Matsubara Atsushi 松原厚

… Alternative Names

MATSUBARA Atsushi 松原厚

松原厚マツバラアツシ

Less

Researcher Number	80243054
Other IDs
External Links
Affiliation (Current)	2025: 京都大学, 工学研究科, 教授
Affiliation (based on the past Project Information) *help	2017 – 2019: 京都大学, 工学研究科, 教授 2014 – 2015: 京都大学, 工学(系)研究科(研究院), 教授 2011: 京都大学, 大学院・工学研究科, 教授 2009 – 2010: Kyoto University, 工学研究科, 教授 2006 – 2007: 京都大学, 工学研究科, 教授 … More 2004: Kyoto University, Department of Micro Engineering, Professor, 工学研究科, 教授 1999 – 2004: Kyoto Univ., Graduate School of Eng., Associate Professor, 工学研究科, 助教授 1999: 京都大学, 大学院・工学研究科, 助教授 1995 – 1998: Kyoto University, Graduate School of Engineering, Research Associate, 工学研究科, 助手 1994: 京都大学, 工学部, 助手 1992: 京都大学, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 / Design science Except Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / 機械工作
Keywords	Principal Investigator 工作機械 / サーボ系 / 切削加工 / 送り系 / NC工作機械 / Vibration / CNC Machine Tools / Servo System / 送り駆動系 / CNC工作機械 … More / 切削抵抗 / 動剛性 / 切削工学 / 切削力 / 実時間シミュレーション / 加振装置 / エンドミル / 分岐現象 / 動特性 / びびり振動 / 加振 / 振動モード / 制御 / 自励振動 / 切削 / Feed drive / Machining / Profile measurement / Flatness / NC machine tools / 高精密加工 / 機械計測 / マイクロ加工 / 精密計測 / 平面度 / Thermal displacement / Servo system / IIR filter / Feed Drive Systems / Dynamic model / Base vibration / NC Machine Tools / ゲインチューニング / FEM / 熱変位 / IIRフィルタ / 振動解析 / 力学モデル / ベース振動 / Ball Screw Drive / Guide / Vibration Control / Linear Motor / 非線形制御 / 油圧ブレーキ / ボールねじ送り系 / ガイド / 減衰制御 / リニアモータ / 振動 / Adaptire Control / Machining Model / Cutting Force / エンドミル加工 / 適応制御 / 加工モデル / 組立 / 生産システム / 除振・制振 / マイクロ・ナノ加工 / 振動制御 … More Except Principal Investigator 工作機械 / リニアモータ / 送り駆動系 / サーボ系 / 高能率加工 / 高速加工 / feed drive system / 高速・高能率加工 / ハイリードボールねじ / 複合工作機械 / 工程集約 / 変種変量生産 / Positioning error / Circular tests / Kinematic parameter / Calibration / Parallel kinematic machine tool / 位置決め誤差 / 円弧運動試験 / 機構パラメータ / キャリブレーション / パラレル機構工作機械 / linear guideway / CNC machine tools / Pneumatic control system / Damping control / Servo control system / 直道ガイド / 直動ガイド / CNC工作機械 / 油圧制御系 / 振動減衰 / Serro System / Vibration / Damping Control / High Speed Machining / Feed Drives / Machine Tools / Linear Motor / 高速・高精度 / リニアモーター / 振動 / 減衰制御 / リニアモーターカー / high speed high acceleration machining / high lead ball screw / multi-function machine tools / integrated process / agile manufacturing system / 工具寿命 / 残留振動 / high acceleration rate / high speed feed / machine tools / linear motor / サーボ特性 / 高加速度 / 高速送り / 送り駆除系 / high speed, high productive machining / ball screw with high lead / multi-functional machine tools / process concentration / agile manufacturing / 送り系 / 主軸系 / 高速・高能率生産 / 加工条件データベース / 工具管理 / オンザマシン計測 / 加工精度 / 修正加工 Less

Analysis of self-excited chatter with mode coupling using real-time simulation of cutting processPrincipal Investigator
- Principal Investigator
  
  Matsubara Atsushi
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Analysis and design of the manufacturing field of production machines using the comparison of virtual and real dataPrincipal Investigator
- Principal Investigator
  
  Matsubara Atsushi
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Design science
- Research Institution
  Kyoto University
Design method to control ground vibration and direct vibrations for micro-nano machine toolsPrincipal Investigator
- Principal Investigator
  
  MATSUBARA Atsushi
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Research on the high-precision machine tools integrated with a measurement artifact and control modelPrincipal Investigator
- Principal Investigator
  
  MATSUBARA Atsushi
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Kinematic Calibration of a Parallel Mechanism Machine Tool
- Principal Investigator
  
  IBARAKI Soichi, 垣野義昭
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kyoto University
Enhancement of the fitness for high speed and high precision machining centerPrincipal Investigator
- Principal Investigator
  
  MATSUBARA Atsushi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  KYOTO UNIVERSITY
High Speed and High Precision Feed Drive of NC Machine Tools by Dual ActuationPrincipal Investigator
- Principal Investigator
  
  MATSUBARA Atsushi
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
Intelligent Guideways to Improve Servo Control Performance of NC Machine Tools
- Principal Investigator
  
  KAKINO Yoshiaki
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
A Research on the Analysis and Design of CNC Servo System Considering the Machining ProcessPrincipal Investigator
- Principal Investigator
  
  MATSUBARA Atsushi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
A Study on High Speed and High Accurate Machining by Using Linear Motor Applied Machine Tools
- Principal Investigator
  
  KAKINO Yoshiaki
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
Study on high speed, high productive machining by machine tools developed for the agile manufacturing system
- Principal Investigator
  
  KAKINO Yoshiaki
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
R&D of the machine tools with the linear motors
- Principal Investigator
  
  KAKINO Yoshiaki
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
A Study on Multi-functional Machine Tools for Agile Manufacturing
- Principal Investigator
  
  KAKINO Yoshiaki
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KYOTO UNIVERSITY
除去加工用修正加工システムの知能化・高度化に関する研究
- Principal Investigator
  
  KAKINO Yoshiaki
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kyoto University

All 2020 2019 2018 2017 2015 2014 2012 2011 2009 2007 2006 2004 2003

All Journal Article Presentation Patent

[Journal Article] Influence of contact condition between flexible plate and passive pivot support on machining vibration2018
- Author(s)
  Atsushi Matsubara, Hiroaki Nagai, Nils Knorr, Daisuke Kono
- Journal Title
  
  Procedia CIRP
  
  Volume: 77 Pages: 557-560
- DOI
  10.1016/j.procir.2018.08.225
- NAID
  120006726171
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03157
[Journal Article] Vibration Suppression Mechanism of a Passive Pivot Support in Thin-Wall Milling2018
- Author(s)
  Hiroaki NAGAI, Nils KNORR, Iwao YAMAJI, Atsushi MATSUBARA
- Journal Title
  
  Prof. of 17th International Conference on Precision Engineering.
  
  Volume: 11
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03157
[Journal Article] Design and formation of workforce skills for machine tool assembly2015
- Author(s)
  Masahiko Mori, Keiichi Ota, Atsushi Matsubara, Hajime Mizuyama
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 64 Issue: 1 Pages: 459-462
- DOI
  10.1016/j.cirp.2015.04.113
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26560008
[Journal Article] Analysis of Response Mechanism at Machine Tool Assembly Site2014
- Author(s)
  太田圭一，松原厚，水山元
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 80 Issue: 9 Pages: 856-861
- DOI
  10.2493/jjspe.80.856
- NAID
  130004688072
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-26560008
[Journal Article] Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools2012
- Author(s)
  D. Kono, A. Matsubara, K. Nagaoka, K. Yamazaki
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.36 Pages: 477-484
- Data Source
  KAKENHI-PROJECT-21560121
[Journal Article]2011
- Author(s)
  河野大輔, 松原厚, 岡田琢巳, 廣岡孝彦;安田安志
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: vol.77, no.775 Pages: 1078-1085
- Data Source
  KAKENHI-PROJECT-21560121
[Journal Article] パッシブ除振台上に設置した高精密加工機の振動解析2011
- Author(s)
  河野大輔, 松原厚, 岡田琢巳, 廣岡孝彦, 安田正志
- Journal Title
  
  日本機械学会論文集C編
  
  Volume: 77 Pages: 1078-1085
- NAID
  130004659350
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560121
[Journal Article] 運動誤差の計測と補正による高精密加工に関する研究2007
- Author(s)
  河野大輔, 松原厚, 渡辺靖巳
- Journal Title
  
  2007年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 123-124
- NAID
  130005028342
- Data Source
  KAKENHI-PROJECT-18560103
[Journal Article] Development and Evaluation of a High-Precision Machining Center with Friction-Less Drives2006
- Author(s)
  Daisuke Kono, Atsushi Matsubara, Soichi Ibaraki, Hisao Otsubo, Masarun Tsuboi, Isao Oshita
- Journal Title
  
  Proc. of 11th International Conference on Precision Engineering (ICPE)
  
  Pages: 163-167
- Data Source
  KAKENHI-PROJECT-18560103
[Journal Article] Vibration Control of Feed Drive Systems by Nonlinear Relative Velocity Feedback2004
- Author(s)
  Kangkyu Lee, Atsushi Matsubara, Soichi Ibaraki, Yoshiaki Kakino
- Journal Title
  
  Proceedings of ICPT2004
  
  Pages: 214-215
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] ベース振動の影響を受けるNC工作機械送り系(第1報) -ベース振動を考慮した送り系のモデリングとサーボ解析-2004
- Author(s)
  松原厚, 梅本雅資, 濱村実, 藤田順, 甲斐義章, 垣野義昭
- Journal Title
  
  精密工学会誌 70・4
  
  Pages: 89-93
- NAID
  130005026514
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] Feed Drives of NC Machine Tools Influenced by Base Vibration (2nd Report)-Auti-vbration design for positioning-2004
- Author(s)
  Atsushi MATSUBARA, Soichi IBARAKI, Minoru HAMAMURA, Jun FUJITA, Yoshiaki KAI, Masashi UMEMOTO
- Journal Title
  
  Proc.of the annual meeting of the Japan Society for Precision Engineering
  
  Pages: 341-342
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] ベース振動の影響を受けるNC工作機械送り系(第2報)-位置決め時の残留振動の抑制方法-2004
- Author(s)
  松原厚, 茨木創一, 濱村実, 藤田順, 甲斐義章, 梅本雅資
- Journal Title
  
  2004年精密工学会秋季大会学術講演会講演論文集
  
  Pages: 341-342
- NAID
  130004655507
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] Vibration Control of Feed Drive Systems by Nonlinear Relative Velocity Feedback2004
- Author(s)
  Kangkyu Lee, Atsushi MATSUBARA, Soichi IBARAKI, Yoshiaki KAKINO
- Journal Title
  
  Proceedings of ICPT2004
  
  Pages: 214-215
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] ベース振動の影響を受けるNC工作機械送り系(第1報)-ベース振動を考慮した送り系のモデリングとサーボ解析-2004
- Author(s)
  松原厚, 梅本雅資, 濱村実, 藤田順, 甲斐義章, 垣野義昭
- Journal Title
  
  精密工学会誌 70・4
  
  Pages: 89-93
- NAID
  130005026514
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] Feed Drives of NC Machine Tools Influenced by Base Vibration (1st Report)-Modeling and Servo Analysis of Feed Drives with Base Dynamics-2004
- Author(s)
  Atsushi MATSUBARA, Masashi UMEMOTO, Minoru HAMAMURA, Jun FUJITA, Yoshiaki KAI, Yoshiaki KAKINO
- Journal Title
  
  Journal of the Japan Society for Precision Engineering 70/4
  
  Pages: 89-93
- NAID
  130005026514
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] Feed Drives of NC Machine Tools Influenced by Base Vibration (1st Report)-Modeling and Servo Analysis of Feed Drives with Base Dynamics -2003
- Author(s)
  Atsushi MATSUBARA, Yoshiaki KAKINO, Minoru HAMAMURA, Jun FUJITA, Yoshiaki KAI
- Journal Title
  
  Proc.of the annual meeting of the Japan Society for Precision Engineering
  
  Pages: 159-159
- NAID
  130005026514
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Journal Article] ベース振動の影響を受けるNC工作機械送り系(第1報)-ベース振動を考慮した送り系のモデリングとサーボ解析-2003
- Author(s)
  松原厚, 茨木創一, 濱村実, 藤田順, 甲斐義章
- Journal Title
  
  2003年精密工学会秋季大会学術講演会講演論文集
  
  Pages: 159-159
- NAID
  130005026514
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560095
[Patent] パラレルメカニズム型工作機械の切削抵抗推定方法2004
- Inventor(s)
  垣野義昭, 松原厚, 茨木創一, 奥田敏宏, 中川昌夫
- Industrial Property Rights Holder
  垣野義昭, 松原厚, 茨木創一, 奥田敏宏, 中川昌夫
- Industrial Property Number
  2004-186980
- Filing Date
  2004-06-24
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560094
[Presentation] Excitation test with cutting force pattern2020
- Author(s)
  Atsushi Matsubara
- Organizer
  CIRP Winter meeting
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 非接触荷重発生装置による工作機械主軸評価のための加振波形の研究2019
- Author(s)
  岸野遼馬, 松原厚, 山路伊和夫
- Organizer
  日本機械学会第 13 回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 相図を用いた切削加工振動の解析2019
- Author(s)
  松原厚,高田希恵,河野大輔
- Organizer
  日本機械学会第 13 回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 非接触荷重発生装置による工作機械主軸回転時の振動の調査2019
- Author(s)
  岸野遼馬, 松原厚，山路伊和夫
- Organizer
  日本機械学会関西支部第 94 期定時総会講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 薄肉部品の切削加工における振動の安定性の解析2019
- Author(s)
  高田希恵,梅津拓真,河野大輔,松原厚
- Organizer
  2019 年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 2軸方向非接触荷重発生装置による工作機械主軸系動剛性の測定2018
- Author(s)
  岸野遼馬, 松原厚, 山路伊和夫
- Organizer
  日本機械学会生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 主軸動剛性の評価を目的とした非接触式2軸荷重発生装置の開発2017
- Author(s)
  後藤俊輔松原厚山路伊和夫石井眞二
- Organizer
  2017年度精密工学会関西地方定期学術講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] Development of a Contactless Biaxial Magnetic Loader for Evaluation of Spindle Dynamics2017
- Author(s)
  Shunsuke GOTO Atsushi MATSUBARA Iwao YAMAJI Shinji ISHII
- Organizer
  Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] 薄肉部品の切削加工における振動抑制に関する研究（第一報）治具の振動抑制効果2017
- Author(s)
  長井大顕松原厚梅津拓真
- Organizer
  2017年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-17H03157
[Presentation] Analysis on Dynamic Machine Tool Assembly2014
- Author(s)
  K. Ota, A. Matsubara, H. Mizuyama
- Organizer
  International Symposium on Flexible Automation
- Place of Presentation
  Awaji-Island, Hyogo, Japan
- Year and Date
  2014-07-14
- Data Source
  KAKENHI-PROJECT-26560008
[Presentation] 工作機械の支持剛性の推定に関する研究2012
- Author(s)
  河野大輔, 稲垣孝洋, 松原厚, 山路伊和夫
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 工作機械の支持剛性の推定に関する研究2012
- Author(s)
  河野大輔, 稲垣孝洋, 松原厚, 山路伊和夫
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  東京
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 接触剛性が工作機械の支持剛性に与える影響に関する研究2011
- Author(s)
  稲垣孝洋, 松原厚, 河野大輔
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 剛体マルチボディモデルを用いた高精密加工機の振動評価2011
- Author(s)
  河野大輔, 松原厚
- Organizer
  2011年度精密工学会秋季大会学術講演会
- Place of Presentation
  金沢
- Year and Date
  2011-09-20
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 工作機械のロッキング振動の解析2011
- Author(s)
  稲垣孝洋, 松原厚, 河野大輔
- Organizer
  精密工学会2011年度関西地方定期学術講演会
- Year and Date
  2011-06-30
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] パッシブ除振台上に設置した高精密加工機の振動解析2009
- Author(s)
  廣岡孝彦, 松原厚, 河野大輔, 安田正志, 岡田琢巳
- Organizer
  2009年度精密工学会秋季大会学術講演会
- Place of Presentation
  神戸大学
- Year and Date
  2009-09-12
- Data Source
  KAKENHI-PROJECT-21560121
[Presentation] 運動誤差の計測と補正による高精密加工に関する研究2007
- Author(s)
  河野大輔, 松原厚
- Organizer
  日本機械学会2007年度年次大会
- Place of Presentation
  大阪
- Year and Date
  2007-09-10
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560103
[Presentation] High-precision machining by measurement and compensation of motion error(in Japanese)2007
- Author(s)
  Daisuke, Kono, Atsushi, Matsubara
- Organizer
  Mechanical Engineering Congress, 2007 Japan
- Place of Presentation
  Osaka, Japan
- Year and Date
  2007-09-10
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560103
[Presentation] High-precision machining by measurement and compensation of motion error2007
- Author(s)
  Daisuke Kono, Atsushi Matsubara, Iwao Yamaji, Tomoya Fujita
- Organizer
  14th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  福岡
- Year and Date
  2007-11-09
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560103
[Presentation] High-precision machining by measurement and compensation of motion error2007
- Author(s)
  Daisuke Kono, Atsushi Matsubara, Iwao Yamaji, Tomoya Fujita
- Organizer
  14th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  福岡
- Year and Date
  2007-11-09
- Data Source
  KAKENHI-PROJECT-18560103
[Presentation] High-precision machining by measurement and compensation of motion error2007
- Author(s)
  Daisuke, Kono, Atsushi, Matsubara, Iwao, Yamaji, Tomoya, Fujita
- Organizer
  14th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Fukuoka, Japan
- Year and Date
  2007-11-09
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560103
[Presentation] Development and Evaluation of a High-Precision Machining Center with Friction-Less Drives2006
- Author(s)
  Daisuke Kono, Atsushi Matsubara, Soichi Ibaraki, Hisao Otsubo, Masarun Tsuboi, Isao Oshita
- Organizer
  Proc. of 11th International Conference on Precision Engineering(ICPE)
- Place of Presentation
  東京
- Year and Date
  2006-08-16
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18560103
[Presentation] Development and Evaluation of a High-Precision Machining Center with Friction-Less Drives2006
- Author(s)
  Daisuke, Kono, Atsushi, Matsubara, Soiehi, Ibaraki, Hisao, Otsubo, Masarun, Tsuboi, Isao, Oshita
- Organizer
  Proc. of 11th International Conference on Precision Engineering (ICPE)
- Place of Presentation
  Tokyo, Japan
- Year and Date
  2006-08-16
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18560103

1. KAKINO Yoshiaki (00026204)

# of Collaborated Projects: 9 results

# of Collaborated Products: 0 results
2. TAKESHITA Torao

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
3. IHARA Yukitoshi (90213199)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
4. IBARAKI Soichi (80335190)

# of Collaborated Projects: 5 results

# of Collaborated Products: 8 results
5. KONO Daisuke (80576504)

# of Collaborated Projects: 2 results

# of Collaborated Products: 12 results
6. FUJIWARA Akihiko

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. KARITA Atsuji

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. Mizuyama Hajime (40252473)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
9. NAKAGAWA Heizaburou (50033345)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. KOMORI Masaharu (90335191)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. Ota Keiichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
12. Mori Masahiko

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
13. KARITA Mitsuji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. NAKAMURA Shinya

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. NAKAGAWA Masao

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. SUZUKI Yasuhiko

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Matsubara Atsushi 松原 厚

MATSUBARA Atsushi 松原 厚

松原 厚 マツバラ アツシ

Research Projects

Research Products

Co-Researchers

Analysis of self-excited chatter with mode coupling using real-time simulation of cutting processPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Analysis and design of the manufacturing field of production machines using the comparison of virtual and real dataPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Design method to control ground vibration and direct vibrations for micro-nano machine toolsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on the high-precision machine tools integrated with a measurement artifact and control modelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Kinematic Calibration of a Parallel Mechanism Machine Tool

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Enhancement of the fitness for high speed and high precision machining centerPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

High Speed and High Precision Feed Drive of NC Machine Tools by Dual ActuationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Intelligent Guideways to Improve Servo Control Performance of NC Machine Tools

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Research on the Analysis and Design of CNC Servo System Considering the Machining ProcessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on High Speed and High Accurate Machining by Using Linear Motor Applied Machine Tools

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on high speed, high productive machining by machine tools developed for the agile manufacturing system

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

R&D of the machine tools with the linear motors

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

A Study on Multi-functional Machine Tools for Agile Manufacturing

Principal Investigator

Matsubara Atsushi 松原厚

MATSUBARA Atsushi 松原厚

松原厚マツバラアツシ