MITSUI Kimiyuki 三井公之

Researcher Number	90219668
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2005 – 2008: 慶應義塾大学, 理工学部, 教授 1994 – 2003: 慶應義塾大学, 理工学部, 教授 1997: 慶応義塾大学, 理工学部, 教授 1993: 慶應義塾大学, 理工学部・機械工学科, 教授 1992: 慶応義塾大学, 理工学部, 教授 … More 1991: Faculty of Science and Technology, KEIO University, Dept. of Mechanical Engineer, 理工学部, 教授 1990: 慶応義塾大学, 理工学部, 助教授 1990: 慶応義塾大学, 理工学部・機械, 助教授 Less
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / 機械工作 Except Principal Investigator 機械工作・生産工学 / 機械工作
Keywords	Principal Investigator マイクロ放電加工 / 圧電素子 / マイクロ部品 / マイクロファクトリ / Optical microscope / Image processing / 光学顕微鏡 / 画像処理 / 4分割フォトダイオード / 光計測技術 … More / 微細加工 / 表面粗さ / Thin sheet metal / Micro-electric discharge machining / Micro-machining / Optimum clearance / Stamp out machining / 異形穴の穴あけ加工 / マイクロ生産システム / クリアランス / 小型プレス穴あけ装置 / マイクロ加工 / 適正クリアランス / プレス穴あけ加工 / Quadrant photo diode / Optical measuring method / Micro-factory / Micro-machine tools / Spindle / Spindle rotation accuracy / 加工精度 / 光学的測定法 / マイクロスピンドル / マイクロファクトリー / マイクロ工作機械 / スピンドル / 主軸回転精度 / Optical near field / Optical fiber / Shapes and dimension measurarent / Micro-parts / Optical measurement / 光ファイバー / マイクロマシン技術 / 光学式プローブ / マイクロ部品計測 / 近接場光 / 光ファイバ / 形状・寸法計測 / 光計測 / Micro electric discharge machining / Piezo electric actuator / Micro parts / Accuracy / Measurement / 放電加工 / 精度 / 測定 / in-process measurement / displacement measurement / non-contact measurement / astigmatic focus error detection / astigmatism / ultrasonic wave / ハーフミラー / 非点収差法 / 変位計測 / 超音波 / 計測 / Surface roughness / CCD camera / Hadamard transform / Long focal length / 焦点深度 / 光学式顕微鏡 / 形状計測 / 画像計測 / 長焦点深度 / Sensor / Straightness / Machine Tool / Moving Accuracy / Precision Metrology / 微動ステ-ジ / 微小変位計 / センサ- / 真直度 / 工作機械 / 運動精度 / 精密計測 / パルスカウント法 / 放電エネルギー / モニタリング技術 / 振動付加放電加工 / 放電加工パルス / モニタリング / 加工状態のモニタリング / 振動付加 / 平行ばね / ダイヤモンド深針 / 触針式粗さ計 / 粗・微動連動制御 / レーザーダイオード / ラジアルモーション / 回転精度 / 非接触測定 / マイクロマシン / 寸法測定 / STM … More Except Principal Investigator circular motion / main spindle diagnosis / motion accuracy / network / remoto diagnosis / machine tool / 円運動 / ベアリング診断 / 運動精度 / ネットワーク / リモート診断 / 工作機械 / Non-Contact Measurement / 3-D Form Measurement / Expert System / Fuzzy Control / Robot / Polishing Tools / Automatic Polishing / Metal Molds / 非接触計測 / 三次元形状計測 / エキスパ-トシステム / ファジィ制御 / ロボット / 研磨工具 / 自動研磨 / 金型製造 Less

Study on vibration assisted micro-EDM and its machining condition monitoringPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Keio University
Optimum clearances for micro-shearing work of round and rectangular holesPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Keio University
Development of an optical measuring method for rotational accuracy of micro-spindlePrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Keio University
Development of optical probe for shapes and dimension measurement of micro-partsPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Keio University
Development of a Measuring Apparatus for Profile and dimension of Micro PartsPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Keio University
Development of Remote Diagnosis System of Machine Tool by Utilizing Network
- Principal Investigator
  
  INASAKI Ichiro
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Keio University
粗・微動連動制御機構による表面形状計測に関する研究Principal Investigator
- Principal Investigator
  
  三井公之
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Keio University
Development of a new displacement-measuring ultrasonic sensor based on astigmatic focus error detectionPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KEIO UNIVERSITY
Long Depth of a Focus Optical Microscopy Based on Computer Image ProcessingPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KEIO UNIVERSITY
光による軸の回転精度測定法の開発Principal Investigator
- Principal Investigator
  
  三井公之
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Keio University
STMの原理によるマイクロ部品の形状測定Principal Investigator
- Principal Investigator
  
  三井公之
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Keio University
Development of the new technology of machining, measuring and control for advanced manufacturing system of metal molds
- Principal Investigator
  
  INASAKI Ichiro
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Faculty of Science and Technology, KEIO University
Development of Precision Straightness Measuring SystemPrincipal Investigator
- Principal Investigator
  
  MITSUI Kimiyuki
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Faculty of Science and Technology, Keio University

All 2009 2008 2007 Other

All Journal Article Presentation

[Journal Article] A new method for monitoring micro-electric discharge machining processes2008
- Author(s)
  Muslim Mahardika , Kimiyuki Mitsui
- Journal Title
  
  International Journal of Machine Tools & Manufacture 48
  
  Pages: 446-458
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] Acoustic Emission signals in the micro-EDM of PCD2008
- Author(s)
  Muslim Mahardika, Kimiyuki Mitsui, Zahari Taha
- Journal Title
  
  Advanced Materials Research 33-37
  
  Pages: 1181-1186
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] A new approach on the determination of ease of machining by EDM processes2008
- Author(s)
  Muslim Mahardika, Takayuki Tsujimotoa, Kimiyuki Mitsui
- Journal Title
  
  International Journal of Machine Tools & Manufacture 48
  
  Pages: 746-760
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] Acoustic Emission signals in the micro-EDM of PCD2008
- Author(s)
  Muslim Mahardika, Kimiyuki Mitsui and Zahari Taha
- Journal Title
  
  Advanced Materials Research Vols. 33-37
  
  Pages: 1181-1186
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] Study of vibration-assisted micro-EDM --The effect of vibration on machining time and stability of discharge --2008
- Author(s)
  Takashi Endo, Takayuki Tsujimoto and Kimiyuki Mitsui
- Journal Title
  
  Precision Engineering 32
  
  Pages: 269-277
- NAID
  10029040554
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] A new method for monitoring micro-electric discharge machining processes2008
- Author(s)
  Muslim Mahardika, Kimiyuki Mitsui
- Journal Title
  
  International Journal of Machine Tools&Manufacture 48
  
  Pages: 446-458
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] Study of vibration-assisted micro-EDM --The effect of vibration on machining time and stability of discharge --2008
- Author(s)
  Takashi Endo, Takayuki Tsujimoto, Kimiyuki Mitsui
- Journal Title
  
  Precision Engineering 32
  
  Pages: 269-277
- NAID
  10029040554
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] A new method for monitoring micro-electric discharge machining processes2008
- Author(s)
  Muslim Mahardika, Kimiyuki Mitsui
- Journal Title
  
  International Journal of Machine Tools & Manufaoture 48
  
  Pages: 446-458
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19560123
[Journal Article] Machining accuracy for shearing process of thin sheet metals- development of initial tool position adjustment
- Author(s)
  Y.Kibe, Y.Okada, K.Mitsui
- Journal Title
  
  International Journal of Machine Tools and Manufacture (掲載決定)
- Data Source
  KAKENHI-PROJECT-17560103
[Journal Article] Machining accuracy for shearing process of thin sheet metals Development of initial tool position adjustment system-
- Author(s)
  Y.Kibe, Y.Okada, K.Mitsui
- Journal Title
  
  International Journal of Machine Tools and Manufacture (to be published)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17560103
[Journal Article] Machining accuracy for shearing process of thin sheet metals - Development of initial tool position adjustment
- Author(s)
  Y.Kibe, Y.Okada, K.Mitsui
- Journal Title
  
  International Journal of Machine Tools and Manufacture (掲載決定)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17560103
[Presentation] マイクロ放電加工の振動付加効果に関する研究(第二報)-二次元振動付加装置の試作-2009
- Author(s)
  松本望, 辻本隆之, Mahardika Muslim, 三井公之
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学 (神奈川)
- Year and Date
  2009-03-18
- Data Source
  KAKENHI-PROJECT-19560123
[Presentation] マイクロ放電加工の振動付加効果に関する研究(第二報)-二次元振動付加装置の試作-2008
- Author(s)
  松本望, 辻本隆之, Muslim Mahardika, 三井公之
- Organizer
  2008年度精密工学会春季大会学術講演会講演論文集(L36, 1017-1018)
- Place of Presentation
  明治大学(神奈川)
- Year and Date
  2008-03-18
- Data Source
  KAKENHI-PROJECT-19560123
[Presentation] マイクロ放電加工における振動付加効果に関する研究-振動付加効果を利用した微細矩形軸の製作-2007
- Author(s)
  辻本隆之, 松本望, Muslim Mahardika, 三井公之
- Organizer
  2007年度精密工学会秋季大会学術講演会講演論文集(E69, 393-394)
- Place of Presentation
  旭川ときわ市民ホール(旭川)
- Year and Date
  2007-09-13
- Data Source
  KAKENHI-PROJECT-19560123
[Presentation] Acoustic emission Signals in the Micro EDM of PCD2007
- Author(s)
  Mahardika M., Mitsui K.
- Organizer
  The 7th International Conference on Fracture and Strength of Solids
- Place of Presentation
  Urumqi,China
- Year and Date
  2007-08-28
- Data Source
  KAKENHI-PROJECT-19560123

1. INASAKI Ichiro (30051650)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
2. AOYAMA Tojiro (70129302)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
3. TAKEUCHI Yoshimi (50107546)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. MIYOSHI Takashi (00002048)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. SHIBATA Junji (30052822)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. AOYAMA Hideki (40149894)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. TSUKAMOTO Hidehiko

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. NASHIKI Masayuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. 塚本頴彦

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MITSUI Kimiyuki 三井 公之

Research Projects

Research Products

Co-Researchers

Study on vibration assisted micro-EDM and its machining condition monitoringPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Optimum clearances for micro-shearing work of round and rectangular holesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of an optical measuring method for rotational accuracy of micro-spindlePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of optical probe for shapes and dimension measurement of micro-partsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Measuring Apparatus for Profile and dimension of Micro PartsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Remote Diagnosis System of Machine Tool by Utilizing Network

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

粗・微動連動制御機構による表面形状計測に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a new displacement-measuring ultrasonic sensor based on astigmatic focus error detectionPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Long Depth of a Focus Optical Microscopy Based on Computer Image ProcessingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

光による軸の回転精度測定法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STMの原理によるマイクロ部品の形状測定Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the new technology of machining, measuring and control for advanced manufacturing system of metal molds

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Precision Straightness Measuring SystemPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

MITSUI Kimiyuki 三井公之