Inagaki Ryoichi 稲垣亮一

… Alternative Names

稲垣亮一イナガキリヨウイチ

Ryoichi Inagaki 稲垣亮一

INAGAKI Ryoichi 稲垣亮一

Less

Researcher Number	60260444
Other IDs
Affiliation (Current)	2025: 東北大学, 歯学研究科, 大学院非常勤講師
Affiliation (based on the past Project Information) *help	2025: 東北大学, 歯学研究科, 大学院非常勤講師 2023: 東北大学, 歯学研究科, 講師 2016 – 2021: 東北大学, 歯学研究科, 講師 2013 – 2015: 東北大学, 歯学研究科(研究院), 講師 2007 – 2009: Tohoku University, 大学院・歯学研究科, 講師
Review Section/Research Field	Principal Investigator Basic Section 57050:Prosthodontics-related / Prosthodontics/ Dental materials science and / 補綴理工系歯学 Except Principal Investigator Basic Section 57050:Prosthodontics-related / 補綴理工系歯学
Keywords	Principal Investigator CAD/CAM / 強度 / ジルコニア / クラウン / ラジカル / 変色 / 紫外線 / 結晶 / 高光透過性 / 結晶構造 … More / 機械的性質 / 光透過性 / イットリア / デジタル歯科 / 冠橋義歯補綴学 / 熱膨張 / レジン / 脱離 / 疲労 / セラミッククラウン / 硬質レジンクラウン / 厚み / 低温劣化 / 耐久性 / 補綴装置 / 切削性 / CAM / CAD / チタン合金 / 上部構造体 / インプラント補綴 / 三次元有限要素法 / インターナルジョイント型 / エクスターナルジョイント型 / アバットメント / 歯科インプラント補綴 … More Except Principal Investigator イットリア / 強度 / 透光性 / 歯科用ジルコニア / 切削温度 / 耐食性 / 切削性 / インプラント / CAM / CAD / 歯科用合金 / チタン合金 Less

イットリア濃度制御による高強度かつ高透光性を有するバイモーダルジルコニアの創出
- Principal Investigator
  
  菅野太郎
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 57050:Prosthodontics-related
- Research Institution
  Tohoku University
Mechanism underlying discoloration of monolithic zirconia induced by photochemical reactionsPrincipal Investigator
- Principal Investigator
  
  稲垣亮一
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 57050:Prosthodontics-related
- Research Institution
  Tohoku University
Comprehensive analysis of high-translucent dental zirconia ceramicsPrincipal Investigator
- Principal Investigator
  
  Inagaki Ryoichi
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 57050:Prosthodontics-related
- Research Institution
  Tohoku University
Fatigue analysis of resin-based composite molar crowns fabricated via CAD/CAM techniquePrincipal Investigator
- Principal Investigator
  
  Ryoichi Inagaki
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Prosthodontics/ Dental materials science and
- Research Institution
  Tohoku University
Mechanical properties of monolithic zirconia crownsPrincipal Investigator
- Principal Investigator
  
  Ryoichi Inagaki
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Prosthodontics/ Dental materials science and
- Research Institution
  Tohoku University
Development of dental CAD/CAM titanium alloys suitable for custom-made implants
- Principal Investigator
  
  KIKUCHI Masafumi
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  補綴理工系歯学
- Research Institution
  Tohoku University
Influence of the custom abutment form on the strength of superstructurePrincipal Investigator
- Principal Investigator
  
  RYOICHI Inagaki
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  補綴理工系歯学
- Research Institution
  Tohoku University

All 2024 2023 2020 2018 2015 2014 2009 2008 2007 Other

All Journal Article Presentation

[Journal Article] Mechanism underlying ultraviolet-irradiation-induced discoloration of dental zirconia ceramics stabilized with 3 and 5?mol% yttria2024
- Author(s)
  Kurihara Akari、Nakamura Keisuke、Shishido Shunichi、Inagaki Ryoichi、Harada Akio、Kanno Taro、Egusa Hiroshi
- Journal Title
  
  Ceramics International
  
  Volume: 50 Issue: 7 Pages: 12136-12145
- DOI
  10.1016/j.ceramint.2024.01.117
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23K09267
[Journal Article] Mechanical and microstructural properties of ultra-translucent dental zirconia ceramic stabilized with 5 mol% yttria2020
- Author(s)
  Harada A, Shishido S, Barkarmo S, Inagaki R, Kanno T, Ortengren U, Egusa H, Nakamura K
- Journal Title
  
  J Mech Behav Biomed Mater
  
  Volume: 111 Pages: 103974-103974
- DOI
  10.1016/j.jmbbm.2020.103974
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K10239
[Journal Article] Surface properties of dental zirconia ceramics affected by ultrasonic scaling and low-temperature degradation2018
- Author(s)
  Nakazawa K, Nakamura K, Harada A, Shirato M, Inagaki R, Ortengren U, Kanno T, Niwano Y, Egusa H.
- Journal Title
  
  PLoS One
  
  Volume: 13 Issue: 9 Pages: e0203849-e0203849
- DOI
  10.1371/journal.pone.0203849
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K07788, KAKENHI-PROJECT-16K11583, KAKENHI-PROJECT-16K20481
[Journal Article] Influence of microscale expansion and contraction caused by thermal and mechanical fatigue on retentive strength of CAD/CAM-generated resin-based composite crowns2018
- Author(s)
  Ankyu S, Nakamura K, Harada A, Inagaki R, Katsuda Y, Kanno T, Niwano Y, Ortengren U, Egusa H
- Journal Title
  
  J Mech Behav Biomed Mater
  
  Volume: 86 Pages: 89-97
- DOI
  10.1016/j.jmbbm.2018.06.025
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K07788, KAKENHI-PROJECT-16K11583
[Journal Article] Fracture resistance of monolithic zirconia molar crowns with reduced thickness.2015
- Author(s)
  Nakamura K, Harada A, Inagaki R, Kanno T, Niwano Y, Milleding P, Örtengren U.
- Journal Title
  
  Acta Odontol Scand.
  
  Volume: 30 Issue: 2 Pages: 1-7
- DOI
  10.1111/eos.12173
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24592901, KAKENHI-PROJECT-25462981
[Journal Article] The influence of low-temperature degradation and cyclic loading on the fracture resistance of monolithic zirconia molar crowns2015
- Author(s)
  Nakamura K, Harada A, Kanno T, Inagaki R, Niwano Y, Milleding P, Ortengren U
- Journal Title
  
  J Mech Behav Biomed Mater
  
  Volume: 47 Pages: 49-56
- DOI
  10.1016/j.jmbbm.2015.03.007
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25462981
[Journal Article] Fracture resistance of mnolithic zirconia molar crowns with reduced thickness2015
- Author(s)
  Nakamura K, Harada A, Inagaki R, Kanno T, Niwano Y, Milleding P, Ortengren U
- Journal Title
  
  Acta Odont Scand
  
  Volume: - Issue: 8 Pages: 602-608
- DOI
  10.3109/00016357.2015.1007479
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25462981
[Journal Article] CAD/CAMシステムで製作したオールセラミッククラウンの適合に関する基礎的検討2009
- Author(s)
  須藤紀博, 三浦賞子, 稲垣亮一, 兼田陽介, 依田正信, 木村幸平
- Journal Title
  
  日本補綴歯科学会誌 1
  
  Pages: 21-28
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19592224
[Journal Article] CAD/CAMシステムで製作したオールセラミッククラウン及びブリッジの強度に関する基礎的検討2009
- Author(s)
  須藤紀博, 三浦賞子, 稲垣亮一, 兼田陽介, 依田正信, 木村幸平
- Journal Title
  
  東北大学歯学雑誌 27
  
  Pages: 16-24
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19592224
[Journal Article] CAD/CAMシステムで製作したオールセラミッククラウンの適合に関する基礎的検討2009
- Author(s)
  須藤紀博, 三浦賞子, 稲垣亮一, 兼田陽介依田正信, 木村幸平
- Journal Title
  
  日本補綴歯科学会誌 1
  
  Pages: 21-28
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19592224
[Journal Article] Strength of porcelain fused to pure titanium made by CAD/CAM2007
- Author(s)
  R. Inagaki, M. Yoda, M. Kikuchi, K.Kimura, O. Okuno
- Journal Title
  
  Interface Oral Health Science 2007
  
  Pages: 347-348
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19592224
[Journal Article] Strength of porcelain fused to pure titanium made by CAD/CAM2007
- Author(s)
  R. Inagaki, M.Yoda, M. Kikuchi, K. Kimura, O. Okuno
- Journal Title
  
  Interface Oral Health Science
  
  Pages: 347-348
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] 紫外線照射による酸素空孔の励起を介した歯科用ジルコニアの変色2023
- Author(s)
  栗原朱, 宍戸駿一, 稲垣亮一, 原田章生, 菅野太郎, 江草宏.
- Organizer
  日本補綴歯科学会　第132回学術大会
- Data Source
  KAKENHI-PROJECT-23K09267
[Presentation] モノリシックジルコニアクラウンの表面結晶構造変化と残留応力の分析2023
- Author(s)
  宍戸駿一, 稲垣亮一, 菅野太郎.
- Organizer
  日本補綴歯科学会　第132回学術大会
- Data Source
  KAKENHI-PROJECT-23K09267
[Presentation] CAD/CAM法による大臼歯硬質レジンジャケットクラウンの強度試験2014
- Author(s)
  原田章生，菅野太郎，稲垣亮一，佐々木啓一
- Organizer
  日本補綴歯科学会第123回学術大会
- Place of Presentation
  宮城
- Data Source
  KAKENHI-PROJECT-25462981
[Presentation] Strength of porcelain fused to Ti-20% Ag alloy frame made by CAD/CAM2009
- Author(s)
  Inagaki R, 他
- Organizer
  第3回インターフェイス口腔健康科学国際シンポジウム
- Place of Presentation
  仙台市
- Year and Date
  2009-01-16
- Data Source
  KAKENHI-PROJECT-19592223
[Presentation] CAD/CAMによる陶材焼付チタンクラウンの破折強さ2008
- Author(s)
  稲垣亮一, 他
- Organizer
  第21回歯科チタン学会
- Place of Presentation
  鳴門市
- Year and Date
  2008-02-15
- Data Source
  KAKENHI-PROJECT-19592223
[Presentation] Machinability Evaluation of a Ti-Ag Alloy Using a Dental CAD/CAM2008
- Author(s)
  Inagaki R, Yoda M, Kikuchi M, Kimura K, Okuno O
- Organizer
  IADR 86th General Session & Exhibition
- Place of Presentation
  Toronto, Canada
- Year and Date
  2008-07-04
- Data Source
  KAKENHI-PROJECT-19592223
[Presentation] Machinability evaluation of a Ti-Ag alloy using a dental CAD/CAM2008
- Author(s)
  Inagaki R, 他
- Organizer
  IADR 86th General Session & Exhibition
- Place of Presentation
  Toronto, Canada
- Year and Date
  2008-07-04
- Data Source
  KAKENHI-PROJECT-19592223
[Presentation] CAD/CAMによる陶材焼付チタンクラウンの破折強さ2008
- Author(s)
  稲垣亮一, ほか4名
- Organizer
  第21回歯科チタン学会
- Place of Presentation
  徳島県鳴門市
- Year and Date
  2008-02-15
- Data Source
  KAKENHI-PROJECT-19592223
[Presentation] Machinability Evaluation of Ti-Ag Alloy and Titanium using Dental CAD/CAM2008
- Author(s)
  R. Inagaki, M. Yoda, M. Kikuchi, K. Kimura, O. Okuno
- Organizer
  第86回 International Association for Dental Research General Session
- Place of Presentation
  Metro Toronto Convention Centre, Canada
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] CAD/CAMによる陶材焼付チタンクラウンの破壊強さ2008
- Author(s)
  稲垣亮一, 依田正信, 菊地聖史, 木村幸平, 奥野攻
- Organizer
  第21回歯科チタン学会
- Place of Presentation
  ルネッサンスリゾートナルト
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] Machinability Evaluation oTi-Ag Alloy and Titanium using Dental CAD/CAM2008
- Author(s)
  R.Inagaki, M.Yoda, M. Kikuchi, K. Kimura, O. Okuno
- Organizer
  第86回 International Association for Dental Research General Session
- Place of Presentation
  Metro Toronto Convention Centre
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] The Bond Strength of Porcelain to CAD/CAM Machined Pure Titanium2007
- Author(s)
  R.Inagaki, M.Yoda, M. Kikuchi, K. Kimura, O. Okuno
- Organizer
  第6回国際歯科チタンシンポジウム
- Place of Presentation
  京都国際会議場
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] Development of titanium alloys for dental CAD/CAM2007
- Author(s)
  O. kuno, M. Kikuchi, M. Takahashi Y.Takada, H. Sato, R. Inagaki
- Organizer
  第6回国際歯科チタンシンポジウム
- Place of Presentation
  京都国際会議場
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] Development of titanium alloys for dental CAD/CAM.2007
- Author(s)
  O. kuno, M. Kikuchi, M. Takahashi Y. Takada, H. Sato, R. Inagaki
- Organizer
  第6回国際歯科チタンシンポジウム
- Place of Presentation
  京都国際会議場
- Data Source
  KAKENHI-PROJECT-19592224
[Presentation] Fracture resistance of CAD/CAM-generated composite resin-based molar crowns
- Author(s)
  Harada A, Nakamura K, Kanno T, Inagaki R, Ortengren U, Niwano Y, Sasaki K, Egusa H
- Organizer
  2015 IADR General Session
- Place of Presentation
  Boston (USA)
- Year and Date
  2015-03-11 – 2015-03-14
- Data Source
  KAKENHI-PROJECT-25462981
[Presentation] Strength of monolithic zirconia molar crowns with reduced thickness
- Author(s)
  Nakamura K, Harada A, Inagaki R, Kanno T, Niwano Y, Milleding P, Ortengren U
- Organizer
  2014 IADR/PER congress
- Place of Presentation
  Dubrovnik (Croatia)
- Year and Date
  2014-09-10 – 2014-09-13
- Data Source
  KAKENHI-PROJECT-25462981
[Presentation] CAD/CAM法による大臼歯硬質レジンジャケットクラウンの強度試験
- Author(s)
  原田章生、菅野太郎、稲垣亮一、佐々木啓一
- Organizer
  日本補綴歯科学会
- Place of Presentation
  仙台（宮城）
- Year and Date
  2014-05-24 – 2014-05-25
- Data Source
  KAKENHI-PROJECT-25462981

1. NAKAMURA Keisuke (30431589)

# of Collaborated Projects: 5 results

# of Collaborated Products: 6 results
2. KIKUCHI Masafumi (50250791)

# of Collaborated Projects: 2 results

# of Collaborated Products: 9 results
3. 菅野太郎 (30302160)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
4. TAKADA Yukyo (10206766)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. TAKAHASHI Masatoshi (50400255)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. YODA Masanobu (70005073)

# of Collaborated Projects: 1 results

# of Collaborated Products: 9 results
7. 宍戸駿一 (20850613)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 庭野吉己

# of Collaborated Projects: 0 results

# of Collaborated Products: 2 results

Inagaki Ryoichi 稲垣 亮一

稲垣 亮一 イナガキ リヨウイチ

Ryoichi Inagaki 稲垣 亮一

INAGAKI Ryoichi 稲垣 亮一

Research Projects

Research Products

Co-Researchers

イットリア濃度制御による高強度かつ高透光性を有するバイモーダルジルコニアの創出

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Mechanism underlying discoloration of monolithic zirconia induced by photochemical reactionsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Comprehensive analysis of high-translucent dental zirconia ceramicsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Fatigue analysis of resin-based composite molar crowns fabricated via CAD/CAM techniquePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Mechanical properties of monolithic zirconia crownsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of dental CAD/CAM titanium alloys suitable for custom-made implants

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Influence of the custom abutment form on the strength of superstructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Mechanism underlying ultraviolet-irradiation-induced discoloration of dental zirconia ceramics stabilized with 3 and 5?mol% yttria2024

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Mechanical and microstructural properties of ultra-translucent dental zirconia ceramic stabilized with 5 mol% yttria2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Surface properties of dental zirconia ceramics affected by ultrasonic scaling and low-temperature degradation2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Influence of microscale expansion and contraction caused by thermal and mechanical fatigue on retentive strength of CAD/CAM-generated resin-based composite crowns2018

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fracture resistance of monolithic zirconia molar crowns with reduced thickness.2015

Author(s)

Journal Title

DOI

Data Source

[Journal Article] The influence of low-temperature degradation and cyclic loading on the fracture resistance of monolithic zirconia molar crowns2015

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fracture resistance of mnolithic zirconia molar crowns with reduced thickness2015

Inagaki Ryoichi 稲垣亮一

稲垣亮一イナガキリヨウイチ

Ryoichi Inagaki 稲垣亮一

INAGAKI Ryoichi 稲垣亮一