SHIMBO Minoru 新保實

… Alternative Names

新保實

Less

Researcher Number	70142552
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2007 – 2008: Kanazawa Institute of Technology, 工学部, 教授 2004 – 2005: 金沢工業大学, 工学部, 教授 1998 – 1999: 金沢工業大学, 工学部, 教授 1989 – 1991: 金沢工業大学, 工学部, 助教授 1986: 金沢工業大学, 工学部, 講師
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials Except Principal Investigator 材料力学
Keywords	Principal Investigator 発泡プラスチック / 発泡温度 / 減圧時間 / 気泡数 / 気泡径 / Time-temperature eauivalency / Viscoelastic behavior / Foaming temperature / Decompression time / Foaming time … More / Cell size / Cell number / Foamed plastics / 気泡密度 / 発砲プラスチック / 物理的発泡剤 / 時間-温度換算則 / 粘弾性挙動 / 発泡時間 / Processing Technology / Supper critical fluid gas / Microcellular Plastics / Foam plastics / 成形プロセス / 超臨界流体 / マイクロセルラープラスチック / 含浸圧力 / 強度特性 / スキン層 / 微小繊維 / 分子配向 … More Except Principal Investigator safety index / reliability / simulator for failure / failure probability / mechanism of failure / multiple layer laminate / stochastic materials design / fiber reinforced composite laminates / 信頼性指標 / TsaiーWu則 / 積層配向角 / 面内多軸荷重 / 二次多項式破損則 / 一方向強化積層板 / 材料設計 / 最適設計 / 強度信頼性 / 信頼性 / 破損確率 / 温度依存性 / 時間依存性 / 破損シミュレ-タ / 設計定式化 / 破損メカニズム / 多層積層板 / 確率材料設計法 / 繊維強化複合材料積層板 / 疲労強度 / 低サイクル疲労 / ハイブリッド / アラミド繊維強化プラスチックス / カーボン繊維強化プラスチックス Less

On factors improved strength of foamed plasticsPrincipal Investigator
- Principal Investigator
  
  SHIMBO Minoru
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kanazawa Institute of Technology
Time and Temperature Dependence of Cell Number and Cell Size of Foamed PlasticsPrincipal Investigator
- Principal Investigator
  
  SHIMBO Minoru
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  KANAZAWA INSTITUTE OF TECHNOLOGY
Processing Technology of Sub-micron Cellular StructurePrincipal Investigator
- Principal Investigator
  
  SHIMBO Minoru
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kanazawa Institute of Technology
Stochastic Materials Design of Fiber Reinforced Composite Laminates
- Principal Investigator
  
  MIYANO Yasushi
- Project Period (FY)
  1989 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  材料力学
- Research Institution
  Kanazawa Institute of Technology
カーボン/アラミドハイブリッドFRP積層板の疲労挙動の解明
- Principal Investigator
  
  MIYANO Yasushi
- Project Period (FY)
  1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  材料力学
- Research Institution
  Kanazawa Institute of Technology

All 2009 2008 2007 2005

All Journal Article Presentation Book

[Book] "発泡成形"2008
- Author(s)
  新保實,他
- Publisher
  情報機構
- Data Source
  KAKENHI-PROJECT-19560101
[Book] 発泡成形2008
- Author(s)
  新保實, 他数名
- Total Pages
  526
- Publisher
  情報機構
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] "発泡プラスチックの強度特性に及ぼすスキン層の効果"2009
- Author(s)
  新保實,中野晋,三澤章博
- Journal Title
  
  材料システム第27 巻
  
  Pages: 49-53
- NAID
  130007987261
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] 発泡プラスチックの内部構造と強度特性に及ぼす微小繊維の効果2008
- Author(s)
  新保實, 谷口翔, 金原勲, 三尊章博
- Journal Title
  
  成形加工 20
  
  Pages: 201-206
- NAID
  10023959368
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] "物理的発泡剤を用いたシリコーンゴムの発泡成形プロセスに関する研究"2008
- Author(s)
  新保實,中野晋,三澤章博,福村功昌
- Journal Title
  
  材料システム第26 巻
  
  Pages: 17-22
- NAID
  130007987129
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] 発泡体の気泡密度に及ぼす減圧過程における減圧時間と含浸温度の影響2007
- Author(s)
  中野晋、新保實
- Journal Title
  
  成形加工 19
  
  Pages: 725-729
- NAID
  10023958743
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] "発泡体の気泡密度に及ぼす減圧過程における減圧時間と含浸温度の影響"2007
- Author(s)
  中野晋、新保實
- Journal Title
  
  成形加工第19 巻
  
  Pages: 725-729
- NAID
  10023958743
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] Effect of Saturation Pressure on Equivalency of Decompression Time and Foaming Temperature on Cell Density of Foamed Polystyrene2007
- Author(s)
  S. Nakano, M. Shimbo, A. Misawa
- Journal Title
  
  Cellular Polymers 26
  
  Pages: 295-304
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] Misawa,"Effect of Saturation Pressure on Equivalency of Decompression Time and Foaming Temperature on Cell Density of Foamed Polystyrene"2007
- Author(s)
  S.Nakano,M.Shimbo,A.Misawa
- Journal Title
  
  Cellular Polymers vol.26
  
  Pages: 295-304
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560101
[Journal Article] 気泡密度に関する減圧時間と発泡温度の相関関係2005
- Author(s)
  村谷圭市, 新保寛
- Journal Title
  
  成形加工 17・6
  
  Pages: 401-406
- NAID
  10016931872
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Estimation of Cell Size and Cell Density of Foamed Plastics based on Time-Temperature Equivalent Law2005
- Author(s)
  S.Nakano, K.Muratani, M.Shimbo
- Journal Title
  
  Proc. 5^<th> International Conference on Mechanics of Time Dependent Materials, SEM
  
  Pages: 45-48
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Equivalency of Foaming Temperature and Time about Cell Density of Foamed Polystyrene2005
- Author(s)
  K.Muratani, S.Nakano, M.shimbo
- Journal Title
  
  Proc.of 21^<st> Annual Meeting of PPS, No. SL 15.7
  
  Pages: 1-8
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Simulation and Experiments for Temperature and Pressure Release Rate Superposition Principal in Physical Polymeric Foaming2005
- Author(s)
  H.Ogawa, K.taki, K.muratani, M.Shimbo, M.Ohshima
- Journal Title
  
  Proc.of 21^<st> Annual Meeting of PPS, No. SL 15.2
  
  Pages: 1-18
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Correlation of Decompression Time and Foaming Temperature on the Cell Density of Foamed Polystyrene2005
- Author(s)
  K.Muratani, M.Shimbo, Y.Miyano
- Journal Title
  
  Cellular Polymer Vo1.24, No.1
  
  Pages: 15-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Equivalency of Foaming Temperature and Time about Cell Density of Foamed Polystyrene2005
- Author(s)
  K.Muratani, S.Nakano, M.Shimbo
- Journal Title
  
  Proc.of 21^<st> Annual Meeting of PPS No.SL 15.7
  
  Pages: 1-8
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Simulation and Experiments for Temperature and Pressure Release Rate Superposition Principal in Physical Polymeric Foaming2005
- Author(s)
  H.Ogawa, K.Taki, K.Muratani, M.Shimbo, M.Ohshima
- Journal Title
  
  Proc.of 21^<st> Annual Meeting of PPS No.SL 15.2
  
  Pages: 1-8
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Equivalency of Decompression time and Foaming Temperature of Foamed Plastics2005
- Author(s)
  K.Muratani, M.Shimbo
- Journal Title
  
  Seikei Kakou (in Japanese) Vo1.17, No.6
  
  Pages: 401-406
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] 気泡密度に関する減圧時間と発砲温度の相関関係2005
- Author(s)
  村谷圭市, 新保實
- Journal Title
  
  成形加工 17・6
  
  Pages: 401-406
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Equivalency of Foaming Time and Temperature about Cell Size and Density of Foamed Plastics2005
- Author(s)
  K.Muratni, S.Nakano, M.Shimbo
- Journal Title
  
  Seikei kakou (in Japanese) Vol.17, No.11
  
  Pages: 715-720
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Estimation of Cell Size and Cell Density of Foamed Plastics based on Time-Temperature Equivalent Law2005
- Author(s)
  S.Nakano, K.Muratani, M.Shimbo
- Journal Title
  
  Proc.5^th International Conference on Mechanics of Time Dependent Materials,SEM
  
  Pages: 45-48
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Estimation of Cell Size and Cell Density of Foamed Plastics based on Time-Temperature Equivalent Law2005
- Author(s)
  S.Nakano, K.Muratani, M.Shimbo
- Journal Title
  
  Proc.5^<th> International Conference on Mechanics of Time Dependent Materials SEM
  
  Pages: 45-48
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Simulation and Experiments for Temperature and Pressure Release Rate Superposition Principal in Physical Polymeric Foaming2005
- Author(s)
  H.Ogawa, K.taki, K.Muratani, M.Shimbo, M.Ohshima
- Journal Title
  
  Proc. of 21^st Annual Meeting of PPS, No. SL 15.2
  
  Pages: 1-18
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] 発泡体の気泡径および気泡密度に関する発泡温度と発泡時間の等価性2005
- Author(s)
  村谷圭市, 中野晋, 新保寛
- Journal Title
  
  成形加工 17・11
  
  Pages: 715-720
- NAID
  10016953892
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Correlation of Decompression Time and Foaming Temperature on the Cell Density of Foamed Polystyrene2005
- Author(s)
  K.Muratani, M.Shimbo, Y.Miyano
- Journal Title
  
  Cellular Polymer 24・1
  
  Pages: 15-27
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] 発砲体の気泡径および気泡密度に関する発泡温と発泡時間の等価性2005
- Author(s)
  村谷圭市, 中野晋, 新保實
- Journal Title
  
  成形加工 17・11
  
  Pages: 715-720
- Data Source
  KAKENHI-PROJECT-16560082
[Journal Article] Equivalency of Foaming Temperature and Time about Cell Density of Foamed Polystyrene2005
- Author(s)
  K.Muratani, S.Nakanoho, M.Shimbo
- Journal Title
  
  Proc. of 21^st Annual Meeting of PPS, No. SL 15.7
  
  Pages: 1-8
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560082
[Presentation] "発泡体の強度特性に及ぼす分子配向の効果"2008
- Author(s)
  吉野光彦,新保實
- Organizer
  成形加工シンポジア'08
- Place of Presentation
  山口
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] 表層発泡体の成形方法と衝撃特性に関する研究2008
- Author(s)
  堀智博, 新保實
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  福井
- Year and Date
  2008-11-01
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] "表層発泡体の成形方法と衝撃特性に関する研究"2008
- Author(s)
  堀智博,新保實
- Organizer
  成形加工シンポジア'08
- Place of Presentation
  山口
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] "発泡成形と発泡体内部構造に及ぼす焼結金型の効果"2008
- Author(s)
  吉田憲政,新保實
- Organizer
  成形加工シンポジア'08
- Place of Presentation
  山口
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] 発泡成形と発泡体内部構造に及ぼす焼結金型の効果2008
- Author(s)
  吉田憲政, 新保實
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  福井
- Year and Date
  2008-11-01
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] 発泡体の強度特性に及ぼす分子配向の効果2008
- Author(s)
  吉野光彦, 新保實
- Organizer
  プラスチック成形加工学会
- Place of Presentation
  福井
- Year and Date
  2008-11-01
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] 発泡プラスチックの内部構造と諸特性に及ぼす圧延効果2007
- Author(s)
  中野晋、西盛正敏、瀬川明夫、新保實
- Organizer
  成形加工学会
- Place of Presentation
  山口
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] "焼結金型を用いた発泡成形と発泡体内部構造"2007
- Author(s)
  吉田憲成,新保實
- Organizer
  成形加工シンポジア
- Place of Presentation
  福井
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] 焼結金型を用いた発泡成形と発泡体内部構造2007
- Author(s)
  吉田憲成、新保實
- Organizer
  成形加工学会
- Place of Presentation
  山口
- Data Source
  KAKENHI-PROJECT-19560101
[Presentation] "発泡プラスチックの内部構造と諸特性に及ぼす圧延効果"2007
- Author(s)
  中野晋,西盛正敏,瀬川明夫,新保實
- Organizer
  成形加工シンポジア
- Place of Presentation
  福井
- Data Source
  KAKENHI-PROJECT-19560101

1. MIYANO Yasushi (80113033)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
2. NAKAYASU Hidetoshi (80142553)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. YAMABE Masashi (70288265)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SHIMBO Minoru 新保 實

新保 實

Research Projects

Research Products

Co-Researchers

On factors improved strength of foamed plasticsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Time and Temperature Dependence of Cell Number and Cell Size of Foamed PlasticsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Processing Technology of Sub-micron Cellular StructurePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Stochastic Materials Design of Fiber Reinforced Composite Laminates

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

カーボン/アラミドハイブリッドFRP積層板の疲労挙動の解明

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] "発泡成形"2008

Author(s)

Publisher

Data Source

[Book] 発泡成形2008

Author(s)

Total Pages

Publisher

Data Source

[Journal Article] "発泡プラスチックの強度特性に及ぼすスキン層の効果"2009

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 発泡プラスチックの内部構造と強度特性に及ぼす微小繊維の効果2008

Author(s)

Journal Title

NAID

Data Source

[Journal Article] "物理的発泡剤を用いたシリコーンゴムの発泡成形プロセスに関する研究"2008

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 発泡体の気泡密度に及ぼす減圧過程における減圧時間と含浸温度の影響2007

Author(s)

Journal Title

NAID

Data Source

[Journal Article] "発泡体の気泡密度に及ぼす減圧過程における減圧時間と含浸温度の影響"2007

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Effect of Saturation Pressure on Equivalency of Decompression Time and Foaming Temperature on Cell Density of Foamed Polystyrene2007

Author(s)

Journal Title

Data Source

[Journal Article] Misawa,"Effect of Saturation Pressure on Equivalency of Decompression Time and Foaming Temperature on Cell Density of Foamed Polystyrene"2007

Author(s)

Journal Title

Data Source

[Journal Article] 気泡密度に関する減圧時間と発泡温度の相関関係2005

Author(s)

Journal Title

SHIMBO Minoru 新保實

新保實