NAGASAKI Chihiro 長崎千裕

Researcher Number	90180471
Affiliation *help	2016 – 2018 : 東京大学, 大学院工学系研究科(工学部), 助手 2005 – 2006 : 東京大学, 大学院・工学系研究科, 助手 2006 : 東京大学, 大学院工学系研究科, 助手 1999 : 東京大学, 大学院・工学系研究科, 助手 1988 – 1992 : 東京大学, 工学部, 助手
Review Section/Research Field	Principal Investigator Metal making engineering Except Principal Investigator 金属加工(含鋳造) / Science and Engineering
Keywords	Principal Investigator recycling of steel / 高温酸化 / steel scrap / oxidation / 鉄スクラップ / hot surface cracking / リサイクル / 鉄のリサイクル / surface hot shortness / 液相脆化 … More Except Principal Investigator Co / Mg-Ni / Deformation Mode Method / Elastic Constants / WC / Dispersion Characteristics / 界面強度評価 / 弾性定数 / 超音波スペクトロマイクロスコピ- / Interfacial Strength Evaluation / 非平衡相制御 / 動的再結晶 / アルミナ線材 / ヒーター / 非破壊定量評価 / γ→α変態 / 環境材料 / High Density Green / CVDコ-ティング / 超100°C / 複合板材 / イオンビームスパッタ法 / Coupling Analysis / 銅の中間温度脆性 / 物理修飾 / Non-equilibration / 直接シミュレ-ション / 計算モデル制御 / Hot press / 5軸制御系 / バルクメカニカルアロイング / 固相合成 / αーアルミナ / Mg合金 / 弾性特性評価 / Good Sinterability / 格子ひずみ効果 / Whisker / 複合板材成形 / X-Ray Stress Analysis / 超音波評価 / セラミック粉体 / Fine Microstructure Control / 表面波速度 / 粒界偏折 / 残留応力分布 / 水素吸蔵 / Ceramics composites / 線材圧延 / 密度分布 / 粒状体・粉体力学 / Composite Wires / 非調質低合金高強度鋼 / 高密度成形体 / 制御圧縮場 / T:N / 等方圧縮成形 / セラミックス複合材料 / Mg_2Ni / 破壊靭性 / PVD TiN Coating / 非平衡相 / 複合線材 / Melting and Casting / Fe systems / 初期密度 / ち密化 / Integrated Optimization / 水素 / Bulk Mechanical Alloying / 超音波スペクトロマイクロスコピー / Solid-State Synthesis / 化学修飾 / 金属シ-ス / コールド・コーティング / 粉体構造制御 / プロセスメタラジ- / 固相リサイクル / 熱電材料 / 溶解・鋳造プロセス / Facture toughness / ニッケル / Cold Coating / 省エネルギー / 複合線化 / αーAl_2O_3 / PVDコ-ティング / 易焼結性 / 破砕成形・加工 / セラミックス / セラミックコーティング / 連成解析 / Mg-Si系 / Mg-Si / 変形モ-ド法 / αの大量折出 / コーティング材 / X線応力測定 / 熱電特性 / Process Metallurgy / ウィスカー / Acoustic Spectro-Microscopy / 粒子系モデル / PVD / 分散曲線 / サ-メット / 逆問題解析 / DBEM / 層状材料 / 金属生産工学 / Inverse Problem / 塑性加工プロセス / Leaky Surface Wave / Mg基生体適合膜創製 / 金属-セラミック複合化 / Plastic Working / 超高温ホットプレス / Initial Density of Mass / バリアフリープロセス / 最適化 / 表面波 / 低温相 / 材料加工・処理 / Composite Layered Plates / PCT-XRD同時測定 / 超音波スペクトロスコピー / 制御破砕成形 / フィルム状フエライト / 機能材料 / Mg-Si system / 線材化 / PVD TiNコーティング / 生成エネルギー / alpha-Al_2O_3 / 分散特性 / マグネシウム / 中間温度脆性 / Solid-State Recycling / 粒界移動 / Fe系 / 緻密化 / 表面改質材 / 微構造制御 / Controlled Fracture Forming / Ceramics / 固相反応合成 / 限界加工率 / Mg-base bio-compatible film formation / 周波数分散特性 / Residual Stress Distribution / Computational Model / α-Al_2O_3 / 超音波顕微鏡 / 残留応力評価 / Coサーメット / 粒界ボイド形成 / セラミック材料 / シ-ス材料 / 炭窒化物の析出 / ウィスカ- / ホットプレス Less

Establishment of technique for improving surface quality for recycling of steels in resource-cycled societyPrincipal Investigator
- Principal Investigator
  
  NAGASAKI Chihiro
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Metal making engineering
- Research Institution
  The University of Tokyo
Solid-State Synthesis and Processing of Advanced Magnesium Alloys toward Non-traditional Functionality
- Principal Investigator
  
  AIZAWA Tatsuhiko
- Project Period (FY)
  1999 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Center for Collaborative Research, The University of Tokyo
Development of quantitative evaluation on interfacial strength for PVD coated materials.
- Principal Investigator
  
  KIHARA Junji
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (A)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  University of Tokyo
セラミック材料粉体/粒状体の流動・加工特性評価法の開発
- Principal Investigator
  
  AIZAWA Tatsuhiko
- Project Period (FY)
  1989
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Research Institution
  The University of Tokyo
High pressured processing of nano particle and whisker reinforced ceramic composites
- Principal Investigator
  
  KISHI Teruo
- Project Period (FY)
  1989 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  The University of Tokyo
Development of controlled fracture forming process for advanced functional materials
- Principal Investigator
  
  AIZAWA Tatsuhiko
- Project Period (FY)
  1989 – 1991
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research.
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  University of Tokyo
Integrated Optimization of Melting, Casting and Plastic Working for Metals and Metallic Alloys
- Principal Investigator
  
  KIHARA Junji
- Project Period (FY)
  1988 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  The University of Tokyo

All 2006 2005

All Journal Article

[Journal Article] Effects of Boron and Tin on Surface Hot Shortness due to Copper in Low Carbon Steel2006
- Author(s)
  Chihiro NAGASAKI, Kentaro ASAKURA, Toshihiko, KOSEKI, Koji Shibata
- Journal Title
  
  CAMP-ISIJ Vol.19・No.3
  
  Pages : 501-501
- Data Source
  KAKENHI-PROJECT-17560650
[Journal Article] 銅すず含有鋼の表面赤熱脆性に及ぼすボロン添加の効果2005
- Author(s)
  長崎千裕
- Journal Title
  
  第56回塑性加工連合講演会講演論文集
  
  Pages : 495-496
- Data Source
  KAKENHI-PROJECT-17560650
[Journal Article] Suppression of Surface Cracking in Hot Working of Steels Containing Copper2005
- Author(s)
  Chihiro Nagasaki
- Journal Title
  
  Advanced Technology of Plasticity 2005
  
  Pages : 697-698
- Data Source
  KAKENHI-PROJECT-17560650

1. AIZAWA Tatsuhiko (10134660)

# of Collaborated Projects : 6results

# of Collaborated Products : 0results
2. KIHARA Junji (00010801)

# of Collaborated Projects : 3results

# of Collaborated Products : 0results
3. 松原秀彰 (90167651)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
4. KISHI Teruo (40011085)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
5. TATSUZAWA Kiyohiko (70013729)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
6. IHARA Ikuo (80203280)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
7. KUWAHARA Hideyuki (90132795)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
8. KONDOH Katsuyoshi (50345138)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
9. WENBO Du (90345166)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
10. KOSEKI Toshihiko (70361532)

# of Collaborated Projects : 1results

# of Collaborated Products : 1results
11. ASAKURA Kentaro (10111460)

# of Collaborated Projects : 1results

# of Collaborated Products : 1results
12. 村石信二 (70345139)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
13. 諏訪嘉宏 (90339705)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
14. 都筑律子 (80345165)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
15. 中野博昭 (60056330)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
16. 徐陽 (60323664)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
17. IYORI Yuusuke

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
18. SHIBUKI Kunio

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
19. MITSUO Atsushi

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
20. 塚原祐輔

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
21. 三尾淳

# of Collaborated Projects : 1results

# of Collaborated Products : 0results

NAGASAKI Chihiro 長崎 千裕

Research Projects

Research Products

Co-Researchers

Establishment of technique for improving surface quality for recycling of steels in resource-cycled societyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Solid-State Synthesis and Processing of Advanced Magnesium Alloys toward Non-traditional Functionality

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of quantitative evaluation on interfacial strength for PVD coated materials.

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

セラミック材料粉体/粒状体の流動・加工特性評価法の開発

Principal Investigator

Project Period (FY)

Research Category

Research Institution

High pressured processing of nano particle and whisker reinforced ceramic composites

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of controlled fracture forming process for advanced functional materials

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Integrated Optimization of Melting, Casting and Plastic Working for Metals and Metallic Alloys

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Effects of Boron and Tin on Surface Hot Shortness due to Copper in Low Carbon Steel2006

Author(s)

Journal Title

Data Source

[Journal Article] 銅すず含有鋼の表面赤熱脆性に及ぼすボロン添加の効果2005

Author(s)

Journal Title

Data Source

[Journal Article] Suppression of Surface Cracking in Hot Working of Steels Containing Copper2005

Author(s)

Journal Title

Data Source

NAGASAKI Chihiro 長崎千裕