matsumoto hiroaki 松本洋明

… Alternative Names

MATSUMOTO Hiroaki 松本洋明

Less

Researcher Number	40372312
Other IDs
Affiliation (Current)	2025: 香川大学, 創造工学部, 教授
Affiliation (based on the past Project Information) *help	2022 – 2024: 香川大学, 創造工学部, 教授 2018: 香川大学, 創造工学部, 教授 2013 – 2017: 香川大学, 工学部, 准教授 2010 – 2013: 東北大学, 金属材料研究所, 助教 2007 – 2008: 東北大学, 金属材料研究所, 助教 2005 – 2006: 東北大学, 金属材料研究所, 助手
Review Section/Research Field	Principal Investigator Transformative Research Areas, Section (II) / Material processing/Microstructural control engineering / Material processing/treatments Except Principal Investigator Structural/Functional materials / Material processing/treatments
Keywords	Principal Investigator チタン合金 / 組織制御 / 界面反応 / 結晶配向 / Al基セラミックス複合体 / 超塑性変形 / 超塑性 / マルテンサイト変態 / マルテンサイト / 温度場 … More / レーザ粉末床溶融結合 / 機械的特性 / 非平衡Al4SiC4 / 過昇温化 / アルミ基炭化ケイ素複合材料 / SiC/Al4SiC4相 / 温度勾配 / Al4SiC4相 / レーザ吸収率 / レーザ粉末床溶融結合法 / ヘテロ組織形成 / 高温塑性 / 準安定組織 / 不均質組織 / 応力緩和機構 / 準安定組織制御 / 不均質組織制御 / 構造・機能材料 / 超塑性成形 / 機械材料・材料力学 / 有限要素解析 / 準安定状態 / 動的再結晶 / 微細粒組織 / 変形機構 / 超微細粒組織 / 航空機チタン合金 / 室温延性 / 強度 / 熱間加工 / 低温熱処理 / 相分解 / 航空機Ti合金 … More Except Principal Investigator Co-Cr-Mo合金 / フェーズフィールド法 / 偏析 / フェーズフィールド法偏析 / 双晶 / 破壊 / マルテンサイト / 疲労 / 塑性変形 / 相変態 / 粒界 / 界面 / バイオマテリアル / 塑性加工 / 鍛造 / 組織制御 / 結晶 / 積層欠陥エネルギー / 動的再結晶 / 熱間鍛造 / 生体用合金 / コバルトクロム合金 / インテリジェント鍛造 / Processing map / 価電子制御 / 抗菌特性 / 超弾性 / 超親水性 / 可視光応答性 / 陽極酸化 / 抗菌 / 生体材料 / 二酸化チタン / 光触媒 Less

Creation of thermal field and crystallographic orientation controlling derived from metal/ceramic mixed powdersPrincipal Investigator
- Principal Investigator
  
  松本洋明
- Project Period (FY)
  2024 – 2025
- Research Category
  
  Grant-in-Aid for Transformative Research Areas (A)
- Review Section
  
  Transformative Research Areas, Section (II)
- Research Institution
  Kagawa University
Superheating and formation of SiC/Al4SiC4 phases originated from metal/ceramic mixed powdersPrincipal Investigator
- Principal Investigator
  
  松本洋明
- Project Period (FY)
  2022 – 2023
- Research Category
  
  Grant-in-Aid for Transformative Research Areas (A)
- Review Section
  
  Transformative Research Areas, Section (II)
- Research Institution
  Kagawa University
New type of guiding principle of heterogeneous microstructural control of aerospace Ti alloys for enhancing low-temperature-high-strain-rate-superplasticityPrincipal Investigator
- Principal Investigator
  
  Matsumoto Hiroaki
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kagawa University
New principle for low-temperature-high-strain-rate superplasticity in Titanium alloy by means of novel microstructural control techniquePrincipal Investigator
- Principal Investigator
  
  Hiroaki Matsumoto
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (A)
- Research Field
  
  Material processing/Microstructural control engineering
- Research Institution
  Kagawa University
Mechanism of epsilon-martensite formation at grain boundaries in biomedical cobalt alloy
- Principal Investigator
  
  KOIZUMI Yuichiro
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Intelligent forging and grain refinement
- Principal Investigator
  
  CHIBA Akihiko
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tohoku University
Examination of new type of grain-refinement process via martensitic microstructure-phase transformation in airplane Ti alloyPrincipal Investigator
- Principal Investigator
  
  MATSUMOTO Hiroaki
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Tohoku University
Study of superelastic biomaterials with antimicrobial activities
- Principal Investigator
  
  MASAHASHI Naoya
- Project Period (FY)
  2005 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University

All 2023 2022 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2006 Other

All Journal Article Presentation

[Journal Article] Effect of Laser Re-Melting Scan Strategy on Microstructure and Mechanical Properties of AlSi10Mg/SiC Composite Fabricated by Laser Powder Bed Fusion2023
- Author(s)
  宮内創，松本洋明，横田耕三
- Journal Title
  
  Journal of the Japan Institute of Metals and Materials
  
  Volume: 87 Issue: 12 Pages: 319-326
- DOI
  10.2320/jinstmet.J2023016
- ISSN
  0021-4876, 1880-6880, 2433-7501
- Year and Date
  2023-12-01
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Journal Article] Hierarchical Analysis of Phase Constituent and Mechanical Properties of AlSi10Mg/SiC Composite Produced by Laser-Based Powder Bed Fusion2023
- Author(s)
  Y. Yanase, H. Miyauchi, H. Matsumoto, K. Yokota
- Journal Title
  
  MATERIALS TRANSACTIONS
  
  Volume: 64 Issue: 6 Pages: 1125-1134
- DOI
  10.2320/matertrans.MT-ME2022003
- ISSN
  1345-9678, 1347-5320
- Year and Date
  2023-06-01
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Journal Article] High temperature tensile deformation mode and microstructural conversion of Ti-6Al-4V alloy with the (α+α′) duplex starting microstructure2019
- Author(s)
  Hiroaki Matsumoto, Hiromasa Ito
- Journal Title
  
  Materials Transactions
  
  Volume: 60
- NAID
  130007695383
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04537
[Journal Article] Superplasticity of metastable ultrafine-grained Ti-6242S alloy: mechanical flow behavior and microstructural evolution2019
- Author(s)
  Hiroyuki Imai, Gen Yamane, Hiroaki Matsumoto, Vanessa Vidal, Vincent Velay
- Journal Title
  
  Mater. Sci. Eng. A
  
  Volume: 754 Pages: 569-580
- DOI
  10.1016/j.msea.2019.03.085
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04537
[Journal Article] Mechanical Behavior of Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy under Hotand Superplastic Forming Conditions: Experiment and Modeling2018
- Author(s)
  G. Yamane，V. Velay, V. Vidal, H. Matsumoto
- Journal Title
  
  Defect and Diffusion Forum
  
  Volume: 385 Pages: 413-418
- DOI
  10.4028/www.scientific.net/ddf.385.413
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16H04537
[Journal Article] Superplastic property of the Ti-6Al-4V alloy with ultrafine-grained heterogeneous microstructure2017
- Author(s)
  H. Matsumoto, T. Nishihara, V. Velay, V. Vidal
- Journal Title
  
  Advanced Engineering Materials
  
  Volume: - Issue: 1
- DOI
  10.1002/adem.201700317
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-16H04537
[Journal Article] High temperature tensile deformation behavior of Ti-6Al-4V alloy with the acicular α’ martensite microstructure2016
- Author(s)
  T. Nishihara, H. Matsumoto, Y. Iwagaki, T. Shiraishi, Y. Ono
- Journal Title
  
  Mater. Sci. Forum
  
  Volume: 838-839 Pages: 243-248
- Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Journal Article] Superplasticity of the ultrafine-grained Ti-6Al-4V alloy with a metastable α-single phase microstructure2016
- Author(s)
  H. Matsumoto, V. Velay, A. Chiba
- Journal Title
  
  Proceedings of the 13th World Conference of Titanium, Sandiego
  
  Volume: -
- Acknowledgement Compliant / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Journal Article] Hot forming process analysis of Ti-6Al-4V alloy: experiment, behavior modeling and finite element simulation2016
- Author(s)
  V. Velay, H. Matsumoto, V. Vidal, L. Penazzi, F. Nazaret, Y. Marcel, M. Bouillane
- Journal Title
  
  Mater. Sci. Forum
  
  Volume: 838-839 Pages: 183-189
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Journal Article] Behavior modelling and microstructural evolutions of Ti-6Al-4V alloy under hot forming conditions2016
- Author(s)
  V. Velay, H. Matsumoto, V. Vidal, A. Chiba:
- Journal Title
  
  International Journal of Mechanical Science
  
  Volume: 108-109 Pages: 1-13
- DOI
  10.1016/j.ijmecsci.2016.01.024
- Peer Reviewed / Open Access / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Journal Article] Microstructural evolution and deformation mode under high-temperature-tensile-deformation of the Ti-6Al-4V alloy with the metastable α’ martensite starting microstructure2016
- Author(s)
  H. Matsumoto, T. Nishihara, Y. Iwagaki, T. Shiraishi, Y. Ono, A. Chiba
- Journal Title
  
  Mater. Sci. Eng., A
  
  Volume: 661 Pages: 68-78
- DOI
  10.1016/j.msea.2016.02.089
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-25709068
[Journal Article] Flow behavior and microstructure in Ti-6Al-4V alloy with an ultrafine-grained α-single phase microstructure during low-temperature-high-strain-rate superplasticity2014
- Author(s)
  Hiroaki Matsumoto,　Vincent Velay, Akihiko Chiba
- Journal Title
  
  Materials and Design
  
  Volume: 66 Pages: 611-617
- DOI
  10.1016/j.matdes.2014.05.045
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-25709068
[Journal Article] Microscopic mechanism of plastic deformation in a polycrystalline Co-Cr-Mo alloy with a single hcp phase2014
- Author(s)
  Hiroaki Matsumoto, Yuichiro Koizumi, Tetsuya Ohashi, Byong-Soo Lee, Yunping Li and Akihiko Chiba
- Journal Title
  
  Acta Materialia
  
  Volume: 64 Pages: 1-11
- DOI
  10.1016/j.actamat.2013.11.005
- Peer Reviewed
- Data Source
  KAKENHI-ORGANIZER-23109001, KAKENHI-PLANNED-23109009, KAKENHI-PROJECT-23360299
[Journal Article] Build-direction dependence of microstructure and high-temperature tensile property of Co-Cr-Mo alloy fabricated by electron-beam melting (EBM)2014
- Author(s)
  S.H. Sun, Y. Koizumi, S. Kurosu, Y. Li, H. Matsumoto, A. Chiba
- Journal Title
  
  Acta Materialia
  
  Volume: 64 Pages: 154-168
- DOI
  10.1016/j.actamat.2013.10.017
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360299
[Journal Article] Strain-induced martensitic transformation near twin boundaries in biomedical Co-Cr-Mo alloy with negative stacking fault energy2013
- Author(s)
  Yuichiro Koizumi
- Journal Title
  
  Acta Materialia
  
  Volume: 61 Issue: 5 Pages: 1648-1661
- DOI
  10.1016/j.actamat.2012.11.041
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360301, KAKENHI-PROJECT-23360299
[Journal Article] Enhancement of athermal α" martensitic transformation in Ti-10V-2Fe-3Al alloy due to high-speed hot deformation2012
- Author(s)
  T.Akanuma, H.Matsumoto, S.Sato, A.Chiba, I.Inagaki, Y.Shirai, T.Maeda
- Journal Title
  
  Scripta Materialia
  
  Volume: (未定)(Accepted in press) Issue: 1 Pages: 21-24
- DOI
  10.1016/j.scriptamat.2012.03.011
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760551
[Journal Article] Role of Nitrogen Addition in Stabilizing the γ Phase of Co-29Cr-6Mo Alloy2012
- Author(s)
  Y. Li, J.S. Yu, S. Kurosu, Y. Koizumi, H. Matsumoto, A. Chiba
- Journal Title
  
  Materials Chemistry and Physics
  
  Volume: 133 Issue: 1 Pages: 29-32
- DOI
  10.1016/j.matchemphys.2011.12.081
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360299
[Journal Article] Enhancement of athermal α”martensitic transformation in Ti-10V-2Fe-3Al alloy due to high-speed hot deformation2012
- Author(s)
  T.Akanuma, H.Matsumoto, S.Sato, A.Chiba, I.Inagaki, Y.Shirai, T.Maeda
- Journal Title
  
  Scripta Materialia
  
  Volume: 67 Pages: 21-24
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22760551
[Journal Article] Suzuki Segregation in Co-Ni-based Superalloy at 973 K : an experimental and computational study by phase-field simulation2012
- Author(s)
  Y. Koizumi, T. Nukaya, S. Suzuki, S. Kurosu, Y. Li, H. Matsumoto K. Sato, Yuji Tanaka, A. Chiba
- Journal Title
  
  Acta Materialia
  
  Volume: 60 Issue: 6-7 Pages: 2901-2915
- DOI
  10.1016/j.actamat.2012.01.054
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360299
[Journal Article] Strain-induced martensitic transformation near twin boundaries in biomedical Co-Cr-Mo alloy with negative stacking fault energy2012
- Author(s)
  Yuichiro Koizumi, Sho Suzuki, Kenta Yamanaka, Byoung-Soo Lee, Kazuhisa Sato, Yunping Li, Shingo Kurosu, Hiroaki Matsumoto, Akihiko Chiba
- Journal Title
  
  Acta Materialia
  
  Volume: Volume 60, Issues 6-7 Pages: 2901-2915
- URL
  http://dx.doi.org/10.1016/j.actamat.2012.11.041)
- Data Source
  KAKENHI-PROJECT-22360301
[Journal Article] "Enhancement of athermal α"martensitic transformation in Ti-10V-2Fe-3Al alloy due to high-speed hot deformation2012
- Author(s)
  T.Akanuma, H.Matsumoto, S.Sato, A.Chiba, I.Inagaki, Y.Shirai, T.Maeda
- Journal Title
  
  Scripta Mater
  
  Volume: 67 Pages: 21-24
- URL
  http://dx.doi.org/10.1016/j.scriptamat.2012.03.011
- Data Source
  KAKENHI-PROJECT-22760551
[Journal Article] Development of novel methods for compensation of stress-strain curves2011
- Author(s)
  Yunping Li, Emi Onodera, Hiroaki Matsumoto, Yuichiro Koizumi, Shu Yu, Akihiko Chiba
- Journal Title
  
  ISIJ International
  
  Volume: 51 Pages: 782-787
- NAID
  10030381018
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360301
[Journal Article] Composition dependence of Young's modulus in Ti-V, Ti-Nb, and Ti-V-Sn alloys2006
- Author(s)
  H. Matsumoto, S.Watanabe, N. Masahashi, and S. Hanada
- Journal Title
  
  Metallurgical and Materials Transactions A 37A
  
  Pages: 3239-3249
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17206070
[Presentation] レーザ粉末床溶融結合法で製造されたアルミニウム基セラミックス(SiC)複合体の組織と力学特性および母材が異なる影響2023
- Author(s)
  天野登太，宮内創，松本洋明，横田耕三
- Organizer
  第15回軽金属学会中国四国支部講演大会
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Presentation] LPBFにより製造されたAlSi10Mg-SiC複合体における多様な初期条件(プロセス・粉末)の緻密化・組織に及ぼす影響2023
- Author(s)
  松本洋明，宮内創，横田耕三
- Organizer
  日本金属学会　秋期講演大会
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Presentation] レーザ粉末床溶融結合法で製造されたアルミニウム基セラミックス(SiC)複合体の製造と特性2023
- Author(s)
  天野登太，宮内創，松本洋明，横田耕三
- Organizer
  日本鉄鋼協会・日本金属学会　中国四国支部　鉄鋼第66回・金属第63回　合同講演大会
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Presentation] レーザ粉末床溶融結合法により作製されたAlSi10Mg/SiC複合体の組織と機械的性質に及ぼすスキャンストラテジーの影響2022
- Author(s)
  宮内創、横田耕三、橋本大二郎、松本洋明
- Organizer
  軽金属学会　秋期講演大会(東京工業大学)
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Presentation] レーザ粉末床溶融結合法により製造されたAlSi10Mg/SiC複合体の緻密化・組織に及ぼすSiC量の影響2022
- Author(s)
  橋本大二郎、宮内創、松本洋明、横田耕三
- Organizer
  日本金属学会　第171回春期講演大会(福岡工業大学)
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Presentation] レーザ粉末床溶融結合法によるAlSi10Mg/SiC複合体の製造およびAl4SiC4の界面反応2022
- Author(s)
  松本洋明、柳瀬裕太、橋本大二郎、宮内創、横田耕三
- Organizer
  日本金属学会　第171回春期講演大会(福岡工業大学)
- Data Source
  KAKENHI-PUBLICLY-22H05290
[Presentation] 準安定組織・不均質(ヘテロ)微細組織制御した航空機チタン合金の高温塑性・超塑性特性2019
- Author(s)
  松本洋明
- Organizer
  日本金属学会春期講演大会　東京電機大学
- Invited
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] Mechanical Behavior of Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy under Hotand Superplastic Forming Conditions: Experiment and Modeling2018
- Author(s)
  G. Yamane,V.Velay,V.Vidal, H.Matsumoto
- Organizer
  ICSAM-201813th International Conference on Superplasticity in Advanced Materials (ICSAM 2018)，St. Petersburg, Russia
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] 超微細粒組織を有すTi-6Al-2Sn-4Zr-2Mo-0.1Si(Ti-6242S)合金の超塑性変形特性2018
- Author(s)
  松本洋明，今井浩之，Vincent Velay, Vanessa Vidal
- Organizer
  日本軽金属学会秋期講演大会　芝浦工業大学
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] 不均質組織形態を制御したUFG-Ti-6Al-4V合金の超塑性変形特性2018
- Author(s)
  伊藤大真，V. Velay, V. Vidal, 松本洋明
- Organizer
  日本金属学会秋期講演大会　東北大学
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] 準安定α′組織を有すTi-6Al-4V合金の高温引張変形特性2018
- Author(s)
  松本洋明，伊藤大真，今井浩之，西原卓郎
- Organizer
  日本金属学会　春期講演大会(千葉工業大学)
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] 種々の出発組織を有すTi-6242S合金の超塑性変形特性と塑性構成式の検討2017
- Author(s)
  今井浩之，Vincent Velay，松本洋明
- Organizer
  日本金属学会　秋期講演大会(北海道大学)
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] 超微細不均質組織を呈すTi-6Al-4V合金の超塑性変形特性2017
- Author(s)
  松本洋明，西原卓郎，Vincent Velay
- Organizer
  日本軽金属学会　秋期講演大会(宇都宮大学)
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] (α+α’)duplex組織を出発組織としたTi-6Al-4V合金の高温変形特性2017
- Author(s)
  伊藤大真，Vincent Velay, 松本洋明
- Organizer
  日本金属学会　秋期講演大会(北海道大学)
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] High Temperature Deformation Behavior of Ti-6Al-4V Alloy with Metastable Microstructure2017
- Author(s)
  Hiroaki Matsumoto, Hiromasa Ito, Takuro Nishihara
- Organizer
  International conference on Frontiers in Materials Processing, Applications, Research & Technology (FiMPART’17), Bordeaux, France.
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] 不均質な微細組織形態を有すTi-6Al-4V合金の超塑性変形特性2016
- Author(s)
  西原卓郎，Vincent Velay, 松本洋明
- Organizer
  日本金属学会　秋期講演大会(大阪大学)
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] Ti-6Al-2Sn-4Zr-2Mo-0.1Si合金の微細粒域での高温変形特性に及ぼす粒径の影響2016
- Author(s)
  今井浩之，Vincent Velay，松本洋明
- Organizer
  日本金属学会　秋期講演大会(大阪大学)
- Place of Presentation
  大阪大学
- Year and Date
  2016-09-21
- Data Source
  KAKENHI-PROJECT-16H04537
[Presentation] High temperature tensile deformation behavior of Ti-6Al-4V alloy with the acicular α’ martensite microstructure2015
- Author(s)
  T. Nishihara, H. Matsumoto, Y. Iwagaki, T. Shiraishi, Y. Ono
- Organizer
  12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015
- Place of Presentation
  東京大学
- Year and Date
  2015-09-07
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Ti-6Al-4V合金のα’マルテンサイトを出発組織とした高温引張特性と組織2015
- Author(s)
  西原卓郎，松本洋明，千葉晶彦，岩垣洋平，白石透，小野芳樹
- Organizer
  日本金属学会　秋期講演大会　(2015)
- Place of Presentation
  九州大学　伊都キャンパス
- Year and Date
  2015-09-16
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Ti-6Al-4V合金の(α+β)域鍛造における組織形成予測2015
- Author(s)
  松本洋明，千葉晶彦
- Organizer
  軽金属学会　秋期講演大会(2015)
- Place of Presentation
  日本大学工学部(津田沼)
- Year and Date
  2015-11-21
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Superplasticity of ultrafine-grained Ti-6Al-4V alloy with a metastable α-single phase2015
- Author(s)
  Hiriaki Matsumoto, Vincent Velay, Akihiko Chiba
- Organizer
  13th World Conference of Titanium, Sandiego（USA)
- Place of Presentation
  Sandiego（USA)
- Year and Date
  2015-08-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Superplastic deformation mode of Ti-6Al-4V alloy with an ultrafine-grained α-single phase microstructure under the low-temperature- high-strain-rate2015
- Author(s)
  Hiroaki Matsumoto, Vincent Velay, Akihiko Chiba, Yohei Iwagaki. Tohru Shiraishi, Yoshiki Ono
- Organizer
  12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015
- Place of Presentation
  東京大学
- Year and Date
  2015-09-07
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Hot forming process analysis of Ti-6Al-4V alloy: experiment, behavior modeling and finite element simulation2015
- Author(s)
  V. Velay, H. Matsumoto, V. Vidal, L. Penazzi, F. Nazaret, Y. Marcel, M. Bouillane
- Organizer
  12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015
- Place of Presentation
  東京大学
- Year and Date
  2015-09-07
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] 準安定α単相の超微細粒組織を有する航空機用Ti-6Al-4V合金の超塑性特性2014
- Author(s)
  松本洋明
- Organizer
  2014日本金属学会　春期講演大会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Co-29Cr-6Mo合金の疲労変形におけるひずみ誘起マルテンサイト変態と突出し･入込み形成機構2014
- Author(s)
  光延卓哉, 小泉雄一郎, 李云平, 松本洋明, 山中謙太, 千葉晶彦
- Organizer
  日本金属学会春期 (第154回) 講演大会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Co-29Cr-6Mo合金の疲労変形におけるひずみ誘起マルテンサイト変態と突出し・入込み形成機構2014
- Author(s)
  光延卓哉, 小泉雄一郎, 李云平, 松本洋明, 山中謙太, 千葉晶彦
- Organizer
  日本金属学会春期(第154回) 講演大会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 微細粒組織を有するTi-6Al-4V合金の強化因子2014
- Author(s)
  松本洋明
- Organizer
  2014日本金属学会　春期講演大会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] 生体用 ε-CoCrMo合金における変形過程の粒界近傍での転位集積と結晶塑性解析2013
- Author(s)
  松本洋明, 小泉雄一郎, 李秉洙, 李云平, 大橋鉄也, 千葉晶彦
- Organizer
  日本金属学会2013年度春期講演大会
- Place of Presentation
  東京
- Year and Date
  2013-03-27
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Effect of preferential orientation on creep behavior of Co-28Cr-6Mo-0.23C-0.17N alloy fabricated by electron beam melting (EBM)2013
- Author(s)
  S.H. Sun, S. Kurosu, Y. Koizumi, Y. Li, H. Matsumoto, A. Chiba
- Organizer
  日本金属学会2013年度春期講演大会
- Place of Presentation
  東京
- Year and Date
  2013-03-27
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 生体用ε-CoCrMo合金における変形過程の粒界近傍での転位集積と結晶塑性解析2013
- Author(s)
  松本洋明
- Organizer
  日本金属学会　２０１３年春期講演大会
- Place of Presentation
  東京理科大学
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] 生体用ε-CoCrMo?合金における変形過程の粒界近傍での転位集積と結晶塑性解析2013
- Author(s)
  松本洋明, 小泉雄一郎, 李秉洙, 李云平, 大橋鉄也, 千葉晶彦
- Organizer
  日本金属学会2013年度春期講演大会
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Phase-Field Simulation of Segregation to Stacking Fault and Twin Boundaries in Co-based alloys2012
- Author(s)
  Y.Koizumi, S.Suzuki, T.Ohtomo, S.Kurosu, Y.Li, H.Matsumoto, A.Chiba
- Organizer
  Symposium : Computational Thermodynamics and Kinetics in TMS/AIME Annual Meeting
- Place of Presentation
  Orlando, FL, USA(招待講演)
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Ultrafine Grain Refinement due to Novel Dynamic Recrystallization Mechanisms in Co-29Cr-6Mo Alloy with Extremely Low Stacking Fault Energy at Elevated Temperatures2012
- Author(s)
  A. Chiba, K.Yamanaka, Y. Li, Y. Koizumi, H. Matsumoto
- Organizer
  The 5th International Symposium on Designing, Processing and Properties of Advanced, Engineering Materials (ISAEM-2012)
- Place of Presentation
  豊橋
- Year and Date
  2012-11-05
- Invited
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 航空機用Ti-5Al-5Mo-5V-3Cr合金の高温変形挙動と組織変化2012
- Author(s)
  赤沼俊之、松本洋明、千葉晶彦、稲垣育宏、白井義久、前田尚志
- Organizer
  2012年春期(第150回)日本金属学会講演会
- Place of Presentation
  会場:横浜国立大学常盤台キャンパス
- Year and Date
  2012-03-29
- Data Source
  KAKENHI-PROJECT-22760551
[Presentation] 生体用コバルトクロム合金の高強度・高延性化のための材料加工技術2012
- Author(s)
  千葉晶彦, 山中謙太, 黒須信吾, 李云平, 小泉雄一郎, 松本洋明
- Organizer
  東北大学金属材料研究所共同研究ワークショップ, 日本バイオマテリアル学会東北地域講演会
- Place of Presentation
  仙台
- Year and Date
  2012-09-03
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] GND Distribution near Strain-induced Martensitic ε-phase in Co-Cr-Mo-N alloy2012
- Author(s)
  李秉洙, 鈴木将, 松本洋明, 李云平, 小泉雄一郎, 千葉晶彦
- Organizer
  日本金属学会春期講演大会
- Place of Presentation
  横浜国立大学(招待講演)
- Year and Date
  2012-03-30
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Micromechanical Analysis of Strain-Induced Martensitic Transformation in Biomedical Co-Cr-Mo-N Alloy2012
- Author(s)
  B.S. Lee, Sho Suzuki, H. Matsumoto, Y. Koizumi, A. Chiba
- Organizer
  Biological Materials Science Symposium in TMS/AIME Annual Meeting
- Place of Presentation
  Orlando, FL, USA
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 生体用Co-Cr合金の組織制御と力学特性改善2012
- Author(s)
  千葉晶彦、山中謙太、黒須信吾、小泉雄一郎、李云平、松本洋明
- Organizer
  日本金属学会2012年秋期講演(第151回)
- Place of Presentation
  松山
- Year and Date
  2012-09-18
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] 生体用 Co-Cr-Mo 合金中の粒界近傍におけるひずみ誘起マルテンサイト2012
- Author(s)
  小泉雄一郎, 光延卓也, 李秉洙, 松本洋明, 李云平, 黒須信吾, 千葉晶彦
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] ε単相組織の生体用 Co-Cr-Mo 多結晶合金の強度および変形特性2012
- Author(s)
  松本洋明, 黒須信吾, 李秉洙, 李云平, 小泉雄一郎, 千葉晶彦
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Tribology of Artificial Hip Joints Made of Co-Cr-Mo Alloys2012
- Author(s)
  陳妍、黒須信吾、李云平、松本洋明、小泉雄一郎、千葉晶彦
- Organizer
  日本金属学会2012年秋期講演(第151回)
- Place of Presentation
  松山
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] 生体用Co-Cr-Mo 合金中の粒界近傍におけるひずみ誘起マルテンサイト2012
- Author(s)
  小泉雄一郎, 光延卓也, 李秉洙, 松本洋明, 李云平, 黒須信吾, 千葉晶彦
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 塑性変形した生体用 Co-Cr-Mo 合金における種々の界面近傍のひずみ分布2012
- Author(s)
  鈴木将, 小泉雄一郎, 李秉洙, 山中謙太, 松本洋明, 李云平, 黒須信吾, 菅原孝昌, 田中裕次, 千葉晶彦
- Organizer
  日本金属学会春期講演大会
- Place of Presentation
  横浜国立大学
- Year and Date
  2012-03-30
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 生体用 Co-Cr 合金の組織制御と力学特性改善2012
- Author(s)
  千葉晶彦, 山中謙太, 黒信吾, 小泉雄一郎, 李云平, 松本洋明
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛
- Year and Date
  2012-09-17
- Invited
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] GND Distribution near Strain-induced Martensitic ε-phase in Co-Cr-Mo-N alloy2012
- Author(s)
  李秉洙, 鈴木将, 松本洋明, 李云平, 小泉雄一郎, 千葉晶彦
- Organizer
  日本金属学会春期講演大会
- Place of Presentation
  横浜国立大学
- Year and Date
  2012-03-30
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] ε単相組織の生体用Co-Cr-Mo多結晶合金の強度および変形特性2012
- Author(s)
  松本洋明, 黒須信吾, 李秉洙 (D3), 李云平, 小泉雄一郎, 千葉晶彦
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Micromechanical Analysis of Strain-Induced Martensitic Transformation in Biomedical Co-Cr-Mo-N Alloy2012
- Author(s)
  B-S Lee, S.Suzuki, H.Matsumoto, Y.Koizumi, A.Chiba
- Organizer
  Biological Materials Science Symposium in TMS/AIME Annual Meeting
- Place of Presentation
  Orlando, FL, USA(招待講演)
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Phase-Field Simulation of Segregation to Stacking Fault and Twin Boundaries in Co-based alloys2012
- Author(s)
  Y. Koizumi, S. Suzuki, T. Ohtomo, S.Kurosu, Y. Li, H. Matsumoto, A. Chiba
- Organizer
  Symposium : Computational Thermodynamics and Kinetics in TMS/AIME Annual Meeting
- Place of Presentation
  Orlando, FL, USA
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Microstructure-Dependence of Strain-Induced Martensitic Transformation in Biomedical Co-Cr-Mo-N Alloy2012
- Author(s)
  李乗洙, 松本洋明, 小泉雄一郎, 千葉晶彦
- Organizer
  日本金属学会秋期講演大会
- Place of Presentation
  愛媛
- Year and Date
  2012-09-17
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 塑性変形した生体用Co-Cr-Mo合金における種々の界面近傍のひずみ分布2012
- Author(s)
  鈴木将, 小泉雄一郎, 李秉洙, 山中謙太, 松本洋明, 李云平, 黒須信吾, 菅原孝昌, 田中裕次, 千葉晶彦
- Organizer
  日本金属学会春期講演大会
- Place of Presentation
  横浜国立大学(招待講演)
- Year and Date
  2012-03-30
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Ultrafine Grain Refinement due to Novel Dynamic Recrystallization Mechanisms in Co-29Cr-6Mo Alloy with Extremely Low Stacking Fault Energy at Elevated Temperatures2012
- Author(s)
  A. Chiba, K. Yamanaka, Y. Li, Y. Koizumi, H. Matsumoto
- Organizer
  The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials (ISAEM-2012) [Invited]
- Place of Presentation
  豊橋
- Invited
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] Wear Behavior of Metal-on-Metal Hip Joints With Different Clearances by Using an ISO Hip Joint Simulator and Evaluation of the Optimal Clearance2012
- Author(s)
  Y. Chen, S. Kurosu, Y. Li, H. Matsumoto, Y. Koizumi, A. Chiba
- Organizer
  International Society for Technology in Arthroplasty 25th Annual Congress
- Place of Presentation
  Sydney, Australia
- Data Source
  KAKENHI-PROJECT-23360299
[Presentation] 生体用Co-Cr-Mo合金の塑性変形における双晶界面近傍での残留ひずみ変化2011
- Author(s)
  李云平、松本洋明、小泉雄一郎、千葉晶彦
- Organizer
  日本金属学会2011年秋期講演(第149回)
- Place of Presentation
  沖縄
- Year and Date
  2011-11-07
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] 生体用コバルトクロム合金の熱間圧延組織とその力学特性2011
- Author(s)
  千葉晶彦、山中謙太、李云平、黒須信吾、松本洋明、小泉雄一郎、森真奈美
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋
- Year and Date
  2011-11-28
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] H.C.P.構造を有する生体用Co合金およびα'組織を有するTi合金の塑性変形機構2011
- Author(s)
  松本洋明、黒須信吾、李秉洙、李云平、小泉雄一郎、千葉晶彦
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋
- Year and Date
  2011-11-28
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] 生体用Co-29Cr-6Mo-0.16合金の熱間鍛造過程における動的再結晶挙動2011
- Author(s)
  李云平、松本洋明、小泉雄一郎、千葉晶彦
- Organizer
  第62回塑性加工連合講演会
- Place of Presentation
  豊橋
- Year and Date
  2011-11-28
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] ε-hcp単相組織を有する生体用Co-Cr-Mo多結晶合金の変形機構2010
- Author(s)
  松本洋明、千葉晶彦, 他
- Organizer
  日本金属学会2010年秋期(第147回)
- Place of Presentation
  北海道大学
- Year and Date
  2010-09-25
- Data Source
  KAKENHI-PROJECT-22360301
[Presentation] 微細粒組織を有するTi-6Al-4V合金の超塑性変形の流動特性
- Author(s)
  松本洋明、千葉晶彦、Vincent Velay
- Organizer
  日本鉄鋼協会　秋期講演大会
- Place of Presentation
  名古屋大学
- Year and Date
  2014-09-24 – 2014-09-26
- Data Source
  KAKENHI-PROJECT-25709068
[Presentation] Ti-10V-2Fe-3Al合金の熱間加工後の微細組織形成とマルテンサイト変態
- Author(s)
  赤沼俊之、松本洋明、李云平、千葉晶彦、稲垣育宏、白井善久、前田尚志
- Organizer
  2011春期日本金属学会講演会(講演会は東日本震災で中止、概要は発刊)
- Data Source
  KAKENHI-PROJECT-22760551
[Presentation] Ti-6Al-4V合金の(α＋β)域鍛造における組織形成予測
- Author(s)
  松本洋明、李云平、山中謙太、小泉雄一郎、千葉晶彦
- Organizer
  日本鉄鋼協会　春期講演大会
- Place of Presentation
  東京大学
- Year and Date
  2015-03-18 – 2015-03-20
- Data Source
  KAKENHI-PROJECT-25709068

1. CHIBA Akihiko (00197617)

# of Collaborated Projects: 2 results

# of Collaborated Products: 35 results
2. LI Yunping (80546862)

# of Collaborated Projects: 2 results

# of Collaborated Products: 32 results
3. KOIZUMI Yuichiro (10322174)

# of Collaborated Projects: 2 results

# of Collaborated Products: 35 results
4. MASAHASHI Naoya (20312639)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
5. OKU Masayoshi (90005968)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. HANADA Shuji (10005960)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
7. SEMBOSHI Satoshi (00364026)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. MIZUKOSHI Yoshiteru (60342523)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. OHTSU Naofumi (10400409)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. 本間智之 (50452082)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. VELAY Vincent

# of Collaborated Projects: 1 results

# of Collaborated Products: 11 results
12. 大橋鉄也

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

matsumoto hiroaki 松本 洋明

MATSUMOTO Hiroaki 松本 洋明

Research Projects

Research Products

Co-Researchers

Creation of thermal field and crystallographic orientation controlling derived from metal/ceramic mixed powdersPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Superheating and formation of SiC/Al4SiC4 phases originated from metal/ceramic mixed powdersPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

New type of guiding principle of heterogeneous microstructural control of aerospace Ti alloys for enhancing low-temperature-high-strain-rate-superplasticityPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

New principle for low-temperature-high-strain-rate superplasticity in Titanium alloy by means of novel microstructural control techniquePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Mechanism of epsilon-martensite formation at grain boundaries in biomedical cobalt alloy

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Intelligent forging and grain refinement

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Examination of new type of grain-refinement process via martensitic microstructure-phase transformation in airplane Ti alloyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study of superelastic biomaterials with antimicrobial activities

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Effect of Laser Re-Melting Scan Strategy on Microstructure and Mechanical Properties of AlSi10Mg/SiC Composite Fabricated by Laser Powder Bed Fusion2023

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] Hierarchical Analysis of Phase Constituent and Mechanical Properties of AlSi10Mg/SiC Composite Produced by Laser-Based Powder Bed Fusion2023

Author(s)

Journal Title

DOI

ISSN

Year and Date

Language

Data Source

[Journal Article] High temperature tensile deformation mode and microstructural conversion of Ti-6Al-4V alloy with the (α+α′) duplex starting microstructure2019

Author(s)

Journal Title

NAID

Data Source

[Journal Article] Superplasticity of metastable ultrafine-grained Ti-6242S alloy: mechanical flow behavior and microstructural evolution2019

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Mechanical Behavior of Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy under Hotand Superplastic Forming Conditions: Experiment and Modeling2018

matsumoto hiroaki 松本洋明

MATSUMOTO Hiroaki 松本洋明