KUROSAKI Yasuo 黒崎晏夫

… Alternative Names

KUROSAKI Y 黒崎晏夫

黒崎晏夫クロサキヤスオ

Less

Researcher Number	70016442
External Links
Affiliation (based on the past Project Information) *help	2009 – 2011: The University of Electro-Communications, 産学官連携センター, 特任教授 2005 – 2008: 電気通信大学, 共同研究センター, 客員教授 1997 – 1998: 電気通信大学, 電気通信学部, 教授 1988 – 1996: 東京工業大学, 工学部, 教授 1990: Tokyo Institute of Technology, Faculty of Engineering, Professor, 工学部・生産機械工学科, 教授 1989: Professor, Dept. Mech. Eng. for Production, Tokyo Institute of Technology, 工学部 1985: 東京工業大学, 工, 教授
Review Section/Research Field	Principal Investigator Thermal engineering / Thermal engineering Except Principal Investigator Thermal engineering
Keywords	Principal Investigator 射出成形 / 残留複屈折 / 高分子材料 / 伝熱制御 / CO2レーザー / ヒートシンク / 熱伝導 / ふく射 / 能動的制御 / 過冷却解除 … More / 冷却制御 / 成形限界 / 表面転写性 / 超高精度成形技術 / フローマーク / Pneumatic Conveyance / Cold Energy / 気体搬送 / 冷熱 / Quality Improvement / Heat Transfer Control / Injection Molding / 射出成形法 / ひけ / 高品位化 / 高分子射出成形 / 流動層 / ふく射伝熱 / 固気二相流 / マイクロ波励振 / 交流電場加振 / 微小液滴 / 潜熱蓄熱 / Freezing of Supercooled PCM / Spherical Capsule / Utilization of Latent Heat / 冷熱損失 / ポンプ動力 / 空気搬送 / 小球カプセル / 冷熱輸送 / カプセル / 潜熱利用 / Mass Transfer / Optical Visualization / Direct Contact Heat Exchange / Structure of Heat Transfer Augmentation / Fluidized-Bed-Type Heat Exchanger / 光学的測定 / 接触頻度 / 接触時間 / 接触熱交換 / 物質伝達 / 光学的可視化 / 接触熱伝導 / 伝熱促進機構 / 流動層熱交換器 / butt welding / plastics / heat sink / thermal conduction / radiation / CO2 laser / 突合せ溶着 / レーザー溶着 / 樹脂溶着 / 表面冷却 / 赤外線透過財 / 樹脂接合 / 突き合わせ溶着 / プラスチック / 放射 / Cooling Control / Flow Mark / Molding Limit / Surface Transcribability / Biretringence / Super Precision Molding Technique / Skin Layer / 光学的計測 / 高精度成形技術 / 残留福屈折 / 表面固化層 / Flow Length / Transcription Ability / Birefringence / Zinc-selenide / Radiation Absorption Coefficient / Radiation / Injection Molding Process / Polymer Materials / 炭酸ガスレーザー / YAGレーザー / ふく射エネルギー / 樹脂充填性 / 薄肉成形品 / 耐熱ガラス / ハロゲンランプ / 赤外ふく射エネルギ / 流動長さ / 転写性 / 複屈折 / ジンクセレン / ふく射吸収係数 / Absorption Coefficient / Lowering of Transcribability / Short-Shot Phenomenon / Residual Birefringence / Radiation Heating / Injection-Molding of Polymer / 粘着力 / 固化層 / 高品質か / 吸収特性 / 転写不良 / 充填不良 / ふく射加熱 / Brine-Ice Mixture / Freezing Preservation of Organism / Supercooling / Microchannels / Utilization / Conveyance / Storage / Phase-Change Phenomena / 冷エネルギー / 凍結保存 / 固液二相流 / 分子動力学法 / 過冷却現象 / 液状氷 / 生体の凍結保存 / 過冷却 / マイクロチャンネル / 保存・輸送・利用 / 相変化 / Magnetic Fields / Electric / Radiation Heat Transfer / Fiber-Reinforced Composite Materials / Steel Casting / Semiconductor Materials / Polymeric Materials / Active Control / Solidification Process / スラブ温度分布平坦化 / 遷臨界流体 / 単結晶製造 / ミクロ・マクロ解析法 / 樹脂・壁面間熱伝達率 / 高分子鎖配向 / 凝固現象 / 高精度計測 / 繊維強化複合材料の熱物性 / 衝突噴流熱伝達 / 液体金属の融液振動 / 非線形EHD対流 / 樹脂・金型界面熱抵抗 / 炭酸ガスレーザ照射 / 連続鋳造スラブ / 単結晶成長 / 複雑断面繊維 / 高分子射出成形品 / 電場・磁場 / 繊維強化複合材料 / 鉄鋼材料 / 半導体材料 / 凝固過程 / Rheological Approach / Molecular Orientation / Residual Stress / Sink-Mark / 非接触温度計測 / 樹脂物性の圧力依存性 / 保圧過程 / 粘弾性挙動 / 残留応力・分子配向 / ひけ位置 / 粘弾性解析 / 分子配向 / 残留応力 / Control of Void Fraction / Circulating Fluidized Particle Cell / IR Thermography / CO_2 Laser Heating / Radiative Penetration Depth / Radiation Properties of Fluidized Particles / Radiative Heat Transfer / High-Temperature Gas-Solid Suspension Flow / ふく射伝播機構 / 伝熱促進 / 空隙率 / 粒子挙動 / 空隙率の能動的制御 / セル内循環流動層 / サーモグラフィ / 赤外線加熱 / ふく射浸透距離 / 粒子群ふく射特性 / 高温固気二相流 / 追従遅れ / 流量変化 / ステップ状加熱 / 静定時間 / 衝突噴流 / フィン効率 / 壁面熱伝導 / 時間的非均一 / 空間的非均一 / ガス冷却 / Tm:ファイバーレーザ / ツリウムファイバーレーザ / 不織布 / 熱可塑性樹脂 / 光透過ヒートシンク / 赤外線輻射加熱 / CO2レーザ / 赤外線レーザ / ポーラス樹脂 / オレフィン樹脂 / COレーザー / フッ素樹脂 / 針状結晶 / 静電力 / 凍結制御 / 加振による変形 / 過冷却液滴 … More Except Principal Investigator 加工 / 伝熱 / 分子熱工学 / 製造 / 新素材 / 材料 / Ultra-high precision processing / Rapid solidification / Processing / Manufacturing / New materials / Microscale / Heat transfer / 超精密加工 / 急冷凝固 / ミクロ / 製造・加工 / 相変化 / ミクロスケール / Ozonizer / Reacting plasma / Porous medium / Sub-cooling / Joule-Thomson effect / Agglomeration phenomena / Critical opalescence / Critical phenomena / オゾナイザ- / オゾナイザー / 反応性プラズマ / 多孔性媒体 / 過冷却 / Joule-Thomson効果 / 凝集現象 / 臨界蛋白光 / 臨界現象 / Control of Thermophysical Properties / Combustion Control, / Boiling Control, / High Temperature System, / Solidification and Melting / Flow Separation Control / Heat Transfer Control, / 凝固・融解 / 熱物性制御 / 燃焼制御 / 沸騰制御 / 高温複合系 / 凝固融解 / はく離制御 / 伝熱制御 / 物質移動 / ミクロ現象 / 材料プロセス / 材料製造 / ブラズマディスラプション / 寿命評価 / 熱構造解析 / 高熱負荷 / ブランケット / リミター / ダイバータ / 第一壁 / 核融合炉 Less

A study on CO2 laser welding of porous plastics assisted by heat transfer control using a sold heat sinkPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  The University of Electro-Communications
A Study on CO Laser Welding of Hard-to-joint Plastics Assisted by a New Heat Transfer Technique using a Transparent Solid Heat SinkPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  The University of Electro-Communications
A Study on CO2 Laser Butt Welding of Plastics by Heat Transfer Control Using a Heat SinkPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Thermal engineering
- Research Institution
  The University of Electro-Communications
Pheology and Heat Transfer Control of Microscale Instability Phenomena on Injection Molded Polymer SurfacesPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  UNIVERSITY OF ELECTRO-COMMUNICATIONS
A Study of Super Precise Injection Molding Technique Assisted by Radiation EnergyPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1996 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  THE UNIVERSITY OF ELECTRO-COMMUNICATIONS
  Tokyo Institute of Technology
Synthetic Study on the Techniques for Storage/Conveyance/Utilization of Cold Energy using Phase-Change PhenomenaPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
Study on Quality Improvement Techniques for Injection-Molding of Polymer Utilizing Heat Transfer ControlPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
DEVELOPMENT OF MICRO HEAT TRANSFER IN MANUFACTURING AND PROCESSING OF NEW MATERIALS
- Principal Investigator
  
  TANASAWA Ichiro
- Project Period (FY)
  1993 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  TOKYO UNIVERSITY OF AGRICULTURE AND TECHNOLOGY
  The University of Tokyo
HIGH-PRECISION MEASUREMENT AND ACTIVE CONTROL OF SOLIDIFICATIONPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1993 – 1995
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  TOKYO INSTITUTE OF TECHNOLOGY
共振現象を利用した過冷却微小液摘の凍結の能動的制御Principal Investigator
- Principal Investigator
  
  黒崎晏夫
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
新素材の製造・加工技術にかかわるミクロ伝熱工学の展開
- Principal Investigator
  
  棚沢一郎
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for Co-operative Research (B)
- Research Institution
  The University of Tokyo
共振現象を利用した過冷却微小液滴の凍結の能動的制御Principal Investigator
- Principal Investigator
  
  黒崎晏夫
- Project Period (FY)
  1991
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Tokyo Institute of Technology
A Comprehensive Study on the Scientific Principles of Critical and Agglomeration in Thermal Engineering
- Principal Investigator
  
  ECHIGO Ryozo
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Effects of Properties and Behavior of Particles Laden with High Temperature Gas Flow on the Heat Transfer Augmentation and ControlPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
Technologies for Quality Improvement of the Injection Molded Polymer Products Utilizing the Heat Transfer Control TechniquePrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
重点領域研究「新材料の製造・加工・処理に関する伝熱工学的研究」の準備研究
- Principal Investigator
  
  TANASAWA Ichiro
- Project Period (FY)
  1990
- Research Category
  
  Grant-in-Aid for Co-operative Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  The University of Tokyo
高出力密度核融合炉の高熱負荷壁の熱構造システム
- Principal Investigator
  
  宮健三
- Project Period (FY)
  1989
- Research Category
  
  Grant-in-Aid for Fusion Research
- Research Institution
  The University of Tokyo
Research on Heat Transfer Control
- Principal Investigator
  
  AIHARA T
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  Thermal engineering
- Research Institution
  Tohoku University
STUDY ON MICRO-SCALE STRUCTURE OF HEAT TRANSFER AUGMENTATION FOR FLUIDIZED-BED-TYPE HEAT EXCHANGERPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
STUDY ON PNEUMATIC CONVEYANCE OF COLD ENERGY USING A PHASE-CHANGE MATERIAL ENCLOSED IN SMALL SPHERICAL CAPSULESPrincipal Investigator
- Principal Investigator
  
  KUROSAKI Yasuo
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  Thermal engineering
- Research Institution
  Tokyo Institute of Technology
空間的・時間的に非均一な高熱負荷の第一冷却壁のガス冷却に関する研究Principal Investigator
- Principal Investigator
  
  黒崎晏夫
- Project Period (FY)
  1985
- Research Category
  
  Grant-in-Aid for Fusion Research
- Research Institution
  Tokyo Institute of Technology

All 2011 2010 2009 2008 2007 2006 2005

All Journal Article Presentation

[Journal Article] 伝熱工学の将来展望への一見解(生産技術への寄与からの展望)2006
- Author(s)
  黒崎晏夫
- Journal Title
  
  第43回日本伝熱シンポジウム講演論文集 I
  
  Pages: 83-84
- Data Source
  KAKENHI-PROJECT-17560175
[Journal Article] 赤外線放射利用によるプラスチック新溶接法の開発 (透明固体ヒートシンク利用による表面損傷の回避)2006
- Author(s)
  黒崎晏夫, 又吉智也, 佐藤公俊
- Journal Title
  
  第43回日本伝熱シンポジウム講演論文集 I
  
  Pages: 105-106
- Data Source
  KAKENHI-PROJECT-17560175
[Journal Article] A Novel CO2 laser Welding of Plastics Using a Transparent Solid Heat Sink without Causing Thermal Damage2006
- Author(s)
  Y.Kurosaki, T.Matayoshi, K.Sato
- Journal Title
  
  25^<th> International Congress on Applicaticns of Lasers ＆ Electro-Optics (CD-ROM)
  
  Pages: 75-75
- Data Source
  KAKENHI-PROJECT-17560175
[Journal Article] Radiative heat transfer in plastic welding process2005
- Author(s)
  Yasuo Kurosaki
- Journal Title
  
  Journal of Quantitative Spectroscopy & Radiative Transfer 93
  
  Pages: 25-41
- Data Source
  KAKENHI-PROJECT-17560175
[Journal Article] A Novel CO2 laser welding of natural thermoplastics using a solid heat sink without causing surface thermal damage2005
- Author(s)
  Y.Kurosaki, T.Matayoshi, K.Sato
- Journal Title
  
  Proceeding of Joining of Medical Plastics Conference (CD-ROM)
- Data Source
  KAKENHI-PROJECT-17560175
[Presentation] LASER WELDING OF FLUORPLASTICS ASSISTED BY A SOLID HEATSINK TRANSPARENT TO INFRAREDRADIATION-UTILIZING A CO LASERAND NONDISTRUCTIVE EVALUATION-2011
- Author(s)
  Kimitoshi Sato, Takuhei Oosawa and Yaasuo Kurosaki
- Organizer
  Asian Workshop on Polymer Processing in China 2011
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] 不織布のレーザ溶着-赤外線透過固体ヒートシンクによる表面損傷低減化-2010
- Author(s)
  橋爪郁博、宮原仁、佐藤慎也、佐藤公俊、黒崎晏夫
- Organizer
  成形加工シンポジア' 10
- Place of Presentation
  神戸大学
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] A fiber laser welding of plastics assisted by a transparent solid heat sink to prevent the surface thermal damage2010
- Author(s)
  Yasuo Kurosaki
- Organizer
  LANE2010
- Place of Presentation
  Erlsngen大学, Erlangen、ドイツ
- Year and Date
  2010-09-22
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] A FIBER LASER WELDING OFPLASTICS ASSISTED BY A TRANSPARENTSOLID HEAT SINK TO PREVENT THESURFACE THERMAL DAMAGE2010
- Author(s)
  YasuoKurosaki
- Organizer
  LANE2010
- Place of Presentation
  Erlangen, Germany
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] Fiber laser welding of plastics avoidingthermal damage with a solid heat sink transparentto laser beam2010
- Author(s)
  Yasuo Kurosaki, Kimitoshi Sato
- Organizer
  ANTEC2010
- Place of Presentation
  Orlando, Florida, USA
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] CO2 Laser Welding of the PFA Disk Top on a Circular Tube Assisted by a Transparent Solid Heat Sink2009
- Author(s)
  Yasuo Kurosaki
- Organizer
  ANTEC2009, Society of Plastic Engineers
- Place of Presentation
  McCormick place,シカゴ、米国
- Year and Date
  2009-06-23
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] Fiber laser welding of plastics avoiding thermal damage with a solid heat sink transparent to laser beam2009
- Author(s)
  Yasuo Kurosaki
- Organizer
  ANTEC2010, Society of Plastic Engineers
- Place of Presentation
  マリオット会議場、オーランド、米国
- Year and Date
  2009-05-16
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] The CO laser welding of polyorefin and fluorocarbon polymers without surface thermal damage assisted by a transparent solid heat sink2009
- Author(s)
  Yasuo Kurosaki
- Organizer
  PPS Europe/Africa Regional Meeting 2009, Polymer Processing Society
- Place of Presentation
  Golden Bay Hotel,ラルナカ、キプロス
- Year and Date
  2009-10-20
- Data Source
  KAKENHI-PROJECT-21560203
[Presentation] CO Laser Welding of Polyolefin and Fluorocarbon Polymers without Surface Thermal Damage Assisted by a Transparent Solid Heat Sink2008
- Author(s)
  Yasuo Kurosaki and Naoki Shimizu
- Organizer
  Polymer Processing Society Americas Regional Meeting 2008
- Place of Presentation
  Charleston, South Carolina, USA
- Year and Date
  2008-10-27
- Data Source
  KAKENHI-PROJECT-19560196
[Presentation] A CO Laser Welding of Plastics without Surface Thermal Damage Assisted by a Transparent Solid Heat Sink2007
- Author(s)
  黒崎晏夫
- Organizer
  Advanced Laser Applications Conference & Exposition (ALAC2007)
- Place of Presentation
  アメリカ合衆国・ボストン
- Data Source
  KAKENHI-PROJECT-19560196

1. SATOH Isao (10170721)

# of Collaborated Projects: 11 results

# of Collaborated Products: 0 results
2. YAMADA Jun (40210455)

# of Collaborated Projects: 9 results

# of Collaborated Products: 0 results
3. AIHARA T (90006172)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. KOTAKE Susumu (30013642)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
5. TANASAWA Ichiro (30013105)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. FUKUSAKO Shoitiro (00001785)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
7. SHIGEFUMI Nishio (00111568)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
8. SATO Kimitoshi (80313419)

# of Collaborated Projects: 3 results

# of Collaborated Products: 3 results
9. TODA S (60005387)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. OHNAKA Itsuo (00029092)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. FUSHINOBU Kazuyoshi (50280996)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. KANAI Toshitaka

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. SAITOH T (80064161)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. OHTA T (00006678)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. NAGAI N (90005231)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. ECHIGO Ryozo (70037737)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. NAGASIMA Akira (80051514)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. NISHIWAKI Nobuhiko (90016626)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. HATTORI Masaru (70016426)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. ICHIMIYA Koichi (30037923)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. OZOE Hiroyuki (10033242)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. MAEKAWA Toru (40165634)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. KIKUTANI Takeshi (70153046)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. HAYASHI Yujiro (30019765)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. SAITO Akio (40020432)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. NAKAYAMA Wataru (50221461)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. TAKEUCHI Masaaki (70163384)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. UCHIDA Yutaka (00017336)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 宮健三 (30011191)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 宮崎慶次 (40029202)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. 成合英樹 (70134210)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. 井上晃 (20016851)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. 今石宣之 (60034394)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. 増田英俊 (00006181)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. 横井秀俊 (90166869)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. NISHIO Taichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

KUROSAKI Yasuo 黒崎 晏夫

KUROSAKI Y 黒崎 晏夫

黒崎 晏夫 クロサキ ヤスオ

Research Projects

Research Products

Co-Researchers

A study on CO2 laser welding of porous plastics assisted by heat transfer control using a sold heat sinkPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on CO Laser Welding of Hard-to-joint Plastics Assisted by a New Heat Transfer Technique using a Transparent Solid Heat SinkPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on CO2 Laser Butt Welding of Plastics by Heat Transfer Control Using a Heat SinkPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Pheology and Heat Transfer Control of Microscale Instability Phenomena on Injection Molded Polymer SurfacesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study of Super Precise Injection Molding Technique Assisted by Radiation EnergyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Synthetic Study on the Techniques for Storage/Conveyance/Utilization of Cold Energy using Phase-Change PhenomenaPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Quality Improvement Techniques for Injection-Molding of Polymer Utilizing Heat Transfer ControlPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

DEVELOPMENT OF MICRO HEAT TRANSFER IN MANUFACTURING AND PROCESSING OF NEW MATERIALS

Principal Investigator

Project Period (FY)

Research Category

Research Institution

HIGH-PRECISION MEASUREMENT AND ACTIVE CONTROL OF SOLIDIFICATIONPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

共振現象を利用した過冷却微小液摘の凍結の能動的制御Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

新素材の製造・加工技術にかかわるミクロ伝熱工学の展開

Principal Investigator

Project Period (FY)

Research Category

Research Institution

共振現象を利用した過冷却微小液滴の凍結の能動的制御Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

A Comprehensive Study on the Scientific Principles of Critical and Agglomeration in Thermal Engineering

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Effects of Properties and Behavior of Particles Laden with High Temperature Gas Flow on the Heat Transfer Augmentation and ControlPrincipal Investigator

KUROSAKI Yasuo 黒崎晏夫

KUROSAKI Y 黒崎晏夫

黒崎晏夫クロサキヤスオ