TAKASHIMA Yasuhito 高嶋康人

Researcher Number	50397692
Other IDs
Affiliation (based on the past Project Information) *help	2017 – 2019: 大阪大学, 接合科学研究所, 助教
Review Section/Research Field	Principal Investigator Composite materials/Surface and interface engineering / Basic Section 26030:Composite materials and interfaces-related Except Principal Investigator Medium-sized Section 24:Aerospace engineering, marine and maritime engineering, and related fields
Keywords	Principal Investigator 異材継手 / 動的負荷 / 断熱変形 / シャルピー衝撃特性 / 破壊靭性 / 接合 / 衝撃特性 / 動的解析 / 重ね継手 / 引張せん断強度 / レーザ溶接 / 異材接合 / 継手強度 … More Except Principal Investigator … More

異材重ね継手の動的破壊プロセスの解明による強度評価手法の開発Principal Investigator
- Principal Investigator
  
  高嶋康人
- Project Period (FY)
  2019
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26030:Composite materials and interfaces-related
- Research Institution
  Osaka University
船体脆性き裂伝播停止性能の飛躍的改善をもたらすミクロ組織および構造設計の新視点Ongoing
- Principal Investigator
  
  川畑友弥
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Challenging Research (Pioneering)
- Review Section
  
  Medium-sized Section 24:Aerospace engineering, marine and maritime engineering, and related fields
- Research Institution
  The University of Tokyo
Elucidation of impact toughness controlling factor of dissimilar joints for multi-materials design of automobilePrincipal Investigator
- Principal Investigator
  
  TAKASHIMA Yasuhito
- Project Period (FY)
  2017 – 2018
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Composite materials/Surface and interface engineering
- Research Institution
  Osaka University

All 2021 2020 2019 2018

All Journal Article Presentation

[Journal Article] Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels2021
- Author(s)
  Yasuhito TAKASHIMA, Tomo WASHIO, Fumiyoshi MINAMI
- Journal Title
  
  Materials Science Forum
  
  Volume: in press
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K05030
[Journal Article] Effect of the stress field on crack branching in brittle material2020
- Author(s)
  Noritaka Nakamura, Tomoya Kawabata, Yasuhito Takashima, Fuminori Yanagimoto
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: Volume 108 Pages: 102583-102592
- DOI
  10.1016/j.tafmec.2020.102583
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K20354
[Journal Article] Numerical investigation of CTOD estimation methods for laser welds2020
- Author(s)
  Takashima Yasuhito、Shao Chendong、Lu Fenggui、Minami Fumiyoshi
- Journal Title
  
  Welding in the World
  
  Volume: 64 Pages: 1185-1193
- DOI
  10.1007/s40194-020-00904-4
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K05030
[Journal Article] Historical review of research on brittle crack propagation arresting technology for large welded steel structures developed in Japan with the development of Kca parameters2020
- Author(s)
  Kawabata Tomoya、Inoue Takehiro、Tagawa Tetsuya、Fukui Tsutomu、Takashima Yasuhito、Shibanuma Kazuki、Aihara Shuji
- Journal Title
  
  Marine Structures
  
  Volume: 71 Pages: 102737-102737
- DOI
  10.1016/j.marstruc.2020.102737
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H03811, KAKENHI-PROJECT-20K20354
[Journal Article] Increase in micro-cracks beneath cleavage fracture surface in carbon steel ESSO specimens2019
- Author(s)
  Takashima Yasuhito、Kawabata Tomoya、Deguchi Ryosuke、Yamada Suguru、Minami Fumiyoshi
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 101 Pages: 365-372
- DOI
  10.1016/j.tafmec.2019.02.013
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K20354
[Journal Article] Effect of triaxial stress distribution upon roughness of brittle fracture surface2019
- Author(s)
  Noritaka Nakamura, Tomoya Kawabata, Yasuhito Takashima, Yuki Nishizono and Fuminori Yanagimoto
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 300(3-4) Pages: 11007-11014
- DOI
  10.1051/matecconf/201930011007
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K20354
[Journal Article] Controlling factors for roughness increases on cleavage fracture surfaces and crack branching in polycrystalline steel2019
- Author(s)
  Kawabata Tomoya、Tonsho Fumiaki、Nishizono Yuki、Nakamura Noritaka、Takashima Yasuhito
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 100 Pages: 171-180
- DOI
  10.1016/j.tafmec.2019.01.010
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K20354
[Journal Article] Numerical Analysis of Temperature Rise during Dynamic Loading for Dissimilar Steel Joint Specimen2018
- Author(s)
  Y. Takashima, and F. Minami
- Journal Title
  
  Materials Science Forum
  
  Volume: 941 Pages: 280-286
- DOI
  10.4028/www.scientific.net/msf.941.280
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14822
[Presentation] Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels2021
- Author(s)
  Yasuhito TAKASHIMA, Tomo WASHIO, Fumiyoshi MINAMI
- Organizer
  THERMEC 2020/2021
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K05030
[Presentation] Effect of triaxial stress distribution upon roughness of brittle fracture surface2019
- Author(s)
  Noritaka Nakamura, Yasuhito TAKASHIMA, Tomoya KAWABATA and Fumiyoshi MINAMI
- Organizer
  ICMFF12, 12TH INTERNATIONAL CONFERENCE ON MULTIAXIAL FATIGUE AND FRACTURE, June, 2019, Bordeaux
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K20354
[Presentation] 応力多軸度が脆性破面粗さに与える影響の調査2019
- Author(s)
  中村徳孝, 川畑友弥, 高嶋康人, 西薗祐希, 柳本史教
- Organizer
  2019年日本船舶海洋工学会春季講演会,　2019.6
- Data Source
  KAKENHI-PROJECT-20K20354
[Presentation] Numerical Investigation of Temperature Rise Near Crack-Tip in Steel Plate During Brittle Crack Propagation2019
- Author(s)
  Yasuhito TAKASHIMA, Tomoya KAWABATA, Fumiyoshi MINAMI
- Organizer
  International Symposium on Impact Engineering 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K05030
[Presentation] Numerical Investigation of Temperature Rise Near Crack-Tip in Steel Plate During Brittle Crack Propagation2019
- Author(s)
  Noritaka Nakamura, Tomoya Kawabata, Yasuhito Takashima, Yuki Nishizono and Fuminori Yanagimoto
- Organizer
  International Symposium on Impact Engineering 2019;2nd-5th July, Gmunden Austria
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K20354
[Presentation] Explicit finite element analysis of dynamic response of dissimilar steel joint specimen2019
- Author(s)
  Y. Takashima, and F. Minami
- Organizer
  The IIW 2019 Intermadiate Meeting
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14822
[Presentation] Numerical investigation on the crack propagation behavior along the interfaces in dissimilar steel welded joint2018
- Author(s)
  L. Zhao, Y. Takashima, H. Cui, F. Minami, and F. Lu
- Organizer
  The IIW 2018 Annual assembly
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14822
[Presentation] Numerical analysis of temperature rise during dynamic loading for dissimilar steel joint specimen2018
- Author(s)
  Y. Takashima and F. Minami
- Organizer
  THERMEC'2018: INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14822
[Presentation] Fracture toughness evaluation for dissimilar steel joints by Charpy impact test2018
- Author(s)
  Y. Takashima, Y. Ito, F. Lu, and F. Minami
- Organizer
  The IIW 2018 Annual assembly
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14822

1. 川畑友弥 (50746815)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
2. 柴沼一樹

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

TAKASHIMA Yasuhito 高嶋 康人

Research Projects

Research Products

Co-Researchers

異材重ね継手の動的破壊プロセスの解明による強度評価手法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

船体脆性き裂伝播停止性能の飛躍的改善をもたらすミクロ組織および構造設計の新視点Ongoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Elucidation of impact toughness controlling factor of dissimilar joints for multi-materials design of automobilePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels2021

Author(s)

Journal Title

Data Source

[Journal Article] Effect of the stress field on crack branching in brittle material2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Numerical investigation of CTOD estimation methods for laser welds2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Historical review of research on brittle crack propagation arresting technology for large welded steel structures developed in Japan with the development of Kca parameters2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Increase in micro-cracks beneath cleavage fracture surface in carbon steel ESSO specimens2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of triaxial stress distribution upon roughness of brittle fracture surface2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Controlling factors for roughness increases on cleavage fracture surfaces and crack branching in polycrystalline steel2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Numerical Analysis of Temperature Rise during Dynamic Loading for Dissimilar Steel Joint Specimen2018

Author(s)

Journal Title

DOI

Data Source

[Presentation] Evaluation of Tensile Shear Strength for Lap Joint of Dissimilar Steels2021

Author(s)

Organizer

Data Source

[Presentation] Effect of triaxial stress distribution upon roughness of brittle fracture surface2019

Author(s)

Organizer

Data Source

[Presentation] 応力多軸度が脆性破面粗さに与える影響の調査2019

Author(s)

Organizer

Data Source

[Presentation] Numerical Investigation of Temperature Rise Near Crack-Tip in Steel Plate During Brittle Crack Propagation2019

Author(s)

Organizer

Data Source

[Presentation] Numerical Investigation of Temperature Rise Near Crack-Tip in Steel Plate During Brittle Crack Propagation2019

Author(s)

Organizer

TAKASHIMA Yasuhito 高嶋康人