Takakuwa Osamu 高桑脩

… Alternative Names

TAKAKUWA OSAMU 高桑脩

TAKAKUWA Osamu 髙桑脩

Less

Researcher Number	60633518
Other IDs
Affiliation (Current)	2025: 九州大学, 工学研究院, 准教授
Affiliation (based on the past Project Information) *help	2020 – 2025: 九州大学, 工学研究院, 准教授 2016: 九州大学, 水素材料先端科学研究センター, 特任准教授 2012 – 2015: 東北大学, 工学(系)研究科(研究院), 助教 2014: 東北大学, 大学院工学研究科, 助教 2012: 東北大学, 大学院・工学研究科, 助教
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Basic Section 18010:Mechanics of materials and materials-related Except Principal Investigator Materials/Mechanics of materials / Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 水素脆化 / 圧子押込み試験 / オーステナイト系ステンレス鋼 / X線CT / 熱活性過程 / 水素ガス環境 / 疲労き裂進展 / 応力拡大係数 / 亀裂 / 表面改質 / ステンレス鋼 / インデンテーション法 / 降伏応力 … More Except Principal Investigator … More 表面科学 / 微視離散構造 / 破壊力学 / エフロレッセンス / カルサイト / アラゴナイト / レーザ / バイオミネラリゼーション / 炭酸カルシウム / 石灰鱗 / 残留応力 / ステンレス鋼 / 疲労試験 / ノズル / 表面力学 / パルスレーザ / 応力拡大係数 / 疲労亀裂進展 / 水素脆化 / キャビテーション / ピーニング / 表面改質 Less

Creation of new fracture mechanics incorporating microscopic discrete structures
- Principal Investigator
  
  武富紳也
- Project Period (FY)
  2025 – 2028
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Saga University
Hydrogen/phase transformation-induced cracking: high-resolution X-ray CT with X-ray diffractionPrincipal Investigator
- Principal Investigator
  
  高桑脩
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyushu University
Hydrogen-assisted fatigue crack growth under gaseous environment interpreted by a thermally activated processPrincipal Investigator
- Principal Investigator
  
  Takakuwa Osamu
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Kyushu University
New material creation following biomineralization - Challenge to control lime scale -
- Principal Investigator
  
  Soyama Hitoshi
- Project Period (FY)
  2015 – 2016
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Evaluation of hydrogen distribution at vicinity of a crack employing a local strain measurementPrincipal Investigator
- Principal Investigator
  
  Takakuwa Osamu
- Project Period (FY)
  2015 – 2016
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyushu University
  Tohoku University
A method to evaluate local hydrogen content near surface using an indentation testPrincipal Investigator
- Principal Investigator
  
  TAKAKUWA OSAMU
- Project Period (FY)
  2013 – 2014
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
Research on Hybrid Peening and Its Application for Suppression of Hydrogen Embrittlement
- Principal Investigator
  
  SOYAMA Hitoshi
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University
圧子押込み試験による耐水素脆化層評価法の構築Principal Investigator
- Principal Investigator
  
  高桑脩
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Research Activity Start-up
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Tohoku University

All 2024 2023 2021 2016 2015 2014 2013 2012 Other

All Journal Article Presentation Book

[Book] 水素利用技術集成Vol. 42014
- Author(s)
  岡野，井関，阿部，児玉，郷右近，中村，伊藤，市川，高野，池田，秋葉，笠井，中西寛，W.A.Dino，三浦，佐原，水関，M.H.F.Sluiter，大野，川添，星野，高野，横堀，大見，祖山，高桑，亀川，岡田，佐藤，久慈，島，侯，池田，高木，大友，折茂，西宮，駒口，菅原，庄野，斉藤，藤田，山口，伊藤，井上，大平，李
- Total Pages
  332
- Publisher
  エヌ・ティー・エス
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Antagonistic fatigue crack acceleration/deceleration phenomena in Ni-based superalloy 718 under hydrogen-supply2023
- Author(s)
  Osamu TAKAKUWA, Yuhei OGAWA, Ryunosuke MIYATA
- Journal Title
  
  Scientific Reports
  
  Volume: 13 Issue: 1 Pages: 1-13
- DOI
  10.1038/s41598-023-33761-4
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-20K04161
[Journal Article] Experimental verification of the hydrogen concentration around a crack tip using spot X-ray diffraction2016
- Author(s)
  Osamu Takakuwa, Takuya Fujisawa, Hitoshi Soyama
- Journal Title
  
  International Journal of Hydrogen Energy
  
  Volume: 41 Issue: 48 Pages: 23188-23195
- DOI
  10.1016/j.ijhydene.2016.10.083
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K17930
[Journal Article] Improvement of delayed fracture resistance on chrome molybdenum steel bolt by cavitation peening2016
- Author(s)
  熊谷直輝，高桑脩，祖山均
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 82 Issue: 842 Pages: 16-00111-16-00111
- DOI
  10.1299/transjsme.16-00111
- NAID
  130005433191
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K17930
[Journal Article] Evaluation of hydrogen content in the surface layer of austenitic stainless steel by means of micro-indentation test with a spherical indenter2015
- Author(s)
  眞野優太，髙桑脩，祖山均
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 81 Issue: 823 Pages: 14-00426-14-00426
- DOI
  10.1299/transjsme.14-00426
- NAID
  130005130789
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360040, KAKENHI-PROJECT-25820001
[Journal Article] Movement of Dislocations in the Sub-Surface of a Polycrystalline Metal by Cavitation Peening Observed by Transmission Electron Microscopy2015
- Author(s)
  O. Takakuwa, A. Chiba and H. Soyama
- Journal Title
  
  Materials Sciences and Applications
  
  Volume: 6 Issue: 02 Pages: 140-144
- DOI
  10.4236/msa.2015.62017
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel2015
- Author(s)
  O. Takakuwa and H. Soyama
- Journal Title
  
  Advances in Chemical Engineering and Science
  
  Volume: 5 Issue: 01 Pages: 62-71
- DOI
  10.4236/aces.2015.51007
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Suppression of hydrogen invasion into austenitic stainless steel by means of cavitation peening2015
- Author(s)
  髙桑　脩, 眞野　優太, 祖山　均
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 81 Issue: 824 Pages: 14-00638-14-00638
- DOI
  10.1299/transjsme.14-00638
- NAID
  130005066593
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-25820001
[Journal Article] Effect of Hydrogen on the Micro- and Macro-strain near the Surface of Austenitic Stainless Steel2014
- Author(s)
  Osamu Takakuwa, Yuta Mano, Hitoshi Soyama
- Journal Title
  
  Advanced Materials Research
  
  Volume: 印刷中
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25820001
[Journal Article] Effect of Hydrogen on the Micro- and Macro-Strain Near the Surface of Austenitic Stainless Steel2014
- Author(s)
  O.Takakuwa, Y.Mano and H.Soyama
- Journal Title
  
  Advanced Materials Research
  
  Volume: 936 Pages: 1298-1302
- DOI
  10.4028/www.scientific.net/amr.936.1298
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24360040, KAKENHI-PROJECT-25820001
[Journal Article] Evaluation of fatigue crack propagation in surface modification layer by a load-controlled plate bending fatigue tester2014
- Author(s)
  髙桑脩，左奈田一将，祖山均
- Journal Title
  
  Transactions of the JSME (in Japanese)
  
  Volume: 80 Issue: 810 Pages: SMM0022-SMM0022
- DOI
  10.1299/transjsme.2014smm0022
- NAID
  130003399130
- ISSN
  2187-9761
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Increase in the local yield stress near surface of austenitic stainless steel due to invasion by hydrogen2014
- Author(s)
  O. Takakuwa, Y. Mano, H. Soyama
- Journal Title
  
  International Journal of Hydrogen Energy
  
  Volume: 39 Issue: 11 Pages: 6095-6103
- DOI
  10.1016/j.ijhydene.2014.01.190
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040, KAKENHI-PROJECT-25820001
[Journal Article] Effect of Indentation Load on Vickers Hardness of Austenitic Stainless Steel after Hydrogen Charging2014
- Author(s)
  Osamu TAKAKUWA, Yuta MANO and Hitoshi SOYAMA
- Journal Title
  
  Proceedings of the ASME2014 Pressure Vessels & Piping Conference
  
  Volume: PVP2014-28280 Pages: 1-6
- DOI
  10.1115/pvp2014-28280
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25820001
[Journal Article] 脊椎固定用インプラントロッドへの水噴流加速式循環型ショットピーニングの適用2014
- Author(s)
  髙桑脩，祖山均
- Journal Title
  
  噴流工学
  
  Volume: 31(1) Pages: 20-27
- NAID
  40020297809
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] The Interaction between Hydrogen and Surface Stress in Stainless Steel2014
- Author(s)
  Osamu TAKAKUWA, Yuta MANO and Hitoshi SOYAMA
- Journal Title
  
  Proceedings of the 12th International Conference on Material Science and Engineering Technology
  
  Volume: 8 Pages: 1285-1289
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25820001
[Journal Article] Estimation of the Yield Stress of Stainless Steel from the Vickers Hardness Taking Account of the Residual Stress2013
- Author(s)
  Osamu Takakuwa, Yusuke Kawaragi, Hitoshi Soyama
- Journal Title
  
  Journal of Surface Engineered Materials and Advanced Technology
  
  Volume: 3 Issue: 04 Pages: 262-268
- DOI
  10.4236/jsemat.2013.34035
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Introduction of Compressive Residual Stress by Means of Cavitation Peening into a Titanium Alloy Rod Used for Spinal Implants2013
- Author(s)
  Osamu Takakuwa, Amrinder S. Gill, Gokul Ramakrishnan, Seetha R. Mannava, Vijay K. Vasudevan, Hitoshi Soyama
- Journal Title
  
  Materials Sciences and Applications
  
  Volume: 4 Issue: 07 Pages: 23-28
- DOI
  10.4236/msa.2013.47a2004
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] An Indicator for the Suppression of Fatigue Crack Growth by Hybrid Peening2013
- Author(s)
  O. Takakuwa, K. Yamamiya and H.S oyama
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 7(招待講演)(印刷中)
- NAID
  130003366875
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Optimizing the conditions for residual stress measurement using a two-dimensional XRD method with specimen oscillation2013
- Author(s)
  Osamu TAKAKUWA and Hitoshi SOYAMA
- Journal Title
  
  Advances in Materials Physics and Chemistry
  
  Volume: 印刷中
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24860004
[Journal Article] An Indicator for the Suppression of Fatigue Crack Growth by Hybrid Peening2013
- Author(s)
  Osamu TAKAKUWA, Kouhei YAMAMIYA and Hitoshi SOYAMA
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 7 Issue: 3 Pages: 357-371
- DOI
  10.1299/jmmp.7.357
- NAID
  130003366875
- ISSN
  1880-9871
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] An Indicator for the Suppression of Fatigue Crack Growth by Hybrid Peening2013
- Author(s)
  Osamu TAKAKUWA, Kouhei YAMAMIYA and Hitoshi SOYAMA
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
  
  Volume: 7
- NAID
  130003366875
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24860004
[Journal Article] Optimizing the Conditions for Residual Stress Measurement Using a Two-Dimensional XRD Method with Specimen Oscillation2013
- Author(s)
  Osamu Takakuwa, Hitoshi Soyama
- Journal Title
  
  Advances in Materials Physics and Chemistry
  
  Volume: 3 Issue: 01 Pages: 8-18
- DOI
  10.4236/ampc.2013.31a002
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Journal Article] Similarity Law on Shedding Frequency of Cavitation Cloud Induced by a Cavitating Jet2012
- Author(s)
  S. Nishimura, O. Takakuwa and H. Soyama
- Journal Title
  
  JFST
  
  Volume: 7 Issue: 3 Pages: 405-420
- DOI
  10.1299/jfst.7.405
- NAID
  130003320177
- ISSN
  1880-5558
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 水素脆性による力学特性の低下とその分析法2024
- Author(s)
  高桑脩
- Organizer
  安全・安心な社会を築く先進材料・非破壊計測技術シンポジウム
- Invited
- Data Source
  KAKENHI-PROJECT-23K25999
[Presentation] First-principles study on the hydrogen absorption energy in Fe-Cr-Ni austenitic systems: Effect of Cr and Ni content2023
- Author(s)
  Junichiro MORIYAMA, Osamu TAKAKUWA, Masatake YAMAGUCHI, Yuhei OGAWA, Kaneaki TSUZAKI
- Organizer
  FEMS EUROMAT23
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K25999
[Presentation] 3D in situ observation for strain-induced martensitic transformation in austenitic steel by synchrotron X-ray2023
- Author(s)
  Tatsuya IWANO, Osamu TAKAKUWA, Kyosuke HIRAYAMA, Hiroyuki TODA
- Organizer
  FEMS EUROMAT23
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K25999
[Presentation] シンクロトロン放射光によるオーステナイト鋼のひずみ誘起マルテンサイト変態の3次元その場観察2023
- Author(s)
  岩野竜也, 高桑脩, 平山恭介, 戸田裕之
- Organizer
  日本鉄鋼協会第186回秋季講演大会
- Data Source
  KAKENHI-PROJECT-23K25999
[Presentation] 水素ガス環境下における炭素鋼の疲労き裂進展温度依存性／負荷周波数依存性2021
- Author(s)
  石井悠太朗、高桑脩
- Organizer
  M&M2021材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-20K04161
[Presentation] Improvement of the Resistance to Delayed Fracture in High-Strength Bolt Made of Cr-Mo Steel by Means of Cavitation Peening2016
- Author(s)
  Osamu Takakuwa, Naoki Kumagai, Hitoshi Soyama
- Organizer
  International Conference on Laser Peening and Related Phenomena
- Place of Presentation
  Skukuza, Kruger National Park
- Year and Date
  2016-11-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K17930
[Presentation] An Experimental Evaluation of the Hydrogen Concentration around a Notch Using an X-ray Diffraction Analysis2016
- Author(s)
  髙桑　脩，星野　柊，祖山　均
- Organizer
  2016 M&M International Symposium for Young Researchers
- Place of Presentation
  Stony Brool University
- Year and Date
  2016-08-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K17930
[Presentation] Prevention of hydrogen entry in stainless steel using a surface modification2016
- Author(s)
  Osamu Takakuwa
- Organizer
  M&M International Symposium for Young Researchers
- Place of Presentation
  Stony Brook University
- Year and Date
  2016-08-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K17930
[Presentation] 微小圧子押込み試験を用いた逆問題解析による生体鉱物の機械的特性の評価2016
- Author(s)
  松田究平，星野純輝，髙桑脩，祖山均
- Organizer
  日本材料学会第65期通常総会・学術講演会
- Place of Presentation
  富山，富山大学
- Year and Date
  2016-05-28
- Data Source
  KAKENHI-PROJECT-15K13823
[Presentation] 応力測定によるステンレス鋼の局所的水素量評価2015
- Author(s)
  藤沢拓弥，髙桑脩，祖山均
- Organizer
  東北学生会第45回学生員卒業研究発表講演会
- Place of Presentation
  八戸高専，八戸
- Year and Date
  2015-03-10
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 昇温脱理分析装置の試作と表面改質したステンレス鋼における水素侵入抑止の実証2015
- Author(s)
  眞野優太, 髙桑脩，祖山均
- Organizer
  日本機械学会東北支部第50期総会・講演会
- Place of Presentation
  東北大学，仙台
- Year and Date
  2015-03-13
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 昇温脱離分析装置の試作と表面改質したステンレス鋼における水素侵入防止の実証2015
- Author(s)
  眞野　優太，髙桑　脩，祖山　均
- Organizer
  日本機械学会第50期総会・講演会
- Place of Presentation
  東北大学　宮城県仙台市
- Year and Date
  2015-03-14
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] 微小部ひずみ測定を用いたき裂先端部への水素凝集挙動の実験的評価2015
- Author(s)
  髙桑　脩，藤沢　拓弥，祖山　均
- Organizer
  日本鉄鋼協会第170回秋季講演大会
- Place of Presentation
  九州大学，福岡県福岡市
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-15K17930
[Presentation] 微小圧子押込み試験による生体鉱物の機械的特性の評価2015
- Author(s)
  星野純輝，松田究平，髙桑脩，祖山均
- Organizer
  日本機械学会東北支部第51期秋季講演会
- Place of Presentation
  いわき，福島高専
- Year and Date
  2015-09-26
- Data Source
  KAKENHI-PROJECT-15K13823
[Presentation] 微小部X線回折測定によるき裂先端部への局所的水素凝集挙動の評価2015
- Author(s)
  髙桑　脩，藤沢　拓弥，祖山　均
- Organizer
  日本機械学会2015年度年次大会
- Place of Presentation
  北海道大学，北海道札幌市
- Year and Date
  2015-09-14
- Data Source
  KAKENHI-PROJECT-15K17930
[Presentation] オーステナイト系ステンレス鋼の水素侵入に及ぼす表面応力の影響とその相互作用2014
- Author(s)
  髙桑　脩，眞野　優太，祖山　均
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島大学　福島県福島市
- Year and Date
  2014-07-21
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] 応力測定によるステンレス鋼の局所的水素量評価法の提案2014
- Author(s)
  髙桑　脩，藤沢　拓弥，祖山　均
- Organizer
  日本機械学会東北支部第50期秋季講演会
- Place of Presentation
  東北学院大学　宮城県多賀城市
- Year and Date
  2014-09-05
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] 応力測定によるステンレス鋼の局所的水素量評価法の提案2014
- Author(s)
  髙桑脩，藤沢拓弥, 祖山均
- Organizer
  日本機械学会東北支部第50期秋季講演会
- Place of Presentation
  東北学院大学，多賀城
- Year and Date
  2014-09-05
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] ステンレス鋼の粒内・粒界における押し込み変形に及ぼす水素の影響2014
- Author(s)
  眞野優太, 髙桑脩，祖山均
- Organizer
  日本機械学会東北支部第50期秋季講演会
- Place of Presentation
  東北学院大学，多賀城
- Year and Date
  2014-09-05
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] キャビテーションピーニングによるTi-6Al-4V ELI合金製脊椎固定器具の耐久性向上2014
- Author(s)
  髙桑脩，祖山均，仲井正昭，成田健吾，新家光雄
- Organizer
  ショットピーニング技術
- Place of Presentation
  明治大学，東京
- Year and Date
  2014-05-22
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] ステンレス鋼の粒内・粒界における押し込み変形に及ぼす水素の影響2014
- Author(s)
  眞野　優太，髙桑　脩，祖山　均
- Organizer
  日本機械学会東北支部第50期秋季講演会
- Place of Presentation
  東北学院大学　宮城県多賀城市
- Year and Date
  2014-09-05
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] 微小圧子押込み試験によるオーステナイト系ステンレス鋼の局所的水素侵入評価2014
- Author(s)
  眞野　優太，髙桑　脩，祖山　均
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島大学　福島県福島市
- Year and Date
  2014-07-21
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] キャビテーションピーニングによる脊椎固定用インプラントチタンロットTi-6A1-4Vへの圧縮残留応力の導入2013
- Author(s)
  高桑脩, A.S.Gill, S.R.Mannava, V.K.Vasudevan, 祖山均
- Organizer
  ショットピーニング技術協会平成25年度学術講演会
- Place of Presentation
  東京
- Year and Date
  2013-05-23
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] キャビテーションピーニングによるステンレス鋼SUS316Lの水素吸蔵の抑止2013
- Author(s)
  祖山均，眞野優太，髙桑脩
- Organizer
  第57回日本学術会議材料工学連合講演会
- Place of Presentation
  京都
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] オーステナイト系ステンレス鋼の極表面層における機械的特性への水素の影響2013
- Author(s)
  高桑脩，眞野優太，祖山均
- Organizer
  日本材料学会第62期学術講演会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-24860004
[Presentation] 荷重制御式平面曲げ疲労試験による表面改質層の下限界応力拡大係数範囲の定量的評価2013
- Author(s)
  高桑脩,左奈田一将,祖山均
- Organizer
  日本材料学会第62期通常総会・学術講演会
- Place of Presentation
  東京
- Year and Date
  2013-05-18
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] ステンレス鋼表面層の降伏応力における水素の影響2013
- Author(s)
  眞野優太，高桑脩，祖山均
- Organizer
  日本機械学会東北支部第48期総会・講演会
- Place of Presentation
  仙台
- Data Source
  KAKENHI-PROJECT-24860004
[Presentation] ステンレス鋼表面層の降伏応力における水素侵入の影響2013
- Author(s)
  眞野優太,高桑脩,祖山均
- Organizer
  日本機械学会東北支部第48期総会・講演会
- Place of Presentation
  仙台
- Year and Date
  2013-03-15
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 衝撃力の計測による圧縮残留応力の推定2013
- Author(s)
  内藤暁馬，髙桑脩，祖山均
- Organizer
  日本機械学会2013年度年次大会
- Place of Presentation
  岡山
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 2D法を用いた残留応力測定に関する計測条件の最適化2013
- Author(s)
  髙桑脩，祖山均
- Organizer
  日本機械学会2013年度年次大会
- Place of Presentation
  岡山
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 気中キャビテーション噴流によるステンレス鋼の水素脆化抑止2013
- Author(s)
  高桑脩,祖山均
- Organizer
  2012年度ウォータージェット技術年次報告会
- Place of Presentation
  仙台
- Year and Date
  2013-01-25
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] ステンレス鋼表面層のマクロ歪およびミクロ歪に及ぼす水素の影響2013
- Author(s)
  眞野優太，髙桑脩，祖山均
- Organizer
  日本機械学会東北支部第49期秋季講演会
- Place of Presentation
  盛岡
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 気中キャビテーション噴流によるステンレス鋼の水素脆化抑止2013
- Author(s)
  高桑脩，祖山均
- Organizer
  2012年度ウォータージェット技術年次報告会
- Place of Presentation
  仙台
- Data Source
  KAKENHI-PROJECT-24860004
[Presentation] ステンレス鋼の下限界応力拡大係数範囲に及ぼすキャビテーションピーニングの影響2013
- Author(s)
  左奈田一将,高桑脩,祖山均
- Organizer
  日本機械学会東北支部第48期総会・講演会
- Place of Presentation
  仙台
- Year and Date
  2013-03-15
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] ステンレス鋼の下限界応力拡大係数範囲に及ぼすショットピーニングの影響2013
- Author(s)
  内藤暁馬，髙桑脩，祖山均
- Organizer
  日本機械学会東北支部第49期秋季講演会
- Place of Presentation
  盛岡
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 生体材料用チタン合金へのキャビテーション噴流の適用2012
- Author(s)
  高桑脩,祖山均
- Organizer
  キャビテーションに関するシンポジウム(第16回)
- Place of Presentation
  野々市
- Year and Date
  2012-11-24
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] Effect of Nozzle Shape for High Injection Pressure on Aggressivity of Cavitating Jet2012
- Author(s)
  H. Soyama, O. Takakuwa and A. Naito
- Organizer
  21^<st> International Conference on Water Jetting
- Place of Presentation
  オタワ,カナダ
- Year and Date
  2012-09-20
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] Reduction of Hydrogen Embrittlement Cracking of Stainless Steel SUS316L by Cavitation Peening
- Author(s)
  H.Soyama and O.Takakuwa
- Organizer
  International Congress (APCF/SIF-2014)
- Place of Presentation
  シドニー，オーストラリア
- Year and Date
  2014-12-09 – 2014-12-12
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] キャビテーションピーニングを用いた残留応力改善によるステンレス鋼の水素脆化抑止
- Author(s)
  祖山均，髙桑脩
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島大学，福島
- Year and Date
  2014-07-19 – 2014-07-21
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] Effect of Indentation Load on Vickers Hardness of Austenitic Stainless Steel after Hydrogen Charging
- Author(s)
  O.Takakuwa, Y.Mano and H.Soyama
- Organizer
  ASME 2014 Pressure Vessels & Piping Conference
- Place of Presentation
  アナハイム，アメリカ
- Year and Date
  2014-07-20 – 2014-07-24
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] ステンレス鋼表面層のマクロ歪およびミクロ歪に及ぼす水素の影響
- Author(s)
  眞野　優太，高桑　脩，祖山　均
- Organizer
  日本機械学会東北支部第49期秋季講演会
- Place of Presentation
  岩手大学
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] ステンレス鋼への水素侵入に及ぼす表面仕上げの影響
- Author(s)
  高桑　脩，眞野　優太，祖山　均
- Organizer
  日本機械学会第49期総会・講演会
- Place of Presentation
  東北大学
- Data Source
  KAKENHI-PROJECT-25820001
[Presentation] 気中キャビテーション噴流によるステンレス鋼への水素侵入の抑止
- Author(s)
  髙桑脩，眞野優太
- Organizer
  キャビテーションに関するシンポジウム(第17回)
- Place of Presentation
  東京大学，東京
- Year and Date
  2014-11-20 – 2014-11-21
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] キャビテーションピーニングによるクロムモリブデン鋼SCM435の疲労強度向上
- Author(s)
  髙桑脩，白神哲夫，祖山均
- Organizer
  自動車技術会2014年秋季大会学術講演会
- Place of Presentation
  仙台国際センター，仙台
- Year and Date
  2014-10-22 – 2014-10-24
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] The Interaction between Hydrogen and Surface Stress in Stainless Steel
- Author(s)
  O.Takakuwa, Y.Mano and H.Soyama
- Organizer
  12th International Conference on Material Science and Engineering Technology
- Place of Presentation
  パリ，フランス
- Year and Date
  2014-12-30 – 2014-12-31
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] オーステナイト系ステンレス鋼の水素侵入に及ぼす表面応力の影響とその相互作用
- Author(s)
  髙桑脩，眞野優太，祖山均
- Organizer
  日本機械学会M&M2014材料力学カンファレンス
- Place of Presentation
  福島大学，福島
- Year and Date
  2014-07-19 – 2014-07-21
- Data Source
  KAKENHI-PROJECT-24360040
[Presentation] 水素添加後のオーステナイト系ステンレス鋼表面層のビッカース硬さに対する押込み荷重の影響
- Author(s)
  高桑　脩，眞野　優太，祖山　均
- Organizer
  日本機械学会M&M2013材料力学カンファレンス
- Place of Presentation
  岐阜大学
- Data Source
  KAKENHI-PROJECT-25820001

1. SOYAMA Hitoshi (90211995)

# of Collaborated Projects: 2 results

# of Collaborated Products: 34 results
2. AOYAGI Yoshiteru (70433737)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. IGA Yuka (50375119)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. 平山恭介 (70717743)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
5. 武富紳也 (20608096)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 松本龍介 (80363414)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Takakuwa Osamu 高桑 脩

TAKAKUWA OSAMU 高桑 脩

TAKAKUWA Osamu 髙桑 脩

Research Projects

Research Products

Co-Researchers

Creation of new fracture mechanics incorporating microscopic discrete structures

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Hydrogen/phase transformation-induced cracking: high-resolution X-ray CT with X-ray diffractionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Hydrogen-assisted fatigue crack growth under gaseous environment interpreted by a thermally activated processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

New material creation following biomineralization - Challenge to control lime scale -

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation of hydrogen distribution at vicinity of a crack employing a local strain measurementPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A method to evaluate local hydrogen content near surface using an indentation testPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on Hybrid Peening and Its Application for Suppression of Hydrogen Embrittlement

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

圧子押込み試験による耐水素脆化層評価法の構築Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 水素利用技術集成Vol. 42014

Author(s)

Total Pages

Publisher

Data Source

[Journal Article] Antagonistic fatigue crack acceleration/deceleration phenomena in Ni-based superalloy 718 under hydrogen-supply2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Experimental verification of the hydrogen concentration around a crack tip using spot X-ray diffraction2016

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Improvement of delayed fracture resistance on chrome molybdenum steel bolt by cavitation peening2016

Author(s)

Journal Title

DOI

NAID

ISSN

Language

Data Source

[Journal Article] Evaluation of hydrogen content in the surface layer of austenitic stainless steel by means of micro-indentation test with a spherical indenter2015

Author(s)

Journal Title

Takakuwa Osamu 高桑脩

TAKAKUWA OSAMU 高桑脩

TAKAKUWA Osamu 髙桑脩