Yoshida Makoto 吉田誠

… Alternative Names

吉田誠ヨシダマコト

MAKOTO Yoshida 吉田誠

YOSHIDA Makoto 吉田誠

Less

Researcher Number	80277847
Other IDs
External Links
Affiliation (Current)	2025: 早稲田大学, 理工学術院, 教授
Affiliation (based on the past Project Information) *help	2016: 早稲田大学, 理工学術院, 教授 2008: 早稲田大学, 理工学術院, 准教授 2001 – 2002: 広島大学, 大学院・工学研究科, 助手 1997 – 2000: 広島大学, 工学部, 助手
Review Section/Research Field	Principal Investigator Metal making engineering / Thermal engineering Except Principal Investigator Composite materials/Physical properties / Composite materials/Physical properties
Keywords	Principal Investigator 協調成長 / 重力 / 比重差 / 共晶 / 凝固 / solidification / SiC / eutectic / ３Dプリンター / 燃料電池 … More / 分散剤 / サテライト / 高濃度 / インクジェット / 溶媒 / 粘性係数 / 高分散 / Fiber / CMC / acoustic emission (AE) / Ceramics / residual stress / Composite / AE / 残留応力 / 繊維 / 炭化珪素 / 酸化物 / セラミックス / 複合材料 / gravity / monotectic / Al203 / YAG / Al_2O_3 / composite … More Except Principal Investigator Structural material / Mechanical property / Interface / Deformation / Fracture / SEM / TEM / Metal matrix composite / 複合材料 / セラミックス / アルミニウム合金 / 金属複合材料 / コンポキャスト法 / マグネシウム合金 / 構造材料 / 機械的性質 / 界面 / 変形 / 破壊 / 走査型電子顕微鏡 / 透過電子顕微鏡 / 金属基複合材料 / 非破壊検査 / 分散強化 / 粉末や金 / CNT成長した金属粉末 / 金属被覆CNF / 熱伝導特性 / 機械的特性 / 反応焼結 / 接触角 / 界面活性剤 / カーボンナノファイバー(CNF) Less

Fabrication of TPB microstructure of SOFC by using 3D printersPrincipal Investigator
- Principal Investigator
  
  Yoshida Makoto
- Project Period (FY)
  2016
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Thermal engineering
- Research Institution
  Waseda University
Fabrication of carbon fibers reinforced aluminum matrix composites and its analysis of interfacial microphases.
- Principal Investigator
  
  MASUDA Chitoshi
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Composite materials/Physical properties
- Research Institution
  Waseda University
晶出相間に比重差を有する多相凝固のカップルドグロースに及ぼす重力の影響Principal Investigator
- Principal Investigator
  
  吉田誠
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Metal making engineering
- Research Institution
  Hiroshima University
Research and Development of SiC fiber reinforced/ oxide matrix composites for heisht efficiency non-cooling bledes in gas turbine generatorPrincipal Investigator
- Principal Investigator
  
  YOSHIDA Makoto
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Metal making engineering
- Research Institution
  HIROSHIMA UNIVERSITY
一方向凝固偏晶・共晶合金の協調成長および偏析挙動に及ぼす重力の影響Principal Investigator
- Principal Investigator
  
  吉田誠
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Metal making engineering
- Research Institution
  Hiroshima University
一方向凝固法によるAl_2O_3-Y_2O_3系共晶酸化物/炭化物系強化繊維の複合化Principal Investigator
- Principal Investigator
  
  吉田誠
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Metal making engineering
- Research Institution
  Hiroshima University
Microscopic analysis of deformation and fracture of metal matrix composites
- Principal Investigator
  
  SASAKI Gen
- Project Period (FY)
  1997 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Composite materials/Physical properties
- Research Institution
  Hiroshima University

All 2008 2007 2006 Other

All Journal Article Presentation Patent

[Journal Article] Al18B4O33ウイスカおよび炭素繊維・アルミニュウム、マグネシュウムの界面反応と機械的性質2008
- Author(s)
  浅井、魚住、小林、中西、佐藤、増田、吉田
- Journal Title
  
  鋳造工学 80巻
  
  Pages: 605-612
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560668
[Journal Article] Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting2008
- Author(s)
  H. Uozumi, K. kobayashi, C. Masuda, M. yoshida
- Journal Title
  
  Mat. Sci. Eng. vol 495
  
  Pages: 282-287
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560668
[Journal Article] Al19B4033ウイスカ強化および炭素繊維・アルミニユウム、マグネシユウムの界面反応と機械的性質2008
- Author(s)
  浅井, 魚住, 小林, 中西, 伊藤, 増田, 吉田
- Journal Title
  
  鋳造工学 80
  
  Pages: 605-612
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560668
[Journal Article] Fabrication process of carbon- nanoceous fiber reinforced aluminum and/or magnesium alloys composites by squeeze casting2007
- Author(s)
  H. Uozumi, K. kobayashi, C. Masuda, M. yoshida
- Journal Title
  
  Advanced Materials Research vol 15-17
  
  Pages: 209-214
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560668
[Journal Article] Wettability of carbon fiber, carbon nanotube and aluminum borate whisker hybrid perform by molten magnesium
- Author(s)
  H. Uozumi, K. kbayashi, K.Sinozuka, T.Tsukada, C. Masuda, M. yoshida
- Journal Title
  
  Met. & Mat. Trans. accepted
  
  Pages: 0-0
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560668
[Patent] 金属基炭素繊維複合材及びその製造方法2007
- Inventor(s)
  坂元、馬久地、久野、塚田、吉田、増田、魚住
- Industrial Property Rights Holder
  坂元、馬久地、久野、塚田、吉田、増田、魚住
- Filing Date
  2007-04-18
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] 炭素繊維強化Mg複合材の線膨脹係数2008
- Author(s)
  魚住、浅井、伊藤、増田、吉田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] Fabrication process of high volume fraction MWCNT/Al,Mg2008
- Author(s)
  H.Uozumi, K. Kobayashi, K. Shinozuka, T. tsukada, C. Masuda, M. yoshida
- Organizer
  Proc. 13^<th>ECCM
- Place of Presentation
  Sweden
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] MTCNT強化Al, Mg合金基複合材料の熱伝導特性に関する研究2007
- Author(s)
  中西、魚住、小林、増田、吉田、坂元、馬久、久野、塚田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] 金属繊維強化Mg合金基複合材料の作成と機械的特性2007
- Author(s)
  魚住、小林、中西、浅井、増田、白石、吉田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] MWCNT/Al複合材料の界面反応2007
- Author(s)
  浅井、魚住、小林、中西、増田、吉田、坂元、馬久、久野、塚田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] Compressive deformation of MWCNT porous perform during infiltration of molten Al or Mg alloys2007
- Author(s)
  H.Uozumi, K. Kobayashi, T. Matsunaga, K. Shinozuka,H. Sakamoto, T. tsukada, C. Masuda, M. yoshida
- Organizer
  Proc. Of 16^<th>ICCM
- Place of Presentation
  Japan
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] Wettability of carbon fiber and aluminum borate whisker hybrid perform by molten Mg2007
- Author(s)
  H.Uozumi, K. Kobayashi, K. Shinozuka, C. Masuda, M. yoshida
- Organizer
  Proc. Of Sampe Symp.& Exhibition
- Place of Presentation
  USA
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] 炭素繊維強化Al,Mg合金の界面反応と機械的性質2007
- Author(s)
  伊藤、魚住、浅井、増田、吉田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] MWCNT強化Al,mg合金基複合材料の作成プロセス2007
- Author(s)
  魚住、小林、中西、坂元、馬久、久野、塚田、増田、吉田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] 多層CNT多孔質体と溶融Mgとの濡れ性2006
- Author(s)
  小林、魚住、中西、増田、吉田、坂元、馬久、久野、塚田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] 高圧鋳造法による炭素繊維強化マグネシュウム合金基複合材料の作成プロセス2006
- Author(s)
  魚住、小林、中西、増田、吉田
- Organizer
  軽金属学会
- Data Source
  KAKENHI-PROJECT-18560668
[Presentation] 溶融Al、Mg合金含浸時における多層CNT多孔質体の圧縮変形に関する研究2006
- Author(s)
  小林、魚住、中西、増田、吉田、坂元、馬久、久野、塚田
- Organizer
  金属学会
- Data Source
  KAKENHI-PROJECT-18560668

1. SASAKI Gen (30192595)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
2. FUKUNAGA Hideharu (90034347)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. MASUDA Chitoshi (20350407)

# of Collaborated Projects: 1 results

# of Collaborated Products: 17 results
4. 中垣隆雄 (30454127)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 梅津信二郎 (70373032)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. OKANE Toshimitsu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 石川敏弘

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Yoshida Makoto 吉田 誠

吉田 誠 ヨシダ マコト

MAKOTO Yoshida 吉田 誠

YOSHIDA Makoto 吉田 誠

Research Projects

Research Products

Co-Researchers

Fabrication of TPB microstructure of SOFC by using 3D printersPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of carbon fibers reinforced aluminum matrix composites and its analysis of interfacial microphases.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

晶出相間に比重差を有する多相凝固のカップルドグロースに及ぼす重力の影響Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research and Development of SiC fiber reinforced/ oxide matrix composites for heisht efficiency non-cooling bledes in gas turbine generatorPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

一方向凝固偏晶・共晶合金の協調成長および偏析挙動に及ぼす重力の影響Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

一方向凝固法によるAl_2O_3-Y_2O_3系共晶酸化物/炭化物系強化繊維の複合化Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Microscopic analysis of deformation and fracture of metal matrix composites

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Al18B4O33ウイスカおよび炭素繊維・アルミニュウム、マグネシュウムの界面反応と機械的性質2008

Author(s)

Journal Title

Data Source

[Journal Article] Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting2008

Author(s)

Journal Title

Data Source

[Journal Article] Al19B4033ウイスカ強化および炭素繊維・アルミニユウム、マグネシユウムの界面反応と機械的性質2008

Author(s)

Journal Title

Data Source

[Journal Article] Fabrication process of carbon- nanoceous fiber reinforced aluminum and/or magnesium alloys composites by squeeze casting2007

Author(s)

Journal Title

Data Source

[Journal Article] Wettability of carbon fiber, carbon nanotube and aluminum borate whisker hybrid perform by molten magnesium

Author(s)

Journal Title

Data Source

[Patent] 金属基炭素繊維複合材及びその製造方法2007

Inventor(s)

Industrial Property Rights Holder

Filing Date

Data Source

[Presentation] 炭素繊維強化Mg複合材の線膨脹係数2008

Author(s)

Organizer

Data Source

[Presentation] Fabrication process of high volume fraction MWCNT/Al,Mg2008

Author(s)

Yoshida Makoto 吉田誠

吉田誠ヨシダマコト

MAKOTO Yoshida 吉田誠

YOSHIDA Makoto 吉田誠