TAKAKI Setsuo 高木節雄

… Alternative Names

TAKAI Setsuo 高木節雄

Less

Researcher Number	90150490
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2018 – 2019: 九州大学, 鉄鋼リサーチセンター, 学術研究員 2015 – 2017: 九州大学, 工学研究院, 教授 2012 – 2015: 九州大学, 工学(系)研究科(研究院), 教授 2011: 九州大学, 大学院・工学研究院, 教授 2008: Kyushu University, 大学院・工学研究院, 教授 … More 2007: Kyushu University, 工学研究院, 教授 2006: 九州大学, 大学院工学研究院, 教授 2000 – 2005: 九州大学, 大学院・工学研究院, 教授 2002: 九州大学, 工学研究院, 教授 1998: 九州大学, 工学研究科, 教授 1996 – 1997: Kyushu Univ. Materials Science and Engng, Prof., 工学部, 教授 1995: 九州大学, 工学部, 助教授 1991 – 1992: 九州大学, 工学部, 助教授 1988: KYUSHU UNIV. FACULTY OF ENGINEERING, 工学部, 助教授 Less
Review Section/Research Field	Principal Investigator Structural/Functional materials / Structural/Functional materials / Metal making engineering / Material processing/treatments / 金属材料(含表面処理・腐食防食) Except Principal Investigator 金属材料(含表面処理・腐食防食) / 計測・制御工学 / 金属加工(含鋳造)
Keywords	Principal Investigator メカニカルミリング / 鉄鋼材料 / 粉末冶金 / 超塑性 / Hall-Petch / mechanical milling / 微細粒 / 機械的性質 / 結晶粒径 / 相変態 … More / 結晶粒微細化 / 加工硬化 / 粒界偏析 / 構造・機能材料 / 結晶粒微細化強化 / 粒界すべり / 気孔 / 密度 / マルテンサイト / チタン合金 / 置換型元素 / 侵入型元素 / 時効処理 / 摩擦力 / 臨界粒界応力 / 降伏強度 / 強化機構 / 合金元素 / Hall-Petchの関係 / 降伏応力 / フェライト鋼 / mechanical property / dislocation density / ultrafine Brained steel / Bailey-Hirchの関係 / Hall-Petch則 / 熱間押出 / 転位密度 / 超細粒 / toughness / grain size / carbide / martensitic stainless steel / partial solution treatment / オーステナイト粒径 / 未固溶炭化物 / 靭性 / 粒径 / 炭化物 / マルテンサイト系ステンレス鋼 / 部分溶体化処理 / oxide dispersion steel / powder metallurgy / ultra fine-grained structure / 鉄 / 超微細粒組織 / メカニカルミリング法 / 酸化物分散鋼 / 超微細粒 / Superplasticity / Forging / Pore / Density / Mechanical property / Structure control / Titanium alloy / Powder metallurgy / 粉末治金 / 焼結鍛造 / 組織制御 / Grain size / Phase transformation / Martensite / Manganese steel / Toughness / Strength / Non-magnetism / 加工誘起変態 / 高強度鋼 / マンガン鋼 / 靱性 / 強度 / 非磁性 / POWDER / GRAIN REFINING / WORK HARDENING / TWO-PHASE STAINLESS STEEL / TRANSFORMATION / MECHANICAL MILLING / 固化成形 / 内部酸化 / メカニカルシリング / 粉末 / 2相ステンレス鋼 / 変態 / 固相窒素吸収処理 / 加工誘起マルテンサイト変態 / 耐水素脆化特性 / 水素脆性 / ナノ構造 / 高強度・高延性 / ハイブリッド / 銅 / 粒子分散強化 / 鉄鋼 / 超微細結晶粒 / オーステナイト鋼 / 粒成長 / 第二相 / 焼結 / 逆変態 … More Except Principal Investigator 加工誘起変態 / 逆変態 / マルテンサイト / Reversion / Martensite / Deformation Induced Transformation / Austenitic Stainless Steel / High Strength / Ultrafine Grain / プレス成形性 / オーステナイト系ステンレス鋼 / 高強度 / 超微細結晶粒 / magnetic anisotropy probe / carburization / steel shaft / figure of eight coil / magnetic head / hysteresis / magnetoelastic effect / torque sensor / 平面コイル / 磁気ひずみ / 磁気異方性イメージング / 浸炭焼き入れ軸 / 鋼軸 / 直交8の字コイル / 磁気ヘッド / ヒステリシス / 磁気ひずみ効果 / トルクセンサ / メカニカルミリング / 準安定オ-ステナイト / 結晶粒微細化 / アルミナ / メカニカルシリング / 加工誘記変態 / 粉末 / 準安定オーステナイト Less

Systematization of academic background in grain refinement strengthening of steelPrincipal Investigator
- Principal Investigator
  
  Setsuo Takaki
- Project Period (FY)
  2015 – 2019
- Research Category
  
  Grant-in-Aid for Scientific Research (S)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Fabrication of partially stabilized austenitic steel with high strength and performance against hydrogen embrittlementPrincipal Investigator
- Principal Investigator
  
  Takaki Setsuo
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Prevention of hydrogen embrittlement by the formation of reversed austenite layer in high strength stainless steelPrincipal Investigator
- Principal Investigator
  
  TAKAKI setsuo
- Project Period (FY)
  2012 – 2013
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Re-examination of alloy designing for grain refinement strengthening in iron and steelPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Proposal of Hybrid Steel strengthen by multiple-precipitation of carbide and nano Cu particlesPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
Property Evaluation and Application of Ultrafine Grained SteelPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  2003 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  KYUSHU UNIVERSITY
Production of High Toughness Martensitic Stainless Steel using Partial Solution TreatmentPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Metal making engineering
- Research Institution
  Kyushu University
Fabrication of Ultra Fine-grained Steel from Mechanically Milled Iron Powder and Evaluation of Its PropertiesPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Kyushu University
超微細粒オーステナイト鋼における超塑性現象Principal Investigator
- Principal Investigator
  
  高木節雄
- Project Period (FY)
  1998
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas (A)
- Research Institution
  Kyushu University
超塑性変形を利用した焼結チタン合金の緻密化Principal Investigator
- Principal Investigator
  
  高木節雄
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  Kyushu University
Structure control and densification of sintered titanium alloysPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYUSHU UNIVERSITY
Design consideration on the torque sensor for intelligent mechanical systems
- Principal Investigator
  
  SASADA Ichiro
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  計測・制御工学
- Research Institution
  KYUSHU UNIVERSITY
Development of High Strength Non-Magnetic Steels for Concrete ApplicationsPrincipal Investigator
- Principal Investigator
  
  TAKAKI Setsuo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  KYUSHU UNIVERSITY
強加工したγステンレス鋼粉における加工誘起マルテンサイトの逆変態と焼結挙動
- Principal Investigator
  
  TOKUNAGA Youichi
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Kyushu University
TWO-PHASE STAINLESS STEEL PRODUCED FROM MECHANICALLY MILLED METALLIC POWDER MIXTUREPrincipal Investigator
- Principal Investigator
  
  TAKAI Setsuo
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  KYUSHU UNIVERSITY
PRODUCTION OF THE HIGH STRENGTH AUSTENITIC STAINLESS STEEL SHEET HAVING ULTRAFINE GRAIN
- Principal Investigator
  
  TOKUNAGA Youichi
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  KYUSHU UNIVERSITY

[Journal Article] Effect of dislocation distribution on the yield stress in ferritic steel under identical dislocation density conditions2020
- Author(s)
  Y.Tanaka, T.Masumura, T.Tsuchiyama and S.Takaki
- Journal Title
  
  Scripta Materialia
  
  Volume: 177 Pages: 176-180
- DOI
  10.1016/j.scriptamat.2019.10.018
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768, KAKENHI-PROJECT-17H01333
[Journal Article] 単結晶鉄におけるヤング率と弾性スティフネス2020
- Author(s)
  高木節雄, 増村拓朗, 土山聡宏
- Journal Title
  
  鉄と鋼
  
  Volume: 106
- NAID
  130007892963
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Empirical interatomic potential for Fe-N binary system based on Finnis-Sinclair potential2020
- Author(s)
  K.Hyodo, S.Munetoh, T.Tsuchiyama and S.Takaki
- Journal Title
  
  Computational Materials Science
  
  Volume: 174 Pages: 109500-109500
- DOI
  10.1016/j.commatsci.2019.109500
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768, KAKENHI-PROJECT-19J20306
[Journal Article] Dislocation Characterization by the Direct-fitting/modified Williamson-Hall (DF/mWH) Method in Ultra-low Carbon Martensitic Steel2020
- Author(s)
  増村拓朗, 高木節雄, 土山聡宏
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 106 Issue: 3 Pages: 183-186
- DOI
  10.2355/tetsutohagane.TETSU-2019-053
- NAID
  130007803601
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling2020
- Author(s)
  F.Jiang, S.Takaki, T.Masumura, R.Uemori, H.Zhang and T.Tsuchiyama
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 129 Pages: 102700-102700
- DOI
  10.1016/j.ijplas.2020.102700
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Modified Williamson-Hall法における解析精度向上手法の提案2020
- Author(s)
  高木節雄, 増村拓朗, 土山聡宏
- Journal Title
  
  材料
  
  Volume: 69
- NAID
  130007906064
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] 理想多結晶金属における弾性定数2020
- Author(s)
  高木節雄, 増村拓朗, 土山聡宏
- Journal Title
  
  材料
  
  Volume: 69
- NAID
  130007906055
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Modified Williamson-Hall法での解析に必要なパラメーターCh00ならびにqの提案2020
- Author(s)
  増村拓朗, 高木節雄, 土山聡宏
- Journal Title
  
  材料
  
  Volume: 69
- NAID
  130007833300
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] A new diffraction line profile breadth analysis approach for evaluating plastic lattice strain anisotropy in cold-worked nickel under various strain paths2019
- Author(s)
  Jiang Fulin、Masumura Takuro、Hirata Kentaro、Tsuchiyama Toshihiro、Takaki Setsuo
- Journal Title
  
  International Journal of Plasticity
  
  Volume: 112 Pages: 89-107
- DOI
  10.1016/j.ijplas.2018.08.006
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Estimation of Young’s Modulus in Poly-Crystalline Metals Based on the Direct Averaging Method2019
- Author(s)
  高木節雄, 増村拓朗, 土山聡宏
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 68 Issue: 12 Pages: 917-922
- DOI
  10.2472/jsms.68.917
- NAID
  130007769387
- ISSN
  0514-5163, 1880-7488
- Year and Date
  2019-12-15
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of grain boundary segregation of carbon on critical grain boundary strength of ferritic steel2019
- Author(s)
  S.Araki, K.Mashima, T.Masumura, T.Tsuchiyama, S.Takaki, T.Ohmura
- Journal Title
  
  Scripta Materialia
  
  Volume: 169 Pages: 38-41
- DOI
  10.1016/j.scriptamat.2019.05.001
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768, KAKENHI-PROJECT-16H06366
[Journal Article] Dislocation Characterization by the Direct-fitting/modified Williamson–Hall (DF/mWH) Method in Cold Worked Ferritic Steel2019
- Author(s)
  Takaki Setsuo、Masumura Takuro、Tsuchiyama Toshihiro
- Journal Title
  
  ISIJ International
  
  Volume: 59 Issue: 3 Pages: 567-572
- DOI
  10.2355/isijinternational.ISIJINT-2018-623
- NAID
  130007616378
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2019-03-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Estimation of Elastic Stiffness Ratio c12/c44 and Anisotropy Parameter Ai in the Steels with Bcc Structure2019
- Author(s)
 高木節雄, 増村拓朗, 土山聡宏
- Journal Title
 
 Tetsu-to-Hagane
 
 Volume: 105 Issue: 9 Pages: 935-937
- DOI
 10.2355/tetsutohagane.TETSU-2019-009
- NAID
 130007697556
- ISSN
 0021-1575, 1883-2954
- Language
 Japanese
- Peer Reviewed / Open Access
- Data Source
 KAKENHI-PROJECT-15H05768
[Journal Article] Effect of Substitutional Element Addition on Hall-Petch Relationship in Interstitial Free Ferritic Steels2019
- Author(s)
  F.Jiang, T.Masumura, T.Tsuchiyama and S.Takaki
- Journal Title
  
  ISIJ International
  
  Volume: 59 Issue: 10 Pages: 1929-1931
- DOI
  10.2355/isijinternational.ISIJINT-2019-100
- NAID
  130007729944
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2019-10-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Correlation in the Parameters Obtained by Direct-Fitting Method and Modified Williamson-Hall Method for Cold Worked Iron2019
- Author(s)
  高木節雄, 増村拓朗, 土山聡宏
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 105 Issue: 6 Pages: 648-654
- DOI
  10.2355/tetsutohagane.TETSU-2018-167
- NAID
  130007655956
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768, KAKENHI-PROJECT-17H01333
[Journal Article] 金属の弾性異方性と回折ヤング率比の関係2018
- Author(s)
  高木節雄, 増村拓朗, Fulin Jiang, 土山聡宏
- Journal Title
  
  材料
  
  Volume: 未定
- NAID
  130007485148
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Proposal of Simplified Modified Williamson-Hall Equation2018
- Author(s)
  Takaki Setsuo、Masumura Takuro、Tsuchiyama Toshihiro
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 12 Pages: 2354-2356
- DOI
  10.2355/isijinternational.ISIJINT-2018-517
- NAID
  130007534089
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2018-12-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Correction of Elastic Anisotropy in Williamson-Hall Plots by Diffraction Young’s Modulus and Direct Fitting Method2018
- Author(s)
  S.Takaki, F.Jiang, T.Masumura and T.Tsuchiyama
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 4 Pages: 769-775
- DOI
  10.2355/isijinternational.ISIJINT-2017-642
- NAID
  130006708222
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Discussion about Procedure for Determining Parameter α in Modified Williamson-Hall Method2018
- Author(s)
  Masumura Takuro、Takaki Setsuo、Jiang Fulin、Tsuchiyama Toshihiro
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 104 Issue: 11 Pages: 717-719
- DOI
  10.2355/tetsutohagane.TETSU-2018-095
- NAID
  130007501831
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-18K14016, KAKENHI-PROJECT-15H05768
[Journal Article] Relation between Diffraction Young's Modulus Ratio and Elastic Anisotropy in Metals2018
- Author(s)
  TAKAKI Setsuo、MASUMURA Takuro、JIANG Fulin、TSUCHIYAMA Toshihiro
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 67 Issue: 9 Pages: 855-860
- DOI
  10.2472/jsms.67.860
- NAID
  130007485148
- ISSN
  0514-5163, 1880-7488
- Year and Date
  2018-09-15
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of Grain Size on the Yield Stress of Cold Worked Iron2018
- Author(s)
  田中友基, 高木節雄, 土山聡宏, 植森龍治
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 104 Issue: 5 Pages: 284-291
- DOI
  10.2355/tetsutohagane.TETSU-2017-091
- NAID
  130006728771
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of Grain Size on the Yield Stress of Cold Worked Iron2018
- Author(s)
  Tanaka Yuki、Takaki Setsuo、Tsuchiyama Toshihiro、Uemori Ryuji
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 10 Pages: 1927-1933
- DOI
  10.2355/isijinternational.ISIJINT-2018-371
- NAID
  130007498202
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2018-10-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Evaluation of Dislocation Density in Cold Worked Low Carbon Ferritic Steel2018
- Author(s)
  Takaki Setsuo、Masumura Takuro、Jiang Fulin、Tsuchiyama Toshihiro
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 104 Issue: 11 Pages: 683-688
- DOI
  10.2355/tetsutohagane.TETSU-2018-054
- NAID
  130007501836
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of Low Temperature Aging on Hall-Petch Coefficient in Ferritic Steels Containing a Small Amount of Carbon and Nitrogen2018
- Author(s)
  Araki Satoshi、Fujii Kohei、Akama Daichi、Tsuchiyama Toshihiro、Takaki Setsuo、Ohmura Takahito、Takahashi Jun
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 10 Pages: 1920-1926
- DOI
  10.2355/isijinternational.ISIJINT-2018-130
- NAID
  130007498218
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2018-10-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effectt of instrumental correction on X-ray line profile analysis in cold rolled ferritic steel2018
- Author(s)
  S.Takaki, T.Masumura, F.Jiang and T.Tsuchiyama
- Journal Title
  
  ISIJ International
  
  Volume: 58
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of the Surface Layer Strained by Mechanical Grinding on X-ray Diffraction Analysis2018
- Author(s)
  F.Jiang, K.Hirata, T.Masumura, T.Tsuchiyama and S.Takaki
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 2 Pages: 376-378
- DOI
  10.2355/isijinternational.ISIJINT-2017-578
- NAID
  130006362663
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] 回折ヤング率によるWilliamson-Hallプロットの補正2018
- Author(s)
  高木節雄, 赤間大地, Jiang Fulin, 土山聡宏
- Journal Title
  
  材料
  
  Volume: 67 Pages: 383-388
- NAID
  130006515957
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of Instrumental Correction on X-ray Line Profile Analysis in Cold Rolled Ferritic Steel2018
- Author(s)
  Takaki Setsuo、Masumura Takuro、Jiang Fulin、Tsuchiyama Toshihiro
- Journal Title
  
  ISIJ International
  
  Volume: 58 Issue: 6 Pages: 1181-1183
- DOI
  10.2355/isijinternational.ISIJINT-2018-021
- NAID
  130007397758
- ISSN
  0915-1559, 1347-5460
- Year and Date
  2018-06-15
- Language
  English
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Theoretical Discussion of Dislocation Strengthening in Cold Rolled Iron2018
- Author(s)
  高木節雄, 土山聡宏
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 104 Issue: 2 Pages: 117-120
- DOI
  10.2355/tetsutohagane.TETSU-2017-053
- NAID
  130006325933
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] 微量炭素・窒素を添加したフェライト鋼のHall-Petch係数に及ぼす低温時効処理の影響2017
- Author(s)
  荒木理　藤井浩平　赤間大地　土山聡宏　高木節雄　大村孝仁　高橋淳
- Journal Title
  
  鉄と鋼
  
  Volume: 103
- NAID
  130005874186
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Quantitative Evaluation of Auto-Tempering During Quenching2017
- Author(s)
  高木節雄，赤間大地，土山聡宏
- Journal Title
  
  NETSUSHORI
  
  Volume: 56 Issue: 6 Pages: 340-344
- DOI
  10.14940/netsushori.56.340
- NAID
  130005289413
- ISSN
  0288-0490, 2188-4064
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of Low Temperature Aging on Hall-Petch Coefficient in Ferritic Steels Containing a Small Amount of Carbon and Nitrogen2017
- Author(s)
  荒木理, 藤井浩平, 赤間大地, 土山聡宏, 高木節雄, 大村孝仁, 高橋淳
- Journal Title
  
  Tetsu-to-Hagane
  
  Volume: 103 Issue: 8 Pages: 491-497
- DOI
  10.2355/tetsutohagane.TETSU-2017-008
- NAID
  130005874186
- ISSN
  0021-1575, 1883-2954
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768, KAKENHI-PROJECT-16H06366, KAKENHI-PROJECT-15H04149
[Journal Article] X線回折法を用いた純鉄加工材の転位密度評価2017
- Author(s)
  赤間大地, 土山聡宏, 高木節雄
- Journal Title
  
  材料
  
  Volume: 66 Pages: 522-527
- NAID
  130005815101
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Hydrogen-induced increase in phase stability in metastable austenite of various grain sizes under strain2017
- Author(s)
  Arnaud MACADRE, Toshihiro TSUCHIYAMA, Setsuo TAKAKI
- Journal Title
  
  Journal of Materials Science
  
  Volume: 52 Issue: 6 Pages: 3419-3428
- DOI
  10.1007/s10853-016-0630-0
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768, KAKENHI-PROJECT-16K17981
[Journal Article] Change in Dislocation Characteristics with Cold Working in Ultralow-carbon Martensitic Steel2016
- Author(s)
  Daichi AKAMA, Toshihiro TSUCHIYAMA, Setsuo TAKAKI
- Journal Title
  
  ISIJ International
  
  Volume: 56 Issue: 9 Pages: 1675-1680
- DOI
  10.2355/isijinternational.ISIJINT-2016-140
- NAID
  130005264625
- ISSN
  0915-1559, 1347-5460
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] 透過EBSD法を用いた鉄の加工組織の解析2016
- Author(s)
  田中友基，土山聡宏，高木節雄
- Journal Title
  
  熱処理
  
  Volume: 56 Pages: 327-328
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effect of pre-deformation temperature on yield strength of IF-steel2016
- Author(s)
  Yuki TANAKA, Nobuo NAKADA, Toshihiro TSUCHIYAMA, and Setsuo TAKAKI
- Journal Title
  
  The Ninth Pacific Rim International Conference on Advanced Materials and Processing(PRICM9)
  
  Volume: -
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Critical grain size to limit the hydrogen-induced ductility drop in a metastable austenitic steel2015
- Author(s)
  Macadre, A., Nakada, N., Tsuchiyama, T. and Takaki, S.
- Journal Title
  
  International Journal of Hydrogen Energy
  
  Volume: 40 Issue: 33 Pages: 10697-10703
- DOI
  10.1016/j.ijhydene.2015.06.111
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Journal Article] Difference in martensitic transformation behavior between carbon- and nitrogen-added metastable asutenitic stainless steels2015
- Author(s)
  Masumura, T., Nakada, N., Tsuchiyama, T., Takaki, S., Koyano, T., Adachi, K.
- Journal Title
  
  Proceeding of PTM2015
  
  Volume: 1 Pages: 591-592
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Journal Article] Effect of grain size and solute hydrogen on the tensile properties and fracture behaviour of an austenitic steel2015
- Author(s)
  Macadre, A., Nakada, N., Tsuchiyama, T. and Takaki, S.
- Journal Title
  
  Proceeding of Asia Steel International Conference 2015
  
  Volume: 1 Pages: 542-543
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Difference in age hardening behavior between carbon and nitrogen bearing ferritic steels2015
- Author(s)
  Araki, S., Akama, D., Tsuchiyama, T. and Takaki, S.
- Journal Title
  
  Proceeding of Asia Steel International Conference 2015
  
  Volume: 1 Pages: 226-227
- Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Journal Article] Effects of carbon and nitrogen additions on mechanical stability of metastable austenitic stainless steel2015
- Author(s)
  Masumura, T.,Fujino, K., Nakada, N., Tsuchiyama, T., Takaki, S., Adachi, K.
- Journal Title
  
  Proceeding of Asia Steel International Conference 2015
  
  Volume: 1 Pages: 96-97
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Journal Article] Effect of grain size and solute hydrogen on the tensile properties and fracture behaviour of an austenitic steel2015
- Author(s)
  Macadre, A., Nakada, N., Tsuchiyama, T. and Takaki, S.
- Journal Title
  
  Proceeding of Asia Steel International Conference 2015
  
  Volume: 1 Pages: 542-543
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Journal Article] Thermodynamics and Kinetics of Solution Nitriding2014
- Author(s)
  N. Nakada, K.Tsuboi, T.Onomoto, T.Tsuchiyama, S.Takaki, G.Inden
- Journal Title
  
  CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry
  
  Volume: 47 Pages: 168-173
- DOI
  10.1016/j.calphad.2014.09.006
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24560852, KAKENHI-PROJECT-26630352
[Journal Article] Effect of Grain Boundary Segregation of Interstitial Elements on HallPetch Coefficient in Steels2014
- Author(s)
  Setsuo Takaki
- Journal Title
  
  Materials Transactions
  
  Volume: 55 Pages: 28-34
- NAID
  130004825136
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360310
[Journal Article] Suppression of Hydrogen Embrittlement by Formation of Stable Austenite-Layer in Metastable Austenitic Stainless Steel2014
- Author(s)
  Tsuchiyama, T., Tsuboi, K., Iwanaga, S., Masumura, T., Macadre, A., Nakada, N. and Takaki, S.
- Journal Title
  
  Scripta Materialia
  
  Volume: 90-91 Pages: 14-16
- DOI
  10.1016/j.scriptamat.2014.07.005
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26630352
[Journal Article] Discontinuous yielding induced by the addition of nickel to interstitial-free steel2014
- Author(s)
  D. Akama, N. Nakada, T. Tsuchiyama, S. Takaki, A. Hironaka
- Journal Title
  
  Scripta Materialia
  
  Volume: 82 Pages: 13-16
- Data Source
  KAKENHI-PROJECT-23360310
[Journal Article] Effect of Grain Boundary Segregation of Interstitial Elements on Hall-Petch Coefficient in Steels2014
- Author(s)
  S. Takaki, D. Akama, N. Nakada, T. Tsuchiyama
- Journal Title
  
  Materials Trans
  
  Volume: 55 Pages: 28-34
- NAID
  130004825136
- Data Source
  KAKENHI-PROJECT-23360310
[Journal Article] Effect of Grain Size on Thermal and Mechanical Stability of Austenite in Metastable Austenitic Stainless Steel2013
- Author(s)
  Yoshikazu MATSUOKA, Tatsuya IWASAKI, Nobuo NAKADA, Toshihiro TSUCHIYAMA and Setsuo TAKAKI
- Journal Title
  
  ISIJ International
  
  Volume: vol.53 Pages: 1224-1230
- NAID
  130003366208
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24656415
[Journal Article] Quantitative analysis of grain boundaries in carbon- and nitrogen-added ferritic steels by atom probe tomography2012
- Author(s)
  J. Takahashi, K. Kawakami, K. Ushioda, S. Takaki, N. Nakada and T. Tsuchiyama
- Journal Title
  
  Scripta Materialia
  
  Volume: 66 Pages: 207-210
- Data Source
  KAKENHI-PROJECT-23360310
[Journal Article] Fe-Cu合金の冷間圧延に伴う分散Cu粒子の塑性変形と転位組織発達2008
- Author(s)
  今浪祐太, 村上真宏, 中田伸生, 土山聡宏, 高木節雄
- Journal Title
  
  熱処理 48
  
  Pages: 299-300
- NAID
  10024407315
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Journal Article] Microstructure and Mechanical Property of Copper Bearing Eutectoid Steel2008
- Author(s)
  M. Murakami, Y. Takanaga, N. Nakada, T. Tsuchiyama, Setsuo Takaki
- Journal Title
  
  ISIJ International 48
  
  Pages: 1467-1472
- NAID
  10027031369
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Journal Article] Microstructure and Mechanical Property of Copper Bearing Eutectoid Steel2008
- Author(s)
  M. Murakami, Y. Takanaga, N. Nakada, T. Tsuchiyama and S. Takaki
- Journal Title
  
  ISIJ International vol.48
  
  Pages: 1467-1472
- NAID
  10027031369
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Journal Article] Fe-Cu 合金の冷間圧延に伴う分散Cu 粒子の塑性変形と転位組織発達2008
- Author(s)
  今浪祐太、村上真宏、中田伸生、土山聡宏、高木節雄
- Journal Title
  
  熱処理 48 巻
  
  Pages: 299-300
- NAID
  10024407315
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Journal Article] Deformation Behavior of Ultrafine Grained Iron2005
- Author(s)
  S.TAKAKI, K.KAWASAKI, Y.FUTAMURA, T.TSUCHIYAMA
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 317-322
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Mechanical Properties of Ultra Fine Grained Iron and Steel2005
- Author(s)
  Setsuo Takaki
- Journal Title
  
  Proceedings of Joint Conference of HSLA Steels 2005 and ISUGS 2005
  
  Pages: 39-43
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Phase Stabilization by Ultra Grain Refinement in Metastable Austenite2005
- Author(s)
  S.Takaki, K.Fukunaga, J.Syarif, T.Tsuchiyama
- Journal Title
  
  Proceedings of Solid-Solid Phase Transformations in Inorganic Materials 2005 2
  
  Pages: 259-266
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Deformation Behavior of Ultrafine Grained Iron2005
- Author(s)
  S.Takaki, K.Kawasaki, Y.Futamura, T.Tsuchiyama
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 317-322
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Limit of dislocation strengthening in Iron Alloy2005
- Author(s)
  K.NAKASHIMA, M.SUZUKI, Y.FUTAMURA, T.TSUCHIYAMA, S.TAKAKI
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 627-632
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2005
- Author(s)
  S.TAKAKI, K.KAWASAKI, Y.FUTAMURA, T.TSUCHIYAMA
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 317-322
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2005
- Author(s)
  S.Ohsaki, K.Hono, H.Hidaka, S.Takaki
- Journal Title
  
  Scripta Materialia 52
  
  Pages: 271-276
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Characterization of nanocrystalline ferrite produced by mechanical milling of pearlitic steel2005
- Author(s)
  S.Ohsaki, K.Hono, H.Hidaka, S.Takaki
- Journal Title
  
  Scripta Materialia 52
  
  Pages: 271-276
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2004
- Author(s)
  S.Takaki, T.Tsuchiyama, K.Nakashima, H.Hidaka, K.Kawasaki, Y.Futamura
- Journal Title
  
  Metals and Materials International 10
  
  Pages: 533-539
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Microstructural Development of Steel during Severe Plastic Deformation2004
- Author(s)
  S.Takaki, T.Tsuchiyama, K.Nakashima, H.Hidaka, K.Kawasaki, Y.Fumamura
- Journal Title
  
  METALS AND MATERIALS International 10・6
  
  Pages: 533-539
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Effect of Grain Refinement on Thermal Stability of Metastable Austenitic Steel2004
- Author(s)
  S.Takaki, K.Fukunaga, J.Syarif, T.Tsuchiyama
- Journal Title
  
  Materials Transactions 45・7
  
  Pages: 2245-2251
- NAID
  10013337196
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Nano-Crystallization of Steel Powders with Mechanical Milling Treatment2004
- Author(s)
  H.Hidaka, T.Tsuchiyama, S.Takaki
- Journal Title
  
  Transactions of the Materials Research Society of Japan
  
  Pages: 3489-3494
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Effect of Initial Microstructure on Superplasticity in Ultrafine Grained 18Cr-9Ni Stainless Steel2004
- Author(s)
  T.Tsuchiyama, Y.Nakamura, H.Hidaka, S.Takaki
- Journal Title
  
  Materials Transactions 45・7
  
  Pages: 2259-2263
- NAID
  10013337246
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Effect of Initial Microstructure on Superplasticity in Ultrafine Grained 18Cr-9Ni Stainless Steel2004
- Author(s)
  T.Tsuchiyama, Y.Nakamura, H.Hidaka, S.Takaki
- Journal Title
  
  Materials Transactions 45
  
  Pages: 2259-2263
- NAID
  10013337246
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Effect of Grain Size on Microstructure Development During Deformation in Polycrystalline Iron2004
- Author(s)
  K.Kawasaki, H.Hidaka, T.Tsuchiyama, S.Takaki
- Journal Title
  
  Proc.2nd International Conference on Nanomaterials by Severe Plastic Deformation
  
  Pages: 345-350
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2004
- Author(s)
  T.Tsuchiyama, Y.Nakamura, H.Hidaka, S.Takaki
- Journal Title
  
  Materials Transactions 45
  
  Pages: 2259-2263
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Microstructure Development f Steel during Severe Plastic Deformation2004
- Author(s)
  S.Takaki, T.Tsuchiyama K.Nakashima, H.Hidaka, K.Kawasaki, Y.Futamura
- Journal Title
  
  Metals and Materials International 10
  
  Pages: 533-539
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2004
- Author(s)
  Setsuo Takaki, Kazuhiro Fukunaga, Junaidi Syarif, Toshihiro Tsuchiyama
- Journal Title
  
  Materials Transactions 45
  
  Pages: 2245-2251
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Effect of Grain Refinement on Thermal Stability of Metastable Austenitic Steel2004
- Author(s)
  Setsuo Takaki, Kazuhiro Fukunaga, Junaidi Syarif, Toshihiro Tsuchiyama
- Journal Title
  
  Materials Transactions 45
  
  Pages: 2245-2251
- NAID
  10013337196
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] High-resolution TEM Analysis of Defect Structures in Mechanically Milled Nanocrystalline Fe2003
- Author(s)
  M.Murayama, J.M.Howe, H.Hidaka, S.Takaki
- Journal Title
  
  ISIJ International 43
  
  Pages: 755-760
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2003
- Author(s)
  H.Hidaka, T.Tsuchiyama, S.Takaki
- Journal Title
  
  Materials Science Forum 426-432
  
  Pages: 2717-2722
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Microstructural Change during Mechanical Millling Treatment in Fe-C Alloy Powders with Different Initial Microstructure2003
- Author(s)
  H.Hidaka, T.Tsuchiyama, S.Takaki
- Journal Title
  
  Materials Science Forum 426-432
  
  Pages: 2717-2722
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Effect of Carbon on Nano-Crystallization in Steel during Mechanical Milling Treatment2003
- Author(s)
  H.Hidaka, T.Tsuchiyama, S.Takaki
- Journal Title
  
  Materials transactions 44
  
  Pages: 1912-1918
- NAID
  10011915185
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Limit of Dislocation Density and Ultra-Grain-Refining on Severs Deformation in Iron2003
- Author(s)
  S.Takaki
- Journal Title
  
  Materials Science Forum 426-432
  
  Pages: 215-222
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2003
- Author(s)
  H.Hidaka, T.Tsuchiyama, S.Takaki
- Journal Title
  
  Materials transactions 44
  
  Pages: 1912-1918
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] 「研究成果報告書概要(欧文)」より2003
- Author(s)
  S.Takaki
- Journal Title
  
  Materials Science Forum 426-432
  
  Pages: 215-222
- Data Source
  KAKENHI-PROJECT-15206077
[Journal Article] Contribution of Soft Cu Particles on Tensile Deformation Behavior in Iron
- Author(s)
  Y. Imanami, M. Murakami, N. Nakada, T. Tsuchiyama and S. Takaki
- Journal Title
  
  special issue of Netsusyori (掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Journal Article] Precipitation of Copper Particles during Pearlite Transformation
- Author(s)
  M. Murakami, Y. Takanaga, N. Nakada, T. Tsuchiyama and S. Takaki
- Journal Title
  
  special issue of Netsusyori 掲載決定
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Journal Article] Contribution of Soft Cu particles on Work Hardening Behavior in Ferritic iron
- Author(s)
  Y. Imanami, M. Murakami, N. Nakada, T. Tsuchiyama and S. Takaki
- Journal Title
  
  ISIJ International 掲載決定
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Estimation of the Parameter A in Modified Williamson-Hall Equation for Martensitic Steel2019
- Author(s)
  Takuro Masumura, Setsuo Takaki, Toshihiro Tsuchiyama
- Organizer
  MSMF9
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Direct-fitting/modified Williamson-Hall(DF/mWH)法を用いた各種鉄鋼材料の転位密度評価法2019
- Author(s)
  増村拓朗、高木節雄、土山聡宏
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Evaluation of Pinning Force on Edge Dislocation due to C and N Atoms in Iron by Molecular Dynamics Simulation2019
- Author(s)
  Katsutoshi Hyodo, Shinji Munetoh, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  MSMF9
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 分子動力学法によるBCC鉄中での刃状転位と炭素原子の相互作用の評価2019
- Author(s)
  大岩根駿、兵頭克敏、宗藤伸治、土山聡宏、高木節雄
- Organizer
  2019年度合同学術講演会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 分子動力学法によるBCC鉄非対称傾角粒界での転位パイルアップシミュレーション2019
- Author(s)
  兵頭克敏　宗藤伸治　土山聡宏　高木節雄
- Organizer
  日本鉄鋼協会第177回春季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Evaluation of Hall-Petch Coefficient with Critical Grain Boundary Shear Stress Measured by Nanoindentation in Ferritic Steel2019
- Author(s)
  Toshihiro Tsuchiyama, Katsuya Mashima, Satoshi Araki, Setsuo Takaki, Takahito Ohmura
- Organizer
  MSMF9
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] FSポテンシャルに基づいたFe-N２元系ポテンシャル2019
- Author(s)
  兵頭克敏、宗藤伸治、土山聡宏、高木節雄
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 高窒素オーステナイト鋼における加工硬化と転位蓄積挙動2019
- Author(s)
  増村拓朗　瀨戸雄樹　土山聡宏　高木節雄　木村謙
- Organizer
  日本鉄鋼協会第177回春季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 分子動力学法を用いたBCC鉄中での炭素原子による刃状転位のピン止め力の評価2019
- Author(s)
  大岩根駿、兵頭克敏、宗藤伸治、土山聡宏、高木節雄
- Organizer
  日本鉄鋼協会第178回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Analysis of interaction between C/N atom and moving edge dislocation in iron by Molecular Dynamics2018
- Author(s)
  Katsutoshi Hyodo, Satoshi Araki, Shinji Munetoh, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  THERMEC'2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Direct Fitting法を用いたオーステナイト鋼の転位密度および加工硬化挙動の評価2018
- Author(s)
  増村拓朗　高木節雄　土山聡宏
- Organizer
  日本鉄鋼協会第176回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 分子動力学法を用いたFCC 鉄中での窒素-刃状転位間相互作用の解析2018
- Author(s)
  兵頭克敏　永山享平　宗藤伸治　土山聡宏　高木節雄
- Organizer
  日本鉄鋼協会第176回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Discussion on Hall-Petch coefficient of ferritic steel based on experimentally measured critical grain boundary shear stress2018
- Author(s)
  Toshihiro Tsuchiyama, Katsuya Mashima, Satoshi Araki, Setsuo Takaki, Takahito Ohmura
- Organizer
  ICAS2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Evaluation of work hardening behavior in austenitic steel by direct fitting / modified Williamson-Hall method2018
- Author(s)
  Takuro Masumura, Fulin Jiang, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  THERMEC'2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Direct fitting / modified Williamson-Hall法による転位解析2018
- Author(s)
  高木節雄　増村拓朗　土山聡宏
- Organizer
  日本鉄鋼協会第176回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of carbon and grain size on the yield stress of cold worked ferritic steels2018
- Author(s)
  Setsuo Takaki
- Organizer
  CAMS2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Direct fitting/Modified Williamson-Hall法によるフェライト鋼の転位密度評価2018
- Author(s)
  高木節雄　増村拓朗　Fulin Jiang　土山聡宏
- Organizer
  日本鉄鋼協会第175回春季講演大会
- Invited
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of grain size on the yielding and post-tield deformation in ferritic steel2018
- Author(s)
  Setsuo Takaki
- Organizer
  ICAS2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Pinning Force on Edge Dislocation Due to C and N Atoms in Iron Analyzed by Molecular Dynamics Simulation2018
- Author(s)
  Katsutoshi Hyodo, Satoshi Araki, Shinji Munetoh, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  ICAS2018
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of grain size on the dislocation density of cold worked ferritic steels2018
- Author(s)
  Setsuo Takaki, Yuki Tanaka, Toshihiro Tsuchiyama, Ryuji Uemori
- Organizer
  THERMEC'2018
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 微量炭素を含有するフェライト鋼の時効処理に伴う粒界強度の変化2017
- Author(s)
  真島克弥、荒木理、土山聡宏, 高木節雄、大村孝仁
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 回折ヤング率によるWilliamson-Hall plotsの補正ならびにDirect fitting法の提案2017
- Author(s)
  高木節雄
- Organizer
  日本鉄鋼協会第173回春季講演大会
- Place of Presentation
  首都大学東京南大沢キャンパス
- Year and Date
  2017-03-15
- Invited
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Correlation between grain boundary segregation and Hall-Petch coefficient in Fe-Si steels2017
- Author(s)
  F. L. Jiang, K. Hirata, T. Tsuchiyama and S. Takaki
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 回折ヤング率によるWilliamson-Hallプロットの補正方法の検討2017
- Author(s)
  高木節雄, 増村拓朗, 土山聡宏
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] IF 鋼の転位組織および降伏強度に及ぼす前加工温度の影響2017
- Author(s)
  田中友基土山聡宏高木節雄
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 焼鈍したフェライト鋼の可動転位密度と時効処理によるその変化2017
- Author(s)
  荒木理　土山聡宏　高木節雄　大村孝仁
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Direct correction of the elastic anisotropy in Williamson-Hall plots for cold worked metals2017
- Author(s)
  Fulin Jiang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama
- Organizer
  EUROMAT2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Interaction between C/N atom and edge dislocation in bcc iron analyzed by molecular dynamics simulation2017
- Author(s)
  Katsutoshi Hyodo, Satoshi Araki, Shinji Munetoh, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  ISSS2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Role of silicon addition in grain refinement strengthening of ferritic steel2017
- Author(s)
  Fulin JIANG　赤間大地　土山聡宏　高木節雄
- Organizer
  日本鉄鋼協会第173回春季講演大会
- Place of Presentation
  首都大学東京南大沢キャンパス
- Year and Date
  2017-03-15
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] フェライト鋼における転位運動に及ぼす炭素と窒素の影響の相異2017
- Author(s)
  兵頭克敏　荒木理　宗藤伸治　土山聡宏　高木節雄
- Organizer
  第83回熱処理技術協会講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Fe-3mass％Siフェライト鋼の降伏強度に及ぼす焼鈍時間の影響2017
- Author(s)
  平田健太郎　F．l．Jiang　土山聡宏　高木節雄
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Application of direct fitting method to the modified Williamson-Hall method2017
- Author(s)
  Setsuo Takaki, Fu-lin Jang, Daichi Akama, Toshihiro Tsuchiyama
- Organizer
  EUROMAT2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 分子動力学法を用いた鉄中での炭素・窒素-刃状転位間相互作用の解析2017
- Author(s)
  兵頭克敏　荒木理　宗藤伸治　土山聡宏　高木節雄
- Organizer
  平成29年度　合同学術講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of silicon on the Hall-Petch relation in ferritic iron2017
- Author(s)
  Kentaro Hirata, Fu-lin Jang, Setsuo Takaki, Daichi Akama, Toshihiro Tsuchiyama
- Organizer
  EUROMAT2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 分子動力学法を用いたBCC鉄中での炭素・窒素-刃状転位間相互作用の解析2017
- Author(s)
  兵頭克敏　荒木理　宗藤伸治土山聡宏高木節雄
- Organizer
  日本鉄鋼協会第174回秋季講演大会
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] X線ラインプロファイル解析による純鉄冷間加工材の転位キャラクター評価2016
- Author(s)
  赤間大地、土山聡宏、高木節雄
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪大学豊中キャンパス
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] フェライト鋼のHall-Petch係数におよぼす置換型元素の影響2016
- Author(s)
  赤間大地、中田伸生、土山聡宏、宗藤伸治、高木節雄、竹田健悟、藤井浩平、荒木理、藤原勝、弘中明
- Organizer
  日本鉄鋼協会第171回春季講演大会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 微量炭素を含有するフェライト鋼の時効処理に伴う粒内硬さの変化2016
- Author(s)
  真島克弥　赤間大地　土山聡宏　高木節雄
- Organizer
  平成28年度合同学術講演会大会
- Place of Presentation
  九州大学筑紫キャンパス
- Year and Date
  2016-06-11
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Mechanism on the appearance of spike-yielding in ultra-low carbon steel2016
- Author(s)
  Satoshi Araki, Daichi Akama, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  MSMF8
- Place of Presentation
  Brno university of technology
- Year and Date
  2016-06-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Solid solution strengthening by Ni in ultra-low carbon martensitic steel2016
- Author(s)
  Daichi Akama. Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  MSMF8
- Place of Presentation
  Brno university of technology
- Year and Date
  2016-06-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 鉄の結晶粒微細化強化と転位強化の関係2016
- Author(s)
  高木節雄
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪大学豊中キャンパス
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Dislocation density of cold-rolled Fe-Ni martensitic Steel measured by X-ray line profile analysis2016
- Author(s)
  Daichi Akama, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  PRICM9
- Place of Presentation
  ICC Kyoto
- Year and Date
  2016-08-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of Grain Size on the Dislocation Introduction in Iron2016
- Author(s)
  Setsuo Takaki, Yuki Tanaka, Daichi Akama, Toshihiro Tsuchiyama
- Organizer
  MSMF8
- Place of Presentation
  Brno university of technology
- Year and Date
  2016-06-27
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Evolution of plastic zone size at a crack tip with ultra-fine grains in metastable austenite2016
- Author(s)
  Arnaud Macadre, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  THERMEC' 2016
- Place of Presentation
  Messe Congress Graz
- Year and Date
  2016-05-29
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Difference in age hardening behavior between carbon and nitrogen ferritic steel2016
- Author(s)
  Satoshi Araki, Daichi Akama, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  CAMS2016
- Place of Presentation
  Swinburne University of Technology
- Year and Date
  2016-12-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 鉄の飽和転位密度の見積もり2016
- Author(s)
  高木節雄　赤間大地　土山聡宏
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪大学豊中キャンパス
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 転位セル組織を有する鉄の強化機構2016
- Author(s)
  高木節雄　赤間大地　土山聡宏
- Organizer
  日本鉄鋼協会第172回秋季講演大会
- Place of Presentation
  大阪大学豊中キャンパス
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] フェライト鋼における上降伏点の発現機構2016
- Author(s)
  荒木理、赤間大地、土山聡宏、高木節雄
- Organizer
  日本鉄鋼協会第171回春季講演大会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] The effect of dislocation characteristics on yielding behavior in ultra-low carbon Fe-Ni martensite2016
- Author(s)
  Daichi Akama, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  CAMS2016
- Place of Presentation
  Swinburne University of Technology
- Year and Date
  2016-12-06
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of Grain Size on the Dislocation Introduction in Iron2016
- Author(s)
  Setsuo Takaki
- Organizer
  8th Korea-Japan Berkeley Symposium
- Place of Presentation
  青森県弘前市
- Year and Date
  2016-07-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Yielding mechanism of polucrystalline iron2016
- Author(s)
  Setsuo Takaki
- Organizer
  CAMS2016
- Place of Presentation
  Swinburne University of Technology
- Year and Date
  2016-12-06
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 炭素・窒素を含有した準安定オーステナイト鋼における機械的安定度と変形温度の関係2016
- Author(s)
  増村拓朗、藤野昂平、土山聡宏、高木節雄、安達和彦
- Organizer
  日本鉄鋼協会第171回春季講演大会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-23
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Grain size dependence on the yielding behavior of iron2016
- Author(s)
  Setsuo Takaki
- Organizer
  THERMEC' 2016
- Place of Presentation
  Messe Congress Graz
- Year and Date
  2016-05-29
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of pre-deformation temperature on yield strength of IF-steel2016
- Author(s)
  Yuki Tanaka, Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  PRICM9
- Place of Presentation
  ICC Kyoto
- Year and Date
  2016-08-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 準安定オーステナイト系ステンレス鋼のMd30に及ぼす炭素および窒素の影響2015
- Author(s)
  藤野昂平、増村拓朗、土山聡宏、高木節雄、中田伸生、安達和彦
- Organizer
  日本鉄鋼協会第170回秋季講演大会
- Place of Presentation
  九州大学
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] 安定オーステナイト系ステンレス鋼の水素侵入挙動に及ぼす予歪の影響2015
- Author(s)
  坂巻嘉明、赤間大地、土山聡宏、高木節雄
- Organizer
  第79回日本熱処理技術協会講演大会
- Place of Presentation
  東京工業大学
- Year and Date
  2015-06-04
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] 準安定オーステナイト系ステンレス鋼の加工硬化挙動に及ぼす炭素および窒素の影響2015
- Author(s)
  増村拓朗、藤野昂平、土山聡宏、高木節雄、中田伸生、安達和彦
- Organizer
  日本鉄鋼協会第170回秋季講演大会
- Place of Presentation
  九州大学
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Effects of carbon and nitrogen additions on mechanical stability of metastable austenitic stainless steel2015
- Author(s)
  Takuro Masumura, Kohei Fujino, Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki and Kazuhiko Adachi
- Organizer
  Asia Steel 2015
- Place of Presentation
  パシフィコ横浜
- Year and Date
  2015-10-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Differnce in age hardening behavior between carbon and nitrogen bearing ferritic steels2015
- Author(s)
  Satoshi Araki, Daichi Akama, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  Asia Steel 2015
- Place of Presentation
  パシフィコ横浜
- Year and Date
  2015-10-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Evolution of fracture mode for varying grain sizes in a hydrogen-charged metastable austenitic steel2015
- Author(s)
  A. Macadre, N. Nakada, T. Tsuchiyama, S. Takaki
- Organizer
  Crack Paths 2015
- Place of Presentation
  Palazzo Tassoni
- Year and Date
  2015-09-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] 安定オーステナイト系ステンレス鋼の水素侵入挙動に及ぼす転位の影響2015
- Author(s)
  坂巻嘉明、赤間大地、土山聡宏、高木節雄
- Organizer
  日本鉄鋼協会第170回秋季講演大会
- Place of Presentation
  九州大学
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Improvement of resistance to hydrogen by ultra-grain refinement in a metastable austenitic steel2015
- Author(s)
  A. Macadre, N. Nakada, T. Tsuchiyama, S. Takaki
- Organizer
  European Congress and Exhibition on advanced materials and processes
- Place of Presentation
  Warsaw　University
- Year and Date
  2015-09-20
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Improvement of resistance to hydrogen by ultra-grain refinement in a metastable austenitic steel2015
- Author(s)
  A. Macadre, N. Nakada, T. Tsuchiyama, S. Takaki
- Organizer
  European Congress and Exhibition on advanced materials and processes (EUROMAT 2015)
- Place of Presentation
  Warsaw　University
- Year and Date
  2015-09-20
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Effect of grain size and solute hydrogen on the tensile properties and fracture behavior of an austenitic steel2015
- Author(s)
  A. Macadre, N. Nakada, T. Tsuchiyama, S. Takaki
- Organizer
  Asia Steel 2015
- Place of Presentation
  パシフィコ横浜
- Year and Date
  2015-10-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of low temperature aging on Hall-Petch relationship in interstitiallyalloyed ferritic steel2015
- Author(s)
  T. Tsuchiyama, K. Fujii, S. Araki, S. Takaki, J. Takahashi, K. Ushioda
- Organizer
  17th International Conference on the Strength of Materials
- Place of Presentation
  Brno Convention and Exhibition Centre
- Year and Date
  2015-08-09
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Difference in martensitic transformation behavior between carbon- and nitrogen-added metastable austenitic stainless steels2015
- Author(s)
  Takuro Masumura, Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki, Tamotsu Koyano and Kazuhiko Adachi
- Organizer
  International Conference on Solid-Solid Phase Transformations in Inorganic Materials (PTM 2015)
- Place of Presentation
  Westin Whistler Resort & Spa
- Year and Date
  2015-06-29
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Effect of grain size and solute hydrogen on the tensile properties and fracture behavior of an austenitic steel2015
- Author(s)
  A. Macadre, N. Nakada, T. Tsuchiyama, S. Takaki
- Organizer
  Asia Steel 2015
- Place of Presentation
  パシフィコ横浜
- Year and Date
  2015-10-05
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Effect of grain size on the work hardening of ferritic iron2015
- Author(s)
  Setsuo TAKAKI, Yuki TANAKA, Daichi AKAMA, Nobuo NAKADA, Toshihiro TSUCHIYAMA
- Organizer
  International Conference on Advanced Material
- Place of Presentation
  ICC,Jeju
- Year and Date
  2015-10-25
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] Effect of grain size on the yielding behavior of polycrystalline ferritic steel2015
- Author(s)
  Setsuo Takaki,Toshihiro Tsuchiyama, Nobuo Nakada , Daichi Akama, Yuki Tanaka
- Organizer
  Asia Steel 2015
- Place of Presentation
  パシフィコ横浜
- Year and Date
  2015-10-05
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H05768
[Presentation] 安定オーステナイト系ステンレス鋼の水素侵入挙動に及ぼす低歪速度変形の影響2014
- Author(s)
  坂巻嘉明・岩永修一・中田伸生・土山聡宏・高木節雄
- Organizer
  平成26年度合同学術講演会日本金属学会九州支部日本鉄鋼協会九州支部軽金属学会九州支部
- Place of Presentation
  九州大学
- Year and Date
  2014-06-07
- Data Source
  KAKENHI-PROJECT-26630352
[Presentation] Effect of grain size on mechanical stability of austenite in metastable austenitic stainless steel2013
- Author(s)
  Yoshikazu MATSUOKA, Nobuo NAKADA, Toshihiro TSUCHIYAMA, Setsuo TAKAKI
- Organizer
  THERMEC 2013
- Year and Date
  2013-12-04
- Data Source
  KAKENHI-PROJECT-24656415
[Presentation] 組織傾斜化による準安定オーステナイト系ステンレスSUS304 鋼板の水素脆化の抑制とその設計指針2013
- Author(s)
  岩永修一,香月裕太郎,坪井耕一,Macadre Arnaud,中田伸生,土山聡宏,高木節雄
- Organizer
  日本鉄鋼協会第166回秋季講演大会
- Year and Date
  2013-09-18
- Data Source
  KAKENHI-PROJECT-24656415
[Presentation] フェライト鋼における炭素と窒素の粒界偏析エネルギーの見積もり2012
- Author(s)
  高木節雄, 中田伸生, 土山聡宏, 高橋淳, 潮田浩作
- Organizer
  鉄鋼協会春季講演大会
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] フェライト鋼の結晶粒微細化強化における炭素と窒素の影響2012
- Author(s)
  高木節雄
- Organizer
  日本鉄鋼協会春季講演大会
- Place of Presentation
  横浜国立大学
- Year and Date
  2012-03-29
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] 炭素及び窒素添加フェライト鋼の3DAP 粒界偏析定量観察2012
- Author(s)
  高橋淳, 川上和人, 潮田浩作, 高木節雄, 中田伸生, 土山聡宏
- Organizer
  鉄鋼協会春季講演大会
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] 3DAPで求めた炭素と窒素の粒界濃度の補正2012
- Author(s)
  高木節雄
- Organizer
  日本鉄鋼協会春季講演大会
- Place of Presentation
  横浜国立大学
- Year and Date
  2012-03-28
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] Effect of Solution Carbon on Yielding Behavior of Polycrystalline Ferritic Iron2012
- Author(s)
  Setsuo Takaki
- Organizer
  IUMRS-ICA2012
- Place of Presentation
  BEXCO
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] 微量炭素・窒素を含むフェライト鋼のHall-Petch 係数に及ぼす低温時効の影響2012
- Author(s)
  藤井浩平, 赤間大地, 中田伸生, 土山聡宏, 高木節雄
- Organizer
  鉄鋼協会秋季講演大会
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] 準安定オーステナイト系ステンレス鋼の熱的・機械的安定性に及ぼす結晶粒径の影響2012
- Author(s)
  中田伸生,岩崎竜也,松岡禎和,土山聡宏,高木節雄
- Organizer
  日本鉄鋼協会第164回秋季講演大会
- Year and Date
  2012-09-19
- Data Source
  KAKENHI-PROJECT-24656415
[Presentation] Inhomogeneous Deformation-Inducced Martensitic Transformation behavior of Retained Austenite Dispersed in Martensitic Stainless Steel2012
- Author(s)
  Yoshikazu Matsuoka, Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  IUMRS-ICA2012
- Year and Date
  2012-08-28
- Data Source
  KAKENHI-PROJECT-24656415
[Presentation] Ni 含有IF 鋼における降伏点現象の発現2011
- Author(s)
  赤間大地, 中田伸生, 土山聡宏, 高木節雄, 弘中明
- Organizer
  鉄鋼協会秋季講演大会
- Year and Date
  2011-09-22
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] Influence of Chromium on the Hall-Petch Coefficient in Ferritic Stainless Steel2011
- Author(s)
  Akira Hironaka, Nobuo Nakada, Toshihiro Tsuchiyama, Setsuo Takaki
- Organizer
  THERMEC 2011 (INTERNATIONAL CONFERENCE on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS)
- Year and Date
  2011-08-04
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] フェライト系ステンレス鋼のHall-Petch 係数に及ぼすCr の影響2011
- Author(s)
  弘中明, 中田伸生, 土山聡宏, 高木節雄
- Organizer
  鉄鋼協会秋季講演大会
- Year and Date
  2011-09-22
- Data Source
  KAKENHI-PROJECT-23360310
[Presentation] 硬質および軟質粒子分散フェライト鋼における加工硬化挙動の相違2009
- Author(s)
  今浪祐太、村上真宏、中田伸生、土山聡宏、高木節雄
- Organizer
  (社)日本鉄鋼協会・春季講演大会
- Year and Date
  2009-03-29
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Contribution of Soft Cu Particles on Tensile Deformation Behavior in Iron2008
- Author(s)
  Y. Imanami, M. Murakami, N. Nakada, T. Tsuchiyama, S. Takaki
- Organizer
  17th IFHTSE Congress
- Place of Presentation
  Kobe
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Contribution of Soft Cu Particles on Tensile Deformation Behavior in Iron2008
- Author(s)
  Y. Imanami, M. Murakami, N. Nakada, T. Tsuchiyama and S. Takaki
- Organizer
  17th IFHTSE Congress
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Precipitation of Copper Particles during Pearlite Transformation2008
- Author(s)
  M. Murakami, Y. Takanaga, N. Nakada, T. Tsuchiyama and S. Takaki
- Organizer
  17th IFHTSE Congress
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Precipitation of Copper Particles during Pearlite Transformation2008
- Author(s)
  M. Murakami, Y. Takanaga, N. Nakada, T. Tsuchiyama, s. Takaki
- Organizer
  17th IFHTSE Congress
- Place of Presentation
  Kobe
- Year and Date
  2008-10-30
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] マルテンサイト鋼における硬質炭化物粒子と軟質Cu 粒子の複合析出挙動2007
- Author(s)
  村上真宏、中田伸生、土山聡宏、高木節雄、足立吉隆
- Year and Date
  2007-09-19
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] マルテンサイト鋼における硬質炭化物粒子と軟質Cu粒子の複合析出挙動2007
- Author(s)
  村上真宏、中田伸生、土山聡宏、高木節雄、足立吉隆
- Organizer
  (社)日本鉄鋼協会・第154回秋季講演大会
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-19
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Cu粒子分散型パーライト鋼の組織と強度特性2007
- Author(s)
  高永洋平、中田伸生、土山聡宏、高木節雄
- Organizer
  (社)日本鉄鋼協会・第154回秋季講演大会
- Year and Date
  2007-09-19
- Data Source
  KAKENHI-PROJECT-18360332
[Presentation] Cu粒子分散型パーライト鋼の組織と強度特性2007
- Author(s)
  高永洋平、中田伸生、土山聡宏、高木節雄
- Organizer
  (社)日本鉄鋼協会・第154回秋季講演大会
- Place of Presentation
  岐阜大学
- Year and Date
  2007-09-19
- Data Source
  KAKENHI-PROJECT-18360332

1. NAKAD Nobuo (50380580)

# of Collaborated Projects: 5 results

# of Collaborated Products: 34 results
2. TSUCHIYAMA Toshihiro (40315106)

# of Collaborated Projects: 4 results

# of Collaborated Products: 116 results
3. TOKUNAGA Youichi (60037710)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. NAKASHIMA Koichi (30363378)

# of Collaborated Projects: 2 results

# of Collaborated Products: 4 results
5. SASADA Ichiro (20117120)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. HIGASHIDA Kenji (70156561)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. MORIKAWA Tatsuya (00274506)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 鎌田政智 (00185977)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 宗藤伸治 (20380587)

# of Collaborated Projects: 1 results

# of Collaborated Products: 14 results
10. 赤間大地 (80612118)

# of Collaborated Projects: 1 results

# of Collaborated Products: 10 results
11. MIYAKUSU Katsuhisa

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. ABE Yoshio

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. TOMIMURA Kouki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. 星野和夫

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. HOSHINO Kazuo

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

TAKAKI Setsuo 高木 節雄

TAKAI Setsuo 高木 節雄

Research Projects

Research Products

Co-Researchers

Systematization of academic background in grain refinement strengthening of steelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of partially stabilized austenitic steel with high strength and performance against hydrogen embrittlementPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Prevention of hydrogen embrittlement by the formation of reversed austenite layer in high strength stainless steelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Re-examination of alloy designing for grain refinement strengthening in iron and steelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Proposal of Hybrid Steel strengthen by multiple-precipitation of carbide and nano Cu particlesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Property Evaluation and Application of Ultrafine Grained SteelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Production of High Toughness Martensitic Stainless Steel using Partial Solution TreatmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Fabrication of Ultra Fine-grained Steel from Mechanically Milled Iron Powder and Evaluation of Its PropertiesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

超微細粒オーステナイト鋼における超塑性現象Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

超塑性変形を利用した焼結チタン合金の緻密化Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Institution

Structure control and densification of sintered titanium alloysPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Design consideration on the torque sensor for intelligent mechanical systems

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of High Strength Non-Magnetic Steels for Concrete ApplicationsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

TAKAKI Setsuo 高木節雄

TAKAI Setsuo 高木節雄