Kamiya Osamu 神谷修

… Alternative Names

神谷修カミヤオサム

KAMIYA Osamu 神谷修

Less

Researcher Number	60113891
Other IDs
External Links
Affiliation (Current)	2025: 秋田大学, 名誉教授, 名誉教授
Affiliation (based on the past Project Information) *help	2022 – 2023: 秋田大学, 名誉教授, 名誉教授 2021: 秋田大学, 理工学研究科, 名誉教授 2020: 秋田大学, 名誉教授, 名誉教授 2016 – 2018: 秋田大学, 理工学研究科, 教授 2011 – 2013: 秋田大学, 工学(系)研究科(研究院), 教授 … More 2012: 秋田大学, 大学院・工学資源学研究科, 教授 2002 – 2007: 秋田大学, 工学資源学部, 教授 1999 – 2000: 秋田大学, 工学資源学部, 教授 1995 – 1996: 秋田大学, 鉱山学部, 助教授 Less
Review Section/Research Field	Principal Investigator Basic Section 26050:Material processing and microstructure control-related / Material processing/Microstructural control engineering / Environmental technology/Environmental materials / Material processing/treatments / Materials/Mechanics of materials / Production engineering/Processing studies Except Principal Investigator 電力工学・電気機器工学 / 資源開発工学 / Structural/Functional materials
Keywords	Principal Investigator 固定砥粒 / ウルツ鉱 / ダイヤモンド基板加工 / ダイヤモンド砥粒 / 固定砥粒型ソーワイヤ / ソーワイヤ / 硬質砥粒 / MIC / 合成ダイヤモンド / ろう接 … More / 硼素炭素窒素 / ダイヤモンドの切削加工 / 切削速度上昇 / 長寿命ソーワイヤ / 形状制御加工 / ダイヤモンド単結晶の加工 / ダイヤモンド窒化ボロン複合砥粒 / 窒化ボロン砥粒 / ダイヤモンド基板切削加工 / 爆発合成 / ダイヤモンド除去率 / ダイヤモンド摩耗機構 / 多結晶ダイヤモンド砥粒 / 窒化ケイ素 / 切削機構 / コンクリート掘削 / 超硬質材 / 爆発合成法 / 固定砥粒型工具 / 燃焼炎合成法ダイヤモンド / 多結晶ダイヤモンド / 六方晶型窒化ホウ素 / 精密・特殊加工プロセス / 均質ワイヤ製造 / ダイヤモンドの切断加工 / 大気と真空をつなぐ / 連続製造法 / 極細固定砥粒ソーワイヤ / ダイヤモンドの加工 / 窒化ホウ素 / 六方晶 / 極細ソーワイヤ / 窒化ホウ素砥粒 / ろう付け / 精密加工 / ダイヤモンド / Neutralizing action / Ammonia generation bacterium / Acid Drainage / Microbe / Soil / Valorization / Environmental pollution / Environment Technology / 農業肥料 / リン酸 / チュニジア / 土壤圏現象 / 中和作用 / アンモニア生成細菌 / 酸性排水 / 微生物 / 土壌圏現象 / 国際貢献 / 公害防止・対策 / 環境技術 / Metal Microstructure / Micro Machining / Thiobacillus-ferrooxidans / Iron Oxidation Bacteria / Bacteria Processing / Microbiologically Corrosion / 腐食 / 加工 / バクテリア / 金属組織 / マイクロマシニング / チオバチルスフェロオキシダンス / 鉄酸化細菌 / 微生物加工 / 微生物腐食 / Surface Roughness / Joining / Molybdenum / Chemical Vapor Deposition / Acetylene Flame / Combustion Flame Synthesizing / Synthesized Diamond / CVD法 / 燃焼炎法 / アセチレン / ステンレス鋼 / モリブデン / 表面あらさ / 接合 / モリブデン基板 / 化学気相合成法 / アセチンレ炎 / 燃焼炎合成法 / ダイヤモンド合成 / 切断加工 / 固定砥粒型 / ジェット流 / ハイブリッド / ダイヤモンド形状 / 超音波 / ジェット水流 / 放電加工 / ハイブリッド加工 / 金属ろう材 / ダイヤモンドソーワイヤ … More Except Principal Investigator Pseudomonas / Electrokinetic phenomenon / Natural Zeolite / Removing Pollutants / 天然ゼオライト / 重金属回収 / 土壌汚染 / ゼオライト / 動電現象 / 汚染土壌 / Bacteria / Soil remediation / Oil contaminated soil / Tower mill / Bioremediation / Dioxins / Polychlorinated compound / 選鉱学的土壌浄化 / ダイオキシン類分解 / 土壌汚染処理 / 有機塩素系汚染 / 油汚染 / Shewanella sp. / Gammaproteobacteria網 / Psudomonasu sp. / ダイオキシン類 / バクテリア / 土壌浄化 / 油汚染土壌 / タワーミル / バイオレメディエーション / ダイオキシン / 有機塩素化合物 / ＩＳＯ　22196 / ＪＩＳ　Ｚ２８０１ / ISO　22196 / JIS　Z　2801 / 薄膜 / バイオフィルム / ISO 22196 / JIS Z 2801 / フィルム密着 / 銅 / 抗菌性金属 / 抗菌 Less

Explosive synthesis of composite hexagonal ultrahard abrasive grains composed of boron, carbon, and nitrogen and its application to cuttingPrincipal Investigator
- Principal Investigator
  
  Kamiya Osamu
- Project Period (FY)
  2020 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Akita University
Precision Machining of Diamond Plate by Saw Wire Fixed Grain of Wurtzite type Boron NitridePrincipal Investigator
- Principal Investigator
  
  Kamiya Osamu
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Akita University
Hybrid Machining by Micro Saw Wire Bonded with Diamond Grains using Metal SolderPrincipal Investigator
- Principal Investigator
  
  KAMIYA Osamu
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Akita University
Research for the generation of antibacterial effect of metal and bacterial ability of its surface based on a newly developed bioassay
- Principal Investigator
  
  MIYANO Yasuyuki
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Akita University
Environmental friendly remediation and recycling method for contaminated soil by combination of Bioleaching and BioremediationPrincipal Investigator
- Principal Investigator
  
  KAMIYA Osamu
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Environmental technology/Environmental materials
- Research Institution
  Akita University
Research on remediation of contaminated soil using electroconductive zeolite electrode and electrokinetic phenomenon
- Principal Investigator
  
  YOSHIMURA Noboru
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  電力工学・電気機器工学
- Research Institution
  AKITA UNIVERSITY
BIOREMEDIATION OF SOIL CONTAMINATED BY OIL AND DIOXINS
- Principal Investigator
  
  FUJITA Toyohisa
- Project Period (FY)
  2002 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  資源開発工学
- Research Institution
  The University of Tokyo
  Akita University
Micro Machining by an Element Selective Corrosion Action of Thiobacillus Genus BacteriumPrincipal Investigator
- Principal Investigator
  
  KAMIYA Osamu
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Akita University
Combustion Flame Synthesizing of Diamond Film and Joining on Metal SurfacePrincipal Investigator
- Principal Investigator
  
  KAMIYA Osamu
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Akita University

[Journal Article] Development of Reinforced Concrete Dismantling System Using Steam Pressure Cracking Agent SPC2024
- Author(s)
  長尾晃太, 御代田竜也, 水間宏行, 中津雅延, 岩間祐一, 鹿住孝, 七尾純平, 伊藤慎一, 髙橋護, 宮野泰征, 村田健司, 神谷修
- Journal Title
  
  Journal of the Society of Materials Engineering for Resources of Japan
  
  Volume: 34 Issue: 1 Pages: 20-28
- DOI
  10.5188/sjsmerj.662
- ISSN
  2433-0507, 2433-9385
- Year and Date
  2024-05-20
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Influence of Diamond Seed Attachment Processing on Diamond Films Synthesized on Tungsten Carbide Substrate by Flame Combustion2023
- Author(s)
  Mamoru Takahashi, Osamu Kamiya
- Journal Title
  
  Journal of Materials and Applications
  
  Volume: 12 Issue: 1 Pages: 11-20
- DOI
  10.32732/jma.2023.12.1.11
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Dismantling of Reinforced Concrete Using Steam Pressure Cracking System: Drilling and Crack Propagation2023
- Author(s)
  Osamu Kamiya, Mamoru Takahashi, Yasuyuki Miyano, Shinichi Ito, Kenji Murata, Makoto Kawano, Arata Maisawa, Jumpei Nanao, Takashi Kazumi, Masanobu Nakatsu, Hiroyuki Mizuma, Tatsuya Miyota, Kota Nagao and Yuichi Iwama
- Journal Title
  
  Materials
  
  Volume: 16 Issue: 4 Pages: 1398-1415
- DOI
  10.3390/ma16041398
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Cutting of Diamond Substrate Using Fixed Diamond Grain Saw Wire2022
- Author(s)
  Osamu Kamiya, Mamoru Takahashi, Yasuyuki Miyano, Shinichi Ito, Masanobu Nakatsu, Hiroyuki Mizuma, Yuichi Iwama, Kenji Murata, Junpei Nanao, Makoto Kawano, Arata Maisawa and Takashi Kazumi
- Journal Title
  
  Materials
  
  Volume: 15 Issue: 16 Pages: 5524-5535
- DOI
  10.3390/ma15165524
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Elastic Wave Property of Concrete Decomposed by Steam Pressure Cracking Agent2022
- Author(s)
  Osamu KAMIYA, Etsushi OKUYAMA, Mamoru TAKAHASHI, Yasuyuki MIYANO, Shinichi Ito, Kenji MURATA, Junpei NANAO, Arata MAISAWA, Makoto KAWANO, Takashi KAZUMI, Masanobu NAKATSU, Hiroyuki MIZUMA, Yuichi IWAMA
- Journal Title
  
  Journal of Materials and Applications
  
  Volume: 11(1)
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Influence of substrate surface roughness on synthesized diamond films by flame combustion on Ti substrate for dental implant2022
- Author(s)
  Mamoru TAKAHASHI, Tatsuya FUJITA, Takahito YANAGI, Riki SUZUKI, Osamu KAMIYA
- Journal Title
  
  Journal of Materials and Applications
  
  Volume: 11(1) Issue: 1 Pages: 17-26
- DOI
  10.32732/jma.2022.11.1.17
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Demolition of Reinforced Concrete by Steam Pressure Cracking System2022
- Author(s)
  Osamu Kamiya, Mamoru Takahash, Yasuyuki Miyano, Shinichi Ito1, Kenji Murata, Makoto Kawano, Arata Maisawa, Junpei Nanao, Takashi Kazumi, Masanobu Nakatsu, Hiroyuki Mizuma, Yuichi Iwama
- Journal Title
  
  Journal of Materials and Applications
  
  Volume: 11(1) Issue: 1 Pages: 1-9
- DOI
  10.32732/jma.2022.11.1.1
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Controlled Cracking of Large Size Concrete Structures by a Steam Pressure Cracking Agent2021
- Author(s)
  Osamu Kamiya, Kaito Suzuki, Etsushi Okuyama1, Naoya Kojima, Jyunpei Nanao, Shinichi Ito, Mamoru Takahashi, Yasuyuki Miyano, Kenji Murata, Takashi Kazumi, Arata Maisawa, Masanobu Nakatsu, Hiroyuki Mizuma, Yuichi Iwama
- Journal Title
  
  Journal of Materials and Applications
  
  Volume: 10(1) Issue: 1 Pages: 43-51
- DOI
  10.32732/jma.2021.10.1.43
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] Controlled Cracking for Industrial Concrete Waste by Steam Pressure Cracking Agen2020
- Author(s)
  Osamu KAMIYA, Kaito SUZUKI, Etsushi OKUYAMA, Naoya KOJIMA, Shinichi ITO, Mamoru TAKAHASHI, Kenji MURATA, Takashi KAZUMI, Arata MAISAWA, Masanobu NAKATSU, Hiroyuki MIZUMA, Hiroshi SODEYAMA, Yuichi IWAMA, Nobuyasu FURUUCHI, Keizo SHINYA
- Journal Title
  
  International Journal of the Society of Materials Engineering for Resources
  
  Volume: Vol.24 Pages: 18-22
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K05162
[Journal Article] 燃焼炎法による3段階合成法を用いたダイヤモンド被膜合成に及ぼすダイヤモンド種付け処理の影響2018
- Author(s)
  高橋護、大竹可峻、神谷修
- Journal Title
  
  スマートプロセス学会誌
  
  Volume: Vol.7,No.3 Pages: 113-119
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06791
[Journal Article] Development of fixed grain micro-saw wire and cutting perforamance2017
- Author(s)
  O.Kamiya, H.Mori, M.Ito, M.Takahashi, Y.Miyano, T.Pasang, M.Nkatsu and Y.Iwama
- Journal Title
  
  Procedia Manufacturing
  
  Volume: 13 Pages: 161-168
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06791
[Journal Article] Development of a New Bonded Abrasive Diamond Tool2016
- Author(s)
  Hikari Tanaka, Yuta Shiina, Masanobu Nakatsu and Osamu Kamiya
- Journal Title
  
  International Journal of the Society of Materials Engineering for Resources
  
  Volume: Vol.21 Pages: 11-15
- NAID
  130005877873
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16K06791
[Journal Article] Influence of the cutting condition on cutting performance with fixed abrasive diamond saw wire (ADW)2014
- Author(s)
  Ayuko Saito, Mamoru Takahashi, Yasuyuki Miyano and Osamu Kamiya
- Journal Title
  
  International Journal of the Society of Materials Engineering for Resources
  
  Volume: 未定
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560113
[Journal Article] ダイヤモンド砥粒の接触角度と切断性能に関する基礎的研究2014
- Author(s)
  齊藤亜由子、佐藤達弥、神谷修
- Journal Title
  
  精密工学会誌
  
  Volume: (掲載決定巻号未定)
- Data Source
  KAKENHI-PROJECT-23560113
[Journal Article] ダイヤモンド砥粒の接触角度と切削性能に関する基礎的研究*－砥粒の接触角度変化による溝形状と切り屑排除機構の検証－2014
- Author(s)
  齊藤亜由子，佐藤達弥，神谷修
- Journal Title
  
  精密工学会誌
  
  Volume: 未定
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560113
[Journal Article] 膜厚制御型試料を利用した銅の抗菌性発現最小量評価法の開発2013
- Author(s)
  宮野泰征、本城国明、神谷修、木内正人
- Journal Title
  
  日本銅学会誌「銅と銅合金」
  
  Volume: Vol.51, No.1 Pages: 168-174
- NAID
  40019403040
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760660
[Journal Article] Influence of the Cutting Condition on Cutting Performance with Fixed Abrasive Diamond Saw Wire2012
- Author(s)
  Ayuko Saitou, Mamoru Tkahashi, Yasuyuki Miyano and Osamu Kamiya
- Journal Title
  
  International Journal of the Society of Materials Engineering for Resources
  
  Volume: Vol.20(掲載決定)
- Data Source
  KAKENHI-PROJECT-23560113
[Journal Article] 膜厚制御型試料を利用した銅の抗菌性発現最小量評価法の開発2012
- Author(s)
  宮野泰征、本城国明、神谷修、木内正人
- Journal Title
  
  日本銅学会誌「銅と銅合金」
  
  Volume: 第51巻(2012,Vol.51)
- NAID
  40019403040
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760660
[Journal Article] Soldering Process and Cutting Performance of Micro Saw Wire Bonded With Diamond Grains2012
- Author(s)
  Osamu Kamiya, Yasuyuki Miyano, Mamoru Tkahashi, Yuichi Oga, Zhan Wen Chen and Kenji Funaoka
- Journal Title
  
  International Journal of Modern Physics
  
  Volume: Vo.6 Pages: 491-466
- DOI
  10.1142/s2010194512003662
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23560113
[Journal Article] 農業肥料工業残渣の有効利用と中和処理2008
- Author(s)
  住川大樹、葛野栄一、柴山敦, 宮野泰征、神谷修
- Journal Title
  
  秋田大学ベンチャービジネスラボラトリー平成19年度年報
  
  Pages: 92-97
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] 農業肥料工業残渣の有効利用と中和処理2008
- Author(s)
  住川大樹・葛野栄一・柴山敦・宮野泰征・神谷修
- Journal Title
  
  秋田大学ベンチャービジネスラボラトリー平成19年度年報
  
  Pages: 92-97
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] 農業肥料工業残渣の有効利用と中和処理2008
- Author(s)
  住川大樹、葛野栄一、柴山敦, 宮野泰征、神谷修
- Journal Title
  
  平成19年度秋田大学ベンチャービジネスラボラトリー研究成果発表会
  
  Pages: 109-114
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] 農業肥料工業残渣の有効利用と中和処理2008
- Author(s)
  住川大樹・葛野栄一・柴山敦・宮野泰征・神谷修
- Journal Title
  
  平成19年度秋田大学ベンチャービジネスラボラトリー研究成果発表会
  
  Pages: 109-114
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] Valorization and neutralizing processing of agricultural fertilizer industrial residue2007
- Author(s)
  Daiki Umikawa, Eiichi Kuzuno, Atushi Shibayama, Yasuyuk Miyano and Osmau Kamiya
- Journal Title
  
  Annual report 2007 of Akita University VBL
  
  Pages: 92-97
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] 汚染土壌の浄化と資源リサイクル2007
- Author(s)
  神谷修・柴山敦・葛野栄一・植澤陽一・住川大樹
- Journal Title
  
  秋田大学ベンチャービジネスラボラトリー平成18年度年報
  
  Pages: 89-93
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] Valorization and neutralizing processing of agricultural fertilizer industrial residue.2007
- Author(s)
  Daiki Umikawa, Eiichi Kuzuno, Atushi Shibayama, Yasuyuki Miyano and Osmau Kamiya
- Journal Title
  
  Conference of Akita University VBL in 2007
  
  Pages: 109-114
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] Purification and resource recycling of contaminated soil2006
- Author(s)
  Osamu Kamiya, Atushi Shibayama, Eiichi Kuzuno, Youichi Uesawa and Daiki Sumikawa
- Journal Title
  
  Annual report 2006 of Akita University VBL
  
  Pages: 89-93
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Journal Article] Low Cycle Fatigue Behavior and Surface Feature by Image Processing of Sn-0.7Cu Lead-free Solder2005
- Author(s)
  T.Takahashi, S.Hioki, I.Shohji, O.Kamiya
- Journal Title
  
  Key Engineering Materials 306-308
  
  Pages: 306-308
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] Fundamental Examination of Coaxial Jet Chamber for Protecting against Strong Wind-Study on Fluid Chamber applicable to Gas-Shielded Arc Welding (Report 1)-2005
- Author(s)
  S.Morikawa, O.Kamiya
- Journal Title
  
  Quarterly Journal of the Japan Welding Society Vol.23, No.2
  
  Pages: 230-235
- NAID
  110003423091
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] 環状噴流で形成する防風シールドチャンバーに関する基礎的検討-ガスシールド溶接法に適した流体式シールドチャンバーの研究(第1報)-2005
- Author(s)
  森川茂弘, 神谷修
- Journal Title
  
  溶接学会論文集 23・2
  
  Pages: 230-235
- NAID
  110003423091
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] Low Cycle Fatigue Behavior and Surface Feature by Image Processing of Sn-0.7Cu Lead-free Solder2005
- Author(s)
  Tahehiko Takahashi, Susumu Hioki, Ikuo Shohji, Osamu Kamiya
- Journal Title
  
  Key Engineering Materials Vols.306-308
  
  Pages: 115-120
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] Weldability in High Pressure Nitrogen Atmosphere and Mechanical Property of Weld Metal of Austenitic Stainless Steel2004
- Author(s)
  O.Kamiya
- Journal Title
  
  Electric Furnace Steel Forum Vol.72, No.3
  
  Pages: 253-260
- NAID
  130000255700
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] Weldability in High Pressure Nitrogen Atmosphere and Mechanical Property of Weld Metal of Austenitic Stainless Steel2004
- Author(s)
  O.Kamiya
- Journal Title
  
  Electric Furnace Steel Forum 72・3
  
  Pages: 253-260
- NAID
  130000255700
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] Fundamental Studies on Biomachining of Carbon Steel by Iron Oxidizing Bacteria2003
- Author(s)
  Y.Miyano, O.Kamiya, L.Chouanine, Y.Kikuchi
- Journal Title
  
  Transactions of JWRI 32・1
  
  Pages: 239-242
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] Fundamental Studies on Biomachining of Carbon Steel by Iron Oxidizing Bacteria2003
- Author(s)
  Y.Miyano, O.Kamiya, L.Chouanine, Y.Kikuchi
- Journal Title
  
  Transactions of JWRI, Vol.32, No.1
  
  Pages: 239-242
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360145
[Journal Article] 微生物を用いた汚染土壌の浄化に関する基礎的研究2002
- Author(s)
  呉方芳, 神谷修, 藤田豊久, 大好直
- Journal Title
  
  素材物性学雑誌 15巻、2号
  
  Pages: 59-65
- Data Source
  KAKENHI-PROJECT-14205151
[Journal Article] 微生物を用いた汚染土壌の浄化に関する基礎的研究2002
- Author(s)
  呉方芳, 神谷修, 藤田豊久, 大好直
- Journal Title
  
  素材物性学雑誌 15(2)
  
  Pages: 59-65
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-14205151
[Journal Article] Experimental Study on Bioremediation of Contaminated Soil2002
- Author(s)
  Fangfang Wu, Osamu Kamiya, Toyohisa Fujita, Tadashi Ohyoshi
- Journal Title
  
  J.Soc.Materials Engineering for Resources of Japan Vol.15
  
  Pages: 59-65
- NAID
  110000517704
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14205151
[Presentation] Effect of Diamond Seed Attachment Processing on Synthesis of Diamond Films on Tungsten Carbide Substrate by Flame Combustion2021
- Author(s)
  Mamoru Takahashi, Osamu Kamiya
- Organizer
  The Ninth International Conference on Materials Engineering for Resources
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05162
[Presentation] Cracking of Reinforced Concrete by Steam Pressure Cracking Agent2021
- Author(s)
  Osamu KAMIYA, Mamoru TAKAHASHI, Yasuyuki MIYANO, Shinichi Ito, Kenji MURATA, Makoto KAWANO, Arata MAISAWA, Junpei NANAO, Takashi KAZUMI, Masanobu NAKATSU, Hiroyuki MIZUMA and Yuichi IWAMA
- Organizer
  The Ninth International Conference on Materials Engineering for Resources
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K05162
[Presentation] 硬質素材を加工する極細の固定砥粒型ソーワイヤの開発2018
- Author(s)
  森春樹、高橋基、田中ひかり、村田健司、岩間祐一、神谷修
- Organizer
  日本素材物性学会平成30年度年会講演会
- Data Source
  KAKENHI-PROJECT-16K06791
[Presentation] 硬質素材を加工する極細の固定砥粒型ソーワイヤの開発2018
- Author(s)
  森春樹、高橋基、ムハマドアキルビンカマルディン、田中ひかり、村田健司、岩間祐一、神谷修
- Organizer
  日本素材物性学会
- Data Source
  KAKENHI-PROJECT-16K06791
[Presentation] Development of fixed grain micro-saw wire and cutting perforamance2017
- Author(s)
  O.Kamiya, H.Mori, M.Ito, M.Takahashi, Y.Miyano, T.Pasang, M.Nkatsu and Y.Iwama
- Organizer
  Manufacturing Engineering Society International Conference 2017, Vigo, Spain
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06791
[Presentation] 固定砥粒型ダイヤモンド工具の切断性能に及ぼすダイヤモンド砥粒形状の影響2014
- Author(s)
  齊藤亜由子，佐藤達弥，神谷修
- Organizer
  ２０１４年度精密工学会春季大会学術講演会
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] 固定砥粒型ダイヤモンド工具の切断性能に及ぼすダイヤモンド砥粒形状の影響2014
- Author(s)
  齊藤亜由子、佐藤達弥、神谷修
- Organizer
  2014年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] 金属ろう付固定砥粒型ダイヤモンドソーワイヤを用いた各種金属材料への切断2013
- Author(s)
  齊藤亜由子、佐藤達弥、神谷修
- Organizer
  2013年度精密工学会東北支部学術講演会
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] Resource-Saving Twisted Diamond Saw Wire (ADW) with High-Speed Cutting Performance2013
- Author(s)
  Ayuko Saitou, Mamoru Tkahashi, Yasuyuki Miyano and Osamu Kamiya
- Organizer
  ICMR2013
- Place of Presentation
  Akita City
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] New Bioassay to Evaluate the Minimum Antibacterial Mass of Metallic Copper Using Cu Thin Coating2013
- Author(s)
  Yasuyuki Miyano, Kuniaki Honjo, Osamu Kamiya, Masato Kiuchi
- Organizer
  The 7th International Conference on Materials Engineering for Resources (ICMR2013AKITA)
- Place of Presentation
  秋田ビューホテル
- Year and Date
  2013-11-20
- Data Source
  KAKENHI-PROJECT-23760660
[Presentation] Resource-saving Twisted Diamond Saw Wire (ADW) with High-speed Cutting Performance2013
- Author(s)
  Ayuko Saito, Mamoru Takahashi, Yasuyuki Miyano and Osamu Kamiya
- Organizer
  The Seventh International Conference on　Materials Engineering for Resources
- Place of Presentation
  Akita city, Japan
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] Development of new bioassay for the antibacterial mechanism of metallic copper using Cu thin coating plates2012
- Author(s)
  Yasuyuki Miyano, Kuniaki Honjo, Takashi Chiba, Osamu Kamiya, Masato Kiuchi
- Organizer
  The 8th EU-Japan Joint Symposium on Plasma Processing/JSPP2012
- Place of Presentation
  東大寺カルチャーセンター
- Year and Date
  2012-01-15
- Data Source
  KAKENHI-PROJECT-23760660
[Presentation] Development of new bioassay for the antibacterial mechanism of metallic copper using Cu thin coating plates2012
- Author(s)
  Yasuyuki Miyano, Kuniaki Honjo, Takashi Chiba, Osamu Kamiya, Masato Kiuchi
- Organizer
  The 8th EU-Japan Joint Symposium on Plasma Processing (JSPP2012)
- Place of Presentation
  東大寺カルチャーセンター
- Data Source
  KAKENHI-PROJECT-23760660
[Presentation] 銅薄膜材を使用した銅の抗菌機能に関する基礎的研究2011
- Author(s)
  宮野泰征, 本城国明, 神谷修, 木内正人
- Organizer
  日本銅学会(銅及び銅合金技術研究会)第51回全国大会
- Place of Presentation
  京都テルサ
- Year and Date
  2011-11-16
- Data Source
  KAKENHI-PROJECT-23760660
[Presentation] Soldering Process and Cuting Performance of Micro Saw Wire Bonded With Diamond Grains2011
- Author(s)
  Osamu Kamiya, Yasuyuki Miyano, Mamoru Takahasi, Youichi Oga, Zhan Wen Chen and Kenji Funaoka
- Organizer
  6th Internationa Conference on Adbanced Mterials, Development and Performance
- Place of Presentation
  Tokushima
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] 銅薄膜材を使用した銅の抗菌機能に関する基礎的研究2011
- Author(s)
  宮野泰征, 本城国明, 神谷修, 木内正人
- Organizer
  日本銅学会（銅及び銅合金技術研究会）第51回全国大会
- Place of Presentation
  京都テルサ
- Data Source
  KAKENHI-PROJECT-23760660
[Presentation] Soldering Process and Cutting Performance of Micro Saw Wire Bonded with Diamond Grains2011
- Author(s)
  Osamu Kamiya, Yasuyuki Miyano, Mamoru Takahashi, Yuichi Oga, Zhan When Chen and Kenji Funaoka
- Organizer
  AMDP2011
- Place of Presentation
  徳島大学
- Year and Date
  2011-07-18
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] 膜厚制御型金属表面を適用した新規バイオアッセイによる銅の抗菌機構の解明2011
- Author(s)
  宮野泰征,本城国明,古川壮一,森永康, 荻原博和,神谷修,千葉隆,木内正人
- Organizer
  日本防菌防黴学会第38回年次大会
- Place of Presentation
  千里ライフサイエンスセンター
- Year and Date
  2011-08-24
- Data Source
  KAKENHI-PROJECT-23760660
[Presentation] Valorization processing of agricultural fertilizer industrial residue.2007
- Author(s)
  Daiki Umikawa, Yoich Uezawa, Eiichi Kuzuno, Atushi Shibayama, and Yasuyuki Miyano and Osmau Kamiya
- Organizer
  Conference on Materials Engineering for Resources in 2007
- Year and Date
  2007-06-19
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Presentation] 農業肥料工場より排出された工業残渣の有効利用2007
- Author(s)
  住川大樹・植澤陽一・葛野栄一・柴山敦・宮野泰征・神谷修
- Organizer
  平成19年度日本素材物性学会年次大会
- Place of Presentation
  秋田ビューホテル
- Year and Date
  2007-06-19
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18510068
[Presentation] 金属ろう付け固定砥粒型ダイヤモンドソーワイヤを用いた各種金属材料への切断
- Author(s)
  齊藤亜由子，佐藤達弥，神谷修
- Organizer
  2013年度精密工学会東北支部学術講演会
- Place of Presentation
  秋田県田沢湖町
- Data Source
  KAKENHI-PROJECT-23560113
[Presentation] Soldering Process and Cutting Performance of Micro Saw Wire Bonded With Diamond Grains
- Author(s)
  Osamu Kamiya, Yasuyuki Miyano, Mamoru Tkahashi, Yuichi Oga, Zhan Wen Chen and Kenji Funaoka
- Organizer
  AMDP2011
- Place of Presentation
  徳島大学
- Data Source
  KAKENHI-PROJECT-23560113

1. SHIBAYAMA Atsushi (30323132)

# of Collaborated Projects: 2 results

# of Collaborated Products: 10 results
2. MIYANO Yasuyuki (60466589)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
3. KIUCHI Masato (50356862)

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
4. NOMURA Nobuhiko (60292520)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. FURUKAWA Souichi (40339289)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
6. FUJITA Toyohisa (70124617)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
7. SADAKI Jun (60332582)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. OKAYA Katsunori (80134493)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MATSUO Seiji (20302755)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. YOSHIMURA Noboru (60006674)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. SUZUKI Masafumi (60226553)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. SHOJI Tomoyoshi (70226299)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. MITOBE Kazutaka (60282159)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. HONJO Kuniaki

# of Collaborated Projects: 1 results

# of Collaborated Products: 8 results
15. MURATA kenji

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results

Kamiya Osamu 神谷 修

神谷 修 カミヤ オサム

KAMIYA Osamu 神谷 修

Research Projects

Research Products

Co-Researchers

Explosive synthesis of composite hexagonal ultrahard abrasive grains composed of boron, carbon, and nitrogen and its application to cuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Precision Machining of Diamond Plate by Saw Wire Fixed Grain of Wurtzite type Boron NitridePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Hybrid Machining by Micro Saw Wire Bonded with Diamond Grains using Metal SolderPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research for the generation of antibacterial effect of metal and bacterial ability of its surface based on a newly developed bioassay

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Environmental friendly remediation and recycling method for contaminated soil by combination of Bioleaching and BioremediationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on remediation of contaminated soil using electroconductive zeolite electrode and electrokinetic phenomenon

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

BIOREMEDIATION OF SOIL CONTAMINATED BY OIL AND DIOXINS

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Micro Machining by an Element Selective Corrosion Action of Thiobacillus Genus BacteriumPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Combustion Flame Synthesizing of Diamond Film and Joining on Metal SurfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Development of Reinforced Concrete Dismantling System Using Steam Pressure Cracking Agent SPC2024

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Influence of Diamond Seed Attachment Processing on Diamond Films Synthesized on Tungsten Carbide Substrate by Flame Combustion2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Dismantling of Reinforced Concrete Using Steam Pressure Cracking System: Drilling and Crack Propagation2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Cutting of Diamond Substrate Using Fixed Diamond Grain Saw Wire2022

Author(s)

Kamiya Osamu 神谷修

神谷修カミヤオサム

KAMIYA Osamu 神谷修