OGAWA Fumio 小川文男

… Alternative Names

Ogawa Fumio 小川文男

Less

Researcher Number	00424812
Other IDs
Affiliation (Current)	2025: 東北大学, 未来科学技術共同研究センター, 学術研究員
Affiliation (based on the past Project Information) *help	2023: 東北大学, 未来科学技術共同研究センター, 学術研究員 2021 – 2022: 東北大学, 工学研究科, 助教 2017 – 2020: 立命館大学, 理工学部, 助教
Review Section/Research Field	Principal Investigator Basic Section 28030:Nanomaterials-related / Materials/Mechanics of materials Except Principal Investigator Basic Section 64030:Environmental materials and recycle technology-related / Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 疲労特性 / 撚糸 / 織物複合材料 / 複合材料 / 設計 / 織物 / カーボンナノチューブ / 機械材料・材料力学 / ミニチュア試験 / クリープ疲労 … More / 疲労 / 非鉛はんだ / 材料試験 / はんだ材料 / クリープ / 多軸疲労 … More Except Principal Investigator 凹凸構造 / 固体蓄電体 / 持続可能社会 / 再生可能エネルギー / 木質バイオマス / 固体量子蓄電体 / セルロースナノファイバー / 強度評価 / 多軸負荷 / 寿命評価 / 材料強度 / 金属疲労 Less

Preparation of quantum solid-state capacitors using cellulose nanofibers and their applications to the development of environment-conscious social systems
- Principal Investigator
  
  橋田俊之
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 64030:Environmental materials and recycle technology-related
- Research Institution
  Tohoku University
Development of innovative carbon nanotube fabrics and their composites aiming the appearance of superior fatigue propertiesPrincipal Investigator
- Principal Investigator
  
  Ogawa Fumio
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 28030:Nanomaterials-related
- Research Institution
  Tohoku University
Experimental Verification of Fatigue Strength Properties under Non-proportional Multiaxial Variable Loading and Improvement of Fatigue Strength Evaluation Method
- Principal Investigator
  
  Itoh Takamoto
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Ritsumeikan University
Elucidation of the effect of added elements on non-proportional fatigue properties of lead-free solders and development of models for lifetime evaluationPrincipal Investigator
- Principal Investigator
  
  Ogawa Fumio
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Ritsumeikan University

All 2020 2019 2018 2017

All Journal Article Presentation

[Journal Article] Investigation of fatigue strength under wide-ranged biaxial stress for two types of stainless steel using a thin-walled hollow cylinder specimen2020
- Author(s)
  Shunsuke Saito, Fumio Ogawa, Takamoto Itoh
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 136 Pages: 105611-105611
- DOI
  10.1016/j.ijfatigue.2020.105611
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562, KAKENHI-PROJECT-18K03854
[Journal Article] Creep Damage Evaluation using Uniaxial Miniature Specimens for Multiaxially Damaged Components2019
- Author(s)
  Rui Kosaka, Fumio Ogawa, Takamoto Itoh, Masao Sakane
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 300 Pages: 07003-07003
- DOI
  10.1051/matecconf/201930007003
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Multiaxial fatigue strength under non-proportional loading of additively manufactured notched components of Ti-6Al-4V2019
- Author(s)
  Stefano Bressan, Javad Razavi, Fumio Ogawa, Takamoto Itoh, Filippo Berto
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 300 Pages: 03005-03005
- DOI
  10.1051/matecconf/201930003005
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading2019
- Author(s)
  Bressan Stefano、Ogawa Fumio、Itoh Takamoto、Berto Filippo
- Journal Title
  
  Frattura ed Integrita' Strutturale
  
  Volume: 13 Issue: 48 Pages: 18-25
- DOI
  10.3221/igf-esis.48.03
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-17K14562
[Journal Article] Evaluation of Multiaxial Creep-fatigue Strength for High Chromium Steel under Non-proportional Loading2019
- Author(s)
  Yuuki Kasamuta, Fumio Ogawa, Takamoto Itoh, Hiroyasu Tanigawa
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 300 Pages: 07002-07002
- DOI
  10.1051/matecconf/201930007002
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Evaluation of the low-cycle fatigue strength of Sn3.0Ag0.5Cu solder at 313 and 353 K using a small specimen2019
- Author(s)
  Ogawa Fumio、Hiyoshi Noritake、Itoh Takamoto
- Journal Title
  
  Materials Testing
  
  Volume: 61 Issue: 8 Pages: 719-723
- DOI
  10.3139/120.111376
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-17K14562
[Journal Article] Bending and Torsion Fatigue-Testing Machine Developed for Multiaxial Non-Proportional Loading2019
- Author(s)
  Ogawa Fumio、Shimizu Yusuke、Bressan Stefano、Morishita Takahiro、Itoh Takamoto
- Journal Title
  
  Metals
  
  Volume: 9 Issue: 10 Pages: 1115-1115
- DOI
  10.3390/met9101115
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-18H05256, KAKENHI-PROJECT-17K14562
[Journal Article] Evaluation of Non-proportional Multiaxial Fatigue Strength of Lead-free Solder with Elements Addition2019
- Author(s)
  Keiwa Makino, Fumio Ogawa, Takamoto Itoh
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 300 Pages: 12004-12004
- DOI
  10.1051/matecconf/201930012004
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Fatigue life properties of stainless steels in wide ranged biaxial stress state2019
- Author(s)
  Shunsuke Saito, Fumio Ogawa, Takamoto Itoh
- Journal Title
  
  Key Engineering Materials
  
  Volume: 795 Pages: 60-65
- DOI
  10.4028/www.scientific.net/kem.795.60
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Cyclic plastic behavior of additively manufactured Ti-6Al-4V under uniaxial and multiaxial non-proportional loading2019
- Author(s)
  Bressan Stefano、Ogawa Fumio、Itoh Takamoto、Berto Filippo
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 126 Pages: 155-164
- DOI
  10.1016/j.ijfatigue.2019.05.003
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-18H05256, KAKENHI-PROJECT-17K14562
[Journal Article] Study on Creep Damage Assessment Method for Mod. 9Cr-1Mo Steel by Sampling Creep Testing with Thin Plate Specimen2019
- Author(s)
  Hideyuki Kanayama, Noritake Hiyoshi, Fumio Ogawa, Mie Kawabata, Takamoto Itoh, Takashi Wakai
- Journal Title
  
  Journal of the Society of Materials Science, Japan
  
  Volume: 68 Issue: 5 Pages: 421-428
- DOI
  10.2472/jsms.68.421
- NAID
  130007651369
- ISSN
  0514-5163, 1880-7488
- Year and Date
  2019-05-15
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Fatigue Life Properties of Stainless Steels in Wide Ranged Biaxial Stress States using a Hollow Cylinder Specimen2019
- Author(s)
  Shunsuke Saito, Fumio Ogawa, Takamoto Itoh
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 300 Pages: 09004-09004
- DOI
  10.1051/matecconf/201930009004
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Thermal conductivity and tensile properties of carbon nanofiber-reinforced aluminum-matrix composites fabricated via powder metallurgy: Effects of ball-milling and extrusion conditions on microstructures and resultant composite properties2019
- Author(s)
  Fumio Ogawa, Shuji Yamamoto, Chitoshi Masuda
- Journal Title
  
  Acta Metallurgica Sinica (English Journal)
  
  Volume: 32 Issue: 5 Pages: 573-584
- DOI
  10.1007/s40195-018-0811-8
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Influence of notch sensitivity and crack initiation site on low cycle fatigue life of notched components under multiaxial non-proportional loading2019
- Author(s)
  Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto
- Journal Title
  
  Fracture and Structural Integrity
  
  Volume: 47 Issue: 47 Pages: 126-140
- DOI
  10.3221/igf-esis.47.10
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Production of hollow germanium alloy quasi-spheres through a coaxial nozzle2019
- Author(s)
  Kunal D. Bhagat, Truong V Vu, John C. Wells, Hideyuki Takakura, Yu Kawano, Fumio Ogawa
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 58 Issue: 6 Pages: 068001-068001
- DOI
  10.7567/1347-4065/ab1b59
- NAID
  210000155808
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Fatigue testing and evaluation of fatigue strength under multiaxial stress state; Why do we need fatigue testing?2018
- Author(s)
  Takamoto Itoh, Fumio Ogawa, Takahiro Morishita
- Journal Title
  
  MATEC Web of Conferences
  
  Volume: 159 Pages: 01050-01050
- DOI
  10.1051/matecconf/201815901050
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562, KAKENHI-PROJECT-15K05698
[Journal Article] Low-Cycle Fatigue Testing Using a Small Specimen of Sn-58Bi Solder at 313K and 353K2018
- Author(s)
  Ogawa Fumio、Hiyoshi Noritake、Konishi Yutaka、Itoh Takamoto
- Journal Title
  
  Journal of Electronic Materials
  
  Volume: 48 Issue: 3 Pages: 1777-1784
- DOI
  10.1007/s11664-018-06871-3
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-17K14562
[Journal Article] Multiaxial fatigue properties of stainless steel under seven loading paths consisting of cyclic inner pressure and push-pull loading2018
- Author(s)
  Morishita Takahiro、Takada Yuta、Ogawa Fumio、Hiyoshi Noritake、Itoh Takamoto
- Journal Title
  
  Theoretical and Applied Fracture Mechanics
  
  Volume: 96 Pages: 387-397
- DOI
  10.1016/j.tafmec.2018.05.015
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-18H05256, KAKENHI-PROJECT-17K14562
[Journal Article] Strong, ductile, and thermally conductive carbon nanotube-reinforced aluminum matrix composites fabricated by ball-milling and hot extrusion of powders encapsulated in aluminum containers2018
- Author(s)
  Fumio Ogawa, Shuji Yamamoto, Chitoshi Masuda
- Journal Title
  
  Materials Science and Engineering: A
  
  Volume: 711 Pages: 460-469
- DOI
  10.1016/j.msea.2017.11.077
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Evaluation of multiaxial low cycle fatigue cracks in Sn-8Zn-3Bi solder under non-proportional loading2018
- Author(s)
  Fumio Ogawa, Takamoto Itoh, Takaei Yamamoto
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 110 Pages: 215-224
- DOI
  10.1016/j.ijfatigue.2018.01.021
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562, KAKENHI-PROJECT-15K05698, KAKENHI-PROJECT-18K03854
[Journal Article] In situ chemical vapor deposition of metals on vapor-grown carbon fibers and fabrication of aluminum-matrix composites reinforced by coated fibers2018
- Author(s)
  Fumio Ogawa, Chitoshi Masuda, Hidetoshi Fujii
- Journal Title
  
  Journal of Materials Science
  
  Volume: 53 Issue: 7 Pages: 5036-5050
- DOI
  10.1007/s10853-017-1921-9
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Effect of additional elements on the low-cycle-fatigue characteristics of Sn-1.0Ag-0.7Cu solder obtained using a miniature-sized specimen2018
- Author(s)
  Hideyuki Kanayama, Yutaka Konishi, Fumio Ogawa, Takamoto Itoh, Masao Sakane, Mitsuo Yamashita, Hiroaki Hokazono
- Journal Title
  
  International Journal of Fatigue
  
  Volume: 116 Pages: 180-191
- DOI
  10.1016/j.ijfatigue.2018.06.023
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K06068, KAKENHI-PROJECT-18K03854, KAKENHI-PROJECT-17K14562
[Journal Article] Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition2017
- Author(s)
  Takahiro Morishita, Fumio Ogawa, Takamoto Itoh
- Journal Title
  
  Fracture and structural integrity
  
  Volume: 41 Issue: 41 Pages: 45-53
- DOI
  10.3221/igf-esis.41.07
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-17K14562
[Journal Article] Eighth International Conference on Low Cycle Fatigueに参加して2017
- Author(s)
  小川文男
- Journal Title
  
  材料
  
  Volume: 66 Pages: 868-868
- NAID
  130006922194
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Evaluation of Creep-fatigue Properties for Mod.9Cr-1Mo Steel under Proportional and Non-Proportional Loading2019
- Author(s)
  Kotaro Fukuike, Fumio Ogawa, Noritake Hiyoshi, Takamoto Itoh
- Organizer
  10th Japan-China Bilateral Symposium on High Temperature Strength of Materials
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] 改良9Cr-1Mo鋼の高温クリープ疲労特性 (クリープ破損機構の検討)2019
- Author(s)
  小川文男, 福池晃太郎, 旭吉雅健，伊藤隆基
- Organizer
  日本機械学会材料力学部門若手シンポジウム, 2019
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Multiaxial Creep-fatigue Failure Mode for High Chromium Steel Considering Interaction of Creep Damage and Loading Non-proportionality2019
- Author(s)
  Yuki Kasamuta, Fumio Ogawa, Takamoto Itoh, Hiroyasu Tanigawa, Takashi Nozawa
- Organizer
  10th Japan-China Bilateral Symposium on High Temperature Strength of Materials
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Evaluation of creep-fatigue properties of F82H steel by considering interaction of non-proportional loading and relaxation2018
- Author(s)
  Yuuki Kasamuta, Fumio Ogawa, Yuuya Murakami, Takamoto Itoh, Hiroyasu Tanigawa
- Organizer
  6th International Conference on Advanced Steels (ICAS 2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Carbon nanotube-reinforced aluminum matrix composites fabricated by hot extrusion of ball-milled powders encapsulated in aluminum containers2017
- Author(s)
  Fumio Ogawa
- Organizer
  5th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications, SIPS 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Nanocarbon-reinforced metal matrix composites toward low carbon society2017
- Author(s)
  Fumio Ogawa
- Organizer
  Nanotechnology Workshop, Taiwan Nanotechnology Industry Development Association
- Invited
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Low cycle fatigue properties of lead-free solders acquired small sized specimen2017
- Author(s)
  Fumio Ogawa
- Organizer
  8th International Conference on Low Cycle Fatigue
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562
[Presentation] Deposition of metals on vapor grown carbon fibers via in-situ chemical vapor deposition and fabrication of metal matrix composites utilizing coated fibers2017
- Author(s)
  Fumio Ogawa
- Organizer
  5th Intl. Symp. on Composite, Ceramic and Nano Materials Processing, Characterization and Applications, SIPS 2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-17K14562

1. Itoh Takamoto (40242581)

# of Collaborated Projects: 1 results

# of Collaborated Products: 7 results
2. 坂根政男 (20111130)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
3. 橋田俊之 (40180814)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
4. 福原幹夫 (30400401)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

OGAWA Fumio 小川 文男

Ogawa Fumio 小川 文男

Research Projects

Research Products

Co-Researchers

Preparation of quantum solid-state capacitors using cellulose nanofibers and their applications to the development of environment-conscious social systems

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of innovative carbon nanotube fabrics and their composites aiming the appearance of superior fatigue propertiesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Experimental Verification of Fatigue Strength Properties under Non-proportional Multiaxial Variable Loading and Improvement of Fatigue Strength Evaluation Method

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Elucidation of the effect of added elements on non-proportional fatigue properties of lead-free solders and development of models for lifetime evaluationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Investigation of fatigue strength under wide-ranged biaxial stress for two types of stainless steel using a thin-walled hollow cylinder specimen2020

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Creep Damage Evaluation using Uniaxial Miniature Specimens for Multiaxially Damaged Components2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Multiaxial fatigue strength under non-proportional loading of additively manufactured notched components of Ti-6Al-4V2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of Multiaxial Creep-fatigue Strength for High Chromium Steel under Non-proportional Loading2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of the low-cycle fatigue strength of Sn3.0Ag0.5Cu solder at 313 and 353 K using a small specimen2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Bending and Torsion Fatigue-Testing Machine Developed for Multiaxial Non-Proportional Loading2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Evaluation of Non-proportional Multiaxial Fatigue Strength of Lead-free Solder with Elements Addition2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Fatigue life properties of stainless steels in wide ranged biaxial stress state2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Cyclic plastic behavior of additively manufactured Ti-6Al-4V under uniaxial and multiaxial non-proportional loading2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Study on Creep Damage Assessment Method for Mod. 9Cr-1Mo Steel by Sampling Creep Testing with Thin Plate Specimen2019

OGAWA Fumio 小川文男

Ogawa Fumio 小川文男