• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

OHASHI Kazuhito  大橋 一仁

ORCIDConnect your ORCID iD *help
Researcher Number 10223918
Other IDs
External Links
Affiliation (Current) 2022: 岡山大学, 自然科学学域, 教授
Affiliation (based on the past Project Information) *help 2021: 岡山大学, 自然科学学域, 教授
2015 – 2020: 岡山大学, 自然科学研究科, 教授
2011 – 2014: 岡山大学, 自然科学研究科, 准教授
2013: 岡山大学, 大学院自然科学研究科, 准教授
2007 – 2010: Okayama University, The Graduate Sch. of Natural Seience and Technology, Associate Professor … More
2006: Okayama University, The graduate school of Natural Science & Technology, Associate Professor, 大学院自然科学研究科, 助教授
2005 – 2006: 岡山大学, 大学院・自然科学研究科, 助教授
2004: Okayama University, Faculty of Engineering, Associate Professor, 工学部, 助教授
2003: 岡山大学, 工学部, 教授
2000: Department of Engineering, OKAYAMA UNIVERSITY, Research Associate, 工学部, 助手
1995 – 1999: 岡山大学, 大学院・自然科学研究科, 助手
1997: 岡山大学, 大学院自然科学研究科, 助手
1990 – 1994: 岡山大学, 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / 機械工作・生産工学 / Basic Section 18020:Manufacturing and production engineering-related
Except Principal Investigator
機械工作・生産工学 / 機械工作 / Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Keywords
Principal Investigator
表面粗さ / 研削加工 / 脆弱化層 / 線形破壊力学 / 影響領域係数 / キャビテーション / 目づまり / 超精密切削 / 送り速度 / surface roughness … More / 研削 / ファインセラミックス / 単粒研削 / クラック / ダイヤモンド切れ刃 / 窒化けい素 / 円弧形切削 / 破壊じん性値 / 成形ダイヤモンド切れ刃 / 切削・研削加工 / マイクロ砥粒加工 / 砥粒加工 / スラリ / ノズル / CFD / 加工量 / スラリー / 加工精度 / 衝撃力 / 材料除去量 / ダイヤモンド砥石 / チップポケット / レジノイドボンド / カーボン / 目詰まり / 砥粒突出高さ / 硬質カーボン / 粘着テープ / 総形ダイヤモンド砥石 / ダイヤモンド砥粒 / 静電場 / 砥粒密度 / シミュレーション / 静電気 / Al-Mg合金 / 単結晶ダイヤモンドバイト / 仕上面あらさ / 結晶粒界段差 / ECP法 / 逃げ角 / 残留応力 / 単石ダイヤモンドバイト / ultraprecision cutting / Ai-Mg alloy / mono-crystallin diamond tool / surface finish / grain boundary / ECP / relief angle / residual stress / 異方超弾性材料 / ダイヤモンドバイト / 形状誤差 / 切削熱 / 熱膨張係数 / 温度上昇 / Ultraprecision cutting / Anisotropic super-elastic alloy / Diamond tool / Geometrical accuracy / Cutting heat / Coefficient of thermal expansion / Feed rate / 遊離砥粒 / 吸引キャビテーション流 / 内面 / ガラス / ナノメートル / マスク / マイクロファブリケーション / 超精密 / 研磨加工 / 遊離微粉砥粒 / 形状精度 / 砥粒濃度 / キャビテーション衝撃圧力 / loose abrasive grain / cavitation / internal / glass / nano meter / mask / micro patterning / インプロセス測定 / 熱電対 / 円筒研削 / 研削熱 / 温度変化 / In-process measurement / thermocouple / cylindrical grinding / grinding heat / 炭素繊維強化プラスチック / 砥石寿命 / ドライアイス / CFRP / カーボン繊維 / ドライ加工 / ドライ / 超精密研削 / 単結晶SiC / 損失正接 / じん性 / 研削面粗さ / 半導体 / ウエハ / 研削砥石 / 結合剤 / SiC / 粘弾性 … More
Except Principal Investigator
研削加工 / 表面粗さ / 微小電場 / 砥石作用面 / 研削抵抗 / サイアロン / 切れ刃形状 / 構成刃先 / 超精密研削 / 加工面創成機構 / 輪郭研削 / 熱変形量 / 熱変形速度制御加工法 / 形状精度 / 超精密加工 / 表面創成機構 / 表面硬度 / grinding machining / condition optimization / 円弧形切削 / ダイヤモンド単粒 / 上すべり現象 / 加工変質層 / 研削クラック / クラック深さ / 極低速度研削加工 / 砥石摩耗 / 硬度 / 層状組織 / 特異現象 / ファインセラミックス / 研削加工変質層 / 窒化ケイ素 / クラック / 背分力 / シリカ / 予見ファジィ / 知的自動化 / 学習機能 / ニューラルネットワーク / インプロセスセンシング / 加工メカニズム / 電場 / 研削砥石 / 加工精度 / 精密加工 / 砥粒 / シミュレーション / トポグラフィ / プロフィル / 円筒研削 / 内面研削 / 工作物熱変形 / シミュレーション解析 / 寸法精度 / インプロセス測定 / 研削現象 / 熱変形 / 超硬 / 電着ダイヤモンド砥石 / 研削抵抗分布 / 砥石作用面性状 / 切りくず付着 / 正面研削 / ダイヤモンド電着砥石 / 高能率研削 / 縦軸正面研削 / 寸法生成機構 / 切残し量 / 実研削量 / レジノイド砥石 / ドレッシング / 移動熱源 / YAGレーザ / 砥粒支持剛性 / 研削性能 / アルミ粉混入レジノイド砥石 / 高能率・高精度研削加工 / 切れ刃先端位置 / チップポケット / 砥粒保持強度 / アルミニウム粉混入レジノイド砥石 / YAGレ-ザ / 砥石寿命 / Resinoid bond wheel / Grinding / Dressing / Moving heat source / YAG laser / Stiffness of grain mounting / Grinding characteristic / 遊離微粉砥粒 / 精密吸引加工 / キャリア / 絞り / キャビテーション効果 / クリアランス効果 / 砥粒数効果 / 吸引加工 / クリアランス / ultraprecision grinding / micro loose abrasive grain / sucking machining / carrier / restrictor / cavitation / clearance / grain number / 表面活性化現象 / 超精密切りくず / super-precision / activate surface phenomenon / very small electric field / tool condition / workpiece condition / relative movement condition / 熱変形速度 / インプロセスオンライン / 実寸法生成速度 / 超精密研削機構 / new grinding technique / thermal deformation of workpiece / predict system / size error of workpiece / In-process prediction system / 環境技術 / 機械工作・生産工学 / 材料加工・処理 / Environmental Technology / Industrial Engineering / Machining Process / 円筒トラバース研削 / 長尺工作物 / 振れ止め / 弾性変形 / テーパ形状 / 形状誤差 / 連続体モデル Less
  • Research Projects

    (29 results)
  • Research Products

    (108 results)
  • Co-Researchers

    (7 People)
  •  次世代半導体材料の超精密研削における砥石結合剤の粘弾性の効果Principal Investigator

    • Principal Investigator
      大橋 一仁
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Okayama University
  •  Study of optimization of steady rest in cylindrical traverse grinding

    • Principal Investigator
      大西 孝
    • Project Period (FY)
      2020 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Okayama University
  •  High Efficiency and High Quality Dry Grinding of Carbon Fiber Reinforced PlasticPrincipal Investigator

    • Principal Investigator
      Ohashi Kazuhito
    • Project Period (FY)
      2017 – 2019
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Development of precision control of distribution in abrasive density for next-generation single layered super abrasive grinding wheelPrincipal Investigator

    • Principal Investigator
      Ohashi Kazuhito
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Development of cup type grinding wheel for cemented carbaide feature of deep depth of cut compare to cutting and anti grazing

    • Principal Investigator
      FUJIWARA Takanori
    • Project Period (FY)
      2014 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Development of functional micro chip-pockets on fine-graded diamond wheelPrincipal Investigator

    • Principal Investigator
      OHASHI Kazuhito
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Development of a simulation system of workpiece thermal deformation in grinding process

    • Principal Investigator
      TSUKAMOTO Shinya
    • Project Period (FY)
      2011 – 2013
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  吸引キャビテーション流を利用する水晶ウエハの超精密三次元マイクロ砥粒加工法の開発Principal Investigator

    • Principal Investigator
      OHASHI Kazuhito
    • Project Period (FY)
      2008 – 2010
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Development of Rapid In-process Measurement of Surface Roughness for In-line Total Check of Surface QualityPrincipal Investigator

    • Principal Investigator
      OHASHI Kazuhito
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Developments of the ultimate machining process for realization of ecology

    • Principal Investigator
      TSUKAMOTO Shinya
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Development of Cavitation Aided Ultra-precision Surface Finishing Technique of 3-dimentional Curved holePrincipal Investigator

    • Principal Investigator
      OHASHI Kazuhito
    • Project Period (FY)
      2003 – 2004
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Okayama University
  •  Ultraprecision Cutting Process of Anisotropic Super-elastic AlloyPrincipal Investigator

    • Principal Investigator
      OHASHI Kazuhito
    • Project Period (FY)
      1999 – 2000
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      OKAYAMA UNIVERSITY
  •  Development of thermal deformation speed controlled super precision grinding

    • Principal Investigator
      TSUKAMOTO Sinya
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      OKAYAMA UNIVERSITY
  •  Super-precision machining using of activate surface phenomenon on the very small electric field

    • Principal Investigator
      NAKAJIMA Toshikatsu
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  Ultraprecision Cutting of Functional MaterialsPrincipal Investigator

    • Principal Investigator
      OHASHI Kazuhito
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  超精密研削加工を実現するための基盤技術に関する研究

    • Principal Investigator
      塚本 真也
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  微小電場における表面活性化現象と超精密加工面創成過程の研究

    • Principal Investigator
      中島 利勝
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  硬脆材料の研削加工における除去形態と脆弱化層の生成機構に関する研究Principal Investigator

    • Principal Investigator
      大橋 一仁
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  微小電場による表面活性化現象を利用した超精密研削加工の研究

    • Principal Investigator
      中島 利勝
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  ファインセラミックスの研削加工による脆弱化層の生成機構とその定量化の研究Principal Investigator

    • Principal Investigator
      大橋 一仁
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for Encouragement of Young Scientists (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  精密輪郭研削加工の形状生成過程における熱変形速度制御加工法の開発

    • Principal Investigator
      塚本 真也
    • Project Period (FY)
      1995
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  Ultraprecision Grinding Technique of Fine Ceramics with Micro Loose Diamond Grain

    • Principal Investigator
      NAKAJIMA Toshikatsu
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama university
  •  極微小電場を利用した微粉砥石による超精密研削加工の研究

    • Principal Investigator
      中島 利勝
    • Project Period (FY)
      1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  硬脆材料の砥粒微粉による超精密加工に関する基礎的研究

    • Principal Investigator
      塚本 眞也
    • Project Period (FY)
      1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  研削加工の知的自動化に関する研究

    • Principal Investigator
      中島 利勝
    • Project Period (FY)
      1993
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Okayama University
  •  極低速度研削加工における特異現象の発生機構に関する研究

    • Principal Investigator
      塚本 眞也
    • Project Period (FY)
      1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Okayama University
  •  ファインセラミックスの研削加工変質層の生成機構に関する研究

    • Principal Investigator
      中島 利勝
    • Project Period (FY)
      1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Okayama University
  •  Production of Aluminium Powdered Poreless Elastic Wheel and Development of Dressing Techniques with Moving Heat Source

    • Principal Investigator
      NAKAJIMA Toshikatsu
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Okayama University
  •  サイアロンの精密成形研削加工と加工変質層の生成機構に関する研究

    • Principal Investigator
      NAKAJIMA Toshikatsu
    • Project Period (FY)
      1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      機械工作
    • Research Institution
      Okayama University

All 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Other

All Journal Article Presentation Book Patent

  • [Book] 図解 砥粒加工技術のすべて2006

    • Author(s)
      塚本眞也, 大橋一仁
    • Total Pages
      234
    • Publisher
      工業調査会
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Improvement of form accuracy in cylindrical traverse grinding with steady rest by controlling traverse speed2021

    • Author(s)
      FUJII Hidetaka, ONISHI Takashi, LIN Chinhu, SAKAKURA Moriaki, OHASHI Kazuhito
    • Journal Title

      Journal of Advanced Mechanical Design, Systems, and Manufacturing

      Volume: 15 Issue: 4 Pages: JAMDSM0049-JAMDSM0049

    • DOI

      10.1299/jamdsm.2021jamdsm0049

    • NAID

      130008059247

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-20K04194
  • [Journal Article] Effect of Viscoelasticity of Thermoplastic Resin Bonded Wheel on Ultra-Precision Grinding of SiC Wafers2021

    • Author(s)
      H. Sakamoto, Y. Fukushima, K. Sakai, H. Kodama, K. Ohashi
    • Journal Title

      Proceedings of 23rd International Symposium on Advances in Abrasive Technology

      Pages: 193-198

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20K04193
  • [Journal Article] Thermal Influence on Surface Layer of Carbon Fiber Reinforced Plastic (CFRP) in Grinding2020

    • Author(s)
      Hiroyuki Kodama, Shingo Okazaki, Yifan Jiang, Hiroyuki Yoden, Kazuhito Ohashi
    • Journal Title

      Precision Engineering

      Volume: -

    • DOI

      10.1016/j.precisioneng.2020.04.005

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Journal Article] Influence of Grinding Temperature on Surface Quality of CFRP2019

    • Author(s)
      Shingo OKAZAKI, Yifan JIANG, Hiroyuki KODAMA, Hiroyuki YODEN, Kazuhito OHASHI
    • Journal Title

      Proceedings of 22nd International Symposium on Advances in Abrasive Technology (ISAAT2019)

      Volume: - Pages: 1-6

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Journal Article] Influence of Grinding Atmosphere on Grinding Characteristics of CFRP2018

    • Author(s)
      Shingo Okazaki, Yifan Jiang, Hiroyuki Kodama, Hiroyuki Yoden and Kazuhito Ohashi
    • Journal Title

      Proceedings of the 2018 International Conference on Machining, Materials and Mechanical Technologies (IC3MT 2018)

      Volume: 1 Pages: 105-109

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Journal Article] Recovery of Grindactivity by Dry Ice Blasting on Micro-Grit Diamond wheel in dry Grinding of Carbon2017

    • Author(s)
      Yuto Katayama, Yuki Ohta, Hiroyuki Kodama, Kazuhito Ohashi
    • Journal Title

      Proceedings of the 20th International Symposium on Advances in Abrasive Technology

      Volume: 1 Pages: 76-80

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Journal Article] Control of Setting Abrasive Grains on Single-layered Metal Bond Diamond Forming Wheel Using Electrostatic Field2016

    • Author(s)
      S. Watanabe, K. Ohashi, Y. Kakuda, S. Tsukamoto
    • Journal Title

      Proceedings of 19th International Symposium on Advances in Abrasive Technology

      Volume: Vol. 1 Pages: 36-41

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26420050
  • [Journal Article] Study on Grinding Force Distribution on Cup Type Electroplated Diamond Wheel in Face Grinding of Cemented Carbide2014

    • Author(s)
      Takanori Fujiwara, Shinya Tsukamoto, Kazuhito Ohashi and Takashi Onishi
    • Journal Title

      Advances in Abrasive Technology XVII, Advanced Material Research, Trans Tech Publications, p 9-14

      Volume: 1017 Pages: 9-14

    • DOI

      10.4028/www.scientific.net/amr.1017.9

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-26420051
  • [Journal Article] Grinding System Reducing the Influence of Thermal Deformation of Workpiece in Cylindrical Grinding2013

    • Author(s)
      Takashi Onishi, Moriaki Sakakura, Naoki Sato, Takuya Kodani, Kazuhito Ohashi and Shinya Tsukamoto
    • Journal Title

      Advanced Materials Research

      Volume: vol.797 Pages: 609-612

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Journal Article] Fundamental Study on Setting of Diamond Abrasive Grains Using Electrostatic Force for Single-Layered Metal Bond Wheel2012

    • Author(s)
      K. Ohashi, Y. Kawasuji, Y. Shinji, Y. Samejima, S. Ogawa and S. Tsukamoto
    • Journal Title

      Advanced Materials Research

      Volume: Vols. 565 Pages: 40-45

    • Data Source
      KAKENHI-PROJECT-23560126
  • [Journal Article] Temperature distribution in a workpiece during cylindrical plunge grinding2012

    • Author(s)
      Moriaki Sakakura, Takashi Onishi, Takayuki Shinoda, Kazuhito Ohashi, Shinya Tsukamoto, Ichiro Inasaki
    • Journal Title

      Production Engineering

      Volume: Vol.6, No.2 Pages: 149-155

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Journal Article] Fundamental Study on Setting of Diamond Abrasive Grains Using Electrostatic Force for Single-Layered Metal Bond Wheel2012

    • Author(s)
      K. Ohashi
    • Journal Title

      Advanced Materials Research

      Volume: 565 Pages: 40-45

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Journal Article] 円筒プランジ研削における工作物表面温度のインプロセス測定結果を用いた熱変形量の予測システムの開発砥2011

    • Author(s)
      大西孝,坂倉守昭,佐伯哲也,谷村賢彦,和田洋平,大橋一仁,塚本真也
    • Journal Title

      粒加工学会誌

      Volume: 55巻,7号 Pages: 418-423

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Journal Article] カーボンの乾式研削における目づまり砥石のドレスレス切れ味回復法─第2報:目づまり砥石の切れ味回復効果─2011

    • Author(s)
      大橋一仁
    • Journal Title

      砥粒加工学会誌

      Volume: 55巻 Pages: 284-289

    • NAID

      10027989875

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Journal Article] 円筒プランジ研削における工作物表面温度のインプロセス測定結果を用いた熱変形量の予測システムの開発2011

    • Author(s)
      大西 孝,坂倉守昭,佐伯哲弥,谷村賢彦,和田洋平,大橋一仁,塚本真也
    • Journal Title

      砥粒加工学会誌

      Volume: 55巻7号 Pages: 418-423

    • NAID

      10029268002

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Journal Article] カーボンの乾式研削における目づまり砥石のドレスレス切れ味回復法─第2報:目づまり砥石の切れ味回復効果─2011

    • Author(s)
      大橋一仁、大西孝、藤田裕也、住元洋輔、塚本真也
    • Journal Title

      砥粒加工学会誌

      Volume: Vol.55、No.5 Pages: 284-289

    • NAID

      10027989875

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Journal Article] Study on Cavitation Aided Abrasive Machining on Glass2009

    • Author(s)
      K.Ohashi
    • Journal Title

      Key Engineering Materials 407-408

      Pages: 654-657

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Journal Article] Fundamental Study on the Precision Abrasive Machining Using a Cavitation in Reversing Suction Flow2009

    • Author(s)
      K.Ohashi, R.J.Wang, H.Hasegawa, S.Tsukamoto
    • Journal Title

      Key Engineering Materials Vols.389-390

      Pages: 223-228

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Journal Article] Fundamental Study on the Precision Abrasive Machining Using a Cavitation in Reversing Suction Flow2009

    • Author(s)
      K. Ohashi
    • Journal Title

      Key Engineering Materials 389-390

      Pages: 223-228

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Journal Article] Fundamental Study on the Precision Abrasive Machining Using a Cavitation in Reversing Suction Flow2009

    • Author(s)
      K.Ohashi
    • Journal Title

      Key Engineering Materials 389-390

      Pages: 223-228

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Journal Article] Study on Cavitation Aided Abrasive Machining on Glass2009

    • Author(s)
      K.Ohashi, S.Tsukamoto, T.Nakajima
    • Journal Title

      Key Engineering Materials Vols.407-408

      Pages: 654-657

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Journal Article] Novel On-Machine Measurement of Surface Finish with Thermoelectric Effect for Rotating Ground Workpiece2007

    • Author(s)
      K. OHASHI
    • Journal Title

      Proceedings of Precision Grinding and Abrasive Technology at. SME International Grinding Conference

      Pages: 519-526

    • Description
      「研究成果報告書概要(和文)」より
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560106
  • [Journal Article] Novel On-Machine Measurement of Surface Finish with Thermoelectric Effect for Rotating Ground Workpiece2007

    • Author(s)
      K., OHASHI
    • Journal Title

      Proceedings of Precision Grinding and Abrasive Technology at SME International Grinding Conference

      Pages: 519-526

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-18560106
  • [Journal Article] Novel On-Machine Measurement of Surface Finish with Thermoelectric Effect for Rotating Ground Workpiece2007

    • Author(s)
      K. OHASHI
    • Journal Title

      Proceedings of Precision Grinding and Abrasive Technology at SME International Grinding Conference

      Pages: 519-526

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18560106
  • [Journal Article] Improvement of Machining Accuracy in Micro Cylindrical Traverse Grinding2006

    • Author(s)
      K.Ohashi
    • Journal Title

      Key Engineering Materials Vol. 329

      Pages: 39-44

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Improvement of Machining Accuracy in Micro Cylindrical Traverse Grinding2006

    • Author(s)
      K.Ohashi
    • Journal Title

      Key Engineering Materials Vol.329

      Pages: 39-44

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Improvement of Machining Accuracy in Micro Cyclindrical Traverse Grinding2006

    • Author(s)
      K.Ohashi, G.He, S.Tsukamoto
    • Journal Title

      Key Engineering Materials Vol.329

      Pages: 39-44

    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Thermal deformation of grinding wheel and workpiece in internal oscillation grinding process of deep hole2006

    • Author(s)
      K.Ohashi
    • Journal Title

      Journal of the Japan Society for Abrasive Technology Vol.50(7)

      Pages: 409-414

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] 内面研削における電気防錆加工法の開発-加工液に水のみを使用するエコマシニングの提案2006

    • Author(s)
      西川尚宏, 大橋一仁, 吉原啓太, 塚本眞也
    • Journal Title

      環境技術 35巻,6号

      Pages: 452-459

    • NAID

      10019161056

    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] 電気防錆水中保管法の開発-防錆材・油剤を使わない水による金属部品保管法の提案2006

    • Author(s)
      西川尚宏, 大橋一仁, 須藤将仁, 塚本眞也
    • Journal Title

      環境技術 35巻,5号

      Pages: 371-377

    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] 深穴内面オシレーション研削における砥石と工作物の熱変形挙動2006

    • Author(s)
      大橋一仁, 何桂馥, 小野祐一郎, 塚本真也, 中島利勝
    • Journal Title

      砥粒加工学会誌 50巻,7号

      Pages: 409-414

    • NAID

      10018146050

    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] 深穴内面オシレーション研削における砥石と工作物の熱変形挙動2006

    • Author(s)
      大橋一仁
    • Journal Title

      砥粒加工学会誌 50巻, 7号

      Pages: 409-414

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] 吸引キャビテーション流を用いたマイクロ加工法2005

    • Author(s)
      大橋一仁
    • Journal Title

      2005年度精密工学会春季大会学術講演会講演論文集 (印刷中)

    • NAID

      130004657921

    • Data Source
      KAKENHI-PROJECT-15560097
  • [Journal Article] Cavitation Aided Micro Machining2005

    • Author(s)
      K.Ohashi
    • Journal Title

      Proceedings of 2005 JSPE Annual meeting

      Pages: 1308-1309

    • NAID

      130004657921

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15560097
  • [Journal Article] 吸引キャビテーション流を用いたマイクロ加工法2005

    • Author(s)
      大橋一仁
    • Journal Title

      2005年度精密工学会春季大会学術講演会講演論文集

      Pages: 1308-1309

    • NAID

      130004657921

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560097
  • [Journal Article] Application of Cavitation Aided Machining to Micro Patterning of Glass2005

    • Author(s)
      K.Ohashi
    • Journal Title

      Proceedings of The 20th Annual ASPE Meeting

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Application of Cavitation Aided Machining to Micro Patterning of Glass2005

    • Author(s)
      K.Ohashi
    • Journal Title

      Proceedings of The 20th Annual ASPE Meeting (CDROM)

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Application of Cavitation Aided Machining to Micro Patterning of Glass2005

    • Author(s)
      K.Ohashi
    • Journal Title

      Proceedings of The 20th Annual ASPS Meeting

    • Data Source
      KAKENHI-PROJECT-17560097
  • [Journal Article] Minimizing Process of Surface Roughness in Grinding with Super-soft Grade Resinoid Wheel2004

    • Author(s)
      K.Ohashi
    • Journal Title

      Proceedings of The 7th International Conference on Progress of Machining Technology

      Pages: 122-127

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15560097
  • [Patent] 表面処理方法及びその装置2010

    • Inventor(s)
      大橋一仁, 塚本眞也, 長谷川裕之
    • Industrial Property Rights Holder
      国立大学法人岡山大学
    • Filing Date
      2010-03-09
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Patent] 表面処理方法及びその装置2010

    • Inventor(s)
      大橋一仁
    • Industrial Property Rights Holder
      岡山大学
    • Filing Date
      2010-05-04
    • Overseas
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Patent] 表面処理方法及びその装置2010

    • Inventor(s)
      大橋一仁, 塚本眞也, 長谷川裕之
    • Industrial Property Rights Holder
      国立大学法人岡山大学
    • Filing Date
      2010-05-04
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Patent] 表面処理方法及びその装置2010

    • Inventor(s)
      大橋一仁
    • Industrial Property Rights Holder
      岡山大学
    • Filing Date
      2010-03-03
    • Overseas
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Patent] 表面処理方法及びその装置2010

    • Inventor(s)
      大橋一仁, 塚本眞也, 長谷川裕之
    • Industrial Property Rights Holder
      国立大学法人岡山大学
    • Filing Date
      2010-03-16
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Patent] 表面処理方法及びその装置2010

    • Inventor(s)
      大橋一仁, 塚本眞也, 長谷川裕之
    • Industrial Property Rights Holder
      国立大学法人岡山大学
    • Filing Date
      2010-03-03
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] Effect of Viscoelasticity of Thermoplastic Resin Bonded Wheel on Ultra-Precision Grinding of SiC Wafers2021

    • Author(s)
      H. Sakamoto, Y. Fukushima, K. Sakai, H. Kodama, K. Ohashi
    • Organizer
      The 23rd International Symposium on Advances in Abrasive Technology
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-20K04193
  • [Presentation] SiCウェハの精密研削における熱可塑性樹脂ボンド砥石の砥粒挙動に基づく研削特性の検討2020

    • Author(s)
      福嶋洋志,小川和範,坂井孝三,児玉紘幸,大橋一仁
    • Organizer
      2020年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-20K04193
  • [Presentation] Effect of steady rest in cylindrical traverse grinding of slender workpiece2020

    • Author(s)
      Hidetaka Fujii, Takashi Onishi, Chinhu Lin, Moriaki Sakakura, Kazuhito Ohashi
    • Organizer
      JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-20K04194
  • [Presentation] Improvement of Form Accuracy of Slender Workpiece in Cylindrical Traverse Grinding with Steady Rest2020

    • Author(s)
      Hidetaka Fujii, Takashi Onishi, Chinhu Lin, Moriaki Sakakura, Kazuhito Ohashi
    • Organizer
      18th International Conference on Precision Engineering (ICPE2020)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-20K04194
  • [Presentation] Influence of Grinding Temperature on Surface Quality of CFRP2019

    • Author(s)
      Shingo OKAZAKI, Yifan JIANG, Hiroyuki KODAMA, Hiroyuki YODEN, Kazuhito OHASHI
    • Organizer
      The 22nd International Symposium on Advances in Abrasive Technology (ISAAT2019)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] CFRPの研削加工に及ぼす研削雰囲気の影響2019

    • Author(s)
      岡崎真吾,江 一帆,児玉紘幸,余田裕之,大橋一仁
    • Organizer
      2019年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] CFRP の研削加工における熱影響のシミュレーション2018

    • Author(s)
      江 一帆,児玉紘幸,余田裕之,大橋一仁
    • Organizer
      2018年度精密工学会春季大会
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] ドライアイスブラストを用いたCFRPドライ研削における熱影響の検討2018

    • Author(s)
      岡﨑真吾,江 一帆,児玉紘幸,余田裕之,大橋一仁
    • Organizer
      2018年砥粒加工学会卒業研究発表会
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] パーティクル・ジェットで拡がる精密加工技術2018

    • Author(s)
      大橋一仁
    • Organizer
      精密加工研究会第98回例会
    • Invited
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] Influence of Grinding Atmosphere on Grinding Characteristics of CFRP2018

    • Author(s)
      Shingo Okazaki, Yifan Jiang, Hiroyuki Kodama, Hiroyuki Yoden and Kazuhito Ohashi
    • Organizer
      2018 International Conference on Machining, Materials and Mechanical Technologies (IC3MT 2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] 超硬の縦軸正面研削における研削抵抗分布に及ぼす送り速度の影響2018

    • Author(s)
      辻野駿志,藤原貴典,大橋一仁,児玉紘幸,大西 孝,塚本眞也
    • Organizer
      精密工学会
    • Data Source
      KAKENHI-PROJECT-26420051
  • [Presentation] 超硬の正面研削における砥石作用面上に発現する研削抵抗分布に関する研究2017

    • Author(s)
      藤原貴典,平松弘大,橋口拓郎,大西 孝,大橋一仁,塚本真也
    • Organizer
      2017年度精密工学会春季大会
    • Place of Presentation
      慶應義塾大学 矢上キャンパス
    • Year and Date
      2017-03-13
    • Data Source
      KAKENHI-PROJECT-26420051
  • [Presentation] 静電場を用いた総形単層メタルボンドダイヤモンド砥石の砥粒密度分布制御2017

    • Author(s)
      辰本大輔,渡邉 智,角田悠輔,大橋一仁
    • Organizer
      2017年砥粒加工学会卒業研究発表会
    • Place of Presentation
      ホテルプラザ勝川(愛知県春日井市)
    • Data Source
      KAKENHI-PROJECT-26420050
  • [Presentation] Recovery of Grindactivity by Dry Ice Blasting on Micro-Grit Diamond wheel in dry Grinding of Carbon2017

    • Author(s)
      Yuto Katayama, Yuki Ohta, Hiroyuki Kodama, Kazuhito Ohashi
    • Organizer
      The 20th International Symposium on Advances in Abrasive Technology
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17K06080
  • [Presentation] 単層メタルダイヤモンド砥石の砥粒密度制御法に関する基礎的研究 - 総形砥石表面近傍の静電場によるダイヤモンド砥粒の飛翔現象の検討 -2016

    • Author(s)
      渡邉 智,大橋一仁,角田悠輔,塚本真也
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学 野田キャンパス
    • Year and Date
      2016-03-16
    • Data Source
      KAKENHI-PROJECT-26420050
  • [Presentation] Control of Setting Abrasive Grains on Single-layered Metal Bond Diamond Forming Wheel Using Electrostatic Field2016

    • Author(s)
      S. Watanabe, K. Ohashi, Y.Kakuda, S. Tsukamoto
    • Organizer
      The 19th International Symposium on Advances in Abrasive Technology (ISAAT2016)
    • Place of Presentation
      Stockholm (Sweden)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26420050
  • [Presentation] 単層メタルボンドダイヤモンド砥石の砥粒密度制御法に関する基礎的研究2015

    • Author(s)
      角田悠輔,大橋一仁,渡邉 智,塚本真也
    • Organizer
      2015年度精密工学会中国四国支部高知地方学術講演会
    • Place of Presentation
      高知工科大学
    • Year and Date
      2015-11-28
    • Data Source
      KAKENHI-PROJECT-26420050
  • [Presentation] 縦軸正面研削の研削抵抗分布と寸法生成過程に関する研究2015

    • Author(s)
      藤原貴典,平松弘大,大橋一仁,大西 孝,塚本真也
    • Organizer
      日本機械学会2015年次大会,(一社)日本機械学会
    • Place of Presentation
      北海道大学・工学部
    • Year and Date
      2015-09-13
    • Data Source
      KAKENHI-PROJECT-26420051
  • [Presentation] 一方向凝固複合材料 のスパークアウト研削機構2015

    • Author(s)
      竹下亮佑,大橋一仁,和久芳春,藤原貴典,塚本真也
    • Organizer
      2015年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京
    • Year and Date
      2015-03-18
    • Data Source
      KAKENHI-PROJECT-26420050
  • [Presentation] 円筒プランジ研削における工作物熱変形挙動を考慮した加工技術の開発2014

    • Author(s)
      藤山 泰弘,大西 孝,坂倉守昭,佐藤直樹,大橋一仁,塚本真也
    • Organizer
      砥粒加工学会 先進テクノフェア(ATF2014)
    • Place of Presentation
      大田区産業プラザ
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒プランジ研削における工作物熱変形挙動を考慮した加工技術の開発2014

    • Author(s)
      藤山泰弘,大西孝,坂倉守昭,佐藤直樹,大橋一仁,塚本真也
    • Organizer
      砥粒加工学会先進テクノフェア卒業研究発表会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] High-efficient Regeneration of Grindactivity of Wheel in Dry Grinding of Carbon2014

    • Author(s)
      Kazuhito OHASHI, Yuya TAKATA, Shinya TSUKAMOTO
    • Organizer
      The International Conference on Machining, Materials and Mechanical Technologies
    • Place of Presentation
      NTUH International Convention Center
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Presentation] SiCの表面仕上げにおける工作物対面摺合研磨加工法の提案2013

    • Author(s)
      大橋一仁
    • Organizer
      2013年度精密工学会中国四国支部広島地方学術講演会
    • Place of Presentation
      広島県民文化センターふくやま
    • Year and Date
      2013-11-30
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Presentation] 深穴内面研削加工の高精度化技術2013

    • Author(s)
      大橋一仁
    • Organizer
      砥粒加工学会関西地区部会平成25年度第3回研究・見学会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Grinding System Reducing the Influence of Thermal Deformation of Workpiece in Cylindrical Grinding2013

    • Author(s)
      Takashi Onishi, Moriaki Sakakura, Naoki Sato, Takuya, Kodani, Kazuhito Ohashi and Shinya Tsukamoto
    • Organizer
      The 16th International Symposium on Advances in Abrasive Technology (ISAAT 2013)
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 高アスペクト比砥石を用いた内面研削におけるスパークアウト時間の最適化2013

    • Author(s)
      吉田光佑, 大西孝, 坂倉守昭, 大橋一仁, 塚本真也
    • Organizer
      2013年度精密工学会中国四国支部広島地方学術講演会
    • Place of Presentation
      広島県民文化センターふくやま
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] SiCの表面仕上げにおける工作物対面摺合研磨加工法の提案2013

    • Author(s)
      山口博暢,大橋一仁,塚本真也
    • Organizer
      2013 年度精密工学会中国四国支部広島地方学術講演会
    • Place of Presentation
      広島県民文化センターふくやま
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Presentation] Grinding System Reducing the Influence of Thermal Deformation of Workpiece in Cylindrical Grinding2013

    • Author(s)
      Takashi Onishi, Moriaki Sakakura, Naoki Sato, Takuya Kodani, Kazuhito Ohashi and Shinya Tsukamoto
    • Organizer
      The 16th International Symposium on Advances in Abrasive Technology
    • Place of Presentation
      Hangzhou, China
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 高アスペクト比砥石を用いた内面研削におけるスパークアウト時間の最適化2013

    • Author(s)
      吉田光佑,大西孝,坂倉守昭,大橋一仁,塚本真也
    • Organizer
      2013年度精密工学会中国四国支部広島地方学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Simulation analysis of temperature distribution and thermal deformation in a workpiece during cylindrical grinding2012

    • Author(s)
      ONISHI Takashi, SAKAKURA Moriaki, WADA Yohei, SONG Shonan, SATO Naoki, OHASHI Kazuhito, TSUKAMOTO Shinya
    • Organizer
      10th International Conference on Progress of Machining Technology (ICPMT)
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Improvement of Accuracy in Internal Grinding with Shape Modification on High Aspect Ratio Wheel2012

    • Author(s)
      Takashi ONISHI, KazuhitoOHASHI, Yuya YAMAMOTO,Moriaki SAKAKURA and Shinya TSUKAMOTO
    • Organizer
      The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] カーボンの乾式正面研削におけるドレスレス切れ味回復プロセスの高能率化2012

    • Author(s)
      大橋一仁
    • Organizer
      日本機械学会中国四国支部第50期講演会
    • Place of Presentation
      広島大学工学部
    • Year and Date
      2012-03-07
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Presentation] Fundamental Study on Setting of Diamond Abrasive Grains Using Electrostatic Force for Single-Layered Metal Bond Wheel2012

    • Author(s)
      K. Ohashi
    • Organizer
      ISAAT2012
    • Place of Presentation
      Singapore
    • Year and Date
      2012-09-26
    • Data Source
      KAKENHI-PROJECT-23560126
  • [Presentation] 円筒研削における工作物の熱変形挙動を考慮した加工システムの開発-工作物熱変形量のインプロセス測定による研削終了後の寸法生成量の推定-2012

    • Author(s)
      大西孝,坂倉守昭,佐藤直樹,小谷拓也,孫小楠,大橋一仁,塚本真也
    • Organizer
      2012年度精密工学会中国四国支部島根地方学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Grinding System Considering Thermal Deformation of Workpiece2012

    • Author(s)
      Takashi ONISHI, Moriaki SAKAKURA, Naoki SATO, Takuya KODANI, Kazuhito OHASHI, Shinya TSUKAMOTO
    • Organizer
      The 15th International Machine Tool Engineers’Conference Poster Session
    • Place of Presentation
      東京ビッグサイト(JIMTOF2012会場)
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒プランジ研削における工作物熱変形を考慮した加工システムの開発2012

    • Author(s)
      大西孝,坂倉守昭,佐藤直樹,小谷拓也,孫小楠,大橋一仁,塚本真也
    • Organizer
      日本機械学会第9回生産加工・工作機械部門講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Grinding System Considering Thermal Deformation of Workpiece2012

    • Author(s)
      Takashi ONISHI, Moriaki SAKAKURA, Naoki SATO, Takuya KODANI, Kazuhito OHASHI, Shinya TSUKAMOTO
    • Organizer
      The 15th International Machine Tool Engineers'Conference Poster Session
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] キャビテーションを利用した金型のマイクロ砥粒加工法に関する研究2011

    • Author(s)
      清水章広, 魯楠, 大橋一仁, 塚本真也
    • Organizer
      日本機械学会中国四国支部第49期講演会
    • Place of Presentation
      岡山市
    • Year and Date
      2011-03-05
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] 円筒プランジ研削における工作物熱変形量のシミュレーション解析-研削動力からの工作物温度分布の推定-2011

    • Author(s)
      大西孝,坂倉守昭,和田洋平,大橋一仁,塚本真也
    • Organizer
      2011年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 高アスペクト比砥石を用いた内面研削に関する研究-形状誤差生成過程の解明と砥石の形状補正による形状精度の改善-2011

    • Author(s)
      山本雄也,大西孝,大橋一仁,塚本真也,坂倉守昭
    • Organizer
      2011年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 高アスペクト比砥石を用いた内面研削における形状誤差の発生要因2011

    • Author(s)
      山本雄也,大西孝,大橋一仁,坂倉守昭,塚本真也
    • Organizer
      2011年度精密工学会中国四国支部岡山地方学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒研削における工作物熱変形量のシミュレーション解析技術の開発-工作物表面温度のインプロセス測定結果を用いた研削エネルギの推定-2011

    • Author(s)
      大西孝,坂倉守昭,和田洋平,谷村賢彦,大橋一仁,塚本真也
    • Organizer
      2011年度砥粒加工学会学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 吸引キャビテーション流を利用したガラスの精密砥粒加工におけるワーク回転とオフセットの効果2011

    • Author(s)
      村裕之, 魯楠, 大橋一仁, 塚本真也
    • Organizer
      日本機械学会中国四国支部第49期講演会
    • Place of Presentation
      岡山市
    • Year and Date
      2011-03-05
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] 円筒研削における研削動力を用いた研削抵抗の推定2011

    • Author(s)
      孫小楠,大西孝,坂倉守昭,和田洋平,谷村賢彦,大橋一仁,塚本真也
    • Organizer
      2011年度精密工学会中国四国支部岡山地方学術講演会
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 硬脆材料の微細研削・砥粒加工技術2010

    • Author(s)
      大橋一仁
    • Organizer
      ミクロものづくり大学
    • Place of Presentation
      岡山
    • Year and Date
      2010-07-28
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] 硬脆材料の微細研削・砥粒加工技術2010

    • Author(s)
      大橋一仁
    • Organizer
      ミクロものづくり大学
    • Place of Presentation
      岡山市
    • Year and Date
      2010-07-28
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] Study on Cavitation Aided Abrasive Machining on Glass, Key Engineering Materials2009

    • Author(s)
      K.Ohashi, S.Tsukamoto, T.Nakajima
    • Organizer
      ICPMT2009
    • Place of Presentation
      中国・昆明
    • Year and Date
      2009-04-26
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] 反転吸引キャビテーション流を利用した精密砥粒加工法の基礎的研究(第2報)-加工条件による加工特性の変化2009

    • Author(s)
      魯楠, 大橋一仁, 塚本真也
    • Place of Presentation
      下関市
    • Year and Date
      2009-11-21
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] 反転吸引キャビテーション流を利用した精密砥粒加工法の基礎的研究(第2報)-加工条件による加工特性の変化-2009

    • Author(s)
      魯楠, 大橋一仁, 塚本真也
    • Organizer
      2009年精密工学会中国四国支部山口地方学術講演会
    • Place of Presentation
      海峡メッセ下関(山口県)
    • Year and Date
      2009-11-21
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] Fundamental Study on the Precision Abrasive Machining Using a Cavitation in Reversing Suction Flow2008

    • Author(s)
      K.Ohashi, R.J.Wang, H.Hasegawa, S.Tsukamoto
    • Organizer
      ISAAT2008
    • Place of Presentation
      淡路市
    • Year and Date
      2008-10-01
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] Fundamental Study on the Precision Abrasive Machining Using a Cavitation in Reversing Suction Flow2008

    • Author(s)
      K. Ohashi
    • Organizer
      ISAAT2008
    • Place of Presentation
      淡路島国際会議場
    • Year and Date
      2008-10-01
    • Data Source
      KAKENHI-PROJECT-20560109
  • [Presentation] Novel On-Machine Measurement of Surface Finish with Thermoelectric Effect for Rotating Ground Workpiece2007

    • Author(s)
      K. OHASHI
    • Organizer
      ISAAT2007
    • Place of Presentation
      Dearbone, MI, USA
    • Year and Date
      2007-09-28
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-18560106
  • [Presentation] Novel On-Machine Measurement of Surface Finish with Thermoelectric Effect for Rotating Ground Workpiece2007

    • Author(s)
      K. OHASHI
    • Organizer
      ISAAT2007
    • Place of Presentation
      Dearbone,MI,USA
    • Year and Date
      2007-09-28
    • Data Source
      KAKENHI-PROJECT-18560106
  • [Presentation] 高アスペクト比砥石を用いた内面研削に関する研究 -形状誤差生成過程の解明と砥石の形状補正による形状精度の改善-

    • Author(s)
      山本雄也,大西孝,大橋一仁,坂倉守昭,塚本真也
    • Organizer
      2011年度砥粒加工学会学術講演会
    • Place of Presentation
      中部大学
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Study on Grinding Force Distribution on Cup Type Electroplated Diamond Wheel in Face Grinding of Cemented Carbide

    • Author(s)
      Takanori Fujiwara, Shinya Tsukamoto, Kazuhito Ohashi and Takashi Onishi
    • Organizer
      The 17th International Symposium on Advances in Abrasive Technology
    • Place of Presentation
      Courtyard by Marriott King Kamehameha's Kona Beach Hotel, Kona, Hawaii Island, Hawaii, USA
    • Year and Date
      2014-09-22 – 2014-09-25
    • Data Source
      KAKENHI-PROJECT-26420051
  • [Presentation] 円筒研削における工作物熱変形量のシミュレーション解析技術の開発 -工作物表面温度のインプロセス測定結果を用いた研削エネルギの推定-

    • Author(s)
      大西孝,坂倉守昭,和田洋平,谷村賢彦,大橋一仁,塚本真也
    • Organizer
      2011年度砥粒加工学会学術講演会
    • Place of Presentation
      中部大学
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒研削における工作物の熱変形挙動を考慮した加工システムの開発-工作物熱変形量のインプロセス測定による研削終了後の寸法生成量の推定-

    • Author(s)
      大西孝,坂倉守昭,佐藤直樹,小谷拓也,孫小楠,大橋一仁,塚本真也
    • Organizer
      2012 年度精密工学会中国四国支部島根地方学術講演会
    • Place of Presentation
      くにびきメッセ
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒研削における工作物熱変形量のシミュレーション解析

    • Author(s)
      佐藤直樹,大西 孝,坂倉守昭,和田洋平,孫 小楠,大橋一仁,塚本真也
    • Organizer
      2012 年度砥粒加工学会学術講演会
    • Place of Presentation
      同志社大学
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] Simulation analysis of temperature distribution and thermal deformation in a workpiece during cylindrical grinding

    • Author(s)
      ONISHI Takashi, SAKAKURA Moriaki, WADA Yohei,SONG Shonan, SATONaoki, OHASHI Kazuhito,TSUKAMOTO Shinya
    • Organizer
      10th International Conference on Progress of Machining Technology
    • Place of Presentation
      燕三条地場産業振興センター
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒研削における研削動力を用いた研削抵抗の推定

    • Author(s)
      孫小楠,大西孝,坂倉守昭,和田洋平,谷村賢彦,大橋一仁,塚本真也
    • Organizer
      2011年度精密工学会中国四国支部岡山地方学術講演会
    • Place of Presentation
      岡山大学
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒プランジ研削における工作物熱変形量のシミュレーション解析 -研削動力からの工作物温度分布の推定-

    • Author(s)
      大西孝,坂倉守昭,和田洋平,大橋一仁,塚本真也
    • Organizer
      2011年度精密工学会秋季大会学術講演会
    • Place of Presentation
      金沢大学
    • Data Source
      KAKENHI-PROJECT-23560127
  • [Presentation] 円筒プランジ研削における工作物熱変形を考慮した加工システムの開発

    • Author(s)
      大西 孝,坂倉守昭,佐藤直樹,小谷拓也,孫 小楠,大橋一仁,塚本真也
    • Organizer
      日本機械学会 第9 回生産加工・工作機械部門講演会
    • Place of Presentation
      秋田県立大学
    • Data Source
      KAKENHI-PROJECT-23560127
  • 1.  TSUKAMOTO Shinya (80163773)
    # of Collaborated Projects: 25 results
    # of Collaborated Products: 56 results
  • 2.  NAKAJIMA Toshikatsu (80026038)
    # of Collaborated Projects: 17 results
    # of Collaborated Products: 0 results
  • 3.  ONISHI Takashi (90630830)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 37 results
  • 4.  FUJIWARA Takanori (20274011)
    # of Collaborated Projects: 5 results
    # of Collaborated Products: 5 results
  • 5.  HASEGAWA Hiroyuki (60403482)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 2 results
  • 6.  児玉 紘幸 (60743755)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 13 results
  • 7.  宇野 義幸 (20029341)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi