YASUI Heiji 安井平司

… Alternative Names

安井平司ヤスイヘイジ

Less

Researcher Number	30040398
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2006: Kumamoto University, Graduate School of Science and Technology, Professor, 大学院自然科学研究科, 教授 1995 – 2005: 熊本大学, 工学部, 教授 1987: 熊本大学, 工学部, 教授 1986: 熊本大, 工学部, 教授
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / Production engineering/Processing studies / 機械工作
Keywords	Principal Investigator 研削条件 / 高能率化 / 磁気ディスク基板 / 砥石粒度 / 粗粒ダイヤモンド砥石 / 砥石作業面 / ダイヤモンド砥石 / 延性モード研削 / 超平滑研削 / ファインセラミックス … More / ナノメータ / 発生熱量 / 沸騰 / 研削温度 / 湿式研削 / 超平滑 / ポリシング / 超高記録密度 / magnetic disk substrate / polisher / gearless workpiece rotation / new method / ultra-high speed / ultra-high pressure / high removal rate / double surface polishing / ポリシャ / 無歯車工作物回転 / 新方式 / 超高速度 / 超高圧力 / 超高除去速度 / 両面研磨 / Grinding conditions / Difficult-to-cut metals / Ceramics / Ultra-high revolution spindle / Trial manufacturing / Vertical grinder / High removal rate / New concept / Ultra-smoothness grinding method / 炭化けい素セラミック / 超高速スピンドル / 立軸研削盤 / 新概念研削方法 / 超平滑研削盤 / 難削金属 / セラミックス / 超高回転スピンドル / 試作 / 立型研削盤 / 高除去速度 / 新概念 / 超平滑研削加工法 / Grinding Condition / Grinding wheel Surface / Coarse Grain / Diamond wheel / High Removal Rate / Ductile-mode Grinding / Ultra-Smoothness Grinding / Fine ceramics / 粗粒ダイヤモンド砥粒 / ファインセラミック / 研磨レス研削 / GRINDING CONDITION / GRINDING WHEEL SURFACE / COARSE GRAIN / DIAMOND WHEEL / HIGH REMOVAL RATE / DUCTILE-MODEGRINDING / ULTRA-SMOOTHNESS GRINDING / FINE CERAMICS / 粗粒 / Plastics / Soft metal / Grain boundary step / Micro-hole / Scratch / Nanometer / Attainable limiting surface roughness / Ultra precision cutting / バイト先端形状 / プラスチック / 軟質金属 / 粒界段差 / 微小痕 / スクラッチ / 到達限界表面粗さ / 超精密切削 / CBN砥石 / 研削液 / 接触孤 / 熱流入割合 / 乾式研削条件 / 接触圧 / 研削焼け / 超精密丸駒チップ / 刃先回転精度修正 / 丸駒型 / 超硬合金チップ / 切れ刃運動型切削 / 超長寿命 / 難削材 / 超精密切削加工 / ポリシング条件 / 酸化セリウム / コロイダルシリカ / テラバイト / ポリシング相対速度 / ポリシング圧力 / 端面ダレ / ギガバイト Less

切れ刃運動型超長寿命ナノメータ超精密切削加工技術の開発Principal Investigator
- Principal Investigator
  
  安井平司
- Project Period (FY)
  2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kumamoto University
Development of double side surface ultra-smoothness polishing technique by means of gearless workpiece rotation method based on new conceptPrincipal Investigator
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kumamoto University
Trial Manufacturing of Ultra-high Removal Nanometer-Smoothness Grinding Machine Based on New ConceptPrincipal Investigator
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kumamoto University
Ultra-smoothness Grinding Mechanism of Fine Ceramics with Metal Bonded #140 Diamond WheelPrincipal Investigator
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kumamoto University
HIGH REMOVAL ULTRA-SMOOTHNESS GRINDING OF VARIOUS KINDS OF FINE CERAMICS WITH #140-MESHMETAL BONDED DIAMOND WHEELPrincipal Investigator
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KUMAMOTO UNIVERSITY
Experimental Investigation of the Attainable Limiting Surface Roughness in the Ultra Precision Cutting of Various Kinds of MaterialsPrincipal Investigator
- Principal Investigator
  
  YASUI Heiji
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KUMAMOTO UNIVERSITY
次世代用磁気ディスク基板のポリシング法の研究Principal Investigator
- Principal Investigator
  
  安井平司
- Project Period (FY)
  1996
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kumamoto University
次世代用磁気ディスク基板のポリシング法の研究Principal Investigator
- Principal Investigator
  
  安井平司
- Project Period (FY)
  1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kumamoto University
湿式研削における熱流入割合の解析Principal Investigator
- Principal Investigator
  
  安井平司
- Project Period (FY)
  1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kumamoto University
湿式研削における焼け発生予測の研究Principal Investigator
- Principal Investigator
  
  安井平司
- Project Period (FY)
  1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kumamoto University

All 2007 2006 2005 2004 2003

All Journal Article

[Journal Article] Investigation on Polisher Life in Ultra-high Pressure and Speed Polishing of Aluminum Type of Magnetic Disk Substrate ( 1^<st> Report )-In Case of Single Nap Layer Type of Polisher-2007
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Seiji MATSUKAWA, Yutaka YAMASAKI
- Journal Title
  
  Journal of the Japan Society for Precision Engineering Vol.73, No. 1
  
  Pages: 107-111
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] アルミ磁気ディスク基板の超高圧力・超高速度ポリシングにおけるポリシャ寿命の検討(第1報)- -層ナップ構造ポリシャの場合 -2007
- Author(s)
  安井平司, 山口寛太, 松川誠治, 山崎穣
- Journal Title
  
  精密工学会誌 Vol. 73・No. 1
  
  Pages: 107-111
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Polisher Life in Ultra-smoothness Polishing of Magnetic Disk Substrate Using New Double Side Surface Polishing Machine2006
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Takuya NIKI, Shingo OTSUKA, Tomohiko NAGARA, Hisaaki KUBOTA
- Journal Title
  
  Proc. ASPE 21 Annual Meeting
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Polisher Life in Ultra-smoothness Polishing of Magnetic Disk Substrate Using New Double Side Surface Polishing Machine2006
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Takuya NIKI, Shingo OTSUKA, Tomohiko NAGATA, Hisaaki KUBOTA
- Journal Title
  
  Proc. American Society for Precision Engineering 21st Annual Meeting
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Possibility of Ultra-Ultra High Pressure Polishing of Magnetic Disk Substrate2006
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Takuya NIKI
- Journal Title
  
  Proc. 6th International Conference and 10th annual general meeting of the european society for precision engineering and nanotechnology
  
  Pages: 184-187
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Possibility of Ultra-Ultra High Pressure Polishing of Magnetic Disk Substrate2006
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Takuya NIKI
- Journal Title
  
  Proc.6th International Conference and 10th annual general meeting of the european society for precision engineering and nanotechnology
  
  Pages: 184-187
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Polisher Life in Ultra-smoothness Polishing of Magnetic Disk Substrate Using New Double Side Surface Polishing Machine2006
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Takuya NIKI, Shingo OTSUKA, Tomohiko NAGATA, Hisaaki KUBOTA
- Journal Title
  
  Proc. ASPE 21 Annual Meeting
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Influence of Adhesion on Surface Roughness in Ultra-Precision Cutting of Stainless Steels with Coated-Cemented-Carbide Tool2005
- Author(s)
  Heiji YASUI, Shigehiko SAKAMOTO, Hirofumi HAYASHI, Takafumi SHINGAI
- Journal Title
  
  Proc.ASPE 20th Annual Meeting
- Data Source
  KAKENHI-PROJECT-17656053
[Journal Article] Polisher Life in Ultra-High Pressure and Ultra-High Speed Polishing of NiP Plated Aluminum Magnetic Disk Substrate2005
- Author(s)
  Heiji YASUI, Yutaka YAMASAKI, Kanta YAMAGUCHI, Seiji MATSUKAWA, Shoji KURIBAYASHI, Takuya NIKI
- Journal Title
  
  Proc.ASPE 20th Annual Meeting
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Development of Gearless Polishing Machine for High Removal Rate and Ultra-Smoothness Double Side Surface Polishing2005
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Shouji KURIBAYASHI
- Journal Title
  
  Proc. 5th International Conference and 7th annual general meeting of the european society for precision engineering and nanotechnology
  
  Pages: 465-468
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Development of Gearless Polishing Machine for High Removal Rate and Ultra-Smoothness Double Side Surface Polishing2005
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Shouji KURIBAYASHI
- Journal Title
  
  Proc. Euspen International Conference
  
  Pages: 465-468
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Polisher Life in Ultra-High Pressure and Ultra-High Speed Polishing of NiP Plated Aluminum Magnetic Disk Substrate2005
- Author(s)
  Heiji YASUI, Yutaka YAMASAKI, Kanta YAMAGUCHI, Seiji MATSUKAWA, Shoji KURIBAYASHI, Takuya NIKI
- Journal Title
  
  Proc. American Society for Precision Engineering 20th Annual Meeting
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Development of Gearless Polishing Machine for High Removal Rate and Ultra-Smoothness Double Side Surface Polishing2005
- Author(s)
  Heiji YASUI, Kanta YAMAGUCHI, Shouji KURIBAYASHI
- Journal Title
  
  Proc.Euspen International Conference
  
  Pages: 465-468
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Cutting Characteristics in Edge Moving Type of Long Life Precision Cutting Method2005
- Author(s)
  Heiji YASUI, Shingo HODA
- Journal Title
  
  Proc.Euspen International Conference
  
  Pages: 595-598
- Data Source
  KAKENHI-PROJECT-17656053
[Journal Article] Possibility of Ultra-Precision Cutting of Titanium Alloy with Diamond Tool2005
- Author(s)
  Shigehiko SAKAMOTO, Akira SHINOZAKI, Heiji YASUI
- Journal Title
  
  Proc.ASPE 20th Annual Meeting
- Data Source
  KAKENHI-PROJECT-17656053
[Journal Article] Polisher Life in Ultra-High Pressure and Ultra-High Speed Polishing of NiP Plated Aluminum Magnetic Disk Substrate2005
- Author(s)
  Heiji YASUI, Yutaka YAMASAKI, Kanta YAMAGUCHI, Seiji MATSUKAWA, Shoji KURIBAYASHI, Takuya NIKI
- Journal Title
  
  Proc. ASPE 20th Annual Meeting
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360065
[Journal Article] Ultra-smoothness Grinding of a Glass with #140 Metal Bond Diamond Wheel2004
- Author(s)
  H.YASUI, T.SAWA
- Journal Title
  
  Proc.of 7^<th> International Conference on Progress of Machining Technology (ICPMT2004)
  
  Pages: 215-218
- NAID
  130004655560
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Influence of Grinding Fluid Supply on Ultra-Smoothness Grinding of Al_2O_3-TiC Ceramic2004
- Author(s)
  Heiji YASUI, Takekazu SAWA, Shigehiko SAKAMOTO
- Journal Title
  
  Proc.4th International Conference of the European society for precision engineering and nanotechnology
  
  Pages: 129-130
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] 粗粒ダイヤモンド砥石によるファインセラミックの超平滑研削-研削油剤の効果(続報)-2004
- Author(s)
  安井平司, 澤武一
- Journal Title
  
  精密工学会誌 Vol.70 No.6
  
  Pages: 848-852
- NAID
  110001824078
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Influence of Fluid Supply on Ultra-Smoothness Grinding of Silicon Nitride Ceramic with #140 Metal Bond Diamond Wheel2004
- Author(s)
  H.YASUI, T.SAWA Y.YAMAMOTO
- Journal Title
  
  Proc.of American Society for Precision Engineering (ASPE) 2004 Annual Meeting
  
  Pages: 566-569
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Ultra-Smoothness Grinding of Fine Ceramics by Coarse Grain Size Diamond Wheel-Effect of Grinding Fluid(Continued Report)-2004
- Author(s)
  H.YASUI, T.SAWA
- Journal Title
  
  J.Japan Soc.for Precision Engineering Vol.70 No.11
  
  Pages: 1423-1427
- NAID
  110001824078
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Ultra-smoothness Grinding of a Glass with #140 Metal Bond Diamond Wheel2004
- Author(s)
  Heiji YASUI, Takekazu SAWA
- Journal Title
  
  ICPMT2004
- NAID
  130004655560
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Influence of Fluid Supply on Ultra-Smoothness Grinding of Silicon Nitride Ceramic with #140 Metal Bond Diamond Wheel2004
- Author(s)
  Yasui, H., Sawa, T., Yamamoto, Y
- Journal Title
  
  Proc.ASPE 19th Annual Meeting
  
  Pages: 566-569
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Influence of Grinding Fluid Supply on Ultra-Smoothness Grinding of Al2O3-TiC Ceramic2004
- Author(s)
  H.YASUI, T.SAWA, S.SAKAMOTO
- Journal Title
  
  Proc.4th International Conference of the European society for precision engineering and nanotechnology
  
  Pages: 129-130
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Quantitative Investigation on Loading in CBN Wheel Life Using Automatic Image Processing System for Wheel Surface2004
- Author(s)
  Yasui, H., Kamiya T, Marumo, K
- Journal Title
  
  Proc.ASPE 19th Annual Meeting
  
  Pages: 562-565
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Ultra-Smoothness Grinding of Fine Ceramics by Coarse Grain Size Diamond Wheel-Effect of Grinding Fluid2004
- Author(s)
  H.YASUI, T.SAWA
- Journal Title
  
  J.Japan Soc.for Precision Engineering Vol.70 No.6
  
  Pages: 848-852
- NAID
  110001824012
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Influence of Fluid Supply on Ultra-Smoothness Grinding of Silicon Nitride Ceramic with #140 Metal Bond Diamond Wheel2004
- Author(s)
  H.YASUI, T.SAWA Y.YAMAMOTO
- Journal Title
  
  Proc.of American Society for Precision Engineering(ASPE) 2004 Annual Meeting
  
  Pages: 566-569
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Influence of Grinding Fluid Supply on Ultra-Smoothness Grinding of Al_2O_3-TiC Ceramic2004
- Author(s)
  H.YASUI, T.SAWA, S.SAKAMOTO
- Journal Title
  
  Proc.4th International Conference of the European society for precision engineering and nanotechnology
  
  Pages: 566-569
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] 粗粒ダイヤモンド砥石によるファインセラミックの超平滑研削-研削油剤の効果(続報)-2004
- Author(s)
  安井平司, 澤武一
- Journal Title
  
  精密工学会誌 Vol.70 No.11
  
  Pages: 1423-1427
- NAID
  110001824078
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Quantitative Investigation on Loading in CBN Wheel Life Using Automatic Image Processing System for Wheel Surface2004
- Author(s)
  H.YASUI, T.KAMIYA, K.MARUMO
- Journal Title
  
  Proc.of American Society for Precision Engineering (ASPE) 2004 Annual Meeting
  
  Pages: 562-565
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Quantitative Investigation on Loading in CBN Wheel Life Using Automatic Image Processing System for Wheel Surface2004
- Author(s)
  H.YASUI, T.KAMIYA, K.MARUMO
- Journal Title
  
  Proc.of American Society for Precision Engineering(ASPE) 2004 Annual Meeting
  
  Pages: 562-565
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Ultra-smoothness Grinding of a Glass with #140 Metal Bond Diamond Wheel2004
- Author(s)
  H.YASUI, T.SAWA
- Journal Title
  
  Proc.of 7^<th> International Conference on Progress of Machining Technology(ICPMT2004)
  
  Pages: 215-218
- NAID
  130004655560
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Effect of Grinding Fluid Supply on Ultra-Smoothness Grinding of Fine Ceramics2003
- Author(s)
  H.YASUI, T.SAWA
- Journal Title
  
  Proc.of American Society for Precision Engineering(ASPE) 2003 Annual Meeting
  
  Pages: 562-565
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Development of Polishingless Ultra-Smoothness Grinding Method (1st Report)-Theory and Some Experimental Investigations-2003
- Author(s)
  H.YASUI
- Journal Title
  
  J.Japan Soc.for Precision Engineering Vol.69,No.12
  
  Pages: 1713-1717
- NAID
  110001368383
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] 「研究成果報告書概要(和文)」より2003
- Author(s)
  H.YASUI, T.SAWA
- Journal Title
  
  Proc.of American Society for Precision Engineering (ASPE) 2003 Annual Meeting, pp-, 2004
  
  Pages: 562-565
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] Ductile-mode High Smoothness Grinding of Fine Ceramics by Diamond Wheel of Coarse Grain Size (2nd Report)-Influence of Wheel Speed on Ductile-mode Grinding of Fine Ceramics-2003
- Author(s)
  H.YASUI, I.MATSUNAGA, M.TSURUSAKI, S.SAKAMOTO
- Journal Title
  
  J.Japan Soc.for Precision Engineering Vol.69,No.11
  
  Pages: 1595-1599
- NAID
  110001368360
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] 研磨レス超平滑研削法の開発(第1報)-その考えと一,二の実験的検討-2003
- Author(s)
  安井平司
- Journal Title
  
  精密工学会誌 Vol.69 No.12
  
  Pages: 1713-1717
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072
[Journal Article] 粗粒ダイヤモンド砥石によるファインセラミックスの延性モード高平滑研削(第2報)-延性モード研削に及ぼす砥石周速度の影響-2003
- Author(s)
  安井平司, 松永郁夫, 鶴崎美智子, 坂本重彦
- Journal Title
  
  精密工学会誌 Vol.69 No.11
  
  Pages: 1595-1599
- NAID
  110001368360
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360072

1. SAKATA Masato (20040652)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
2. 原田ゆう子 (60274693)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. SAKAMOTO Shigehiko (00315285)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
4. 今井靖子 (10184805)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. SAEKI Morihiko (10284738)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

YASUI Heiji 安井 平司

安井 平司 ヤスイ ヘイジ

Research Projects

Research Products

Co-Researchers

切れ刃運動型超長寿命ナノメータ超精密切削加工技術の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of double side surface ultra-smoothness polishing technique by means of gearless workpiece rotation method based on new conceptPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Trial Manufacturing of Ultra-high Removal Nanometer-Smoothness Grinding Machine Based on New ConceptPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ultra-smoothness Grinding Mechanism of Fine Ceramics with Metal Bonded #140 Diamond WheelPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

HIGH REMOVAL ULTRA-SMOOTHNESS GRINDING OF VARIOUS KINDS OF FINE CERAMICS WITH #140-MESHMETAL BONDED DIAMOND WHEELPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Experimental Investigation of the Attainable Limiting Surface Roughness in the Ultra Precision Cutting of Various Kinds of MaterialsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

次世代用磁気ディスク基板のポリシング法の研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

次世代用磁気ディスク基板のポリシング法の研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

湿式研削における熱流入割合の解析Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

湿式研削における焼け発生予測の研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Investigation on Polisher Life in Ultra-high Pressure and Speed Polishing of Aluminum Type of Magnetic Disk Substrate ( 1^<st> Report )-In Case of Single Nap Layer Type of Polisher-2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] アルミ磁気ディスク基板の超高圧力・超高速度ポリシングにおけるポリシャ寿命の検討(第1報)- -層ナップ構造ポリシャの場合 -2007

Author(s)

Journal Title

Description

Data Source

[Journal Article] Polisher Life in Ultra-smoothness Polishing of Magnetic Disk Substrate Using New Double Side Surface Polishing Machine2006

Author(s)

Journal Title

Data Source

[Journal Article] Polisher Life in Ultra-smoothness Polishing of Magnetic Disk Substrate Using New Double Side Surface Polishing Machine2006

YASUI Heiji 安井平司

安井平司ヤスイヘイジ