ZHU Xia 朱霞

Researcher Number	90325358
Other IDs
External Links
Affiliation (Current)	2025: 愛媛大学, 理工学研究科(工学系), 教授
Affiliation (based on the past Project Information) *help	2014: 愛媛大学, 理工学研究科, 助教 2006 – 2014: Ehime University, Graduate School of Science and Engineering, Lecture, 理工学研究科, 講師 2011: 愛媛大学, 大学院・理工学研究科, 講師 2006: 愛媛大学, 理工学研究科, 助手 2005: Ehime University, Faculty of Engineering, Lecturer, 工学部, 講師 2004 – 2005: 愛媛大学, 工学部, 助手
Review Section/Research Field	Principal Investigator Production engineering/Processing studies Except Principal Investigator Materials/Mechanics of materials / Production engineering/Processing studies
Keywords	Principal Investigator 成形加工 / 材料力学 / ニア・ネット・シェイプ / 加工学 / 生産工学 / 軸拡径率 / メカニカル・ラチェット現象 / quenching-tempering / high frequency induction preheating / Diameter-enlargement ratio … More / axle pressure / bending moment / working method for enlargement partial diameter / 軸肥大率 / バウシンガー効果 / 曲げ角度 / 焼入焼戻し / 高周波誘導予加熱 / 軸加圧力 / 曲げモーメント / 部分軸拡径加工法 / ニア･ネット･シェイプ / ねじりモーメント / 軸圧縮応力 / ねじり角度 / 中空軸材 … More Except Principal Investigator Porous Ceramics / Ceramics / FEM / Thermal fatigue / Thermal shock / 寸法効果 / 接触強度 / 多孔質 / セラミックス / 有限要素法解析 / 熱疲労 / 熱衝撃 / ハンマリング / ブラハ効果 / パルスレーザー / 成形加工 / レーザー / Blaha効果 / 塑性加工 / 超音波 Less

Innovative near-net-shape multistep shaft processing technique developmentPrincipal Investigator
- Principal Investigator
  
  ZHU XIA
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ehime University
Development of plastic forming method using pulse laser induced vibration
- Principal Investigator
  
  TAKAHASHI MANABU
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ehime University
New near-net-shape working method for shaft's cross sections partially enlarged and controlled by cyclic bending and axial compressive loading through metal moldsPrincipal Investigator
- Principal Investigator
  
  ZHU Xia
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ehime University
Processing Method Development for Forming Boss or Bellows on Hollow Shafts by Using of Mechanical Ratchet PhenomenonPrincipal Investigator
- Principal Investigator
  
  ZHU Xia
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ehime University
Evaluation Method of Thermal Shock for Porous Ceramics
- Principal Investigator
  
  TSUTSUMI Mitsuyoshi
- Project Period (FY)
  2004 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ehime University
Development of Novel Plastic Working Method for Enlargement Partial Diameter on ShaftPrincipal Investigator
- Principal Investigator
  
  ZHU Xia
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ehime University

All 2015 2014 2012 2011 2010 2009 2008 2007 2006 2005 Other

All Journal Article Presentation

[Journal Article] Investigation of Crack Generation in a Notch during Diameter-Enlargement Working Method Processing2015
- Author(s)
  Xia Zhu, Hironori Takahashi, Keiji Ogi, Manabu Takahashi and Nagatoshi Okabe
- Journal Title
  
  Key Engineering Materials
  
  Volume: - Pages: 1-5
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560135
[Journal Article] Basic Research on New Near-Net-Shape Working Method for Processing Multistage Shaft2014
- Author(s)
  Xia Zhu, Keiji Ogi, Manabu Takahashi, Nagatoshi Okabe and Kazuki Mori
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 473 Pages: 35-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560135
[Journal Article] Deformation Behaviors of Partial Diameter-enlargement Part Worked under Combination Loading of Torsion and Pressure2014
- Author(s)
  Xia Zhu, Keiji Ogi, Manabu Takahashi, Kazuki Mori and Nagatoshi Okabe
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 473 Pages: 30-34
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560135
[Journal Article] Deformation Behaviors of Partial Diameter-Enlargement Part Worked under Combination Loading of Torsion and Pressure2014
- Author(s)
  Xia Zhu, Keiji Ogi, Manabu Takahashi，Kazuki Mori and Nagatoshi Okabe
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 473 Pages: 30-34
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560135
[Journal Article] Fatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive Loading2012
- Author(s)
  Xia Zhu
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 217-219 Pages: 2346-2350
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24560135
[Journal Article] 塑性と加工2010
- Author(s)
  桑原義孝, 岡部永年, 生田文昭, 朱霞, 黄木景二
- Journal Title
  
  日本塑性加工学会
  
  Volume: Vol.51, No.592
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560126
[Journal Article] 塑性と加工2010
- Author(s)
  桑原義孝, 岡部永年, 朱霞, 黄木景二, 生田文昭
- Journal Title
  
  日本塑性加工学会
  
  Volume: Vol.51, No.592
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21560126
[Journal Article] Diameter Expansion Deformation Behavior of Midair Shaft Under Various Processing Conditions, Key Engineering Materials2007
- Author(s)
  Kengo FUJIKI, Xia ZHU, Kazuki MORI and Nagatoshi OKABE
- Journal Title
  
  Vols 345-346
  
  Pages: 1093-1096
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18560107
[Journal Article] 実用軸材への局部的軸径肥大加工法の適用2006
- Author(s)
  岡部永年, 朱霞, 森一樹, 井浦忠
- Journal Title
  
  塑性と加工 47・540
  
  Pages: 49-53
- NAID
  10016731552
- Data Source
  KAKENHI-PROJECT-16560096
[Journal Article] Development of New Diameter Expansion Processing Method for Hollow Shaft Under Load Conditions Combined Twist and Compression2006
- Author(s)
  Xia Zhu, Nagatoshi Okabe, Kazuki Mori, Manabu Takahashi, Tadashi Iura
- Journal Title
  
  Proceedings of Asian Symposium on Materials and Processing 2006 CD-ROM
- Data Source
  KAKENHI-PROJECT-18560107
[Journal Article] INFLUENCE OF HEAT-TREATMENT ON WORKABILITY FOR ENLARGING A PARTIAL DIAMETER OF A CARBON STEEL SHAFT2006
- Author(s)
  Xia ZHU
- Journal Title
  
  International Journal of Modern Physics B (Accepted)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560096
[Journal Article] PROCESSING MTHOD ENLARGING A PARTIAL DIAMETER OF STEEL SHAFT HEATED LOCALLY BY HIGH FREQUENCY INDUCTION2006
- Author(s)
  Kazuki MORI, Nagatoshi OKABE, Xia ZHU, Risa SUZUKI, Tadashi IURA
- Journal Title
  
  International Journal of Modern Physics B (Accepted)
- Data Source
  KAKENHI-PROJECT-16560096
[Journal Article] INFLUENCE OF HIGH-FREQUENCY INDUCTION PREHEATING ON PLASTIC-DEFORMATION DURING THE DLAMETER-ENLARGEMENT PROCESSING2006
- Author(s)
  X.Zhu, N.Okabe, K.Mori, T.Iura, M.Onishi
- Journal Title
  
  Proceedings of 7th World Congress on Computaional Mechanics CD-ROM
- Data Source
  KAKENHI-PROJECT-18560107
[Journal Article] INFLUENCE OF HEAT-TREATMENT ON WORKABILITY FOR ENLARGING A PARTIAL DIAMETER OF A CARBON STEEL SHAFT2006
- Author(s)
  Xia ZHU, Nagatoshi OKABE, Kazuki MORI, Tadashi IURA
- Journal Title
  
  International Journal of Modern Physics B (Accepted)
- Data Source
  KAKENHI-PROJECT-16560096
[Journal Article] ANALYSIS OF PLASTIC DEFORMATION BEHAVIORS DURING NOVEL ENLARGING PARTIAL DIAMETER PROCESS OF A SHAFT2006
- Author(s)
  X.Zhu, N.Okabe, M.Kuramoto, K.Mori, T.Iura
- Journal Title
  
  Proceedings of 7th World Congress on Computaional Mechanics CD-ROM
- Data Source
  KAKENHI-PROJECT-18560107
[Journal Article] 中空丸棒軸材への部分軸肥大加工法の適用2005
- Author(s)
  岡部永年, 朱霞, 森一樹, 井浦忠
- Journal Title
  
  塑性と加工 46・533
  
  Pages: 90-94
- NAID
  10014346335
- Data Source
  KAKENHI-PROJECT-16560096
[Journal Article] FATIGUE DAMAGE OF SHAFT WITH THE COLLAR FORMED BY A NEW DEFORMATION PROCESSING METHOD FOR ENLARGING PARTIAL DIAMETER2005
- Author(s)
  X.ZHU
- Journal Title
  
  Proceedings of the 11th International Conference on Fracture (ICF11) (CD-ROM)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16560096
[Journal Article] 部分軸肥大加工法における軸肥大変形挙動に及ぼす被加工材の強度特性の影響2005
- Author(s)
  井浦忠, 岡部永年, 朱霞
- Journal Title
  
  塑性と加工 46・531
  
  Pages: 55-59
- NAID
  10014007027
- Data Source
  KAKENHI-PROJECT-16560096
[Presentation] ニア・ネット・シェイプ多段軸加工に関する加工条件の調査2015
- Author(s)
  川口拓海、朱霞、黄木景二、岡部永年
- Organizer
  日本機械学会中国四国学生会第45回学生員卒業研究発表講演会
- Place of Presentation
  近畿大学工学部、広島県東広島市高屋うめの辺1番
- Year and Date
  2015-03-05
- Data Source
  KAKENHI-PROJECT-24560135
[Presentation] 高速回転軸肥大加工における肥大部の変形挙動の観察2015
- Author(s)
  川口元志、黄木景二、朱霞、岡部永年、桑原義孝
- Organizer
  日本機械学会中国四国学生会第45回学生員卒業研究発表講演会
- Place of Presentation
  近畿大学工学部、広島県東広島市高屋うめの辺1番
- Year and Date
  2015-03-05
- Data Source
  KAKENHI-PROJECT-24560135
[Presentation] 中国四国支部第50期総会・講演会2012
- Author(s)
  井上善登, 岩崎宏文, 黄木景二, 朱霞, 岡部永年
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] Investigation of Deformation Behavior of Shaft's Cross Section Partially Enlarged and Controlled by Cyclic Bending and Axial Compressive Loading through Metal Mold2012
- Author(s)
  X. Zhu
- Organizer
  4th International Conference on Computational Methods
- Place of Presentation
  Gold Coast, Australia
- Data Source
  KAKENHI-PROJECT-24560135
[Presentation] 中国四国支部第50期総会・講演会2012
- Author(s)
  坂田大貴, 高橋学, 黄木景二, 朱霞, 古川貴大, 加藤大典
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国学生会第41回学生員卒業研究発表講演会2011
- Author(s)
  岡部恭平, 黄木景二, 朱霞, 岡部永年, 岩崎宏文, 井上善登
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国学生会第41回学生員卒業研究発表講演会2011
- Author(s)
  八原将時, 黄木景二, 高橋学, 朱霞, 岡部永年, 古川貴大
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国支部第49期総会・講演会2011
- Author(s)
  古川貴大, 黄木景二, 高橋学, 朱霞, 岡部永年, 八原将時
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 四国支部第8回学術講演会2010
- Author(s)
  井上善登, 黄木景二, 朱霞, 岩崎宏文, 岡部永年
- Organizer
  日本材料学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation]2010
- Author(s)
  Xia Zhu, Manabu Takahash, Nagatoshi Okabe, Keiji Ogi
- Organizer
  the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics
- Place of Presentation
  Sydney, Australia
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国学生会第40回学生員卒業研究発表講演会2010
- Author(s)
  古川貴大, 朱霞, 高橋学, 黄木景二, 岡部永年, 生田文昭
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 徳島講演会2010
- Author(s)
  村上弥央, 黄木景二, 朱霞, 岡部永年, 生田文昭, 桑原義孝
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] Simulation of Deformation Behavior of Shaft's Cross Section Partially Enlarged and Controlled by Cyclic Bending and Axial Compressive Loading through Metal Mold2010
- Author(s)
  朱霞(ZHU Xia)
- Organizer
  the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics
- Place of Presentation
  Sydney, Australia
- Year and Date
  2010-07-23
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国学生会第40回学生員卒業研究発表講演会2010
- Author(s)
  井上善登, 岩崎宏文, 朱霞, 黄木景二, 岡部永年
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国学生会第40回学生員卒業研究発表講演会2010
- Author(s)
  村上弥央, 朱霞, 黄木景二, 岡部永年, 生田文昭, 桑原義孝
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 軸肥大加工技術の応用展開2010
- Author(s)
  朱霞
- Organizer
  テクニカルショウヨコハマ2010
- Place of Presentation
  神奈川県, 横浜市
- Year and Date
  2010-02-04
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中国四国学生会第40回学生員卒業研究発表講演会2010
- Author(s)
  大野恭平, 朱霞, 黄木景二, 岡部永年, 桑原義孝, 森一樹
- Organizer
  日本機械学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 第60回塑性加工連合講演会2009
- Author(s)
  佐伯亮輔, 桑原義孝, 朱霞, 岡部永年, 黄木景二, 生田文昭
- Organizer
  日本塑性加工学会主催
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 第14回破壊力学シンポジウム2009
- Author(s)
  匹野大輔, 朱霞, 岡部永年, 黄木景二, 桑原義孝, 生田文昭
- Organizer
  日本材料学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 第60回塑性加工連合講演会2009
- Author(s)
  山口功祐, 桑原義孝, 朱霞, 岡部永年, 黄木景二, 生田文昭
- Organizer
  日本塑性加工学会主催
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 第14回破壊力学シンポジウム2009
- Author(s)
  西崎泰典, 桑原義孝, 朱霞, 岡部永年, 黄木景二, 生田文昭
- Organizer
  日本材料学会
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation]2009
- Author(s)
  X. Zhu, Y. Kuwahara, N. Okabe, K. Ogi and F. Ikuta
- Organizer
  Proceedings of 4th International Conference on Experimental Mechanics
- Place of Presentation
  Singapore
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] Investigation on fatigue strength of a shaft with diameter enlarged partially by combination of a cyclic bending load with an axial compressive load2009
- Author(s)
  朱霞
- Organizer
  4th International Conference on Experimental Mechanics 2009
- Place of Presentation
  シンガポール
- Year and Date
  2009-09-24
- Data Source
  KAKENHI-PROJECT-21560126
[Presentation] 中空軸材における軸肥大加工法の最適加工条件について2008
- Author(s)
  朱霞, 岡部永年, 他4名
- Organizer
  日本機械学会中国四国支部講演会
- Place of Presentation
  広島大学
- Year and Date
  2008-03-07
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] ねじり軸肥大加工法による中空軸材の被加工部の成形挙動2008
- Author(s)
  朱霞, 岡部永年, 他3名
- Organizer
  第59回塑性加工連合講演会
- Place of Presentation
  広島大学
- Year and Date
  2008-11-08
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] Local Diameter Enlargement Deformation Behaviors of Shaft under Load Conditions of Combining torsional stress and Compressive Stress2007
- Author(s)
  Xia Zhu, Kazuki Mori, Nagatoshi Okabe, Keiji Ogi
- Place of Presentation
  Kyoto, Japan
- Year and Date
  2007-12-05
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] Local Diameter Enlargement Deformation Behaviors of Shaft under Load Conditions of Combining torsional stress and Compressive Stress2007
- Author(s)
  Xia Zhu (朱霞)
- Organizer
  the Third Asian-Pacific Congress on Computational Mechanics
- Place of Presentation
  Kyoto,Japan
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] ねじり軸肥大加工法の基礎的研究2007
- Author(s)
  朱霞, 岡部永年, 他4名
- Organizer
  第15回機械材料・材料加工技術講演会
- Place of Presentation
  長岡
- Year and Date
  2007-11-18
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] ねじり軸肥大加工法の基礎研究, 日本塑性加工学会中国四国支部2007
- Author(s)
  朱霞, 岡部永年, 他4名
- Organizer
  第7回学生研究発表会
- Place of Presentation
  愛媛大学
- Year and Date
  2007-11-18
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] ANALYSIS OF PLASTIC DEFORMATION BEHAVIORS DURING NOVEL ENLARGING PARTIAL DIAMETER PROCESS OF A SHAFT2006
- Author(s)
  X. Zhu, N. Okabe, M. Kuramoto, K. Mori and T. Iura
- Organizer
  Proceedings of 7th World Congress on Computational Mechanics
- Place of Presentation
  Los Angeles, California, USA
- Year and Date
  2006-07-19
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] 中空軸材における軸肥大加工法の適用, 日本塑性加工学会中国四国支部2006
- Author(s)
  朱霞, 岡部永年, 他4名
- Organizer
  第7回学生研究発表会
- Place of Presentation
  愛媛大学
- Year and Date
  2006-12-08
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] 厚肉中空軸材への軸肥大加工の応用, 日本材料学会四国支部2006
- Author(s)
  朱霞, 岡部永年, 他3名
- Organizer
  第5回学術講演会
- Place of Presentation
  愛媛大学
- Year and Date
  2006-04-21
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] Development of New Diameter Expansion Processing Method for Hollow Shaft Under Load Conditions Combined Twist and Compression2006
- Author(s)
  Xia Zhu, Nagatoshi Okabe, Kazuki Mori, Manabu Takahashi, Tadashi Iura
- Organizer
  Proceedings of Asian Symposium on Materials and Processing
- Place of Presentation
  Bangkok, Thailand
- Year and Date
  2006-11-09
- Data Source
  KAKENHI-PROJECT-18560107
[Presentation] Fatigue damage in diameter-enlargement part formed by cyclic bending and axial compressive Load
- Author(s)
  Xia Zhu, Nagatoshi Okabe, Keiji Ogi and Manabu Takahashi
- Organizer
  The 20th European Conference on Fracture
- Place of Presentation
  Natural Sciences Building at the university campus, Norwegian university of science and technology, NTNU, NO-7491 Trondheim, Norway
- Year and Date
  2014-06-30 – 2014-07-04
- Data Source
  KAKENHI-PROJECT-24560135

1. OKABE Nagatoshi (20281181)

# of Collaborated Projects: 5 results

# of Collaborated Products: 43 results
2. TSUTSUMI Mitsuyoshi (70293925)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
3. TAKAHASHI Manabu (20274334)

# of Collaborated Projects: 3 results

# of Collaborated Products: 2 results
4. MATSUSHITA Masafumi (90432799)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. KUWAHARA Yoshitaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 10 results

ZHU Xia 朱 霞

Research Projects

Research Products

Co-Researchers

Innovative near-net-shape multistep shaft processing technique developmentPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of plastic forming method using pulse laser induced vibration

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

New near-net-shape working method for shaft's cross sections partially enlarged and controlled by cyclic bending and axial compressive loading through metal moldsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Processing Method Development for Forming Boss or Bellows on Hollow Shafts by Using of Mechanical Ratchet PhenomenonPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Evaluation Method of Thermal Shock for Porous Ceramics

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Novel Plastic Working Method for Enlargement Partial Diameter on ShaftPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Investigation of Crack Generation in a Notch during Diameter-Enlargement Working Method Processing2015

Author(s)

Journal Title

Data Source

[Journal Article] Basic Research on New Near-Net-Shape Working Method for Processing Multistage Shaft2014

Author(s)

Journal Title

Data Source

[Journal Article] Deformation Behaviors of Partial Diameter-enlargement Part Worked under Combination Loading of Torsion and Pressure2014

Author(s)

Journal Title

Data Source

[Journal Article] Deformation Behaviors of Partial Diameter-Enlargement Part Worked under Combination Loading of Torsion and Pressure2014

Author(s)

Journal Title

Data Source

[Journal Article] Fatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive Loading2012

Author(s)

Journal Title

Data Source

[Journal Article] 塑性と加工2010

Author(s)

Journal Title

Data Source

[Journal Article] 塑性と加工2010

Author(s)

Journal Title

Data Source

[Journal Article] Diameter Expansion Deformation Behavior of Midair Shaft Under Various Processing Conditions, Key Engineering Materials2007

Author(s)

Journal Title

Data Source

[Journal Article] 実用軸材への局部的軸径肥大加工法の適用2006

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Development of New Diameter Expansion Processing Method for Hollow Shaft Under Load Conditions Combined Twist and Compression2006

Author(s)

Journal Title

ZHU Xia 朱霞