Maeno Tomoyoshi 前野智美

… Alternative Names

Researcher Number	80505397
Other IDs
Affiliation (Current)	2019: 横浜国立大学, 大学院工学研究院, 准教授
Affiliation (based on the past Project Information) *help	2016 – 2019: 横浜国立大学, 大学院工学研究院, 准教授 2015: 横浜国立大学, 工学(系)研究科(研究院), 准教授 2013 – 2014: 豊橋技術科学大学, 工学(系)研究科(研究院), 助教 2010 – 2011: 豊橋技術科学大学, 大学院・工学研究科, 助手 2009: 豊橋技術科学大学, 工学部, 助手
Review Section/Research Field	Principal Investigator Basic Section 26050:Material processing and microstructure control-related / Material processing/treatments / Material processing/Microstructural control engineering / Production engineering/Processing studies Except Principal Investigator Material processing/treatments / Basic Section 26050:Material processing and microstructure control-related
Keywords	Principal Investigator 振動 / 再潤滑 / サーボプレス / 塑性加工 / 潤滑 / 高精度 / 焼付き / 板鍛造 / 自動再潤滑 / 焼付き防止 … More Except Principal Investigator 通電加熱 / 小穴抜き加工 / 局部通電加熱 / 冷却履歴部分制御 / 表面性状向上 / 急速加熱 / ホットスタンピング / 低加熱エネルギー / 冷却履歴 / テーラード / 電極材質 / 局部加熱 / せん断加工 / 切口面性状向上 / 高生産性 / 低加熱エネルギー荷重低減 / 高強度部と高延性 / 金型寿命向上 / ダイクエンチされた鋼板 / 超高張力鋼板 / 穴抜き加工 / 荷重低減 Less

Development of tailored hot stamping having high productivity using partial control of cooling historyOngoing
- Principal Investigator
  
  森謙一郎
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Toyohashi University of Technology
Development of hot stamping of age-hardened aluminium alloy sheet using contact heating without solution heat treatmentPrincipal InvestigatorOngoing
- Principal Investigator
  
  前野智美
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 26050:Material processing and microstructure control-related
- Research Institution
  Yokohama National University
Development of environmentally benign lubrication system using liquid lubricant with pulsating slide motion of servo pressPrincipal Investigator
- Principal Investigator
  
  Maeno Tomoyoshi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Yokohama National University
Consolidation by severe plastic deformation in compaction of magnetic powder cores and bonded magnetsPrincipal Investigator
- Principal Investigator
  
  MAENO Tomoyoshi
- Project Period (FY)
  2013 – 2014
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Toyohashi University of Technology
Investigation of mechanism of load pulsation, and applying for forming of parts having small thicknessPrincipal Investigator
- Principal Investigator
  
  MAENO Tomoyoshi
- Project Period (FY)
  2010 – 2011
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Development of shearing process of ultra-high strength steel sheets using local resistance heating
- Principal Investigator
  
  MORI Kenichiro
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology

All 2018 2017 2016 2015 2014 2012 2011 2010 Other

All Journal Article Presentation

[Journal Article] サーボプレスを活用した低サイクル振動モーションを用いた自動再潤滑2018
- Author(s)
  前野智美
- Journal Title
  
  プレス技術
  
  Volume: 56 Pages: 70-74
- Data Source
  KAKENHI-PROJECT-15K05720
[Journal Article] Use of liquid lubricant for backward extrusion of cup with internal splines using pulsating motion2017
- Author(s)
  T. Maeno, K. Mori, Y. Ichikawa, M. Sugawara
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 244 Pages: 273-281
- DOI
  10.1016/j.jmatprotec.2017.02.001
- Acknowledgement Compliant / Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15K05720
[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012
- Author(s)
  K.Mori, T.Maeno, Y.Maruo
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 61(印刷中)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012
- Author(s)
  K.Mori, T.Maeno, S.Fuzisaka
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 212 Pages: 534-540
- DOI
  10.1016/j.jmatprotec.2011.10.021
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012
- Author(s)
  K. Mori, T. Maeno, Y. Maruo
- Journal Title
  
  CIRP Annals. Manufacturing Technology
  
  Volume: 61-2
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012
- Author(s)
  K. Mori, T. Maeno, S. Fuzisaka
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 212-2 Pages: 534-540
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] ダイクエンチされた鋼板の局部通電加熱小穴抜き加工2011
- Author(s)
  森謙一郎, 丸尾佳広, 前野智美
- Journal Title
  
  塑性と加工
  
  Volume: 52 Pages: 1114-1118
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] Reduction of Friction in Compression of Plates by Load Pulsation2011
- Author(s)
  T. Maeno, K. Osakada, K. Mori
- Journal Title
  
  International Journal of Machine Tools & Manufacture
  
  Volume: 51-7-8 Pages: 612-617
- Data Source
  KAKENHI-PROJECT-22760555
[Journal Article] バイパス通電加熱を用いたプレス成形による強度分布を有する超高張力鋼成形品の製造2011
- Author(s)
  森謙一郎, Kittikul Mongkolkaji, 前野智美, 内田光隆, 上薗俊, 林貴文, 野田篤志
- Journal Title
  
  塑性と加工
  
  Volume: 52 Pages: 801-805
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] ダイクエンチされた鋼板の局部通電加熱を用いた温・熱間小穴抜き加工2010
- Author(s)
  前野智美, 丸尾佳広, 森謙一郎, 島田正美, 矢野洋
- Journal Title
  
  平成22年度塑性加工春季講演会講演論文集
  
  Pages: 115-116
- Data Source
  KAKENHI-PROJECT-21360360
[Journal Article] 超高張力鋼板の局部通電加熱穴抜き加工2010
- Author(s)
  森謙一郎, 藤阪靖二, 内田光隆, 上薗俊, 前野智美
- Journal Title
  
  塑性と加工 (日本塑性加工学会誌) 51巻
  
  Pages: 55-59
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] ステンレス厚鋼板の穴抜き加工における振動モーションを用いたせん断面品質向上2016
- Author(s)
  前野智美, 菅原稔, 森謙一郎
- Organizer
  平成28年度　塑性加工春期講演会
- Place of Presentation
  京都工芸繊維大学　松ヶ崎キャンパス
- Year and Date
  2016-05-20
- Data Source
  KAKENHI-PROJECT-15K05720
[Presentation] サーボプレスを用いた振動後方押出しによる内スプライン成形品の表面性状の向上2015
- Author(s)
  前野智美,菅原稔, 森謙一郎
- Organizer
  平成27年度　塑性加工春期講演会
- Place of Presentation
  慶應義塾大学　矢上キャンパス
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-15K05720
[Presentation] 摩擦援用および背圧付加押出しによるNd-Fe-B磁性粉末の高密度化2014
- Author(s)
  前野　智美，　谷口　俊哉，　森謙一郎
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  つくば国際会議場
- Data Source
  KAKENHI-PROJECT-25820368
[Presentation] ほか,板鍛造における荷重振動を用いたステンレス鋼部品の段差付け加工2011
- Author(s)
  前野智美
- Organizer
  日本塑性加工学会平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] 板鍛造における荷重振動を用いたステンレス鋼部品の段差付け加工2011
- Author(s)
  前野智美, ほか
- Organizer
  日本塑性加工学会平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-28
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] サーボプレスを用いた摩擦を低減する荷重振動鍛造2011
- Author(s)
  前野智美
- Organizer
  TECH Biz EXPO2011大学若手研究者シーズ発表会
- Place of Presentation
  ポートメッセなごや
- Year and Date
  2011-10-20
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] せん断・成形・ダイクエンチを一体化した1ショットホットスタンピング2011
- Author(s)
  山田弘明,森謙一郎,前野智美,家田和典
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  ホテル日航豊橋
- Year and Date
  2011-10-27
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] サーボプレスを用いた摩擦を低減する荷重振動鍛造2011
- Author(s)
  前野智美
- Organizer
  日本塑性加工学会プロセス・トライボロジー分科会132回研究会
- Place of Presentation
  大阪大学
- Year and Date
  2011-12-06
- Data Source
  KAKENHI-PROJECT-22760555
[Presentation] 板歯車のホットブラシキング・ダイクエンチ2011
- Author(s)
  前野智美, 山田弘明, 森謙一郎
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] ダイクエンチ鋼板の局部通電加熱小穴抜き加工2011
- Author(s)
  森謙一郎,丸尾佳広,前野智美
- Organizer
  平成23年度塑性加工春季講演会
- Place of Presentation
  早稲田大学
- Year and Date
  2011-05-29
- Data Source
  KAKENHI-PROJECT-21360360
[Presentation] 摩擦援用および背圧付加押出しによるNd-Fe-B磁性粉末の高結合化
- Author(s)
  前野智美, 谷口俊哉，森謙一郎
- Organizer
  平成26年度塑性加工春季講演会
- Place of Presentation
  つくば国際会議場
- Year and Date
  2014-06-06 – 2014-06-08
- Data Source
  KAKENHI-PROJECT-25820368
[Presentation] 強加工圧粉によるNd-Fe-B円筒ボンド磁石の強度向上
- Author(s)
  前野智美，谷口俊哉，森謙一郎
- Organizer
  平成27年度塑性加工春季講演会
- Place of Presentation
  慶應義塾大学　矢上キャンパス
- Year and Date
  2015-05-29 – 2015-05-31
- Data Source
  KAKENHI-PROJECT-25820368

1. MORI Kenichiro (80127167)

# of Collaborated Projects: 4 results

# of Collaborated Products: 15 results
2. ABE Yohei (60402658)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. OSAKADA Kozo (50031109)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
4. 中川佑貴 (50837739)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. NAKAMURA Akihro

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. HORI Ayumi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. ICHIKAWA Yuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

Maeno Tomoyoshi 前野 智美

MAENO Tomoyoshi 前野 智美

Research Projects

Research Products

Co-Researchers

Development of tailored hot stamping having high productivity using partial control of cooling historyOngoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of hot stamping of age-hardened aluminium alloy sheet using contact heating without solution heat treatmentPrincipal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of environmentally benign lubrication system using liquid lubricant with pulsating slide motion of servo pressPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Consolidation by severe plastic deformation in compaction of magnetic powder cores and bonded magnetsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Investigation of mechanism of load pulsation, and applying for forming of parts having small thicknessPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of shearing process of ultra-high strength steel sheets using local resistance heating

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] サーボプレスを活用した低サイクル振動モーションを用いた自動再潤滑2018

Author(s)

Journal Title

Data Source

[Journal Article] Use of liquid lubricant for backward extrusion of cup with internal splines using pulsating motion2017

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012

Author(s)

Journal Title

Data Source

[Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Punching of small hole of die-quenched steel sheets using local resistance heating2012

Author(s)

Journal Title

Data Source

[Journal Article] Punching of ultra-high strength steel sheets using local resistance heating of shearing zone2012

Author(s)

Journal Title

Data Source

[Journal Article] ダイクエンチされた鋼板の局部通電加熱小穴抜き加工2011

Author(s)

Journal Title

Data Source

[Journal Article] Reduction of Friction in Compression of Plates by Load Pulsation2011

Author(s)

Journal Title

Data Source

[Journal Article] バイパス通電加熱を用いたプレス成形による強度分布を有する超高張力鋼成形品の製造2011

Author(s)

Journal Title

Data Source

[Journal Article] ダイクエンチされた鋼板の局部通電加熱を用いた温・熱間小穴抜き加工2010

Maeno Tomoyoshi 前野智美

MAENO Tomoyoshi 前野智美