Murashima Motoyuki 村島基之

Researcher Number	70779389
Other IDs
Affiliation (Current)	2025: 東北大学, 工学研究科, 准教授
Affiliation (based on the past Project Information) *help	2022 – 2024: 東北大学, 工学研究科, 准教授 2016 – 2021: 名古屋大学, 工学研究科, 助教
Review Section/Research Field	Principal Investigator Basic Section 18040:Machine elements and tribology-related / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields / Design engineering/Machine functional elements/Tribology Except Principal Investigator Design engineering/Machine functional elements/Tribology / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
Keywords	Principal Investigator トライボロジー / 添加剤 / 流体潤滑 / 能動的摩擦制御 / DLC膜 / 摩擦面リアクター / 油中添加剤 / トライボ被膜 / 油潤滑 / DC … More / 輸注添加剤 / DLC / 低摩擦 / 誘電体バリア放電 / 摩擦・摩耗 / 微小液滴 / 潤滑油 / その場観察 / 高粘度油滴 / 摩擦の能動的制御 / 交流電場 / 境界潤滑 / 誘電泳動 / 二液混合潤滑油 / 乾燥摩擦 / 損傷部回避 / 摩擦制御 / 損傷回避 / 機械学習 / 接触面積 / 接触 / 変形表面 / スマートサーフェス … More Except Principal Investigator カーボン系硬質膜 / ナノ構造層 / 超低摩擦 / トライボロジー / 摩擦面その場観察 / 潤滑油 / 誘電率 / 摩擦面その場評価 / ナノ構造変化層 / 摩擦 / 機械工学 / 工学 / その場計測 / プラズマ気相蒸着 / ダイヤモンドライクカーボン / プラズマ加工 / プラズマシミュレ―ション / プロズマCVD / シリコン含有ダイヤモンドラークカーボン膜 / プラズマ / マイクロ波 / Si-DLC膜 / シリコン含有ダイヤモンドライクカーボン膜 / 表面分析 / プラズマシミュレーション / スパッタリング / プラズマCVD / 低摩擦 / シリコン含有ダイヤモンドライクカーボン / 超高速成膜 Less

Lubricant-less super-environmental adaptive engineering brought by in-situ generation of lubricats on friction surfacesPrincipal Investigator
- Principal Investigator
  
  村島基之
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
- Research Institution
  Tohoku University
摩擦生成ナノ界面トライボ被膜の分析と高機能トライボ被膜の為のDLC炭素構造の解明Principal Investigator
- Principal Investigator
  
  村島基之
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Tohoku University
Development of lubricant additives delivery system with microdroplet using AC electric fieldPrincipal Investigator
- Principal Investigator
  
  Murasima Motoyuki
- Project Period (FY)
  2020 – 2021
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Nagoya University
Development of design proposal for ultla low friction by controlling of permittivity of nano transformed layer and adsorbed lubricants on carbonaceous hard coating
- Principal Investigator
  
  Umehara Noritsugu
- Project Period (FY)
  2018 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
- Research Institution
  Nagoya University
Invention of active morphing smart surface created by additive manufacturingPrincipal Investigator
- Principal Investigator
  
  Murashima Motoyuki
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Nagoya University
Building an academic foundation for balancing ultra-high-speed deposition and ultra-low friction of hard carbon-based coatings
- Principal Investigator
  
  Kousaka Hiroyuki
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Gifu University
Development of Smart Tribosystem with Friction Induced Transformed Thin Layers
- Principal Investigator
  
  Umehara Noritsugu
- Project Period (FY)
  2013 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Nagoya University

All 2023 2022 2021 2020 2019 2018 2017 2016

All Journal Article Presentation Patent

[Journal Article] Realization of near-less friction of ta-CNx coating under R32 refrigerant environment2022
- Author(s)
  Wooyoung Lee, Motoyuki Murashima, Noritsugu Umehara, Takayuki Tokoroyama, Norihisa Horaguchi, Takao Ishimoto
- Journal Title
  
  Tribology International
  
  Volume: 168 Pages: 107450-107450
- DOI
  10.1016/j.triboint.2022.107450
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H03751
[Journal Article] New in situ superlow-friction method for nitrogen-containing diamond-like carbon coatings using dielectric barrier discharge treatment in ambient air2022
- Author(s)
  Wu Wenjun、Murashima Motoyuki、Saso Tomohiro、Tokoroyama Takayuki、Lee Woo-Young、Kousaka Hiroyuki、Umehara Noritsugu
- Journal Title
  
  Tribology International
  
  Volume: 174 Pages: 107749-107749
- DOI
  10.1016/j.triboint.2022.107749
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K18751
[Journal Article] In situ observation of the formation of MoDTC-derived tribofilm on a ta-C coating using reflectance spectroscopy and its effects on friction2021
- Author(s)
  N. Hashizume, M. Murashima, N. Umehara, T. Tokoroyama and W-Y. Lee
- Journal Title
  
  Tribology International
  
  Volume: 162 Pages: 107128-107128
- DOI
  10.1016/j.triboint.2021.107128
- NAID
  120007192019
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18H03751
[Journal Article] Active Control of Hydrodynamic Lubrication Condition by Morphing Surface Created by 3D Printer2019
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Noritsugu Umehara, Takayuki Tokoroyama
- Journal Title
  
  Proc. Japan-Taiwan Tribology Symposium 2019,
  
  Volume: - Pages: 23-24
- Data Source
  KAKENHI-PROJECT-17K14577
[Journal Article] ベース油中CNxの摩擦界面その場反射分光分析による摩擦メカニズムの解明2019
- Author(s)
  岡本竜也，梅原徳次，村島基之，斉藤浩二，眞鍋和幹，林圭二
- Journal Title
  
  トライボロジスト
  
  Volume: 63 Pages: 755-767
- NAID
  130007511397
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18H03751
[Journal Article] Effect of Multiple Damages on AI Learning to Realize Stable Friction with Active Morphing Surface -Smart Surface-2019
- Author(s)
  Motoyuki Murashima, Takazumi Yamada, Noritsugu Umehara, Takayuki Tokoroyama
- Journal Title
  
  Proc. International Tribology Conference Sendai 2019
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14577
[Journal Article] Intelligent tribological surfaces: from concept to realization using additive manufacturing2019
- Author(s)
  Motoyuki Murashima, Shouta Yoshino, Masato Kawaguchi, Noritsugu Umehara
- Journal Title
  
  International Journal of Mechanics and Materials in Design
  
  Volume: 15 Pages: 757-766
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14577
[Journal Article] Clarification of effect of transformed layer and oil film on low friction coefficient of CNx coating in PAO oil lubrication by in-situ observation of friction area with reflectance spectroscopy2017
- Author(s)
  H. Nishimura, N. Umehara, H. Kousaka, M. Murashima
- Journal Title
  
  Tribology International
  
  Volume: 113 Pages: 383-388
- DOI
  10.1016/j.triboint.2016.10.029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25220902
[Journal Article] The effect of inner structures created by 3D-additive manufacturing on wear reduction of 3D printed material2017
- Author(s)
  Motoyuki Murashima
- Journal Title
  
  Proceedings of SAKURA Symposium on Mechanical Science and Engineering 2017
  
  Volume: 1 Pages: 39-41
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14577
[Journal Article] WEAR REDUCTION WITH INNER STRUCTURE MADE BY 3D PRINTER2017
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Masaya Tanaka, Noritsugu Umehara, Kouki Nemoto, Kiichi Okuno and Kota Konishi
- Journal Title
  
  Proceedings of 7th International Conference on Mechanics and Materials in Design
  
  Volume: 1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14577
[Journal Article] Clarification of high wear resistance mechanism of ta-CNx coating in poly alpha-olefin (PAO) lubrication2017
- Author(s)
  X. Liu, R. Yamaguchi, N. Umehara, H.Kousaka, M.Murashima
- Journal Title
  
  Tribology International
  
  Volume: 105 Pages: 193-200
- DOI
  10.1016/j.triboint.2016.10.016
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25220902
[Journal Article] Wear Reduction by Increase of Contact Area with Inner Structure Made by 3D Printer2017
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Masaya Tanaka, Noritsugu Umehara, Kouki Nemoto, Kouta Konishi and Kiichi Okuno
- Journal Title
  
  Proceedings of The 7th International Conference on Manufacturing, Machine Design and Tribology
  
  Volume: 1
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14577
[Journal Article] Effect of oil temperature and counterpart material on the wear mechanism of ta-CNx coating under base oil lubrication2017
- Author(s)
  X. Liu, R. Yamaguchi, N. Umehara, M. Murashima, T. Tokoroyama
- Journal Title
  
  Wear
  
  Volume: 390-391 Pages: 312-321
- DOI
  10.1016/j.wear.2017.08.012
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25220902
[Patent] 表面形状可変構造2017
- Inventor(s)
  村島基之，梅原徳次，吉野笙太
- Industrial Property Rights Holder
  村島基之，梅原徳次，吉野笙太
- Industrial Property Rights Type
  特許
- Patent Publication Number
  2017-104600
- Filing Date
  2017
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] Development of in situ surface treatment method using dielectric barrier discharge2023
- Author(s)
  Wenjun Wu, Noritsugu Umehara, Takayuki Tokoroyama, Motoyuki Murashima
- Organizer
  The 9th International Conference on Manufacturing, Machine Design and Tribology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K18751
[Presentation] Study of potential of mean force for carbon-additive bonding with different number of chemical bonds on Diamond-like carbon surfaces2023
- Author(s)
  Koshiro Torimoto, Hirotoshi Akiyama, Ryuichi Okamoto, Motoyuki Murashima, Hitoshi Washizu
- Organizer
  3rd Korea-Tribology International Symposium
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22660
[Presentation] 摩擦の能動的制御とトライボロジーにおけるAI活用2023
- Author(s)
  村島基之
- Organizer
  第309回九州トライボロジー懇談会
- Invited
- Data Source
  KAKENHI-PROJECT-22K18751
[Presentation] DLC膜表面のsp2/sp3比の違いによる炭素と添加剤との結合の研究2023
- Author(s)
  鳥本航史朗，秋山博俊，岡本隆一，村島基之，鷲津仁志
- Organizer
  関西潤滑懇談会
- Data Source
  KAKENHI-PROJECT-23K22660
[Presentation] Study of Potential of Mean Force for Carbon-additive Bonding on Diamond-like Carbon Surfaces2023
- Author(s)
  Koshiro Torimoto, Hirotoshi Akiyama, Ryuichi Okamoto, Motoyuki Murashima, Hitoshi Washizu
- Organizer
  9th International Tribology Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22660
[Presentation] アミノ酸水溶液中における軸受鋼とダイヤモンドライクカーボンの摩擦特性2023
- Author(s)
  近藤凛太郎，足立幸志，村島基之
- Organizer
  日本機械学会東北支部第59期秋季講演会
- Data Source
  KAKENHI-PROJECT-22K18751
[Presentation] Control of Carbonaceous Structure of Diamond-like Carbon Coating for Promoting Additives-derived Tribofilm Formation under Oil Lubrication2023
- Author(s)
  Ryo Ogawa, Koshi Adachi, Motoyuki Murashima
- Organizer
  9th International Tribology Conference
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-23K22660
[Presentation] Fundamental Study to Form Superlow Frictional Interface of DLC Coating Lubricated with Lactic Acid under the Boundary Lubrication2023
- Author(s)
  Norito Kitamura, Koshi Adachi, Motoyuki Murashima
- Organizer
  9th International Tribology Conference
- Data Source
  KAKENHI-PROJECT-22K18751
[Presentation] sp2/sp3比の異なるDLC膜表面の炭素と添加剤の結合に関する物理化学的研究2023
- Author(s)
  鳥本航史朗，秋山博俊，岡本隆一，村島基之，鷲津仁志
- Organizer
  トライボロジー会議春2023，東京
- Data Source
  KAKENHI-PROJECT-23K22660
[Presentation] "ZnDTP 由来トライボフィルムの成長におけるDLC 構造の重要因子 -窒素含有DLC とAFM 摩擦試験を用いた実験-"2022
- Author(s)
  村島基之，山下祥輝，梅原徳次，野老山貴行，佐藤魁星，佐々木信也
- Organizer
  トライボロジー会議秋福井
- Data Source
  KAKENHI-PROJECT-23K22660
[Presentation] Development of low-friction lubrication technology using an AC electric field2021
- Author(s)
  Kazuma Aono, Motoyuki Murashima, Noritsugu Umehara, Takayuki Tokoroyama
- Organizer
  The 1st Carbon2 Tribology Forum
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K14639
[Presentation] 誘電泳動を用いたMoS2 の摩擦面導入による低摩擦技術の開発2021
- Author(s)
  青野和馬，村島基之，梅原徳次，野老山貴行，李義永
- Organizer
  トライボロジー会議秋2021，松江
- Data Source
  KAKENHI-PROJECT-20K14639
[Presentation] 交流電場を用いた高粘度油の局所保持による低摩擦潤滑技術の開発2021
- Author(s)
  青野和馬，堀川慎太郎，村瀬良，村島基之，梅原徳次，野老山貴行，李義永
- Organizer
  トライボロジー会議春2021，東京
- Data Source
  KAKENHI-PROJECT-20K14639
[Presentation] Basic study on low friction lubrication technology using dielectrophoresis2021
- Author(s)
  Kazuma Aono, Motoyuki Murashima, Noritsugu Umehara, Takayuki Tokoroyama
- Organizer
  2nd KIMS-NU DLC Tribology Symposium
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K14639
[Presentation] Development of a low friction method using dielectric migrated high-viscos oil droplet in low viscos lubricant2021
- Author(s)
  Kazuma Aono, Motoyuki Murashima, Noritsugu Umehara, Takayuki Tokoroyama
- Organizer
  Malaysian International Tribology Conference 2020
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K14639
[Presentation] ta-CNx膜のベース油中摩擦における潤滑油温度の摩擦係数, 油膜厚さ及び構造変化層の分極率に及ぼす影響2020
- Author(s)
  村瀬　良 , 梅原徳次, 野老山貴行, 村島基之, Lee Wooyoung
- Organizer
  日本機械学会年次大会
- Data Source
  KAKENHI-PROJECT-18H03751
[Presentation] 油潤滑下における高粘度微小油滴の誘電泳動による低摩擦潤滑技術の開発2020
- Author(s)
  青野和馬，村島基之，梅原徳次，野老山貴行
- Organizer
  日本機械学会年次大会2020 名古屋
- Data Source
  KAKENHI-PROJECT-20K14639
[Presentation] Effect of Multiple Damages on AI Learning to Realize Stable Friction with Active Morphing Surface -Smart Surface-2019
- Author(s)
  Motoyuki Murashima, Takazumi Yamada, Noritsugu Umehara, Takayuki Tokoroyama
- Organizer
  International Tribology Conference Sendai 2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] Active Control of Hydrodynamic Lubrication Condition by Morphing Surface Created by 3D Printer2019
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Noritsugu Umehara, Takayuki Tokoroyama
- Organizer
  Japan-Taiwan Tribology Symposium 2019,
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] Comparison of conventional plasma carburizing and new plasma carburizing using microwave-enhanced high-density plasma generated near substrate2018
- Author(s)
  Keiichirou NODA, Hiroyuki KOUSAKA, Noritsugu Umehara, Motoyuki Murashima, and Takayuki Tokoroyama
- Organizer
  10th International Symposium on Advanced Plasma Science (Isplasma2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04256
[Presentation] Plasma Enhanced Chemical Vapor Deposition of Carbon Film into an 100-um-Diameter Hole under the Assistance of Source Gas Blowing2018
- Author(s)
  Rihito Ota, Hiroyuki Kousaka, Laxminarayan L. Raja, Noritsugu Umehara, Takayuki Tokoroyama, and Motoyuki Murashima
- Organizer
  10th International Symposium on Advanced Plasma Science (Isplasma2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04256
[Presentation] Development of Morphing Surface made by Additive Manufacturing and Active Friction Control2018
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Noritsugu Umehara
- Organizer
  2nd Korea-Japan Tribology Symposium
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] Plasma Enhanced Chemical Vapor Deposition of Carbon Film into a Small Hole 100 μm in Diameter with MVP and Source Gas Blowing (BP35)2018
- Author(s)
  R. Ota, H. Kousaka, L.L. Raja, N. Umehara, M. Murashima, T. Tokoroyama
- Organizer
  45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04256
[Presentation] Multiple Friction Control using Morphing Surface -Smart Surface-2018
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Noritsugu Umehara
- Organizer
  Taiwan-Japan Tribology Symposium 2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] The effect of inner structures created by 3D-additive manufacturing on wear reduction of 3D printed material2017
- Author(s)
  Motoyuki Murashima
- Organizer
  SAKURA Symposium on Mechanical Science and Engineering 2017
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] 3Dプリンタを用いた変形表面の創製と能動的摩擦制御手法の開発-スマートサーフェスへの挑戦-2017
- Author(s)
  村島基之，吉野笙太，梅原徳次
- Organizer
  トライボロジー会議秋高松
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] Wear Reduction by Increase of Contact Area with Inner Structure Made by 3D Printer2017
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Masaya Tanaka, Noritsugu Umehara, Kouki Nemoto, Kouta Konishi and Kiichi Okuno
- Organizer
  The 7th International Conference on Manufacturing, Machine Design and Tribology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] WEAR REDUCTION WITH INNER STRUCTURE MADE BY 3D PRINTER2017
- Author(s)
  Motoyuki Murashima, Masato Kawaguchi, Masaya Tanaka, Noritsugu Umehara, Kouki Nemoto, Kiichi Okuno and Kota Konishi
- Organizer
  7th International Conference on Mechanics and Materials in Design
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14577
[Presentation] Wear behavior of tetrahedral amorphous carbon nitride under poly alpha-olefin (PAO) lubrication2017
- Author(s)
  X. Liu, R. Yamaguchi, N. Umehara, M. Murashima
- Organizer
  International Conference on Manufacturing, Machine Design and Tribology, ICMDT2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25220902
[Presentation] Wear behavior of tetrahedral amorphous carbon nitride sliding against steel and sapphire disks under PAO oil lubrication2017
- Author(s)
  X. Liu, N. Umehara, T. Tokoroyama, M. Murashima
- Organizer
  World Tribology Congress 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25220902
[Presentation] Effect of source gas flux from the nozzle on the thickness distribution of DLC in microwave-assisted ultra-high speed coating with gas blowing2016
- Author(s)
  Hiroto Izuoka, Hiroyuki Kousaka, Noritsugu Umehara, and Motoyuki Murashima
- Organizer
  15th International Conference on Plasma Surface Engineering
- Place of Presentation
  Garmisch-Partenkirchen, Germany
- Year and Date
  2016-09-11
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04256
[Presentation] ガス吹付型・超高速DLC成膜の実用化指針の提案2016
- Author(s)
  出岡寛人、上坂裕之、梅原徳次、村島基之
- Organizer
  トライボロジー会議2016秋新潟
- Place of Presentation
  朱鷺メッセ、新潟
- Year and Date
  2016-10-13
- Data Source
  KAKENHI-PROJECT-16H04256

1. Umehara Noritsugu (70203586)

# of Collaborated Projects: 3 results

# of Collaborated Products: 11 results
2. Kousaka Hiroyuki (90362318)

# of Collaborated Projects: 2 results

# of Collaborated Products: 7 results
3. 野老山貴行 (20432247)

# of Collaborated Projects: 2 results

# of Collaborated Products: 5 results
4. 川口雅弘 (40463054)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
5. 鷲津仁志 (00394883)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
6. 太田貴之 (10379612)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
7. 小田昭紀 (70335090)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
8. 後藤実 (00435455)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 月山陽介 (00533639)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 吉野雅彦 (40201032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. 徳田祐樹 (30633515)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. 久保百司 (90241538)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Murashima Motoyuki 村島 基之

Research Projects

Research Products

Co-Researchers

Lubricant-less super-environmental adaptive engineering brought by in-situ generation of lubricats on friction surfacesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

摩擦生成ナノ界面トライボ被膜の分析と高機能トライボ被膜の為のDLC炭素構造の解明Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of lubricant additives delivery system with microdroplet using AC electric fieldPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of design proposal for ultla low friction by controlling of permittivity of nano transformed layer and adsorbed lubricants on carbonaceous hard coating

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Invention of active morphing smart surface created by additive manufacturingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Building an academic foundation for balancing ultra-high-speed deposition and ultra-low friction of hard carbon-based coatings

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Smart Tribosystem with Friction Induced Transformed Thin Layers

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Realization of near-less friction of ta-CNx coating under R32 refrigerant environment2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] New in situ superlow-friction method for nitrogen-containing diamond-like carbon coatings using dielectric barrier discharge treatment in ambient air2022

Author(s)

Journal Title

DOI

Data Source

[Journal Article] In situ observation of the formation of MoDTC-derived tribofilm on a ta-C coating using reflectance spectroscopy and its effects on friction2021

Author(s)

Journal Title

DOI

NAID

Data Source

[Journal Article] Active Control of Hydrodynamic Lubrication Condition by Morphing Surface Created by 3D Printer2019

Author(s)

Journal Title

Data Source

[Journal Article] ベース油中CNxの摩擦界面その場反射分光分析による 摩擦メカニズムの解明2019

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Effect of Multiple Damages on AI Learning to Realize Stable Friction with Active Morphing Surface -Smart Surface-2019

Author(s)

Journal Title

Data Source

[Journal Article] Intelligent tribological surfaces: from concept to realization using additive manufacturing2019

Author(s)

Journal Title

Data Source

[Journal Article] Clarification of effect of transformed layer and oil film on low friction coefficient of CNx coating in PAO oil lubrication by in-situ observation of friction area with reflectance spectroscopy2017

Murashima Motoyuki 村島基之

[Journal Article] ベース油中CNxの摩擦界面その場反射分光分析による摩擦メカニズムの解明2019