KANADA Tsugunori 金田嗣教

Researcher Number	70040756
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2003 – 2006: 大分工業高等専門学校, 制御情報工学科, 教授 2002 – 2004: 大分工業高等専門学校, 教授 1996 – 2001: 大分工業高等専門学校, 制御情報工学科, 教授 1998: 大分工業高等専門学校制御情報工学科, 教授
Review Section/Research Field	Principal Investigator Engineering fundamentals / Structural/Functional materials Except Principal Investigator Measurement engineering / Measurement engineering / 計測・制御工学 / Materials/Mechanics of materials
Keywords	Principal Investigator Hot Vapor / SMA Wire / Display / Rotational Torque / Shape Recovery Force / Drive System / Large and Small Pulley / Shape Memory Alloy / ドライブシステム / ワイヤ … More / 乗用車 / 高温蒸気 / 形状記憶合金ワイヤ / ディスプレイ / 回転トルク / 形状回復力 / 駆動装置 / 大小のプーリ / 形状記憶合金 / Ribbon / Sheet / Slant type SMA / Heat treatment / Oxidation / Magnetite / Shape memory alloy / Shape memory effect / 応力誘起型マルテンサイト / 熱弾性型マルテンサイト / 傾斜型形状記憶効果 / リボン試料 / マグネタイト / マルテンサイト / オーステナイト / 形状記憶効果 / Fe-Mn系合金 … More Except Principal Investigator SUS304 / 非破壊検査 / 平面曲げ疲労 / オーステナイト / 裏側欠陥 / 磁気探傷 / Fatigue Damage / Bending Stress / Martensite / Austenite / Excitation Type Magnetic Sensor / Non-destructive Evaluation / 透磁率 / SUS316 / マルテンサイト変態 / 渦電流 / Magnetic sensor / Non-destructive evaluation / 疲労推定 / マルテンサイト / 形状推定 / 回転磁束 / Eddy Current / 磁性 / 材料劣化 / 磁気センサ / 垂直残留磁化 / 励磁コイル / 疲労被害 / 励磁型磁気センサ / Rare earth element / Shape memory alloy / Martensitic transformation / Melt spinning technique / High permeability / Ferromagnetic material / Shape memory effect / 希土類元素 / 形状記憶合金 / 超急冷 / 高透磁率 / 強磁性体 / 形状記憶効果 / FG magnetic sensor / MI element / Natural crack / Bending stress / Fatigue / Hybrid magnetic sensor / 欠陥属性推定 / 勾配磁気センサ / 余寿命 / SS400 / FG型磁気センサ / MI素子 / Estimation of a defect shape / Reverse-side defect / Estimation of fatigue / Barkhousen noise / Rotational magnetic flux / バルクハウゼンノイズ / 磁気深傷 / クラック / 残留磁化 / FC磁気センサ / リサージュ波形 / サーチコイル Less

A Car Using Shape Memory AlloyPrincipal Investigator
- Principal Investigator
  
  KANADA Tsugunori
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Engineering fundamentals
- Research Institution
  Oita National College of Technology
Development of Fatigue Evaluation System for Structural Metallic Material Using the Eddy Current Type High Sensitivity Magnetic Sensor
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Development of Nondestructive Evaluation System Using the Excitation Type High Sensitivity Magnetic Sensor to Ddetect Fatigue Damage of Metallic Material
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Research on Development of Ferromagnetic Shape Memory Alloy
- Principal Investigator
  
  TODAKA Takashi
- Project Period (FY)
  2002 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  OITA UNIVERSITY
構造用金属材の磁気的特性の変化を利用した新しい余寿命推定法の構築
- Principal Investigator
  
  岡茂八郎
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
Development of Non-destructive Evaluation System Using the Hybrid Magnetic Sensor for Natural Cracks on a Reverse-side of thick metallic Plates
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Measurement engineering
- Research Institution
  Oita National College of Technology
A NEW COMPOSITE FUNCTIONAL MATERIAL・ DEVELOPMENT OF MAGNETIC SHAPE MEMORY ALLOYPrincipal Investigator
- Principal Investigator
  
  KANADA Tsugunori
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  OITA NATIONAL COLLEGE OF TECHNOLOGY
Development of The High Grade Magnetic Diagnosis System Using The New Rotational Magnetic Flux Sensor for Non-destructive Testing
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  計測・制御工学
- Research Institution
  Oita National College of Technology
新しい回転磁束形磁気センサーによる構造用金属材料の亀裂探査システム構築に関する研究
- Principal Investigator
  
  OKA Mohachiro
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  計測・制御工学
- Research Institution
  Oita National College of Technology

All 2007 2006 2005 2001

All Journal Article

[Journal Article] A new drive system using a SMA wire and applications2007
- Author(s)
  Kenji OBAYASHI, Toshie TAKEISHI, Tsugunori KANADA
- Journal Title
  
  Proceedings of the 9th Japan-Korea Joint Symposium on the Applied Electromagnetics
  
  Pages: 21-22
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] Drive system using a shape memory alloy2006
- Author(s)
  T.Kanada, K.Yamasaki, K.Miyagawa
- Journal Title
  
  Journal of advanced science 18巻・1＆2号
  
  Pages: 74-77
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] Drive system using a shape memory alloy wire2006
- Author(s)
  Tsugunori Kanada, Katsuou Yamasaki, Keitaro Miyagawa
- Journal Title
  
  Oita University-Seoul University Joint Symposium on Applied Electromagnetics
  
  Pages: 41-42
- NAID
  10017410452
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] 専攻科プロジェクト実験:形状記憶合金を使った動力装置2006
- Author(s)
  金田嗣教, 山崎勝翁
- Journal Title
  
  高専教育 29
  
  Pages: 77-81
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] Advanced course project experiment : Drive system using a shape memory alloy2006
- Author(s)
  Tsugunori Kanada, Katsuou Yamasaki
- Journal Title
  
  Education of national college of technology Vol.29
  
  Pages: 77-81
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] 専攻科プロジェクト実験 : 形状記憶合金を使った乗用カー2006
- Author(s)
  金田嗣教, 山崎勝翁
- Journal Title
  
  高専教育 29号
  
  Pages: 77-81
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] Drive system using a shape memory alloy wire2006
- Author(s)
  Tsugunori Kanada, Katsuou Yamasaki, Keitaro Miyagawa
- Journal Title
  
  Journal of advanced science Vol.18,No.1＆2
  
  Pages: 74-77
- NAID
  10017410452
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] 形状記憶合金を使った乗用カー2005
- Author(s)
  金田嗣教, 山崎勝翁
- Journal Title
  
  日本AEM学会誌 13巻・3号
  
  Pages: 251-248
- NAID
  110003829097
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] 形状記憶合金を使った乗用カー2005
- Author(s)
  金田嗣教, 山崎勝翁
- Journal Title
  
  日本AEM学会誌 13巻3号
  
  Pages: 48-51
- NAID
  110003829097
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] A car using a shape memory alloy2005
- Author(s)
  Tsugunori Kanada, Katsuou Yamasaki
- Journal Title
  
  Journal of the Japan society of applied electromagnetics and mechanics Vol.13, No.3
  
  Pages: 251-248
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560055
[Journal Article] Magnetization and Shape Memory Effect in Fe-Mn-Cr-Si Alloy2001
- Author(s)
  M.Szpiyngacz, T.Kanada, M.Enokizono, T.Todaka
- Journal Title
  
  Journal of the Magnetic Society of Japan Vol.25,No.4-2
  
  Pages: 932-934
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-14350060

1. ENOKIZONO Masato (40136784)

# of Collaborated Projects: 8 results

# of Collaborated Products: 1 results
2. OKA Mohachiro (80107838)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
3. YAKUSHIJI Terutoshi (90210228)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. TODAKA Takashi (50163994)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
5. TSUCHIDA Yuji (80284785)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

KANADA Tsugunori 金田 嗣教

Research Projects

Research Products

Co-Researchers

A Car Using Shape Memory AlloyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Fatigue Evaluation System for Structural Metallic Material Using the Eddy Current Type High Sensitivity Magnetic Sensor

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Nondestructive Evaluation System Using the Excitation Type High Sensitivity Magnetic Sensor to Ddetect Fatigue Damage of Metallic Material

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on Development of Ferromagnetic Shape Memory Alloy

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

構造用金属材の磁気的特性の変化を利用した新しい余寿命推定法の構築

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Non-destructive Evaluation System Using the Hybrid Magnetic Sensor for Natural Cracks on a Reverse-side of thick metallic Plates

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A NEW COMPOSITE FUNCTIONAL MATERIAL・ DEVELOPMENT OF MAGNETIC SHAPE MEMORY ALLOYPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of The High Grade Magnetic Diagnosis System Using The New Rotational Magnetic Flux Sensor for Non-destructive Testing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

新しい回転磁束形磁気センサーによる構造用金属材料の亀裂探査システム構築に関する研究

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] A new drive system using a SMA wire and applications2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] Drive system using a shape memory alloy2006

Author(s)

Journal Title

Description

Data Source

[Journal Article] Drive system using a shape memory alloy wire2006

Author(s)

Journal Title

NAID

Description

Data Source

[Journal Article] 専攻科プロジェクト実験:形状記憶合金を使った動力装置2006

Author(s)

Journal Title

Data Source

[Journal Article] Advanced course project experiment : Drive system using a shape memory alloy2006

Author(s)

KANADA Tsugunori 金田嗣教