saotome yasunori 早乙女康典

… Alternative Names

Researcher Number	90143198
Other IDs
External Links
Affiliation (Current)	2022: 早稲田大学, 理工学術院(環境・エネルギー研究科・環境総合研究センター), 客員上級研究員(研究院客員教授)
Affiliation (based on the past Project Information) *help	2016: 東北大学, 金属材料研究所, 教授 2009 – 2014: Tohoku University, 金属材料研究所, 教授 2006 – 2007: 東北大学, 金属材料研究所, 教授 2005: 群馬大学, 大学院工学研究科, 教授 2003 – 2004: 群馬大学, 大学院・工学研究科, 教授 … More
Review Section/Research Field	Principal Investigator Material processing/treatments / 金属加工(含鋳造) / Material processing/treatments / 機械工作・生産工学 Except Principal Investigator Science and Engineering / Production engineering/Processing studies / Material processing/Microstructural control engineering
Keywords	Principal Investigator 塑性加工 / アモルファス合金 / 急速加熱 / 金属ガラス / 結晶化 / マイクロ加工 / 深絞り / 極薄板 / 箔 / 多結晶塑性 … More Except Principal Investigator 金属ガラス / ナノ材料 / 過冷却液体 / 粘性 / 変形挙動 / 超精密加工 / フラジリティー / 超塑性 / 接合 / アモルファス固体 / フラジリティ / フラジリテイ / 粘性流動 / 精密加工 / ガラス遷移 / フラジリテイー / ナノ / マイクロ加工 / 金型 / ガラス成形 / アモルファス合金 / コンビナトリアル探索 / ナノ加工 / 結晶化開始温度 / Ptフリー / 精密部品加工 / 電解析出 / Ni-W合金 / ナノ結晶 / アモルファス / 加工硬化 / 放射光 / マイクロビーム / 金属物性 / 材料・加工処理 Less

Development of high strength nanocrystalline alloys with high ductility controlled by dynamic structural changes during plastic deformation
- Principal Investigator
  
  Yamasaki Tohru
- Project Period (FY)
  2013 – 2016
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  University of Hyogo
Measurement of structural changes in metallic glass under super rapid heating and the applicationPrincipal Investigator
- Principal Investigator
  
  SAOTOME Yasunori
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Material processing/treatments
- Research Institution
  Tohoku University
Micro/Nanoformability and properties of metallic materials for MEMSPrincipal Investigator
- Principal Investigator
  
  SAOTOME Yasunori
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tohoku University
Combinatorial Search and Nanoprocessing of Pt-free Amorphous Alloys for Glass Molding Die
- Principal Investigator
  
  HATA Seiichi
- Project Period (FY)
  2008 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (S)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
金属ガラスの過冷却液体の変形・粘性と成型加工プロセス
- Principal Investigator
  
  河村能人
- Project Period (FY)
  2003 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Kumamoto University
アモルファス合金の超急速加熱制御・ナノ3次元形状転写加工法の開発Principal Investigator
- Principal Investigator
  
  早乙女康典
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  機械工作・生産工学
- Research Institution
  Gunma University
加工組立型産業地域でのゼロエミッションのためのデータベース構築Principal Investigator
- Principal Investigator
  
  早乙女康典
- Project Period (FY)
  1999
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas (A)
- Research Institution
  Gunma University
マイクロマシン創製用超塑性材料のナノ成形加工特性に関する研究Principal Investigator
- Principal Investigator
  
  早乙女康典
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Gunma University
箔のマイクロ成形加工における多結晶塑性力学特性Principal Investigator
- Principal Investigator
  
  早乙女康典
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Gunma University

All 2012 2011 2010 2009 2007 2005 2004 Other

All Journal Article Presentation Book Patent

[Book] 金属ガラスの基礎と産業への応用2009
- Author(s)
  早乙女康典, 他
- Total Pages
  650
- Publisher
  (株)テクノシステム
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Fabrication of nanodot array mold with 2 Tdot/in.2 for nanoimprint using metallic glass2012
- Author(s)
  (Y. Fukuda), Y.Saotome, N.Nishiyama, K.Takenaka, N.Saidoh, E.Makabe, A.Inoue
- Journal Title
  
  J. Vac. Sci. Technol. B
  
  Volume: 30
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Influence of substrate temperature on structure and adhesion strength of Fe-Cr-P-C amorphous coating films produced by thermal spraying technique2012
- Author(s)
  (M.Komaki), T.Miura, R.Kurahashi, H.Odahara, K.Amiya, Y.Saotome, T.Yamasaki
- Journal Title
  
  Materials Transactions
  
  Volume: 53 Pages: 681-689
- NAID
  10030550751
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Fabrication of Molds with 25-nm Dot-Pitch Pattern by Focused Ion Beam and Reactive Ion Etching for Nanoimprint Using Metallic Glass2012
- Author(s)
  Y.Fukuda、Y.Saotome、N.Nishiyama、N.Saidoh、E.Makabe、A.Inoue
- Journal Title
  
  Jpn. J. Appl. Phys.
  
  Volume: 51巻 Pages: 086702-086702
- DOI
  10.1143/jjap.51.086702
- ISSN
  0021-4922, 1347-4065
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Influence of Substrate Temperature on Structure and Adhesion Strength of Fe–Cr–P–C Amorphous Coating Films Produced by Thermal Spraying Technique2012
- Author(s)
  M. Komaki, T. Miura, R. Kurahasi, H. Odahara, K. Amiya, Y. Saotome and T. Yamasaki
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: Vol. 53 (2012), Issue 4 Issue: 4 Pages: 681-689
- DOI
  10.2320/matertrans.m2011261
  10.2320/matertrans.M2011261
- NAID
  130004694436
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246112, KAKENHI-PROJECT-23656448
[Journal Article] Fabrication of nanodot array mold with 2 Tdot/in.2 for nanoimprint usingmetallic glass2012
- Author(s)
  Y.Fukuda、Y.Saotome、N.Nishiyama、et al
- Journal Title
  
  J. Vac. Sci. Technol. B
  
  Volume: 30巻
- DOI
  10.1116/1.4761472
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Influence of Substrate Temperature on the Structure and Cohesive/Adhesive Strength of Fe–Co–Si–B–Nb Metallic Glass Coating Films Produced by Thermal Spraying2012
- Author(s)
  M. Komaki, T. Miura, S. Tsuji, K. Amiya, Y. Saotome and T. Yamasaki
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: Vol. 53 (2012), Issue 12 Issue: 12 Pages: 2151-2155
- DOI
  10.2320/matertrans.m2012282
  10.2320/matertrans.M2012282
- NAID
  130004454896
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21246112, KAKENHI-PROJECT-23656448, KAKENHI-PLANNED-22102004
[Journal Article] Influence of Substrate Temperature on the Structure and Cohesive/Adhesive Strength of Fe-Co-Si-B-Nb Metallic Glass Coating Films Produced by Thermal Spraying2012
- Author(s)
  (M. Komaki), K. Amiya, Y. Saotome, T. Yamasaki et al.
- Journal Title
  
  Materials Transactions
  
  Volume: 53 Pages: 2151-2159
- NAID
  10031127222
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Glassy alloy composites for bit-patterned-media2011
- Author(s)
  N. Nishiyama、K. Takenaka、 N. Saidoh、M. Futamoto、Y. Saotome、A. Inoue
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: Vol.509
- DOI
  10.1016/j.jallcom.2010.12.020
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355, KAKENHI-PROJECT-23656448
[Journal Article] Effect of Au Content on Thermal Stability and Mechanical Properties of Au-Cu-Ag-Si Bulk Metallic Glasses2011
- Author(s)
  H. Guo、W. Zhang、M. W. Chen、Y. Saotome、 M. Fukuhara、A. Inoue
- Journal Title
  
  Metallurgical and Materials Transactions A
  
  Volume: Vol.42 Pages: 1486-1490
- DOI
  10.1007/s11661-010-0584-9
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355, KAKENHI-PROJECT-23656448
[Journal Article] Nanoimprinting of Metallic Glass for Periodic Nano-Hole Structures with Dies Fabricated by FIB-CVD and RIE2011
- Author(s)
  Y. Fukuda、Y. Saotome、H. Kimura、A. Inoue
- Journal Title
  
  Materials Transactions
  
  Volume: Vol.52 Pages: 239-242
- NAID
  10027837804
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Plastic Working of Metallic Glass Bolts by Cold Thread Rolling2011
- Author(s)
  山中茂, 網谷健児, 早乙女康典, 井上明久
- Journal Title
  
  Materials Transactions
  
  Volume: 52 Pages: 243-249
- NAID
  10027837820
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Nanoimprinting of Metallic Glass for Periodic Nano-Hole Structures with Dies Fabricated by FIB-CVD and RIE2011
- Author(s)
  福田泰行, 早乙女康典, 木村久道, 井上明久
- Journal Title
  
  Materials Transactions
  
  Volume: 52 Pages: 239-242
- NAID
  10027837804
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Plastic Working of Metallic Glass Bolts by Cold Thread Rolling2011
- Author(s)
  S.Yamanaka、K.Amiya、Y.Saotome and A.Inoue
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 52巻 Issue: 2 Pages: 243-249
- DOI
  10.2320/matertrans.m2010292
  10.2320/matertrans.M2010292
- NAID
  10027837820
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Glassy alloy composites for bit-patterned-media, (online Dec.2010)2011
- Author(s)
  西山信行, 竹中佳生, 西洞紀子, 二本, 早乙女康典, 井上明久
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: (online Dec.2010)(印刷中)(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Plastic Working of Metallic Glass Bolts by Cold Thread Rolling2011
- Author(s)
  S. Yamanaka、K. Amiya、Y. Saotome、A. Inoue
- Journal Title
  
  Materials Transactions
  
  Volume: Vol.52 Pages: 243-249
- NAID
  10027837820
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Nanoimprinting of Metallic Glass for Periodic Nano-Hole Structures with Dies Fabricated by FIB-CVD and RIE2011
- Author(s)
  Y.Fukuda、Y.Saotome、H.Kimura and A.Inoue
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 52巻 Issue: 2 Pages: 239-242
- DOI
  10.2320/matertrans.m2010241
  10.2320/matertrans.M2010241
- NAID
  10027837804
- ISSN
  1345-9678, 1347-5320
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23656448
[Journal Article] Structure, morphology and magnetic properties of Fe. B. Si. Nb glassy alloy thin film prepared by a pulsed laser deposition method2009
- Author(s)
  K. Takenaka、T. Sugimoto、N. Nishiyama、A. Makino、Y. Saotome、et. al
- Journal Title
  
  Materials Letters
  
  Volume: Vol.63 Pages: 1895-1897
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Structure, morphology and magnetic properties of Fe.B.Si.Nb glassy alloy thin film prepared by a pulsed laser deposition method2009
- Author(s)
  竹中, 杉本, 西山, 牧野, 早乙女康典
- Journal Title
  
  Materials Letters 63
  
  Pages: 1895-1897
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] New Au-based bulk glassy alloys with ultralow glass transition temperature2009
- Author(s)
  W. Zhang、H. Guo、M. W. Chen、Y. Saotome、 C. L. Qin、A. Inoue
- Journal Title
  
  Scripta Materialia
  
  Volume: Vol.61 Pages: 744-747
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] New Au-based bulk glassy alloys with ultralow glass transition temperature2009
- Author(s)
  張偉, 郭海, 陳明偉, 早乙女康典
- Journal Title
  
  Scripta Materialia 61
  
  Pages: 744-747
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360355
[Journal Article] Superplastic nanoforming of optical components of Pt-based metallic glass2007
- Author(s)
  Y.Saotome, Y.Fukuda, I.Yamaguchi, A.Inoue
- Journal Title
  
  Journal of Alloys and Compounds 434-435
  
  Pages: 97-101
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] Superplastic Nanoforging of Pt-Based Metallic Glass with Dies of Zr-BMG and Glassy Carbon Fabricated by Focused Ion Beam2007
- Author(s)
  Y. Saotome
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 2088-2093
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] Superplastic Nanoforming of Optical Components of Pt-Based Metallic Glass2007
- Author(s)
  Y. Saotome
- Journal Title
  
  J. of Alloys and Compounds 434-435
  
  Pages: 97-101
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] Superplastic nanoforging of Pt-based metallic glass with dies of Zr-BMG and glassy carbon fabricated by focused ion beam2007
- Author(s)
  Y.Saotome, S.Okaniwa, H.Kimura, A.Inoue
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 2088-2093
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] Characterization of super-precision microgear made of Ni-based metallic glass, J. of Metastable and Nanocrystalline Materials2005
- Author(s)
  M.Ishida, H.Takeda, N.Nishiyama, Y.Shimizu, K.Kita, Y.Saotome, A.Inoue
- Journal Title
  
  J. of Metastable and Nanocrystalline Materials 24-25
  
  Pages: 543-546
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] Nanoforming of metallic glass with nano-scale die fabricated by focused ion beam2005
- Author(s)
  Y.Saotome, S.Okaniwa, T.Zhang, A.Inoue
- Journal Title
  
  J. of Metastable and Nanocrystalline Materials 24-25
  
  Pages: 291-294
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] Characteristic Behavior of Pt-Based Metallic Glass under Rapid Heating and Its Application to Microforming2004
- Author(s)
  Y.Saotome et al.
- Journal Title
  
  Journal of Materials Science and Engineering A Vol.375-377
  
  Pages: 389-393
- Data Source
  KAKENHI-PROJECT-15074216
[Journal Article] 電鋳によるマイクロ金型とマイクロ・ナノ部品の開発2004
- Author(s)
  早乙女康典
- Journal Title
  
  表面技術 Vol.55
  
  Pages: 248-253
- Data Source
  KAKENHI-PROJECT-15074216
[Patent] 非結晶質合金の成型方法および該成型方法で作製した成型物2012
- Inventor(s)
  井上陽一、橋間隆、早乙女康典
- Industrial Property Rights Holder
  ヘイシンテクノベルク株式会社、東北大学
- Industrial Property Number
  2012-042613
- Filing Date
  2012-02-29
- Data Source
  KAKENHI-PROJECT-23656448
[Patent] 非結晶質合金の成型方法および該成型方法で作製した成型物2012
- Inventor(s)
  橋間隆, 井上陽一, 早乙女康典, 網谷健児
- Industrial Property Rights Holder
  ヘイシンテクノベルク株式会社, 東北大学
- Industrial Property Number
  2012-042613
- Filing Date
  2012-02-29
- Data Source
  KAKENHI-PROJECT-21360355
[Patent] トルクセンサおよびその製造方法2011
- Inventor(s)
  小牧正博、蒲田繁夫、早乙女康典
- Industrial Property Rights Holder
  中山製鋼所、サンエテック、東北大学
- Industrial Property Number
  2011-135783
- Filing Date
  2011-06-17
- Data Source
  KAKENHI-PROJECT-23656448
[Patent] 精密歯車、その歯車機構及び精密歯車の製造方法2011
- Inventor(s)
  井上明久、清水幸春、喜多和彦、渡邉大智、石田央、竹田英樹、早乙女康典
- Industrial Property Rights Holder
  並木精密宝石株式会社、YKK株式会社、井上明久、早乙女康典
- Filing Date
  2011-08-12
- Data Source
  KAKENHI-PROJECT-21360355
[Patent] 金属デポジッションを用いたナノインプリント金型の製造方法2010
- Inventor(s)
  福田泰行, 真壁英一, 早乙女康典, 二本正昭, 西山信行, 井上明久
- Industrial Property Rights Holder
  国立大学法人東北大学, 株式会社BMG
- Industrial Property Number
  2010-282292
- Filing Date
  2010-12-17
- Data Source
  KAKENHI-PROJECT-21360355
[Patent] 金属ガラス製品の製造方法および異種材料複合体2010
- Inventor(s)
  竹崎陽二, 早乙女康典, 網谷健児, 島田登, 浅井弘, 天野和弘, 大隈厚士, 舩山勉, 齋藤飛鳥, 太田甲吉, 鈴木佑輔
- Industrial Property Rights Holder
  ポーライト株式会社, 国立大学法人東北大学
- Industrial Property Number
  2010-011152
- Filing Date
  2010-05-13
- Data Source
  KAKENHI-PROJECT-21360355
[Patent] 高延性,高耐食性で耐遅れ破壊性に優れたNi基アモルファス合金2010
- Inventor(s)
  倉橋隆郎, 小池正博, 三村, 早乙女康典, 網谷健児
- Industrial Property Rights Holder
  ポーライト株式会社, 国立大学法人東北大学
- Industrial Property Number
  2010-235968
- Filing Date
  2010-10-20
- Data Source
  KAKENHI-PROJECT-21360355
[Patent] 光学素子、成形金型、光学素子の製造方法、マイクロ化学チップおよび分光分析装置2005
- Inventor(s)
  早乙女康典, 井上明久
- Industrial Property Rights Holder
  群馬大学, 東北大学, (株)BMG
- Industrial Property Number
  2005-363395
- Filing Date
  2005-12-06
- Data Source
  KAKENHI-PROJECT-15074216
[Presentation] 金属ガラス締結ねじの成形と特性2012
- Author(s)
  山中茂、網谷健児、早乙女康典
- Organizer
  粉体粉末冶金協会H24秋季大会
- Place of Presentation
  滋賀県草津
- Year and Date
  2012-11-20
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Preparation of high corrosion resistance Ni-Mo-B amorphous alloys and their thermal spray coatings2012
- Author(s)
  K.Amiya 、T. Mimura 、Y.Saotome
- Organizer
  2012Powder Metallurgy World Congress(PM2012)
- Place of Presentation
  横浜
- Year and Date
  2012-10-16
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Superplastic Nanoforming of Zr-based Metallic Glass at High Strain Rate under Rapid Heating2012
- Author(s)
  Y.Saotome 、H.Miyasaka 、K.Amiya 、A.Inoue
- Organizer
  5th Asian Workshop on Micro/Nano Forming Technology(AWMFT-2012)
- Place of Presentation
  Harbin、China
- Year and Date
  2012-08-24
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Mass-Production of Nano-Dies by Nanoimprint of Metallic Glasses2012
- Author(s)
  Y.Saotome,Y.Fukuda、K.Amiya、W.Zhang
- Organizer
  The 3rd Asian Symposium on Materials & Processing
- Place of Presentation
  Chennai、India
- Year and Date
  2012-08-30
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Ni-Mo-B系アモルファス合金の機械的性質と耐食性2012
- Author(s)
  網谷健児、三村恒裕、早乙女康典、倉橋隆郎
- Organizer
  日本金属学会2011秋期(第150回)大会
- Place of Presentation
  沖縄
- Year and Date
  2012-11-08
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Metallic Glasses as Micro/Nano-Materials for Advanced Manu-facturing2012
- Author(s)
  Y. Saotome
- Organizer
  2012 International Con-ference on Advanced Manufacturing
- Place of Presentation
  Jiaoxi、台湾
- Year and Date
  2012-03-05
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Metallic Glasses as Micro/Nano-Materials for Advanced Manufacturing2012
- Author(s)
  Y.Saotome
- Organizer
  2012 International Conference on Advanced Manufacturing
- Place of Presentation
  Jiaoxi、Yilan、Taiwan
- Year and Date
  2012-03-04
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] 塑性加工による金属ガラスボルトの締結特性とゆるみ評価2012
- Author(s)
  山中茂、網谷健児、早乙女康典
- Organizer
  第56回日本学術会議材料工学連合講演会
- Place of Presentation
  京都
- Year and Date
  2012-10-29
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Development of a Micro GearedMotor with f f 0.9 mm Outer Diameter2012
- Author(s)
  Y.Saotome、N.Toghashi、Y.Shimizu、A.Inoue
- Organizer
  10th Int. Conf. on Multi-Material Micro Manufacture
- Place of Presentation
  Vienna、Austria
- Year and Date
  2012-10-09
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] 高耐食Ni基アモルファス合金とその溶射皮膜の作製2012
- Author(s)
  網谷健児、三村恒裕、早乙女康典
- Organizer
  粉体粉末冶金協会H24秋期大会
- Place of Presentation
  滋賀県草津
- Year and Date
  2012-11-20
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Ni-X-B系(X=Cr、Mo、Nb)アモルファス合金の機械的性質と耐食性2012
- Author(s)
  網谷健児、早乙女康典、三村恒裕、倉橋隆郎
- Organizer
  日本金属学会2012秋期(第151回)大会
- Place of Presentation
  松山
- Year and Date
  2012-09-19
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] High Throughput Nanoimprinting of Glassy Alloys2012
- Author(s)
  Y.Saotome,H.Miyasaka、K.Amiya、A.Inoue
- Organizer
  38th Int. Conf. on Micro and Nano Engineering
- Place of Presentation
  Toulouse、France
- Year and Date
  2012-09-16
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] FIB-CVDマスクパターニングとRIEによる2Tbit/inch2超高密度ドット配列金型の創製と金属ガラスのナノインプリント2011
- Author(s)
  福田泰行、早乙女康典、西山信行、竹中佳生、西洞紀子、井上明久
- Organizer
  応用物理学会次世代リソグラフィ(NGL)技術研究会
- Place of Presentation
  東京
- Year and Date
  2011-07-11
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Metallic Glasses as Micro/Nano-Materials for MEMS/NEMS2011
- Author(s)
  Y.Saotome
- Organizer
  9th Int. Workshop on High-Aspect-Ratio Micro Structure Tech.(招待講演)
- Place of Presentation
  Himeji, Japan
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] 室温転造加工によるZr55Cu30Al10Ni5金属ガラスボルトの強度と締結特性2011
- Author(s)
  山中茂、網谷健児、早乙女康典
- Organizer
  第55回日本学術会議材料工学連合講演会
- Place of Presentation
  京都
- Year and Date
  2011-10-19
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Low Viscosity Behavior of Zr-based Metallic Glass under Rapid Heating and Its Application to High Strain Rate Superplastic Nanoforming2011
- Author(s)
  Y.Saotome, K.Amiya, A.Inoue
- Organizer
  Int. Conf. on Processing & Manufacturing of Advanced Materials(招待講演)
- Place of Presentation
  Quebec, Canada
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Metallic Glasses as Micro/Nano-Materials for MEMS/NEMS2011
- Author(s)
  Y.Saotome
- Organizer
  9th Int.Workshop on High-Aspect-Ratio Micro Structure Tech.
- Place of Presentation
  Himeji, Japan(招待講演)
- Year and Date
  2011-06-17
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Fabrication of Nanodot Array with Ultrahigh Density of 2 Tbit/inch2 by FIB-CVD Mask Patterning and RIE、and Nanoimprint of Metallic Glass2011
- Author(s)
  Y.Fukuda、Y.Saotome、N.Nishiyama、K.Takenaka 、N.Saidoh 、E.Makabe 、A.Inoue
- Organizer
  International Conference on Materials for Advanced Technologies
- Place of Presentation
  Suntec、Singapore
- Year and Date
  2011-06-26
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Metallic Glasses as Micro/Nano-Materials for MEMS/NEMS2011
- Author(s)
  Y. Saotome
- Organizer
  9th Int. Workshop on High-Aspect-Ratio Micro Structure Tech
- Place of Presentation
  Himeji, Japan
- Year and Date
  2011-06-17
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Preparation of high corrosion resistance Ni-Mo-B amorphous alloy and their thermal spray coating film2011
- Author(s)
  K.Amiya、T. Mimura、Y.Saotome、R.Kurahashi
- Place of Presentation
  Qubec City、Canada
- Year and Date
  2011-08-04
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Superplastic Nanoforming of Zr-based Metallic Glass at High Strain Rate under Rapid Heating2011
- Author(s)
  Y.Saotome, H.Miyasaka, K.Amiya, A.Inoue
- Organizer
  JSME/ASME2011 Int.Conf.on Materials and Processing
- Place of Presentation
  Oregon State Univ., Corvallis, Oregon, USA
- Year and Date
  2011-06-13
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Superplastic Nanoforming ofZr-based Metallic Glass at High StrainRate under Rapid Heating2011
- Author(s)
  Y.Saotome 、H.Miyasaka 、K.Amiya 、A.Inoue
- Organizer
  JSME/ASME2011 Int. Conf. on Materials and Processing
- Place of Presentation
  Corvallis、Oregon、USA
- Year and Date
  2011-06-13
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Metallic Glasses as Micro/Nano-Materials for MEMS/NEMS2011
- Author(s)
  Y.Saotome
- Organizer
  9th Int. Workshop on High-Aspect- Ratio Micro Structure Tech
- Place of Presentation
  Himeji、Hyogo
- Year and Date
  2011-06-12
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Ni‐Mo‐B系アモルファス合金の機械的性質と耐食性2011
- Author(s)
  網谷健児、三村恒弘、早乙女康典、倉橋隆郎
- Organizer
  粉体粉末冶金協会H23春季大会
- Place of Presentation
  東京
- Year and Date
  2011-05-30
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] LowViscosity Behavior of Zr-based Metallic Glass under Rapid Heating and Its Application to High Strain Rate Superplastic Nanoforming2011
- Author(s)
  Y.Saotome 、K.Amiya 、A.Inoue
- Organizer
  Int. Conf. on Processing & Manufacturing of Advanced Materials
- Place of Presentation
  Quebec、Canada
- Year and Date
  2011-08-01
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] 金属ガラスの超塑性成形加工によるマイクロ金型の創製と量産化法2011
- Author(s)
  早乙女康典、網谷健児、張偉、小田原大貴
- Organizer
  粉体粉末冶金協会H23春季大会
- Place of Presentation
  東京
- Year and Date
  2011-05-30
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Nanoimprint of 18 nm-pitch ultrafine pattern on metallic glass with mold fabricated by focused ion beam and reactive ion etching2011
- Author(s)
  Y.Fukuda、Y.Saotome、N.Nishiyama、K.Takenaka 、N.Saidoh 、E.Makabe、A.Inoue
- Organizer
  4th Asian Workshop on Nano/Micro Forming Technology
- Place of Presentation
  浜松
- Year and Date
  2011-10-26
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Superplastic Nanoforming of Zr-based Metallic Glass at High Strain Rate under Rapid Heating2011
- Author(s)
  Y.Saotome, H.Miyasaka, K.Amiya, A.Inoue
- Organizer
  JSME/ASME2011 Int. Conf. on Materials and Processing
- Place of Presentation
  Oregon State Univ., Corvallis, Oregon, USA
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Low Viscosity Behavior of Zr-based Metallic Glass under Rapid Heating and Its Application to High Strain Rate Superplastic Nanoforming、Int2011
- Author(s)
  Y. Saotome、K. Amiya、A. Inoue
- Organizer
  Conf. on Processing & Manufacturing of Advanced Materials
- Place of Presentation
  Quebec、 Canada
- Year and Date
  2011-08-02
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Low Viscosity Behavior of Zr-based Metallic Glass under Rapid Heating and Its Application to High Strain Rate Superplastic Nanoforming2011
- Author(s)
  Y.Saotome, K.Amiya, A.Inoue
- Organizer
  Int.Conf.on Processing & Manufacturing of Advanced Materials
- Place of Presentation
  Quebec, Canada(招待講演)
- Year and Date
  2011-08-02
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] 極微細領域における金型創製と金属ガラスのナノインプリント成形加工2011
- Author(s)
  福田泰行、早乙女康典、西山信行、竹中佳生、西洞紀子、井上明久
- Organizer
  第55回日本学術会議材料工学連合講演会
- Place of Presentation
  京都
- Year and Date
  2011-10-19
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] State of the art in microforming in Japan and view in the future2010
- Author(s)
  Y.Saotome
- Organizer
  Int.Forum on Micro Manufacturing 2010
- Place of Presentation
  岐阜,日本(Invited)
- Year and Date
  2010-10-23
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] 金属ガラスの変形に関する研究の現状と実用化への展望2010
- Author(s)
  早乙女康典
- Organizer
  第54回日本学術会議材料工学連合講演会
- Place of Presentation
  京都(基調講演)
- Year and Date
  2010-10-26
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Nanoimprint of Pt-based Metallic Glass of Pitch 25 nm Nano-Dots Array with Dies Fabricated by FIB-CVD & RIE Process2010
- Author(s)
  Y.Fukuda, Y.Saotome, A.Inoue
- Organizer
  Int.Forum on Micro Manufacturing 2010 (IFMM' 10)
- Place of Presentation
  岐阜
- Year and Date
  2010-10-21
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] 冷間塑性加工(転造)によるZr基金属ガラスの小型締結ねじの開発2010
- Author(s)
  山中茂, 網谷健児, 早乙女康典, 井上明久
- Organizer
  第54回日本学術会議材料工学連合講演会
- Place of Presentation
  京都
- Year and Date
  2010-10-26
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Nanoimprint of Pt-based Metallic Glass with dies of Periodic Structure of 25 nm in Pitch Fabricated by FIB-CVD & RIE2010
- Author(s)
  Y.Fukuda, Y.Saotome, A.Inoue
- Organizer
  The 3rd Asian Symposium on NanoImprint Lithography (ANSIL 2010)
- Place of Presentation
  筑波
- Year and Date
  2010-07-01
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] sub-20nmドット構造のナノインプリント特性と金属ガラスの濡れ性の効果2010
- Author(s)
  福田泰行, 早乙女康典, 西山信行, 井上明久
- Organizer
  第54回日本学術会議材料工学連合講演会
- Place of Presentation
  京都
- Year and Date
  2010-10-26
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] 精密成型加工によるマイクロ金型の創製と量産化法2010
- Author(s)
  早乙女康典, 網谷健児, 小田原大貴
- Organizer
  第61回塑性加工連合講演会
- Place of Presentation
  米沢
- Year and Date
  2010-10-17
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Fabrication of Machine Parts of Metallic Glasses2010
- Author(s)
  Y. Saotome、A. Inoue
- Organizer
  Materials Research Society 2010 Fall Meeting
- Place of Presentation
  Boston、USA
- Year and Date
  2010-12-03
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Fabrication of machine parts of metallic glasses2010
- Author(s)
  Y.Saotome, A.Inoue
- Organizer
  Materials Research Society Fall Meeting
- Place of Presentation
  Boston, USA(Invited)
- Year and Date
  2010-11-29
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] World Smallest Micro Geared Motor made of Metallic Glasses2010
- Author(s)
  Y.Saotome, Y.Shimizu, K.Amiya, K.Kita, N.Nishiyama, A.Inoue
- Organizer
  The 3rd Asian Workshop on Nano/Micro Forming Technology (AWMFT-2010)
- Place of Presentation
  Jeju, Korea(Invited)
- Year and Date
  2010-10-07
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Development of Zr-Based Metallic Glass Bolt Formed by Cold Thread Rolling2010
- Author(s)
  S.Yamanaka, K.Amiya, Y.Saotome, A.Inoue
- Organizer
  17th Int.Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAMA2010)
- Place of Presentation
  Zurich, Switzerland
- Year and Date
  2010-07-07
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Fatigue Behavior of Ni-Based Metallic Glass2010
- Author(s)
  Y.Saotome, J.Hatcho, M.Ishida, H.Takeda, N.Nishiyama, A.Inoue
- Organizer
  17th Int.Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAMA2010)
- Place of Presentation
  Zurich, Switzerland
- Year and Date
  2010-07-05
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Metallic Glasses as Micro/Nano-Materials for Micromanufacturing2010
- Author(s)
  Y.Saotome, Y.Fukuda, K.Amiya, Y.Shimizu, A.Inoue
- Organizer
  The 5th International Conference on MicroManufacturing (ICOMM/4M 2010)
- Place of Presentation
  Madison, WI, USA
- Year and Date
  2010-04-06
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Nanoimprint of nanodot structures of metallic glasses2010
- Author(s)
  Y. Saotome
- Organizer
  11th IUMRS Int. Conf. in Asia
- Place of Presentation
  Qingdao、China
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Nanoimprint of nanodot structures of metallic glasses2010
- Author(s)
  Y.Saotome
- Organizer
  11th IUMRS Int.Conf.in Asia
- Place of Presentation
  青島,中国(invited)
- Year and Date
  2010-09-27
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Glassy Alloy Composites for Bit-Patterned-Media2010
- Author(s)
  N.Nishiyama, K.Takenaka, N.Saidoh, M.Futamoto, Y.Saotome, A.Inoue
- Organizer
  17th Int.Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAMA2010)
- Place of Presentation
  Zurich, Switzerland
- Year and Date
  2010-07-09
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Metallic Glasses as Micro/Nano-Materials for MEMS/NEMS(招待講演)2009
- Author(s)
  早乙女康典
- Organizer
  The 16th International Symposium on Metastable Amorphous and Nanostructured Materials(ISMANAM2009)
- Place of Presentation
  北京,中国
- Year and Date
  2009-07-08
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Glass Transition and Crystallization Behavior of Zr-Based Metallic Glass under Rapid Heating2009
- Author(s)
  坂本幸雄, 早乙女康典, 網谷健児
- Organizer
  The 7th International Conference on Bulk Metallic Glasses (BMG VII)
- Place of Presentation
  釜山,韓国
- Year and Date
  2009-11-03
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Metallic Glasses as Micro/Nano-Materials for MEMS/NEMS2009
- Author(s)
  Y. Saotome、A. Inoue
- Organizer
  The 16th Int. Symposium on Metastable, Amorphous and Nanostructured Materials(ISMANAM 2009)
- Place of Presentation
  Beijing、 China
- Year and Date
  2009-07-08
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Fatigue Behavior Of Ni-Nb-Ti-Zr-Co-Cu Metallic Glass2009
- Author(s)
  早乙女康典
- Organizer
  International Conference on Processing & Manufacturing of Advanced Materials (Themec'2009)
- Place of Presentation
  ベルリン,ドイツ
- Year and Date
  2009-08-26
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Development of Palmtop Wear Testing Machine and Wear Resistance of Ni-based Metallic Glass2009
- Author(s)
  早乙女康典
- Organizer
  The 16th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM2009)
- Place of Presentation
  北京,中国
- Year and Date
  2009-07-06
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Characteristic Behavior of Nanoimprint of Metallic Glasses(招待講演)2009
- Author(s)
  早乙女康典
- Organizer
  4th International Symposium on Nano and Amorphous Materials
- Place of Presentation
  Pohang,韓国
- Year and Date
  2009-11-06
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Diaphram of Metallic Glass for Hybrid MEMS Pressure Sensor(招待講演)2009
- Author(s)
  早乙女康典
- Organizer
  The 7th International Conference on Bulk Metallic Glasses(BMG VII)
- Place of Presentation
  釜山,韓国
- Year and Date
  2009-11-05
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] FIB-CVD/RIEプロセスによるピッチ25nmドット金型の創製と金属ガラスのナノインプリント2009
- Author(s)
  福田泰行, 真壁英一, 早乙女康典
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  長野
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Glass Transition and Crystallization Behavior of Zr-Based Metallic Glass under Rapid Heating2009
- Author(s)
  坂本幸雄, 早乙女康典, 網谷健児
- Organizer
  18th International Symposium on Processing and Fabrication of Advanced Materials (PFAMXVIII)
- Place of Presentation
  仙台
- Year and Date
  2009-12-12
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] Fe基金属ガラスのナノインプリント特性2009
- Author(s)
  網谷健児, 早乙女康典
- Organizer
  第60回塑性加工連合講演会
- Place of Presentation
  長野
- Year and Date
  2009-11-01
- Data Source
  KAKENHI-PROJECT-21360355
[Presentation] (Invited) Nanoimprint of Metallic Glasses for Optical Applications and Patterned Media2007
- Author(s)
  Y. Saotome
- Organizer
  MRS Fall Meeting, Symposium Z: Bulk Metallic Glasses
- Place of Presentation
  ボストン(アメリカ)
- Year and Date
  2007-11-27
- Data Source
  KAKENHI-PROJECT-15074216
[Presentation] (Invited) State of the art in micro forming2007
- Author(s)
  Y. Saotome
- Organizer
  Asian Workshop on Nano/Micro Forming Technology
- Place of Presentation
  札幌
- Year and Date
  2007-10-26
- Data Source
  KAKENHI-PROJECT-15074216
[Presentation] (Invited) Nanoimprint of Metallic Glasses for Micro/Nano-Devices2007
- Author(s)
  Y. Saotome
- Organizer
  Northeastern Asian Symposium on Advanced Materials 2007
- Place of Presentation
  北京(中国)
- Year and Date
  2007-12-08
- Data Source
  KAKENHI-PROJECT-15074216
[Presentation] Fabrication of Metallic Nanostructures by Nanoimprint of Metallic Glasses for Patterned Media2007
- Author(s)
  Y. Saotome
- Organizer
  Nanoprint Nanoimprint 2007 Conference (NNT 2007)
- Place of Presentation
  パリ(フランス)
- Year and Date
  2007-10-11
- Data Source
  KAKENHI-PROJECT-15074216
[Presentation] Supeiplastic Microforming of Zr-based Metallic Glass at HighStrain Rate under Rapid Heating2007
- Author(s)
  Y. Saotome
- Organizer
  14th Int. Symposium on Metastable and Nano Materials
- Place of Presentation
  コルフ(ギリシャ)
- Year and Date
  2007-08-28
- Data Source
  KAKENHI-PROJECT-15074216
[Presentation] Mass-Production of Nano-Dies by Nanoimprint of Metallic Glasses
- Author(s)
  (Y.Saotome),Y.Fukuda, K.Amiya, W.Zhang
- Organizer
  The 3rd Asian Symposium on Materials & Processing
- Place of Presentation
  Chennai, India
- Invited
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Development of a Micro Geared Motor with f f 0.9 mm Outer Diameter
- Author(s)
  (Y.Saotome), N.Toghashi, Y.Shimizu, A.Inoue
- Organizer
  10th Int. Conf. on Multi-Material Micro Manufacture
- Place of Presentation
  Vienna, Austria
- Invited
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] Superplastic Nanoforming of Zr-based Metallic Glass at High Strain Rate under Rapid Heating
- Author(s)
  (Y.Saotome), H.Miyasaka, K.Amiya, A.Inoue
- Organizer
  5thAsian Workshop on Micro/Nano Forming Technology
- Place of Presentation
  Harbin, China
- Invited
- Data Source
  KAKENHI-PROJECT-23656448
[Presentation] High Throughput Nanoimprinting of Glassy Alloys
- Author(s)
  (Y.Saotome), H.Miyasaka, K.Amiya, A.Inoue
- Organizer
  38th Int. Conf. on Micro and Nano Engineering
- Place of Presentation
  Toulouse, France
- Invited
- Data Source
  KAKENHI-PROJECT-23656448

1. AMIYA Kenji (30463798)

# of Collaborated Projects: 2 results

# of Collaborated Products: 13 results
2. HATA Seiichi (50293056)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. SAKURAI Junpei (40345385)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. Yamasaki Tohru (30137252)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
5. 河村能人 (30250814)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 安仁屋勝 (30221724)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. 山崎倫昭 (50343885)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 足立大樹 (00335192)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 藤田和孝 (10156862)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 三浦永理 (70315258)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
11. 三浦博巳

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

saotome yasunori 早乙女 康典

早乙女 康典 サオトメ ヤスノリ

SAOTOME Yasunori 早乙女 康典

YASUNORI Saotome 早乙 女康典

Research Projects

Research Products

Co-Researchers

Development of high strength nanocrystalline alloys with high ductility controlled by dynamic structural changes during plastic deformation

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Measurement of structural changes in metallic glass under super rapid heating and the applicationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Micro/Nanoformability and properties of metallic materials for MEMSPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Combinatorial Search and Nanoprocessing of Pt-free Amorphous Alloys for Glass Molding Die

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

金属ガラスの過冷却液体の変形・粘性と成型加工プロセス

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

アモルファス合金の超急速加熱制御・ナノ3次元形状転写加工法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

加工組立型産業地域でのゼロエミッションのためのデータベース構築Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

マイクロマシン創製用超塑性材料のナノ成形加工特性に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

箔のマイクロ成形加工における多結晶塑性力学特性Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Book] 金属ガラスの基礎と産業への応用2009

Author(s)

Total Pages

Publisher

Data Source

[Journal Article] Fabrication of nanodot array mold with 2 Tdot/in.2 for nanoimprint using metallic glass2012

Author(s)

Journal Title

Data Source

[Journal Article] Influence of substrate temperature on structure and adhesion strength of Fe-Cr-P-C amorphous coating films produced by thermal spraying technique2012

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Fabrication of Molds with 25-nm Dot-Pitch Pattern by Focused Ion Beam and Reactive Ion Etching for Nanoimprint Using Metallic Glass2012

Author(s)

Journal Title

DOI

ISSN

Data Source

saotome yasunori 早乙女康典

早乙女康典サオトメヤスノリ

SAOTOME Yasunori 早乙女康典

YASUNORI Saotome 早乙女康典

[Journal Article] Influence of Substrate Temperature on Structure and Adhesion Strength of Fe–Cr–P–C Amorphous Coating Films Produced by Thermal Spraying Technique2012

[Journal Article] Influence of Substrate Temperature on the Structure and Cohesive/Adhesive Strength of Fe–Co–Si–B–Nb Metallic Glass Coating Films Produced by Thermal Spraying2012