 宮川一夫
    • Organizer
      日本機械学会2016年度年次大会
    • Place of Presentation
      九州大学
    • Year and Date
      2016-09-12
    • Data Source
      KAKENHI-PROJECT-15K05686
  • [Presentation] 自動車用SPR継ぎ手の疲労強度に及ぼす塑性予ひずみの影響2014

    • Author(s)
      野呂亮太,上 祐貴,蓮沼将太,小川武史,中丸敏明
    • Organizer
      自動車技術会2014年春季大会
    • Place of Presentation
      横浜:パシフィコ横浜
    • Year and Date
      2014-05-23
    • Data Source
      KAKENHI-PROJECT-24560110
  • [Presentation] インデンテーション法による粘弾性特性のマスター曲線評価2010

    • Author(s)
      坂上賢一, 小川武史
    • Organizer
      日本実験力学会2010年度年次講演会
    • Year and Date
      2010-08-19
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] 局所材料試験に基づく複合材料の力学モデルの構築2010

    • Author(s)
      井澤友朗, 坂上賢一, 小川武史, 吉本崇広
    • Organizer
      日本実験力学会2010年度年次講演会
    • Year and Date
      2010-08-19
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法によるDLC薄膜の力学特性評価2009

    • Author(s)
      中山朝之, 坂上賢一, 小川武史
    • Organizer
      日本材料学会 第58期学術講演会
    • Place of Presentation
      愛媛大学(愛媛)
    • Year and Date
      2009-05-24
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による高分子材料の粘弾性特性評価2009

    • Author(s)
      坂上賢一, 岡崎信平, 小川武史
    • Organizer
      日本機械学会M&M2009材料力学カンファレンス
    • Place of Presentation
      札幌コンベンションセンター(札幌)
    • Year and Date
      2009-07-24
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] 繰返しインデンテーション法によるサーメット溶射材の疲労強度特性評価2009

    • Author(s)
      中西公紀, 坂上賢一, 小川武史, 小林圭史
    • Organizer
      日本機械学会M&M2009材料力学カンファレンス
    • Place of Presentation
      札幌コンベンションセンター(札幌)
    • Year and Date
      2009-07-25
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法によるDLC薄膜の力学特性評価2009

    • Author(s)
      中山朝之, 坂上賢一, 小川武史
    • Organizer
      日本材料学会第58期学術講演会
    • Year and Date
      2009-05-24
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] 繰返しインデンテーション法によるサーメット溶射材の疲労強度特性評価2009

    • Author(s)
      中西公紀, 坂上賢一, 小川武史, 小林圭史
    • Organizer
      M&M2009材料力学カンファレンス
    • Year and Date
      2009-07-25
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] 高純度Alボンディングワイヤの力学特性評価2009

    • Author(s)
      矢野一成, 坂上賢一, 小川武史
    • Organizer
      M&M2009材料力学カンファレンス
    • Year and Date
      2009-07-25
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] 高純度Alボンディングワイヤの力学特性評価2009

    • Author(s)
      矢野一成, 坂上賢一, 小川武史
    • Organizer
      日本機械学会M&M2009材料力学カンファレンス
    • Place of Presentation
      札幌コンベンションセンター(札幌)
    • Year and Date
      2009-07-25
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による高分子材料の粘弾性特性評価2009

    • Author(s)
      坂上賢一, 岡崎信平, 小川武史
    • Organizer
      M&M2009材料力学カンファレンス
    • Year and Date
      2009-07-24
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による高分子材料のクリープコンプライアンスの測定2008

    • Author(s)
      岡崎信平, 坂上賢一, 伊藤史, 小川武史
    • Organizer
      日本機械学会2008年度年次大会
    • Year and Date
      2008-08-04
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による局所力学特性評価および微視組織解析2008

    • Author(s)
      小川武史, 坂上賢一
    • Organizer
      日本学術振興会将来加工技術第136委員会
    • Year and Date
      2008-08-22
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による粘弾性特性の評価と時間-温度換算則の適用2008

    • Author(s)
      坂上賢一, 岡崎信平, 伊藤史, 小川武史
    • Organizer
      日本機械学会M&M2008材料力学カンファレンス
    • Place of Presentation
      立命館大学
    • Year and Date
      2008-09-17
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] スポットおよびレーザ溶接部の局所力学特性評価と変形シミュレーション2008

    • Author(s)
      中村五大, 小川武史, 坂上賢一
    • Organizer
      自動車技術会2008年秋季大会学術講演会
    • Year and Date
      2008-10-24
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による粘弾性特性の評価と時間-温度換算則の適用2008

    • Author(s)
      坂上賢一, 岡崎信平, 伊藤史, 小川武史
    • Organizer
      M&M2008材料力学カンファレンス
    • Year and Date
      2008-09-17
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] インデンテーション法による電子部品接合部の力学的特性評価および微視組織解析2008

    • Author(s)
      坂上賢一, 小川武史, 中村崇諒, 林富美男
    • Organizer
      日本機械学会M&M2008材料力学カンファレンス
    • Place of Presentation
      立命館大学
    • Year and Date
      2008-09-16
    • Data Source
      KAKENHI-PROJECT-20560085
  • [Presentation] オーステナイト系ステンレス鋼の高サイクル疲労強度に及ぼす予ひずみの影響2007

    • Author(s)
      小川 武史
    • Organizer
      日本高圧力技術協会平成19年度秋期講演会
    • Place of Presentation
      仙台市情報・産業プラザ
    • Year and Date
      2007-11-08
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Presentation] オーステナイト系ステンレス鋼の高サイクル疲労強度に及ぼす予ひずみの影響2007

    • Author(s)
      小川 武史
    • Organizer
      日本高圧力技術協会平成19年度秋期講演会
    • Place of Presentation
      仙台市情報、産業プラザ
    • Year and Date
      2007-11-08
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Presentation] The effect of pre-strain on the high cycle fatigue strength of austenitic stainless steel2007

    • Author(s)
      Takeshi, OGAWA
    • Organizer
      Fall conference of High Pressure Institute of Japan (HPI) in 2007
    • Place of Presentation
      Sendai
    • Year and Date
      2007-12-08
    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560085
  • [Presentation] 自動車用リベット継手の予ひずみ量の推定および疲労強度評価

    • Author(s)
      大関裕明,野呂亮太,蓮沼将太,小川武史,中丸敏明
    • Organizer
      自動車技術会№05-13シンポジウム
    • Place of Presentation
      発明会館ホール
    • Data Source
      KAKENHI-PROJECT-24560110
  • [Presentation] セルフピアスリベット継ぎ手部の塑性ひずみ量の推定と疲労強度の検討

    • Author(s)
      野呂亮太,大関裕明,蓮沼将太,小川武史,中丸敏明
    • Organizer
      日本機械学会M&M2013材料力学カンファレンス
    • Place of Presentation
      岐阜大学
    • Data Source
      KAKENHI-PROJECT-24560110
  • [Presentation] 三角錐圧子を用いた硬さ試験による弾塑性応力ひずみ関係の推定法

    • Author(s)
      齋藤裕樹,小森貴史,蓮沼将太,小川武史
    • Organizer
      日本機械学会M&M2013材料力学カンファレンス
    • Place of Presentation
      岐阜大学
    • Data Source
      KAKENHI-PROJECT-24560110
  • 1.  TOKAJI Keiro (80021616)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 2.  KO Haeng-Nam (80141399)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 3.  OTSUKA Akio (60022993)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 4.  KATOH Yasuo (90259292)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  SAKAUE Kenichi (40383509)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 23 results
  • 6.  ITOGA Hisatake (70310539)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 7.  HASEGAWA Tatsuya (30300156)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 8.  塩田 祐久 (80262749)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 9.  竹本 幹男 (40082838)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  蓮沼 将太 (50709764)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 10 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi