YAMAMOTO Takeyuki 山本武幸

Researcher Number	40396594
Affiliation (Current)	2025: 茨城大学, 工学部技術部, 技術主幹 2025: 茨城大学, 応用理工学野, 技術職員
Affiliation (based on the past Project Information) *help	2024: 茨城大学, 工学部技術部, 技術主幹 2018 – 2023: 茨城大学, 理工学研究科(工学野), 技術職員 2008 – 2017: 茨城大学, 工学部, 技術職員 2013: 茨城大学, 工学部, 技術専門職員 2008 – 2009: 茨城大学, 工学部, 技術専門職員
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related Except Principal Investigator Production engineering/Processing studies / Design engineering/Machine functional elements/Tribology / Basic Section 18020:Manufacturing and production engineering-related / Basic Section 18040:Machine elements and tribology-related
Keywords	Principal Investigator 切削 / 摩耗 / 潤滑 / なじみ / 境界潤滑 / 摩擦 / 振動援用切削 / きさげ / 表面テクスチャ / トライボロジー … More / トライボロジ― / 硬質皮膜 / 付加加工 / 放電加工 / 材料加工・処理 / 機械工作・生産工学 / テクスチャ / ダイヤモンド工具 / レーザ加工 / ナノマイクロ加工 / 色素増感太陽電池 / 転写 / 透明電極 / 振動 / 表面微細構造 … More Except Principal Investigator 加工変質層 / 半導体ウエハ / 研削加工 / 引っかき / 陽極酸化 / 掘起し / トライボロジー / CMG / 結晶構造 / 研削面 / 無機材料 / 顕微Raman断層イメージング計測 / 加工損傷 / 断層計測 / Ramanイメージング / 超解像 / 非破壊計測 / 断層イメージング / 顕微Raman分光 / スクラッチ / 環境 / 接触試験 / 摩擦 / 原子間ポテンシャル / 分子動力学 / シリコンウェハ / 極薄ウェハ / 白色光反射分光計測 / 低コヒーレント干渉 / 近赤外分光 / 表面性状 / 分光イメージング / 測定精度 / 干渉 / 分光 / 干渉計 / 画像計測 / 厚さ計測 / ウェハ薄片化 / 表面粗さ / サファイヤ単結晶 / Defect free / ハイブリッド送り機構 / サファイア単結晶 / 加工変質法 / ハイブリッド化工法 / ハイブリッド加工法 / サファイ / 切削・研削加 / ハイブリッド加工 / サファイア / 切削・研削加工 / 工具 / バリ / 静水圧 / 計算物理 / 切削 / 機械工作・生産工学 / 分子動力学シミュレーション / インデンテーション実験 / "軟脆"材料 / "硬脆"材料 / 物理特性 / 機械特性 / “硬脆”材料 / “軟脆”材料 / 研削熱の影響 / 圧電効果 / 焦電効果 / 機械化学融合加工 / 単結晶 / 硬脆材料 / 軟脆材料 / 振動 / 酸化チタン / 光触媒 / ナノパターン / 電極 / 平坦度 / 分散補償器 / 化学・機械融合加工 / 極薄ウエハ / 単結晶シリコン / エタロン / キーワード Less

超解像Raman断層計測を用いた結晶損傷発生機構の解明と先端加工技術への応用
- Principal Investigator
  
  小貫哲平
- Project Period (FY)
  2021 – 2024
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Ibaraki University
Overcoming weaknesses and elucidating tribological phenomena by a new trial of molecular dynamics analysis considering experimental results
- Principal Investigator
  
  Shimizu Jun
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18040:Machine elements and tribology-related
- Research Institution
  Ibaraki University
Examination of replaceability of scraping with texturing by micro-vibration assisted cuttingPrincipal Investigator
- Principal Investigator
  
  Takeyuki Yamamoto
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Ibaraki University
Development of hard film texture coated tool by scanning micro discharge additional processing in gas atmospherePrincipal Investigator
- Principal Investigator
  
  Takeyuki Yamamoto
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
Development of a novel high-integrity cutting method by use of localized materials hardening due to tribo-compressive hydrostatic stress
- Principal Investigator
  
  Shimizu Jun
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Ibaraki University
Development of mechanical + chemical hybrid manufacturing technology of sapphire crystal wafer
- Principal Investigator
  
  ZHOU LIBO
- Project Period (FY)
  2015 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
Life elongation by texturing and edge formation of monocrystalline diamond tool using ps pulse laserPrincipal Investigator
- Principal Investigator
  
  Yamamoto Takeyuki
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
On machine wide area thickness measurement technology for wafer thinning process development
- Principal Investigator
  
  Onuki Teppei
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Young Scientists (A)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
Study on the characterization and grinding technology of "soft-brittle" functional materials
- Principal Investigator
  
  ZHOU Libo
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
Application of micro-transcription by using nano-cutting mold to development of high-functional dye-sensitized solar cellPrincipal Investigator
- Principal Investigator
  
  YAMAMOTO Takeyuki
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University
Development of high-functional photocatalytic film using nano/micro double ploughing texture
- Principal Investigator
  
  SHIMIZU Jun
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Ibaraki University
掘起し現象のMEMS利用に関する研究
- Principal Investigator
  
  清水淳
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Design engineering/Machine functional elements/Tribology
- Research Institution
  Ibaraki University
Research on Manufacturing Technology of Etalon : A Core Element of Tunable Dispersion Compensator for Optical Communication, by means of CMG Process
- Principal Investigator
  
  ZHOU Libo
- Project Period (FY)
  2007 – 2009
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Ibaraki University

[Journal Article] 振動援用切削でテクスチャ加工した圧痕状パターン周期配置型金属面の乾式すべり特性2023
- Author(s)
  清水　淳，山本武幸，金子和暉，周　立波，小貫哲平，尾嶌裕隆
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 67 Pages: 218-223
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20K04235
[Journal Article] Friction Characteristics of Mechanically Microtextured Metal Surface in Dry Sliding2020
- Author(s)
  Jun Shimizu, Tomotaka Nakayama, Kouta Watanabe, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima, Libo Zhou
- Journal Title
  
  Tribology International
  
  Volume: 149 Pages: 105634-105634
- DOI
  10.1016/j.triboint.2019.02.042
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K04102, KAKENHI-PROJECT-20K04235
[Journal Article] Study on mechanism of rotary in-feed face grinding2019
- Author(s)
  石橋憲，月井裕太，蛯名雄太郎，周立波，清水淳，小貫哲平，山本武幸, 尾嶌裕隆
- Journal Title
  
  Journal of the Japan Society for Abrasive Technology
  
  Volume: 63 Issue: 1 Pages: 31-35
- DOI
  10.11420/jsat.63.31
- NAID
  130007670937
- ISSN
  0914-2703, 1880-7534
- Year and Date
  2019-01-01
- Language
  Japanese
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H02213
[Journal Article] Friction Characteristics of Mechanically Microtextured Metal Surface in Dry Sliding2019
- Author(s)
  Jun Shimizu, Tomotaka Nakayama, Kouta Watanabe, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima, Libo Zhou
- Journal Title
  
  Tribology International
  
  Volume: 印刷中
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K06000
[Journal Article] Study on the finishing capability and abrasives-sapphire interaction in dry chemo-mechanical-grinding (CMG) process2018
- Author(s)
  Wu Ke、Zhou Libo、Onuki Teppei、Shimizu Jun、Yamamoto Takeyuki、Yuan Julong
- Journal Title
  
  Precision Engineering
  
  Volume: 52 Pages: 451-457
- DOI
  10.1016/j.precisioneng.2018.02.007
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-15H02213
[Journal Article] Study on the potential of chemo-mechanical-grinding (CMG) process of sapphire wafer2017
- Author(s)
  Ke Wu, Libo Zhou, Jun Shimizu, Teppei Onuki, Takeyuki Yamamoto, Hirotaka Ojima and Julong Yuan
- Journal Title
  
  The International Journal of Advanced Manufacturing Technology
  
  Volume: 90 Issue: 5-8 Pages: 1-8
- DOI
  10.1007/s00170-016-9836-1
- Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213, KAKENHI-PROJECT-15K13840
[Journal Article] Molecular Dynamics Simulation of a Cutting Method by Making Use of Localized Hydrostatic Pressure2016
- Author(s)
  Jun Shimizu, Keito Uezaki, Libo Zhou, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima
- Journal Title
  
  Advanced Materials Research
  
  Volume: 1136 Pages: 156-161
- DOI
  10.4028/www.scientific.net/amr.1136.156
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05753, KAKENHI-PROJECT-25420043
[Journal Article] Development of Microtextured Titanium Dioxide Surface by using Microcutting Techniques2016
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Journal Title
  
  Ceramics Transactions
  
  Volume: 257 Pages: 35-42
- DOI
  10.1002/9781119234463.ch4
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15K05753, KAKENHI-PROJECT-16K06000
[Journal Article] Molecular Dynamics Simulation of a Cutting Method by Making Use of Localized Hydrostatic Pressure2015
- Author(s)
  Jun Shimizu, Keito Uezaki, Libo Zhou, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima
- Journal Title
  
  Applied Mechanics and Materials
  
  Volume: 1136 Pages: 156-161
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-15H02213
[Journal Article] Development of Microtextured Photocatalytic Surface by Vibration-assisted Scratching2014
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Journal Title
  
  Materials Science Forum
  
  Volume: 783-786 Pages: 1488-1493
- DOI
  10.4028/www.scientific.net/msf.783-786.1488
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25420043
[Journal Article] 日本縦断研究室巡り「茨城大学　Nano-Engineering Laboratory (nLab)」2014
- Author(s)
  周　立波，清水　淳，小貫哲平，尾嶌裕隆，山本武幸
- Journal Title
  
  レーザ協会誌
  
  Volume: 39 Pages: 33-35
- Data Source
  KAKENHI-PROJECT-25420043
[Journal Article] Molecular Dynamics Simulation of Energy Dissipation Process in Atomic-Scale Stick-Slip Phenomenon2013
- Author(s)
  Jun Shimizu, Libo Zhou and Takeyuki Yamamoto
- Journal Title
  
  Tribology Online
  
  Volume: 8 Pages: 38-43
- NAID
  130003368294
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360062
[Journal Article] Study on the Mechanical Properties of Lithium Tantalate and the Influence on Its Machinability2013
- Author(s)
  Wei Hang, Libo Zhou, Jun Shimizu, Julong Yuan, Takeyuki Yamamoto
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 7 Pages: 644-653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420043
[Journal Article] Mold Pattern Fabrication by Nanoscratching2013
- Author(s)
  Jun Shimizu, Libo Zhou, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Han Huang
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: 7 Pages: 686-693
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420043
[Journal Article] Fabrication of Surface Microtexture by Vibration Assisted Cutting2013
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Hirotaka Ojima, Teppei Onuki, Shun-ichi Nagaoka
- Journal Title
  
  Advanced Materials Research
  
  Volume: 797 Pages: 638-641
- DOI
  10.4028/www.scientific.net/amr.797.638
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420043
[Journal Article] Study on the mechanical properties of lithium tantalate and the influence on its machinability2013
- Author(s)
  Wei Hang, Libo Zhou, Jun Shimizu, Julong Yuan and Takeyuki Yamamoto
- Journal Title
  
  Int. J. of Automation Technology
  
  Volume: Vol.7, 6 Pages: 644-653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360062
[Journal Article] Molecular Dynamics Simulation of Energy Dissipation Process in Atomic-Scale Stick-Slip Phenomenon2013
- Author(s)
  J. Shimizu, L. Zhou, T. Yamamoto
- Journal Title
  
  Tribology Online
  
  Volume: 8 Issue: 1 Pages: 38-43
- DOI
  10.2474/trol.8.38
- NAID
  130003368294
- ISSN
  1881-218X, 1881-2198
- Language
  English
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102, KAKENHI-PROJECT-22560134
[Journal Article] Study on the mechanical properties of lithium tantalate and the influence on its machinability2013
- Author(s)
  Wei Hang, Libo Zhou, Jun Shimizu, Julong Yuan and Takeyuki Yamamoto
- Journal Title
  
  International Journal of Automation Technology
  
  Volume: Vol. 7, No. 6 Pages: 644-653
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360062
[Journal Article] Study on micro/nano-indentation of typical soft-brittle materials2012
- Author(s)
  W. Hang, L. Zhou, J. Shimizu, T. Yamamoto, J. Yuan
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vols.523-524 Pages: 7-12
- DOI
  10.4028/www.scientific.net/kem.523-524.7
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102, KAKENHI-PROJECT-22560134, KAKENHI-PROJECT-23360062
[Journal Article] Siウエハ仕上げ加工に及ぼす加工変質層の影響の解析2012
- Author(s)
  清水淳,周立波,小貫哲平,尾嶌裕隆,山本武幸,鈴木直紀
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 55巻 Pages: 662-667
- URL
  https://www.jstage.jst.go.jp/article/jsat/55/11/55_662/_pdf
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560134
[Journal Article] Influence of Surface Micro Texture on Photocatalitic Function of Titanium Dioxide Film2012
- Author(s)
  J. Shimizu, G. Kobayashi, N. Hasegawa, T. Yamamoto, H. Ojima, T. Onuki, L. Zhou
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.706-709 Pages: 2646-2651
- DOI
  10.4028/www.scientific.net/msf.706-709.2646
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102, KAKENHI-PROJECT-22560134, KAKENHI-PROJECT-23360062
[Journal Article] Study on micro/nano-indentation of typical soft-brittle materials2012
- Author(s)
  Wei Hang, Libo Zhou, Jun Shimizu, Takeyuki Yamamoto and Julong Yuan
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vol. 523-524
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360062
[Journal Article] Siウエハ仕上げ加工に及ぼす加工変質層の影響の解析2011
- Author(s)
  清水淳, 周立波, 小貫哲平, 尾嶌裕隆, 山本武幸, 鈴木直紀
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 55 Pages: 662-667
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102
[Journal Article] Siウエハ仕上げ加工に及ぼす加工変質層の影響の解析2011
- Author(s)
  清水淳, 周立波, 小貫哲平, 尾嶌裕隆, 山本武幸, 鈴木直紀
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 55 Pages: 662-667
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560134
[Journal Article] Siウエハ仕上げ加工に及ぼす加工変質層の影響の解析2011
- Author(s)
  清水淳,周立波,小貫哲平,尾嶌裕隆,山本武幸,鈴木直紀
- Journal Title
  
  砥粒加工学会
  
  Volume: Vol.55, 11 Pages: 662-667
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360062
[Journal Article] Siウェハ仕上げ加工に及ぼす加工変質層の影響の解析2011
- Author(s)
  清水淳, 周立波, 小貫哲平,尾嶌裕隆, 山本武幸, 鈴木直紀
- Journal Title
  
  砥粒加工学会誌
  
  Volume: 55 Pages: 662-667
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360062
[Journal Article] ポテンシャルパラメータ制御によるシリコンウエハ化学作用援用研削の分子動力学シミュレーション2010
- Author(s)
  清水淳, 周立波, 山本武幸
- Journal Title
  
  砥粒加工学会誌 45/1
  
  Pages: 41-44
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Mold Fabricated by Nanoscratching for Nanoimprint Lithography2010
- Author(s)
  W. Ohsone, J. Shimizu, L. Zhou, H. Ojima, T. Onuki, T. Yamamoto, H. Huang
- Journal Title
  
  Advanced Materials Research
  
  Volume: Vols.126-128 Pages: 843-848
- DOI
  10.4028/www.scientific.net/amr.126-128.843
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102, KAKENHI-PROJECT-22560134
[Journal Article] Enhancement of Photocatalytic Reaction of Titanium Dioxide Film by Surface Texturing2010
- Author(s)
  J. Shimizu, L. Zhou, K. Takamori, H. Ojima, T. Yamamoto, H. Huang
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.654-656 Pages: 1784-1787
- DOI
  10.4028/www.scientific.net/msf.654-656.1784
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102, KAKENHI-PROJECT-22560134
[Journal Article] Molecular Dynamics Simulation of Chemical Reaction Assisted Grinding of Silicon Wafer by Controlling Interatomic Potential Parameters2010
- Author(s)
  Jun Shimizu, Libo Zhou, Takeyuki Yamamoto
- Journal Title
  
  Journal of Computational and Theoretical Nanoscience 7/10
  
  Pages: 1-6
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Molecular Dynamics Simulation of Chemical Reaction Assisted Grinding of Silicon Wafer by Controlling Interatomic Potential Parameters2010
- Author(s)
  Jun Shimizu, Libo Zhou, Takeyuki Yamamoto
- Journal Title
  
  Journal of Computational and Theoretical Nanoscience
  
  Volume: Vol.7 Pages: 2165-2170
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560134
[Journal Article] ポテンシャルパラメータ制御によるシリコンウエハ化学作用援用研削の分子動力学シミュレーション2010
- Author(s)
  清水淳, 周立波, 山本武幸
- Journal Title
  
  砥粒加工学会誌 Vol.45, No.1
  
  Pages: 41-44
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Molecular Dynamics Simulation of Rubbing Phenomena in Ultra-Precision Abrasive Machining2010
- Author(s)
  J. Shimizu, L. Zhou, T. Yamamoto, H. Huang
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vol.443 Pages: 417-422
- DOI
  10.4028/www.scientific.net/kem.443.417
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102, KAKENHI-PROJECT-22560134
[Journal Article] Siウエハインフィード研削における切削軌跡密度と機械剛性の影響(第1報:モデルと解析)2010
- Author(s)
  周立波, 光田孝仁, 清水淳, 田業氷, 山本武幸
- Journal Title
  
  砥粒加工学会誌 45/1
  
  Pages: 45-49
- NAID
  10026236898
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Siウエハインフィード研削における切削軌跡密度と機械剛性の影響第1報:モデルと解析2010
- Author(s)
  周立波, 光田孝仁, 清水淳, 田業氷, 山本武幸
- Journal Title
  
  砥粒加工学会誌 54巻
  
  Pages: 45-49
- NAID
  10026236898
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Siウエハインフィード研削における切削軌跡密度と機械剛性の影響(第2報:実験的考察)2010
- Author(s)
  周立波, 光田孝仁, 清水淳, 田業氷, 山本武幸
- Journal Title
  
  砥粒加工学会誌 45/2
  
  Pages: 92-96
- NAID
  10026236943
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Molecular Dynamics Simulation of Chemical Reaction Assisted Grinding of Silicon Wafer by Controlling Interatomic Potential Parameters2010
- Author(s)
  J. Shimizu, L. Zhou, T. Yamamoto
- Journal Title
  
  J.of Computational and Theoretical Nanoscience Vol.7, No.10
  
  Pages: 1-6
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] ポテンシャルパラメータ制御によるシリコンウエハ化学作用援用研削の分子動力学シミュレーション2010
- Author(s)
  清水淳, 周立波, 山本武幸
- Journal Title
  
  砥粒加工学会誌 54巻
  
  Pages: 41-44
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Enhancement of Photocatalytic Reaction of Titanium, Dioxide Film by Surface Texturing2010
- Author(s)
  Jun Shimizu, Libo Zhou, Kaoru Takamori, Hirotaka Ojima, Takeyuki Yamamoto, Han Huang
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.654-656 Pages: 1784-1787
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102
[Journal Article] Siウエハインフィード研削における切削軌跡密度と機械剛性の影響 (第2報 : 実験的考察)2010
- Author(s)
  周立波, 光田孝仁, 清水淳, 田業氷, 山本武幸
- Journal Title
  
  砥粒加工学会誌 Vol.45, No.2
  
  Pages: 92-96
- NAID
  10026236943
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Siウエハインフィード研削における切削軌跡密度と機械剛性の影響第2報:実験的考察2010
- Author(s)
  周立波, 光田孝仁, 清水淳, 田業氷, 山本武幸
- Journal Title
  
  砥粒加工学会誌 54巻
  
  Pages: 92-96
- NAID
  10026236943
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Molecular Dynamics Simulation of Chemical Reaction Assisted Grinding of Silicon Wafer by Controlling Interatomic Potential Parameters2010
- Author(s)
  Jun Shimizu, Libo Zhou, Takeyuki Yamamoto
- Journal Title
  
  Journal of Computational and Theoretical Nanoscience
  
  Volume: Vol.7 Pages: 2165-2170
- NAID
  10026236879
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560102
[Journal Article] Siウエハインフィード研削における切削軌跡密度と機械剛性の影響 (第1報 : モデルと解析)2010
- Author(s)
  周立波, 光田孝仁, 清水淳, 田業氷, 山本武幸
- Journal Title
  
  砥粒加工学会誌 Vol.45, No.1
  
  Pages: 45-49
- NAID
  10026236898
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Enhancement of Photocatalytic Reaction of Tifanium Dioxide Film by Surface Texturing2010
- Author(s)
  Jun Shimizu, Libo Zhou, Kaoru Takamori, Hirotaka Ojima, Takeyuki Yamamoto, Han Huang
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.654-656 Pages: 1784-1787
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22560134
[Journal Article] Molecular Dynamics Simulation of Chemo-mechanical Grinding (CMG) by Controlling Interatomic Potential Parameters to Imitate Chemical Reaction2009
- Author(s)
  清水淳, 周立波, 山本武幸
- Journal Title
  
  Advanced Materials Research Vol.76～78
  
  Pages: 82-87
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Siウエーハのレーザダイシングに関する研究=ピコ秒パルスレーザによる液中加工の検討=2009
- Author(s)
  山本武幸, 周立波, 清水淳, 溝口高史
- Journal Title
  
  光アライアンス 20(7)
  
  Pages: 20-23
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Research on Chemo-Mechanical-Grinding of Large Size Quartz Glass Substrate2009
- Author(s)
  L. ZHOU, T. SHIINA, Z.J. QIU, J. SHIMIZU, T. YAMAMOTO, Y. TASHIRO
- Journal Title
  
  Precision Engineering Vol.33
  
  Pages: 499-504
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Molecular Dynamics Simulation of Chemo-Mechanical Grinding(CMG)by Controlling Interatomic Potential Parameters to Imitate Chemical Reaction2009
- Author(s)
  J.Shimizu, L.Zhou, T.Yamamoto
- Journal Title
  
  Advanced Materials Research 76-78
  
  Pages: 82-86
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] 砥粒上すべり現象の分子動力学シミュレーション2009
- Author(s)
  清水淳, 周立波, 山本武幸
- Journal Title
  
  砥粒加工学会誌 53巻
  
  Pages: 751-755
- NAID
  10026236816
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Research on Chemo-mechanical Grinding of Large Size Quartz Glass Substrate2009
- Author(s)
  Libo Zhou, Takeshi Shiina, Zhongjun Qiu, Jun Shimizu, Takeyuki Yamamoto, Toshiaki Tashiro
- Journal Title
  
  Precision Engineering Vol.33
  
  Pages: 499-504
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Research on Chemo-Mechanical-Grinding of Large Size Quartz Glass Substrate2009
- Author(s)
  Libo ZHOU, Takeshi SHIINA, Zhongjun QIU, Jun SHIMIZU, Takeyuki YAMAMOTO, Toshiaki TASHIRO
- Journal Title
  
  Precision Engineering 33
  
  Pages: 499-504
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] 微小引っかきによるシリコンウエハ研削現象の解析2008
- Author(s)
  清水淳, 周立波, 山本武幸, 津村貴史, 岡部秀光, 江田弘
- Journal Title
  
  砥粒加工学会誌 52/10
  
  Pages: 601-606
- NAID
  10021923685
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] 微小引っかきによるシリコンウエハ研削現象の解析2008
- Author(s)
  清水淳, 周立波, 山本武幸, 津村貴史, 岡部秀光, 江田弘
- Journal Title
  
  砥粒加工学会誌 Vol.52, No.10
  
  Pages: 601-606
- NAID
  10021923685
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] 微小引っかきによるシリコンウエハ研削現象の解析2008
- Author(s)
  清水淳, 周立波, 山本武幸, 津村貴史, 岡部秀光, 江田弘
- Journal Title
  
  砥粒加工学会誌 52
  
  Pages: 603-608
- NAID
  10021923685
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20656028
[Journal Article] Research on Chemo-Mechanical-Grinding (CMG) of large size silica glass substrate2007
- Author(s)
  Takeshi SHIINA, Libo ZHOU, Zhongjun QIU, Takeyuki YAMAMOTO, Jun SHIMIZU, Hiroshi EDA
- Journal Title
  
  Proceeding of 4th LEM21
  
  Pages: 65-68
- NAID
  130007890884
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Journal Article] Fundamental Study on Cleavage-Cutting of Silicon Wafer by Ultra-Short Pulsed Laser2007
- Author(s)
  Atsushi HAGIYA, Takeyuki YAMAMOTO, Hirotaka OJIMA, Libo ZHOU, Jun SHIMIZU and Hiroshi EDA
- Journal Title
  
  Proceeding of 4th LEM21
  
  Pages: 879-882
- NAID
  130007890953
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] C面サファイア基板のナノスクラッチ特性（第2報）－nmオーダ送りにおけるスクラッチ異方性の考察－2023
- Author(s)
  清水淳，林旺票，矢野直彦，三枝剣悟，金子和暉，周立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] ナノスクラッチによるC面単結晶サファイア基板の加工特性の検討（単溝スクラッチにおける加工異方性）2022
- Author(s)
  清水　淳，林　旺票，矢野直彦，金子和暉，周　立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  日本機械学会第14回生産加工・工作機械部門講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第７報）－テクスチャ表面の摩耗挙動－2022
- Author(s)
  大矢一輝，山本武幸，清水淳，周立波，小貫哲平，尾嶌裕隆，金子和暉，深堀良彬
- Organizer
  精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] C面サファイア基板のナノスクラッチ特性－nmオーダ送りにおけるスクラッチ異方性－2022
- Author(s)
  三枝剣悟，林　王票，矢野直彦，清水　淳，金子和暉，周　立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 微小振動援用切削でテクスチャ加工した圧痕状パターンの周期的配置による金属表面の乾式すべり特性2022
- Author(s)
  清水　淳，山本武幸，金子和暉，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] ポテンシャル関数制御を用いたすべり摩擦現象の分子動力学解析（第４報）－hcp 結晶のアブレシブ摩耗異方性－2022
- Author(s)
  清水　淳，林　旺票，矢野直彦，周　立波，小貫哲平，尾嶌裕隆，山本武幸，金子和暉
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] Boundary Lubricity of Metal Surfaces Textured by Vibration-assisted Cuttin2022
- Author(s)
  Jun Shimizu, Kazuki Ohya, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima, Kazuki Kaneko, Yoshiaki Fukahori
- Organizer
  International conference on Precision Engineering (ICPE 2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] Study on Abrasive Wear Mechanism of C-plane Sapphire Using Nanoscratch Test and Molecular Dynamics Simulation of HCP Crystal2022
- Author(s)
  Jun Shimizu, Wangpiao Lin, Naohiko Yano, Kazuki Kaneko, Libo Zhou, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto, Kengo Saegusa
- Organizer
  The 24th International Symposium on Advances in Abrasive Technology (ISAAT 2022)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] hcp結晶の分子動力学解析結果を利用したc面サファイアのアブレシブ摩耗特性の評価2022
- Author(s)
  清水　淳，林　旺票，矢野直彦，周　立波，小貫哲平，尾嶌裕隆，金子和暉，山本武幸
- Organizer
  日本トライボロジー学会トライボロジー会議2022春
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 局所静水圧が切削現象に及ぼす効果の分子動力学シミュレーション―転がり要素の適用―2021
- Author(s)
  清水　淳，山本武幸，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 振動援用切削によるテクスチャ表面の潤滑特性の評価2021
- Author(s)
  萩尾大輝，山本武幸，清水　淳，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  砥粒加工学会学術講演会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第5報）－境界潤滑における油量の影響－2021
- Author(s)
  菊池晃太，山本武幸，清水　淳，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] Friction and Wear Behaviors of Textured Metal Surfaces by Vibration-assisted Microcutting in Dry Sliding2021
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第5報）－境界潤滑における油量の影響－2021
- Author(s)
  菊池晃太，山本武幸，清水　淳，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] Friction Characteristics of Metal Surfaces Textured by Vibrationassisted Cutting under Lubricated Environment2021
- Author(s)
  Daiki Hagio, Takeyuki Yamamoto, Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  The 23rd International Symposium on Advances in Abrasive Technology (ISAAT2021)
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] ポテンシャル関数制御を用いたすべり摩擦現象の分子動力学解析（第２報）－スライダの強度による影響に関する検討－2021
- Author(s)
  清水淳，周立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第６報）－境界潤滑におけるすべり速度の影響－2021
- Author(s)
  山本武幸，清水　淳，周　立波，小貫哲平，尾嶌裕隆，金子和暉
- Organizer
  精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] ポテンシャル関数制御を用いたすべり摩擦現象の分子動力学解析（第３報）－hcp結晶の加工異方性に関する検討－2021
- Author(s)
  清水　淳，林　旺票，矢野直彦，周　立波，小貫哲平，尾嶌裕隆，山本武幸，金子和暉
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] hcp 結晶の分子動力学解析を用いたc 面サファイアのアブレシブ摩耗特性の考察2021
- Author(s)
  清水　淳，林　旺票，矢野直彦，周　立波，小貫哲平，尾嶌裕隆，金子和暉，山本武幸
- Organizer
  日本トライボロジー学会トライボロジー会議2021秋
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 微小振動援用切削テクスチャ表面のなじみ特性に関する検討（第５報）－境界潤滑における初歩的な検討－2021
- Author(s)
  清水淳，山本武幸，菊池晃太，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  日本トライボロジ―学会トライボロジー会議2021春
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] Molecular Dynamics Simulation of Localized Hydrostatic Pressure-Assisted Cutting with a Rolling Element2021
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  The 23rd International Symposium on Advances in Abrasive Technology (ISAAT2021)
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 微小振動援用切削テクスチャ表面のなじみ特性に関する検討（第４報）－容積と面積密度の影響－2020
- Author(s)
  清水　淳, 中山智隆, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  日本トライボロジー学会トライボロジー会議秋別府
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] Friction Characteristics of Textured Metal Surfaces by Vibration-assisted Microcutting in Dry Sliding2020
- Author(s)
  Jun Shimizu, Tomotaka Nakayama, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  18th International conference on Precision Engineering (ICPE2020)
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第4報）－境界潤滑条件下における検討－2020
- Author(s)
  山本武幸, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆, 菊池晃太
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] ポテンシャル関数制御を用いたすべり摩擦現象の分子動力学解析（第１報）－酸化膜による影響に関する検討－2020
- Author(s)
  清水淳，周立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] Friction Characteristics of Textured Metal Surfaces by Vibration-assisted Microcutting in Dry Sliding2020
- Author(s)
  Jun Shimizu, Tomotaka Nakayama, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  18th International conference on Precision Engineering (ICPE2020)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 分子動力学シミュレーションによるhcp 結晶の変形・摩耗挙動の解析2020
- Author(s)
  矢野直彦, 林　旺票, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆, 山本武幸
- Organizer
  砥粒加工学会学術講演会(ABTEC2020)
- Data Source
  KAKENHI-PROJECT-20K04235
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第３報）ー塑性盛上りの除去による効果ー2020
- Author(s)
  清水　淳, 山本武幸, 中山智隆, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会春季大会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 振動援用切削によるテクスチャ表面の乾式すべり特性2020
- Author(s)
  清水　淳, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆, 菊池晃太
- Organizer
  砥粒加工学会学術講演会(ABTEC2020)
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 振動援用切削による表面テクスチャの摩擦特性（第2報）ーテクスチャ面積密度の影響ー2019
- Author(s)
  山本武幸, 中山智隆, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会秋季大会
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 放電付加加工による表面テクスチャの創成（第1報）―直線走査による単純テクスチャの創成―2019
- Author(s)
  小井沼陽希, 石井雅人, 川尻淳裕, 山本武幸, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Friction Characteristics of Textured Surfaces by Vibration-Assisted Microcutting in Dry Sliding2019
- Author(s)
  Jun Shimizu, Tomotaka Nakayama, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  International Tribology Conference (ITC 2019), Sendai
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 微小振動援用切削テクスチャ表面のなじみ特性に関する検討（第３報）－塑性盛上り除去と被覆率の効果－2019
- Author(s)
  清水　淳, 中山智隆, 渡辺康太, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  日本トライボロジ―学会トライボロジー会議2019春
- Data Source
  KAKENHI-PROJECT-19K04102
[Presentation] 局所圧縮静水圧援用切削の開発―すべりおよび転がり式冶具による切削性能への効果―2019
- Author(s)
  清水　淳, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆, 小松崎一気
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 微小振動援用切削テクスチャ表面のなじみ特性に関する検討2018
- Author(s)
  清水　淳, 中山智隆, 渡辺康太, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  日本トライボロジー学会トライボロジー会議春東京
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 局所圧縮静水圧援用切削の開発―すべりおよび転がり式冶具による検討―2018
- Author(s)
  清水　淳, 芦野洸人, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Running-in Behavior of Mechanically Microtextured Metal Surfaces in Dry Sliding2018
- Author(s)
  Tomotaka Nakayama, Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto, Kouta Watanabe
- Organizer
  The 17th International Conference on Precision Engineering (ICPE2018), Kamakura
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] ロータリー型インフィード平面研削メカニズムに関する研究－無線式動力計の開発と研削抵抗の評価－2018
- Author(s)
  石橋　憲, 月井裕太, 蛯名雄太郎, 周　立波, 清水　淳, 山本武幸, 小貫哲平, 尾嶌裕隆
- Organizer
  2018年度砥粒加工学会学術講演会(ABTEC2018)
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] マイクロ切削による表面テクスチャがすべり時のなじみ過程に及ぼす影響―慣用および振動援用切削の比較―2018
- Author(s)
  中山智隆, 渡辺康太, 山本武幸, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Cu-W細電極による微小放電堆積過程の検討2018
- Author(s)
  山本武幸, 石井雅人, 小井沼陽希, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Development of Localized Compressive Hydrostatic Pressure-assisted Cutting using Rolling Element2018
- Author(s)
  Jun Shimizu, Hiroto Ashino, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou, Kazuki Komatsuzaki
- Organizer
  International Conference on Precision Engineering (ICPE2018), Kamakura
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Development of Localized Compressive Hydrostatic Pressure-assisted Cutting using Sliding Element2018
- Author(s)
  Jun Shimizu, Hiroto Ashino, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  The 21st International Symposium on Advances in Abrasive Technology (ISAAT2018), Toronto, Canada
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 局所圧縮静水圧援用切削の開発―すべりおよび転がり式冶具による検討―2018
- Author(s)
  清水　淳, 芦野洸人, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 微小振動援用切削テクスチャ表面のなじみ特性に関する検討（第2報）― 被覆率による影響 ―2018
- Author(s)
  清水　淳, 中山智隆, 渡辺康太, 山本武幸, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  日本トライボロジー学会トライボロジー会議秋伊勢
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Cross-sectional measurement of laser damage in sapphire using confocal micro Raman spectrometer2018
- Author(s)
  Teppei Onuki, Kazuki Kamoshida, Takeyuki Yamamoto, Hirotaka Ojima, Jun Shimizu, Libo Zhou
- Organizer
  The 17th International Conference on Precision Engineering (ICPE2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Development of high efficiency CMG pellets for finishing mono-crystal sapphire2018
- Author(s)
  Jianbin Wang, Tomohito Maezaki, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto, Jun Shimizu, Libo Zhou
- Organizer
  The 21st International Symposium on Advances in Abrasive Technology (ISAAT2018)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] C面サファイア基板のナノ引っかきに関する研究－hcp金属のナノ引っかきシミュレーションによる変形挙動の解析－2018
- Author(s)
  林旺票, 清水淳, 周立波, 小貫哲平, 尾嶌裕隆, 山本武幸, 矢野直彦
- Organizer
  2018年度砥粒加工学会学術講演会(ABTEC2018)
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Examination of Micro EDM Deposition Mechanism using Thin Cu-W Electrode2017
- Author(s)
  Masato Ishii, Itaru Takahama, Takeyuki Yamamoto, Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 局所圧縮静水圧援用切削の開発－微小切削実験と分子動力学解析－2017
- Author(s)
  清水淳，山本武幸，尾嶌裕隆，小貫哲平，周立波，市村浩貴
- Organizer
  精密工学会春季大会学術講演会
- Place of Presentation
  慶應義塾大学（矢上）
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Study on Nanoscratching of C-plane Sapphire Wafer2017
- Author(s)
  Wangpiao Lin, Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima and Takeyuki Yamamoto
- Organizer
  20th International Symposium on Advances in Abrasive Technology (ISAAT2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Development of localized compressive hydrostatic stress-assisted cutting method: Examination by molecular dynamics simulation and microcutting experiment2017
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou, Keito Uezaki
- Organizer
  euspen's 17th International Conference & Exhibition
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Development of Localized Compressive Hydrostatic Pressure-assisted Cutting Method2017
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou, Hiroto Ashino
- Organizer
  The 20th International Symposium on Advances in Abrasive Technology (ISAAT2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] 局所圧縮静水圧援用切削の開発―すべり式冶具を用いた旋削実験―2017
- Author(s)
  清水　淳, 山本武幸, 尾嶌裕隆, 小貫哲平, 周　立波, 芦野洸人
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Development of Localized Compressive Hydrostatic Pressure-assisted Cutting Method2017
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou, Hiroto Ashino
- Organizer
  The 20th International Symposium on Advances in Abrasive Technology (ISAAT2017)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Cu-W細電極による微小放電堆積加工メカニズム2017
- Author(s)
  山本武幸, 石井雅人, 高濱　到, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Study on micro EDM deposition in Ar atmosphere2016
- Author(s)
  Itaru Takahama, Takeyuki Yamamoto, Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  16th International Conference on Precision Engineering (ICPE2016)
- Place of Presentation
  アクトシティ浜松
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 振動援用切削によるサブミクロンスケールの表面テクスチャ加工2016
- Author(s)
  小島純弥，渡辺康太, 山本武幸, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  日本機械学会関東支部・精密工学会　茨城講演会
- Place of Presentation
  茨城大学（日立）
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Stress analysis of LT wafer during grinding process2016
- Author(s)
  Wentong LU, Libo ZHOU, Jun SHIMIZU, Teppei ONUKI, Hirotaka OJIMA, Takeyuki YAMAMOTO
- Organizer
  16th International Conference on Precision Engineering (ICPE2016)
- Place of Presentation
  Hamamatsu/Japan
- Year and Date
  2016-11-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Texturing of metal surface by using vibration-assisted microcutting2016
- Author(s)
  Jun Shimizu, Kouta Watanabe, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  euspen's 16th International Conference & Exhibition
- Place of Presentation
  East Midlands Conference Centre, Nottingham, UK
- Year and Date
  2016-06-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] 研削シリコンウエハのナノ引っかき2016
- Author(s)
  清水　淳，林　旺票, 周　立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  砥粒加工学会学術講演会
- Place of Presentation
  兵庫県立大学（姫路）
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Cu-W電極を用いた微小放電堆積加工2016
- Author(s)
  高濱　到，石井雅人，山本武幸，清水　淳，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  茨城大学（水戸）
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] アルゴンガス中におけるマイクロ放電堆積に関する研究2016
- Author(s)
  高濱　到, 山本武幸, 清水　淳, 周　立波, 小貫哲平, 尾嶌裕隆
- Organizer
  第17回高エネ研メカ・ワークショップ
- Place of Presentation
  高エネルギー加速器研究機構（つくば）
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] Texturing of metal surface by using vibration-assisted microcutting2016
- Author(s)
  Jun Shimizu, Kouta Watanabe, Takeyuki Yamamoto, Hirotaka Ojima, Teppei Onuki, Libo Zhou
- Organizer
  euspen's 16th International Conference & Exhibition
- Place of Presentation
  East Midlands Conference Centre, Nottingham, UK
- Year and Date
  2016-06-01
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K06000
[Presentation] 微小テクスチャ金型の開発とその応用（第４報）－振動援用引っかき条件の微小化－2016
- Author(s)
  渡辺康太，山本武幸，清水　淳，周　立波，尾嶌裕隆，小貫哲平
- Organizer
  精密工学会春季大会学術講演会
- Place of Presentation
  東京理科大学（野田）
- Year and Date
  2016-03-17
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] 振動援用引っかきによる表面微小テクスチャリング2015
- Author(s)
  清水　淳，山本武幸，周　立波，小貫哲平，尾嶌裕隆，岡山幸洋
- Organizer
  日本トライボロジー学会トライボロジー会議（春）
- Place of Presentation
  姫路商工会議所
- Year and Date
  2015-05-29
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] Development of Microtextured Titanium Dioxide Surface by Using Microcutting Techniques2015
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  The 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE)
- Place of Presentation
  Vancouver, Canada
- Year and Date
  2015-06-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Molecular dynamics simulation of relationship between friction anisotropy and atomic-scale stick-slip phenomenon2015
- Author(s)
  Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto
- Organizer
  The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Kyoto, Japan
- Year and Date
  2015-10-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Surface Texturing by Using Vibration-assisted Microscratching2015
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima, Libo Zhou
- Organizer
  International Tribology Conference (ITC) 2015
- Place of Presentation
  Tokyo, Japan
- Year and Date
  2015-06-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] Surface Texturing by Using Vibration-assisted Microscratching2015
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima, Libo Zhou
- Organizer
  International Tribology Conference 2015
- Place of Presentation
  東京理科大学（葛飾）
- Year and Date
  2015-09-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] ピコ秒レーザによる単結晶ダイヤモンドの精密加工－簡単な表面テクスチャの創成－2015
- Author(s)
  山本武幸，薄憲司朗，小貫哲平，尾嶌裕隆，清水　淳，周　立波
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学（川内北）
- Year and Date
  2015-09-06
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] Molecular Dynamics Simulation of Cutting Process Accompanied by a Localized Compressive Hydrostatic Stress Field Formation2015
- Author(s)
  Keito Uezaki, Jun Shimizu, Libo Zhou, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima
- Organizer
  International Tribology Conference 2015
- Place of Presentation
  東京理科大学（葛飾）
- Year and Date
  2015-09-17
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Development of Microtextured Titanium Dioxide Surface by Using Microcutting Techniques2015
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications
- Place of Presentation
  Hyatt Regency, Vancouver, Canada
- Year and Date
  2015-06-18
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] 局所圧縮静水圧場の生成を伴う切削過程の分子動力学シミュレーション－工具形状の改良－2015
- Author(s)
  清水淳，植崎圭人，馬海東，宮田翔哉，小貫哲平，尾嶌裕隆，山本武幸，周立波
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学（川内北）
- Year and Date
  2015-09-05
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] Molecular Dynamics Simulation of Cutting Process Accompanied by a Localized Compressive Hydrostatic Stress Field Formation2015
- Author(s)
  Keito Uezaki, Jun Shimizu, Libo Zhou, Takeyuki Yamamoto, Teppei Onuki, Hirotaka Ojima
- Organizer
  International Tribology Conference (ITC) 2015
- Place of Presentation
  Tokyo, Japan
- Year and Date
  2015-06-16
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H02213
[Presentation] 研削シリコンウエハ加工変質層のナノインデンテーション2015
- Author(s)
  清水　淳，周　立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  砥粒加工学会学術講演会
- Place of Presentation
  慶應義塾大学（日吉）
- Year and Date
  2015-09-10
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] Molecular Dynamics Simulation of Relationship between Friction Anisotropy and Atomic-scale Stick-slip Phenomenon2015
- Author(s)
  Jun Shimizu, Libo Zhou, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto
- Organizer
  The 8th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  京都リサーチパーク
- Year and Date
  2015-10-20
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15K05753
[Presentation] 振動援用切削による表面微小テクスチャ加工2015
- Author(s)
  渡辺康太，山本武幸，清水　淳，周　立波，小貫哲平，尾嶌裕隆
- Organizer
  日本機械学会関東支部主催「茨城講演会」
- Place of Presentation
  茨城大学工学部
- Year and Date
  2015-08-28
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] ピコ秒レーザによる単結晶ダイヤモンドの精密加工－マイクロ溝加工の検討－2014
- Author(s)
  山本武幸，植崎圭人，岩井俊樹，小貫哲平，清水　淳，周　立波，尾嶌裕隆
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  鳥取大学（鳥取）
- Year and Date
  2014-09-16
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] 振動援用引っかきによる掘起しを利用した表面微小テクスチャリング2014
- Author(s)
  清水　淳，山本武幸，周　立波，尾嶌裕隆，小貫哲平，岡山幸洋
- Organizer
  日本トライボロジー学会トライボロジー会議（秋岩手）
- Place of Presentation
  アイーナいわて
- Year and Date
  2014-11-07
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] 分子動力学によるシリコンウエハ加工変質層のナノインデンテーションの解析2014
- Author(s)
  古牧允彦，清水　淳，周　立波，小貫哲平，尾嶌裕隆，山本武幸
- Organizer
  砥粒加工学会学術講演会
- Place of Presentation
  岩手大学工学部
- Year and Date
  2014-09-11
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] Control of the incubation effects in pulsed laser micro machining on ferroelectric lithium niobate substrates2013
- Author(s)
  Teppei ONUKI, Ippei MURAYAMA, Takeyuki YAMAMOTO, Hirotaka OJIMA, Jun SHIMIZU and Libo ZHOU
- Organizer
  Proceedings of 7th LEM21
- Place of Presentation
  Sendai/Japan (査読有,67-70)
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] ダイヤモンド砥石における砥粒切れ刃の3次元分布2013
- Author(s)
  蛯名雄太郎,杭偉,周立波,清水淳,小貫哲平,尾嶌裕隆,山本武幸,渡辺拓也
- Organizer
  2013年度精密工学会春季学術講演会
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Development of Microtextured Photocatalytic Surface by Vibration-assisted Scratching2013
- Author(s)
  Jun Shimizu, Takeyuki Yamamoto, Libo Zhou, Teppei Onuki, Hirotaka Ojima
- Organizer
  THERMEC 2013
- Place of Presentation
  Rio Hotel, Las Vegas, USA
- Invited
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] 微小テクスチャ金型の開発とその応用（第３報）－圧子の稜を用いた微小切削によるテクスチャパターンの複雑化－2013
- Author(s)
  山本武幸，清水　淳，周　立波，尾嶌裕隆，小貫哲平
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  関西大学（千里山）
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] Three-dimensional cutting edge distribution of abrasives on diamond grinding wheel working surface2013
- Author(s)
  Libo ZHOU, Yutaro EBINA, Jun SHIMIZU, Teppei ONUKI, Hirotaka OJIMA and Takeyuki YAMAMOTO
- Organizer
  Proceedings of 6th LEM21
- Place of Presentation
  Sendai/Japan (査読有,79-84)
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Three-dimensional cutting edge distribution of abrasives on diamond grinding wheel working surface2013
- Author(s)
  Libo ZHOU, Yutaro EBINA, Jun SHIMIZU, Teppei ONUKI, Hirotaka OJIMA and Takeyuki YAMAMOTO
- Organizer
  日本機械学会，6th Int’l Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  仙台
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Three-dimensional cutting edge distribution of abrasives on diamond grinding wheel working surface2013
- Author(s)
  Libo Zhou, Yutaro Ebina, Jun Shimizu, Teppei Onuki, Hirotaka Ojima, Takeyuki Yamamoto
- Organizer
  7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  ホテル松島大観荘（宮城県）
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] ダイヤモンド砥石における砥粒切れ刃の3次元分布2013
- Author(s)
  蛯名雄太郎，杭偉，周立波，清水淳小貫哲平，尾嶌裕隆，山本武幸，渡辺拓也
- Organizer
  2013年度精密工学会春季学術講演会
- Place of Presentation
  東京工業大学大岡山キャンパス
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] 化学作用援用研削の分子動力学シミュレーション－シリコンウエハ-砥粒間の凝着の影響－2013
- Author(s)
  清水　淳, 周　立波, 山本武幸, 尾嶌裕隆, 小貫哲平, 古牧允彦
- Organizer
  砥粒加工学会、ABTEC2013
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] 化学作用援用研削の分子動力学シミュレーション-シリコンウエハ/砥粒間の凝着の影響-2013
- Author(s)
  清水淳, 周立波, 山本武幸, 尾嶌裕隆, 小貫哲平, 古牧允彦
- Organizer
  砥粒加工学会,ABTEC2013
- Place of Presentation
  日本大学
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Control of the incubation effects in pulsed laser micro machining on ferroelectric lithium niobate substrates2013
- Author(s)
  Teppei Onuki, Ippei Murayama, Takeyuki Yamamoto, Hirotaka Ojima, Jun Shimizu, Libo Zhou
- Organizer
  7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  ホテル松島大観荘（宮城県）
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] 掘起しの有効活用による表面微小テクスチャの創成2013
- Author(s)
  清水　淳，山本武幸，周　立波，尾嶌裕隆，小貫哲平
- Organizer
  日本トライボロジー学会トライボロジー会議（秋福岡）
- Place of Presentation
  アクロス福岡（福岡県）
- Data Source
  KAKENHI-PROJECT-25420043
[Presentation] 微小テクスチャ金型の開発とその応用-振動切削による金型製造と透明電極への適用-2012
- Author(s)
  山本武幸
- Organizer
  精密工学会秋季大会
- Place of Presentation
  九州工業大学(戸畑)
- Year and Date
  2012-09-14
- Data Source
  KAKENHI-PROJECT-22560102
[Presentation] Siウエハ仕上げ加工に及ぼす加工変質層の影響2012
- Author(s)
  清水淳，周立波，小貫哲平，尾嶌裕隆，山本武幸，高野巧一郎
- Organizer
  2012年度砥粒加工学会（ABTEC2012）
- Place of Presentation
  同志社大学京田辺キャンパス
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] ナノインデンテーションにおけるデータ解析手法2012
- Author(s)
  杭偉，周立波，清水淳，山本武幸
- Organizer
  2012年度砥粒加工学会（ABTEC2012）
- Place of Presentation
  同志社大学京田辺キャンパス
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] 微小テクスチャ金型の開発とその応用－振動切削による金型製造と透明電極への適用－2012
- Author(s)
  山本武幸
- Organizer
  精密工学会秋季大会
- Place of Presentation
  九州工業大学（戸畑）
- Data Source
  KAKENHI-PROJECT-22560102
[Presentation] ナノインデンテーションにおけるデータの解析手法2012
- Author(s)
  杭偉,周立波,清水淳,山本武幸
- Organizer
  砥粒加工学会,ABTEC2012
- Place of Presentation
  同志社大学
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Si ウエハ仕上げ加工に及ぼす加工変質層の影響2012
- Author(s)
  清水淳,周立波,小貫哲平,尾嶌裕隆,山本武幸
- Organizer
  砥粒加工学会,ABTEC2012
- Place of Presentation
  同志社大学
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] 微小切削テクスチャによる光触媒機能の向上に関する研究2011
- Author(s)
  山本武幸
- Organizer
  精密工学会秋季大会
- Place of Presentation
  金沢大学(角間)
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-22560102
[Presentation] Nanomold Fabrication by Scratching and Its Application to Nanoimprint Lithography2011
- Author(s)
  J.Shimizu, W.Ohsone, H.Ojima, T.Onuki, L.Zhou, T.Yamamoto
- Organizer
  6th Int'l Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Saitama, Japan
- Year and Date
  2011-11-09
- Data Source
  KAKENHI-PROJECT-22560134
[Presentation] SPMによるナノ構造の創成に関する研究-機械および電気的手法による検討-2011
- Author(s)
  清水淳, 高野巧一郎, 尾嶌裕隆, 小貫哲平, 山本武幸, 周立波
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  金沢大学(角間)
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-22560134
[Presentation] Molecular Dynamics Simulation of Energy Dissipation Process in Atomic-scale Stick-slip Phenomenon2011
- Author(s)
  J.Shimizu, L.Zhou, T.Yamamoto
- Organizer
  Int'l Tribology Conference 2011
- Place of Presentation
  Hiroshima, Japan
- Year and Date
  2011-11-01
- Data Source
  KAKENHI-PROJECT-22560134
[Presentation] Molecular Dynamics Simulation of Energy Dissipation Process in Atomic-scale Stick-slip Phenomenon2011
- Author(s)
  J.Shimizu, L.Zhou, T.Yamamoto
- Organizer
  Int'l Tribology Conference 2011
- Place of Presentation
  Hiroshima, Japan
- Year and Date
  2011-11-01
- Data Source
  KAKENHI-PROJECT-22560102
[Presentation] Molecular Dynamics Simulation of Energy Dissipation Process in Atomic-scale Stick-slip Phenomenon2011
- Author(s)
  J.Shimizu, L.Zhou, Takeyuki Yamamoto
- Organizer
  Int'l Tribology Conference 2011
- Place of Presentation
  Hiroshima, Japan
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Image based defect detection Algorithm by use of wavelet transformation2011
- Author(s)
  Kaoru TAKAMORI, Hirotaka OJIMA, Libo ZHOU, Teppei ONUKI, Jun SHIMIZU and Takeyuki YAMAMOTO
- Organizer
  Proceedings of 6thLEM21
- Place of Presentation
  Saitama/Japan (CD-ROM)
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] 微小切削テクスチャによる光触媒機能の向上に関する研究2011
- Author(s)
  山本武幸, 小林剛, 清水淳, 尾嶌裕隆, 小貫哲平, 周立波
- Organizer
  精密工学会秋季大会学術講演会
- Place of Presentation
  金沢大学(角間)
- Year and Date
  2011-09-21
- Data Source
  KAKENHI-PROJECT-22560102
[Presentation] Image based defect detection Algorithm by use of wavelet transformation2011
- Author(s)
  K.TAKAMORI, H.OJIMA, L.ZHOU, T.ONUKI, J.SHIMIZU, T.YAMAMOTO
- Organizer
  6th Int'l Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Saitama, Japan
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] Nanomold Fabrication by Scratching and Its Application to Nanoimprint Lithography2011
- Author(s)
  J.Shimizu, W.Ohsone, H.Ojima, T.Onuki, L.Zhou, T.Yamamoto
- Organizer
  6th Int'l Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Saitama, Japan
- Year and Date
  2011-11-09
- Data Source
  KAKENHI-PROJECT-22560102
[Presentation] Nanomold Fabrication by Scratching and Its Application to Nanoimprint Lithography2011
- Author(s)
  J.SHIMIZU, W.OHSONE, H.OJIMA, T.ONUKI, L.ZHOU, T.YAMAMOTO
- Organizer
  6th Int'l Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Saitama, Japan
- Data Source
  KAKENHI-PROJECT-23360062
[Presentation] 光触媒膜に関する基礎的研究(第2報)-マイクロ切削によるテクスチャリングの効果-2009
- Author(s)
  清水淳, 梓沢慶介, 北條敬之, 周立波, 山本武幸, 尾嶌裕隆
- Organizer
  2009年度精密工学会春季大会学術講演会
- Place of Presentation
  中央大学後楽園キャンパス
- Year and Date
  2009-03-13
- Data Source
  KAKENHI-PROJECT-20656028
[Presentation] Molecular Dynamics Simulation of Chemo-Mechanical Grinding by Controlling Interatomic Potential Parameters to Imitate Chemical Reaction2009
- Author(s)
  J. Shimizu, L. Zhou, T. Yamamoto
- Organizer
  Advanced Materials Research
- Place of Presentation
  Gold Coast/Australia
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] Development of integrated cup grinding wheel for Si wafer thinning process2009
- Author(s)
  田業氷, 周立波, 佐藤悠, 清水淳, 山本武幸
- Organizer
  2009年度精密工学会春季大会
- Place of Presentation
  中央大学後楽園キャンパス
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 物理・化学作用によるSiC加工に関する研究2009
- Author(s)
  三浦伸互, 周立波, 清水淳, 山本武幸
- Organizer
  日本機械学会・茨城講演会
- Place of Presentation
  茨城県,筑波大学
- Year and Date
  2009-08-25
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] シリコンウエハ研削における切込み回数の影響の分子動力学シミュレーション2009
- Author(s)
  清水淳, 周立波, 山本武幸
- Organizer
  砥粒加工学会・ABTEC2009
- Place of Presentation
  埼玉県・ものつくり大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] ピコ秒パルスレーザによるシリコンウエハの化学反応援用割断に関する研究2009
- Author(s)
  山本武幸
- Organizer
  精密工学会秋季夫会学術講演会
- Place of Presentation
  神戸大学(兵庫県)
- Year and Date
  2009-09-10
- Data Source
  KAKENHI-PROJECT-20656028
[Presentation] Research on Chemical Reaction Assisted Ultra-short Pulsed Laser Cleavage-cutting of Sillicon Wafer2009
- Author(s)
  Takashi Mizoguchi, Libo Zhou, Jun Shimizu, Hirotaka Ojima, Takeyuki Yamamoto
- Organizer
  5th International Conference on Leading Edge Manufacturing in 21st Century(LEM21)
- Place of Presentation
  Osaka/Japan
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] ポテンシャルパラメータ制御によるシリコンウエハ化学作用援用研削・研磨現象の分子動力学シミュレーション2009
- Author(s)
  清水淳, 周立波, 山本武幸
- Organizer
  トライボロジー会議2009春
- Place of Presentation
  東京,国立オリンピック記念青少年総合センター
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] SPMによるナノ構造の創成に関する研究-反復と試料-プローブ間距離が陽極酸化パターンに及ぼす影響-2008
- Author(s)
  清水淳, 陶久夢高, 周立波, 山本武幸, 青木俊暁
- Organizer
  2008年度精密工学会秋季大会
- Place of Presentation
  東北大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] CMGによる大口径石英ガラスの研削加工2008
- Author(s)
  周立波, 清水淳, 椎名剛志, 山本武幸, 田代芳章
- Organizer
  2008年度砥粒加工学会
- Place of Presentation
  滋賀県立大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 微小引っかきによるシリコンウエハ研削現象の解析2008
- Author(s)
  清水淳, 周立波, 山本武幸, 津村貴史
- Organizer
  2008年度砥粒加工学会
- Place of Presentation
  滋賀県立大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] SPMによるナノ構造の創成に関する研究-反復と試料-プローブ問距離が陽極酸化パターンに及ぼす影響-2008
- Author(s)
  清水淳, 陶久夢高, 周立波, 山本武幸, 青木俊暁
- Organizer
  2008年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学川内北キャンパス
- Year and Date
  2008-09-19
- Data Source
  KAKENHI-PROJECT-20656028
[Presentation] 引っかきによるナノパターン創成に関する研究2008
- Author(s)
  清水淳, 周立波, 山本武幸, 大谷健太郎
- Organizer
  2008年度砥粒加工学会
- Place of Presentation
  滋賀県立大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 電気・機械的手法によるナノ構造の創成に関する研究2008
- Author(s)
  清水淳, 周立波, 山本武幸
- Organizer
  日本機械学会第7回生産加工・工作機械部門講演会
- Place of Presentation
  長良川国際会議場
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 引っかきによるナノパターン創成に関する研究2008
- Author(s)
  清水淳, 周立波, 山本武幸, 大谷健太郎
- Organizer
  2008年度砥粒加工学会学術講演会
- Place of Presentation
  滋賀県立大学
- Year and Date
  2008-09-03
- Data Source
  KAKENHI-PROJECT-20656028
[Presentation] シリコンウエハのナノスクラッチングに関する研究2008
- Author(s)
  川口恵理子, 陶久夢高, 清水淳, 周立波, 山本武幸
- Organizer
  日本機械学会茨城講演会
- Place of Presentation
  茨城大学日立キャンパス
- Year and Date
  2008-09-12
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] Observation of Surface Topography during Chemo-Mechanical Grinding (CMG) Process2008
- Author(s)
  田業氷, 佐藤悠, 佐々木淳一, 周立波, 清水淳, 山本武幸
- Organizer
  2008年度精密工学会秋季大会
- Place of Presentation
  東北大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 原子間ポテンシャルパラメータの制御によるシリコンウエハ機械・化学研削の分子動力学シミュレーション2008
- Author(s)
  清水淳, 周立波, 山本武幸
- Organizer
  日本機械学会第21回計算力学講演会
- Place of Presentation
  琉球大学
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 超短パルスレーザによる単結晶ダイヤモンド加工に関する研究2008
- Author(s)
  溝口高史, 萩谷淳史, 山本武幸, 清水淳, 周立波, 江田弘
- Organizer
  精密工学会・第15回学生会員卒業研究発表
- Place of Presentation
  明治大学
- Year and Date
  2008-03-17
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] Research on CMG of large size silica glass substrate2007
- Author(s)
  T. Shina, L. Zhou, Z.J Qiu, T. Yamamoto, J. Shimizu, H. Eda
- Organizer
  Proceeding of LEM21
- Place of Presentation
  Fukuoka/Japan
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 石英ガラスのCMG加工に関する研究2007
- Author(s)
  土屋大基, 椎名剛志, 周立波, 山本武幸, 清水淳, 江田弘
- Organizer
  日本機械学会茨城講演会
- Place of Presentation
  茨城大学
- Year and Date
  2007-09-28
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 金型の微細加工に関する研究2007
- Author(s)
  川瀬大智, 山本武幸, 周立波, 清水淳.江田弘
- Organizer
  日本機械学会茨城講演会
- Place of Presentation
  茨城大学
- Year and Date
  2007-09-28
- Data Source
  KAKENHI-PROJECT-19360056
[Presentation] 超短パルスレーザによるSiウエハ割断法に関する研究2007
- Author(s)
  溝口高史, 萩谷淳史, 山本武幸, 周立波, 清水淳, 江田弘
- Organizer
  日本機械学会茨城講演会
- Place of Presentation
  茨城大学
- Year and Date
  2007-09-28
- Data Source
  KAKENHI-PROJECT-19360056

1. SHIMIZU Jun (40292479)

# of Collaborated Projects: 13 results

# of Collaborated Products: 182 results
2. OJIMA Hirotaka (90375361)

# of Collaborated Projects: 13 results

# of Collaborated Products: 125 results
3. ZHOU Libo (90235705)

# of Collaborated Projects: 12 results

# of Collaborated Products: 171 results
4. ONUKI Teppei (70400447)

# of Collaborated Projects: 11 results

# of Collaborated Products: 120 results
5. 江田弘 (60007995)

# of Collaborated Projects: 1 results

# of Collaborated Products: 9 results
6. KAMIYA Sumio

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. IWASE Hisao

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. YAMASHITA Teruki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. TASHIRO Yoshiaki

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
10. TIAN Yebin

# of Collaborated Projects: 1 results

# of Collaborated Products: 13 results

YAMAMOTO Takeyuki 山本 武幸

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Examination of replaceability of scraping with texturing by micro-vibration assisted cuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of hard film texture coated tool by scanning micro discharge additional processing in gas atmospherePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Life elongation by texturing and edge formation of monocrystalline diamond tool using ps pulse laserPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Application of micro-transcription by using nano-cutting mold to development of high-functional dye-sensitized solar cellPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] 振動援用切削でテクスチャ加工した圧痕状パターン周期配置型金属面の乾式すべり特性2023

Author(s)

Journal Title

Data Source

[Journal Article] Friction Characteristics of Mechanically Microtextured Metal Surface in Dry Sliding2020

Author(s)

Journal Title

YAMAMOTO Takeyuki 山本武幸

[Journal Article] 日本縦断研究室巡り「茨城大学　Nano-Engineering Laboratory (nLab)」2014