• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

KOIDE Takao  小出 隆夫

ORCIDConnect your ORCID iD *help
… Alternative Names

KOIDE Tkao  小出 隆夫

小出 隆生

Less
Researcher Number 60127446
Other IDs
External Links
Affiliation (Current) 2025: 鳥取大学, 工学部, 特任教授
Affiliation (based on the past Project Information) *help 2017: 鳥取大学, 工学研究科, 教授
2015 – 2016: 鳥取大学, 工学(系)研究科(研究院), 教授
2013: 鳥取大学, 工学研究科, 教授
2012 – 2013: 鳥取大学, 工学(系)研究科(研究院), 教授
2011: 鳥取大学, 工学(系)研究科(研究院), 准教授 … More
2009: 鳥取大学, 大学院・工学研究科, 准教授
2008 – 2009: 鳥取大学, 工学研究科, 准教授
2007: 鳥取大学, 工学部, 准教授
1989 – 2000: 鳥取大学, 工学部, 助教授
1986 – 1988: 鳥取大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Design engineering/Machine functional elements/Tribology / 設計工学・機械要素・トライボロジー / 機械要素
Except Principal Investigator
設計工学・機械要素・トライボロジー / 機械要素 / Design engineering/Machine functional elements/Tribology / Biomedical engineering/Biomaterial science and engineering
Keywords
Principal Investigator
面圧強度 / Wear / 摩耗 / 歯車 / 歯面強度 / 曲げ疲労強度 / 表面転造 / 焼結金属 / Voltage / Pitting … More / Fatigue Life / Surface Roughness / Roller / Contact Stress / Electric Wear / 磨耗 / 面圧疲労寿命 / 表面あらさ / 電流 / 電圧 / ピッチング / 疲労寿命 / 表面粗さ / ローラ / 接触応力 / 電食 / Plastic / Solid Film Lubrication / Efficiency / Friction / Vacuum / Gear / プラスチック / 固体潤滑膜 / 効率 / 摩擦 / 真空 … More
Except Principal Investigator
歯車 / Gear / 曲げ疲労強度 / FEM / 残留応力 / Bending Fatigue Strength / Residual Stress / Induction Hardening / 高周波焼入れ / 浸炭焼入れ / ショットピーニング / 誘導電流密度 / Elastic-Plastic Stress Analysis / Heat Conduction Analysis / Electromagnetic Field Analysis / 歯面強度 / 弾塑性応力解析 / 熱伝導解析 / 電磁界解析 / Low Temperature / Wear / Vacuum / 低温 / 摩耗 / 真空 / 硬化層 / 熱処理 / 機械要素 / 力学特性 / 単軸引張 / 神経線維束 / 衝突解析 / 実験計画法 / 有限要素解析 / 引張試験 / 交通外傷 / セダン / SUV / 外傷性脳傷害 / 歩行者 / バイオメカニクス / Efficiency / Coefficient of Friction / Impact Strength / 硬化層厚さ / 侵炭焼入れ / 温度 / 効率 / 摩擦係数 / 衝撃強度 / Shot Peening / Vacuum Carburizing / Gas Carburizing / Intergranular Oxidation / Case-Hardening / サブゼロ処理 / ショットブラスト / 真空浸炭 / ガス浸炭 / 粒界酸化 / Hardened Layer / Induced Current Density / Shaft / Heating Coil / 軸 / 加熱コイル / Miner's Hypothesis / Load Variation / Tufftriding / Ion-Nitriding / Shot-Peening / Sintered Metal / Fatigue Strength / ずぶ焼入れ / 密度 / 焼結温度 / 調質 / マイナ-の仮説 / 荷重変動 / 軟窒化 / イオン窒化 / 焼結金属 / 疲労強度 / Electric Current Density / Frequency Analysis / Crack Length / AE Cumulative Energy Count / AE Cumulative Event Count / Bending Fatigue Failure / Gear Failure / Acoustic Emission / 周波数分折 / 周波数分析 / き裂長さ / AEエネルギー総数 / AE事象計数総数 / 曲げ疲労損傷 / 歯車損傷 / アコースティック・エミッション / Surface Durability / 歯車強度 / Solid Film Lubrication / Friction / プラスチック / 固体潤滑膜 / 摩擦 / 薄肉 / 小形・軽量化 / リム・ウェブ厚さ / かみ合い率 / ねじれ角 / 薄肉構造 / 歯元応力 / はすば歯車 / シミュレーション / 最適化 Less
  • Research Projects

    (14 results)
  • Research Products

    (65 results)
  • Co-Researchers

    (6 People)
  •  Traumatic Brain Injury Mechanism in a Pedestrian Accident

    • Principal Investigator
      Tamura Atsutaka
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Biomedical engineering/Biomaterial science and engineering
    • Research Institution
      Tottori University
  •  Improvement of strength of sintered metal gear for environmental load reductionPrincipal Investigator

    • Principal Investigator
      KOIDE Takao
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Tottori University
  •  Bending Strength Design of Thin-Rimmed Helical Gears with Various Web Arrangements

    • Principal Investigator
      MIYACHIKA Kouitsu
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Tottori University
  •  Optimization of Gear Strength Using Heat Treatment Simulation

    • Principal Investigator
      MIYACHIKA Kouitsu
    • Project Period (FY)
      2007 – 2009
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Design engineering/Machine functional elements/Tribology
    • Research Institution
      Tottori University
  •  Fundamental Study on Electric Wear of Machine Elements by means of RollersPrincipal Investigator

    • Principal Investigator
      KOIDE Takao
    • Project Period (FY)
      1998 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tottori University
  •  Study on Optimum Coil Design and Hardening Condition for Gear Induction Hardening

    • Principal Investigator
      MIYACHIKA Kouitsu
    • Project Period (FY)
      1997 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tottori University
  •  Study on Residual Stress and Optimum Hardening Condition of Induction Hardened Gears

    • Principal Investigator
      ODA Satoshi
    • Project Period (FY)
      1994 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tottori University
  •  Study on Mechanism of Bending Ftigue Breakage and Strengthening Method of Gear Teeth

    • Principal Investigator
      ODA Satoshi
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tottori University
  •  Study on Prediction and Monitoring Technique of Failure of Gear Teeth by Means of AE Method

    • Principal Investigator
      MIYACHIKA Kouitsu
    • Project Period (FY)
      1993 – 1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      設計工学・機械要素・トライボロジー
    • Research Institution
      Tottori University
  •  Study on Performance and Mechanism of Breakage of Solid Film Lubricants Lubricants of GearsPrincipal Investigator

    • Principal Investigator
      KOIDE Takao
    • Project Period (FY)
      1992 – 1993
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Tottori University
  •  Evaluation of Performance and Development of Surface Treatment Method of Gears for Space Application

    • Principal Investigator
      ODA Satoshi
    • Project Period (FY)
      1991 – 1993
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      機械要素
    • Research Institution
      Tottori University
  •  Study on Residual Stress and Load Bearing Capacity of Induction Hardened Gears

    • Principal Investigator
      ODA Satoshi
    • Project Period (FY)
      1991 – 1993
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Tottori University
  •  Study on Load Bearing Capacity of Gears in Special Environment

    • Principal Investigator
      ODA Satoshi
    • Project Period (FY)
      1988 – 1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Tottori University
  •  Study on Effect of Intergranular Oxidation on the Bending Fatigue Strength of Case-Hardened Gears

    • Principal Investigator
      ODA Satoshi
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械要素
    • Research Institution
      Tottori University

All 2018 2017 2016 2015 2012 2011 2010 2009 2008 2007

All Journal Article Presentation

  • [Journal Article] Comparative analysis on traumatic brain injury risk due to primary and secondary impacts in a pedestrian sideswipe accident2018

    • Author(s)
      Atsutaka Tamura, Junji Hasegawa, Takao Koide
    • Journal Title

      ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B

      Volume: in press Issue: 4

    • DOI

      10.1115/1.4039464

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Dynamic tensile behavior of fiber bundles freshly isolated from nerve roots2017

    • Author(s)
      Atsutaka Tamura, Jun-ichi Hongu, Tomomi Yamamoto, Takao Koide
    • Journal Title

      Proceedings of ASME 2017 International Mechanical Engineering Congress & Exposition

      Volume: 3

    • DOI

      10.1115/imece2017-70796

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Effects of translational and rotational accelerations on traumatic brain injury in a sport utility vehicle-to-pedestrian crash2016

    • Author(s)
      Atsutaka Tamura, Takao Koide and King H. Yang
    • Journal Title

      International Journal of Vehicle Design

      Volume: 72 Issue: 3 Pages: 208-229

    • DOI

      10.1504/ijvd.2016.080589

    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Effects of anatomical site and loading rate on tensile behavior of fiber bundles isolated from nerve roots2016

    • Author(s)
      Atsutaka Tamura, Mizuki Sakaya and Takao Koide
    • Journal Title

      Proceedings of ASME 2016 International Mechanical Engineering Congress & Exposition

      Volume: 3

    • DOI

      10.1115/imece2016-66016

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Comparative analysis on traumatic brain injury risk due to primary and secondary impacts in a vehicle-pedestrian sideswipe accident2016

    • Author(s)
      Atsutaka Tamura, Junji Hasegawa and Takao Koide
    • Journal Title

      Proceedings of ASME 2016 International Mechanical Engineering Congress & Exposition

      Volume: 14

    • DOI

      10.1115/imece2016-66021

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Effects of ground impact on traumatic brain injury in a fender vault pedestrian crash2015

    • Author(s)
      Atsutaka Tamura, Takao Koide and King H. Yang
    • Journal Title

      International Journal of Vehicle Safety

      Volume: 8 Issue: 1 Pages: 85-100

    • DOI

      10.1504/ijvs.2015.066278

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Pedestrian accident reconstruction using a human body finite element model2015

    • Author(s)
      Atsutaka Tamura and Takao Koide
    • Journal Title

      Proceedings of ASME 2015 International Design & Engineering Technical Conference and Computers & Information in Engineering Conference

      Volume: 1A Pages: 1-8

    • DOI

      10.1115/detc2015-46969

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Strain rate effects on the tensile behavior of fiber bundles isolated from nerve root2015

    • Author(s)
      Atsutaka Tamura, Junji Murakami, Yuta Sone and Takao Koide
    • Journal Title

      Journal of Sustainable Research in Engineering

      Volume: 2 Pages: 63-69

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] Strain rate effects on the tensile behavior of fiber bundles isolated from nerve root2015

    • Author(s)
      Atsutaka Tamura, Junji Murakami, Yuta Sone and Takao Koide
    • Journal Title

      Proceedings of 2015 Sustainable Research and Innovation Conference

      Volume: 6 Pages: 80-85

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Journal Article] 薄肉はすば歯車の歯元応力に及ぼすリム・ウェブ厚さの影響2012

    • Author(s)
      宮近幸逸,Daing Mohamad Nafiz Bin daing Idris,小出隆夫,Imaduddin Hermi Bin Wan Nordin,安藤和彰
    • Journal Title

      日本機械学会論文集(C編)

      Volume: 第77巻,775号 Pages: 597-603

    • NAID

      130000873770

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012

    • Author(s)
      Kouitsu Miyachika, Daing Mohamad Nafiz Daing Idris and Takao Koide
    • Journal Title

      Proc. of The 2nd Asian Conference on Mechanism and Machine Science (ASIAN-MMS2012)

      Volume: Vol.1

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] Effects of Rim and Web Thicknesses on Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012

    • Author(s)
      Daing Mohamad Nafiz Bin Daing Idris, Kouitsu Miyachika and Takao Koide
    • Journal Title

      Proc. of the 4th Joint Symposium Mechanical and Materials Engineering between Northeastern University, Dalian Uni- versity and Tottori University

      Pages: 113-119

    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] Effects of Rim and Web Thicknesses on Root Stresses of Thin-Rimmed Helical Gears with Web Arrangement2012

    • Author(s)
      Daing Mohamad Nafiz Daing Idris, Kouitsu Miyachika and Takao Koide
    • Journal Title

      Proc. of The 4th Joint Symposium on Mechanical and Materials Engineering between Northeastern University, Dalian University of Technology and Tottori University

      Volume: Vol.1 Pages: 113-119

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] Root Stressses of Thin-Rimmed Helical Gears with Asymmetric Web Arrange- ment2011

    • Author(s)
      Daing Mohamad Nafiz Bin Daing Idris, Kouitsu Miyachika, Imaduddin Hermi Bin Wan Nordin and Takao Koide
    • Journal Title

      Proc. of 4th International Con- ference on Manufacturing, Machine Design and Tribology

      Volume: No.28 Pages: 23-24

    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] 薄肉はすば歯車の歯元応力に及ぼすリム・ウェブ厚さの影響2011

    • Author(s)
      宮近幸逸,Daing Mohamad Nafiz Bin Daing Idris,小出隆夫,Imaduddin Helmi Bin WanNordin,安藤和彰
    • Journal Title

      日本機械学会論文集(C編)

      Volume: 第77巻775号 Pages: 597-603

    • NAID

      130000873770

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] Root Stresses of Thin-Rimmed Helical Gears with Asymmetric Web Arrangement,2011

    • Author(s)
      Daing Mohamad Nafiz Daing Idris, Kouitsu Miyachika, Imaduddin Hermi Bin Wan Nordin and Takao Koide
    • Journal Title

      Proc. of 4th International Conference on Manufacturing, Machine Design and Tribology,

      Volume: No.28 Pages: 23-24

    • Data Source
      KAKENHI-PROJECT-23560161
  • [Journal Article] Effects of Carburized Part, Case Depth and Helix Angle on Bending fatigue Strength of Case-Carburized Helical Gears2009

    • Author(s)
      Kouitsu Miyachika, Kazuaki Ando, Takao Koide, Hidefumi Mada, Hideaki Katanuma, Kengo Nojima, Satoshi Oda
    • Journal Title

      Proceedings of The JSME International Conference on Motion and Power Transmissions

      Pages: 338-343

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Load Bearing Capacity of Surface Rolled High Density Sintered Metal Gears2009

    • Author(s)
      Takao Koide, Ichiro Ishizuka, Teruie Takemasu, Kouitsu Miyachika, Yasuhiro Fukai
    • Journal Title

      Proceedings of The JSME International Conference on Motion and Power Transmissions

      Pages: 313-316

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Bending Fatigue Strength of Case-Carburized Spur Gears with Boss2008

    • Author(s)
      Imaduddin Helimi Bin Wan Nordin, Kazuaki Ando, Kouitsu Miyachika, Tkao Koide, Chiaki Namba
    • Journal Title

      Proceedings of JSMME 2008 Joint Symposium on Merch. and Materials Eng. Between Tottori Univ. and Northeastern Univ.

      Pages: 23-29

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Bending Fatigue Strength of Induction Hardened Thin-Rimmed Spur Gears with Web Arrangement (Effects of Rim Thickness and Web Structure)2008

    • Author(s)
      Meng Mu, Seigo Nishimura, Kouitsu Miyachika, Takao Koide
    • Journal Title

      Proceedings of JSMME 2008 Joint Symposium on Merch. and Materials Eng. Between Tottori Univ. and Northeastern Univ.

      Pages: 157-164

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Effects of Rolling on Load Bearing Capacity of Sintered Metal Gears2008

    • Author(s)
      Ichiro Ishizuka, Takao Koide, Kouitsu Miyachika, teruie Takemasu
    • Journal Title

      Proceedings of JSMME 2008 Joint Symposium on Merch. and Materials Eng. BetweenTottori Univ. and Northeastern Univ.

      Pages: 141-146

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Bending Fatigue Strength of Case-Carburized Spur Gears with Boss2008

    • Author(s)
      Imaduddin Helimi Bin Wan Nordin, Kazuaki Ando, Kouitsu Miyachika, Tkao Koide, Chiaki Namba
    • Journal Title

      Proceedings of JSMME 2008 Joint Symposium on Mech. and Materials Eng. Between Tottori Univ. and Northeastern Univ.

      Pages: 23-29

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Effects of Rolling on Load Bearing Capacity of Sintered Metal Gears2008

    • Author(s)
      Ichiro Ishizuka, Takao Koide, Kouitsu Miyachika, Teruie Takemasu
    • Journal Title

      Proceedings of JSMME 2008 Joint Symposium on Mech. and Materials Eng. Between Tottori Univ. and Northeastern Univ.

      Pages: 141-146

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Residual Stress and Bending Fatigue Strength of Case-Carburiz ed Thin-Rimmed Spur Gears with Asymmetric Web Arrangement2007

    • Author(s)
      Kouitsu MIYACHIKA, Wei-Dong XUE, Takao KOIDE, Hidefumi MADA, Kengo NOJIMA, Satoshi ODA and Hideaki KATANUMA
    • Journal Title

      Proc. of 2007 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Effects of Pre-Treatment and Heating Time on Hardened Layer and Bending Fatigue Strength of Induction Hardened Gears2007

    • Author(s)
      Kouitsu Miyachika, Hideaki Katanuma, Takao Koide, Michiaki Morimoto, Jun Iwanaga, Hidefumi Mada, Satoshi Oda
    • Journal Title

      Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Residual Stress and Bending Fatigue Strength of Case-Carburized Thin-Rimmed Spur Gears with Asymmetric Web Arrangement2007

    • Author(s)
      Kouitsu Miyachia, Wei-Dong Xue, Takao Koide, Hidefumi Mada, Kengo Nojima, Satoshi Odaand, Hideaki Katanuma
    • Journal Title

      Proc. of 2007 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Effects of Pre-Treatment and Heating Time on Hardened Layer and Bending Fatigue Strength of Induction Hardened Gears2007

    • Author(s)
      Kouitsu MIYACHIKA, Hideaki KATANUMA, Takao KOIDE, Michiaki MORIMOTO, Jun IWANAGA, Hidefumi MADA and Satoshi ODA
    • Journal Title

      Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Effects of Heating Conditions on Residual Stress, Hardened Layer and Bending Fatigue Strength of Induction Hardened Sintered Metal Gears2007

    • Author(s)
      Kouitsu Miyachika, Takao Koide, Satoshi Oda, Naoki Motoka, Keiichi Uemoto, Yoshihisa Matsumoto, Hideaki Katanuma
    • Journal Title

      Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)

    • Data Source
      KAKENHI-PROJECT-19560143
  • [Journal Article] Effects of Heating Conditions on Residual Stress, Hardened Layer and Bending Fatigue Strength of Induction Hardened Sintered Metal Gears2007

    • Author(s)
      Kouitsu MIYACHIKA, Takao KOIDE, Satoshi ODA, Naoki MOTOOKA, Keiichi UEMOTO, Yoshihisa MATSUMOTO and Hideaki KATANUMA
    • Journal Title

      Proc. of JSME-KSME Joint International Conference on Manufacturing, Machine Design and Tribology (CD-ROM)

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 歯面研削を施さない表面転造焼結金属歯車の荷重伝達能力2018

    • Author(s)
      藤山隼輔,小出隆夫,本宮潤一,田村篤敬,竹増光家,西田 智,谷口祐司
    • Organizer
      日本機械学会中国四国支部第56期総会・講演会
    • Data Source
      KAKENHI-PROJECT-15K05763
  • [Presentation] Fatigue strength of lean alloyed sintered metal gears with surface-rolling2017

    • Author(s)
      Junichi Hongu, Takao Koide, Teruie Takemasu, Atsutaka Tamura, Takaaki Yasugi, Norimitsu Hirose
    • Organizer
      The 7th International Conference on Manufacturing, Machine Design and Tribology
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05763
  • [Presentation] Dynamic tensile behavior of fiber bundles freshly isolated from nerve roots2017

    • Author(s)
      Atsutaka Tamura, Jun-ichi Hongu, Tomomi Yamamoto, Takao Koide
    • Organizer
      ASME 2017 International Mechanical Engineering Congress & Exposition
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] 引張速度が神経線維束の力学特性に及ぼす影響2017

    • Author(s)
      山本朋実,田村篤敬,本宮潤一,小出隆夫
    • Organizer
      日本機械学会 中国四国学生会 第47回学生員卒業研究発表講演会
    • Place of Presentation
      広島工業大学(広島)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] Biaxial mechanical response of porcine spinal dura mater2017

    • Author(s)
      Atsutaka Tamura, Yuki Kawaguchi, Yuta Sone, Takao Koide
    • Organizer
      The XXVIth Congress of International Society of Biomechanics
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] Effects of anatomical site and loading rate on tensile behavior of fiber bundles isolated from nerve roots2016

    • Author(s)
      Atsutaka Tamura, Mizuki Sakaya and Takao Koide
    • Organizer
      ASME 2016 International Mechanical Engineering Congress and Exposition
    • Place of Presentation
      Phoenix, Arizona, USA
    • Year and Date
      2016-11-11
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] 低合金焼結金属歯車の疲労強度2016

    • Author(s)
      小出 隆夫,竹増 光家,田村 篤敬,安木 崇朗,廣瀬 徳豊
    • Organizer
      日本機械学会2016年度年次大会
    • Place of Presentation
      九州大学伊都キャンパス
    • Year and Date
      2016-09-11
    • Data Source
      KAKENHI-PROJECT-15K05763
  • [Presentation] Development of a biaxial tensile tester for soft biological materials2016

    • Author(s)
      Atsutaka Tamura, Yuki Kawaguchi, Yuta Sone and Takao Koide
    • Organizer
      Proceedings of 6th Joint Symposium on Materials and Mechanical Engineering between Northeastern University and Tottori University
    • Place of Presentation
      Tottori, Japan
    • Year and Date
      2016-09-24
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] 脊髄硬膜の動的二軸引張試験方法の開発2016

    • Author(s)
      曽根悠太,田村篤敬,川口佑樹,小出隆夫
    • Organizer
      日本機械学会 中国四国支部 第54期総会・講演会
    • Place of Presentation
      愛媛大学(松山)
    • Year and Date
      2016-03-09
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] 焼結金属歯車の疲労強度に及ぼす密度とショットピーニングの影響2016

    • Author(s)
      安木崇朗,小出隆夫,竹増光家,田村篤敬,西田 智
    • Organizer
      日本機械学会中国四国支部第54期総会・講演会
    • Place of Presentation
      愛媛大学城北キャンパス
    • Year and Date
      2016-03-09
    • Data Source
      KAKENHI-PROJECT-15K05763
  • [Presentation] Comparative analysis on traumatic brain injury risk due to primary and secondary impacts in a vehicle-pedestrian sideswipe accident2016

    • Author(s)
      Atsutaka Tamura, Junji Hasegawa and Takao Koide
    • Organizer
      ASME 2016 International Mechanical Engineering Congress and Exposition
    • Place of Presentation
      Phoenix, Arizona, USA
    • Year and Date
      2016-11-11
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] 神経根から単離した線維束の単軸引張試験2015

    • Author(s)
      曽根悠太,村上潤治,田村篤敬,小出隆夫
    • Organizer
      第54回日本生体医工学会
    • Place of Presentation
      名古屋国際会議場(名古屋)
    • Year and Date
      2015-05-09
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] Strain rate effects on the tensile behavior of fiber bundles isolated from nerve root2015

    • Author(s)
      Atsutaka Tamura, Junji Murakami, Yuta Sone and Takao Koide
    • Organizer
      2015 Sustainable Research and Innovation Conference
    • Place of Presentation
      Nairobi, Kenya
    • Year and Date
      2015-05-07
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] Pedestrian accident reconstruction using a human body finite element model2015

    • Author(s)
      Atsutaka Tamura and Takao Koide
    • Organizer
      ASME 2015 International Design & Engineering Technical Conference and Computers & Information in Engineering Conference
    • Place of Presentation
      Boston, USA
    • Year and Date
      2015-08-05
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] Pedestrian kinematics and brain injury risk involved in a sideswipe accident2015

    • Author(s)
      Atsutaka Tamura and Takao Koide
    • Organizer
      The 8th Asian-Pacific Conference on Biomechanics (AP Biomech 2015)
    • Place of Presentation
      Sapporo, Japan
    • Year and Date
      2015-09-19
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K01290
  • [Presentation] 薄肉対称ウェブ構造はすば歯車の歯元応力と曲げ疲労強度に及ぼすリム・ウェブ厚さの影響2012

    • Author(s)
      Daing Mohamad Nafiz Daing Idris,宮近幸逸,小出隆夫
    • Organizer
      日本機械学会,第12回基素潤滑設計部門講演会
    • Place of Presentation
      愛媛県民会館
    • Data Source
      KAKENHI-PROJECT-23560161
  • [Presentation] 薄肉対称ウェブ構造はすば歯車の歯元応力と曲げ疲労強度に及ぼすリム・ウェブ厚さの影響2012

    • Author(s)
      Daing Mohamad Nafiz Bin Daing Idris,宮近幸逸,小出隆夫
    • Organizer
      日本機械学会第12回機素潤滑設計部門講演会
    • Place of Presentation
      愛媛県民会館
    • Data Source
      KAKENHI-PROJECT-23560161
  • [Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす側面浸炭焼入れおよび歯幅の影響2010

    • Author(s)
      茅山真士, 近幸逸, 馬田秀文, 小出隆夫, 志賀寿
    • Organizer
      且本機械学会講演論文集 No.105-1 133~134頁
    • Place of Presentation
      広島工業大学
    • Year and Date
      2010-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高密度焼結金属歯車の荷重伝達能力に及ぼす表面転造とショットピーニングの影響2010

    • Author(s)
      小出隆夫, 深井康宏, 竹増光家, 宮近幸逸
    • Organizer
      日本機械学会中国四国支部第48期総会・講演会
    • Place of Presentation
      広島工業大学
    • Year and Date
      2010-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高密度焼結金属歯車の荷重伝達能力に及ぼす表面転造とショットピーニングの影響2010

    • Author(s)
      小出隆夫, 深井康宏, 竹増光家, 宮近幸逸
    • Organizer
      日本機械学会講演論文集 No.105-1 101~1O2頁
    • Place of Presentation
      広島工業大学
    • Year and Date
      2010-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす側面浸炭焼入れおよび歯幅の影響2010

    • Author(s)
      茅山真士, 宮近幸逸, 馬田秀文, 小出隆夫, 志賀寿
    • Organizer
      日本機械学会中国四国支部第48期総会・講演会
    • Place of Presentation
      広島工業大学
    • Year and Date
      2010-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高密度焼結金属歯車の荷重伝達能力に及ぼす表面転造の影響2009

    • Author(s)
      小出隆夫, 深井康宏, 石塚伊知郎, 竹増光家, 宮近幸逸
    • Organizer
      日本機械学会中国四国支部第47期総会・講演会
    • Place of Presentation
      山口大学
    • Year and Date
      2009-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れ歯車の曲げ疲労および衝撃強度に及ぼす焼戻しの影響2009

    • Author(s)
      西村征吾, 宮近幸逸, 安藤和彰, 志賀寿, 小出隆夫
    • Organizer
      日本機械学会中国四国支部第47期総会・講演会
    • Place of Presentation
      山口大学
    • Year and Date
      2009-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高周波焼入れ歯車の曲げ疲労(加熱時間, 前処理および歯数の影響)2009

    • Author(s)
      宮近幸逸, 牟猛, 片沼秀明, 吉村樹, 馬田秀文, 小出隆夫
    • Organizer
      日本機械学会中国四国支部第47期総会・講演会
    • Place of Presentation
      山口大学
    • Year and Date
      2009-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れはすば歯車の曲げ疲労強度・き裂伝ぱ2008

    • Author(s)
      安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
    • Organizer
      日本機械学会第8回機素潤滑設計部門講演会
    • Place of Presentation
      倉敷アイビースクエア
    • Year and Date
      2008-04-21
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高周波焼入れ歯車の硬さと曲げ疲労強度2008

    • Author(s)
      片沼秀明, 竹村揚一, 宮近幸逸, 小出隆夫, 小田哲
    • Organizer
      日本機械学会第8回機素潤滑設計部門講演会
    • Place of Presentation
      倉敷アイビースクエア
    • Year and Date
      2008-04-21
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす焼戻しの影響2008

    • Author(s)
      西村征吾, 安藤和彰, 宮近幸逸, 小出隆夫, 難波千秋, 小田 哲
    • Organizer
      日本機械学会中国四国支部・九州支部合同企画「岡山講演会」
    • Place of Presentation
      岡山大学
    • Year and Date
      2008-10-22
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れ歯車の曲げ疲労強度に及ぼす焼戻しの影響2008

    • Author(s)
      西村征吾, 安藤和彰, 宮近幸逸, 小出隆夫, 難波千秋, 小田哲
    • Organizer
      日本機械学会中国四国支部・九州支部合同企画「岡山講演会」
    • Place of Presentation
      岡山大
    • Year and Date
      2008-10-22
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高周波および浸炭焼入れ歯車の硬化層と曲げ疲労強度2008

    • Author(s)
      片沼秀明, 宮近幸逸, 竹村揚一, 小出隆夫, 小田哲
    • Organizer
      日本機械学会2008年度年次大会
    • Place of Presentation
      横浜国立大学
    • Year and Date
      2008-08-02
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れ平歯車の歯元曲げ強度に及ぼすボス幅の影響2008

    • Author(s)
      安藤和彰, 宮近幸逸, 小出隆夫, 難波千秋, 小田哲
    • Organizer
      日本機械学会中国四国支部第46期総会・講演会
    • Place of Presentation
      近畿大学工学部(東広島市)
    • Year and Date
      2008-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭および高周波焼入れ薄肉非対称ウェブ構造平歯車の曲げ疲労強度・き裂2008

    • Author(s)
      竹村揚一, 牟猛, 片沼秀明, 宮近幸逸, 小出隆夫, 小田哲
    • Organizer
      日本機械学会中国四国支部第46期総会・講演会
    • Place of Presentation
      近畿大学工学部(東広島市)
    • Year and Date
      2008-03-06
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高周波焼入れ薄肉ウェブ構造平歯車の曲げ疲労強度(リム厚さおよびウェブ構造の影響)2007

    • Author(s)
      宮近幸逸, 牟猛, 片沼秀明, 竹村揚一, 小出隆夫, 難波千秋
    • Organizer
      日本機械学会MPT2007シンポジウム<伝動装置>
    • Place of Presentation
      鳥取県民文化会館
    • Year and Date
      2007-11-29
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れはすば歯車の曲げ疲労強度・き裂に及ぼすねじれ角・浸炭部の影響2007

    • Author(s)
      安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
    • Organizer
      日本機械学会2007年度年次大会
    • Place of Presentation
      関西大学吹田キャンパス
    • Year and Date
      2007-09-11
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れはすば歯車の残留応力と曲げ疲労強度(硬化層深さ, ねじれ角および浸炭部の影響)2007

    • Author(s)
      安藤和彰, 宮近幸逸, 小出隆夫, 小田哲
    • Organizer
      日本機械学会MPT2007シンポジウム<伝動装置>
    • Place of Presentation
      鳥取県民文化会館
    • Year and Date
      2007-11-29
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 高周波焼入れ歯車の曲げ疲労強度に対する最適硬化層パターン2007

    • Author(s)
      片沼秀明, 竹村揚一, 宮近幸逸, 小出隆夫, 小田哲
    • Organizer
      日本機械学会MPT2007シンポジウム<伝動装置>
    • Place of Presentation
      鳥取県民文化会館
    • Year and Date
      2007-11-29
    • Data Source
      KAKENHI-PROJECT-19560143
  • [Presentation] 浸炭焼入れはすば歯車の残留応力と曲げ疲労強度(硬化層深さ,ねじれ角および浸炭部の影響)2007

    • Author(s)
      安藤和彰, 宮近幸逸, 小出隆夫, 小田 哲
    • Organizer
      日本機械学会MPT2007シンポジウム<伝動装置>
    • Place of Presentation
      鳥取県民文化会館
    • Year and Date
      2007-11-29
    • Data Source
      KAKENHI-PROJECT-19560143
  • 1.  MIYACHIKA Kouitsu (30157664)
    # of Collaborated Projects: 12 results
    # of Collaborated Products: 39 results
  • 2.  ODA Satoshi (50032016)
    # of Collaborated Projects: 10 results
    # of Collaborated Products: 0 results
  • 3.  KAWAGOE Haruo (60032009)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  Tamura Atsutaka (30394836)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 24 results
  • 5.  TAKI Tokihiko (40248208)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 6.  本宮 潤一 (80781690)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi