Takeuchi Yoshimi 竹内芳美

… Alternative Names

TAKEUCHI Yoshimi 竹内芳美

竹内芳美タケウチヨシミ

Less

Researcher Number	50107546
Other IDs
External Links
Affiliation (Current)	2025: 中部大学, その他の部局, 理事長
Affiliation (based on the past Project Information) *help	2017: 中部大学, 工学部, 教授 2011 – 2013: 中部大学, 工学部, 教授 2009: 大阪大学, 工学研究科, 教授 2007: Osaka University, 大学院・工学研究科, 教授 2002 – 2005: Osaka University. Graduate School of Engineering, Professor, 大学院・工学研究科, 教授 1988 – 2001: 電気通信大学, 電気通信学部, 教授 1986: 九工大, 工学部, 助教授
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / 機械工作 / Production engineering/Processing studies Except Principal Investigator 機械工作 / Production engineering/Processing studies / 機械工作・生産工学 / 機械力学・制御工学
Keywords	Principal Investigator マシニングセンタ / 超精密加工 / CAM / マイクロ加工 / 5軸制御 / Micromachining / 溝加工 / 非回転工具 / 6軸制御 / 干渉回避 … More / 3次元測定機 / Ultraprecision machining / Diamond tool / CAD / ダイヤモンド工具 / 6軸制御加工 / Non-rotational cutting tool / Machining center / 自動測定 / フライス加工 / CAMシステム / ポストプロセッサ / 研削加工 / ソリッドモデル / Micropump / CAM system / 6-axis Control / Complex functional devices / 止り溝加工 / 曲面 / マイクロポンプ / 複合機能素子 / machining simulator / remote operation / autonomous machining cell / machining processor / multi-axis control / information / intelligence / machine tools / 加工シミュレータ / 自律型加工セル / 加工シミュレーション / 遠隔操作 / 自立型加工セル / マシニングプロセッサ / 多軸制御 / 情報化 / 知能化 / 工作機械 / 3D-CAD / Metal mold / Micro pin array / Rotational diamond tool / Micro parts / High aspect ratio / 超精密切削加工 / 3次元CAD / 金型 / マイクロ針群 / ダイヤモンド回転工具 / マイクロ部品 / 高アスペクト比 / 5-axis control Machining / Soft material / Post Processor / Main processor / Vibrational cutting / 6-axis control Machining / 5軸制御加工 / 軟質材 / メインプロセッサ / 振動切削 / Ultrapuecision milling / Wedge effect / High positioning accuracy / Ultraprecision micromachining / V-shaped microgroove / Direct bouding / 組立て技術 / マイクロダイヤモンド工具 / 超精密マシニングセンタ / くさび効果 / 無接着剤 / 精密位置決め / 接合 / マイクロV溝 / Grooving / 5-Axis control / Ultraprecision / pocket milling / corner shaping / sculptured surface / CAM software / non-rotational cutting tool / 6-axis control machining / 角穴加工 / 角隅加工 / Pseudo ball end mill / Brittle material / Milling / Micromachine / Ultrapreision / 超精密加工機 / マイクロマシシニング / 脆性材料 / 疑似ボールエンドミル / マイクロマシン / マイクロマシニング / Surface roughness / Asymmetrical groove / Sculptured surface / Finishing / 6-axis control / ヘール加工 / 表面粗さ / 異形断面溝加工 / 自由曲面 / 平滑加工 / 測定プローブ経路 / パターンマッチング / パソコン / 画像データ / CADデータ / 測定経路 / 形状認識 / 画像処理,パソコン / 画像入力装置 / 超精密マイクロ加工 / 旋削加工 / ＣＡＭ / 難把持形状 / 高付加価値製品 / 柔軟材 / 複雑形状 / 複合加工機 / 巧妙加工 / インデューサ / 軸流マイクロポンプ / マイクロロボット / 管内自走 / 曲がり穴 / 放電加工 / リニアライゼーション / 加工誤差計測 / 高表面精度 / 切削加工 / 総合化 / CAD@CAMシステム / 磨きロボット / 金型製作 … More Except Principal Investigator CAD / 超精密計測 / 機械工作・生産工学 / 精密部品加工 / ダイヤモンド工具 / 機上計測 / 超精密切削加工 / Accuracy Design / Five-axis Machinig Center / Error analysis / From shaping theory / Machine tools / 精度設計 / 5軸マシニングセンタ / 加工誤差 / 形状創成運動 / 工作機械 / Flexible production structure / Culture of Manufacturing / Thermal deformation constrained structure / Sensor / Design methodology / Manufacturing systems / Mobile Cubic Cell / フレキシブル生産体制 / 生産文化 / 熱変形抑制構造 / センサー / 設計方法論 / 生産システム / 自走形Cubicセル / Non-Contact Measurement / 3-D Form Measurement / Expert System / Fuzzy Control / Robot / Polishing Tools / Automatic Polishing / Metal Molds / 非接触計測 / 三次元形状計測 / エキスパ-トシステム / ファジィ制御 / ロボット / 研磨工具 / 自動研磨 / 金型製造 / 制御実験 / パーソナルコンピュータ / 圧電素子 / 回転アクチュエータ / 超精密回転位置決め / 機械加工・生産工学 / CAM / 位置姿勢制御電極 / 放電加工 / 断面変化穴 / 21世紀初頭 / 技術分野 / 生産科学 / 失敗 / 技術伝承 / ものづくり Less

Development of an autonomous ultra-precision machine tool having functions of on-machine measurement and tool shaping
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Study on dexterous machining to create high value-added productsPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Chubu University
Creation of Cross Section's Changing Holes by means of Electrical Discharge Machining Using a Tool Electrode with Posture and Position Controllable Function
- Principal Investigator
  
  ISHIDA Tohru
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
人体血液輸送用軸流マイクロポンプの創成に関する基礎研究Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  2007
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
自律型マイクロロボットによる小径複雑曲がり穴加工に関する基礎研究Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  2005
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
6-Axis Control Ultraprecision Micromachining of Complex Functional DevicesPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
STUDY ON MULTI-FUNCTION MACHININIG PROCESSOR CORRESPONDING TO INTELLIGENCE AND INFORMATIONPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  OSAKA UNIVERSITY
21世紀初頭のものづくりの学術基盤としての生産科学・技術の企画調査
- Principal Investigator
  
  NISHIWAKI Nobuhiko
- Project Period (FY)
  2001
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo University of Agriculture and Technology
Creation of Ultraprecision Micro Parts with High Aspect Ratio and Complex Shape and its ApplicationPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Osaka University
  The University of Electro-Communications
Accurate Machining of Difficult-to-Machine Shapes by Means of 6-Axis Control Vibrfational CuttingPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  The University of Electro-Communications
Direct Bonding of Small Parts by Means of Ultraprecision Microgrooving TechnologyPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  機械工作・生産工学
- Research Institution
  The University of Electro-Communications
3-Dimensional Microparts Machining by Ultraprecision 5-Axis control Machinig CenterPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  The University of Electro-Communications
Edged Corner Shaping and Pocket Milling by Means of 6-Axis Control MachiningPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  University of Electro-Communications
Development of Micromachines by Use of Ultraprecision Milling MachinePrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  University of Electro-Communications
Study on the form shaping theory for machine tools and its applications
- Principal Investigator
  
  INASAKI Ichiro
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KEIO University
New Machining Methods by Means of 6-Axis Control Machining CenterPrincipal Investigator
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  The University of Electro-Communications
5軸制御マシニングセンタのための汎用ポストプロセッサの研究Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  The University of Electro-Communications
Kernel Technologies and Design Methodology for Mobile Cubic Cell of Future Manufacturing Environment
- Principal Investigator
  
  ITO Yoshimi
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Institute of Technology
干渉を考慮した5軸制御マシニングセンタの切削・研削加工と加工誤差修正Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  The University of Electro-Communications
5軸制御による加工・磨き・検査作業の高度自動化Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  The University of Electro-Communications
Development of the new technology of machining, measuring and control for advanced manufacturing system of metal molds
- Principal Investigator
  
  INASAKI Ichiro
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Faculty of Science and Technology, KEIO University
金型製作における加工・磨き・計測工程の総合化Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  The University of Electro-Communications
CADデータと画像を併用した3次元測定機の知能化Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  The University of Electro-Communications
超精密回転位置決め用回転アクチュエータの開発研究
- Principal Investigator
  
  清水弘幸
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械力学・制御工学
- Research Institution
  The University of Electro-Communications
画像処理を利用した3次元測定機の自動測定法Principal Investigator
- Principal Investigator
  
  竹内芳美
- Project Period (FY)
  1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kyushu Institute of Technology

All 2017 2016 2015 2013 2012 2011 2010 2009 2008 2006 2005 2004

All Journal Article Presentation Book

[Book] 多軸・複合加工用CAM2013
- Author(s)
  竹内芳美(単著)
- Total Pages
  327
- Publisher
  日刊工業新聞社
- Data Source
  KAKENHI-PROJECT-23360069
[Book] 多軸・複合加工用CAM2013
- Author(s)
  竹内芳美
- Total Pages
  320
- Publisher
  日刊工業新聞社
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 多軸制御超精密切削加工の高能率化に向けたセッティング誤差補正手法の開発2016
- Author(s)
  田中匠太郎, 馬場慎之佑, 中本圭一, 竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume: 8２ Pages: 758-763
- NAID
  130005253480
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H03900
[Journal Article] 把持の難しい柔軟工作物の巧妙加工2013
- Author(s)
  中本圭一、植地亮太、竹内芳美
- Journal Title
  
  日本機械学会論文集（Ｃ編）
  
  Volume: 79-808 Pages: 4535-4542
- NAID
  130003386511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 把持の難しい柔軟工作物の巧妙加工2013
- Author(s)
  中本圭一,植地亮太,竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 79巻808号 Pages: 4535-454
- NAID
  130003386511
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複数の曲がり円柱からなる複雑形状の巧妙加工2012
- Author(s)
  夏目矩行、中本圭一、石田徹、竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78巻786号 Pages: 697-706
- NAID
  130002051336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] マイクロ複雑形状の超精密巧妙加工2012
- Author(s)
  西山諒, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-792 Pages: 3085-3092
- NAID
  130002051550
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複合加工機用CAPPシステムの開発2012
- Author(s)
  濱田大地, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-791 Pages: 2698-2709
- NAID
  130002051518
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複数の曲がり円柱からなる複雑形状の巧妙加工2012
- Author(s)
  夏目矩行, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-786 Pages: 697-706
- NAID
  130002051336
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] スクエアエンドミルを用いた同時 5 軸制御加工による中仕上げ加工の高効率化2012
- Author(s)
  夏目矩行, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume: 78-793 Pages: 3305-3316
- NAID
  130005031466
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining -Formulation of Post Processor-2010
- Author(s)
  Tohru ISHIDA, Eiki ISHIGURO, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Journal Title
  
  J. of Advanced Mechanical Design, Systems, and Manufacturing Vol.4,No.4(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760085
[Journal Article] 断面変化穴放電加工用cad/camシステムの開発(2次元形状用ポストプロセッサの構築)2009
- Author(s)
  石田徹, 石黒永樹, 北正彦, 竹内芳美
- Journal Title
  
  日本機械学会論文集(c編) Vol.75,No.757
  
  Pages: 2440-2446
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760085
[Journal Article] 非回転工具を用いた自由曲面上への6軸制御超精密マイクロ溝加工2006
- Author(s)
  米山陽介, 石田徹, 河合知彦, 竹内芳美
- Journal Title
  
  精密工学会誌 72・5(印刷中)
- NAID
  110004717816
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Creation of V-Shaped Microgrooves with Two Flat-Ends by Non-Rotational Cutting Tools2005
- Author(s)
  T.Moriya, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.1st Int.Conf.on Manufacturing, Machine Design and Tribiology (CD-ROM)
  
  Pages: 1-4
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Ultraprecision Micromachining of Small Workpieces with Complicated Shape2005
- Author(s)
  Y.Takeuchi
- Journal Title
  
  Proc.of Nanoengineering Symposium 2005
  
  Pages: 129-134
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Ultraprecision Straight Microgrooving with Pattern by Means of a High Speed Shuttle Unit2005
- Author(s)
  T.Kawai, K.Ebihara, Y.Takeuchi
- Journal Title
  
  Proc.of 5th Int.Conf.of EUSPEN
  
  Pages: 607-610
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Ultraprecision Straight Microgrooving with Pattern by Means of a High Speed Shuttle Unit2005
- Author(s)
  T.Kawai, K.Ebihara, Y.Takeuchi
- Journal Title
  
  Proc.of 5th int.Conf.of EUSPEN
  
  Pages: 607-610
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Creation of V-Shaped Microgrooves with Two Flat-Ends by Non-Rotational Cutting Tools2005
- Author(s)
  T.Moriya, T.Kawai, Y.Takeuchi
- Journal Title
  
  Pro.1st Int Conf on Manufacturing, Machine Design and Tribology (CD-ROM)
  
  Pages: 1-4
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Creation of V-Shaped Microgrooves with Two Flat-Ends by Non-Rotational Cutting Tools2005
- Author(s)
  T.Moriya, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.1st Int.Conf.on Manufacturing, Machine Design and Tribology (CD-ROM)
  
  Pages: 1-4
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] 5-Axis Control Ultraprecision Micromachining of Axial-Flow Pump as a 3-D Micropart2005
- Author(s)
  N.Kitamura, Y.Tsujimoto, Y.Takeuchi, Y.Sakaida, T.Kawai
- Journal Title
  
  Proc.of ASPE2005 Annual Meeting
  
  Pages: 419-422
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Development of Tool Setting Error Compensation Method for 5-Axis Control Ultraprecision Machining2005
- Author(s)
  M.Sono, Y.Takeuchi, Y.Sakaida, T.Kawai
- Journal Title
  
  Proc.of ASPE2005 Annual Meeting, Norfolk
  
  Pages: 435-438
- NAID
  130004657156
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Development of Tool Setting Error Compensation Method for 5-Axis Control Ultraprecision Machining2005
- Author(s)
  M.Sono, Y.Takeuchi, Y.Sakaida, T.Kawai
- Journal Title
  
  Proc.of ASPE2005 Annual Meeting
  
  Pages: 435-438
- NAID
  130004657156
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] 5-Axis Control Ultraprecision Micromachining of Axial-Flow Pump as a 3-D Micropart2005
- Author(s)
  N.Kitamura, Y.Tsujimoto, Y.Takeuchi, Y.Sakaida, T.Kawai
- Journal Title
  
  Proc.of ASPE2005 Annual Meeting, Norfolk
  
  Pages: 419-422
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] 5-and 6-Axis Control Hybrid Ultraprecision Machining of 3D Microparts2004
- Author(s)
  N.Kitamura, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symposium on Nanomanufacturing
  
  Pages: 612-617
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] 6-Axis Control Ultraprecision Microgrooving on a Sculptured Surface2004
- Author(s)
  Y.Yoneyama, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symposium on Nanomanufacturing
  
  Pages: 29-34
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Ultraprecision Micromachining by Means of Non-Rotational Diamond Cutting Tools2004
- Author(s)
  Y.Takeuchi
- Journal Title
  
  Proc.8 ^<th> Int.Conf.on Mechatronics Technology
  
  Pages: 35-40
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Ultraprecision Micromachining by Means of Non-Rotational Diamond Cutting Tools2004
- Author(s)
  Y.Takeuchi
- Journal Title
  
  Proc.8^<th> Int.Conf.on Mechatronics Technology
  
  Pages: 35-40
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Microchannel Array Creation by Means of Ultraprecision Machining2004
- Author(s)
  F.Ando, A.Yamamoto, T.Kawai, H.Ohmori, T.Ishida, Y.Takeuchi
- Journal Title
  
  Proc.5^<th> Int.Conf.on Machine Automation
  
  Pages: 251-256
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Micro Sharp Corner and Character Line Creation by Means of 6-Axis Control Ultraprecision Machining2004
- Author(s)
  Y.Kikuchi, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symposium on Nanomanufacturing
  
  Pages: 606-611
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Micro Sharp Corner and Character Line Creation by Means of 6-Axis Control Ultraprecision Machining2004
- Author(s)
  Y.Kikuchi, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symp on Nanomanufacturing
  
  Pages: 606-611
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] 6-Axis Control Ultraprecision Microgrooving on a Sculptured Surface2004
- Author(s)
  Y.Yoneyama, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symp on Nanomanufacturing
  
  Pages: 29-34
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Ultraprecision Micromachining by Means of non-Rotational Diamond Cutting Tools2004
- Author(s)
  Y.Takeuchi
- Journal Title
  
  Proc.8^<th> Int.Conf.on Mechatronics Technology
  
  Pages: 35-40
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] Micro Sharp Corner and Character Line Creation by Means of 6-Axia Control Ultraprecision Machining2004
- Author(s)
  Y.Kikuchi, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symp on Nanomanufacturing
  
  Pages: 606-611
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Journal Article] 5-and 6-Axis Control Hybrid Ultraprecision Machining of 3D Microparts2004
- Author(s)
  N.Kitamura, T.Kawai, Y.Takeuchi
- Journal Title
  
  Proc.2^<nd> Int.Symp on Nanomanufacturing
  
  Pages: 612-617
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360069
[Presentation] A Study on Automatic Compensation of Workpiece Setting Errors in Ultraprecision Machining2017
- Author(s)
  R. Kitakawa, K. Nakamoto, Y. Takeuchi
- Organizer
  7th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Machining Error Estimation of Micro Complicated Shapes by On-machine Scanning Measurement2017
- Author(s)
  T. Kon, K. Nakamoto, Y. Takeuchi
- Organizer
  9th International Conference on Leading Edge Manufacturing in 21st Century
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Setting Errors Compensation of a Workpiece Located by Industrial Robots2017
- Author(s)
  K. Nakamoto, R. Kitakawa, Y. Takeuchi
- Organizer
  17th International Conference of the European Society for Precision Engineering and Nanotechnology
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] マイクロ複雑形状の多軸機上計測のためのプローブ経路生成に関する研究2017
- Author(s)
  田村拓哉, 中本圭一, 竹内芳美
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶應義塾大学（横浜市港北区）
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] 超精密機上計測を用いたセッティング誤差補正手法の開発2016
- Author(s)
  馬場慎之佑, 中本圭一, 竹内芳美
- Organizer
  日本機械学会生産システム部門研究発表講演会2016
- Place of Presentation
  東京理科大学（千葉県野田市）
- Year and Date
  2016-03-14
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] 超精密切削加工における機上計測のためのセッティング誤差の影響解析に関する研究2016
- Author(s)
  近　泰良, 田村拓哉, 中本圭一, 竹内芳美
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Place of Presentation
  名古屋大学（名古屋市千種区）
- Year and Date
  2016-10-22
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Automatic Tool Setting Errors Compensation in Ultraprecision Machining2016
- Author(s)
  K. Nakamoto, S. Baba, Y. Takeuchi
- Organizer
  16th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Nottingham, UK
- Year and Date
  2016-05-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Probe Path Generation for 5-axis Control On-machine Measurement2016
- Author(s)
  T. Tamura, K. Nakamoto, Y. Takeuchi
- Organizer
  16th International Conference on Precision Engineering
- Place of Presentation
  アクトシティ浜松（浜松市中区）
- Year and Date
  2016-11-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] マイクロ複雑形状の超精密機上計測におけるプローブ姿勢の決定に関する研究2015
- Author(s)
  田村拓哉, 馬場慎之佑, 中本圭一, 竹内芳美
- Organizer
  2015年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学（仙台市青葉区）
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Tool Setting Errors Compensation by Using an On-machine Measurement Device2015
- Author(s)
  S. Baba, K. Nakamoto, Y. Takeuchi
- Organizer
  19th International Conference on Mechatronics Technology
- Place of Presentation
  東京工業大学（東京都目黒区）
- Year and Date
  2015-11-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Decision of Probe Attitude for On-machine Measurement2015
- Author(s)
  T. Tamura, K. Nakamoto, Y. Takeuchi
- Organizer
  6th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Harbin, China
- Year and Date
  2015-08-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Development of CAPP System for Multi-tasking Machining of Complex Shapes2013
- Author(s)
  K. Nakamoto, D. Hamada, Y. Takeuchi
- Organizer
  Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Matsushima
- Year and Date
  2013-11-08
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of CAPP System for Multi-tasking Machining of Complex Shapes2013
- Author(s)
  K. Nakamoto, D. Hamada, Y. Takeuchi
- Organizer
  JSME
- Place of Presentation
  Hotel Matsushima Daikanso, Miyagi
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring2013
- Author(s)
  K. Nakamoto, R. Nishiyama, T. Ishida, Y. Takeuchi
- Organizer
  EUSPEN
- Place of Presentation
  Berlin, Germany
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring2013
- Author(s)
  K. Nakamoto, R. Nishiyama, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 13th EUSPEN Int. Conf
- Place of Presentation
  Berlin, Germany
- Year and Date
  2013-05-29
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining to Produce Highly value-added workpieces2012
- Author(s)
  Y. Takeuchi
- Organizer
  AIM-HI Symposium (ICAM2012)
- Place of Presentation
  Jiaoxi, Taiwan
- Year and Date
  2012-03-06
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of 5-axis Control CAM System for Multi-tasking Machine Tools2012
- Author(s)
  K. Nakamoto, K. Kubota, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 45st CIRP Conf. on Manufacturing Systems (CIRPCMS2012)
- Place of Presentation
  Athens, Greece
- Year and Date
  2012-05-17
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining to produce highly value-added workpieces2012
- Author(s)
  Yoshimi Takeuchi
- Organizer
  AIM-HI Symposium in ICAM2012
- Place of Presentation
  Jiaoxi, Taiwan(招待講演)
- Year and Date
  2012-03-06
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool2011
- Author(s)
  K. Nakamoto, T. Fujimoto, Y. Kawaguchi, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 15th Int. Conf. on Mechatronics Technology (ICMT2011)
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-12-01
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool2011
- Author(s)
  K.Nakamoto, T.Fujimoto, Y.Kawaguchi, T.Ishida, Y.Takeuchi
- Organizer
  Proc.of 15th Int.Conf.on Mechatronics Technology (ICMT2011)
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-11-30
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Efficient Tool Path Generation for Five-Axis Controlled Machining by Use of Square End Mill2011
- Author(s)
  N.Natsume, K.Nakamoto, Y.Takeuchi
- Organizer
  Proc.of 6th Int.Conf.on Leading Edge Manufacturing in 21st Century (LEM21), JSME
- Place of Presentation
  Saitama, Sonic city
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Basic Performance Analysis of Cooling Pipe with a Changing Cross Section2009
- Author(s)
  Seiji NAGASAWA, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Organizer
  Proc. of 5th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), Manufacturing and Machine Tool Division & Manufacturing System Division, Japan Society of Mechanical Engineers (JSME)
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-20760085
[Presentation] Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining -Formulation of Post Processor-2009
- Author(s)
  Eiki ISHIGURO, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Organizer
  Proc. of 5th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), Manufacturing and Machine Tool Division & Manufacturing System Division, Japan Society of Mechanical Engineers (JSME)
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-03
- Data Source
  KAKENHI-PROJECT-20760085
[Presentation] 断面変化穴放電加工用CAD/CAMシステムの開発-2次元形状用ポストプロセッサの構築-2008
- Author(s)
  石黒永樹, 石田徹, 北正彦, 竹内芳美
- Organizer
  (社)日本機械学会・第7回生産加工・工作機械部門講演会
- Place of Presentation
  長良川国際会議場
- Year and Date
  2008-11-21
- Data Source
  KAKENHI-PROJECT-20760085

1. ISHIDA Tohru (20313421)

# of Collaborated Projects: 8 results

# of Collaborated Products: 17 results
2. MORISHIGE Koichi (90303015)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
3. ASAKAWA Naoki (50231874)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. SAWADA Kiyoshi

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
5. NAKAMOTO Keiichi (90379339)

# of Collaborated Projects: 3 results

# of Collaborated Products: 30 results
6. 清水弘幸 (10092610)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
7. NISHIWAKI Nobuhiko (90016626)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. AOYAMA Tojiro (70129302)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. TERAMOTO Koji (40252605)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. INASAKI Ichiro (30051650)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. MITSUI Kimiyuki (90219668)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. MIYOSHI Takashi (00002048)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. SHIBATA Junji (30052822)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. ITO Yoshimi (60016441)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. CHUO Univ. Dept.of Preci (80134831)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. SAITO Yoshio (00108218)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. MORIWAKI Toshimichi (00031104)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. SUGIMURA Nobuhiro (80135813)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. KISHINAMI Takeshi (30001796)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. WARISAWA Shinichi (20262321)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. SHIRASE Keiichi (80171049)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. MITSUISHI Mamoru (90183110)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. 藤本英雄 (60024345)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. 荒井栄司 (90135814)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. 新井民夫 (40111463)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. 浅尾晃通 (80184133)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. 坂本正史 (60039089)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. 梶谷誠 (10017379)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. 笹原弘之 (00205882)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. SATO Makoto

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. 河合知彦

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results

Takeuchi Yoshimi 竹内 芳美

TAKEUCHI Yoshimi 竹内 芳美

竹内 芳美 タケウチ ヨシミ

Research Projects

Research Products

Co-Researchers

Development of an autonomous ultra-precision machine tool having functions of on-machine measurement and tool shaping

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on dexterous machining to create high value-added productsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Creation of Cross Section's Changing Holes by means of Electrical Discharge Machining Using a Tool Electrode with Posture and Position Controllable Function

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

人体血液輸送用軸流マイクロポンプの創成に関する基礎研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

自律型マイクロロボットによる小径複雑曲がり穴加工に関する基礎研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

6-Axis Control Ultraprecision Micromachining of Complex Functional DevicesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

STUDY ON MULTI-FUNCTION MACHININIG PROCESSOR CORRESPONDING TO INTELLIGENCE AND INFORMATIONPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

21世紀初頭のものづくりの学術基盤としての生産科学・技術の企画調査

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Creation of Ultraprecision Micro Parts with High Aspect Ratio and Complex Shape and its ApplicationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Accurate Machining of Difficult-to-Machine Shapes by Means of 6-Axis Control Vibrfational CuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Direct Bonding of Small Parts by Means of Ultraprecision Microgrooving TechnologyPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

3-Dimensional Microparts Machining by Ultraprecision 5-Axis control Machinig CenterPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Edged Corner Shaping and Pocket Milling by Means of 6-Axis Control MachiningPrincipal Investigator

Principal Investigator

Takeuchi Yoshimi 竹内芳美

TAKEUCHI Yoshimi 竹内芳美

竹内芳美タケウチヨシミ