Kawamura Hironobu 川村大伸

… Alternative Names

KAWAMURA Hironobu 川村大伸

Less

Researcher Number	50548261
Other IDs
Affiliation (Current)	2025: 名古屋工業大学, 工学(系)研究科(研究院), 准教授
Affiliation (based on the past Project Information) *help	2015 – 2020: 名古屋工業大学, 工学(系)研究科(研究院), 准教授 2014: 筑波大学, システム情報工学研究科, 助教 2013 – 2014: 筑波大学, システム情報系, 助教 2012 – 2014: 筑波大学, システム情報工学研究科(系), 助教 2010 – 2011: 東京理科大学, 理工学部, 助教
Review Section/Research Field	Principal Investigator Social systems engineering/Safety system / Social systems engineering/Safety system Except Principal Investigator Social systems engineering/Safety system
Keywords	Principal Investigator 実験計画法 / 管理図 / 統計的工程管理 / 統計的品質管理 / 品質管理 / ベイズ統計 / 過飽和計画 / 多品種少量生産 / 産業観光 / ボックスメイヤーメソッド … More / モニタリング / サービスマーケティング / 外食産業 / クチコミ / ものづくり / 観光 / 外食 / サービス品質 / テキストアナリティクス / データサイエンス / 機械学習 / サービス / 異常検知 / クチコミデータ / 市場規模推計 / スクリーニング実験 / 多変量管理図 / ベイズ統計学 / 半導体製造 / 自己相関 / 時系列モデル / 調節限界 / 工程調節 / 工程能力指数 / 管理特性 / 統計的制御 / 工程能力 … More Except Principal Investigator 統計的データ解析 / 品質管理 / ケアプラン / 高齢者介護 / ヘルスケア Less

Quality Control for Big Data Environment through Industry-Academia CollaborationPrincipal Investigator
- Principal Investigator
  
  Kawamura Hironobu
- Project Period (FY)
  2017 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Nagoya Institute of Technology
Statistical process control for semiconductor processPrincipal Investigator
- Principal Investigator
  
  Kawamura Hironobu
- Project Period (FY)
  2013 – 2016
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Nagoya Institute of Technology
  University of Tsukuba
Assisting Care Plan Design Based on Statistical Data Analysis
- Principal Investigator
  
  SUZUKI Tomomichi
- Project Period (FY)
  2011 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Tokyo University of Science
Statistical Process Control for Autocorrelated ProcessesPrincipal Investigator
- Principal Investigator
  
  KAWAMURA Hironobu
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Social systems engineering/Safety system
- Research Institution
  Tokyo University of Science

All 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 Other

All Journal Article Presentation Book

[Book] 工場・製造プロセスへのＩｏＴ・ＡＩ導入と活用の仕方2020
- Author(s)
  川村大伸　他
- Total Pages
  605
- Publisher
  技術情報協会
- ISBN
  4861047919
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] A Performance Comparison of Combinations of 2-level Supersaturated Designs and Analysis Methods2021
- Author(s)
  Dongyuan Liu, Kyohei Funahashi, Hironobu Kawamura
- Journal Title
  
  Total Quality Science
  
  Volume: 6 Issue: 1 Pages: 20-33
- DOI
  10.17929/tqs.6.20
- NAID
  130007978174
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] MARKET SIZE FORECASTING OF FOOD-SERVICE INDUSTRIES IN JAPAN2020
- Author(s)
  Yukari Ueki, Hironobu Kawamura
- Journal Title
  
  INTERNATIONAL JOURNAL OF BUSINESS RESEARCH
  
  Volume: 20 Pages: 5-16
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] <b>Control Charts Based on Hierarchical Bayesian Modeling</b>2020
- Author(s)
  Seiya Kadoishi, Hironobu Kawamura
- Journal Title
  
  Total Quality Science
  
  Volume: 5 Issue: 2 Pages: 72-80
- DOI
  10.17929/tqs.5.72
- NAID
  130007790902
- ISSN
  2189-3195
- Year and Date
  2020-01-25
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Establishment of SQC Including Machining Learning Based on Data Science2020
- Author(s)
  川村大伸
- Journal Title
  
  Journal of The Japanese Society for Quality Control
  
  Volume: 50 Issue: 2 Pages: 111-114
- DOI
  10.20684/quality.50.2_111
- NAID
  130007882050
- ISSN
  0386-8230, 2432-1044
- Year and Date
  2020-04-15
- Language
  Japanese
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Service quality evaluation of technical visits for foreign visitors2019
- Author(s)
  Kentaro Ito, Hironobu Kawamura
- Journal Title
  
  Journal of Global Tourism Research
  
  Volume: 4 Issue: 2 Pages: 91-98
- DOI
  10.37020/jgtr.4.2_91
- NAID
  130007789702
- ISSN
  2189-9274, 2189-9282
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] <b>Quality Control for Private Statistics about the Estimated Scale of the Foodservice Market</b>2019
- Author(s)
  Yukari Ueki, Tomohiro Nakajima, Hironobu Kawamura
- Journal Title
  
  Total Quality Science
  
  Volume: 5 Issue: 1 Pages: 34-44
- DOI
  10.17929/tqs.5.34
- NAID
  130007732056
- ISSN
  2189-3195
- Year and Date
  2019-09-30
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Process Analysis of Machining Process with Various Geometrical Characteristics2019
- Author(s)
  Fumiko Ogawa, Taishi Tamai, Hironobu Kawamura, Ken Nishina
- Journal Title
  
  Total Quality Science
  
  Volume: 4 Pages: 75-82
- NAID
  130007591232
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Proposal for Temperature Settings of Poultry Houses Aiming at Death Reduction2019
- Author(s)
  Seiya Akamatsu, Ken Nishina, Hironobu Kawamura
- Journal Title
  
  Journal of Business and Economics
  
  Volume: 10 Pages: 540-549
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Monitoring and diagnosis of causal relationships among variables2018
- Author(s)
  Nishina, K., Kawamura, H. Okamoto, K. and Ishii, N.
- Journal Title
  
  Frontiers in Statistical Quality Control
  
  Volume: １２ Pages: 175-184
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Experiment method for Readjustment of Tolerance2018
- Author(s)
  Fumiko Ogawa, Hironobu Kawamura, Ken Nishina
- Journal Title
  
  Proceedings of ANQ Congress 2018
  
  Volume: ー
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Proposal for Temperature Settings of Poultry House2018
- Author(s)
  Seiya Akamatsu, Ken Nishina, Hironobu Kawamura
- Journal Title
  
  Proceedings of ANQ Congress 2018
  
  Volume: ー
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Analysis of two-level supersaturated designs using the Modified Box-Meyer method2018
- Author(s)
  Kyohei Funahashi, Hironobu Kawamura
- Journal Title
  
  Total Quality Science
  
  Volume: 4 Pages: 34-40
- NAID
  130007496257
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] ものづくりにおける統計学を用いた品質管理（特集：高効率成形の実現に向けて）2018
- Author(s)
  川村大伸
- Journal Title
  
  日本プラスチック工業連盟誌プラスチックス
  
  Volume: 69 Pages: 1-4
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Control Charts Based on Hierarchical Bayesian Modeling2018
- Author(s)
  Seiya Kadoishi, Hironobu Kawamura
- Journal Title
  
  Proceedings of ANQ Congress 2018
  
  Volume: ー
- NAID
  130007790902
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Quality Control of Private Statistics in the Estimated Scale of Food Service Markets2018
- Author(s)
  Yukari Ueki, Tomohiro Nakajima, Hironobu Kawamura
- Journal Title
  
  Proceedings of ANQ Congress 2018
  
  Volume: ー
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Case Study on Process Analysis of Parts Processing with Various Geometric Characteristics2017
- Author(s)
  Taishi Tamai, Fumiko Ogawa, Ken Nishina and Hironobu Kawamura
- Journal Title
  
  Proceedings of the fourteenth ANQ Congress
  
  Volume: １ Pages: 1-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Modified Box-Meyer Method for Two-level Supersaturated Designs2017
- Author(s)
  Kyohei Funahashi and Hironobu Kawamura
- Journal Title
  
  Proceeding of the fourteenth ANQ Congress
  
  Volume: １ Pages: 1-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Proposal for Evaluation Method of Geometrical Product Specification to Improve the Manufacturing Process Capability2017
- Author(s)
  Fumiko Ogawa, Taishi Tamai, Ken Nishina and Hironobu Kawamura
- Journal Title
  
  Proceedings of the fourteenth ANQ Congress
  
  Volume: １ Pages: 1-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Proposal of Robust Control Chart for Phase I2017
- Author(s)
  Shun Yonezawa, Hironobu Kawamura
- Journal Title
  
  Proceedings of the fourteenth ANQ Congress
  
  Volume: １ Pages: 1-7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Technical visits and industrial tourism:A case study of AVEX Inc.2017
- Author(s)
  Kentaro Ito, Hironobu Kawamura, Miwa Kato
- Journal Title
  
  Journal of Global Tourism Research
  
  Volume: ２ Pages: 45-52
- NAID
  130007791083
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K01253
[Journal Article] Multifaceted Evaluation of 2-Level Supersaturated Designs2016
- Author(s)
  Tomohiro Nakajima, Hironobu Kawamura
- Journal Title
  
  Total Quality Science
  
  Volume: 2 Pages: 48-59
- NAID
  130005167411
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-25750120
[Journal Article] A Xbar-chart Using the Bayesian Method for Monitoring High-Mix Low-Volume Production2015
- Author(s)
  Yasunari Tsuruoka, Hironobu Kawamura
- Journal Title
  
  Proceedings of the thirteenth ANQ Congress
  
  Volume: 13 Pages: 1-14
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25750120
[Journal Article] Multifaced Evaluation of Supersaturared Designs2015
- Author(s)
  Tomohiro Nakajima, Hironobu Kawamura
- Journal Title
  
  Proceedings of the thirteenth ANQ Congress
  
  Volume: 13 Pages: 1-12
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25750120
[Journal Article] 半導体製造におけるプロセス管理2014
- Author(s)
  川村大伸
- Journal Title
  
  品質
  
  Volume: 44 Pages: 276-279
- NAID
  110009833197
- Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25750120
[Journal Article] 半導体製造工程におけるT2-Q管理図の実践 : 変動の大きさの管理から変動パターンの管理へ”2014
- Author(s)
  東出政信，仁科健，川村大伸
- Journal Title
  
  品質
  
  Volume: 44 Pages: 341-350
- NAID
  110009833208
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25750120
[Journal Article] Factor assignment based on linear-by-linear interaction for a three-level supersaturated design2013
- Author(s)
  Hironobu Kawamura, Kohei Takada, Masayuki Furukawa, Tomomichi Suzuki
- Journal Title
  
  International Journal of Services Operations and Informatics
  
  Volume: 7 Issue: 2/3 Pages: 245-256
- DOI
  10.1504/ijsoi.2012.051405
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Application of Q Carts for Short-Run Autocorrelated Data2013
- Author(s)
  Hironobu Kawamura, Ken Nishina, Masanobu Higashide, Tomomichi Suzuki
- Journal Title
  
  International Journal of Innovative Computing, Information and Control
  
  Volume: 9 Pages: 3667-3676
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Application of Q Charts for Short-Run Autocorrelated Data2013
- Author(s)
  Kawamura，H．，Nishina，K．，Higashide，M．and Suzuki，T．
- Journal Title
  
  International Journal of Innovative Computing, Information and Control
  
  Volume: 9 Pages: 3667-3676
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25750120
[Journal Article] Grasping Urban Heat Island Using Geographical Temperature Distribution for the Whole Year2013
- Author(s)
  Shuhei Ohta, Hironobu Kawamura, Natsuki Sano, Hitoshi Yokoyama, Haruo Ando, and Tomomichi Suzuki
- Journal Title
  
  Proc. 11th ANQ Congress
  
  Volume: 11
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Grasping Urban Heat Island Using Geographical Temperature Distribution for the Whole Year2013
- Author(s)
  Ryosuke Ikeda, Hironobu Kawamura, Natsuki Sano, Akira Kotani, Yuzuru Hayashi, and Tomomichi Suzuki
- Journal Title
  
  Proc. 11th ANQ Congress
  
  Volume: 11
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Viewpoints to characterize precision evaluation methods in binary measurements2013
- Author(s)
  Tomomichi Suzuki, Yusuke Tsutsumi, Hironobu Kawamura
- Journal Title
  
  Measurement
  
  Volume: 46 Issue: 9 Pages: 3710-3714
- DOI
  10.1016/j.measurement.2013.05.032
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186, KAKENHI-PROJECT-25280009
[Journal Article] Constrained Bounded Adjustment Scheme2012
- Author(s)
  Kawamura，H．，Horii， K．and Suzuki，T．
- Journal Title
  
  Proceedings of the 10th ANQ Congress
  
  Volume: 10 Pages: 675-679
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Recent Developments in Precision Evaluation in Non-Quantitative Measurements2012
- Author(s)
  Tomomichi Suzuki, Yusuke Tsutsumi, Ryosuke Hamaguchi, Hironobu Kawamura
- Journal Title
  
  Proceedings of XX IMEKO World Congress
  
  Volume: 20
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Control characteristics: a case study on semiconductor manufacturing2012
- Author(s)
  Hironobu Kawamura, Ken Nishina, Masanobu Higashide, Tomomichi Suzuki
- Journal Title
  
  Asian Journal on Quality
  
  Volume: 13 Pages: 37-52
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] 文献介紹「Automated Process Adjustments of Chip Cutting Operations using Neural Network and Statistical Approaches」2012
- Author(s)
  川村大伸
- Journal Title
  
  品質
  
  Volume: 42巻 Pages: 59-59
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Process Adjustment Control Chart for Simultaneous Monitoring of Process Capability and State of Statistical Control2012
- Author(s)
  Hironobu Kawamura, Ken Nishina, and Tomomichi Suzuki
- Journal Title
  
  Frontiers in Statistical Quality Control
  
  Volume: 10 Pages: 121-130
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Control Characteristics : a case study on semiconductor manufacturing2012
- Author(s)
  Kawamura, H., Nishina, K., Higashide, M. and Suzuki, T
- Journal Title
  
  Asian Journal on Quality
  
  Volume: (accepted for publication)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Process Adjustment Control Chart for Simultaneous Monitoring of Process Capability and State of Statistical Control2012
- Author(s)
  Hironobu Kawamura
- Journal Title
  
  Frontiers in Statistical Quality Control
  
  Volume: VOL.12
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] The Estimatiion of Comparing the Minimum Detectable Value for Poisson Distributed Measurements2012
- Author(s)
  Oikawa, T．，Tsutsumi，Y．，Kawamura，H．and Suzuki，T．
- Journal Title
  
  Proceedings of the 10th ANQ Congress
  
  Volume: 10 Pages: 589-594
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Process Adjustment Control Chart for Simultaneous Monitoring of Process Capability and State of Statistical Control2012
- Author(s)
  Kawamura, H., Nishina, K. and Suzuki, T
- Journal Title
  
  Frontiers in Statistical Quality Control
  
  Volume: Vol.10(accepted for publication)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] A Note on Application of Measurement Precision for Binary Data2012
- Author(s)
  Ryosuke Hamaguchi, Yusuke Tsutsumi, Hironobu Kawamura, Tomomichi Suzuki
- Journal Title
  
  Proceedings of XX IMEKO World Congress
  
  Volume: 20
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Control Characteristics : a case study on semiconductor manufacturing2012
- Author(s)
  Hironobu Kawamura
- Journal Title
  
  Asian Journal on Quality
  
  Volume: VOL.13
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Capability of Detection for Poisson Distributed Measurements by Normal Approximatio2012
- Author(s)
  Yusuke Tsutsumi, Hironobu Kawamura, and Tomomichi Suzuki
- Journal Title
  
  Frontiers in Statistical Quality Control
  
  Volume: 10 Pages: 361-370
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Spatiotemporal Interpolation of Temperature Data in Tokyo2012
- Author(s)
  Nigorikawa, T．，Suzuki，T．and Kawamura，H．
- Journal Title
  
  Proceedings of the 10th ANQ Congress
  
  Volume: 10 Pages: 595-600
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] 文献紹介「Automated Process Adjustments of Chip Cutting Operations using Neural Network and Statistical Approaches」2012
- Author(s)
  川村大伸
- Journal Title
  
  品質
  
  Volume: Vol.42, No.1 Pages: 59-59
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] The Relationship between Academic Achievement and Ability of the Experiment2012
- Author(s)
  Horiguchi，A．，Suzuki，T．，Kawamura，H．，Kotani，A．and Hayashi，Y．
- Journal Title
  
  Proceedings of the 10th ANQ Congress
  
  Volume: 10 Pages: 692-698
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Proposal of Advanced Taguchi's Linear Graphs for Split-Plot Experiments2012
- Author(s)
  Tomomichi Suzuki, Hironobu Kawamura, Seiichi Yasui, and Yoshikazu Ojima
- Journal Title
  
  Frontiers in Statistical Quality Control
  
  Volume: 10 Pages: 339-348
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Detection of outliers in Meteorological Observation Data2011
- Author(s)
  Gendai Takahashi, Tomomichi Suzuki, Hironobu Kawamura
- Journal Title
  
  Journal of Quality
  
  Volume: 18 Pages: 393-405
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Application of Q charts for Short Run Autocorrelated Data2011
- Author(s)
  Kawamura，H．， Nishina，K．， Higashide，M．and Suzuki，T．
- Journal Title
  
  Proceedings of 2011 Asian Conference of Management Science & Applications
  
  Volume: - Pages: 1086-1092
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Application of Q charts for Short Run Autocorrelated Data2011
- Author(s)
  Kawamura, H., Nishina, K., Higashide, M. and Suzuki, T
- Journal Title
  
  Proceedings of 2011 Asian Conference of Management Science & Applications
  
  Pages: 1086-1092
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Application of Q charts for Short Run Autocorrelated Data2011
- Author(s)
  Hironobu Kawamura
- Journal Title
  
  Proceedings of 2011 Asian Conference of Management Science & Applications
  
  Volume: VOL.1 Pages: 1086-1092
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Factor Assignment for Three-Level Supersaturated Design2011
- Author(s)
  Hironobu Kawamura
- Journal Title
  
  Proceedings of the IIE Asian Conference 2011
  
  Volume: VOL.1 Pages: 507-513
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Factor Assignment for Three-Level Supersaturated Design2011
- Author(s)
  Kawamura, H., Takada, K. and Suzuki, T
- Journal Title
  
  Proceedings of the IIE Asian Conference
  
  Pages: 507-513
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] 文献紹介「The Change Point Mode1 : SPC Method for Short Run Autocorrelated Data」2011
- Author(s)
  川村大伸
- Journal Title
  
  品質
  
  Volume: vol.41 Pages: 43-43
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] 文献紹介「The Change Point Model : SPC Method for Short Run Autocorrelated Data」2011
- Author(s)
  川村大伸
- Journal Title
  
  品質
  
  Volume: Vol.41, No.1 Pages: 43-43
- Data Source
  KAKENHI-PROJECT-22710151
[Journal Article] Factor Assignment for Three-Level Supersaturated Design2011
- Author(s)
  Hironobu KAWAMURA, Kohei TAKADA, Tomomichi SUZUKI
- Journal Title
  
  Proceedings of the IIE Asian 2011 Conference
  
  Volume: - Pages: 507-513
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Grasping Daily Activities of Elderly to Assist Designing Care Plans2011
- Author(s)
  Arase, K．，Suzuki，T．and Kawamura，H．
- Journal Title
  
  Proceedings of the 9th ANQ Congress
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23510186
[Journal Article] Determination of adjustment timing based on process capability2010
- Author(s)
  Hironobu Kawamura
- Journal Title
  
  Proceedings of The Xth International Workshop on Intelligent Statistical Quality Control
  
  Volume: VoL.1 Pages: 231-240
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22710151
[Presentation] 車載部品の多変量需要予測を用いた在庫管理2021
- Author(s)
  福井祐介，川村大伸
- Organizer
  日本経営工学会 2021年春季大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 予知保全のためのセンサーデータを用いた異常検知2021
- Author(s)
  太田響喜，川村大伸
- Organizer
  日本品質管理学会第125回研究発表会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 幾何特性の工程能力指数を算出するための各種の方法の比較2020
- Author(s)
  小川文子，川村大伸，仁科健
- Organizer
  日本品質管理学会第50回年次大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] サイズの大きい2水準過飽和計画における計算負荷を低減した解析2020
- Author(s)
  劉冬媛，川村大伸
- Organizer
  日本品質管理学会第50回年次大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] Customer Evaluation Extraction in Japanese Foodservice Industry Using Topic Model Analysis of eWOM2020
- Author(s)
  Yuki Kato, Hironobu Kawamura
- Organizer
  NSET 2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 多品種少量生産における多変量階層ベイズ管理図2020
- Author(s)
  後藤康太，川村大伸
- Organizer
  日本品質管理学会第50回年次大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] Practical Designs and Analysis Methods in Screening Experiments2019
- Author(s)
  Dongyuan Liu, Kyouhei Funahashi, Hironobu Kawamura
- Organizer
  ANQ Congress 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] Process Adjustment and Monitoring in the Gear Grinding Process2019
- Author(s)
  Kota Goto, Hironobu Kawamura, Fumiko Ogawa
- Organizer
  ANQ Congress 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 外食産業における市場規模推計法の国際比較2019
- Author(s)
  植木裕佳里，川村大伸
- Organizer
  経営情報学会2019年秋季全国研究発表大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 歯車研削加工工程における工程調節とモニタリング2019
- Author(s)
  後藤康太，川村大伸，小川文子
- Organizer
  日本品質管理学会第120回研究発表会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 学からの発信－IoT×AI時代における統計的品質管理手法の展開ー2019
- Author(s)
  川村大伸
- Organizer
  日本品質管理学会第139回講演会
- Invited
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 現場の人間を活かしたデータ解析マネジメント2019
- Author(s)
  川村大伸
- Organizer
  合同技術説明会 (三菱UFJ銀行)
- Invited
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 中部支部産学連携研究会の活動報告2019
- Author(s)
  川村大伸
- Organizer
  日本品質管理学会第139回講演会
- Invited
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 中小企業との産学連携成功体験～データに基づくものづくりからサービスまで～2019
- Author(s)
  川村大伸
- Organizer
  「自動車プラスワン」を目指す！中堅・中小企業応援セミナー
- Invited
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 大学で学ぶ生産管理と品質管理の企業課題との接点2019
- Author(s)
  川村大伸
- Organizer
  秋田県立大学開学20周年記念特別講義
- Invited
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] Hierarchical Bayesian Control Charts Based on Spatial Autoregressive Model2019
- Author(s)
  Seiya Kadoishi, Hironobu Kawamura
- Organizer
  ANQ Congress 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 愛知県高齢者における運転免許返納の要因分析2018
- Author(s)
  安藤瑛，川村大伸
- Organizer
  日本品質管理学会第117回研究発表会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] Service quality evaluation of technical visit for foreign visitors: A case study of AVEX Inc.2018
- Author(s)
  Kentaro Ito, Hironobu Kawamura
- Organizer
  The 5th International Workshop on Production and Logistics
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 品質管理の勘所2018
- Author(s)
  川村大伸
- Organizer
  産学連携研究交流会
- Invited
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 機械加工における幾何特性の評価指標の提案と工程改善事例2018
- Author(s)
  小川文子，玉井大嗣，川村大伸，仁科健
- Organizer
  日本品質管理学会第116回研究発表会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] JF年鑑における欠測値の補完2018
- Author(s)
  植木裕佳里，川村大伸
- Organizer
  日本品質管理学会第116回研究発表会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] スクリーニング実験における解析手法の性能比較2018
- Author(s)
  舟橋京平，川村大伸
- Organizer
  日本品質管理学会第48回年次大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 外食産業における基礎データの収集と整理2018
- Author(s)
  加藤友希，川村大伸
- Organizer
  日本経営工学会春季大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 2水準過飽和計画における改良版ボックス・メイヤーメソッド2017
- Author(s)
  舟橋京平，川村大伸
- Organizer
  日本品質管理学会第113回研究発表会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 外国人向けテクニカルビジットのサービス品質評価2017
- Author(s)
  伊藤健太郎，川村大伸
- Organizer
  日本経営工学会春季大会
- Data Source
  KAKENHI-PROJECT-17K01253
[Presentation] 多品種少量生産に対するベイズQ管理図2016
- Author(s)
  鶴岡靖成，川村大伸
- Organizer
  日本品質管理学会第46回年次大会
- Place of Presentation
  名古屋工業大学
- Data Source
  KAKENHI-PROJECT-25750120
[Presentation] ウエーハ内変動パターンに同期したCMP装置異常の検出2016
- Author(s)
  東出政信，仁科健，川村大伸，杉浦遼太
- Organizer
  精密工学会
- Place of Presentation
  名古屋大学
- Invited
- Data Source
  KAKENHI-PROJECT-25750120
[Presentation] The Detection of Process Variation Synchronous within Wafer Variation Pattern2015
- Author(s)
  Masanobu HIGASHIDE, Ken NISHINA, Hironobu KAWAMURA, Ryota SUGIURA
- Organizer
  AEC/APC Symposium Asia 2015
- Place of Presentation
  学術総合センター
- Year and Date
  2015-11-11
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25750120
[Presentation] 多品種少量生産用の管理図2013
- Author(s)
  川村大伸，仁科健，東出政信
- Organizer
  第5回横幹連合コンファレンス
- Place of Presentation
  香川大学
- Data Source
  KAKENHI-PROJECT-25750120
[Presentation] 調節限界を用いた統計的制御に関する研究2011
- Author(s)
  堀井一石, 鈴木知道, 川村大伸
- Organizer
  日本品質管理学会第96回研究発表会
- Place of Presentation
  名古屋工業大学
- Year and Date
  2011-08-11
- Data Source
  KAKENHI-PROJECT-22710151
[Presentation] 工程能力と統計的管理状態の同時モニタリング工程調節用管理図2010
- Author(s)
  川村大伸
- Organizer
  日本経営工学会
- Place of Presentation
  福岡工業大学(福岡県)
- Year and Date
  2010-10-23
- Data Source
  KAKENHI-PROJECT-22710151
[Presentation] 工程能力と統計的管理状態の同時モニタリング工程調節用管理図2010
- Author(s)
  川村大伸, 仁科健, 鈴木知道
- Organizer
  日本経営工学会平成22年度秋季研究大会
- Place of Presentation
  福岡工業大学
- Year and Date
  2010-10-24
- Data Source
  KAKENHI-PROJECT-22710151
[Presentation] 使える管理図にするにはどうするか?-統計的管理状態の拡張-2010
- Author(s)
  川村大伸, 仁科健, 鈴木知道
- Organizer
  クオリティフォーラム2010
- Place of Presentation
  日本教育会館
- Year and Date
  2010-11-12
- Data Source
  KAKENHI-PROJECT-22710151
[Presentation] 高齢者介護における高齢者の状態とケアの関係性の把握に関する研究
- Author(s)
  石川光之，鈴木知道，川村大伸
- Organizer
  日本品質管理学会　第42回年次大会研究発表会
- Place of Presentation
  石川県小松市
- Data Source
  KAKENHI-PROJECT-23510186

1. SUZUKI Tomomichi (50251369)

# of Collaborated Projects: 1 results

# of Collaborated Products: 20 results

Kawamura Hironobu 川村 大伸

KAWAMURA Hironobu 川村 大伸

Research Projects

Research Products

Co-Researchers

Quality Control for Big Data Environment through Industry-Academia CollaborationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Statistical process control for semiconductor processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Assisting Care Plan Design Based on Statistical Data Analysis

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Statistical Process Control for Autocorrelated ProcessesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 工場・製造プロセスへの ＩｏＴ・ＡＩ導入と活用の仕方2020

Author(s)

Total Pages

Publisher

ISBN

Data Source

[Journal Article] A Performance Comparison of Combinations of 2-level Supersaturated Designs and Analysis Methods2021

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] MARKET SIZE FORECASTING OF FOOD-SERVICE INDUSTRIES IN JAPAN2020

Author(s)

Journal Title

Data Source

[Journal Article] <b>Control Charts Based on Hierarchical Bayesian Modeling</b>2020

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Establishment of SQC Including Machining Learning Based on Data Science2020

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

[Journal Article] Service quality evaluation of technical visits for foreign visitors2019

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] <b>Quality Control for Private Statistics about the Estimated Scale of the Foodservice Market</b>2019

Author(s)

Journal Title

DOI

NAID

ISSN

Year and Date

Language

Data Source

Kawamura Hironobu 川村大伸

KAWAMURA Hironobu 川村大伸

[Book] 工場・製造プロセスへのＩｏＴ・ＡＩ導入と活用の仕方2020