Shamoto Eiji 社本英二

… Alternative Names

SHAMOTO Eiji 社本英二

SHAMOTO E 社本英二

Less

Researcher Number	20216146
Other IDs
External Links
Affiliation (Current)	2025: 名古屋大学, 工学研究科, 教授
Affiliation (based on the past Project Information) *help	2015 – 2021: 名古屋大学, 工学研究科, 教授 2015: 名古屋大学, 大学院工学研究科, 教授 2012 – 2015: 名古屋大学, 工学(系)研究科(研究院), 教授 2011 – 2012: 名古屋大学, 大学院・工学研究科, 教授 2010 – 2012: 名古屋大学, 工学研究科, 教授 … More 2007 – 2008: Nagoya University, 大学院・工学研究科, 教授 2003 – 2004: 名古屋大学, 大学院・工学研究科, 教授 2003: Nagoya University, Graduate School of Engineering, Professor, 工学部, 教授 2002: Nagoya University, Graduate School of Engineering, Professor, 工学研究科, 教授 1994 – 2001: Kobe University, Production Engineering, Associate Professor, 工学部, 助教授 1989 – 1993: Kobe University, Production Engineering Department, Research Associate, 工学部, 助手 Less
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / Design engineering/Machine functional elements/Tribology Except Principal Investigator 機械工作・生産工学 / 機械工作 / Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Keywords	Principal Investigator 切削力 / 楕円振動切削加工法 / 超音波振動 / Piezoelectric actuator / XYθテーブル / 圧電素子 / 超精密加工 / 摩擦力 / 潤滑効果 / せん断角 … More / 切りくず厚さ / Vacuum / Positioning device / Semiconductor production equipment / Ultraprecision alignment table / 真空 / 位置決め装置 / 半導体製造装置 / 超精密アライメント装置 / XYθ table / 流体軸受 / 切削加工 / 共振周波数自動追尾 / 工具摩耗 / 仕上げ面あらさ / ダイヤモンド工具 / 超機密アライメント装置 / Xyθ table / Dual mode driving system / Fine positioning resolution / High rigidity / Feed device / Ultraprecision positioning / Walking drive / デュアルモード駆動システム / 高分解能 / 高剛性 / 送り装置 / 超精密位置決め / Walking Drive / 気体軸受 / 非接触浮上 / 進行波 / 機械要素 / トライボロジー / スライダー / 対向型軸受 / 解析モデル / 耐荷重 / 軸受剛性 / 表面張力 / せん断面モデル / 放物線軌跡 / 振動解析 / 放物線振動切削 / 超音波振動切削 / 位相差 / 主分力 / 背分力 / 切削プロセス制御 / 仕上げ面粗さ / 形状精度 / クロス制御 / 超精密切削加工 / 回転工具 / 干渉除去 / 振動制御 / 臨界切込み量 / 振動軌跡 / 超音波楕円振動 / 転写性 / 臨界切込み / 延性モード切削 … More Except Principal Investigator Walking drive / 圧電素子 / 超精密工作機械 / Diamond tool / ダイヤモンド工具 / Elliptical vibration cutting / Walking Drive / Ultraprecision cutting / 超精密切削加工 / 超精密切削 / びびり振動 / 切削加工 / 熱変形 / 楕円振動切削加工法 / Burr / Cutting force / ばり / Ultraprecision positioning / ナノテクノロジー / 超精密位置決め / 精密送りテーブル / 超精密加工機 / Critical depth of cut / Tool life / Brittle materials / Ductile cutting / Ultrasonic vibration cutting / ダイヤモンド切削 / 臨界切込み量 / 工具寿命 / Intelligent control / Ultraprecision machine tool / 誤差補正 / 運動誤差 / 切削力 / 最適化 / 工具姿勢 / 混合整数計画問題 / 数理計画法 / 衝突回避 / 姿勢制御 / 多軸工作機械 / 工程設計 / 切削工具 / プロセスモニタリング / 工作機械 / Diamond cutting / Compensation of error / Compensation of thermal deformation / Ultra-precision tool positioning device / Ultra-precision machine tool / 微小切込み装置 / 超精密切削加工機 / 熱変形制御 / インテリジェント制御 / 超精密切込み装置 / Rotating accuracy / Torque / Piezo-electric actuator / Spherical motor / 超精密回転 / 回転精度 / トルク / 球面モータ / 3 dimensional structure / Shape accuracy / Surface roughness / Chip formation / Micro machining / 3次元複雑形状 / 形状精度 / 仕上げ面粗さ / 切りくず生成 / マイクロ加工 / Rotational Speed / Ambient Temperature / Compensation / Convolution Integral / Transfer Function / Air Spindle / Ultraprecision Machine Tool / Thermal Deformation / 誤差推定 / インプロセス補正制御 / ダイヤモンド切削加工 / 周囲気温 / 超精密工作機 / 周囲温度 / たたみこみ積分 / 伝達関数 / 高精度化 / 空気静圧軸受 / Machining accuracy / Regenerative chatter vibration / Chase of resonant frequency / 切削プロセス / 周波数追尾 / 振動切削 / 超精密加工 / 加工精度 / 切削抵抗 / 共振周波数自動追尾 / ダイヤモント工具 / XYrheta table / Microscope / Micro manufacturing / 楕円振動切削加工 / 走査型電子顕微鏡 / XYθテーブル / XYΘテーブル / 楕円振動切削 / 電子顕微鏡 / マイクロマニュファクチャリング / Motion acuracy / Nano technology / Precision feed device / Piezoelectric actuator / 運動精度 / Cutting mechanics / 脆性材料 / 延性モード切削 / 切削機構 / 振動切削加工法 / design of accuracy / mathematical model / shape generation process / precision machining / Precision machining system / 同時制御加工 / エンドミル加工 / 形状創成モデル / 精度設計 / 数学モデル / 形状創成過程 / 精密加工 / 機械加工システム / Steel / Ultraprecision diamond cutting / 振動切削機構 / 鋼 / 硬脆材料 / 鉄系材料 / 延性モード切削加工 / 超音波振動切削加工 / 超精密ダイヤモンド切削加工 / Rule-based System / Model of Machining Errors / Design for Accuracy / Machine Tools / Intelligent / Distributed System / Manufacturing System / 意思決定構造 / 構造設計 / ル-ルベ-スシステム / 加工誤差モデル / 誤差設計 / 加工用機械 / 知能化 / 自律分散 / 生産システム / Error compensation / Machining errors / エキスパ-トシステム / インテリジェントコントロ-ル / 加工誤差 / 磁気軸受主軸 / Roundness of tool edge / Crystal orientation / Rigid-plastic FEM / Single crystal metals / Ultra-precision micro cutting / 銅単結晶 / 仕上げ面あらさ / 2次元切削 / 単結晶ダイヤモンド工具 / 超微小切削 / 工具刃先丸み / シュミット因子 / 剛塑性有限要素法 / 単結晶 / 超精密超微小切削 / 多軸制御 / 工具経路生成 / 不等リードエンドミル / 不等ピッチエンドミル / 切削 / ロバスト設計 / 再生効果 / エンドミル / CAD/CAM / 衝突判定 / 線形計画法 / 数理モデル Less

Design of cutting tool flank texture that overturns the conventional limit in chatter stability
- Principal Investigator
  
  Suzuki Norikazu
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Chuo University
  Nagoya University
A novel model-based process monitoring for next-generation cutting technology
- Principal Investigator
  
  Suzuki Norikazu
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Cutter design of irregular pitch / variable helix end mills to increase chatter stability in cutting
- Principal Investigator
  
  Suzuki Norikazu
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Optimization of Tool Posture in Multi Axis Machining by Mathematical Programming
- Principal Investigator
  
  Hino Rei
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka Electro-Communication University
  Nagoya University
Development of "Traveling Wave" Air Bearing which Exceeds Limitation of Traditional PrinciplesPrincipal Investigator
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Nagoya University
Optimization of Tool Posture in Multi Axis Machining by Mathematical Programming
- Principal Investigator
  
  HINO Rei
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Development of parabolic vibration cutting device to realize significant reduction of cutting forcePrincipal Investigator
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
表面張力を利用した真空内非接触流体軸受の開発Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  2007
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Nagoya University
放物線振動切削加工法の提案Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  2004
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
楕円振動切削を利用した切削プロセス制御の試みPrincipal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  2003
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Development of ultrapretision alignment table which can be used in vacuum by means of walking drivePrincipal Investigator
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Nagoya University
Development of 3 DOF Spherical Motor by Means of Walking Drive
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
DEVELOPMENT OF ULTRAPRECISION ALIGNMENT TABLE BY MEANS OF WALKING DRIVEPrincipal Investigator
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  NAGOYA UNIVERSITY
  Kobe University
ULTRAPRECISION MACHINING OF 3 DIMENSIONAL MICRO STRUCTURES BY APPLYING ELLIPTICAL VIBRATION CUTTING
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KOBE UNIVERSITY
楕円振動切削加工に関する研究Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Study on Compensation Control of Thermal deformation of Ultraprecision Machine Tool
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Ultraprecision High Speed XYθ Table Driven by Means of Walking DrivePrincipal Investigator
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
硬脆材料の延性モード楕円振動切削加工に関する研究Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Ultraprecision Elliptical Vibration Cutting Machine
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
超音波楕円振動切削加工に関する研究Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Study on Micro-Manufactring within Scanning Electron Microscope
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
楕円振動切削加工法に関する研究Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  1994
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Simultaneous 3-axis control ultraprecision machine tool based on principle of Walking Drive
- Principal Investigator
  
  MORIWAKI T
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
楕円振動を適用した強制潤滑切削加工法Principal Investigator
- Principal Investigator
  
  社本英二
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Ductile Cutting of brittle materials by Applying Ultrasonic Vibration
- Principal Investigator
  
  MORIWAKI Toshimchi
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
A study on design method of accuracy for precision machining system based on mathematical model
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Ultraprecision Diamond Cutting of steel by Applying Ultrasonic Vibration
- Principal Investigator
  
  MORIWAKI Toshimiti
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Development of Ultraprecision Intelligent Machine Tool
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Design System of Machine Tool Structures Suitable for Autonomous Distributed Manufacturing Systems
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Study on Ultra-Precision Micro Diamond Cutting
- Principal Investigator
  
  MORIWAKI. T
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Development of Ultra-Precision Intelligent Machining Control System
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  機械工作
- Research Institution
  Kobe University

[Book] Advanced Applications of Elliptical Vibration Cutting in Micro/Nanomachining of Difficult-to-Cut Materials2018
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Eiji Shamoto
- Total Pages
  34
- Publisher
  Springer, Singapore
- ISBN
  9789811333354
- Data Source
  KAKENHI-PROJECT-16H04243
[Book] Smart Devices and Machines for Advanced Manufacturing 分担執筆, 第10章, Walking Drive Enabled Ultra-Precision Positioners2008
- Author(s)
  Eiji Shamoto, Rei Hino
- Publisher
  Sprinter-Verlag London
- Data Source
  KAKENHI-PROJECT-19656044
[Journal Article] Dynamic contour error compensation in micro/nano machining of hardened steel by applying elliptical vibration sculpturing method2021
- Author(s)
  Zhang Jianguo、Suzuki Norikazu、Shamoto Eiji、Xu Jianfeng
- Journal Title
  
  Precision Engineering
  
  Volume: 71 Pages: 250-262
- DOI
  10.1016/j.precisioneng.2021.03.017
- NAID
  120007175379
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Influence of flank texture patterns on suppression of chatter vibration and flank adhesion in turning operation2021
- Author(s)
  Wataru Takahashi, Tomoki Nakanomiya, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 68 Pages: 262-272
- DOI
  10.1016/j.precisioneng.2020.12.007
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part 2: Analytical and experimental verification of the proposed method2020
- Author(s)
  Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 68 Pages: 20-34
- DOI
  10.1016/j.precisioneng.2020.11.008
- NAID
  120007166653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Development of a novel boring tool with anisotropic dynamic stiffness to avoid chatter vibration in cutting Part 1: Design of anisotropic structure to attain infinite dynamic stiffness2020
- Author(s)
  Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 68 Pages: 57-71
- DOI
  10.1016/j.precisioneng.2020.11.007
- NAID
  120007166652
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19H02041
[Journal Article] Influence of Clearance Angle on Micro/nano Structure Fabrication in Elliptical Vibration Cutting of Hardened Steel2017
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Yilong Wang, Eiji Shamoto
- Journal Title
  
  International Journal of Nanomanufacturing
  
  Volume: 13 Issue: 4 Pages: 351-361
- DOI
  10.1504/ijnm.2017.087536
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Journal Article] Mechanics of Chip-Guiding Cutting with Grooved Tools2016
- Author(s)
  青木友弥, Burak SENCER, 鈴木教和, 小出富夫, 社本英二
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 82 Issue: 1 Pages: 75-81
- DOI
  10.2493/jjspe.82.75
- NAID
  130005118320
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Development of a high-performance chip-guiding turning process—tool design and chip flow control2015
- Author(s)
  Tomoya Aoki, Burak Sencer, Eiji Shamoto, Norikazu Suzuki, Tomio Koide
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 1 Issue: 1-4 Pages: 1-15
- DOI
  10.1007/s00170-015-7990-5
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015, KAKENHI-PROJECT-16H04243
[Journal Article] Multi-Frequency Solution for Chatter Stability Analysis in Low Immersion End Milling with Irregular Pitch / Variable Helix Cutters2014
- Author(s)
  Takuya KOJIMA, Norikazu SUZUKI, Rei HINO and Eiji SHAMOTO
- Journal Title
  
  Proceedings of the 15th International Conference on Precision Engineering
  
  Volume: 1 Pages: 603-604
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Analytical investigation on polishing pressure distribution by utilizing three-dimensional process simulation2014
- Author(s)
  Yohei Hashimoto, Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto, Hozumi Yasuda, Satoru Yamaki
- Journal Title
  
  Proceedings of International Conference on Planarization/CMP Technology
  
  Volume: 1 Pages: 20-22
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Ultra-Precision Nano-Structure Fabrication by Amplitude Control Sculpturing Method in Elliptical Vibration Cutting2014
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Yilong Wang, and Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 39 Pages: 86-99
- DOI
  10.1016/j.precisioneng.2014.07.009
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Primary study on nonlinear viscoelasticity measurement of chemical mechanical polishing pads by applying on-machine compression test2014
- Author(s)
  Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto
- Journal Title
  
  Japanese Journal of Applied Physics
  
  Volume: 53 Issue: 5S2 Pages: 05GB01-05GB01
- DOI
  10.7567/jjap.53.05gb01
- NAID
  210000143946
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond2014
- Author(s)
  Jianguo Zhang, Norikazu Suzuki, Yilong Wang, and Eiji Shamoto
- Journal Title
  
  Journal of Materials Processing Technology
  
  Volume: 214 Issue: 11 Pages: 2644-2659
- DOI
  10.1016/j.jmatprotec.2014.05.024
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Force prediction in cutting operations with self-propelled rotary tools considering bearing friction2014
- Author(s)
  Norikazu Suzuki, Toru Suzuki, Ran An, Kota Ukai, Eiji Shamoto, Yu Hasegawa, Nobukazu Horiike
- Journal Title
  
  Procedia CIRP
  
  Volume: 14 Pages: 125-129
- DOI
  10.1016/j.procir.2014.03.033
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Tool failure Mechanism in High-Speed Milling of Inconel 718 by Use of Ceramic Tools2014
- Author(s)
  N. Suzuki, R. Enmei, Y. Hashimoto, E. Shamoto and Y. Hatano
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 8 Pages: 837-846
- NAID
  130007673896
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Investigation on Machining Performance of Amplitude Control Sculpturing Method in Elliptical Vibration Cutting2013
- Author(s)
  J. Zhang, N. Suzuki, E. Shamoto
- Journal Title
  
  Procedia CIRP
  
  Volume: 8 Pages: 327-332
- DOI
  10.1016/j.procir.2013.06.111
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] Suppression of Regenerative Chatter Vibration in Multiple Milling Utilizing Speed Difference Method - Analysis of Double-Sided Milling and Its Generalization to Multiple Milling Operations2013
- Author(s)
  Eiji Shamoto, Tatsuya Mori, Burak Sencer, Norikazu Suzuki and Rei Hino
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.37, Issue 3 Issue: 3 Pages: 580-589
- DOI
  10.1016/j.precisioneng.2013.01.003
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11F01054, KAKENHI-PROJECT-25289015
[Journal Article] Multiple Exchanges of Job Orders for No Buffer Job Shop Scheduling Problem (Identification of Jobs to be Changed on Gantt Chart)2013
- Author(s)
  早坂健宏，樋野励，社本英二
- Journal Title
  
  TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
  
  Volume: 79 Issue: 806 Pages: 3951-3964
- DOI
  10.1299/kikaic.79.3951
- NAID
  130003386456
- ISSN
  0387-5024, 1884-8354
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420051
[Journal Article] 新しい原理に基づく流体軸受2013
- Author(s)
  社本英二
- Journal Title
  
  トライボロジスト
  
  Volume: 58-2(掲載確定)
- NAID
  10031175878
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] 研磨パッドの微細凹凸接触を考慮した CMP プロセスの EHL 解析2013
- Author(s)
  橋本洋平, 鈴木教和,浅羽正和, 樋野励,社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 79-2 Pages: 73-80
- NAID
  130003369770
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] A Novel Design Method of Variable Helix Cutters to Attain Robust Regeneration Suppression2013
- Author(s)
  Takuya Kojima, Norikazu Suzuki, Rei Hino, Eiji Shamoto
- Journal Title
  
  Procedia CIRP
  
  Volume: 8 Pages: 362-366
- DOI
  10.1016/j.procir.2013.06.117
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] 新しい原理に基づく流体軸受2013
- Author(s)
  社本英二
- Journal Title
  
  トライボロジスト
  
  Volume: 58
- NAID
  10031175878
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Analysis of three-dimensional cutting process with thin shear plane model2013
- Author(s)
  Eiji Shamoto, Masahiro Kato, Norikazu Suzuki, Rei Hino
- Journal Title
  
  Journal of Manufacturing Science and Engineering
  
  Volume: 135 Issue: 4 Pages: 41001-41001
- DOI
  10.1115/1.4024531
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25289015
[Journal Article] A novel tool path/posture optimization concept to avoid chattervibration in machining - Proposed concept and its verification in turning2012
- Author(s)
  Eiji Shamoto, Shunsuke Fujimaki, Burak Sencer, Norikazu, Suzuki, Takashi Kato, Rei Hino
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: 61/1 Issue: 1 Pages: 331-334
- DOI
  10.1016/j.cirp.2012.03.133
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11F01054, KAKENHI-PROJECT-22560107
[Journal Article] 機械構造の結合部における摩擦減衰の解明と定量的予測(ねじり振動が作用する場合)2012
- Author(s)
  品川幹,社本英二
- Journal Title
  
  日本機械学会論文集C編
  
  Volume: 78 - 2 Pages: 2048-206
- NAID
  130002051465
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] A Novel Tool Path/posture Optimization Concept to Avoid Chatter Vibration in Machining-Proposed concept and it verification in Turning2012
- Author(s)
  Eiji Shamoto, Shunsuke Fujimaki, Burak Sencer, Norikazu, Suzuki, Takashi Kato, Rei Hino
- Journal Title
  
  CIRP Annals Manufacturing Technology
  
  Volume: Vol.61 Pages: 331-334
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560107
[Journal Article] パイこね変換に基づく量産対応・高速ミキサの開発2012
- Author(s)
  尾本悠輔,加藤大香士,鈴木教和,安井隆雄,大里恵子,加地範匡,渡慶次学,馬場嘉信,酒井康彦,社本英二
- Journal Title
  
  日本機械学会論文集 B1 編
  
  Volume: 78-2 Pages: 762-768
- NAID
  130002050716
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Prediction and Compensation of Motion Accuracy in a Linear Motion Bearing Table2011
- Author(s)
  Gyungho Khim, Chun Hong Park, Eiji Shamoto, Seung Woo Kim
- Journal Title
  
  Precision Engineering
  
  Volume: 35 Issue: 3 Pages: 393-399
- DOI
  10.1016/j.precisioneng.2010.12.006
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning2011
- Author(s)
  E.Shamoto, T.Aoki, B.Sencer, N.Suzuki, R.Hino, T.Koide
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 印刷中(未定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning2011
- Author(s)
  Eiji Shamoto, T omoya Aoki, BurakSencer, Norikazu Suzuki, Rei Hino, Tomio Koide
- Journal Title
  
  CIRP Annals - Manufacturing Technology
  
  Volume: Vol.60 Pages: 125-128
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Prediction and Compensation of Motion Accuracy in a Linear Motion Bearing Table2011
- Author(s)
  Gyungho Khim, Chun Hong Park, Eiji Shamoto, and Seung Woo Kim
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.35, Issue 3 Pages: 393-399
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] CMP プロセスにおける接触応力の動的有限要素法解析2011
- Author(s)
  橋本洋平, 鈴木教和, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 77-2 Pages: 513-519
- NAID
  130001362307
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] 異方性を持つ低剛性工具によるエンドミル加工時のびびり振動安定限界2011
- Author(s)
  倉田祐輔, 鈴木教和, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 77 Pages: 97-104
- NAID
  130000812182
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560107
[Journal Article] Simultaneous double-sided milling of flexible plates with high accuracy and high efficiency-Suppression of forced chatter vibration with synchronized single-tooth cutters2011
- Author(s)
  Tatsuya Moria, Tomoki Hiramatsu, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 掲載決定(未定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Dynamic Finite Element Analysis of Contact Stress in CMP Process2011
- Author(s)
  橋本洋平, 鈴木教和, 樋野励, 社本英二
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 77 Issue: 5 Pages: 513-519
- DOI
  10.2493/jjspe.77.513
- NAID
  130001362307
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070, KAKENHI-PROJECT-22760097
[Journal Article] Simultaneous double-sided milling of flexible plates with high accuracy and high efficiency-Suppression of forced chatter vibration with synchronized single-tooth cutters2011
- Author(s)
  Tatsuya Mori, Tomoki Hiramatsu, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: 35 Issue: 3 Pages: 416-423
- DOI
  10.1016/j.precisioneng.2011.02.002
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] 異方性を持つ低剛性工具によるエンドミル加工時のびびり振動安定限界2011
- Author(s)
  倉田祐輔,鈴木教和,樋野励,社本英二
- Journal Title
  
  精密工学会誌
  
  Volume: 77巻 Pages: 97-104
- NAID
  130000812182
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560107
[Journal Article] Studies on Continuous Chip Disposal and Chip-Pulling Cutting2011
- Author(s)
  社本英二, 安田浩一朗, 青木友弥, 鈴木教和, 小出富夫
- Journal Title
  
  Journal of the Japan Society for Precision Engineering
  
  Volume: 77 Issue: 5 Pages: 520-524
- DOI
  10.2493/jjspe.77.520
- NAID
  130001362308
- ISSN
  0912-0289, 1882-675X
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070, KAKENHI-PROJECT-22760097
[Journal Article] Simultaneous double-sided milling of flexible plates with high accuracy and high efficiency-Suppression of forced chatter vibration with synchronized single-tooth cutters2011
- Author(s)
  Tatsuya Mori, Tomoki Hiramatsu and Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.3 Pages: 416-423
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Prediction and Compensation of Motion Accuracy in a Linear Motion Bearing Table2011
- Author(s)
  Gyungho Khim, Chun Hong Park, Eiii Shamoto, Seung Woo Kim
- Journal Title
  
  Precision Engineering
  
  Volume: 掲載決定(未定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting2011
- Author(s)
  Norikazu Suzuki, Hideo Yokoi, Eiji Shamoto
- Journal Title
  
  Precision Engineering
  
  Volume: Vol.35, Issue 1 Pages: 44-50
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Control of chip flow with guide grooves for continuous chip disposal and chip-pulling turning2011
- Author(s)
  Eiji Shamoto, Tomoya Aoki, Burak Sencer, Norikazu Suzuki, Rei Hino, Tomio Koide
- Journal Title
  
  CIRP Annals-Manufacturing Technology
  
  Volume: 60 Issue: 1 Pages: 126-128
- DOI
  10.1016/j.cirp.2011.03.081
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-11F01054, KAKENHI-PROJECT-22360070, KAKENHI-PROJECT-22760097
[Journal Article] Chatter Stability in Turning and Milling with in Process Identified Process Damping2010
- Author(s)
  Yusuke Kurata, S. Doruk Merdol, Yusuf Altintas, Norikazu Suzuki, Eiji Shamoto
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: Vol. 4, No. 6 Pages: 1107-1118
- NAID
  130000335384
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] Suppression of regenerative chatter vibration in simultaneous double-sided milling of flexible plates by speed difference2010
- Author(s)
  Eiji Shamoto, Tatsuya Mori, Kohei Nishimura, Tomoki Hiramatsu, Yusuke Kurata
- Journal Title
  
  CIRP Annals -Manufacturing Technology
  
  Volume: Vol.59 Pages: 387-390
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360070
[Journal Article] 強制・自励型びびり振動を回避するエンドミル加工条件の統合的検討2009
- Author(s)
  鈴木教和, 井加田勲, 樋野励, 社本英二
- Journal Title
  
  精密工学会誌 (未定掲載決定)
- NAID
  130000421709
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Analytical prediction of chatter stability in ball end milling with tool inclination2009
- Author(s)
  Eiji Shamoto, Koichi Akazawa
- Journal Title
  
  CIRP Annals-Manufacturing Technology Vol. 58(In press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] アブレシブ摩耗・拡散摩耗を考慮した工具摩耗予測に関する研究2009
- Author(s)
  赤澤浩一, 尾崎勝彦, 社本英二
- Journal Title
  
  精密工学会誌 75-3
  
  Pages: 396-401
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  Annals of the CIRP Vol.57/1(掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  CIRP Annals - Manufacturing Technology 57/1
  
  Pages: 57-60
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity2008
- Author(s)
  Rei Hino, Norikazu Suzuki and Eiji Shamoto
- Journal Title
  
  Proc. of the 41st CIRP International Conference on Manufacturing Systems (掲載決定)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19656044
[Journal Article] リエントラントフローショップスケジューリング問題に関する研究(第1報)数理計画法による最適化2008
- Author(s)
  樋野励, 上川大輔, 森川正憲, 鈴木教和, 社本英二
- Journal Title
  
  精密工学会誌 74-10
  
  Pages: 1119-1124
- NAID
  110006951294
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Analysis of 3D Elliptical Vibration Cutting with Thin Shear Plane Model2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  CIRP Annals-Manufacturing Technology 57
  
  Pages: 57-60
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] リエントラントフローショップスケジューリング問題に関する研究(第2報)発見的なスケジュール手法の提案2008
- Author(s)
  樋野励, 上川大輔, 森川正憲, 鈴木教和, 社本英二
- Journal Title
  
  精密工学会誌 74-11
  
  Pages: 1225-1230
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Elliptical Vibration Cutting of Tungsten Alloy Molds for Optical Glass Parts2007
- Author(s)
  Norikazu Suzuki, Makoto Haritani, Ji-bin Yang, Rei Hino, Eiji Shamoto
- Journal Title
  
  Annals of the CIRP Vol.56/1
  
  Pages: 127-130
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Development of 3 DOF Ultrasonic Elliptical Vibration System for Elliptical Vibration Cutting2007
- Author(s)
  Norikazu Suzuki, Rei Hino and Eiji Shamoto
- Journal Title
  
  Annals of the CIRP
  
  Pages: 15-2
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Simulation of Elliptical Vibration Cutting Process with Thin Shear Plane Model2007
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Rei Hino
- Journal Title
  
  Proceedings of ASPE Spring Topical Meeting on Vibration Assisted Machining Technology
  
  Pages: 64-69
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360064
[Journal Article] Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces2005
- Author(s)
  E.Shamoto
- Journal Title
  
  Annals of CIRP 54/1(to be published)
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 進行波を利用した流体軸受の開発2005
- Author(s)
  社本英二
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 1063-1064
- NAID
  130004657784
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of Fluid Bearing Utilizing Traveling Wave2005
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Akihide Hamaguchi
- Journal Title
  
  Proc.of 2005 JSPE Spring Conference
  
  Pages: 1063-1064
- NAID
  130004657784
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces2005
- Author(s)
  E.Shamoto
- Journal Title
  
  Annals of the CIRP 54/・1(to be published)
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces2005
- Author(s)
  E.Shamoto
- Journal Title
  
  Annals of the CIRP 54/・1(to be published)
- Data Source
  KAKENHI-PROJECT-16656051
[Journal Article] 高硬度金型の超精密微細加工を実現する楕円振動切削加工技術の開発2004
- Author(s)
  社本英二
- Journal Title
  
  型技術 Vol.19 No.12
  
  Pages: 55-58
- Data Source
  KAKENHI-PROJECT-16656051
[Journal Article] 高硬度金型の超精密微細加工を実現する楕円振動切削加工技術の開発2004
- Author(s)
  社本英二
- Journal Title
  
  型技術 Vol.19 No.12
  
  Pages: 55-58
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision/Micro Die and Mould Technology to Realize Impossible Manufacturing2004
- Author(s)
  E.Shamoto, N.Suzuki
- Journal Title
  
  Die and Mould Technology Vol.19 No.10
  
  Pages: 46-47
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Cutting process control in elliptical vibration cutting2004
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Akio Kato, Kazuhiko Yanagida
- Journal Title
  
  Proc.of 2004 JSPE Autumn Conference
  
  Pages: 687-688
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of an Elliptical Vibration Milling Machine2004
- Author(s)
  Toshimichi MORIWAKI, Eiji SHAMOTO, YoungChan SONG, Seido KOHDA
- Journal Title
  
  Annals of the CIRP Vol.53/1
  
  Pages: 341-344
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of Elliptical Vibration Cutting Technology to Realize Ultraprecision Micro Machining of Hard Dies and Moulds2004
- Author(s)
  E.Shamoto, N.Suzuki, S.Hamada
- Journal Title
  
  Die and Mould Technology Vol.19 No.12
  
  Pages: 55-58
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 楕円振動切削加工法における切削プロセス制御の試み2004
- Author(s)
  社本英二
- Journal Title
  
  2004年度精密工学会秋季大会学術講演会講演論文集
  
  Pages: 687-688
- NAID
  130004655699
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of Ultraprecision Alignment Table Driven by Means of Walking Drive2004
- Author(s)
  Eiji Shamoto, et al.
- Journal Title
  
  Proc.of 2003 JSPE Spring Conference
  
  Pages: 891-892
- NAID
  130004657788
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Machining of Sintered Tungsten Carbide by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  N.Suzuki, S.Masuda, E.Shamoto
- Journal Title
  
  Proc.of 4th International Conference and 6th annual general meeting of the European Society for Precision Engineering and Nanotechnology(EUSPEN)
  
  Pages: 187-188
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision/Micro Machining of Dies and Moulds by Applying Elliptical Vibration Cutting2004
- Author(s)
  E.Shamoto, N.Suzuki
- Journal Title
  
  Mechanical Engineering Vol.52 No.13
  
  Pages: 23-27
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 不可能を可能にする超精密・超微細金型技術2004
- Author(s)
  社本英二
- Journal Title
  
  型技術 Vol.19 No.10
  
  Pages: 46-47
- Data Source
  KAKENHI-PROJECT-16656051
[Journal Article] Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  Chun-Xiang Ma, Eiji Shamoto, Toshimichi Moriwaki
- Journal Title
  
  Materials Science Forum Vols.471-472
  
  Pages: 396-400
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 超音波楕円振動切削による超精密・微細金型加工技術2004
- Author(s)
  社本英二
- Journal Title
  
  機械技術 Vol.52 No.13
  
  Pages: 23-27
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Brittle Materials by Applying Ultrasonic Elliptical Vibration Cutting2004
- Author(s)
  Norikazu Suzuki, Shinsuke Masuda, Makoto Haritani, Eiji Shamoto
- Journal Title
  
  Proc.Of the 2004 International Symposium on Micro-Nano Mechatronics and Human Science-From Micro & Nano Scale Systems to Robotics & Mechatronics Systems
  
  Pages: 133-138
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Study of machining accuracy in ultrasonic elliptical vibration cutting2004
- Author(s)
  Chunxiang Ma, Eiji Shamoto, Toshimichi Moriwaki, Lijiang Wang
- Journal Title
  
  International Journal of Machine Tools and Manufacture 44
  
  Pages: 1305-1310
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Proposal of a New Fluid Bearing Utilizing Surface Tension2004
- Author(s)
  Eiji Shamoto, Kento Hashimoto, Norikazu Suzuki
- Journal Title
  
  Proc.of 2003 JSPE Spring Conference
  
  Pages: 621-622
- NAID
  130004656226
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 不可能を可能にする超精密・超微細金型技術2004
- Author(s)
  社本英二
- Journal Title
  
  型技術 Vol.19 No.10
  
  Pages: 46-47
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 超音波楕円振動切削による超精密・微細金型加工技術2004
- Author(s)
  社本英二
- Journal Title
  
  機械技術 Vol.52 No.13
  
  Pages: 23-27
- Data Source
  KAKENHI-PROJECT-16656051
[Journal Article] 表面張力を利用した新しい流体軸受の提案2004
- Author(s)
  社本英二
- Journal Title
  
  2003年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 621-622
- NAID
  130004656226
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Walking Driveに基づく超精密アライメント装置の開発-画像処理を利用した並進・回転方向の同時位置決め2004
- Author(s)
  社本英二
- Journal Title
  
  2003年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 891-892
- NAID
  130004656376
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 傾斜型楕円振動切削加工法の提案とその基本特性2003
- Author(s)
  社本英二
- Journal Title
  
  精密工学会誌 69・7
  
  Pages: 970-975
- NAID
  110001368499
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Intelligent Recognition of End Milling Conditions Based on Cutting Force Model-Development of monitoring method without any databases2003
- Author(s)
  Eiji SHAMOTO, Rei HINO, Masayuki UMESAKI, Toshimichi MORIWAKI
- Journal Title
  
  JSME Series C Vol.69, No.683
  
  Pages: 1927-1932
- NAID
  110002379081
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Machining of Hard Materials by Applying Ultrasonic Elliptical Vibration Cutting2003
- Author(s)
  E.Shamoto
- Journal Title
  
  Int.Progress on Advanced Optics and Sensors
  
  Pages: 195-201
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 機械式円振動発生機構を利用した楕円振動切削加工機の開発2003
- Author(s)
  社本英二
- Journal Title
  
  精密工学会誌 69・4
  
  Pages: 542-548
- NAID
  10009889294
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Proposal of Oblique Type of Elliptical Vibration Cutting and Its Basic Performance2003
- Author(s)
  Eiji SHAMOTO, Young Chan SONG, Kengo SASSA, Hideki YOSHIDA, Rei HINO, Toshimichi MORIWAKI
- Journal Title
  
  JSPE Vol.69, No.7
  
  Pages: 970-975
- NAID
  110001368499
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Estimation of Thermal Deformation of Machine Tool by Utilizing Available Information in CNC Unit2003
- Author(s)
  Eiji SHAMOTO, Rei HINO, Tatsuya TOMIE, Yosuke MATSUBARA, Toshimichi MORIWAKI
- Journal Title
  
  JSME Series C Vol.69, No.686
  
  Pages: 2775-2782
- NAID
  110002379197
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] CNC装置の内部情報を利用した工作機械の熱変形推定2003
- Author(s)
  社本英二
- Journal Title
  
  日本機械学会論文集C編 69・686
  
  Pages: 2775-2782
- NAID
  110002379197
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] 切削力モデルに基づくエンドミル加工状態の知的認識-データベースを必要としない手法の開発2003
- Author(s)
  社本英二
- Journal Title
  
  日本機械学会論文集C編 69・683
  
  Pages: 1927-1932
- NAID
  110002379081
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Tool Path Generation with Immediate Offset Method (1st Report)-Proposal of fundamental procedure2003
- Author(s)
  Rei HINO, Eiji SHAMOTO, Toshimichi MORIWAKI
- Journal Title
  
  JSPE Vol.69, No.6
  
  Pages: 781-787
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of Elliptical Vibration Cutting Machine by Utilizing Mechanical Vibrator2003
- Author(s)
  Eiji SHAMOTO, YoungChan SONQ Hideki YOSHIDA, Norikazu SUZUKI, Toshimichi MORIWAKI, Seido KOHDA, Tetsuji YAMANISHI
- Journal Title
  
  JSPE Vol.69, No.4
  
  Pages: 542-548
- NAID
  110001373530
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Machining of Hard Materials by Applying Ultrasonic Elliptical Vibration Cutting2003
- Author(s)
  Eiji SHAMOTO, Norikazu SUZUKI
- Journal Title
  
  Int.Progress on Advanced Optics and Sensors
  
  Pages: 195-201
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision/Micro Machining of Die Materials by Applying Elliptical Vibration Cutting2003
- Author(s)
  Norikazu SUZUKI, Eiji SHAMOTO, et al.
- Journal Title
  
  Die and Mould Technology Vol.18, No.13
  
  Pages: 16-17
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Ultraprecision Micromachining of Hardened Steel by Applying Ultrasonic Elliptical Vibration Cutting2003
- Author(s)
  Norikazu SUZUKI, Akihiro NAKAMURA, Eiji SHAMOTO, Kazuhiro HARADA, Makoto MATSUO, Michio OSADA
- Journal Title
  
  2003 International Symposium on Micromechatronics and Human Science(MHS2003)
  
  Pages: 221-226
- NAID
  120000973976
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Journal Article] Development of 3 DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces
- Author(s)
  Eiji Shamoto, Norikazu Suzuki, Eiji Tsuchiya, Y.Hori, H.Inagaki, K.Yoshino
- Journal Title
  
  Annals of the CIRP Vol.54/1(to be published)
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360069
[Presentation] 新しいプロセスダンピングモデルに基づく旋削プロセスの時間領域・周波数領域シミュレーション2021
- Author(s)
  藤中翼，中之宮知樹，鈴木教和，社本英二
- Organizer
  2021年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] プロセスダンピングの影響を考慮した5軸ボールエンドミル切削の時間領域シミュレーション2021
- Author(s)
  塚本有美，鈴木教和，社本英二，入野成広，今別府泰宏
- Organizer
  2021年度精密工学会春季大会，第28回学生会員卒業研究発表講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] 主軸回転速度変動を利用したミリングシミュレーションにおけるパラメータの高速高精度同定2021
- Author(s)
  三輪智，鈴木教和，社本英二，高幣一樹
- Organizer
  2021年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Time domain simulation of dynamic corner milling process considering chatter vibration with finite amplitude2021
- Author(s)
  Norikazu Suzuki, Hiroki Hayashi, Eiji Shamoto, Naruhiro Irino, Yasuhiro Imabeppu
- Organizer
  Proceedings of the ASME 2021 16th International manufacturing Science and Engineering Conference, MSEC2021
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Analytical study on identification of milling simulation parameters by utilizing spindle speed variation method2021
- Author(s)
  Satoshi MIWA, Norikazu SUZUKI, Kazuki TAKAHEI, Eiji SHAMOTO
- Organizer
  The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Time domain simulation of turning process considering amplitude-dependency in process damping2021
- Author(s)
  Tsubasa Fujinaka, Norikazu Suzuki, Tomoki Nakanomiya, Eiji Shamoto
- Organizer
  The 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Chatter Stability Prediction of Cutting Process With Process Damping Utilizing Finite Element Analysis2020
- Author(s)
  Norikazu Suzuki, Tomoki Nakanomiya, Eiji Shamoto
- Organizer
  Proceedings of the international Conference on Leading Edge Manufacturing/Materials & Processing (LEM&P 2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Fast Identification of Cutting Process with Sensor-Integrated Disturbance Observer2019
- Author(s)
  K. Takahei, S. Ohno, N. Suzuki, E. Shamoto
- Organizer
  Proceedings of 15th International Conference on High Speed Machining (HSM2019) in Czech
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] VARIABLE HELIX CUTTER DESIGN TO SUPPRESS REGENERATIVE EFFECT2019
- Author(s)
  Norikazu Suzuki , Rikiya Ishiguro, Tomoki Morita, Eiji Shamoto
- Organizer
  Proceedings of the ASME 2019 14th International manufacturing Science and Engineering Conference, MSEC2019
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] 有限要素法解析によるプロセスダンピングパラメータ推定と安定性解析2019
- Author(s)
  中之宮知樹，鈴木教和，社本英二，髙橋亘
- Organizer
  2019年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19H02041
[Presentation] Ni基耐熱合金の従動式ロータリミリング技術の開発2018
- Author(s)
  加藤裕也，鈴木教和，社本英二，内木幸夫，高木優次
- Organizer
  2018年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] A Novel Technique for In-Situ Observation of Local Polishing Efficiency by Utilizing Infrared Thermography2018
- Author(s)
  Norikazu Suzuki, Takahiro Misono, Shintaro Goto, Eiji Shamoto, Hozumi Yasuda, Yoshihiro Mochizuki
- Organizer
  International Conference on Planarization/CMP Technology (ICPT2018 in Seoul Korea)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 除去加工による3次元積層造形物の後処理技術に関する基礎的研究2018
- Author(s)
  大庭孝之，鈴木教和，社本英二
- Organizer
  2018年度精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Development of a post-processing system of resin organ models by utilizing 3-axis CNC abrasive machining2018
- Author(s)
  Norikazu Suzuki, Takayuki Ohba, Eiji Shamoto, Masahiro Oda, Kensaku Mori, Yoshimi Takeuchi
- Organizer
  17th International Conference on Precision Engineering (ICPE2018 in Kamakura)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] DEVELOPMENT OF A SPRT MILLING TECHNOLOGY FOR NI-BASED SUPER ALLOY2018
- Author(s)
  Norikazu Suzuki, Yuya Kato, Eiji Shamoto, Yukio Naiki, Yuji Takagi
- Organizer
  2018 International Symposium on Flexible Automation
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Simulation-based Concurrent Identification of Milling Process and Mechanical Dynamics with Sensor-integrated Multi-inertial System Disturbance Observer2017
- Author(s)
  K. Takahei, T. Fujita, R. Ikeda, N. Suzuki, S. Ohno, E. Shamoto
- Organizer
  the 9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] DESIGN OF ANISOTROPIC BORING TOOLS WITH L/D = 10 FOR CHATTER FREE CUTTING2017
- Author(s)
  Wataru Takahashi, Norikazu Suzuki, Eiji Shamoto
- Organizer
  ASME 2017 International manufacturing Science and Engineering Conference, MSEC2017
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 切削加工におけるびびり振動抑制を実現する逃げ面テクスチャの提案2017
- Author(s)
  井桁秀徳，鈴木教和，社本英二
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶応義塾大学
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] びびり振動を回避する多段インサートエンドミルのピッチ角設計2017
- Author(s)
  鈴木教和，森田知樹，社本英二
- Organizer
  2017年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] モデルベース逆解析を利用したミリングプロセスのセンサレス推定2017
- Author(s)
  大野彰也，池田遼輔，鈴木教和，社本英二
- Organizer
  2017年砥粒加工学会卒業研究発表会
- Place of Presentation
  ホテルプラザ勝川
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Influence of flank face interference on micro/nano structure fabrication in elliptical vibration cutting2017
- Author(s)
  張建国，鈴木教和，社本英二
- Organizer
  2017年度砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] ボールねじ駆動系の多慣性モデルを考慮した外乱力推定と切削シミュレーションを利用したミリングプロセスの知的同定2017
- Author(s)
  大野彰也，鈴木教和，社本英二，池田遼輔，高幣一樹，藤田智哉
- Organizer
  2017年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] ミリングにおける外乱力推定と切削シミュレーションを利用した知的プロセス同定2017
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶応義塾大学
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] モデルベースシミュレーションを利用した知的切削プロセス同定技術の開発2016
- Author(s)
  鈴木教和，池田遼輔，社本英二
- Organizer
  第１７回国際工作機械技術者会議ポスターセッション
- Place of Presentation
  東京ビッグサイト
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] CNCの内部情報を利用した柔軟な機械構造を伴うエンドミルプロセスのモデルベースパラメータ同定2016
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  第17回公益社団法人計測自動制御学会システムインテグレーション部門　講演会　SI2016
- Place of Presentation
  札幌コンベンションセンター
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] 不等リードエンドミルを用いた切削プロセスのSemidiscrete time domain solution2016
- Author(s)
  石黒力也，鈴木教和，社本英二
- Organizer
  2016年度精密工学会春季大会学術講演会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 難削材加工に適応可能な従動式ロータリミーリンク工具の開発2016
- Author(s)
  加藤裕也，鈴木教和，社本英二，内木幸夫，高木優次
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] サーボ系の外乱力推定と切削シミュレーションを利用したモデルベースプロセス同定2016
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  2016年度精密工学会春季大会学術講演会
- Place of Presentation
  東京理科大
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 有限の振動変位を持つびびり振動を考慮した切削力モデルに関する基礎研究2016
- Author(s)
  井桁秀徳，鈴木教和，社本英二
- Organizer
  2016年度精密工学会秋季大会学術講演会
- Place of Presentation
  茨城大学
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] Primitive study on model-based process identification by utilizing force estimation techniques2016
- Author(s)
  Norikazu SUZUKI, Ryosuke IKEDA, Eiji SHAMOTO
- Organizer
  Proceedings of the ASME 2016 International manufacturing Science and Engineering Conference, MSEC2016
- Place of Presentation
  Virginia Tech
- Year and Date
  2016-06-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04243
[Presentation] CNCの内部情報を利用した機械構造伝達関数の新しい推定法2015
- Author(s)
  池田遼輔，鈴木教和，佐野憲司，社本英二
- Organizer
  2015年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] A NEW CONTACT MODEL OF PAD SURFACE ASPERITIES UTILIZING MEASURED GEOMETRICAL FEATURES2015
- Author(s)
  Yohei Hashimoto, Shingo Oshika, Norikazu Suzuki, Eiji Shamoto
- Organizer
  ICPT2015 in Arizona
- Place of Presentation
  Arizona, US
- Year and Date
  2015-09-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] ロバストなびびり振動抑制を実現する工具設計理論の実験的検証2015
- Author(s)
  石黒力也，鈴木教和，小島拓也，社本英二
- Organizer
  日本機械学会2015年度年次大会
- Place of Presentation
  北海道大学
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] Estimation of transfer function of flexible mechanical structures by utilizing cutting force model and observer technique2015
- Author(s)
  Norikazu SUZUKI, Ryosuke IKEDA, Kenji SANO and Eiji SHAMOTO
- Organizer
  LEM21 in Kyoto
- Place of Presentation
  Kyoto
- Year and Date
  2015-10-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] オブザーバ技術と動的切削力推定を利用した柔軟構造伝達特性の推定2015
- Author(s)
  池田遼輔，鈴木教和，社本英二
- Organizer
  計測自動制御学会　システムインテグレーション部門　講演会
- Place of Presentation
  名古屋国際会議場
- Year and Date
  2015-12-14
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 旋削加工におけるプロセスダンピングのびびり振動の安定性に対する影響2014
- Author(s)
  内山大輔，鈴木教和，社本英二
- Organizer
  精密工学会
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 研磨圧力シミュレーションにおいて各種モデル化が解析精度に与える影響2014
- Author(s)
  橋本洋平，鈴木教和，沈閲，社本英二
- Organizer
  2014年度精密工学会秋季大会学術講演会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-09-17
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 耐熱合金の高速セラミックミーリングにおける工具損耗メカニズム2014
- Author(s)
  鈴木教和，延命里紗，橋本洋平，社本英二，波多野祐規
- Organizer
  2014年度精密工学会秋季大会学術講演会
- Place of Presentation
  鳥取大学
- Year and Date
  2014-09-16
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 切削加工におけるびびり振動を抑制するための柔軟構造の動剛性設計2014
- Author(s)
  鈴木教和，渡邉涼，西村浩平，社本英二
- Organizer
  第15回計測自動制御学会システムインテグレーション部門講演会
- Place of Presentation
  東京ビッグサイト
- Year and Date
  2014-12-17
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 楕円振動切削における振幅変調法を利用した焼入れ鋼のナノ精度微細加工2014
- Author(s)
  鈴木教和，張建国，社本英二
- Organizer
  日本機械学会第10回生産加工・工作機械部門講演会
- Place of Presentation
  徳島大学
- Year and Date
  2014-11-15
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] High efficiency elliptical vibration cuttign of steel using large nose radius single crystal diamond tool2014
- Author(s)
  Yilong Wang, Norikazu Suzuki, Eiji Shamoto
- Organizer
  精密工学会
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] Polishing pressure distribution analysis in CMP process with airbag type polishing head2013
- Author(s)
  Norikazu Suzuki, Masakazu Asaba, Akimitsu Kato, Eiji Shamoto, Hozumi Yasuda, Satoru Yamaki
- Organizer
  International Conference on Planarization/CMP Technology
- Place of Presentation
  Hsinchu, Taiwan
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] Identification of Nonlinear Viscoelasticity of CMP Pads2013
- Author(s)
  Norikazu Suzuki, Akimitsu Kato, Masakazu Asaba, Eiji Shamoto
- Organizer
  Advanced Metallization Conference
- Place of Presentation
  Tokyo, Japan
- Data Source
  KAKENHI-PROJECT-25289015
[Presentation] 従動式ロータリ工具を用いた難削材のミリンダ加工に関する研究2012
- Author(s)
  安然, 鈴木教和, 社本英二, 鵜飼晃太, 吉田浩之, 長谷川侑, 石川陽一, 山田祥雄
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-15
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] Proposal and Analysis of an Innovative Liquid Bearing Utilizing Traveling Waves2012
- Author(s)
  Ying-Jie Li, Burak Sencer and Eiji Shamoto
- Organizer
  ICPT2012 (The 5th International Conference on Positioning Technology 2012)
- Place of Presentation
  Kaohsiung, Taiwan
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 進行波を利用した非接触流体軸受に関する研究-モジュール式の進行波圧電アクチュエータ及び精密スライダの開発2012
- Author(s)
  小松裕貴, 加藤大香士, Sencer Burak, 鈴木教和, 社本英二
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 複数モードの再生効果を同時抑制する不等ピッチ工具の新しい設計法2012
- Author(s)
  小島拓也, 鈴木教和, 社本英二
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 工具軌跡/姿勢の最適化による再生びびり振動回避に関する研究一回避手法の提案と旋削加工への応用2012
- Author(s)
  社本英二, 藤巻俊介, 鈴木教和
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 進行波を利用した非接触流体軸受に関する研究- モジュール式の進行波圧電アクチュエータ及び精密スライダの開発2012
- Author(s)
  小松裕貴,加藤大香士, Sencer Burak,鈴木教和,社本英二
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] Development of a Synchronization Controller for Twin Servo Systems2012
- Author(s)
  Sencer B., Shamoto E., Mori T., Yoshikawa S.
- Organizer
  精密工学会春季大会
- Place of Presentation
  首都大学東京(東京都)
- Year and Date
  2012-03-14
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 次世代のエコマシニング技術を目指して2010
- Author(s)
  社本英二
- Organizer
  精密工学会秋季大会オーガナイズドセッション「エコマシニング
- Place of Presentation
  名古屋大学(愛知県)
- Year and Date
  2010-09-29
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 多段振動型気体軸受の提案2010
- Author(s)
  社本英二,小松裕貴,山路文恵,大脇圭裕,鈴木教和
- Organizer
  精密工学会秋季大会
- Place of Presentation
  名古屋大学(愛知県)
- Year and Date
  2010-09-28
- Data Source
  KAKENHI-PROJECT-22360070
[Presentation] 200kHzの高周波楕円振動工具の開発2009
- Author(s)
  鈴木教和, 丸小慶介, 社本英二
- Organizer
  日本機械学会東海支部第58期総会講演会
- Place of Presentation
  岐阜大学
- Year and Date
  2009-03-18
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 板材に対する高精度高能率加工を実現する両面同時フライス加工技術の開発-左右主軸回転数差による再生型びびり振動の抑制-2009
- Author(s)
  社本英二, 西村浩平, 倉田祐輔, 鈴木教和, 森達也
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  中央大学
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 200kHzの高周波楕円振動工具の開発2009
- Author(s)
  鈴木教和, 丸小慶介, 社本英二
- Organizer
  日本機械学会東海支部第58期総会講演会
- Place of Presentation
  岐阜大学
- Year and Date
  2009-03-18
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] A New Method to Control Work-in-Process Inventory for High Manufacturing Productivity2008
- Author(s)
  Rei Hino, Norikazu Suzuki, Eiji Shamoto
- Organizer
  The 41st CIRP Conference on Manufacturing Systems
- Place of Presentation
  東京大学
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision/ Micro Machining of Hard /Brittle Materials2008
- Author(s)
  Eiji Shamoto, Norikazu Suzuki
- Organizer
  6th CHINA-JAPAN international Conference on Ultra-Precision Machining
- Place of Presentation
  Hunan University, Changsha, China
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Mohammad Javad Nategh : FE Analysis of One Directional and Elliptical Ultrasonic Vibration-Assisted Cutting of IN7382008
- Author(s)
  Saiid Amini, Eiji Shamoto, Norikazu Suzuki
- Organizer
  International Conference on Advances in Materials and Processing Technologies 2008 (AMPT2008)
- Place of Presentation
  Manama, Kingdom of Bahrain
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Identification of transfer function of mechanical structure by inverse analysis of regenerative chatter vibration in end milling2008
- Author(s)
  Norikazu SUZUKI, Yusuke KURATA, Rei HINO, Eiji SHAMOTO
- Organizer
  the 3rd international CIRP high performance cutting conference
- Place of Presentation
  Dublin, Ireland
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] FE Analysis of One Directional and Elliptical Ultrasonic Vibration-Assisted Cutting of IN7382008
- Author(s)
  Saiid Amini, Eiji Shamoto, Norikazu Suzuki, Mohammad Javad Nategh
- Organizer
  International Conference on Advances in Materials and Processing Technologies 2008 (AMPT2008)
- Place of Presentation
  Manama, Kingdom of Bahrain
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Elliptical Vibration Cutting of Hard Mold Materials2008
- Author(s)
  Eiji Shamoto and Norikazu Suzuki
- Organizer
  OSA's 92nd Annual Meeting and Exhibit
- Place of Presentation
  Rochester NY, USA
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 楕円振動切削によるタングステン合金の超精密微細加工(第3報)-工具寿命の延長に関する検討-2008
- Author(s)
  鈴木, 江端, 社本
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] Development of Elliptical Vibration Cutting Technology and Its Application to Ultraprecision / Micro Machining of Hard / Brittle Materials2008
- Author(s)
  Eiji Shamoto and Norikazu Suzuki
- Organizer
  6th CHINA-JAPAN international Conference on Ultra-Precision Machining
- Place of Presentation
  Hunan University, Changsha, China
- Year and Date
  2008-11-24
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 楕円振動切削によるタングステン合金の超精密微細加工(第3報)-工具寿命の延長に関する検討2008
- Author(s)
  鈴木, 江端, 社本
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] これからのものづくりを支える超精密技術2007
- Author(s)
  社本英二
- Organizer
  テクノフェア名大2007 ミニ講演会
- Place of Presentation
  名古屋大学IB電子情報館
- Year and Date
  2007-09-07
- Data Source
  KAKENHI-PROJECT-19656044
[Presentation] 超精密・マイクロ機械加工技術とその展開2007
- Author(s)
  社本英二
- Organizer
  日本機械学会ワークショップW01「機械工学におけるマイクロ・ナノ工学」
- Place of Presentation
  関西大学千里山キャンパス第2学舎3号館
- Year and Date
  2007-09-10
- Data Source
  KAKENHI-PROJECT-19656044
[Presentation] 放物線振動切削加工法の提案2007
- Author(s)
  社本, 鈴木, 菊地, 土屋, 浜田
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  北海道旭川市
- Year and Date
  2007-09-12
- Data Source
  KAKENHI-PROJECT-19360064
[Presentation] 難削材の高能率加工を実現する革新的ロータリミリング工具の開発
- Author(s)
  鈴木教和，鈴木徹，社本英二，山崎真，堀池伸和
- Organizer
  第16回国際工作機械技術者会議　ポスターセッション
- Place of Presentation
  東京ビッグサイト
- Year and Date
  2014-11-01 – 2014-11-02
- Data Source
  KAKENHI-PROJECT-25289015

1. MORIWAKI. T (00031104)

# of Collaborated Projects: 15 results

# of Collaborated Products: 0 results
2. HINO Rei (80273762)

# of Collaborated Projects: 13 results

# of Collaborated Products: 23 results
3. SUZUKI Norikazu (00359754)

# of Collaborated Projects: 12 results

# of Collaborated Products: 113 results
4. SUGIMURA N (80135813)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
5. SHIBASAKA Toshiro (80094530)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
6. OKUDA K (50124061)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. IKAI Y (40031108)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. TOMITA Y (10031147)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MANABE Keiji (90209677)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. YOKOYAMA K (00018673)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. NAKAI Yoshikazu (90155656)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. FUJII Yoshikazu (80238534)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. NAKAMOTO Takeshi (30198262)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. SUZUKI Hirofumi (20282098)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. 岩田一明 (30031066)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. OTA Masato

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. TANAKA Katsutoshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. UDA Yutaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. YAMAUCHI Akira

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. IBA Goji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. 和田龍児

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. WADA R

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. SENCER Burak

# of Collaborated Projects: 0 results

# of Collaborated Products: 9 results

Shamoto Eiji 社本 英二

SHAMOTO Eiji 社本 英二

SHAMOTO E 社本 英二

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of "Traveling Wave" Air Bearing which Exceeds Limitation of Traditional PrinciplesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of parabolic vibration cutting device to realize significant reduction of cutting forcePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

表面張力を利用した真空内非接触流体軸受の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

放物線振動切削加工法の提案Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

楕円振動切削を利用した切削プロセス制御の試みPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of ultrapretision alignment table which can be used in vacuum by means of walking drivePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

DEVELOPMENT OF ULTRAPRECISION ALIGNMENT TABLE BY MEANS OF WALKING DRIVEPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Shamoto Eiji 社本英二

SHAMOTO Eiji 社本英二

SHAMOTO E 社本英二