Kato Masahiko 加藤昌彦

… Alternative Names

KATO MASAHIKO 加藤昌彦

KATO Masahiko 加藤昌彦

Less

Researcher Number	70274115
Other IDs
External Links
Affiliation (Current)	2025: 福山大学, 工学部, 教授
Affiliation (based on the past Project Information) *help	2017 – 2020: 福山大学, 工学部, 教授 2016: 広島大学, 工学研究院, 准教授 2015: 広島大学, 大学院工学研究院, 准教授 2013 – 2015: 広島大学, 工学(系)研究科(研究院), 准教授 2010 – 2011: Hiroshima University, 大学院・工学研究院, 准教授 … More 2007 – 2009: Hiroshima University, Graduate School of Engineering, Associate Professor 2008: 広島大学, 大学院工学研究科, 准教授 2005 – 2006: 広島大学, 大学院工学研究科, 助教授 2005: 広島大学, 大学院工学研究科, 助手 2001 – 2004: 広島大学, 大学院・工学研究科, 助手 2000: 広島大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Design engineering/Machine functional elements/Tribology / Material processing/treatments / Materials/Mechanics of materials Except Principal Investigator Materials/Mechanics of materials / Materials/Mechanics of materials / Material processing/treatments / Production engineering/Processing studies
Keywords	Principal Investigator SiC / はく離 / ナノワイヤ / プラズマ放電 / スパッタ / はく離強度 / SiC薄膜 / 摩擦・摩耗 / コーティング / ヘリコンスパッタ … More / プラズマ加工 / トライボロジー / ステンレス / 摩擦 / 摩擦係数 / Friction and wear / Souttering / プラズマプロセス / 薄膜 / 微細円錐状突起物 / はく離エネルギ / 微細円錐突起物 / アンカー効果 / 界面制御 / 低摩擦係数 / 摩擦・摩耗試験 / アモルファス / 超低摩擦係数 / 界面破壊靭性値 / 摩擦・摩耗特性 / アモルファスSiC / イオン注入 … More Except Principal Investigator 疲労き裂発生 / 損傷機構同定 / 結晶方位解析 / 微視的観察 / FRICTION AND WEAR / NANOINDENTATION / DYNAMIC BEHAVIOUR / MICRO-MATERIALS / SPUTTER / イオン注入 / 摩擦・磨耗 / 摩擦・摩耗 / ナノインデンテーション / 動的特性 / マイクロマテリアル / スパッタ / EDGE INDENT TEST / IN-SITU MEASUREMENT / DELAMINATION STRENGTH / HIGH TEMPERATURE / CERAMICS / エッジインデント試験 / その場測定 / はく離強度 / 高温 / セラミックス / 革新接合材 / 摩擦撹拌継手 / 溶接継手 / 疲労き裂進展 / 疲労寿命評価 / 内部観察 / 疲労損傷機構 / 接合材 / 転位 / 屈曲挙動 / き裂進展挙動 / 損傷機構同定転位 / すべり挙動 / 原子間力顕微鏡 / 機械的性質 / 円錐形突起物 / ナノ材料 / プラズマ加工 / 構造・機能材料 / リサイクル性 / 寿命評価 / 微小疲労き裂進展 / ナノ結晶材料 / 析出物 / 突起物 / 円錐 / 鉄鋼材料 / スパッタエッチング / コーティング / 溶着性 / 摩擦低減 / 切削工具 / 炭化珪素 / アモルファス Less

Development of low friction coefficient film by fine projectionPrincipal Investigator
- Principal Investigator
  
  KATO MASAHIKO
- Project Period (FY)
  2017 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Fukuyama University
Development of Evaluation Method of Film Delamination Strength, and Improvement by Nano-wirePrincipal Investigator
- Principal Investigator
  
  Kato Masahiko
- Project Period (FY)
  2014 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Development of high-strength advanced joining technology by fatigue damage mechanism elucidation of joints on the basis of the microscopic internal observation
- Principal Investigator
  
  Sugeta Atsushi
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Development of Microscopic Observation system based on Atomic Force Microscopy of Fatigue Damage Process under Hydrogen Environment And Investigation of Damage Mechanism
- Principal Investigator
  
  SUGETA Atsushi
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Increase in Adhesion Strength of SiC Film with Super Low Friction Coefficient by Formation Technique of Nano-precipitates at InterfacePrincipal Investigator
- Principal Investigator
  
  KATO Masahiko
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Hiroshima University
EVALUATION OF MECHANICAL CHARACTERISTICS OF CONICAL PROTRUSIONS FORMED ON SURFACE OF STEELS BY SPUTTER-ETCHING
- Principal Investigator
  
  NAKASA Keijiro
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima Kokusai Gakuin University
微視損傷機構解明・結晶方位測定による高リサイクル性・耐損傷性ナノ結晶材の創製
- Principal Investigator
  
  SUGETA Atsushi
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University
Fabrication of SiC Film with Ultra-low Friction Coefficient and Evaluation of Friction Property and Delamination StrengthPrincipal Investigator
- Principal Investigator
  
  KATO Masahiko
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Hiroshima University
スパッタエッチングによる表面析出を利用した円錐形微小突起物の作製と形成機構解明
- Principal Investigator
  
  中佐啓治郎
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Hiroshima Kokusai Gakuin University
  Hiroshima University
超低摩擦アモルファス膜の終端原子制御を利用した極低溶着性工具の開発
- Principal Investigator
  
  山根八洲男
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Hiroshima University
ヘリコンスパッタによる超低摩擦SiC薄膜の作製及び摩擦係数・はく離強度評価Principal Investigator
- Principal Investigator
  
  加藤昌彦
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Hiroshima University
DEVELOPMENT OF HIGH-TEMPERATURE EDGE-INFDENT APPARATUS THATENABLES IN-SITU MEASUREMENT OF HIGH-TEMPERATURE DELAMINATION STRENGTH OF CERAMIC COATING
- Principal Investigator
  
  NAKASA Keijiro
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
EVALUATION OF DYNAMIC BEHAVIOUR OF MICTOMATERIALS FABRICATED BY SPUTTEINR AND ION-IMPLANTATION METHODS
- Principal Investigator
  
  NAKASA Keijiro
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  HIROSHIMA UNIVERSITY
ヘリコンスパッタ・イオン注入複合処理によるアモルファスSiC皮膜の作成及び評価Principal Investigator
- Principal Investigator
  
  加藤昌彦
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Hiroshima University

All 2020 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2005 Other

All Journal Article Presentation

[Journal Article] Effects of Loading Mode on the Fatigue Behavior of Laser Welds in Automobile Mild Steel Sheet2016
- Author(s)
  M. Inohara, H. Akebono, M. Kato, A. Sugeta
- Journal Title
  
  Welding in the World
  
  Volume: in-Press
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25289009
[Journal Article] Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding2016
- Author(s)
  T. Abe, H. Akebon, M. Kato, A. Sugeta
- Journal Title
  
  Fracture and Structural Integrity
  
  Volume: 35 Pages: 424-433
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25289009
[Journal Article] Fatigue Damage Evaluation of Friction Stir Spot Welded Cross-Tension Joints Under Repeated Two-Step Force Amplitudes2015
- Author(s)
  Sutep Joy-A-Ka, Y. Ogawa, H. Akebono, M. Kato, A. Sugeta, Y. Sun, H. Fujii
- Journal Title
  
  Journal of materials engineering and performance
  
  Volume: 24 Issue: 6 Pages: 2494-2502
- DOI
  10.1007/s11665-015-1534-x
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289009
[Journal Article] Cumulative Fatigue Damage Evaluations on Spot-Welded Joints Using 590 MPa-class Automobile Steel2015
- Author(s)
  R.Tanegashima, I.Ohara, H.Akebono, M.Kato, A.Sugeta
- Journal Title
  
  Fatigue & Fracture of Engineering Materials & Structures
  
  Volume: 38 Issue: 7 Pages: 870-879
- DOI
  10.1111/ffe.12258
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289009
[Journal Article] 300MPa級SPCCを母材とする十字引張型スポット溶接継手の三次元的内部疲労損傷挙動および疲労特性に及ぼす模擬溶接欠陥の影響2014
- Author(s)
  大原一郎，種子島亮太，曙　紘之，加藤昌彦，菅田　淳
- Journal Title
  
  自動車技術会論文集
  
  Volume: 45 Pages: 903-908
- NAID
  130006319469
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-25289009
[Journal Article] 3-Dimensional Observation of the Interior Fracture Mechanism and Establishment of Cumulative Fatigue Damage Evaluation on Spot Welded Joints Using 590 MPa-class Steel, International Journal of Fatigue2013
- Author(s)
  R.Tanegashima, H. Akebono, M.Kato, A.Sugeta
- Journal Title
  
  International Journal of Fatigue
  
  Volume: (Accepted) Pages: 121-131
- DOI
  10.1016/j.ijfatigue.2012.12.014
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11J07239, KAKENHI-PROJECT-25289009
[Journal Article] Measurement of Delamination Energy of Sputtered SiC Film Coated on Tool Steel Substrate2010
- Author(s)
  Masahiko KATO, Koumei FUJIOKA, Hiroyuki AKEBONO, Atsushi SUGETA
- Journal Title
  
  Journal of JSEM vol.10
  
  Pages: 141-145
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560134
[Journal Article] Measurement of Delamination Energy of Sputtered SiC Film Coated on Tool Steel Substrate2010
- Author(s)
  Masahiko KATO, Koumei FUJIOKA, Hiroyuki AKEBONO, Atsushi SUGETA
- Journal Title
  
  Journal of JSEM
  
  Volume: 10 Pages: 141-145
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560134
[Journal Article] Effect of Intermediate Layer on Wear-delamination Life of Low-frictional SiC-2.6mass% Ti Film Sputter-deposited on Titanium Substrate2010
- Author(s)
  Jin-Hua Zheng, Masahiko Kato, Keijiro Nakasa
- Journal Title
  
  Surface & Coatings Technology
  
  Volume: 205 Pages: 2532-2537
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560134
[Journal Article] 荷重制御下の繰返し圧子押込みによるTiNおよびSiCスパッタ薄膜のはく離特性評価2008
- Author(s)
  加藤昌彦
- Journal Title
  
  材料 (掲載決定)
- NAID
  130002085663
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560134
[Journal Article] 中高温下におけるP/Mアルミニウム合金のき裂発生および初期き裂進展挙動2008
- Author(s)
  菅田淳, 加藤昌彦, 曙紘之
- Journal Title
  
  日本材料学会第57期学術講演論文集 No. 57-1
  
  Pages: 139-140
- Data Source
  KAKENHI-PROJECT-18360060
[Journal Article] 絶縁被膜層を有する軟磁性粉末冶金合金の疲労特性2008
- Author(s)
  菅田淳, 加藤昌彦, 曙紘之
- Journal Title
  
  日本材料学会第57期学術講演論文集 No. 57-1
  
  Pages: 149-150
- Data Source
  KAKENHI-PROJECT-18360060
[Journal Article] Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load2007
- Author(s)
  K. Nakasa, M. Kato, J. Zheng
- Journal Title
  
  Key Engineering Materials 345-346
  
  Pages: 669-672
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560134
[Journal Article] Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load2007
- Author(s)
  K., Nakasa, M., Kato, J., Zheng
- Journal Title
  
  Key Engineering Materials 345-346
  
  Pages: 669-672
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560134
[Journal Article] 高周波マグネトロン同時スパッタ法により形成したSiC-TiおよびSiC-Al薄膜の摩擦および摩耗特牲2005
- Author(s)
  加藤昌彦, 中佐啓治郎, 鄭錦華, 廣田悟史
- Journal Title
  
  日本機械学会論文集(A編) 71・702
  
  Pages: 359-366
- Data Source
  KAKENHI-PROJECT-15760542
[Journal Article] 荷重制御下の繰返し圧子押込みによるTiNおよびSiCスパッタ薄膜のはく離特性評価
- Author(s)
  加藤昌彦, 中佐啓治郎, 李明, 章博
- Journal Title
  
  材料 (掲載決定)
- NAID
  130002085663
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560134
[Journal Article] Evaluation of Delamination Characteristics of TIN and SiC Sputtered Thin Films by Cyclic Indentation under Load Control
- Author(s)
  Masahiko, KATO, Keijiro, NAKASA, Ming, LI, Bo, ZHANG
- Journal Title
  
  Journal of Materials Science, Japan (In Press)
- NAID
  130002085663
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560134
[Presentation] ナノワイヤにより凹凸を形成したSiC薄膜の摩擦係数評価2020
- Author(s)
  加藤昌彦，小林健吾
- Organizer
  日本機械学会2020年度年次大会
- Data Source
  KAKENHI-PROJECT-17K06054
[Presentation] マイクロ円環圧縮試験法によるSiC薄膜のはく離強度評価2016
- Author(s)
  前川明紀，加藤昌彦，曙紘之，菅田淳
- Organizer
  日本機械学会M&M2016材料力学カンファレンス
- Place of Presentation
  神戸大学
- Year and Date
  2016-10-08
- Data Source
  KAKENHI-PROJECT-26420016
[Presentation] Fatigue Properties and Fracture Mechanism of Load Carrying Type Fillet Joints with One-sided Welding2015
- Author(s)
  T. Abe, H. Akebono, M. Kato, A. Sugeta
- Organizer
  The 5th International Conference on Crack Paths
- Place of Presentation
  Ferrara, Italy
- Year and Date
  2015-09-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] 300MPa級冷間圧延鋼板を母材とした十字引張型摩擦撹拌点接合継手の変動荷重下における疲労特性2015
- Author(s)
  魚谷智之，Sutep Joy-A-Ka，曙紘之，加藤昌彦，菅田淳，孫玉峰，藤井英俊
- Organizer
  第14回機械，構造物の強度設計・安全性評価に関するシンポジウム
- Place of Presentation
  京都
- Year and Date
  2015-10-15
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] 摩擦撹拌点接合によるアルミニウム合金／CFRP異材接合継手の疲労強度評価2015
- Author(s)
  小川裕樹，曙紘之，加藤昌彦，田中耕二郎，菅田淳
- Organizer
  日本材料学会第64期学術講演会
- Place of Presentation
  山形
- Year and Date
  2015-05-22
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] Fatigue Damage Evaluation of Friction Stir Spot Welded AISI 1012 Cold Rolled-steel under Repeated Two-step Force Amplitudes2015
- Author(s)
  Sutep Joy-A-Ka, Y. Ogawa, H. Akebono, M. Kato, A. Sugeta, Y. Sun, H. Fujii
- Organizer
  Thailand Welding and Inspection Technology 2015
- Place of Presentation
  Pattaya, THAILAND
- Year and Date
  2015-12-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] 3-Dimensional Observation of the Interior Fatigue Fracture Mechanism on Friction Stir Spot Welded AISI 1012 Cold Rolled-steel2015
- Author(s)
  Sutep Joy-A-Ka, Y. Ogawa, H. Akebono, M. Kato, A. Sugeta, Y. Sun, H. Fujii
- Organizer
  Thailand Welding and Inspection Technology 2015
- Place of Presentation
  Pattaya, THAILAND
- Year and Date
  2015-12-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] き裂前縁形状とすべり面の相対関係に着目したα黄銅の微小疲労き裂進展屈曲機構の検討2012
- Author(s)
  馬場健太, 曙紘之, 加藤昌彦, 菅田淳
- Organizer
  日本機械学会中国四国支部講演会
- Place of Presentation
  東広島市
- Year and Date
  2012-03-08
- Data Source
  KAKENHI-PROJECT-21656035
[Presentation] AFMによるTi-6Al-4V合金における疲労き裂発生挙動の観察2011
- Author(s)
  櫻井尚行, 曙紘之, 加藤昌彦, 菅田淳
- Organizer
  日本機械学会M & M' 2011
- Place of Presentation
  北九州市
- Year and Date
  2011-07-16
- Data Source
  KAKENHI-PROJECT-21656035
[Presentation] Ti-6Al-4V合金の疲労き裂発生挙動のAFMによる観察2011
- Author(s)
  櫻井尚行, 曙紘之, 加藤昌彦, 菅田淳
- Organizer
  日本機械学会中国四国学生会第41回研究発表講演会
- Place of Presentation
  岡山市
- Year and Date
  2011-03-05
- Data Source
  KAKENHI-PROJECT-21656035
[Presentation] α-黄銅の微小疲労き裂発生および進展挙動の原子間力顕微鏡その場観察2010
- Author(s)
  馬場健太, 曙紘之, 加藤昌彦, 菅田淳
- Organizer
  日本機械学会中国四国学生会第40回研究発表講演会
- Place of Presentation
  山口市
- Year and Date
  2010-03-08
- Data Source
  KAKENHI-PROJECT-21656035
[Presentation] SiCスパッタ薄膜のはく離強度に及ぼす界面微細突起物の影響2010
- Author(s)
  加藤昌彦, 林真人, 曙紘之, 菅田淳
- Organizer
  日本材料学会第59期学術講演会
- Place of Presentation
  北海道大学
- Year and Date
  2010-05-22
- Data Source
  KAKENHI-PROJECT-20560134
[Presentation] 下地表面に形成させた微細突起物がSiC薄膜のはく離強度に及ぼす影響2009
- Author(s)
  林真人, 加藤昌彦, 曙紘之, 菅田淳
- Organizer
  日本鉄鋼協会・日本金属学会中国四国支部鉄鋼第52回・金属第49回合同講演大会
- Place of Presentation
  高松市
- Year and Date
  2009-08-06
- Data Source
  KAKENHI-PROJECT-20560134
[Presentation] Improvement of Delamination Energy of Sputtered SiC Film by Forming Conical Precipitates at Interface2009
- Author(s)
  加藤昌彦, 林真人, 曙紘之, 菅田淳
- Organizer
  4th International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics
- Place of Presentation
  新潟市
- Year and Date
  2009-11-28
- Data Source
  KAKENHI-PROJECT-20560134
[Presentation] Improvement of Delamination Energy of Sputtered SiC Film by Forming Conical Precipitates at Interface2009
- Author(s)
  加藤昌彦, 林真人, 曙紘之, 菅田淳
- Organizer
  4th International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics
- Place of Presentation
  Niigata
- Year and Date
  2009-11-28
- Data Source
  KAKENHI-PROJECT-20560134
[Presentation] ヘリコンスパッタSiC薄膜の摩擦・摩耗特性に及ぼす各種元素添加の影響2008
- Author(s)
  岩崎智史, 曙紘之, 加藤昌彦, 菅田淳
- Organizer
  日本機会学会中国四国支部第46期講演会
- Place of Presentation
  近畿大学(広島県)
- Year and Date
  2008-03-07
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560134
[Presentation] Influence of Elements addition on Friction and Wear properties of SiC Film Coated by Helicon Sputtering2008
- Author(s)
  S., Iwasaki, H., Akebono, M., Kato, A., Sugeta
- Organizer
  Nihon kikaigakkai chuugokushikokusibu dai 46 ki kouenkai
- Place of Presentation
  Kinki Univ. (Hiroshima)
- Year and Date
  2008-07-03
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560134
[Presentation] 微細円錐状突起物を形成させた基板に成膜したSiC薄膜のはく離強度評価2008
- Author(s)
  加藤昌彦
- Organizer
  日本材料学会第57期学術講演会
- Place of Presentation
  鹿児島県鹿児島市、鹿児島大学工学部
- Year and Date
  2008-05-14
- Data Source
  KAKENHI-PROJECT-19560103
[Presentation] スパッタエッチングにより形成された円錐状突起物のコーティング下地としての応用2008
- Author(s)
  加藤昌彦
- Organizer
  日本機械学会中国四国支部第46期総会・講演会
- Place of Presentation
  近畿大学工学部
- Year and Date
  2008-03-07
- Data Source
  KAKENHI-PROJECT-19560103
[Presentation] 微細円錐状突起物を形成させた基板に成膜したSiC薄膜のはく離強度評価2008
- Author(s)
  加藤昌彦
- Organizer
  日本材料学会第57期学術講演会
- Place of Presentation
  鹿児島市
- Year and Date
  2008-05-24
- Data Source
  KAKENHI-PROJECT-20560134
[Presentation] マイクロエッジインデント法によるSiC薄膜のはく離強度評価および界面微細円錐状突起物がSiC薄膜のはく離強度に及ぼす影響2008
- Author(s)
  加藤昌彦
- Organizer
  日本材料学会第4回マイクロマテリアルシンポジウム
- Place of Presentation
  東京都文京区
- Year and Date
  2008-09-24
- Data Source
  KAKENHI-PROJECT-20560134
[Presentation] 300MPa級冷間圧延鋼板を母材とした十字引張型摩擦撹拌点接合継手の一定および変動荷重下における疲労特性
- Author(s)
  池田真人，Sutep Joy-A-Ka，曙紘之，加藤昌彦，菅田淳，孫玉峰，藤井英俊
- Organizer
  第32回　疲労シンポジウム
- Place of Presentation
  高山市民文化会館(岐阜）
- Year and Date
  2014-11-06 – 2014-11-08
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] Fatigue Fracture Mechanism on Friction Stir Spot Welded Joints Using 300MPa-Class Automobile Steel Sheets under Constant and Variable Force Amplitude
- Author(s)
  Sutep Joy-A-Ka, Yuki Ogawa, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta, Yu feng Sun and Hidetoshi Fujii
- Organizer
  20th European Conference on Fracture
- Place of Presentation
  トロンハイム(ノルウェー）
- Year and Date
  2014-06-30 – 2014-07-04
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] 自動車用軟鋼板を母材とするレーザー接合材の疲労特性に及ぼす負荷様式の影響
- Author(s)
  猪原正義，種子島亮太，曙紘之，加藤昌彦，菅田淳
- Organizer
  自動車技術会2014年度春季大会
- Place of Presentation
  パシフィコ横浜(神奈川）
- Year and Date
  2014-05-21 – 2014-05-23
- Data Source
  KAKENHI-PROJECT-25289009
[Presentation] 300MPa級冷間圧延鋼板SPCCを母材とするスポット溶接継手の疲労特性に及ぼす模擬溶接欠陥の影響
- Author(s)
  大原一郎，種子島亮太，曙紘之，加藤昌彦，菅田淳
- Organizer
  自動車技術会2014年度春季大会
- Place of Presentation
  パシフィコ横浜(神奈川）
- Year and Date
  2014-05-21 – 2014-05-23
- Data Source
  KAKENHI-PROJECT-25289009

1. SUGETA Atsushi (60162913)

# of Collaborated Projects: 6 results

# of Collaborated Products: 29 results
2. NAKASA Keijiro (80034370)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
3. AKEBONO Hiroyuki (50447215)

# of Collaborated Projects: 4 results

# of Collaborated Products: 22 results
4. WANG Rongguang (30363021)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. NISHINO Nobuhiro (70243590)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 山根八洲男 (70140564)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 關谷克彦 (80226662)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. NISHIDA hidetaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Kato Masahiko 加藤 昌彦

KATO MASAHIKO 加藤 昌彦

KATO Masahiko 加藤 昌彦

Research Projects

Research Products

Co-Researchers

Development of low friction coefficient film by fine projectionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Evaluation Method of Film Delamination Strength, and Improvement by Nano-wirePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Increase in Adhesion Strength of SiC Film with Super Low Friction Coefficient by Formation Technique of Nano-precipitates at InterfacePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of SiC Film with Ultra-low Friction Coefficient and Evaluation of Friction Property and Delamination StrengthPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ヘリコンスパッタによる超低摩擦SiC薄膜の作製及び摩擦係数・はく離強度評価Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ヘリコンスパッタ・イオン注入複合処理によるアモルファスSiC皮膜の作成及び評価Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Kato Masahiko 加藤昌彦

KATO MASAHIKO 加藤昌彦

KATO Masahiko 加藤昌彦