• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

SASAHARA Hiroyuki  笹原 弘之

ORCIDConnect your ORCID iD *help
… Alternative Names

Sasahara Hiroyuki  笹原 弘之

Less
Researcher Number 00205882
Other IDs
Affiliation (Current) 2025: 東京農工大学, 工学(系)研究科(研究院), 教授
Affiliation (based on the past Project Information) *help 2023 – 2024: 東京農工大学, 工学(系)研究科(研究院), 教授
2013 – 2021: 東京農工大学, 工学(系)研究科(研究院), 教授
2015: 東京農工大学, 大学院工学研究院, 教授
2010: 国立大学法人東京農工大学, 大学院・工学研究院, 教授
2010: 東京農工大学, 大学院・工学研究院, 教授 … More
2009 – 2010: 東京農工大学, 大学院・共生科学技術研究院, 教授
2007 – 2008: Tokyo University of Agriculture and Technology, 大学院・共生科学技術研究院, 准教授
2006: Tokyo University of Agriculture and Technology, Institute of Symbiotic Agriculture and Technology, Associate Professor, 大学院共生科学技術研究院, 助教授
2004 – 2005: 東京農工大学, 大学院・共生科学技術研究部, 助教授
2004: National University Corporation Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Associate Professor, 大学院・共生科学技術研究部, 助教授
2001 – 2003: 東京農工大学, 工学部, 助教授
2000: 農工大, 工学部, 助教授
1999: 東京農工大学, 工学部・, 助教授
1996 – 1998: 東京農工大学, 工学部, 講師
1991 – 1995: 東京工業大学, 工学部, 助手
1993: Tokyo Inst.of Teck.Engineering Research Associete
1989: Tokyo Inst. Tech., Faculty Engg., Research Associate, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / 機械工作・生産工学 / Basic Section 18020:Manufacturing and production engineering-related
Except Principal Investigator
Production engineering/Processing studies / 機械工作・生産工学 / 機械工作 / Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
Keywords
Principal Investigator
切削 / エンドミル加工 / アディティブ・マニュファクチャリング / 機械工作・生産工学 / エンドミル / 疲労寿命 / 機械加工 / 工具 / オイルミスト / モニタリング … More / ナノ結晶 / 表面改質 / ショットピーニング / 残留応力 / MQL / 高速切削 / 切削加工 / 機能性 / 異方性 / マルチマテリアル造形 / 冷却 / 異種金属造形 / マグネシウム合金 / 精度 / 金属組織 / アーク放電 / Surface hardness / Surface enhancement / Nanocrystalline Structure / Functional surface / Burnishing / Friction burnishing / Tool / Cutting / あらさ / 表面硬化 / 機能表面 / バニシング / 摩擦攪拌 / 丸のこ / CFRP / 仕上げ面粗さ / 研削温度 / 砥石 / 研削油剤 / 研削加工 / 耐食性 / 摩擦攪拌バニシング / 粗さ / 加工精度 / 切削温度 / 穴加工 / ボールエンドミル / 有限要素法解析 / 潤滑 / 工具温度 / 有限要素法 / 工具摩耗 / 高速加工 / オイルミスト潤滑 / シミュレーション / 高硬度材切削 … More
Except Principal Investigator
切削加工 / 切削 / マシニングセンタ / 切削温度 / 幾何偏差 / 精密部品加工 / 工程設計 / 超精密切削加工 / MEMS / geometric deviation / 主軸頭旋回形 / テーブル旋回形 / 5軸制御マシニングセンタ / 多軸制御工作機械 / virtual machining / 工具摩耗 / 可視化 / Cutting / 残留応力 / FEM / 表面特性 / 機械工作・生産工学 / 同時5軸制御 / 機構誤差 / サーボ誤差 / ボールバー / 5軸制御 / 作業設計 / DX / 機械加工 / マイクロテクスチャ / 金型加工 / セッティング誤差 / 複雑形状部品加工 / トポロジー最適化 / フライス加工 / 超精密計測 / ダイヤモンド工具 / 機上計測 / database / knowledge base / evaluating function / machining troubles / optimum cutting conditions / turning / expert system / CNC加工 / 最適切削条件 / 知識獲得 / メタ知識 / ファジー関数 / 特徴抽出 / トラブル処理システム / 旋削加工 / エキスパートシステム / 推論説明機能 / 学習機能 / 知識ベ-ス / デ-タベ-ス / エキスパ-トシステム / simultaneous five-axis control / simultaneous two-axis control / servo error / pitch error / five-axis controlled machining centers / multi-axis machine tools / 同期精度 / 運動精度 / 同時2軸制御 / YAG laser / indentation / epitaxy / nano structure / surface integrity / thin layer / Silicon Carbonate (SiC) / Sic / サーフェスインテグリティー / YAGレーザ / インデンテーション / エピタキシ / ナノ構造 / サーフェスインテグリティ / 薄膜層 / SiC / multi-tasking machine / rotary axis / compensation method / identification method / five-axis machining center / multi-axis machine tool / 幾何精度 / 同定 / 機構解析 / 5軸 / 複合加工機 / 旋回軸 / 補正方法 / 同定方法 / cutting temperature / chip control / surface characteristics / tool wear / chip formation / computer simulation / cutting / 工具面温度 / 切りくず処理 / 切りくず生成 / 仮想切削 / コンピュータ・シミュレーション / machining system / machining / すくい面応力分布 / 延性破壊 / 鋸歯状切りくず生成 / 熱弾塑性有限要素法 / バーチャルマシニング / 高速切削 / バーチャルマシ-ニング / 生産加工システム / indenter / coating layr / molecurer dinamics / finite element method / ultra micro hardness / hardness test / hard thin layr / TiN薄膜 / コーテッド工具 / 強塑性有限要素法 / 圧子 / 結合層 / コーティング層 / 分子動力学 / 弾塑性有限要素法 / 微小硬度 / 硬度試験 / 硬質薄膜 / Tool wear / Cutting temperature / Cutting model / Visualization / Know-how / Expert / Process Planning / ノウハウ / 熟練技能者 / 切削温度シミュレーション / 切削モデル / 知識ノウハウ / 熟練技術者 / Geometrical accuracy / Residual strain / Residual stress / Simulation / Surface characteristics / Machined surface / Orthogonal cutting / 流動応力 / 組織予測 / 材質予測 / 形状精度 / 残留ひずみ / シミュレーション / 切削加工層 / 2次元切削 / 多孔質材料 / 柔軟材料 / 把持具 / 多軸制御加工 / ボールエンドミル / 表面凹凸 / R-test / 輪郭形状精度 / 5軸マシニングセンタ / ピッチ誤差 / 四角すい台 / 円すい台 / 制御 / 機械力学 / シミュレーション工学 / 生産工学 / 工作機械 / 計算加工システム Less
  • Research Projects

    (29 results)
  • Research Products

    (83 results)
  • Co-Researchers

    (27 People)
  •  機械加工のDX推進に向けて加工環境を反映した加工工程を計画するデジタル工程設計

    • Principal Investigator
      中本 圭一
    • Project Period (FY)
      2024 – 2026
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  ワイヤ+アーク放電方式によるマルチマテリアル付加加工における機能創成Principal Investigator

    • Principal Investigator
      笹原 弘之
    • Project Period (FY)
      2023 – 2025
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Function creation in additive manufacturing using Mg alloys and dissimilar metals with wire arc dischargePrincipal Investigator

    • Principal Investigator
      Sasahara Hiroyuki
    • Project Period (FY)
      2019 – 2021
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Systematization of Process Planning for Machining Operations Based on Topology Optimization of Workpiece

    • Principal Investigator
      NAKAMOTO Keiichi
    • Project Period (FY)
      2018 – 2019
    • Research Category
      Grant-in-Aid for Challenging Research (Exploratory)
    • Review Section
      Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Development an Ultraprecision Cutting System for Highly Efficient Machining of Die Having Free-form Surface with Micro Textures

    • Principal Investigator
      NAKAMOTO Keiichi
    • Project Period (FY)
      2018 – 2020
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Form accuracy and soundness in wire + arc additive manufacturing of metalPrincipal Investigator

    • Principal Investigator
      Sasahara Hiroyuki
    • Project Period (FY)
      2016 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Development of an autonomous ultra-precision machine tool having functions of on-machine measurement and tool shaping

    • Principal Investigator
      NAKAMOTO Keiichi
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Development of a circular sawing machine to enable the high-speed curved-line cutting of CFRPPrincipal Investigator

    • Principal Investigator
      Sasahara Hiroyuki
    • Project Period (FY)
      2014 – 2015
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Dexterous machining of soft objects by employing an aqueous solution of sodium acetate

    • Principal Investigator
      NAKAMOTO Keiichi
    • Project Period (FY)
      2014 – 2015
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Study on the optimization of grinding point environment by a direct supply of grinding fluid from inner side of the grinding wheelPrincipal Investigator

    • Principal Investigator
      Sasahara Hiroyuki
    • Project Period (FY)
      2013 – 2015
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  CONTROL OF CUTTER MARKS ARRAY BY SIMULTANEOUS MULTI-AXIS CONTROLLED MILLING USING BALL-END MILL

    • Principal Investigator
      MATSUDA Hiroshi
    • Project Period (FY)
      2009 – 2010
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo Metropolitan College of Industrial Technology
  •  Estimation and diagnosis of accuracy of workpiece machined by simultaneous five-axis control

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Formation of Nanocrystalline Structure on the Metal Surface Layer and its Enhancement by Cutting-Frictional Stir Burnishing Combined ProcessPrincipal Investigator

    • Principal Investigator
      SASAHARA Hiroyuki
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Mechanically Functional Surface Generation by Cutting-FrictionStir Burnishing Combined ProcessPrincipal Investigator

    • Principal Investigator
      SASAHARA Hiroyuki
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Accuracy prediction of workpieces considering machine errors of multi-axis machine tools and its identification

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Effect of Single Crystal Nano-Structured Thin Layer on Nano-Surface Integrity

    • Principal Investigator
      FURUKAWA Yuji
    • Project Period (FY)
      2004 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  圧縮残留応力を生成する複合エンドミル加工法の開発とその解析的評価Principal Investigator

    • Principal Investigator
      笹原 弘之
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Identification and compensation of the deviations inherent to multi-axis machine tools

    • Principal Investigator
      TSUTSUMI Masaomi
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      National University Corporation Tokyo University of Agriculture and Technology
  •  MQL適用高能率ヘリカル送りエンドミル加工と環境インパクトの低減―穴加工・ねじ加工の高能率化と環境インパクトの低減―Principal Investigator

    • Principal Investigator
      笹原 弘之
    • Project Period (FY)
      2001 – 2002
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  高速エンドミル加工におけるMQLの効果とその解析的評価Principal Investigator

    • Principal Investigator
      笹原 弘之
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  間欠型オイルミスト潤滑の高速高能率エンドミル加工への適用とその解析的評価Principal Investigator

    • Principal Investigator
      笹原 弘之
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  バーチャルマシニングによる高硬度材の高速切削の評価システム開発に関する研究Principal Investigator

    • Principal Investigator
      笹原 弘之
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Virtual Machining of High Speed Mechining and Its Application to Machining System

    • Principal Investigator
      OBIKAWA Toshiyuki
    • Project Period (FY)
      1995 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Institute of Technology
  •  Development of Virtual Machining System for Obtaining "Know How" on Machining

    • Principal Investigator
      SHIRAKASHI Takahiro
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      TOKYO INSTITUTE OF TECHNOLOGY
  •  Study on the advanced evaluation system of the coating layrs

    • Principal Investigator
      OBIKAWA Toshiyuki
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      TOKYO INSTITUTE OF TECHNOLOGY
  •  Visualization and Use of machining know-how for Cutting Process Planning

    • Principal Investigator
      OBIKAWA Toshiyuki
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Tokyo Institute of Technology
  •  計算加工システムを利用した切削加工の最適作業設計に関する研究

    • Principal Investigator
      OBIKAWA Toshiyuki
    • Project Period (FY)
      1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Institute of Technology
  •  The Analytical Prediction of the Machined surface Characteristics and Their Improvement

    • Principal Investigator
      SHIRAKASHI Takahiro
    • Project Period (FY)
      1991 – 1993
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Institute of Technology
  •  On the Development of Expert System for Turning Operation

    • Principal Investigator
      USUI Eiji
    • Project Period (FY)
      1987 – 1989
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Tokyo Institute of Technology

All 2024 2023 2022 2021 2019 2018 2017 2016 2015 2014 2013 2010 2008 2007 2006 2005 2004 Other

All Journal Article Presentation

  • [Journal Article] Development of directed energy deposition strategy for a mechanically interlocked pure Ti and Al alloy component with cross-shaped internal pure Ti lattice2023

    • Author(s)
      Nagamatsu Hideaki、Abe Takeyuki、Nakajima Kentaro、Sasahara Hiroyuki
    • Journal Title

      Additive Manufacturing

      Volume: 78 Pages: 103895-103895

    • DOI

      10.1016/j.addma.2023.103895

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23K13230, KAKENHI-PROJECT-23K26010
  • [Journal Article] Improvement of Cooling Effect and Dimensional Accuracy of Wire and Arc Additive Manufactured Magnesium Alloy by Active-Cooling-Based Contacting Copper Blocks2022

    • Author(s)
      Nagamatsu Hideaki、Sasahara Hiroyuki
    • Journal Title

      Journal of Manufacturing and Materials Processing

      Volume: 6 Issue: 2 Pages: 27-48

    • DOI

      10.3390/jmmp6020027

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H02038, KAKENHI-PROJECT-20J11467
  • [Journal Article] Precise additive fabrication of wall structure on thin plate end with interlayer temperature monitoring2019

    • Author(s)
      TSURUMAKI Takenao、TSUKAMOTO Shinji、CHIBAHARA Hiroyuki、SASAHARA Hiroyuki
    • Journal Title

      JAMDSM

      Volume: 13 Issue: 2 Pages: JAMDSM0028-JAMDSM0028

    • DOI

      10.1299/jamdsm.2019jamdsm0028

    • NAID

      130007633725

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-16H04241
  • [Journal Article] Improvement of surface roughness with micro-axial vibration of spindle by pressure pulsation of grinding fluid supplied through inside of wheel2016

    • Author(s)
      K. Nomura, N. Takeuchi, A. Kusakabe, M. Chino and H. Sasahara
    • Journal Title

      Advanced Materials Research

      Volume: 806 Pages: 673-677

    • DOI

      10.4028/www.scientific.net/amr.1136.673

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Journal Article] Effect of coolant supplied through grinding wheel on residual stress of grinding surface2014

    • Author(s)
      Nagatoshi Nakatsuka, Yudai Hirai, Atushi Kusakabe, Yasuhiro Yao and Hiroyuki Sasahara,
    • Journal Title

      Advanced Materials Research

      Volume: 1017 Pages: 33-37

    • DOI

      10.4028/www.scientific.net/amr.1017.33

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Journal Article] Form accuracy of internal grinding of small and deep holes with coolant supplied from inner side of grinding wheel2014

    • Author(s)
      Kosaku Matsubara, Jun Tsuchimura, Shota Kawazoe and Hiroyuki Sasahara
    • Journal Title

      Advanced Materials Research

      Volume: 1017 Pages: 50-54

    • DOI

      10.4028/www.scientific.net/amr.1017.50

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Journal Article] Surface grinding of carbon fiber reinforced plastic (CFRP) with an internal coolant supplied through grinding wheel2014

    • Author(s)
      Hiroyuki Sasahara, Tomoko Kikuma, Rei Koyasu, Yasuhiro Yao
    • Journal Title

      Precision Engineering

      Volume: 38 Issue: 4 Pages: 775-782

    • DOI

      10.1016/j.precisioneng.2014.04.005

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Journal Article] パッチ分割切削法による任意三角形パッチ内への規則的表面模様形成2010

    • Author(s)
      福田理明, 笹原弘之, 松田礼, 堤正臣
    • Journal Title

      精密工学会誌 76巻1号

      Pages: 111-115

    • NAID

      130000302348

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Journal Article] パッチ分割切削法による任意三角形パッチ内への規則的表面模様形成2010

    • Author(s)
      福田理明, 笹原弘之, 松田礼, 堤正臣
    • Journal Title

      精密工学会誌 76巻

      Pages: 111-115

    • NAID

      130000302348

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Journal Article] Generation of Surface HardenedLayer on 0.45%C Steel by Frictional Stir Burnishing2008

    • Author(s)
      Hiroyuki Sasahara, Satoshi Kiuchi,Tomohiko Yata, Hiroyuki Murase, Keisuke,Tominaga
    • Journal Title

      Proc. GCMM 2008 CD-ROM #123

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Journal Article] Generation of Surface Hardened Layer on 0.45%C Steel by Frictional Stir Burnishing2008

    • Author(s)
      Hiroyuki Sasahara, SatoshiKiuchi, Tomohiko Yata, Hiroyuki Murase, KeisukeTominaga
    • Journal Title

      Proc. GCMM 2008

      Pages: 123-123

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Journal Article] 圧縮残留応力および表面硬化層を付与する複合切削工具2007

    • Author(s)
      笹原弘之
    • Journal Title

      型技術 22-13

      Pages: 72-75

    • NAID

      10026693064

    • Data Source
      KAKENHI-PROJECT-19360060
  • [Journal Article] 圧縮残留応力および表面硬化層を付与する複合切削工具2007

    • Author(s)
      笹原弘之
    • Journal Title

      型技術 22, 13

      Pages: 72-75

    • NAID

      10026693064

    • Data Source
      KAKENHI-PROJECT-19360060
  • [Journal Article] 355UVレーザによるSiC薄膜層のマイクロチャンネル創成2006

    • Author(s)
      中馬 健一朗, 角田 陽, 笹原 弘之, 古川 勇二
    • Journal Title

      2006年度精密工学会春季大会学術講演会講演論文集

      Pages: 1221-1222

    • NAID

      130005027199

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] 切削-バニシング複合加工工具の開発とその基本特性 -エンドミルタイプ複合加工工具の提案と加工表面への圧縮残留応力生成-2006

    • Author(s)
      瀬川俊明, 笹原弘之, 石川達郎, 村瀬寛恭, 堤正臣
    • Journal Title

      精密工学会誌 72・7

      Pages: 909-913

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 355 UVレーザによるSiC薄膜層のマイクロチャンネル創成2006

    • Author(s)
      中馬 健一朗, 角田 陽, 笹原 弘之, 古川 勇二
    • Journal Title

      2006年度精密工学会春季大会学術講演会講演論文集

      Pages: 1221-1222

    • NAID

      130005027199

    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] UVレーザによる石英ガラスの加工2006

    • Author(s)
      古市卓也, 笹原弘之, 古川勇二
    • Journal Title

      精密工学会春季大会学術講演会講演論文集 2006-3

      Pages: 1223-1224

    • NAID

      130005027200

    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Generation of micro channels onto SiC thin layer assisted by 355 nm UV laser2006

    • Author(s)
      K.Chuma, A.Kakuta, H.Sasahara, Y.Furukawa
    • Journal Title

      Proc.Jap.Soc.Prec.Eng.2006(Spring)

      Pages: 1221-1222

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] UVレーザによる石英ガラスの加工2006

    • Author(s)
      古市卓也, 笹原弘之, 古川勇二
    • Journal Title

      2006年度精密工学会春季大会学術講演会講演論文集

      Pages: 1223-1224

    • NAID

      130005027200

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Formation of Nanocrystalline Structure on the Surface Layer by Friction Stir Burnishing2006

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc. 6th Int. Conf. EUSPEN, Baden bei Wien

      Pages: 344-347

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質(第二報)-安定した厚いナノ結晶層の創成-2006

    • Author(s)
      矢田智彦, 笹原弘之, 村瀬寛恭, 富永啓介, 堤 正臣
    • Journal Title

      2006年度精密工学会秋季大会学術講演会講演論文集

      Pages: 891-892

    • NAID

      130004658406

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] A study on precise machining quarts glass assisted by UV laser2006

    • Author(s)
      T.Furuichi, H.Sasahara, Y.Fukukawa
    • Journal Title

      Proc.Jap.Soc.Prec.Eng.2006(Spring)

      Pages: 1223-1224

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Formation of Nanocrystalline Structure on the Surface Layer by Friction Stir Burnishing2006

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc.6th.Int.Conf.EUSPEN,Baden bei Wien

      Pages: 344-347

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質 (第二報)-安定した厚いナノ結晶層の創成-2006

    • Author(s)
      矢田智彦, 笹原弘之, 村瀬寛恭, 富永啓介, 堤 正臣
    • Journal Title

      2006年度精密工学会秋季大会学術講演会講演論文集

      Pages: 891-892

    • NAID

      130004658406

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Principle Factors Affecting on Sub Micro Grooving Mechanism of SiC Thin Layer by 355 nm UV Laser2006

    • Author(s)
      Y.Furukawa, H.Sasahara, A.Kakuta, K.Chuma
    • Journal Title

      Annals of the CIRP 54, No. 1

      Pages: 537-576

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Development of Cutting-Burnishing Combined Tool and Its Basic Performance -Compressive Residual Stress Generation within the Machined Surface by the End-mill Type Combined Tool-2006

    • Author(s)
      Toshiaki SEGAWA, Hiroyuki SASAHARA, Tasturo ISHIKAWA, Hiroyuki MURASE, Masaomi TSUTSUMI
    • Journal Title

      Journal of the Japan Society for Precision Engineering Vol.72

      Pages: 909-913

    • NAID

      110004744889

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 切削-バニシング複加工工具の開発とその基本特性-エンドミルタイプ複合加工工具の提案と加工表面への圧縮残留応力生成-2006

    • Author(s)
      瀬川俊明, 笹原弘之, 石川達郎, 村瀬寛恭, 堤正臣
    • Journal Title

      精密工学会誌 72・7

      Pages: 909-913

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing (2^<nd> report) - Formation of constant thick nanocrystalline structure-2006

    • Author(s)
      Tomohiko YATA, Hiroyuki SASAHARA, Hiroyuki MURASE, Keisuke TOMINAGA, Massaomi TSUTSUMI
    • Journal Title

      2006 JSPE Autumn Meeting

      Pages: 891-892

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Formation of Nanocrystalline Structure on the Surface Layer by Friction Stir Burnishing2006

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc. 6th Int.Conf.EUSPEN, Baden bei Wien

      Pages: 344-347

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Principle Factors Affecting on Sub Micro Grooving Mechanism of SiC Thin Layer by 355 nm UV Laser2006

    • Author(s)
      Y.Furukawa, H.Sasahara, A.Kakuta, K.Chuma
    • Journal Title

      Annals of the CIRP 54, No.1

      Pages: 537-576

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] 圧縮残留応力を生成する平面加工用複合加工工具の開発(第2報)-ピンの押し付け力とピンの材質が加工面に及ぼす影響-2005

    • Author(s)
      笹原弘之, 村瀬寛恭, 石川達郎, 矢田智彦, 瀬川俊明, 東海林斉, 千屋宏幸, 堤正臣
    • Journal Title

      2005年度精密工学会秋季大会学術講演会講演論文集

      Pages: 1181-1182

    • NAID

      130004656747

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing2005

    • Author(s)
      Tomohiko YATA, Hiroyuki SASAHARA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc 3rd Leading Edge Manufacturing 21st Century (LEM21), Nagoya

      Pages: 547-552

    • NAID

      130004656863

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing2005

    • Author(s)
      Hiroyuki SASAHARA, Tomohiko YATA, Hiroyuki MURASE, Toshiaki SEGAWA, Massaomi TSUTSUMI
    • Journal Title

      2005 JSPE Autumn Meeting

      Pages: 243-244

    • NAID

      130004656863

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 圧縮残留応力生成工具による加工表面の残留応力制御2005

    • Author(s)
      瀬川俊明, 笹原弘之 他
    • Journal Title

      精密工学会誌 71・4(掲載決定)

    • Data Source
      KAKENHI-PROJECT-15760075
  • [Journal Article] Surface Enhancement by Friction Stir Burnishing2005

    • Author(s)
      Tomohiko YATA, Hiroyuki SASAHARA, Toshiaki SEGAWA, Masaomi TSUTSUMI
    • Journal Title

      Proc 3rd Leading Edge Manufacturing 21st Century (LEM21),

      Pages: 547-552

    • NAID

      130004656863

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質2005

    • Author(s)
      笹原弘之, 矢田智彦, 村瀬寛恭, 瀬川俊明, 堤正臣
    • Journal Title

      2005年度精密工学会春季大会学術講演会講演論文集

      Pages: 243-244

    • NAID

      130004656863

    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] Development of a new tool for cutting-burnishing combined process to generate high compressive residual stress (2nd report)2005

    • Author(s)
      Hiroyuki SASAHARA, Hiroyuki MURASE, Tatsuro ISHIKAWA, Tomohiko YATA, Toshiaki SEGAWA, Hitoshi TOUKAIRIN, Hiroyuki CHIYA, Masaomi TSUTSUMI
    • Journal Title

      2005 JSPE Autumn Meeting

      Pages: 1181-1182

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] 摩擦攪拌形バニシング工具による表面改質2005

    • Author(s)
      笹原弘之, 矢田智彦, 村瀬寛恭, 瀬川俊明, 堤正臣
    • Journal Title

      2005年度精密工学会秋季大会学術講演会講演論文集

      Pages: 243-244

    • NAID

      130004656863

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17360058
  • [Journal Article] The Effect on Fatigue Life of Residual Stress and Surface Hardness resulting from Different Cutting Conditions of 0.45%C Steel2005

    • Author(s)
      Hiroyuki SASAHARA
    • Journal Title

      International Journal of Machine Tools and Manufacture 45, 2

      Pages: 131-136

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] The Effect on Fatigue Life of Residual Stress and Surface Hardness resulting from Different Cutting Conditions of 0.45%C Steel2005

    • Author(s)
      Hiroyuki SASAHARA
    • Journal Title

      International Journal of Machine Tools and Manufacture 45,2

      Pages: 131-136

    • Data Source
      KAKENHI-PROJECT-16206015
  • [Journal Article] Development of a New Tool to Generate Compressive Residual Stress within a Machined Surface2004

    • Author(s)
      Toshiaki SEGAWA, Hiroyuki SASAHARA他
    • Journal Title

      International Journal of Machine Tools and Manufacture 44・11

      Pages: 1215-1221

    • Data Source
      KAKENHI-PROJECT-15760075
  • [Journal Article] Control of the Mechanical Property on Machined Surface by a New Tool for cutting-burnishing combined process2004

    • Author(s)
      Toshiaki SEGAWA, Hiroyuki SASAHARA他
    • Journal Title

      ASME International Mechanical Engineering Congress, Anaheim, California USA IMECE2004-59641(CD-ROM)

    • Data Source
      KAKENHI-PROJECT-15760075
  • [Journal Article] 圧縮残留応力生成工具の開発とその基本特性2004

    • Author(s)
      瀬川俊明, 笹原弘之, 他
    • Journal Title

      精密工学会誌 70・6

      Pages: 853-857

    • NAID

      110001824013

    • Data Source
      KAKENHI-PROJECT-15760075
  • [Presentation] 純Ti-AZ31の異種金属積層における接合状態の基礎的調査2024

    • Author(s)
      太田祐斗, 永松秀朗, 笹原弘之
    • Organizer
      型技術者会議2024
    • Data Source
      KAKENHI-PROJECT-23K26010
  • [Presentation] ワイヤー+アーク積層造形法による異種アルミニウム合金の耐食性2023

    • Author(s)
      合田万智,笹原弘之,安齋弘樹,穴澤大樹
    • Organizer
      2023年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-23K26010
  • [Presentation] AZ31ビードオン純Tiプレートの溶接性の基礎的調査2023

    • Author(s)
      太田祐斗, 永松秀朗, 笹原弘之
    • Organizer
      2023年度精密工学会 第31回 学生会員卒業研究発表講演会
    • Data Source
      KAKENHI-PROJECT-23K26010
  • [Presentation] WAAMによるステンレス鋼と銅合金の異種金属造形における熱的異方性2023

    • Author(s)
      宮﨑智広,笹原弘之
    • Organizer
      2023年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-23K26010
  • [Presentation] ウィービングを用いたWAAMによるAl合金上への純Ti層の形成2023

    • Author(s)
      中島健太郎,永松秀朗,笹原弘之,阿部壮志
    • Organizer
      2023年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-23K26010
  • [Presentation] Microstructure and welding penetration of wire and arc additive manufactured Pure Titanium and A5356 dissimilar alloys using cold metal transfer welding2021

    • Author(s)
      H.Nagamatsu, H.Sasahara, T.Abe
    • Organizer
      euspen’s 21st International Conference & Exhibition
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H02038
  • [Presentation] Mechanical properties and joining state in wire and arc additive manufacturing of Al-Si/Mg-Al-Zn dissimilar alloys2021

    • Author(s)
      T.Shimada, H. Nagamatsu, T.Abe, .Kaneko, H.Sasahara
    • Organizer
      Leading edge manufacturing in 21st century, JSME
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H02038
  • [Presentation] ワイヤ+アーク放電によるアディティブ・マニュファクチャリングを用いたMg合金-Al合金積層におけるAl合金Si添加量の影響2021

    • Author(s)
      嶋田大祥,永松秀朗,阿部壮志,金子順一,笹原弘之
    • Organizer
      2021年度精密工学会 第28回学生会員卒業研究発表講演会
    • Data Source
      KAKENHI-PROJECT-19H02038
  • [Presentation] 構造的強度を有したTiとAl合金の異種金属積層法の開発2021

    • Author(s)
      中島健太郎,笹原弘之,永松秀朗,薄井雅俊,阿部壮志
    • Organizer
      精密工学会第29回学生会員卒業研究発表講演会
    • Data Source
      KAKENHI-PROJECT-19H02038
  • [Presentation] 銅ブロック補助材によるWAAM積層手法がAZ31積層壁の形状精度・積層能率・強制冷却に与える影響2021

    • Author(s)
      永松秀朗,笹原弘之,李俊霆,木下淳
    • Organizer
      2021年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-19H02038
  • [Presentation] ワイヤ+アーク方式の金属AMにおける温度と形状のモニタリングと造形へのフィードバック2019

    • Author(s)
      吉岡亨,笹原弘之,中野佑紀
    • Organizer
      2019年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-16H04241
  • [Presentation] Precise fabrication and cutting of wall structure to repair the thin end of plate using interlayer temperature monitoring on wire and arc-based additive manufacturing,2018

    • Author(s)
      T.Tsurumaki, S. Tsukamoto, H.Chibahara, H.Sasahara
    • Organizer
      ISFA2018
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H04241
  • [Presentation] Minimization of Thermal Distortion on Wire and Arc-based Additive Manufacturing on the Shaft2017

    • Author(s)
      T.Yoshioka, H. Sasahara
    • Organizer
      9th Int. Conf. on LEM21
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H04241
  • [Presentation] Precise Fabrication of Wall Structure onto Thin Plate End with Interlayer Temperature Monitoring on Wire and Arc-based Additive Manufacturing2017

    • Author(s)
      T.Tsurumaki,H.Chibahara, S.Tsukamoto, H.Sasahara
    • Organizer
      9th Int. Conf. on LEM21
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H04241
  • [Presentation] 砥石内研削液供給における研削熱の除去と加工面への影響2016

    • Author(s)
      平井由大,中塚永敏,日下部篤史,笹原弘之
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学(千葉県野田市)
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] 小径砥石における砥石内研削液供給の効果2016

    • Author(s)
      土村潤,松原光作,笹原弘之
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学(千葉県野田市)
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] 丸のこによるCFRP切断時の加工面特性と工具損傷2015

    • Author(s)
      笹原弘之,助川悠,山田洋平,楠富達仁
    • Organizer
      2015年度精密工学会秋季大会学術講演会
    • Place of Presentation
      東北大学(宮城県仙台市)
    • Year and Date
      2015-09-04
    • Data Source
      KAKENHI-PROJECT-26630021
  • [Presentation] Improvement of surface roughness with micro-axial vibration of spindle by pressure pulsation of grinding fluid supplied through inside of wheel2015

    • Author(s)
      K. Nomura, N. Takeuchi, A. Kusakabe, M. Chino and H. Sasahara
    • Organizer
      18th International Symposium on Advances in Abrasive Technology
    • Place of Presentation
      Jeju Island, Korea
    • Year and Date
      2015-10-05
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] 砥石内研削液供給機構を用いた難削材の研削加工-切込み量が加工特性に与える影響2014

    • Author(s)
      中江慶吾,中塚永敏,平井由大,笹原弘之
    • Organizer
      2014年度精密工学会秋季大会学術講演会
    • Place of Presentation
      東京大学(東京都文京区)
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] 砥石内研削液供給による研削加工時の残留応力に関する研究2014

    • Author(s)
      平井由大,中江慶吾,中塚永敏,笹原弘之
    • Organizer
      精密工学会第21回学生会員卒業研究発表講演会
    • Place of Presentation
      東京大学(東京都文京区)
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] 砥石内研削液供給による研削加工が残留応力に与える影響2013

    • Author(s)
      中江慶吾,平井由大,中塚永敏,日下部篤史,笹原弘之
    • Organizer
      2013年度精密工学会秋季大会学術講演会
    • Place of Presentation
      関西大学(大阪府吹田市)
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] The Effects of the Internal Coolant Supply through Grinding Wheel on the Grinding of CFRP2013

    • Author(s)
      Tomoko Kikuma, Rei Koyasu, Yasuhiro Yao and Hiroyuki Sasahara
    • Organizer
      The 5th International Conference of Asian Society for Precision Engineering and Nanotechnology
    • Place of Presentation
      台湾
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] ボールエンドミル切削痕の球面近似による仕上げ面凹凸模様の配列予測2010

    • Author(s)
      松田礼, 笹原弘之, 堤正臣
    • Organizer
      2010年度精密工学会春季大会学術講演会(239-240)
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] パッチ分割切削法による二重らせん工具経路を用いた周期的凹凸表面模様形成2010

    • Author(s)
      黒田耕介, 松田礼, 笹原弘之
    • Organizer
      型技術ワークショップ2010
    • Place of Presentation
      栃木県総合文化センター
    • Year and Date
      2010-11-17
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] パッチ分割切削法による多重周期的凹凸表面模様形成2010

    • Author(s)
      黒田耕介, 松田礼, 笹原弘之
    • Organizer
      2010年度精密工学会秋季大会学術講演会
    • Place of Presentation
      名古屋大学
    • Year and Date
      2010-09-28
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] Geometric Analysis of Surface Pattern by Spherical Approximation of Cutter Marks Array Generated with Ball-end Milling2010

    • Author(s)
      H.Matsuda, H.Sasahara, M.Tsutsumi
    • Organizer
      International Conference on Innovative Technologies IN-TECH 2010
    • Place of Presentation
      プラハ(チェコ共和国)
    • Year and Date
      2010-09-14
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] パッチ分割切削法による多重周期的凹凸表面模様形成2010

    • Author(s)
      黒田耕介, 松田礼, 笹原弘之
    • Organizer
      2010年度精密工学会秋季大会学術講演会(41-42)
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] パッチ分割切削法による二重らせん工具経路を用いた周期的凹凸表面模様形成2010

    • Author(s)
      黒田耕介, 松田礼, 笹原弘之
    • Organizer
      型技術ワークショップ2010(12-13)
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] ボールエンドミル切削痕の球面近似による仕上げ面凹凸模様の配列予測2010

    • Author(s)
      松田礼, 笹原弘之, 堤正臣
    • Organizer
      2010年度精密工学会春季大会学術講演会
    • Place of Presentation
      埼玉大学
    • Year and Date
      2010-03-18
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] Geometric Analysis of Surface Pattern by Spherical Approximation of Cutter Marks Array Generated with Ball-end Milling2010

    • Author(s)
      Hiroshi Matsuda, Hiroyuki Sasahara, Masaomi Tsutsumi
    • Organizer
      International Conference on Innovative Technologies IN-TECH 2010(342-345)
    • Data Source
      KAKENHI-PROJECT-21760105
  • [Presentation] 鉄鋼材料への摩擦攪拌形バニシング加工による表面強化~S45CおよびSUS304の比較~2008

    • Author(s)
      木内智, 笹原弘之
    • Organizer
      日本機械学会第7回生産加工・工作機械部門講演会
    • Place of Presentation
      岐阜
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Presentation] 鉄鋼材料への摩擦攬拌形バニシング加工による表面強化〜S45CおよびSUS304の比較〜2008

    • Author(s)
      木内智, 笹原弘之
    • Organizer
      日本機械学会 第7回生産加工・工作機械部門講演会
    • Place of Presentation
      岐阜
    • Year and Date
      2008-11-21
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Presentation] 摩擦攪拌形バニシングによる改質層の特性に及ぼす要因2008

    • Author(s)
      木内智, 笹原弘之
    • Organizer
      2008年度精密工学会秋大会学術講演会
    • Place of Presentation
      川崎
    • Year and Date
      2008-03-17
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Presentation] 摩擦攪拌形バニシング工具による表面改質(第3報)-改質層の特性・組織に及ぼす加工条件の影響-2007

    • Author(s)
      笹原弘之, 矢田智彦, 富永啓介, 木内智
    • Organizer
      2007年度精密工学会秋大会学術講演会
    • Place of Presentation
      旭川
    • Year and Date
      2007-09-12
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Presentation] 小径曲線切断丸のこの開発

    • Author(s)
      山田洋平,楠富達仁,笹原弘之
    • Organizer
      日本機械学会第10回生産加工・工作機械部門講演会
    • Place of Presentation
      徳島, 徳島大学
    • Year and Date
      2014-11-15 – 2014-11-16
    • Data Source
      KAKENHI-PROJECT-26630021
  • [Presentation] Curved-line cutting using flexible circular saw

    • Author(s)
      Yohei Yamada and Hiroyuki Sasahara
    • Organizer
      4th Int. Conf. EUSPEN
    • Place of Presentation
      Dubrovnik, Valamar Lacroma Hotel
    • Year and Date
      2014-06-02 – 2014-06-06
    • Data Source
      KAKENHI-PROJECT-26630021
  • [Presentation] Development of Multi-Axis Micro Sawing Machine for Free-Form Curves Cutting Using Flexible Circular Saw

    • Author(s)
      Yohei Yamada and Hiroyuki Sasahara
    • Organizer
      15th ICPE 2014
    • Place of Presentation
      Kanazawa, Hotel Nikko Kanazawa
    • Year and Date
      2014-07-23 – 2014-07-25
    • Data Source
      KAKENHI-PROJECT-26630021
  • [Presentation] Effect of coolant supplied through grinding wheel on residual stress of grinding surface

    • Author(s)
      Nagatoshi Nakatsuka, Yudai Hirai, Atushi Kusakabe, Yasuhiro Yao and Hiroyuki Sasahara
    • Organizer
      17th International Symposium on Advances in Abrasive Technology
    • Place of Presentation
      Courtyard by Marriott, Hawaii island, U.S.A.
    • Year and Date
      2014-09-23 – 2014-09-25
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] 砥石内研削液供給機構を用いた小径深穴内面の研削加工の形状精度

    • Author(s)
      松原光作,土村潤,川添将太,笹原弘之
    • Organizer
      日本機械学会2014年度年次大会
    • Place of Presentation
      東京電機大学,東京
    • Year and Date
      2014-09-08 – 2014-09-10
    • Data Source
      KAKENHI-PROJECT-25289012
  • [Presentation] Form accuracy of internal grinding of small and deep holes with coolant supplied from inner side of grinding wheel

    • Author(s)
      Kosaku Matsubara, Jun Tsuchimura, Shota Kawazoe and Hiroyuki Sasahara
    • Organizer
      17th International Symposium on Advances in Abrasive Technology
    • Place of Presentation
      Courtyard by Marriott, Hawaii island, U.S.A.
    • Year and Date
      2014-09-23 – 2014-09-25
    • Data Source
      KAKENHI-PROJECT-25289012
  • 1.  NAKAMOTO Keiichi (90379339)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 0 results
  • 2.  OBIKAWA Toshiyuki (70134830)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 3.  SHIRAKASHI Takahiro (50016440)
    # of Collaborated Projects: 7 results
    # of Collaborated Products: 0 results
  • 4.  TSUTSUMI Masaomi (90108217)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 16 results
  • 5.  MATSUMURA Takashi (20199855)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 6.  RYUTA Sato (60376861)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 2 results
  • 7.  SAITO Akinori (10334476)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  YOSHINO Masahiko (40201032)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 9.  SHINOZUKA Jun (30282841)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 10.  阿部 壮志 (60756469)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 5 results
  • 11.  MATSUDA Hiroshi (30469580)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 10 results
  • 12.  IWAMOTO Kaoru (50408712)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  KANAZAWA Kenichi (30169544)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  FURUKAWA Yuji (10087190)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 7 results
  • 15.  MIN Yan (90240142)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  KAKUTA Akira (60224359)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 5 results
  • 17.  USUI Eiji (20016299)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  IHARA Tohru (80134831)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  TAKEUCHI Yoshimi (50107546)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  韓 玉傑 (80372457)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  永松 秀朗 (80964791)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 22.  KIUCHI Satoshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 6 results
  • 23.  KUBO Toshihiro
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  YAGYU Hidenori
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 25.  YAO Yasuhiro
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 26.  YAMADA Yohei
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 27.  YAMAMOTO Yasunori
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi