• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Morimoto Yoshitaka  森本 喜隆

… Alternative Names

MORIMOTO Yoshitaka  森本 喜隆

森本 義隆  モリモト ヨシタカ

Less
Researcher Number 00290734
Other IDs
  • ORCIDhttps://orcid.org/0000-0002-8400-8741
Affiliation (Current) 2025: 金沢工業大学, 工学部, 教授
Affiliation (based on the past Project Information) *help 2024: 金沢工業大学, 工学部, 教授
2011 – 2022: 金沢工業大学, 工学部, 教授
2001 – 2003: 宇都宮大学, 工学部, 助教授
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Except Principal Investigator
Basic Section 18020:Manufacturing and production engineering-related / Production engineering/Processing studies / 機械工作・生産工学
Keywords
Principal Investigator
非円形加工 / 工作機械 / CNC旋盤 / 軸心位置制御 / 電磁力 / 軌跡制御 / 外乱オブザーバ / 章動運動 / 歳差運動 / 主軸 … More / 駆動型ロータリー工具 / 慣性力抑制 / CFRP製テーブル / 5軸同期制御 / ロータリー工具 / 繰返し制御 / 3次元曲面 / 機械工作・生産工学 / 振動制御 / 駆動形ロータリ工具 / リニアモータ駆動 / 三次元曲面 / ラインレーザーセンサ / 繰り返し誤差補償 / 同期制御 / 焼入れ鋼 / 旋削加工 / 磁気研磨 / 機上測定 / 駆動形ロータリー工具 / 国際情報交換 / Linear motor / High acceleration / CNC lathe / Non-axisyimmetric turnig / CAM … More
Except Principal Investigator
ニオブチタン合金 / 微細加工 / 高能率加工 / 合金組織 / 難加工性 / 低弾性率 / ダイヤモンド工具 / ハイブリッド加工 / ヘール仕上げ / 駆動型ロータリ加工 / スラント型回転軸 / 非直交回転軸 / 5軸工作機械 / 加工スペース / 運動学 / 5軸工作機械 / 多軸工作機械 / 形状創成理論 / インプラント / 高能率化 / ロータリーヘール加工 / チタニウム合金 / 切削機構 / ヘール加工 / 駆動型ロータリー工具 / 生体適合性 / バインダレスナノダイヤモンド焼結体 / レーザー刃先処理 / Grinding Performance / Surface Roughness / Grinding Force / Grinding ratio / Fracture Strength / CBN Grinding Wheel / Direct Transformation / New Polycrystalline CBN Abrasive / 研削加工 / ナノ結晶体 / cBN砥粒 / 研削性能 / 仕上面粗さ / 研削抵抗 / 研削比 / 破壊強度 / CBNホイール / 直接転換法 / ナノ結晶体CBN / 超弾塑性β型チタニウム合金材料 / 表面変質層 / 人工歯根 / 超弾塑性β型チタニウム合金 / クラックレス / ポリ乳酸 / 切削工具 / ナノ構造 / 高純度cBN Less
  • Research Projects

    (11 results)
  • Research Products

    (47 results)
  • Co-Researchers

    (12 People)
  •  骨に近いニオブチタン合金を対象としたハイブリッド型ロータリヘール加工技術の構築

    • Principal Investigator
      加藤 秀治
    • Project Period (FY)
      2024 – 2026
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Kanazawa Institute of Technology
  •  Development of highly efficient machining technology for niobium-titanium alloys with low elastic modulus similar to bone

    • Principal Investigator
      Kato Hideharu
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Kanazawa Institute of Technology
  •  Development of structure analysis simulator for multi-axis machine tool and efficient structure optimization

    • Principal Investigator
      Takasugi Keigo
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Kanazawa University
  •  Creation of non-circular and non-axisymmetric inner cylinder machining method by controlling the axis' center position of the machine tool spindlePrincipal Investigator

    • Principal Investigator
      Morimoto Yoshitaka
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Kanazawa Institute of Technology
  •  Construction of microfabrication technology for niobium titanium alloy with low elastic modulus similar to bone

    • Principal Investigator
      Kato Hideharu
    • Project Period (FY)
      2017 – 2019
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kanazawa Institute of Technology
  •  Development of Turning and Polishing System for Non-axisymmetric 3D surfacesPrincipal Investigator

    • Principal Investigator
      Morimoto Yoshitaka
    • Project Period (FY)
      2015 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kanazawa Institute of Technology
  •  Construction of the micro milling of super elasto-plastic beta type titanium alloy which has a young's modulus near bone

    • Principal Investigator
      Kato Hideharu
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kanazawa Institute of Technology
  •  Realization of 3D surface machining by turningPrincipal Investigator

    • Principal Investigator
      MORIMOTO Yoshitaka
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kanazawa Institute of Technology
  •  Construction of the crack-less maicro-cutting technology of the biodegradable polylactic acid material used for a medical-application fixture

    • Principal Investigator
      KATO HIDEHARU
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kanazawa Institute of Technology
  •  ナノ構造立方晶窒化ほう素の高圧合成と超精密切削用工具の試作

    • Principal Investigator
      ICHIDA Yoshio
    • Project Period (FY)
      2002 – 2003
    • Research Category
      Grant-in-Aid for Exploratory Research
    • Research Field
      機械工作・生産工学
    • Research Institution
      Utsunomiya University
  •  The development of Nanocrystalline cBN Abrasives and Their Application to Grinding

    • Principal Investigator
      ICHIDA Yoshio
    • Project Period (FY)
      2001 – 2003
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Utsunomiya University

All 2022 2021 2019 2018 2017 2016 2015 2014 2013 2012 2011 Other

All Journal Article Presentation Patent

  • [Journal Article] Development of Desktop CNC Lathe with Pipe Frame Structure2019

    • Author(s)
      鈴木直彦,森本喜隆,金子義幸,廣崎憲一,岡﨑祐一
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 85 Issue: 2 Pages: 189-196

    • DOI

      10.2493/jjspe.85.189

    • NAID

      130007590764

    • ISSN
      0912-0289, 1882-675X
    • Year and Date
      2019-02-05
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Journal Article] A Study on Positioning Control of a Moving Table by Real-Time Identification of Dynamic Characteristics2019

    • Author(s)
      森本喜隆,熊谷恵介,向井達也,林晃生
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 85 Issue: 1 Pages: 113-118

    • DOI

      10.2493/jjspe.85.113

    • NAID

      130007542959

    • ISSN
      0912-0289, 1882-675X
    • Year and Date
      2019-01-05
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Journal Article] Improvement of machining accuracy for 3D surface machining with CNC lathe2018

    • Author(s)
      Keigo Takasugi, Yoshitaka Morimoto, Yoshiyuki Kaneko, Naohiko Suzuki,Naoki Asakawa
    • Journal Title

      JAMDSM

      Volume: 12 Issue: 4 Pages: JAMDSM0089-JAMDSM0089

    • DOI

      10.1299/jamdsm.2018jamdsm0089

    • NAID

      130007458214

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Journal Article] Development of Four-Axis 3D Printer with Fused Deposition Modeling Technology2017

    • Author(s)
      Kyosuke Kawagishi, Shoma Umetani, Ken Tanaka, Eiji Ametani, Yoshitaka Morimoto, and Keigo Takasugi
    • Journal Title

      International Journal of Automation Technology

      Volume: 11 Issue: 2 Pages: 278-286

    • DOI

      10.20965/ijat.2017.p0278

    • NAID

      130007505970

    • ISSN
      1881-7629, 1883-8022
    • Year and Date
      2017-03-05
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Journal Article] Thermal Deformation Control of a Pipe Structure Frame CNC lathe2017

    • Author(s)
      鈴木 直彦、森本 喜隆、金子 義幸、廣崎 憲一、岡崎 祐一
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 83 Issue: 5 Pages: 453-459

    • DOI

      10.2493/jjspe.83.453

    • NAID

      130005645830

    • ISSN
      0912-0289, 1882-675X
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Journal Article] Development of a CNC lathe with tandem moving table for high speed turning (Evaluation of high-speed motion and effect of vibration transmission suppression)2015

    • Author(s)
      森本喜隆,高杉敬吾,吉村史也,長谷川陽,鈴木 直彦,金子義幸
    • Journal Title

      Transactions of the JSME (in Japanese)

      Volume: 81 Issue: 832 Pages: 15-00290-15-00290

    • DOI

      10.1299/transjsme.15-00290

    • NAID

      130005118090

    • ISSN
      2187-9761
    • Language
      Japanese
    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Journal Article] Study on High-Efficiency Finish Turning of Carbunized Hardened Steel with Driven Rotary Cuttig2014

    • Author(s)
      Hideharu Kato, Yoshirtaka Morimoto
    • Journal Title

      International Journal of Automation Technology

      Volume: 7-3 Pages: 321-328

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] 光学部品用金型加工向け超精密5軸加工機の開発2014

    • Author(s)
      廣瀬智博,森本喜隆
    • Journal Title

      精密工学会誌

      Volume: 80,2 Pages: 177-182

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] 旋削加工による三次元曲面の創製2013

    • Author(s)
      森本喜隆
    • Journal Title

      日本機械学会論文集

      Volume: 79-804 Pages: 276-288

    • NAID

      130005031958

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Study on High-Efficiency Finish Turning of Carburized Hardened Steel with Driven Rotary Cutting2013

    • Author(s)
      Hideharu KATO, Yoshitaka MORIMOTO
    • Journal Title

      Int. J. of Automation Technology

      Volume: Vol.7, No.3

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Machining of Non- axisymmetric Curved Surface by Lathe Turning2013

    • Author(s)
      Yoshitaka MORIMOTO, Katsuhiro Nakagaki, Hideharu KATO
    • Journal Title

      Proceedings of 2013 ASME IMECE, IMECE2013-63317

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] 旋削加工による三次元曲面の創製(ロータリ工具を用いた旋削加工法の提案)2013

    • Author(s)
      森本喜隆,加藤秀治,榎本宗一郎,森山貴幸他
    • Journal Title

      日本機械学会論文集(C編)

      Volume: Vol.79, No.804 Pages: 276-288

    • NAID

      130003375161

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Machining of Non-axisymmetric Curved Surface by Lathe Turning2013

    • Author(s)
      Yoshitaka Morimoto
    • Journal Title

      Proceedings of 2013 ASME IMECE

      Volume: IMECE2013-63317 Pages: 1-7

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Accuracy Evaluation of 5-axis Machining Center Based on Measurement Results of Machined Workpiece2012

    • Author(s)
      Y. MORIMOTO, K. Nakato, M.Gontani
    • Journal Title

      International Journal of Automation Technology

      Volume: 6 Pages: 675-681

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Creation of Curved Surface by Lathe Turning2012

    • Author(s)
      Y. Morimoto, S. Emoto, T. Moriyama, H. Katoa, K. Nakagakib, N. Suzukib, Y. Kanekob, M. Isobeb
    • Journal Title

      Procedia CIRP

      Volume: 1 Pages: 114-119

    • DOI

      10.1016/j.procir.2012.04.018

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Vibration Control of CNC Lathe with Pipe Structure Frame2012

    • Author(s)
      森本喜隆,鈴木直彦,金子義幸,磯部稔,廣崎憲一,岡崎祐一
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 78 Issue: 5 Pages: 420-425

    • DOI

      10.2493/jjspe.78.420

    • NAID

      130002122254

    • ISSN
      0912-0289, 1882-675X
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Creation of Curved Surface by Lathe Turning2012

    • Author(s)
      Yoshitaka MORIMOTO, Katsuhiro Nakagaki, Hideharu KATO
    • Journal Title

      Procedia CIRP

      Volume: Vol.1 Pages: 114-119

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Development of linear- motor-driven NC table for high-speed Machining of 3d Surface by Lathe Turning2012

    • Author(s)
      Yoshitaka MORIMOTO, Katsuhiro Nakagaki, Hideharu KATO
    • Journal Title

      Procedia CIRP

      Volume: Vol.1 Pages: 271-276

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Development of Linear-Motor-Driven Nc Table for High-Speed Machining of 3d Surface by Lathe Turning2012

    • Author(s)
      Y. Morimoto, T. Moriyama, S. Emoto, H. Saito, K. Nakagaki, Y. Kaneko., M. Isobe
    • Journal Title

      Procedia CIRP

      Volume: 1 Pages: 271-276

    • DOI

      10.1016/j.procir.2012.04.049

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Study on Accuracy Evaluation of Machining Center Based on Measurement Results of Machined Workpiece2011

    • Author(s)
      Yoshitaka Morimoto, Keisuke Nakato, Motoshi Gontani
    • Journal Title

      Proceedings of the LEM21 International Conference on Leading Edge Manufacturing in 21st Century

      Volume: 1 Pages: 3311-3311

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Journal Article] Positioning performance of moving table with reducer unitPositioning performance of moving table with reducer unit2011

    • Author(s)
      Yoshitaka Morimoto
    • Journal Title

      SICE Annual Conference 2011

      Volume: PR0001/11 Pages: 417-422

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Patent] NC旋盤及びこれを用いた切削加工方法2017

    • Inventor(s)
      森本喜隆
    • Industrial Property Rights Holder
      森本喜隆
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2017-024453
    • Filing Date
      2017-02-13
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Patent] 旋削による非円形加工方法2013

    • Inventor(s)
      森本喜隆
    • Industrial Property Rights Holder
      森本喜隆
    • Industrial Property Rights Type
      特許
    • Acquisition Date
      2013-11-22
    • Overseas
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Patent] 工作機械の加工制御方法2013

    • Inventor(s)
      森本喜隆
    • Industrial Property Rights Holder
      森本喜隆
    • Industrial Property Rights Type
      特許
    • Filing Date
      2013-04-04
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Patent] 旋削による非円形加工方法2012

    • Inventor(s)
      森本喜隆
    • Industrial Property Rights Holder
      森本喜隆
    • Industrial Property Rights Type
      特許
    • Filing Date
      2012-04-12
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Patent] 工作機械の加工制御方法2011

    • Inventor(s)
      森本喜隆
    • Industrial Property Rights Holder
      森本喜隆
    • Industrial Property Number
      2011-201017
    • Filing Date
      2011
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Presentation] 軸心位置アクティブ 制御型主軸の開発2022

    • Author(s)
      岡部元紀,森本喜隆
    • Organizer
      2022年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-20K04215
  • [Presentation] Development of machine tool spindle with active spindle center position control2022

    • Author(s)
      Motoki Okabe, Yuya Akiho, Masayuki Obata, Akio Hayashi, Yoshitaka Morimoto
    • Organizer
      euspen’s 22 nd International Conference & Exhibition
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-20K04215
  • [Presentation] Active center position control of machine tool spindle2021

    • Author(s)
      Yuya Akiho,Yoshitaka Morimoto
    • Organizer
      The 10th International Conference on leading Edge Manufacturing in 21st Century
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-20K04215
  • [Presentation] 軸心位置アクティブ制御型主軸の開発2021

    • Author(s)
      秋保裕矢,森本喜隆
    • Organizer
      日本機械学会北陸信越支部第58期総会・講演会
    • Data Source
      KAKENHI-PROJECT-20K04215
  • [Presentation] A Study on Improvement of Reversing motion by Frictional Force Compensation of an NC Moving Table2018

    • Author(s)
      Tatsuya Mukai, Yoshitaka Morimoto, Akio Hayashi
    • Organizer
      International Conference on Precision Engineering
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Study On Turning Of Non-Axisymmetric Three-Dimensional Curved Surfaces2018

    • Author(s)
      Taichi Mori ,Yoshitaka Morimoto ,Akio Hayashi , Yoshiyuki Kaneko,Naohiko Suzuki,Ryo Hirono
    • Organizer
      American Society of Mechanical Engineers
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Development of 5-Axis 3D Printer with Fused Deposition Modeling Technology2018

    • Author(s)
      Hikaru Nishikawa, Yoshitaka Morimoto, Akio Hayashi
    • Organizer
      International Symposium on Flexible Automation
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Vibration Control of Computer Numerically Controlled Lathe With CFRP Pipe Frame2017

    • Author(s)
      MORIMOTO YOSHITAKA, YAMADA HONOKA, SAWATANI KAZUKI, SUZUKI NAOHIKO
    • Organizer
      ASME 2017 12th International Manufacturing Science and Engineering Conference
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Improvement of Transfer Technology for Flexible Bands2017

    • Author(s)
      YAMASHITA MASAHIRO, MORIMOTO YOSHITAKA, HAYASHI AKIO, NAKAGAKI KATSUYOSI
    • Organizer
      the 9th International Conference on Leading Edge Manufacturing in 21st Century
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] タンデムテーブル型 4 軸同期制御CNC 旋盤の開発-応答性 の評価-2017

    • Author(s)
      長谷川陽,森本喜隆
    • Organizer
      精密工学会
    • Place of Presentation
      慶應義塾大学
    • Year and Date
      2017-03-14
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Development of Optimized ToolPath Generation Method for to Reduce Energy Consumption of 5-Axis Machine Tool2017

    • Author(s)
      OKAMI YOSHIKI,MORIMOTO YOSHITAKA, HAYASHI AKIO, TAKASUGI KEIGO
    • Organizer
      the 9th International Conference on Leading Edge Manufacturing in 21st Century
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Magnetic abrasive finishing of non-axisymmetric curved surfaces using rotating magnetic tool2016

    • Author(s)
      Max Stein, Greenslet Hitomi Yamaguchi, Yoshitaka Morimoto
    • Organizer
      International Symposium on Flexible Automation
    • Place of Presentation
      USA Cleveland
    • Year and Date
      2016-08-01
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Development of a tandem-table-type CNC lathe with four-axis synchronized control2016

    • Author(s)
      Akira Hasegawa, Yoshitaka Morimoto
    • Organizer
      International Symposium on Flexible Automation
    • Place of Presentation
      USA Cleveland
    • Year and Date
      2016-08-01
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Development of CAM system for 3D surface machining with CNC lathe - Improvement of machining accuracy with onmachine mesurement -2015

    • Author(s)
      Keigo Takasugi, Yoshitaka Morimoto, Naohiko Suzuki, Yoshiyuki Kaneko
    • Organizer
      The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
    • Place of Presentation
      Kyoto Research Park
    • Year and Date
      2015-10-19
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] 非円形旋削加工用機上計測システムの開発2015

    • Author(s)
      高杉敬吾,森本喜隆,中垣勝敬
    • Organizer
      2015 年度日本機械学会年次大会
    • Place of Presentation
      北海道大学
    • Year and Date
      2015-09-14
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Development of a CNC lathe with tandem moving table for high speed turning (Evaluation of high-speed motion and effect of vibration transmission suppression)2015

    • Author(s)
      Yoshitaka Morimoto, Keigo Takasugi, Fumiya Yoshimura, Akira Hasegawa, Naohiko Suzuki, Yoshiyuki Kaneko
    • Organizer
      The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
    • Place of Presentation
      Kyoto Research Park
    • Year and Date
      2015-10-19
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15H03905
  • [Presentation] Creation of Curved Surface by Lathe Turning2012

    • Author(s)
      Yoshitaka MORIMOTO, Takayuki Moriyama, Hideharu KATO
    • Organizer
      5th CIRP Conference on High Performance Cutting 2012
    • Place of Presentation
      Swiss ETH Zürich
    • Year and Date
      2012-06-04
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Presentation] Development of linear- motor-driven NC table for high-speed Machining of 3d Surface by Lathe Turning2012

    • Author(s)
      Yoshitaka MORIMOTO, Soichiro Emoto, Hideharu KATO
    • Organizer
      5th CIRP Conference on High Performance Cutting 2012
    • Place of Presentation
      Swiss ETH Zürich
    • Year and Date
      2012-06-04
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Presentation] 旋削加工による3次元曲面の実現2011

    • Author(s)
      森本喜隆,榎本宗一郎,森山貴幸,金子義幸,中垣勝敬
    • Organizer
      2011年度精密工学会周期学術講演会
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Presentation] 工作機械用パイプフレーム構造の開発-振動制御の適用-2011

    • Author(s)
      森本喜隆,鈴木直彦,金子義幸,磯部稔,廣崎憲一,岡崎祐一
    • Organizer
      2011年度精密工学会周期学術講演会
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-23560139
  • [Presentation] Machining of Non-axisymmetric Curved Surface by Lathe Turning

    • Author(s)
      Yoshitaka Morimoto
    • Organizer
      ASME
    • Place of Presentation
      USA San diego
    • Data Source
      KAKENHI-PROJECT-23560139
  • 1.  KATO Hideharu (90278101)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 11 results
  • 2.  SHINTANI Kazuhiro (80139758)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 0 results
  • 3.  ICHIDA Yoshio (50091939)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 4.  SATO Ryunosuke (20312861)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  Takasugi Keigo (80710235)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 4 results
  • 6.  林 晃生 (50734430)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 6 results
  • 7.  OHSAWA Satoshi (50259636)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 8.  池永 訓昭 (30512371)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 9.  浅川 直紀 (50231874)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  大島 政英 (70233103)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  坂本 重彦 (00315285)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  GREENSLET Hitomi Yamaguchi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results

URL: 

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi