• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Kakehi Koji  筧 幸次

ORCIDConnect your ORCID iD *help
… Alternative Names

KAKEHI Koji  筧 幸次

KAKEI Koji  筧 幸次

筧 幸次  カケヒ コウジ

Less
Researcher Number 70185726
Other IDs
External Links
Affiliation (Current) 2025: 東京都立大学, システムデザイン研究科, 教授
Affiliation (based on the past Project Information) *help 2020 – 2024: 東京都立大学, システムデザイン研究科, 教授
2018 – 2019: 首都大学東京, システムデザイン研究科, 教授
2017: 首都大学東京, 理工学研究科, 教授
2016: 首都大学東京, 理工学研究科, 准教授
2011 – 2013: 首都大学東京, 理工学研究科, 准教授 … More
2008: Tokyo Metropolitan University, 理工学研究科, 准教授
2007 – 2008: Tokyo Metropolitan University, 大学院・理工学研究科, 准教授
2005: Tokyo Metropolitan University, Dept. of Mechanical Engineering, Associate Professor, 都市教養学部, 助教授
2004: 東京都立科学技術大学, 工学部, 助教授
2002: 東京都立科学技術大学, 大学院・工学研究科, 助教授
2002: Dept. of Mechanical Engineering, Associate Professor, 工学部, 助教授
2001: Tokyo Metropolitan University, Graduate School of Engineering, Research Associate, 工学研究科, 助手
2000: 東京都立大学, 大学院・工学研究科, 助手
1999 – 2000: 東京都立大学, 工学部, 助教授
1998 – 1999: 東京都立大学, 工学研究科, 助手
1998: 東京都立大学, 工学部, 助手
1996: 東京都立大学, 工学部, 助手
1987 – 1989: 東京都立大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Structural/Functional materials / Structural/Functional materials / Basic Section 18010:Mechanics of materials and materials-related / Material processing/Microstructural control engineering
Except Principal Investigator
Structural/Functional materials / Basic Section 26040:Structural materials and functional materials-related / 機械材料工学 / Materials/Mechanics of materials
Keywords
Principal Investigator
Ni基超合金 / 単結晶 / クリープ / ニッケル基超合金 / 凝固割れ / 選択的レーザー溶融法 / Gas Turbine Blade / Single Crystals / Superalloy / 圧縮強度 … More / 異方性 / 耐熱材料 / 高温材料 / 再結晶 / 酸素の混入 / 耐熱合金 / イットリウム添加 / 指向性エネルギー堆積 / 有限要素法 / 予熱 / 酸素混入 / イットリウム / Ni基超耐熱合金 / 選択的レーザ溶融法 / 付加造形 / 機械材料・材料力学 / 構造・機能材料 / 材料加工・処理 / 柱状晶 / ひずみ時効割れ / δ相 / 凝固偏析 / デンドライト組織 / 高温強度 / 電子ビーム溶融法 / 積層造形 / Anisotropy / Mechanical twinning / Internal Cooled webs / Creep / シュラウド / 空冷孔 / 曲げ強度 / 動翼 / 変形双晶 / 空冷流路 / ガスタービン / Rhenium / Optimization / Secondary-Crystal Orientation / レニウム / 最適化 / 2次結晶方位 / ガスタービン翼 / 航空機エンジン / PPB / HIP / 超耐熱合金 / 焼結合金 / インコネル718 / 熱間静水圧法 / インコネル718 / プラズマ回転電極法 / 旧粉末粒子界面 / 粉末冶金 / 耐酸化コーティング / タービン翼 / 共晶γ'粒子 / 熱処理の最適化 / 共晶粒子 / ガスタービン動翼 / 残留応力 / 偶発的破壊 … More
Except Principal Investigator
High-Temperature Corrosion / 高温腐食 / 単結晶 / 軽量構造 / 衝撃吸収 / 機械的特性 / 高周波誘導加熱 / マグネシウム / 発泡剤 / ポーラス金属 / 中空金属球 / 発泡 / 拡散接合 / 難燃性マグネシウム合金 / Orientation dependence of strength. / fatigue strength / creep strength / yield strength / single crystal / Ni-base super alloy / 強化元素 / 結晶方位 / 高温疲労強度 / クリープ強度 / 強度の結晶方位依存性 / 疲労 / クリ-プ / 降伏強度 / Ni基超耐熱合金 / Environmental Loading Mitigation / Super Environment Resistant Steel / Dioxins / Chloride-Induced Corrosion / Superheater Tube / Boiler / High-Efficiency Waste Power Generation / 加熱器管 / 過熱器官 / 環境負荷低減 / 超耐環境性鋼 / ダイオキシン類 / 塩化腐食 / 過熱器管 / ボイラ / 高効率廃棄物発電 / Strength in High-Temperature Corrosive Environment / Creep-Fatigue Interaction / High-Temperature Fatigue / Creep / Superalloy / Thermal Barrier Coating / Heat Resistant Coating / クリープ―疲労相互作用 / 高温腐食環境強度 / クリープ-疲労相互作用 / 高温疲労 / クリープ / 超合金 / サーマルバリアコーティング / 遮熱コーティング / Pollycrystalline Alloys / DS Superalloy / Single Crystal Ni-base Superalloy / Medelling / Life Prediction / Thermo-Mechanical Fatigue / Coatings / Industrial Gas Turbines / 疲労強度 / Ni基超合金 / 多結晶材 / 一方向凝固材 / 単結晶Ni基超合金 / モデル化 / 寿命推定法 / コーティング材 / 熱疲労 / 産業用ガスタービン Less
  • Research Projects

    (13 results)
  • Research Products

    (190 results)
  • Co-Researchers

    (16 People)
  •  Dealing with Cracking and Oxygen Contamination in Selective Laser Melting of High-Strength Ni-based SuperalloysPrincipal Investigator

    • Principal Investigator
      筧 幸次
    • Project Period (FY)
      2022 – 2024
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18010:Mechanics of materials and materials-related
    • Research Institution
      Tokyo Metropolitan University
  •  Fabrication of lightweight metallic hollow sphere based on flame-retardant magnesium alloy plates

    • Principal Investigator
      Kitazono Koichi
    • Project Period (FY)
      2019 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 26040:Structural materials and functional materials-related
    • Research Institution
      Tokyo Metropolitan University
  •  Additive manufacturing of the high-strength nickel base superalloys using the metal 3D printerPrincipal Investigator

    • Principal Investigator
      Kakehi Koji
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Tokyo Metropolitan University
  •  Influence of Previous Particle Boundary on high-temperature strengths of PM superalloyPrincipal Investigator

    • Principal Investigator
      KAKEHI Koji
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
  •  Combined effect of crystallographic anisotropy and oxidation layer on failure of single-crystal Ni base superalloy turbine bladePrincipal Investigator

    • Principal Investigator
      KAKEHI Koji
    • Project Period (FY)
      2006 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
  •  Failure at cooled internal webs in Ni-based superalloy single crystals bladesPrincipal Investigator

    • Principal Investigator
      KAKEHI Koji
    • Project Period (FY)
      2004 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
      Tokyo Metropolitan Institute of Technology
  •  Development of Super Environment-Resistant Steels for High-Temperature and High-Efficiency Waste-to Power Plant Schemed for the Minimized Environmental Risks

    • Principal Investigator
      YOSHIDA Masayuki
    • Project Period (FY)
      2001 – 2003
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
  •  Optimization of Secondary Crystallographic Orientation of Ni-based superalloy single crystalsPrincipal Investigator

    • Principal Investigator
      KAKEHI Koji
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan Institute of Technology
      Tokyo Metropolitan University
  •  Optimalization of Thermal Barrier Coating Systems on the Basis of Complicated Failure Analysis under Thermal - Mechanical - Chemical Loadings

    • Principal Investigator
      YOSHIBA Masayuki
    • Project Period (FY)
      1999 – 2001
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
  •  共晶γ'粒子微細分散により再結晶粒生成を抑制したNi基超合金単結晶の開発Principal Investigator

    • Principal Investigator
      筧 幸次
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
  •  Systematic Research on Hig-Strength and High Performance Ni-Base Superalloy Coatings for Advanced Gas Turbines.

    • Principal Investigator
      OKAZAKI Masakazu
    • Project Period (FY)
      1998 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (B).
    • Research Field
      Materials/Mechanics of materials
    • Research Institution
      The University of Tokyo
      Nagaoka University of Technology
  •  Ni基超合金単結晶ガスタービン動翼の偶発的破壊と残留応力Principal Investigator

    • Principal Investigator
      筧 幸次
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Tokyo Metropolitan University
  •  Crystallographic Orientation and Chemical Composition Dependence of Creep and High Temperature Fatigue Strength of Single Crystals of Ni-Base Superalloys.

    • Principal Investigator
      SAKAKI Tsuneaki
    • Project Period (FY)
      1987 – 1989
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械材料工学
    • Research Institution
      Tokyo Metropolitan University

All 2024 2023 2022 2019 2018 2017 2016 2014 2013 2012 2011 2009 2008 2007 2006 2005 2004

All Journal Article Presentation Book Patent

  • [Book] 耐熱合金の熱物性測定検討報告書2008

    • Author(s)
      日比谷孟俊, 福山博之, 渡辺匡人, 塚田隆夫, 筧幸次, 小澤俊平, 桑原啓一
    • Total Pages
      63
    • Publisher
      (財)資源探査用観測システム・宇宙環境利用研究開発機構
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] Effects of base plate temperature on microstructure evolution and high-temperature mechanical properties of IN718 processed by laser powder bed fusion using simulation and experiment2024

    • Author(s)
      Kakehi Koji、Chowdhury Hasina Tabassum、Shinoda Yusuke、Naidu Palleda Thaviti、Kakuta Naoto、Ishisako Shohei
    • Journal Title

      The International Journal of Advanced Manufacturing Technology

      Volume: 130 Issue: 11-12 Pages: 5777-5793

    • DOI

      10.1007/s00170-024-13028-6

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] The Effects of Al Addition on the Oxidation Behavior of Ni-Fe-Cr-Nb Alloys at 800?°C in Air2024

    • Author(s)
      Kuo Yen-Ling、Kakehi Koji、Nanko Makoto、Hayashi Shigenari
    • Journal Title

      High Temperature Corrosion of Materials

      Volume: - Issue: 4 Pages: 667-683

    • DOI

      10.1007/s11085-024-10238-x

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy2024

    • Author(s)
      Palleda Thaviti Naidu、Chowdhury Hasina Tabassum、Banoth Santhosh、Murakami Hideyuki、Kakehi Koji
    • Journal Title

      Journal of Alloys and Compounds

      Volume: 978 Pages: 173404-173404

    • DOI

      10.1016/j.jallcom.2023.173404

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] Effects of Preheating on Thermal Behavior in Inconel 718 Processed by Additive Manufacturing2024

    • Author(s)
      Chowdhury Hasina Tabassum、Palleda Thaviti Naidu、Kakuta Naoto、Kakehi Koji
    • Journal Title

      Thermo

      Volume: 4 Issue: 1 Pages: 48-64

    • DOI

      10.3390/thermo4010005

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 7182023

    • Author(s)
      Naidu Palleda Thaviti、Banoth Santhosh、Tanaka Mikiko、Murakami Hideyuki、Kakehi Koji
    • Journal Title

      Materials & Design

      Volume: 225 Pages: 111567-111567

    • DOI

      10.1016/j.matdes.2022.111567

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion2023

    • Author(s)
      Banoth Santhosh、Palleda Thaviti Naidu、Saito Takuma、Murakami Hideyuki、Kakehi Koji
    • Journal Title

      The International Journal of Advanced Manufacturing Technology

      Volume: 126 Issue: 3-4 Pages: 1593-1609

    • DOI

      10.1007/s00170-023-11237-z

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy2023

    • Author(s)
      Lee Jhuo-Lun、Wang Pei-Te、Lo Kai-Chi、Shen Pai-Keng、Tsou Nien-Ti、Kakehi Koji、Murakami Hideyuki、Tsai Che-Wei、Gorsse St?phane、Yeh An-Chou
    • Journal Title

      Science and Technology of Advanced Materials

      Volume: 24 Issue: 1 Pages: 2158043-2158043

    • DOI

      10.1080/14686996.2022.2158043

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] TiAlの選択的レーザー溶融2022

    • Author(s)
      筧幸次,水田和裕,藤井達也,後閑一洋
    • Journal Title

      日本ガスタービン学会誌

      Volume: 50

    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] 選択的レーザー溶融法で造形したNi基超合金のクリープ特性劣化2022

    • Author(s)
      筧 幸次,郭 妍伶
    • Journal Title

      ふぇらむ = Bulletin of the Iron and Steel Institute of Japa

      Volume: 27 Pages: 870-881

    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] Effect of build direction on creep properties of TiAl4822 alloy additively manufactured by electron beam melting2022

    • Author(s)
      GOKAN Kazuhiro、MIZUTA Kazuhiro、KAKEHI Koji
    • Journal Title

      Transactions of the JSME (in Japanese)

      Volume: 88 Issue: 915 Pages: 22-00114-22-00114

    • DOI

      10.1299/transjsme.22-00114

    • ISSN
      2187-9761
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] Effect of process parameters on microstructure and high-temperature strengths of titanium aluminide alloy fabricated by electron beam melting2022

    • Author(s)
      Gokan Kazuhiro、Yamagishi Yudai、Mizuta Kazuhiro、Kakehi Koji
    • Journal Title

      Journal of Japan Institute of Light Metals

      Volume: 72 Issue: 6 Pages: 308-313

    • DOI

      10.2464/jilm.72.308

    • ISSN
      0451-5994, 1880-8018
    • Year and Date
      2022-06-15
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Journal Article] 不純物元素に対しロバストな積層造形ニッケル基超合金の創成2018

    • Author(s)
      筧 幸次,林 重成,郭 妍伶,佐藤 直子,尾ノ井 正裕
    • Journal Title

      日本学術振興会耐熱金属材料第123委員会研究報告

      Volume: 59 Pages: 359-372

    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting2018

    • Author(s)
      Kuo Yen-Ling、Nagahari Toshiki、Kakehi Koji
    • Journal Title

      Materials

      Volume: 11 Issue: 6 Pages: 996-996

    • DOI

      10.3390/ma11060996

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] 金属粉末積層造形法により作製した耐熱合金における高温強度特性劣化2018

    • Author(s)
      筧 幸次,郭妍伶,秋野一輝
    • Journal Title

      日本ガスタービン学会誌

      Volume: 46 Pages: 197-203

    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Strengths and Microstructure of SUS316L Fabricated by Selective Laser Melting2018

    • Author(s)
      Akino Kazuki、Kakehi Koji
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 59 Issue: 3 Pages: 482-487

    • DOI

      10.2320/matertrans.M2017163

    • NAID

      130006400681

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] SLM積層造形法を用いて作製した固溶強化型Ni基超合金IN625のクリープ特性と組織2018

    • Author(s)
      磯部諒也,筧幸次
    • Journal Title

      日本学術振興会耐熱金属材料第123委員会研究報告

      Volume: 59 Pages: 455-470

    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Characterization of Ni-Based Superalloy Built by Selective Laser Melting and Electron Beam Melting2018

    • Author(s)
      Kuo Yen-Ling、Kamigaichi Azusa、Kakehi Koji
    • Journal Title

      Metallurgical and Materials Transactions A

      Volume: 49 Issue: 9 Pages: 3831-3837

    • DOI

      10.1007/s11661-018-4769-y

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Study of Formed Oxides in IN718 Alloy during the Fabrication by Selective Laser Melting and Electron Beam Melting2018

    • Author(s)
      Yu Hao、Hayashi Shigenari、Kakehi Koji、Kuo Yen-Ling
    • Journal Title

      Metals

      Volume: 9 Issue: 1 Pages: 19-19

    • DOI

      10.3390/met9010019

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] The High Temperature Tensile and Creep Behaviors of High Entropy Superalloy2017

    • Author(s)
      Tsao Te-Kang、Yeh An-Chou、Kuo Chen-Ming、Kakehi Koji、Murakami Hideyuki、Yeh Jien-Wei、Jian Sheng-Rui
    • Journal Title

      Scientific Reports

      Volume: 7 Issue: 1 Pages: 1-9

    • DOI

      10.1038/s41598-017-13026-7

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing2017

    • Author(s)
      Kuo Yen-Ling、Horikawa Shota、Kakehi Koji
    • Journal Title

      Scripta Materialia

      Volume: 129 Pages: 74-78

    • DOI

      10.1016/j.scriptamat.2016.10.035

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing2017

    • Author(s)
      Kuo Yen-Ling、Horikawa Shota、Kakehi Koji
    • Journal Title

      Materials & Design

      Volume: 116 Pages: 411-418

    • DOI

      10.1016/j.matdes.2016.12.026

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Influence of Powder Surface Contamination in the Ni-Based Superalloy Alloy718 Fabricated by Selective Laser Melting and Hot Isostatic Pressing2017

    • Author(s)
      Kuo Yen-Ling、Kakehi Koji
    • Journal Title

      Metals

      Volume: 7 Issue: 9 Pages: 367-367

    • DOI

      10.3390/met7090367

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Microstructure and Mechanical Properties of Ti–6Al–4V parts build by Selective Laser Melting2017

    • Author(s)
      櫻井 勇也、筧 幸次
    • Journal Title

      Journal of the Japan Institute of Metals and Materials

      Volume: 81 Issue: 3 Pages: 120-126

    • DOI

      10.2320/jinstmet.J2016042

    • NAID

      130005397039

    • ISSN
      0021-4876, 1880-6880, 2433-7501
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Strengths and Microstructure of SUS316L Fabricated by Selective Laser Melting2016

    • Author(s)
      秋野 一輝, 筧 幸次
    • Journal Title

      Journal of the Japan Institute of Metals and Materials

      Volume: 80 Issue: 12 Pages: 772-777

    • DOI

      10.2320/jinstmet.JAW201610

    • NAID

      130005284307

    • ISSN
      0021-4876, 1880-6880, 2433-7501
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] 金属3Dプリンタのスーパーアロイへの適用の可能性をさぐる2016

    • Author(s)
      筧幸次
    • Journal Title

      機械技術

      Volume: 64 Pages: 76-82

    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Microstructure and Strength of HIP Sintered Ni Base Superalloy Using PREP Powder2016

    • Author(s)
      筧幸次,横森玲,西牧智大
    • Journal Title

      Journal of the Japan Institute of Metals and Materials

      Volume: 80 Issue: 8 Pages: 508-514

    • DOI

      10.2320/jinstmet.J2016014

    • NAID

      130005165560

    • ISSN
      0021-4876, 1880-6880, 2433-7501
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Effect of secondary orientation on the creep strength of single crystal of a nickel-based superalloy2016

    • Author(s)
      筧幸次
    • Journal Title

      Transactions of the JSME (in Japanese)

      Volume: 82 Issue: 838 Pages: 15-00673-15-00673

    • DOI

      10.1299/transjsme.15-00673

    • NAID

      130005159205

    • ISSN
      2187-9761
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] High Temperature Properties of Advanced Directionally-Solidified High Entropy Superalloys2016

    • Author(s)
      Te-Kang Tsao, An-Chou Yeh, Jien-Wei Yeh, Mau-Sheng Chiou, Chen-Ming Kuo, Hideyuki Murakami, Koji Kakehi
    • Journal Title

      Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys

      Volume: 13 Pages: 1001-1009

    • DOI

      10.1002/9781119075646.ch106

    • Peer Reviewed / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Journal Article] Influence of thermal exposure on the creep properties of an aluminized Ni-based single crystal superalloy in different surface orientations2014

    • Author(s)
      F. H. Latief, K. Kakehi
    • Journal Title

      Materials and Design

      Volume: 56 Pages: 816-821

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Influences of ruthenium and crystallographic orientation on creep behavior of aluminized Ni-base single crystal superalloys2014

    • Author(s)
      F. H. Latief, K. Kakehi, A. C. Yeh, H. Murakami
    • Journal Title

      Materials Science and Engineering A

      Volume: 592 Pages: 143-152

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Influence of primary and secondary orientations on creep rupture behavior of aluminized single crystal Ni-based superalloy2014

    • Author(s)
      K. Kakehi, F. H. Latief and T. Sato
    • Journal Title

      Materials Science and Engineering A

      Volume: 604 Pages: 148-155

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] δ-Subsolvus でHIP 焼結したP/M 718 の特性2013

    • Author(s)
      鈴木千明,筧幸次,近藤大介
    • Journal Title

      日本金属学会誌

      Volume: 77 Pages: 147-152

    • NAID

      10031162850

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Influence of heat treatment on anisotropic creep behavior of aluminide coating on a Ni-base single crystal superalloy"2013

    • Author(s)
      F. H. Latief, K. Kakehi
    • Journal Title

      Materials & Design

      Volume: 52 Pages: 134-142

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Oxidation behavior characteristics of an aluminized Ni-based single crystal superalloy CM186LC between 900 °C and 1100 °C in air2013

    • Author(s)
      F. H. Latief, K. Kakehi, Y. Tashiro
    • Journal Title

      Journal of Industrial and Engineering Chemistry

      Volume: 19 Pages: 1926-1932

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] ニッケル基単結晶超合金の強度におよぼす塑性異方性の影響2013

    • Author(s)
      筧幸次
    • Journal Title

      天田財団 FORM TECH REVIEW

      Volume: 23 Pages: 51-56

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] δ-subsolvus温度でHIP焼結したP/M 718の特性2013

    • Author(s)
      鈴木千明,筧 幸次,近藤 大介
    • Journal Title

      日本金属学会誌

      Volume: 第 77巻 Pages: 147-152

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] δ-SubsolvusでHIP焼結したP/M 718の特性2013

    • Author(s)
      鈴木千明,筧幸次,近藤大介
    • Journal Title

      日本金属学会誌

      Volume: Vol. 77, No. 4 Pages: 147-152

    • NAID

      10031162850

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Anisotropic creep behavior of aluminized Ni-based single crystal superalloy TMS-752013

    • Author(s)
      F. H. Latief, K. Kakehi, H. Murakami
    • Journal Title

      Materials Science and Engineering A

      Volume: 567 Pages: 65-71

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Anisotropic creep properties of aluminized Ni-based single-crystal superalloy at intermediate and high temperatures2013

    • Author(s)
      F. H. Latief, K. Kakehi, H. Murakami
    • Journal Title

      Scripta Materialia

      Volume: 68 Pages: 126-129

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Influence of heat treatment on anisotropic creep behavior of aluminide coating on a Ni-base single crystal superalloy2013

    • Author(s)
      F. H. Latief, K. Kakehi
    • Journal Title

      Materials & Design

      Volume: 52 Pages: 134-142

    • DOI

      10.1016/j.matdes.2013.04.101

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] 溶解鍛造Ni基超合金Inconel 718の強度特性に及ぼす低融点元素の影響2013

    • Author(s)
      飯島有理,橋向智弘,筧幸次
    • Journal Title

      日本学術振興会第123委員会研究報告

      Volume: 54 Pages: 131-136

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Effects of Re content and crystallographic orientation on creep behavior of aluminized Ni-base single crystal superalloys2013

    • Author(s)
      F. H. Latief, K. Kakehi
    • Journal Title

      Materials & Design

      Volume: 49 Pages: 485-492

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] δ-subsolvus温度でHIP焼結したP/M 718の特性2013

    • Author(s)
      鈴木千明,筧幸次,近藤大介
    • Journal Title

      日本金属学会誌

      Volume: 第77巻 Pages: 147-152

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] ニッケル基単結晶超合金の強度におよぼす塑性異方性の影響2013

    • Author(s)
      筧幸次
    • Journal Title

      天田財団FORM TECH REVIEW

      Volume: 23 Pages: 51-56

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Isothermal oxidation behavior characteristics of a second generation Ni-base single crystal superalloy in air at 1000 and 1100°C2012

    • Author(s)
      F. H. Latief, K. Kakehi, X. Fu, Y. Tashiro
    • Journal Title

      International Journal of Electrochemical Science

      Volume: 7 Pages: 8369-8383

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Effect of surface orientation on high temperature oxidation of Ni-base single crystal superalloy2012

    • Author(s)
      F. H. Latief, K. Kakehi, Y.Tashiro and X. Fu
    • Journal Title

      日本学術振興会第123委員会研究報告

      Volume: 53 Pages: 301-308

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Inconel 718の微視組織と機械的特性に及ぼすTIG溶接の影響2012

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Journal Title

      日本金属学会誌

      Volume: 第76巻 Pages: 289-294

    • NAID

      10030630759

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Inconel 718の微視組織と機械的特性に及ぼすTIG溶接の影響2012

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Journal Title

      日本金属学会誌

      Volume: 76 Pages: 289-294

    • NAID

      10030630759

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] INFLUENCE OF CRYSTALLOGRAPHIC ORIENTATION ON CREEP BEHAVIOR OF ALUMINIZED NI-BASE SINGLE CRYSTAL SUPERALLOYS2012

    • Author(s)
      F. H. Latief, Koji Kakehi, Hideyuki MURAKAMI and Kazuki KASAI
    • Journal Title

      Proceedings of Superalloys 2012

      Volume: 12 Pages: 311-320

    • DOI

      10.1002/9781118516430.ch34

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-12J10616, KAKENHI-PROJECT-23560844
  • [Journal Article] Effect of surface orientation on high temperature oxidation of Ni-base single crystal superalloy2012

    • Author(s)
      F. H. Latief, K. Kakehi, Y.Tashiro and X. Fu
    • Journal Title

      Meeting of the 123rd Committee on Heat-resisting Metals and Alloys, Japan Society for the Promotion of Science

      Volume: 53 Pages: 301-308

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Influence of crystallographic orientation on creep behavior of aluminized Ni-base single crystal superalloys2012

    • Author(s)
      F. H. Latief, K. Kakehi, K.Kasai, H. Murakami
    • Journal Title

      The 12th International Symposium on Superalloys, in : E. Huron, R.C. Reed, J. Mills, et al, editors. Superalloys 2012, TMS, Warrendale

      Pages: 311-320

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Isothermal oxidation behavior characteristics of a second generation Ni-base single crystal superalloy in air at 1000 and 1100° C2012

    • Author(s)
      F. H. Latief, K. Kakehi, X. Fu, Y. Tashiro
    • Journal Title

      International Journal of Electrochemical Science

      Volume: 7 Pages: 8369-8383

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] アルミ拡散コーティングを施したCMSX4薄板試験片のクリープ強度に及ぼす塑性異方性2012

    • Author(s)
      佐藤耕,F.H.Latief,筧幸次
    • Journal Title

      日本学術振興会第123委員会研究報告

      Volume: 53 Pages: 255-263

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] Effect of surface orientation on high temperature oxidation behavior of Ni-base single crystal superalloy CM186LC at 1100°C in air2012

    • Author(s)
      F. H. Latief, K. Kakehi, Y. Tashiro, X. Fu
    • Journal Title

      International Journal of Electrochemical Science

      Volume: 7 Pages: 7608-7618

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] δ-subsolvus温度でHIP焼結したP/M 718の特性2012

    • Author(s)
      鈴木千明,筧幸次,近藤大介
    • Journal Title

      日本学術振興会第123委員会研究報告

      Volume: 53 Pages: 265-270

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] 溶解鍛造用Ni基超合金Inconel 718の溶接特性2011

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Journal Title

      日本学術振興会第123委員会研究報告

      Volume: 52 Pages: 391-396

    • Data Source
      KAKENHI-PROJECT-23560844
  • [Journal Article] The effect of Ruthenium on creep strength of Ni-base single crystal superalloys at 750℃ and 750 MPa, N. Tsuno, K. Kakehi, C. M. F. Rae and R. Hashizume2009

    • Author(s)
      N. Tsuno, K. Kakehi, C. M. F. Rae, R. Hashizume
    • Journal Title

      Metallurgical and Materials Transactions 40A

      Pages: 269-272

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 簡便なデータベース作成法を用いた構造用鋼の熱処理シミュレーション2009

    • Author(s)
      渡邉哲史, 筧幸次, 竹野裕之, 吉田功, 深尾勇人, 原口裕
    • Journal Title

      鉄と鋼 Vol. 95

      Pages: 22-28

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 簡便なデータベース作成法を用いた構造用鋼の熱処理シミュレーション2009

    • Author(s)
      渡邉哲史, 筧幸次, 竹野裕之, 吉田功, 深尾勇人, 原口裕, 鉄と鋼
    • Journal Title

      Vol.95

      Pages: 22-28

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] The effect of Ruthenium on creep strength of Ni-base single crystal superalloys at 750 ℃ and 750 Mpa2009

    • Author(s)
      N. Tsuno, K. Kakehi, C. M. F. Rae and R. Hashizume
    • Journal Title

      Metallurgical and Materials Transactions A 40A, FEBRUARY

      Pages: 269-272

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 耐摩耗鋼板の機械的特性とミクロ組織に及ぼす軟化熱処理の影響2008

    • Author(s)
      原田智也、筧幸次、竹野裕之、吉田功
    • Journal Title

      鉄と鋼 Vol.94

      Pages: 130-133

    • NAID

      110006642510

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] Tension/compression Asymmetry of Creep Strength of Ni-Based Single Crystal Superalloys2008

    • Author(s)
      N. Tsuno, S. Shimabayashi, K. Kakehi, C. M. F. Rae, R. C. Reed
    • Journal Title

      Superalloys 2008

      Pages: 433-441

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 耐熱チタン合金DAT54の強度特性に及ぼす高温酸化の影響2008

    • Author(s)
      筧幸次, 橋本隆史
    • Journal Title

      日本金属学会誌 72

      Pages: 819-824

    • NAID

      10024326744

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 耐熱チタン合金DAT54の強度特性に及ぼす高温酸化の影響2008

    • Author(s)
      筧幸次, 橋本隆史
    • Journal Title

      日本金属学会誌 第72巻, 第10号

      Pages: 819-824

    • NAID

      10024326744

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 耐酸化コーティングを施した単結晶Ni基超合金のクリープ特性に及ぼす結晶二次方位の影響2008

    • Author(s)
      上原慎矢, 筧幸次, 村上秀之
    • Journal Title

      日本学術振興会第123委員会研究報告 49

      Pages: 45-50

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 耐摩耗鋼板の機械的特性とミクロ組織に及ぼす軟化熱処理の影響2008

    • Author(s)
      原田智也, 筧幸次, 竹野裕之, 吉田功
    • Journal Title

      鉄と鋼 Vol.94

      Pages: 130-130

    • NAID

      110006642510

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] Tension/compression Asymmetry of Creep Strength of Ni-Based Single Crystal Superalloys2008

    • Author(s)
      N. Tsuno, S. Shimabayashi, K. Kakehi, C.M.F. Rae and R.C
    • Journal Title

      Reed, Superalloys 2008

      Pages: 433-441

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 耐熱合金の熱物性測定検討報告書2008

    • Author(s)
      日比谷孟俊, 福山博之, 渡辺匡人, 塚田隆夫, 筧幸次, 小澤俊平, 桑原啓一
    • Journal Title

      (財)資源探査用観測システム・宇宙環境利用研究開発機構発行

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 単結晶Ni基超合金のクリープ強度に及ぼすRuの影響2008

    • Author(s)
      津野展康, 島林俊介, 筧幸次, Catherine Rae, 橋詰良吉
    • Journal Title

      日本学術振興会第123委員会研究報告 49

      Pages: 51-55

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] Tension/compression Asymmetry of Creep Strength of Ni-Based Single Crystal Superalloys2007

    • Author(s)
      N. Tsuno and K. Kakehi
    • Journal Title

      Proceedings of International Gas Turbine Congress 2007

      Pages: 45-50

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] Tension/compression Asymmetry of Creep Strength of Ni-Based Single Crystal Superalloys2007

    • Author(s)
      N.Tsunoand K.Kakehi
    • Journal Title

      International Gas Turbine Congress 2007 Tokyo

    • Data Source
      KAKENHI-PROJECT-19560706
  • [Journal Article] 単結晶Ni基超合金のクリープ強度における引張/圧縮異方性2006

    • Author(s)
      津野展康, 山下真輝, 筧 幸次
    • Journal Title

      日本金属学会講演概要 138回

      Pages: 476-476

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Tension/Compression Asymmetry in Yield and Creep Strengths of Ni-Based Superalloy with High Amount of Tantalum2006

    • Author(s)
      Masaki Yamashita^*, Koji Kakehi
    • Journal Title

      Scripta Materialia Vol.55

      Pages: 139-142

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Tension / Compression Asymmetry in Yield and Creep Strengths of Ni-Based Superalloy with High Amount of Tantalum2006

    • Author(s)
      Masaki Yamashita, Koji Kakehi
    • Journal Title

      Scripta Materialia 55

      Pages: 139-142

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Tension/Compression Asymmetry in Yield and Creep Strengths of Ni-Based Superalloy with High Amount of Tantalum2006

    • Author(s)
      Nasaki Yamashita^*, Koji Kakehi
    • Journal Title

      Scripta Materialia (in press)

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] 耐熱チタン合金の高温強度特性に関する研究2006

    • Author(s)
      橋本隆史, 磯田康二, 筧 幸次
    • Journal Title

      日本鉄鋼協会講演論文集,材料とプロセス Vol.19,No.3

      Pages: 610-610

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Effect of Heat treatment on Tension/Compression Strengths in U720li2005

    • Author(s)
      Yusuke Tuboi, Koji Kakehi
    • Journal Title

      J.Japan Inst.Metals Vol.69,No.2

      Pages: 202-205

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] 単結晶Ni基超合金の低温高応力クリープ挙動に及ぼす塑性異方性の影響2005

    • Author(s)
      小薮豪通, 筧幸次
    • Journal Title

      日本金属学会講演概要 137回

      Pages: 175-175

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] CMSX4のクリープ強度におよぼす時効熱処理の影響2005

    • Author(s)
      筧幸次, 高橋智
    • Journal Title

      材料 Vol.54 No.2

      Pages: 136-142

    • NAID

      110006266461

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Measuring Young's modulus of Ni-based superalloy single crystals at elevated temperatures through microindentation2005

    • Author(s)
      H.Takagi, M.Fujiwara, K.Kakehi
    • Journal Title

      J.of the Society of Material Science, Japan Vol.54,No.2

      Pages: 136-142

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] 単結晶Ni基超合金の結晶塑性異方性と機械的特性2005

    • Author(s)
      筧幸次
    • Journal Title

      金属,アグネ Vol.75 No.7

      Pages: 21-28

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] U720Liの引張/圧縮強度におよぼす熱処理条件の影響2005

    • Author(s)
      坪井悠介, 筧幸次
    • Journal Title

      日本金属学会誌 Vol.69, No.2

      Pages: 202-205

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Ni 基鍛造合金 U720Li の機械的特性におよぼすミクロ組織の影響2005

    • Author(s)
      大里翼, 坪井悠介, 筧幸次
    • Journal Title

      日本学術振興会耐熱金属材料123委員会研究報告 Vol.46,No.2

      Pages: 139-139

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Ni基鍛造合金U720Liの機械的特性におよぼすミクロ組織の影響2005

    • Author(s)
      大里翼, 坪井悠介, 筧幸次
    • Journal Title

      日本学術振興会耐熱金属材料123委員会研究報告 Vol.46,No.2

      Pages: 139-139

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] A Study on Bending Deformation Behavior of Ni-Based DS and SC Superalloys2004

    • Author(s)
      H.Tamaki, K.Fujita, A.Okayama, N.Matsuda, A.Yoshinari, K.Kakehi
    • Journal Title

      SUPERALLOYS2004, 米国 The Minerals, Metals & Materials Society

      Pages: 145-154

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Influence of Heat treatment on Creep Strength of CMSX42004

    • Author(s)
      Koji Kakehi, Satoshi Takahashi
    • Journal Title

      J.Japan Inst.Metals Vol.68,No.8

      Pages: 611-614

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] The Transition from Primary to Secondary Creep2004

    • Author(s)
      G.L.Drew, R.C.Reed, K.Kakehi, C.M.F.Rae
    • Journal Title

      SUPERALLOYS2004, 米国 The Minerals, Metals & Materials Society

      Pages: 127-136

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] A Study on Bending Deformation Behavior of Ni-Based DS and SC Superalloys2004

    • Author(s)
      H.Tamaki, K.Fujita, A.Okayama, N.Matsuda, A.Yoshinari, K.Kakehi
    • Journal Title

      SUPERALLOYS2004, 米国The Minerals, Metals & Materials Society

      Pages: 145-154

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Influence of Primary and Secondary Crystallographic Orientations on Strengths of Nickel-Based Superalloy Single Crystals2004

    • Author(s)
      K.Kakehi
    • Journal Title

      Materials Transactions Vol.45 No.6

      Pages: 1824-1828

    • NAID

      10013135850

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Measuring Young's modulus of Ni-based superalloy single crystals at elevated temperatures through microindentation2004

    • Author(s)
      H.Takagi, M.Fujiwara, K.Kakehi
    • Journal Title

      Materials Science and Engineering A, Elsevier Science A387-389

      Pages: 348-351

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Measuring Young's modules of Ni-based superalloy single crystals at elevated temperatures through microindentation2004

    • Author(s)
      H.Takagi, M.Fujiwara, K.Kakehi
    • Journal Title

      Materials Science and Engineering A, Elsevier Science A387-389

      Pages: 348-351

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Strain Softening in Creep Deformation of Single Crystal Ni Based Superalloy2004

    • Author(s)
      Koji Kakehi, Satoshi Takahashi
    • Journal Title

      Materials Science and Engineering A, Elsevier Science A387-389

      Pages: 348-351

    • NAID

      10013466443

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] 単結晶Ni基超合金のクリープにおけるひずみ軟化2004

    • Author(s)
      筧幸次, 高橋智
    • Journal Title

      日本金属学会誌 Vol.68 No.8

      Pages: 661-614

    • NAID

      10013466443

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] 単結晶Ni基超合金のクリープにおけるひずみ軟化2004

    • Author(s)
      筧幸次, 高橋智
    • Journal Title

      日本金属学会誌 62巻

      Pages: 611-614

    • NAID

      10013466443

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] 単結晶Ni基超合金のクリープにおけるひずみ軟化2004

    • Author(s)
      筧幸次, 高橋智
    • Journal Title

      日本金属学会誌, 62巻

      Pages: 611-614

    • NAID

      10013466443

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Influence of Primary and Secondary Crystallographic Orientations on Strength of Nickel-Based Superalloy Single Crystals2004

    • Author(s)
      K.Kakehi
    • Journal Title

      Materials Transactions Vol.45 No.6

      Pages: 1824-1828

    • NAID

      10013135850

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] The Transition from Primary to Secondary Creep2004

    • Author(s)
      GL.Drew, R.C.Reed, K.Kakehi, C.M.F.Rae
    • Journal Title

      SUPERALLOYS 2004, The Minerals, Metals & Materials Society

      Pages: 127-136

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] The Transition from Primary to Secondary Creep2004

    • Author(s)
      G.L.Drew, R.C.Reed, K.Kakehi, C.M.F.Rae
    • Journal Title

      SUPERALLOYS2004, 米国The Minerals, Metals & Materials Society

      Pages: 127-136

    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] A Study on Bending Deformation Behavior of Ni-Based DS and SC Superalloys2004

    • Author(s)
      H.Tamaki, K.Fujita, A.Okayama, N.Matsuda, A.Yoshinari, K.Kakehi
    • Journal Title

      SUPERALLOYS 2004, The Minerals, Metals & Materials Society

      Pages: 145-154

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Journal Article] Influence of Primary and Secondary Crystallographic Orientations on Strengths of Nickel-Based Superalloy Single Crystals2004

    • Author(s)
      K.Kakehi
    • Journal Title

      Materials Tansactions Vol.45,No.6

      Pages: 1824-1828

    • NAID

      10013135850

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16560613
  • [Patent] 耐熱合金材料及び成形体2022

    • Inventor(s)
      K.Kakehi, S.Hayashi, Y.Kuo
    • Industrial Property Rights Holder
      K.Kakehi, S.Hayashi, Y.Kuo
    • Industrial Property Rights Type
      特許
    • Filing Date
      2022
    • Acquisition Date
      2023
    • Overseas
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Patent] ニッケル基合金2013

    • Inventor(s)
      筧幸次
    • Industrial Property Rights Holder
      筧幸次
    • Industrial Property Rights Type
      特許
    • Filing Date
      2013-12-05
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 指向性エネルギー堆積法で造形したIN718 材の組織と機械特性2024

    • Author(s)
      佐藤 七恵,パレーダ ナイドゥ,筧幸次,後閑 一洋
    • Organizer
      日本金属学会2024年春期講演(第174回)
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] JEOL EB-PBF 装置を用いて付加造形した Alloy718 材の組織と高温強度特性2024

    • Author(s)
      森重葵,パレーダ ナイデュ,筧幸次,宮北 歩 増田 員拓 佐藤 崇
    • Organizer
      日本金属学会2024年春期講演(第174回)
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] Near-γ TiAl合金とlamellar TiAl合金の高温強度特性の比較2024

    • Author(s)
      大石道,筧幸次,後閑一洋
    • Organizer
      日本金属学会2024年春期講演(第174回)
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 金属粉末射出成形(MIM)により造形されたIN718 の組織と高温強度特性2024

    • Author(s)
      筧 幸次,鈴木花実,パレーダ ナイドゥ,奥山 彦治
    • Organizer
      日本金属学会2024年春期講演(第174回)
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 選択的レーザー溶融法により造形したAlloy718の疲労寿命に及ぼす予備加熱の影響2023

    • Author(s)
      小川航輝,筧幸次,石佐古翔
    • Organizer
      第186回秋季講演大会,CAMP-ISIJ; Vol.36 (2023) No.2
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 選択的レーザー溶融法により作製したTiAl4822合金の機械的特性に及ぼす造形方向の影響2023

    • Author(s)
      浅尾優文、筧幸次、水田和裕、後閑一洋
    • Organizer
      2023年日本金属学会 秋期(第173回)講演大会
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 電子ビーム溶融法により造形されたTiAl4822の機械的特性に造形方向と造形形状が与える影響2023

    • Author(s)
      柴田皓平、筧幸次、水田和裕、後閑一洋
    • Organizer
      2023年日本金属学会 秋期(第173回)講演大会
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 選択的レーザー溶融法で造形したハイエントロピー合金の組織と機械的特性2023

    • Author(s)
      謝浩然,筧幸次,A. Yeh,P. Chou
    • Organizer
      第186回秋季講演大会,CAMP-ISIJ; Vol.36 (2023) No.2
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 選択的レーザー溶融法により造形したNi基超合金IN718の微視組織および機械的特性に及ぼす予備加熱の影響2022

    • Author(s)
      後藤崚友, 篠田侑賛, 筧幸次,近藤拓未
    • Organizer
      第50回日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] HIP 焼結により作製されたTiAl4822合金の微視組織および機械的特性に及ぼすY 添加の影響2022

    • Author(s)
      岩崎一聖, 筧幸次, 尾ノ井正裕, 米本朋弘
    • Organizer
      第50回日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 選択的レーザー溶融法により造形したNi基超合金IN718のクリープ特性に及ぼすY添加の影響2022

    • Author(s)
      田中美紀子, Thaviti Naidu Palleda, 筧幸次, 村上秀之
    • Organizer
      第50回日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] 選択的レーザー溶融法で造形したTiAl4822の耐クリープ性向上にむけた組織制御2022

    • Author(s)
      土方優太, 水田和裕, 後閑一洋, 筧幸次
    • Organizer
      第50回日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-23K22637
  • [Presentation] Effect of Post Treatment on Creep Properties of Ni Based Superalloy ・Inconel 718 Built up by selective laser melting2019

    • Author(s)
      T. Nagahari, Y.L. Kuo, K. Kakehi,
    • Organizer
      3rd International Symposium Additive Manufacturing, ISAM2019
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 不純物元素に対しロバストな積層造形ニッケル基超合金の創成2018

    • Author(s)
      筧 幸次
    • Organizer
      日本学術振興会耐熱金属材料第123委員会
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 耐熱合金の3D積層造形の現状と課題2018

    • Author(s)
      筧 幸次
    • Organizer
      日本ガスタービン学会主催ガスタービンセミナー
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] SLM法におけるプロセスパラメータがNi基超合金IN718の欠陥および機械的特性に及ぼす影響2018

    • Author(s)
      近藤研志,筧幸次,An-Chou Yeh
    • Organizer
      第46回日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Microstructure and mechanical properties of Ni-base superalloys fabricated by selective laser melting2018

    • Author(s)
      K.Kakehi
    • Organizer
      CAMS 2018, Advancing Materials and Manufacturing
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 酸素・窒素に対しロバストな積層造形ニッケル基超耐熱合金開発2018

    • Author(s)
      筧 幸次
    • Organizer
      粉体粉末冶金協会粉末積層3D技術員会
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] SLM積層造形法を用いて作製した固溶強化型Ni基超合金IN625のクリープ特性と組織2018

    • Author(s)
      磯部諒也,筧幸次
    • Organizer
      日本学術振興会耐熱金属材料第123委員会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Influence of Powder Surface Oxides on the Microstructure of Ni-based Alloys Fabricated by SPS and Additive Manufacturing2018

    • Author(s)
      Hao Yu, Shigenari Hayashi, Koji Kakehi
    • Organizer
      耐熱金属材料第123委員会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] SLM法とHIP法により作製したNi基超合金CM247LCの組織と機械的特性2018

    • Author(s)
      平井篤志,郭妍伶、筧幸次
    • Organizer
      第46回日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] SLM法により積層造形した高強度ステンレス鋼の強度と組織2017

    • Author(s)
      秋野一輝,筧幸次
    • Organizer
      日本金属学会第160回春季講演大会
    • Place of Presentation
      首都大学東京南大沢キャンパス
    • Year and Date
      2017-03-15
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 電子ビーム溶融法および選択的レーザ溶融法積層造形したニッケル基超合金;の組織と特性2017

    • Author(s)
      筧幸次
    • Organizer
      Arcam/GE-HTL セミナー
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] EBM・SLM積層法により造形したSUS316Lステンレス鋼の強度特性および組織2017

    • Author(s)
      秋野一輝,筧幸次
    • Organizer
      日本金属学会第161回春季講演大会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 選択的レーザー溶融法により積層造形されたγ'析出型Ni基超合金IN939の高温強度と微視組織2017

    • Author(s)
      平塚耀,筧幸次
    • Organizer
      日本金属学会第161回春季講演大会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] レーザー走査方法が積層造形Ni基超合金の組織と機械特性に及ぼ影響2017

    • Author(s)
      堀川将大,筧幸次
    • Organizer
      日本金属学会第160回春季講演大会
    • Place of Presentation
      首都大学東京南大沢キャンパス
    • Year and Date
      2017-03-15
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Microstructure and high-temperature strengths of IN718 built up by DMLS additive manufacturing2017

    • Author(s)
      Y.L Kuo, K. Kakehi
    • Organizer
      The 4th International Conference on Powder Metallurgy in Asia
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Microstructure and mechanical properties of Alloy718 built up by additive manufacturing processes: a comparison between EBM and SLM2017

    • Author(s)
      Y.L. Kuo, A. Kamigaichi, K. Kakehi
    • Organizer
      IUMRS-ICAM 2017
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Ni基超合金の積層造形2017

    • Author(s)
      筧幸次
    • Organizer
      第68回塑性加工連合講演会,
    • Invited
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] EBM・SLM積層法により造形したSUS316Lステンレス鋼の強度特性および組織2017

    • Author(s)
      秋野一輝,筧幸次
    • Organizer
      日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 選択的レーザ溶融法および電子ビーム溶融法で積層造形したIN718の クリープ特性2017

    • Author(s)
      上垣内梓,郭妍伶,筧幸次
    • Organizer
      日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 選択的レーザー溶融法により積層造形されたγ'析出型Ni基超合金IN939の高温強度と微視組織2017

    • Author(s)
      筧幸次,平塚 耀
    • Organizer
      日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 電子ビーム積層造形Inconel 718のクリープ特性2017

    • Author(s)
      上垣内梓,堀川将大,筧幸次
    • Organizer
      日本金属学会第160回春季講演大会
    • Place of Presentation
      首都大学東京南大沢キャンパス
    • Year and Date
      2017-03-15
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Effect of Oxides Formed on Raw Powders on the Microstructure of Consolidated Ni-based Alloys2017

    • Author(s)
      Hao Yu, Shigenari Hayashi, Koji Kakehi
    • Organizer
      日本金属学会2018年春期(第162回)講演大会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 選択的レーザー溶融法を用いて積層造形した固溶強化型Ni基超合金IN625の高温強度と組織2017

    • Author(s)
      磯部諒也,筧幸次
    • Organizer
      日本ガスタービン学会定期講演会
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Microstructure and mechanical properties of Alloy718 built up by additive manufacturing processes: a comparison between EBM and SLM2017

    • Author(s)
      Yen-Ling Kuo, A. Kamigaichi, S. Horikawa, K. Kakehi
    • Organizer
      IUMRS International Conference in Asia
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] The unexpected precipitation and recrystallization in Ni-base superalloys fabricated by selective laser melting,2017

    • Author(s)
      K. Kakehi, Y.L. Kuo
    • Organizer
      IUMRS International Conference in Asia
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Ti-6Al-4V積層造形材のクリープ特性と微視組織2016

    • Author(s)
      櫻井勇也, 筧 幸次
    • Organizer
      第44回ガスタービン学会定期公演会
    • Place of Presentation
      ホテルリッチ&ガーデン酒田
    • Year and Date
      2016-10-26
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] SUS316Lステンレス積層造形材の強度と組織2016

    • Author(s)
      秋野一輝,筧幸次
    • Organizer
      第44回ガスタービン学会定期公演会
    • Place of Presentation
      ホテルリッチ&ガーデン酒田
    • Year and Date
      2016-10-26
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] レーザービーム積層造形法により作製したIN718の組織と強度特性2016

    • Author(s)
      堀川将大,郭妍伶,筧幸次
    • Organizer
      第44回日本ガスタービン学会定期公演会
    • Place of Presentation
      ホテルリッチ&ガーデン酒田
    • Year and Date
      2016-10-26
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] Microstructure and mechanical properties of IN 718 built up by direct metal laser sintering2016

    • Author(s)
      Y.L Kuo, K. Kakehi
    • Organizer
      The 3rd International Congress on 3D Materials Science
    • Place of Presentation
      Illinois, USA
    • Year and Date
      2016-06-10
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] 単結晶Ni基超合金のクリープ挙動に及ぼすReの影響2016

    • Author(s)
      大橋健史,野村直輝,筧幸次
    • Organizer
      第44回ガスタービン学会定期公演会
    • Place of Presentation
      ホテルリッチ&ガーデン酒田
    • Year and Date
      2016-10-26
    • Data Source
      KAKENHI-PROJECT-16K06799
  • [Presentation] PREP粉末から作製したPM718鍛造材の強度特性2014

    • Author(s)
      西牧智大,筧幸次,同和鍛造河上裕介,金属技研近藤大介
    • Organizer
      日本金属学会春期講演大会(第154回)
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] PREP粉末から作製したPM718鍛造材の強度特性2014

    • Author(s)
      西牧智大,筧幸次,河上裕介,近藤大介
    • Organizer
      日本金属学会春期講演大会(第154回)
    • Place of Presentation
      東工大
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 省Re単結晶Ni基超合金の750℃におけるクリープ挙動2014

    • Author(s)
      塩沢駿,筧 幸次,津野 展康,高橋聰
    • Organizer
      日本金属学会春期講演大会(第154回)
    • Place of Presentation
      東工大
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 省Re単結晶Ni基超合金の750℃におけるクリープ挙動2014

    • Author(s)
      塩沢駿,筧幸次,津野展康,高橋聰
    • Organizer
      日本金属学会春期講演大会(第154回)
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] インコネル718の強度特性に及ぼす熱処理と低融点元素の影響2013

    • Author(s)
      田代雄真,筧幸次
    • Organizer
      日本機械学会,第21回機械材料・加工技術講演会(M&P2013)
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] インコネル718の強度特性に及ぼす熱処理と低融点元素の影響2013

    • Author(s)
      田代雄真,筧幸次
    • Organizer
      日本機械学会,第 21回機械材料・加工技術講演会(M&P2013)
    • Place of Presentation
      首都大
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 熱プラズマ液滴製錬を施した粉末をHIP焼結したP/M 718材の組織と延性2013

    • Author(s)
      中山義博,筧幸次,近藤大介
    • Organizer
      日本機械学会第 21回機械材料・加工技術講演会(M&P2013)
    • Place of Presentation
      首都大
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造Ni基超合金Inconel 718の強度特性に及ぼす低融点元素の影響2013

    • Author(s)
      飯島有理,橋向智弘,筧幸次
    • Organizer
      日本金属学会春期大会
    • Place of Presentation
      東京理科大学
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 熱プラズマ液滴製錬を施した粉末をHIP焼結したP/M 718材の組織と延性2013

    • Author(s)
      中山 義博,筧 幸次,近藤 大介
    • Organizer
      日本金属学会秋期講演大会(第153回)
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 熱プラズマ液滴製錬を施した粉末をHIP焼結したP/M 718材の組織と延性2013

    • Author(s)
      中山義博,筧幸次,近藤大介
    • Organizer
      日本金属学会秋期講演大会(第153回)
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 熱プラズマ液滴製錬を施した粉末をHIP焼結したP/M 718材の組織と延性2013

    • Author(s)
      中山義博,筧幸次,近藤大介
    • Organizer
      日本機械学会第21回機械材料・加工技術講演会(M&P2013)
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造Ni基超合金Inconel 718の強度特性に及ぼす低融点元素の影響2013

    • Author(s)
      飯島有理,橋向智弘,筧幸次
    • Organizer
      日本金属学会春期大会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] Anisotropic creep properties of aluminized Ni-based single crystal superalloy2013

    • Author(s)
      F.H.Latief, K.Kakehi
    • Organizer
      JSME Kanto Branch meeting
    • Year and Date
      2013-03-15
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造Ni基超合金の延性に及ぼす昇温履歴の影響2013

    • Author(s)
      飯島 有理,橋向 智弘,筧幸次
    • Organizer
      日本金属学会秋期講演大会(第153回)
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造Ni基超合金の延性に及ぼす昇温履歴の影響2013

    • Author(s)
      飯島有理,橋向智弘,筧幸次
    • Organizer
      日本金属学会秋期講演大会(第153回)
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造Ni基超合金のひずみ時効割れ感受性2012

    • Author(s)
      橋向智弘,筧幸次
    • Organizer
      日本金属学会秋期大会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] Detrimental zone and its effect on creep behavior of aluminized Ni-base single crystal superalloys in (100) and (110) orientations2012

    • Author(s)
      F. H. Latief, K. Kakehi, H. Murakami
    • Organizer
      13th World Conference on Investment Casting & Exhibition
    • Place of Presentation
      Kyoto
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] δ-subsolvus温度でHIP焼結したP/M 718の特性2012

    • Author(s)
      鈴木千明,筧幸次,近藤 大介
    • Organizer
      日本金属学会秋期大会
    • Place of Presentation
      愛媛大学
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] δ-subsolvus温度でHIP焼結したP/M 718の特性2012

    • Author(s)
      鈴木千明,筧幸次,近藤大介
    • Organizer
      日本金属学会秋期大会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] Role of detrimental zone on creep behavior of aluminized Ni-base single crystal superalloys in (100) and (110) orientations2012

    • Author(s)
      F. H. Latief, K. Kakehi, H. Murakami
    • Organizer
      NIMS 2012 International Conference (Structural Materaials Science and Strategy for Sustainability -Back to the Basics-)
    • Place of Presentation
      Tsukuba
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造Ni基超合金のひずみ時効割れ感受性2012

    • Author(s)
      橋向智弘,筧幸次
    • Organizer
      日本金属学会秋期大会
    • Place of Presentation
      愛媛大学
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] Inconel718の微視組織が及ぼす溶接特性について2011

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Organizer
      日本金属学会秋期大会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] Inconel718 の微視組織が及ぼす溶接特性について2011

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Organizer
      日本金属学会秋期大会
    • Place of Presentation
      沖縄コンベンションセンター
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 台湾における航空機部品製造関連産業2011

    • Author(s)
      筧幸次
    • Organizer
      東京都航空機産業支援事業課題検討会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 台湾航空機部品サプライチェーン連合と連携した航空機部品高度加工プロセスの研究2011

    • Author(s)
      筧幸次
    • Organizer
      都市科学連携機構施策提案発表会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造用Ni基超合金Inconel 718の溶接特性2011

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Organizer
      日本学術振興会第123委員会
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] 溶解鍛造用Ni基超合金Inconel 718の溶接特性2011

    • Author(s)
      石井克佳,筧幸次,米本朋弘
    • Organizer
      日本学術振興会第123委員会
    • Place of Presentation
      東京工業大学
    • Data Source
      KAKENHI-PROJECT-23560844
  • [Presentation] {111}〈112〉すべり系に対する分解せん断応力一定で行った単結晶Ni基超合金のクリープ2009

    • Author(s)
      浅利康基, 筧幸次
    • Organizer
      日本金属学会2009年春期講演大会
    • Place of Presentation
      東工大
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 中温域における超合金の強度に及ぼす結晶異方性の影響(基調講演)2009

    • Author(s)
      筧幸次, C. M. F. Rae, R. C. Reed
    • Organizer
      日本金属学会2009年春期講演大会
    • Place of Presentation
      東工大
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 単結晶Ni基超合金クリープ強度に及ぼすRu添加の影響2009

    • Author(s)
      島林俊介, 筧幸次, C. M. F. Rae, 橋詰良吉
    • Organizer
      日本金属学会2009年春期講演大会
    • Place of Presentation
      東工大
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] {111}<112>すべり系に対する分解せん断応力一定で行った単結晶Ni基超合金のクリープ2009

    • Author(s)
      浅利康基, 筧幸次
    • Organizer
      日本金属学会2009年春期講演大会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 単結晶Ni基超合金クリープ強度に及ぼすRu添加の影響2009

    • Author(s)
      島林俊介, 筧幸次
    • Organizer
      日本金属学会春期講演大会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 中温域における超合金の強度に及ぼす結晶異方性の影響(基調講演)2009

    • Author(s)
      筧幸次
    • Organizer
      日本金属学会春期講演大会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 単結晶Ni基超合金クリープ強度に及ぼすRu添加の影響2008

    • Author(s)
      島林俊介, 筧幸次
    • Organizer
      「耐熱鋼および耐熱合金の組織安定性と寿命推定」フォーラム
    • Place of Presentation
      日本鉄鋼協会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 構造用鋼における熱処理後の機械的特性推定法の開発2008

    • Author(s)
      渡邉哲史, 筧幸次, 竹野裕之, 吉田功
    • Organizer
      日本鉄鋼協会第155回春季講演大会
    • Place of Presentation
      武蔵工業大学
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 構造用鋼における熱処理後の機械的特性推定法の開発2008

    • Author(s)
      渡邉哲史・筧幸次, トピー 竹野裕之・吉田功
    • Organizer
      日本鉄鋼協会第155回春季講演大会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] {111}<112>すべり系に対する分解せん断応力一定で行った単結晶Ni基超合金のクリープ2008

    • Author(s)
      浅利康基, 筧幸次
    • Organizer
      日本金属学会先進材料の高温強度と組織研究会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 単結晶Ni基超合金のクリープ強度に及ぼすRu添加の影響2008

    • Author(s)
      島林俊介, 筧幸次
    • Organizer
      日本金属学会先進材料の高温強度と組織研究会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 耐酸化コーティングを施した単結晶Ni基超合金のクリープ特性に及ぼす結晶二次方位の影響2008

    • Author(s)
      上原慎矢, 筧幸次, 村上秀之
    • Organizer
      2008年春季大会日本金属学会講演大会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 単結晶Ni基超合金クリープ強度に及ぼすRu添加の影響, 日本鉄鋼協会「耐熱鋼および耐熱合金の組織安定性と寿命推定」フォーラム2008

    • Author(s)
      島林俊介, 筧幸次, C. M. F. Rae, 橋詰良吉
    • Organizer
      日本鉄鋼協会「耐熱鋼および耐熱合金の組織安定性と寿命推定」フォーラム
    • Place of Presentation
      名古屋工業大学
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] タービンディスク材U720Liの疲労強度に及ぼす組織の影響2008

    • Author(s)
      林啓介, 筧幸次
    • Organizer
      日本金属学会先進材料の高温強度と組織研究会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] U720Liの機械的特性に及ぼす熱処理の影響2007

    • Author(s)
      磯田 康二, 坪井悠介, 筧 幸次
    • Organizer
      第35回ガスタービン定期講演会
    • Place of Presentation
      岐阜大学
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 航空機エンジン用耐熱合金の高温強度2007

    • Author(s)
      筧幸次
    • Organizer
      第133回超組成研究会
    • Place of Presentation
      首都大学東京
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 航空機エンジン用耐熱合金の高温強度2007

    • Author(s)
      筧幸次
    • Organizer
      第133回超塑性研究会
    • Data Source
      KAKENHI-PROJECT-19560706
  • [Presentation] 耐酸化コーティングを施した単結晶Ni基超合金のクリープ特性に及ぼす結晶二次方位の影響2007

    • Author(s)
      上原慎矢, 筧幸次, 村上秀之
    • Organizer
      第45回高温強度シンポジウム前刷集
    • Data Source
      KAKENHI-PROJECT-19560706
  • 1.  YOSHIBA Masayuki (30094288)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 2.  TAKAHASHI Satoru (80260785)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 3.  OKAZAKI Masakazu (00134974)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 4.  SAKANE Masao (20111130)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 5.  KITAMURA Takayuki (20169882)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 6.  YAMADA Yasuhiro (70291755)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 7.  TADA Yaoya (70243053)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 8.  SAKAKI Tsuneaki (50083332)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 9.  Kitazono Koichi (20321573)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  村上 秀之 (30212252)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 5 results
  • 11.  角田 直人 (70345437)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 12.  TAMAKI Hideki
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  KAWAHARA Yuuzo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  MOTOI Akio
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  ISOMOTO Tatsuro
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  ISHITSUKA Tetsuo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi