GOTOH Hiromitsu 後藤啓光

Researcher Number	90389718
Other IDs
Affiliation *help	2018 : 筑波技術大学, 産業技術学部, 准教授 2016 : 筑波技術大学, 産業技術学部, 准教授 2014 – 2015 : 筑波技術大学, 産業技術学部, 助教 2013 : 東京電機大学, 工学部, 准教授 2012 : 筑波技術大学, 産業情報学科, 助教 2010 – 2012 : 筑波技術大学, 産業技術学部, 助教
Review Section/Research Field	Principal Investigator Production engineering/Processing studies Except Principal Investigator Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 放電加工 / 回動 / セラミックス / 放電創成加工 / 成形加工 / 機械工作・生産工学 / 補助電極 Except Principal Investigator 炭素繊維強化プラスティック

CFRPの深穴微細加工技術および評価法の確立Ongoing
- Principal Investigator
  
  明松圭昭
- Project Period (FY)
  2018 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Tsukuba University of Technology
回動ガイドを用いた機能性セラミックスのワイヤ放電ミーリング加工の実現Principal InvestigatorOngoing
- Principal Investigator
  
  後藤啓光
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tsukuba University of Technology
Development of the wire electrical discharge milling using a wire guide with reciprocating rotationPrincipal Investigator
- Principal Investigator
  
  GOTOH Hiromitsu
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tsukuba University of Technology
  Tokyo Denki University
Study on realization of the tool movement envelope for thefine ceramics by electrical discharge machiningPrincipal Investigator
- Principal Investigator
  
  GOTOH Hiromitsu
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tsukuba University of Technology

All 2016 2015 2013 2012 2011 2010 Other

All Journal Article Presentation

[Journal Article] Stady of deposition machining using electrical discharge with reciprocating rotation in air gap2016
- Author(s)
  Atsutoshi Hirao, Takayuki Tani, Hiromitsu Gotoh, Shojyu Aoshima, Naotake Mohri
- Journal Title
  
  International Journal of Electrical Machining
  
  Volume : 21 Pages : 1-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25820019
[Journal Article] EDM of insulating ceramics by electrical conductive surface layer control2016
- Author(s)
  H.Gotoh, T. Tani, N. Mohri
- Journal Title
  
  Procedia-CIRP Annals-Manufacturing Technology
  
  Volume : 42 Pages : 201-205
- DOI
  10.1016/j.procir.2016.02.271
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25820019, KAKENHI-PROJECT-16K06002
[Journal Article] 絶縁性Si3N4セラミックスの放電加工における導電性被膜の形成メカニズムに関する一考察2016
- Author(s)
  後藤啓光，谷貴幸，毛利尚武
- Journal Title
  
  電気加工学会,50巻,124号,pp.112-118（2016)
  
  Volume : 50 Pages : 112-118
- Data Source
  KAKENHI-PROJECT-16K06002
[Journal Article] Simmultaneous machining of polygonal microelectrode and microholes using tandem EDM mechanism2016
- Author(s)
  T. Tani, H.Gotoh, A.Hirao, N. Mohri
- Journal Title
  
  Procedia-CIRP Annals-Manufacturing Technology
  
  Volume : 42 Pages : 521-525
- DOI
  10.1016/j.procir.2016.02.244
- Peer Reviewed / Open Access / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25820019, KAKENHI-PROJECT-16K06002, KAKENHI-PROJECT-16K06794
[Journal Article] Machining Characteristics of Wire Electrical Discharge Machining on Insulating Si3N4 Ceramics-Relation ship between Electrical Conductive Layer and Machininig Characteristics-2015
- Author(s)
  Hiromitsu Gotoh, Takayuki Tani,and Naotake Mohri
- Journal Title
  
  International Journal of Electrical Machining
  
  Volume : 20 Pages : 17-24
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25820019
[Journal Article] 亜鉛合金縮小成形電極を用いた多角形形状の連続微細穴放電加工2015
- Author(s)
  谷貴幸，後藤啓光，平尾篤利，毛利尚武
- Journal Title
  
  電気加工学会
  
  Volume : 49 Pages : 32-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25820019
[Journal Article] Machining Characteristics of Wire Electrical Discharge Machining on Insulating Si3N4 Ceramics -Relationship between Electrical Conductibe Layer and Machining Characteristics-2015
- Author(s)
  Hiromitsu Gotoh, Takayuki Tani, Naotake Mohri
- Journal Title
  
  International Journal of Electrical Machining
  
  Volume : 20 Pages : 17-24
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25820019
[Journal Article] 亜鉛合金縮小成形電極を用いた多角形形状の連続微細穴放電加工2015
- Author(s)
  谷貴幸, 後藤啓光, 平尾篤利, 毛利尚武
- Journal Title
  
  電気加工学会誌
  
  Volume : 49 Pages : 32-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25820019
[Journal Article] Wire electrical discharge milling using a wire guide with reciprocating rotation2013
- Author(s)
  H. Gotoh, T. Tani, M. Okada, A. Goto, T. Masuzawa, N. Mohri
- Journal Title
  
  Procedia-CIRP Annals-Manufacturing Technology
  
  Volume : Vol. 6 Pages : 200-204
- DOI
  10.1016/j.procir.2013.03.051
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760093, KAKENHI-PROJECT-25820019
[Journal Article] Effect of Insulating Si3N4 Ceramics on Removal Rate by EDM with Piezoelectric Device2013
- Author(s)
  Takayuki Tani, Hiromitsu Gotoh, Atsutoshi Hirao, Naotake Mohri(Takayuki Tani)
- Journal Title
  
  International Journal of Electrical Machining
  
  Volume : No.18 Pages : 37-42
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] デュアルサーボ送り機構を用いた微細放電加工2016
- Author(s)
  金子健正，牛膓歩駆人，池田富士雄，後藤啓光，谷貴幸
- Organizer
  精密工学会
- Place of Presentation
  新潟県新潟市
- Year and Date
  2016-12-12
- Data Source
  KAKENHI-PROJECT-16K06002
[Presentation] デュアルサーボ送り機構による微細深穴放電加工2016
- Author(s)
  金子健正，牛膓歩駆人，池田富士雄，後藤啓光，谷貴幸
- Organizer
  電気加工学会
- Place of Presentation
  愛知県名古屋市
- Year and Date
  2016-12-01
- Data Source
  KAKENHI-PROJECT-16K06002
[Presentation] 単発放電による材料除去過程の観察2016
- Author(s)
  辻田容季，谷貴幸，後藤啓光，毛利尚武
- Organizer
  電気加工学会
- Place of Presentation
  愛知県名古屋市
- Year and Date
  2016-12-01
- Data Source
  KAKENHI-PROJECT-16K06002
[Presentation] 熱可塑性ＣＦＲＰの加工に関する研究-超音波穿孔加工の試み-2016
- Author(s)
  後藤啓光，谷貴幸，明松圭昭，菅野啓太，毛利尚武
- Organizer
  電気加工学会
- Place of Presentation
  愛知県名古屋市
- Year and Date
  2016-12-01
- Data Source
  KAKENHI-PROJECT-16K06002
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング加工法の開発-絶縁性Si3N4セラミックスに対する加工-2015
- Author(s)
  後藤啓光, 谷貴幸, 毛利尚武
- Organizer
  電気加工学会全国大会(2015)講演論文集
- Place of Presentation
  四国大学交流プラザ（徳島県徳島市）
- Year and Date
  2015-12-03
- Data Source
  KAKENHI-PROJECT-25820019
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング加工法の開発2012
- Author(s)
  後藤啓光,谷貴幸,後藤昭弘,増沢隆久,毛利尚武
- Organizer
  第9回生産加工・工作機械部門講演会
- Place of Presentation
  秋田
- Year and Date
  2012-10-27
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング2012
- Author(s)
  後藤啓光,谷貴幸,毛利尚武
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  東京
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング2012
- Author(s)
  後藤啓光
- Organizer
  2012年度精密工学会春季大会学術講演会
- Place of Presentation
  首都大学東京
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング加工法の開発-回動条件が加工特性におよぼす影響-2012
- Author(s)
  後藤啓光,谷貴幸,後藤昭弘,増沢隆久,毛利尚武
- Organizer
  電気加工学会全国大会(2012)
- Place of Presentation
  小倉
- Year and Date
  2012-12-07
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いた放電加工2011
- Author(s)
  後藤啓光,谷貴幸,毛利尚武
- Organizer
  電気加工学会全国大会(2011)
- Place of Presentation
  つくば
- Year and Date
  2011-11-25
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 亜鉛合金を用いたSi_3N_4セラミックスの放電加工2011
- Author(s)
  後藤啓光,谷貴幸,毛利尚武
- Organizer
  2011年度精密工学会春季大会学術講演会
- Place of Presentation
  東京
- Year and Date
  2011-03-14
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 亜鉛合金を用いたSi_3N_4セラミックスの放電加工2011
- Author(s)
  後藤啓光
- Organizer
  2011年度精密工学会春季大会学術講演会
- Place of Presentation
  東洋大学白山キャンパス
- Year and Date
  2011-03-14
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いた放電加工2011
- Author(s)
  後藤啓光
- Organizer
  電気加工学会全国大会(2011)
- Place of Presentation
  茨城県つくば市研究交流センター
- Year and Date
  2011-11-25
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 絶縁性Si_3N_4セラミックスの放電創成加工に関する研究2010
- Author(s)
  後藤啓光
- Organizer
  電気加工学会全国大会(2010)
- Place of Presentation
  アクトシティ浜松研修交流センター
- Year and Date
  2010-11-25
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 絶縁性Si_3N_4セラミックスの放電創成加工に関する研究2010
- Author(s)
  後藤啓光,谷貴幸,毛利尚武
- Organizer
  電気加工学会全国大会(2010)
- Place of Presentation
  静岡
- Year and Date
  2010-11-25
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング加工法の開発
- Author(s)
  後藤啓光
- Organizer
  第9回生産加工・工作機械部門講演会
- Place of Presentation
  秋田県立大学（秋田県）
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング加工法の開発-回動条件が加工特性におよぼす影響-
- Author(s)
  後藤啓光
- Organizer
  電気加工学会全国大会(2012)
- Place of Presentation
  九州工業大学（福岡県）
- Data Source
  KAKENHI-PROJECT-22760093
[Presentation] 加工溝を用いた走査放電加工による微細軸成形法
- Author(s)
  谷貴幸，後藤啓光，平尾篤利，毛利尚武
- Organizer
  日本機械学会
- Place of Presentation
  徳島大学(徳島県徳島市)
- Year and Date
  2014-11-15 – 2014-11-16
- Data Source
  KAKENHI-PROJECT-25820019
[Presentation] 回動ワイヤガイドを用いたワイヤ放電ミーリング-第２報　加工面の表面性状について-
- Author(s)
  後藤啓光，谷貴幸，後藤昭弘，増沢隆久，毛利尚武
- Organizer
  電気加工学会
- Place of Presentation
  新潟大学(新潟県新潟市)
- Year and Date
  2014-12-04 – 2014-12-05
- Data Source
  KAKENHI-PROJECT-25820019

1. 明松圭昭 (20396766)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
2. TAKEZAWA Hideki

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
3. HIRAO Atsutoshi

# of Collaborated Projects : 1results

# of Collaborated Products : 5results
4. 谷貴幸

# of Collaborated Projects : 0results

# of Collaborated Products : 1results

GOTOH Hiromitsu 後藤 啓光

Research Projects

Research Products

Co-Researchers

CFRPの深穴微細加工技術および評価法の確立Ongoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

回動ガイドを用いた機能性セラミックスのワイヤ放電ミーリング加工の実現Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of the wire electrical discharge milling using a wire guide with reciprocating rotationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on realization of the tool movement envelope for thefine ceramics by electrical discharge machiningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Stady of deposition machining using electrical discharge with reciprocating rotation in air gap2016

Author(s)

Journal Title

Data Source

[Journal Article] EDM of insulating ceramics by electrical conductive surface layer control2016

Author(s)

Journal Title

DOI

Data Source

[Journal Article] 絶縁性Si3N4セラミックスの放電加工における導電性被膜の形成メカニズムに関する一考察2016

Author(s)

Journal Title

Data Source

[Journal Article] Simmultaneous machining of polygonal microelectrode and microholes using tandem EDM mechanism2016

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Machining Characteristics of Wire Electrical Discharge Machining on Insulating Si3N4 Ceramics-Relation ship between Electrical Conductive Layer and Machininig Characteristics-2015

Author(s)

Journal Title

Data Source

[Journal Article] 亜鉛合金縮小成形電極を用いた多角形形状の連続微細穴放電加工2015

Author(s)

Journal Title

Data Source

[Journal Article] Machining Characteristics of Wire Electrical Discharge Machining on Insulating Si3N4 Ceramics -Relationship between Electrical Conductibe Layer and Machining Characteristics-2015

Author(s)

Journal Title

Data Source

[Journal Article] 亜鉛合金縮小成形電極を用いた多角形形状の連続微細穴放電加工2015

Author(s)

Journal Title

Data Source

[Journal Article] Wire electrical discharge milling using a wire guide with reciprocating rotation2013

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Effect of Insulating Si3N4 Ceramics on Removal Rate by EDM with Piezoelectric Device2013

Author(s)

Journal Title

Data Source

[Presentation] デュアルサーボ送り機構を用いた微細放電加工2016

Author(s)

Organizer

Place of Presentation

Year and Date

Data Source

[Presentation] デュアルサーボ送り機構による微細深穴放電加工2016

Author(s)

Organizer

GOTOH Hiromitsu 後藤啓光