• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

SATO Ryuta  佐藤 隆太

ORCIDConnect your ORCID iD *help
… Alternative Names

SATO RYUTA  佐藤 隆太

RYUTA Sato  佐藤 隆太

Less
Researcher Number 60376861
Other IDs
External Links
Affiliation (Current) 2025: 名古屋大学, 工学研究科, 特任教授
Affiliation (based on the past Project Information) *help 2022 – 2024: 名古屋大学, 工学研究科, 特任教授
2016 – 2020: 神戸大学, 工学研究科, 准教授
2014 – 2016: 神戸大学, 工学(系)研究科(研究院), 准教授
2012: 神戸大学, 大学院・工学研究科, 准教授
2012: 神戸大学, 工学(系)研究科(研究院), 准教授 … More
2011: 神戸大学, 工学(系)研究科(研究院), 助教
2008: 農工大, 助教
2007 – 2008: 東京農工大学, 大学院・共生科学技術研究院, 助教
2007: Tokyo University of Agriculture and Technology, 大学院・共生科学技術研究院, 講師
2006: Tokyo University of Agriculture and Technology, Institute of Symbiotic Science and Technology, Research Associate, 大学院共生科学技術研究院, 助手
2005: 東京農工大学, 大学院共生科学技術研究部, 助手 Less
Review Section/Research Field
Principal Investigator
Production engineering/Processing studies / Dynamics/Control / Basic Section 20010:Mechanics and mechatronics-related / Basic Section 18020:Manufacturing and production engineering-related
Except Principal Investigator
Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related
Keywords
Principal Investigator
数値制御工作機械 / 送り駆動系 / 切削加工 / NC工作機械 / 切削力 / シミュレーション / 工作機械 / 運動誤差 / 加減速指令 / 残留振動 … More / 位置決め / 非線形摩擦特性 / 動的挙動 / 連成シミュレーション / 接触剛性 / 振動特性 / 消費エネルギ / 振動 / 幾何誤差 / 国際情報交流 / 工具経路 / 加工面 / ウォームギヤ / 摩擦補償 / バックラッシ / ピッチ誤差 / 制御系設計 / 同期精度 / 運動制御 / 多軸制御工作機械 … More
Except Principal Investigator
工作機械 / エンドミル / 疲労寿命 / 機械加工 / ナノ結晶 / 表面改質 / 工具 / 切削 / 工具経路 / 5軸制御マシニング / 5軸制御マシニングセンタ / 形状創成理論 / 精度試験 / 加工試験方法 / キューブ加工 / 切削加工シミュレーション / 連成シミュレーション / エンドミル加工 / 切削力シミュレーション / Surface hardness / Surface enhancement / Nanocrystalline Structure / Functional surface / Burnishing / Friction burnishing / Tool / Cutting / あらさ / ショットピーニング / 残留応力 / 表面硬化 / 機能表面 / バニシング / 摩擦攪拌 / モニタリング / シミュレーション / 適応制御 / 自律加工 / 耐食性 / 摩擦攪拌バニシング Less
  • Research Projects

    (11 results)
  • Research Products

    (109 results)
  • Co-Researchers

    (13 People)
  •  残留振動振幅の解析に基づく画期的な位置決め指令設計方法Principal Investigator

    • Principal Investigator
      佐藤 隆太
    • Project Period (FY)
      2022 – 2024
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Review Section
      Basic Section 20010:Mechanics and mechatronics-related
    • Research Institution
      Nagoya University
  •  Proposal of Cube Machining Test Method Based on Form-Shaping-Functinon Theory for Machine Tools

    • Principal Investigator
      坂本 重彦
    • Project Period (FY)
      2022 – 2024
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Kanazawa Institute of Technology
  •  Analysis of Coupled Dynamic Behavior between Machine Tool Dynamics and Cutting ForcePrincipal Investigator

    • Principal Investigator
      SATO Ryuta
    • Project Period (FY)
      2018 – 2020
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Review Section
      Basic Section 18020:Manufacturing and production engineering-related
    • Research Institution
      Kobe University
  •  Development of virtual machining simulator for coupled simulation in variable spatial and time resolutions

    • Principal Investigator
      Shirase Keiichi
    • Project Period (FY)
      2017 – 2019
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kobe University
  •  Development of a Prediction Technology for Machined Results and Energy Consumption to Realize Advanced Virtual FactoriesPrincipal Investigator

    • Principal Investigator
      SATO RYUTA
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kobe University
  •  Milling Process Control Based on In-process Predicted and Measured Milling Forces or Torques

    • Principal Investigator
      Shirase Keiichi
    • Project Period (FY)
      2014 – 2016
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kobe University
  •  Study on ToolPath Generation Based on Motion Characteristics of Feed Drive Systems for High-precision Contour MovementsPrincipal Investigator

    • Principal Investigator
      SATO Ryuta
    • Project Period (FY)
      2011 – 2012
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Kobe University
  •  多軸制御工作機械の高性能運動制御Principal Investigator

    • Principal Investigator
      佐藤 隆太
    • Project Period (FY)
      2008
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Dynamics/Control
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Formation of Nanocrystalline Structure on the Metal Surface Layer and its Enhancement by Cutting-Frictional Stir Burnishing Combined Process

    • Principal Investigator
      SASAHARA Hiroyuki
    • Project Period (FY)
      2007 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  多軸制御工作機械の制御系設計法の開発Principal Investigator

    • Principal Investigator
      佐藤 隆太
    • Project Period (FY)
      2006 – 2007
    • Research Category
      Grant-in-Aid for Young Scientists (B)
    • Research Field
      Dynamics/Control
    • Research Institution
      Tokyo University of Agriculture and Technology
  •  Mechanically Functional Surface Generation by Cutting-FrictionStir Burnishing Combined Process

    • Principal Investigator
      SASAHARA Hiroyuki
    • Project Period (FY)
      2005 – 2006
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Production engineering/Processing studies
    • Research Institution
      Tokyo University of Agriculture and Technology

All 2024 2023 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2008 2007 2006 Other

All Journal Article Presentation Patent

  • [Journal Article] Development of contact detection method between tool cutting edge and workpiece (Influence of contact state onto vibration characteristics and contact detection during milling operation)2023

    • Author(s)
      IGARASHI Yu、SATO Ryuta、SHIRASE Keiichi
    • Journal Title

      JAMDSM

      Volume: 17 Issue: 1 Pages: JAMDSM0004-JAMDSM0004

    • DOI

      10.1299/jamdsm.2023jamdsm0004

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-23K22653
  • [Journal Article] Proposal of Sensor-Less Cutting Force Monitoring Method Based on Equivalent Cutting Force Prediction Using Real Time End Milling Simulator2020

    • Author(s)
      KANEKO Kazuki、NISHIDA Isamu、SATO Ryuta、SHIRASE Keiichi
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 86 Issue: 9 Pages: 708-713

    • DOI

      10.2493/jjspe.86.708

    • NAID

      130007897038

    • ISSN
      0912-0289, 1882-675X
    • Year and Date
      2020-09-05
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Journal Article] Time domain coupled simulation of machine tool dynamics and cutting force considering the influence of nonlinear friction characteristics and process damping2020

    • Author(s)
      Ryuta SATO, Shin NOGUCHI, Taisuke HOKAZONO, Isamu NISHIDA, Keiichi SHIRASE
    • Journal Title

      Precision Engineering

      Volume: 61 Pages: 103-109

    • DOI

      10.1016/j.precisioneng.2019.10.010

    • NAID

      120006778283

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158, KAKENHI-PROJECT-18H01350
  • [Journal Article] Influence of contact between tool and workpiece onto vibration characteristics of machine tools (Evaluation method and influence of contact length of cutting edge)2020

    • Author(s)
      HOKAZONO Taisuke、SATO Ryuta、NISHIDA Isamu、SHIRASE Keiichi
    • Journal Title

      Transactions of the JSME (in Japanese)

      Volume: 86 Issue: 892 Pages: 20-00185-20-00185

    • DOI

      10.1299/transjsme.20-00185

    • NAID

      130007961474

    • ISSN
      2187-9761
    • Language
      Japanese
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Journal Article] Machining state monitoring in end milling based on comparison of monitored and predicted cutting torques2019

    • Author(s)
      KANEKO Kazuki、NISHIDA Isamu、SATO Ryuta、SHIRASE Keiichi
    • Journal Title

      JAMDSM

      Volume: 13 Issue: 3 Pages: JAMDSM0052-JAMDSM0052

    • DOI

      10.1299/jamdsm.2019jamdsm0052

    • NAID

      130007679278

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Journal Article] Research on dynamic characteristics and reliability of a new heavy duty tractor2019

    • Author(s)
      Kazuki Kaneko, Isamu Nishida, Ryuta Sato, Keiichi Shirase
    • Journal Title

      JAMDSM

      Volume: 13 Issue: 1 Pages: JAMDSM0010-JAMDSM0010

    • DOI

      10.1299/jamdsm.2019jamdsm0010

    • NAID

      130007591407

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Journal Article] Influence of NC Program Quality and Geometric Errors of Rotary Axes on S-Shaped Machining Test Accuracy2018

    • Author(s)
      Sato Ryuta、Shirase Keiichi、Ihara Yukitoshi
    • Journal Title

      Journal of Manufacturing and Materials Processing

      Volume: 2 Issue: 2 Pages: 21-21

    • DOI

      10.3390/jmmp2020021

    • NAID

      120006777083

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] High Speed Computational Algorithm in Voxel Based Milling Process Simulation for Minute Time and Minute Space Resolution Analysis2018

    • Author(s)
      西田勇,佐藤隆太,白瀬敬一
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 84 Issue: 2 Pages: 175-181

    • DOI

      10.2493/jjspe.84.175

    • NAID

      130006337612

    • ISSN
      0912-0289, 1882-675X
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Journal Article] 工具切れ刃形状および被削材形状のボクセルモデルによるラジアスエンドミルの切削力シミュレーション2018

    • Author(s)
      西田 勇,奥村龍馬,佐藤隆太,白瀬敬一
    • Journal Title

      自動車技術会論文集

      Volume: 49 Pages: 107-111

    • NAID

      130006319630

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Journal Article] Voxel Based End-milling Simulation Considering Elastic Deflection of Tool System2018

    • Author(s)
      西田勇,奥村龍馬,佐藤隆太,白瀬敬一
    • Journal Title

      Journal of the Japan Society for Precision Engineering

      Volume: 84 Issue: 6 Pages: 572-577

    • DOI

      10.2493/jjspe.84.572

    • NAID

      130007384342

    • ISSN
      0912-0289, 1882-675X
    • Year and Date
      2018-06-05
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Journal Article] Energy Consumption of Feed Drive Systems Based on Workpiece Setting Position in Five-axis Machining Center2018

    • Author(s)
      Sato Ryuta, Shirase Keiichi, Hayashi Akio
    • Journal Title

      ASME Journal of Manufacturing Science and Engineering

      Volume: 140 Pages: 021008-021008

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] Cutting Force Simulation in Minute Time Resolution for Ball End Milling Under Various Tool Posture2018

    • Author(s)
      Isamu Nishida, Ryuma Okumura, Ryuta Sato, Keiichi Shirase
    • Journal Title

      ASME Journal of Manufacturing Science and Engineering

      Volume: 140 Pages: 1-6

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Journal Article] Geometrical Error Compensation of 5-axis Machining Centers based on On-machine Workpiece Measurement2018

    • Author(s)
      Sato Ryuta, Shirase Keiichi
    • Journal Title

      International Journal of Automation Technology

      Volume: 12 Pages: 230-237

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] Cutting Force Simulation of Corner Radius End Mill Based on Fully Voxel Representation of Cutting Edge and Instantaneous Workpiece Shape2018

    • Author(s)
      西田勇,奥村龍馬,佐藤隆太,白瀬敬一
    • Journal Title

      Transactions of Society of Automotive Engineers of Japan

      Volume: 49 Issue: 1 Pages: 107-111

    • DOI

      10.11351/jsaeronbun.49.107

    • NAID

      130006319630

    • ISSN
      0287-8321, 1883-0811
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Journal Article] Time domain coupled simulation of machine tool dynamic behaviour and cutting force based on voxel simulator of machining operation2017

    • Author(s)
      野口 晋,西田 勇,佐藤隆太,白瀬敬一
    • Journal Title

      Transactions of the JSME (in Japanese)

      Volume: 83 Issue: 856 Pages: 17-00254-17-00254

    • DOI

      10.1299/transjsme.17-00254

    • NAID

      130006282120

    • ISSN
      2187-9761
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03158, KAKENHI-PROJECT-15K05724
  • [Journal Article] Evaluation Method for Behavior of Rotary Axis around Motion Direction Changing2017

    • Author(s)
      Tadahiro NISHIGUCHI, Shogo HASEGAWA, Ryuta SATO
    • Journal Title

      International Journal of Automation Technology

      Volume: 11 Pages: 171-178

    • NAID

      130007505888

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] NC工作機械の運動誤差を考慮した加工面シミュレーション技術2017

    • Author(s)
      佐藤隆太
    • Journal Title

      精密工学会誌

      Volume: 83 Pages: 204-209

    • NAID

      130005436048

    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] 加工制約条件を考慮したエンドミル加工用工程設計支援システムの提案2017

    • Author(s)
      西田 勇,佐藤隆太,白瀬敬一
    • Journal Title

      システム制御情報学会論文誌

      Volume: 30 Pages: 81-86

    • NAID

      130006890006

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Journal Article] Analysis of the Coupled Vibration between Feed Drive Systems and Machine Tool Structure2016

    • Author(s)
      Ryuta SATO, Gen TASHIRO, Keiichi SHIRASE
    • Journal Title

      International Journal of Automation Technology

      Volume: 9 Pages: 689-697

    • NAID

      130007673889

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Journal Article] Evaluation of dynamic behavior of rotary axis in five-axis machining center (Behavior around motion direction changes)2016

    • Author(s)
      Tadahiro NISHIGUCHI, Ryuta SATO, Keiichi SHIRASE
    • Journal Title

      JAMDSM

      Volume: 10 Issue: 5 Pages: JAMDSM0075-JAMDSM0075

    • DOI

      10.1299/jamdsm.2016jamdsm0075

    • NAID

      130005266543

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] Machine Bed Support with Sliding Surface for Improving the Motion Accuracy2016

    • Author(s)
      Yusaku SHIRAHAMA, Ryuta SATO, Yusuke TAKASUKA, Hidenori NAKATSUJI, Keiichi SHIRASE
    • Journal Title

      International Journal of Automation Technology

      Volume: 10 Pages: 447-454

    • NAID

      130007673898

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] 被削材のボクセルモデルを用いたエンドミルの切削力シミュレーションと切削力の予測結果に基づく適応制御2016

    • Author(s)
      長谷川輝人,佐藤隆太,白瀬敬一
    • Journal Title

      精密工学会誌

      Volume: 82 Pages: 467-472

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Journal Article] 5軸制御マシニングセンタにおける回転軸運動方向反転時の動的挙動の評価とその補正2016

    • Author(s)
      西口直浩,佐藤隆太,白瀬敬一
    • Journal Title

      精密工学会誌

      Volume: 82 Pages: 913-918

    • NAID

      130005249086

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] Influences of geometric and dynamic synchronous errors onto machined surface in 5-axis machining center2016

    • Author(s)
      Shogo HASEGAWA, Ryuta SATO, Keiichi SHIRASE
    • Journal Title

      JAMDSM

      Volume: 10 Issue: 5 Pages: JAMDSM0071-JAMDSM0071

    • DOI

      10.1299/jamdsm.2016jamdsm0071

    • NAID

      130005266532

    • ISSN
      1881-3054
    • Language
      English
    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] エンドミル外周刃加工における数値制御工作機械駆動系の消費エネルギ2015

    • Author(s)
      林晃生,柏木洋慶,佐藤隆太,白瀬敬一
    • Journal Title

      精密工学会誌

      Volume: 81 Pages: 429-434

    • NAID

      130005066842

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Journal Article] Spindle Speed Ramp-up Test: A Novel Experimental Approach for Chatter Stability Detection2015

    • Author(s)
      Niccolo GROSSI, Antonio SCIPPA, Lorenzo SALLESE, Ryuta SATO, Gianni CAMPATTELI
    • Journal Title

      International Journal of Machine Tools and Manufacture

      Volume: 89 Pages: 221-230

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Journal Article] Analysis of the Coupled Vibration Between Feed Drive Systems and Machine Tool Structure2015

    • Author(s)
      Ryuta SATO, Gen TASHIRO, Keiichi SHIRASE
    • Journal Title

      International Journal of Automation Technology

      Volume: 9 Issue: 6 Pages: 689-697

    • DOI

      10.20965/ijat.2015.p0689

    • NAID

      130007673889

    • ISSN
      1881-7629, 1883-8022
    • Year and Date
      2015-11-05
    • Language
      English
    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Journal Article] Tool Motion Control Referring to Voxel Information of Removal Volume Voxel Model to Achieve Autonomous Milling Operation2014

    • Author(s)
      Tomokazu Kobayashi, Toshihiko Hirooka, Atsushi Hakotani, Ryuta Sato, Keiichi Shirase
    • Journal Title

      International Journal of Automation Technology

      Volume: 8 Pages: 792-800

    • NAID

      130007673895

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Journal Article] ウォームギヤと平歯車を用いた回転軸駆動機構の数学モデル2012

    • Author(s)
      佐藤隆太
    • Journal Title

      精密工学会誌

      Volume: 78 Pages: 683-688

    • NAID

      120005372378

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Development of a Feed Drive Simulator2012

    • Author(s)
      Ryuta SATO
    • Journal Title

      Key Engineering Materials

      Volume: Vol.516 Pages: 154-159

    • URL

      http://www.scientific.net/KEM.516.154

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Generation Mechanism of Quadrant Glitches and Its Compensation of Feed Drive Systems for NC Machine Tools2012

    • Author(s)
      Ryuta SATO
    • Journal Title

      International Journal of Automation Technology

      Volume: Vol.6, No.2 Pages: 154-162

    • URL

      http://www.fujipress.jp/IJAT/

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Mathematical Model of CNC Rotary Table Driven by Worm Gear2012

    • Author(s)
      Ryuta SATO
    • Journal Title

      International Journal of Intelligent Mechatronics and Robotics

      Volume: Vol.2, No.4 Pages: 27-40

    • NAID

      130005027769

    • URL

      http://www.igi-global.com/article/mathematical-model-cnc-rotary-table/74808

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Influence of Motion Error of Feed Drive Systems on Machined Surface2012

    • Author(s)
      Kentaro NISHIO, Ryuta SATOand Keiichi SHIRASE
    • Journal Title

      Journal of Advanced Mechanical Design, Systems, and Manufacturing

      Volume: Vol.6, No.6 Pages: 781-791

    • NAID

      130002099510

    • URL

      https://www.jstage.jst.go.jp/article/jamdsm/6/6/6_781/_pdf

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Mathematical Model of CNC Rotary Table Driven by Worm Gear2012

    • Author(s)
      Ryuta SAYO
    • Journal Title

      International Journal of Intelligent Mechatronics and Robotics

      Volume: 2 Pages: 27-40

    • NAID

      130005027769

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] ウォームギヤと平歯車を用いた回転軸駆動機構の数学モデル2012

    • Author(s)
      佐藤隆太,谷山裕紀,堤正臣
    • Journal Title

      精密工学会誌

      Volume: Vol.78,No.8 Pages: 683-688

    • NAID

      120005372378

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Feed Drive Simulator2011

    • Author(s)
      Ryuta SATO
    • Journal Title

      International Journal of Automation Technology

      Volume: Vol.5 Pages: 875-882

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] Dynamic Synchronous Accuracy of Translational and Rotary Axes2011

    • Author(s)
      Ryuta SATO and Masaomi TSUTSUMI
    • Journal Title

      International Journal of Mechatronics and Manufacturing Systems

      Volume: 201-219

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Journal Article] 同時多軸制御運動における旋回軸の高性能運動制御2008

    • Author(s)
      佐藤隆太, 遠藤大介, 堤正臣
    • Journal Title

      日本機械学会論文集(C編) 74巻

      Pages: 60-67

    • NAID

      110006571980

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] Generation of Surface HardenedLayer on 0.45%C Steel by Frictional Stir Burnishing2008

    • Author(s)
      Hiroyuki Sasahara, Satoshi Kiuchi,Tomohiko Yata, Hiroyuki Murase, Keisuke,Tominaga
    • Journal Title

      Proc. GCMM 2008 CD-ROM #123

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Journal Article] Generation of Surface Hardened Layer on 0.45%C Steel by Frictional Stir Burnishing2008

    • Author(s)
      Hiroyuki Sasahara, SatoshiKiuchi, Tomohiko Yata, Hiroyuki Murase, KeisukeTominaga
    • Journal Title

      Proc. GCMM 2008

      Pages: 123-123

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360060
  • [Journal Article] 微小変位領域の摩擦特性を考慮した象限突起補償器2008

    • Author(s)
      佐藤隆太, 寺島義道, 堤正臣
    • Journal Title

      精密工学会誌 74巻

      Pages: 622-626

    • NAID

      110006782718

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] 同時多軸制御運動における旋回軸の高性能運動制御2007

    • Author(s)
      遠藤大介, 佐藤隆太, 堤正臣
    • Journal Title

      2007年度精密工学会春季大会学術講演会論文集

      Pages: 135-136

    • NAID

      110006571980

    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] High Performance Motion Control of Rotary Table for 5-axis Machining Centers2007

    • Author(s)
      Ryuta SATO, Masaomi TSUTSUMI
    • Journal Title

      International Journal of Automation Technology 1巻

      Pages: 113-119

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] ウォームギヤ駆動CNC回転テーブルの運動特性2007

    • Author(s)
      吉田靖, 佐藤隆太, 堤正臣
    • Journal Title

      2007年度精密工学会春季大会学生会員卒業研究発表講演会論文集

      Pages: 15-16

    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] 直動転がり案内における摩擦特性の実験的挙動解析2007

    • Author(s)
      佐藤隆太, 堤正臣, 今木大輔
    • Journal Title

      日本機械学会論文集(C編) 73巻

      Pages: 2811-2819

    • NAID

      110006426192

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] 多軸同期制御精度向上のための送り駆動系の制御系設計方法2007

    • Author(s)
      佐藤隆太, 井出裕, 堤正臣
    • Journal Title

      日本機械学会論文集(C編) 73巻727号

      Pages: 693-700

    • NAID

      110006271387

    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] 微小変位領域の摩擦特性を考慮した象限突起補償器2007

    • Author(s)
      佐藤隆太, 寺島義道, 堤正臣
    • Journal Title

      2007年度精密工学会春季大会学術講演会論文集

      Pages: 129-130

    • NAID

      110006782718

    • Data Source
      KAKENHI-PROJECT-18760164
  • [Journal Article] 多軸制御工作機械送り駆動系の制御系設計方法2006

    • Author(s)
      佐藤隆太, 井出裕, 堤正臣
    • Journal Title

      日本機械学会第6回生産加工・工作機械部門講演会講演論文集

      Pages: 85-86

    • Data Source
      KAKENHI-PROJECT-18760164
  • [Patent] 摩擦補償方法,摩擦補償器及びモータ制御装置2007

    • Inventor(s)
      佐藤隆太, 寺鳥義道, 堤正臣
    • Industrial Property Rights Holder
      東京農工大学
    • Industrial Property Number
      2007-047874
    • Filing Date
      2007-02-27
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Presentation] 残留振動の低減と高速化のための位置決め指令設計方法の特性比較2024

    • Author(s)
      佐藤隆太,土橋由芽
    • Organizer
      2024年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-22K03982
  • [Presentation] 残留振動振幅の解析に基づく位置決め指令設計方法の基礎的検証2023

    • Author(s)
      土橋由芽,佐藤隆太
    • Organizer
      日本機械学会Dynamics & Design Conference 2023
    • Data Source
      KAKENHI-PROJECT-22K03982
  • [Presentation] Z軸反転誤差の影響を受けないキューブ加工方法2023

    • Author(s)
      佐藤隆太
    • Organizer
      精密工学会総合生産システム専門委員会 5軸工作機械の空間精度補正技術調査研究小委員会
    • Data Source
      KAKENHI-PROJECT-23K22653
  • [Presentation] Tool Path Design of Cube-machining Test to Minimize Influence of Z-axis Reversal Error Motion2023

    • Author(s)
      Ryuta SATO, Zongze LI and Shigehiko SAKAMOTO
    • Organizer
      The International Conference on Leading Edge Manufacturing/Materials & Processing (LEM&P 2023)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-23K22653
  • [Presentation] 5軸マシニングセンタの精度評価におけるキューブ加工の空間領域に関する研究2023

    • Author(s)
      土手口慎哉,坂本重彦,加藤秀治,佐藤隆太,井原之敏
    • Organizer
      2023年度精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-23K22653
  • [Presentation] 残留振動振幅の解析に基づく位置決め指令設計方法の基礎的検証2023

    • Author(s)
      土橋由芽,佐藤隆太
    • Organizer
      日本機械学会Dynamics and Design Conference 2023
    • Data Source
      KAKENHI-PROJECT-22K03982
  • [Presentation] 工具-工作物間の接触状態が工作機械の振動特性に及ぼす影響 ~接触率と固有振動数及び振動減衰性との関係~2021

    • Author(s)
      五十嵐優,外薗泰介,佐藤隆太,白瀬敬一
    • Organizer
      第28回精密工学会学生会員卒業研究発表講演会
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] Evaluation of Contacting Effect between Tool and Workpiece on Vibration Characteristics of NC Machine Tools2020

    • Author(s)
      Taisuke HOKAZONO, Ryuta SATO, Isamu NISHIDA, Keiichi SHIRASE
    • Organizer
      the JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] Real Time End Milling Simulator for Cutting Force Monitoring2020

    • Author(s)
      Kazuki KANEKO, Isamu NISHIDA, Ryuta SATO, Keiichi SHIRASE
    • Organizer
      the 18th International Conference on Precision Engineering (ICPE 2020)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] Sensor-less Tool Wear Estimation based on Change in Value of Identified Parameter in Cutting Force Prediction Model2020

    • Author(s)
      Kazuki KANEKO, Isamu NISHIDA, Ryuta SATO, Keiichi SHIRASE
    • Organizer
      the JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] 工具と工作物の接触が工作機械の振動特性におよぼす影響2019

    • Author(s)
      外薗泰介,佐藤隆太,西田 勇,白瀬敬一
    • Organizer
      日本機械学会第13回生産加工・工作機械部門講演会
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] 機台支持部の防振ゴムの特性を考慮したNC工作機械の運動シミュレーション2019

    • Author(s)
      佐藤隆太,石田昂平,白瀬敬一
    • Organizer
      日本機械学会2019年度年次大会
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] 案内面とボールねじの非線形摩擦特性を考慮したNC工作機械の振動特性シミュレーション2019

    • Author(s)
      佐藤隆太,野口晋,白瀬敬一
    • Organizer
      2019年度精密工学会春季大会学術講演会講演論文集
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] 工具と工作物の接触が工作機械の振動特性に及ぼす影響2019

    • Author(s)
      外薗泰介,佐藤隆太,西田勇,白瀬敬一
    • Organizer
      日本機械学会第13回生産加工・工作機械部門講演会
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] 機台支持部の防振ゴム特性を考慮したNC工作機械の運動シミュレーション2019

    • Author(s)
      佐藤隆太,石田昂平,白瀬敬一
    • Organizer
      日本機械学会2019年度年次大会
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] Influence of Non-linear Friction Characteristics of Linear Guide and Ball Screw in Milling Operation2019

    • Author(s)
      Ryuta SATO, Shin NOGUCHI, Isamu NISHIDA, Keiichi SHIRASE
    • Organizer
      the 8th International Conference on Virtual Machining Process Technology
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] Influence of Non-linear Friction Characteristics of linear Guide and Ball Screw in Milling Operation2019

    • Author(s)
      R. Sato, S. Noguchi, I. Nishida, K. Shirase
    • Organizer
      The 8th International Conference on Virtual Machining Process Technology
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] 案内面とボールねじの非線形摩擦特性を考慮したNC工作機械の振動特性シミュレーション2019

    • Author(s)
      佐藤隆太,野口晋,白瀬敬一
    • Organizer
      2019年精密工学会春季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] Influence of Non-linear Friction Characteristics of Linear Guide and Ball Screw in Milling Operation2019

    • Author(s)
      Ryuta SATO, Shin NOGUCHI, Isamu NISHIDA, Keiichi SHIRASE
    • Organizer
      8th International Conference on Virtual Machining Process Technology (VMPT2019)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] ボールエンドミル先端部の切削抵抗を考慮した切削力シミュレーション2018

    • Author(s)
      中村貴也,西田 勇,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会関西支部関西学生会学生員卒業研究発表講演会
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] 小形立て形マシニングセンタにおける機台支持部の防振ゴムによる振動抑制効果2018

    • Author(s)
      佐藤隆太,石田昴平,大道壮穀,白瀬敬一
    • Organizer
      日本機械学会第12回生産加工・工作機械部門講演会
    • Data Source
      KAKENHI-PROJECT-18H01350
  • [Presentation] Voxel based cutting force simulation of ball end milling considering cutting edge around ceter web2018

    • Author(s)
      Isamu Nishida, Takaya Nakamura, Ryuta Sato, Keiichi Shirase
    • Organizer
      ASME 2018 13th International Manufacturing Science and Engineering Conference
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] Cutting Force and Finish Surface Simulation of End Milling Operation in Consideration of Static Tool Deflection by Using Voxel Model2018

    • Author(s)
      Isamu Nishida, Ryuma Okumura, Ryuta Sato, Keiichi Shirase
    • Organizer
      8th CIRP Conference on High Performance Cutting
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] Coupled Simulation between Machine Tool Behavior and Cutting Force using Voxel Simulator2017

    • Author(s)
      Shin NOGUCHI, Ryuta SATO, Isamu NISHIDA, Keiichi SHIRASE
    • Organizer
      9th International Conference on Leading Edge Manufacturing in the 21st Century
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] 工具の静変形を考慮したエンドミル加工の切削加工シミュレーション2017

    • Author(s)
      奥村龍馬,西田 勇,佐藤隆太,白瀬敬一
    • Organizer
      2017年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] ボクセルモデルを用いた切削力シミュレータによる工作機械の動的挙動と切削力の時間領域連成シミュレーション2017

    • Author(s)
      野口 晋,西田 勇,佐藤隆太,白瀬敬一
    • Organizer
      2017年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] Energy Consumption of Feed-drive Systems that Depends on the Workpiece-Setting Position in a Five-axis Machining Center2017

    • Author(s)
      Sato Ryuta, Inoue Yuta, Shirase Keiichi, Hayashi Akio
    • Organizer
      ASME 2017 12th International Manufacturing Science and Engineering Conference
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] ボクセルモデルを用いた切削力シミュレータによる工作機械の動的挙動と切削力の時間領域連成シミュレーション2017

    • Author(s)
      野口晋,西田勇,佐藤隆太,白瀬敬一
    • Organizer
      017年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] Cutting force prediction of ball end milling based on fully voxel representation of cutting edge and instantaneous workpiece shape2017

    • Author(s)
      Isamu Nishida, Ryuma Okumura, Ryuta Sato, Keiichi Shirase
    • Organizer
      ASME 2017 12th International Manufacturing Science and Engineering Conference
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-17H03158
  • [Presentation] エンドミル加工における切削トルクの予測結果の定量比較に基づく加工異常検出2017

    • Author(s)
      立川宗治,西田 勇,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会生産システム部門研究発表講演会2017
    • Place of Presentation
      さいたま
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] 同時5軸制御によるS字形状加工精度-NCプログラムのトレランスと幾何誤差の影響-2017

    • Author(s)
      佐藤隆太,白瀬敬一,井原之敏
    • Organizer
      2017年度精密工学会秋季大会学術講演会
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] Coupled Simulation between Machine Tool Behavior and Cutting Force using Voxel Simulator2017

    • Author(s)
      Noguchi Shin, Sato Ryuta, Nishida Isamu, Shirase Keiichi
    • Organizer
      International Conference on Leading Edge Manufacturing in 21st Century
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] Synchronous Motion of Translational and Rotary Axes to Evaluate the Behavior of Rotary Axis2016

    • Author(s)
      Shogo HASEGAWA, Tadahiro NISHIGUCHI, Ryuta SATO, Keiichi SHIRASE
    • Organizer
      International Symposium on Flexible Automation 2016
    • Place of Presentation
      クリーブランド(アメリカ)
    • Year and Date
      2016-08-01
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] Proces Planning System of 5-axis Machining Center Considering Constraint Condition2016

    • Author(s)
      Isamu Nishida, Ryuta Sato, Keiichi Shirase
    • Organizer
      2016 International Symposium on Flexible Automation
    • Place of Presentation
      クリーブランド
    • Year and Date
      2016-08-01
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] Influence of Rubber Sheet under Machine Bed Supports of NC Machine Tools2016

    • Author(s)
      Kohei ISHIDA, Ryuta SATO, Keiichi SHIRASE
    • Organizer
      7th International Conference on Positioning Technology
    • Place of Presentation
      ソウル(韓国)
    • Year and Date
      2016-11-08
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] 工作機械駆動系と切削力の時間領域連成シミュレーション2016

    • Author(s)
      野口晋,枝川祐希,佐藤隆太,白瀬敬一
    • Organizer
      第23回精密工学会学生会員卒業研究発表講演会
    • Place of Presentation
      東京理科大学(千葉県・野田市)
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] 被削材のボクセルモデルによるボールエンドミルの工具姿勢変化を考慮した5軸加工の切削力シミュレーション2016

    • Author(s)
      西田 勇,奥村龍馬,佐藤隆太,白瀬敬一
    • Organizer
      型技術ワークショップ2016 in なにわ
    • Place of Presentation
      大阪
    • Year and Date
      2016-11-28
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] エンドミル加工における工作機械駆動系の挙動と切削力の時間領域連成シミュレーション2016

    • Author(s)
      野口 晋,西田 勇,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会第11回生産加工・工作機械部門講演会
    • Place of Presentation
      名古屋
    • Year and Date
      2016-10-22
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] 被削材のボクセル表現によるボールエンドミル加工の切削力推定2016

    • Author(s)
      奥村龍馬,西田 勇,白瀬敬一,佐藤隆太
    • Organizer
      2016年度関西地方定期学術講演会
    • Place of Presentation
      京都
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] エンドミル加工における工作機械駆動系の挙動と切削力の時間領域連成シミュレーション2016

    • Author(s)
      野口晋,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会第11回生産加工・工作機械部門講演会
    • Place of Presentation
      名古屋大学(愛知県・名古屋市)
    • Year and Date
      2016-10-22
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] 5軸制御マシニングセンタ回転軸の運動方向反転挙動の評価2016

    • Author(s)
      長谷川正悟,西口直浩,佐藤隆太,白瀬敬一
    • Organizer
      2016年度精密工学会春季大会学術講演会
    • Place of Presentation
      東京理科大学(千葉県・野田市)
    • Year and Date
      2016-03-15
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] Geometric Error Compensation of Five-axis Machining Centers based on On-machine Workpiece Measurement2016

    • Author(s)
      Ryuta SATO, Hironori KASHIWAGI, Keiichi SHIRASE
    • Organizer
      16th International Conference on Precision Engineering
    • Place of Presentation
      アクトシティ浜松(静岡県・浜松市)
    • Year and Date
      2016-11-14
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] 切削トルクの予測結果の比較に基づく加工異常検出システムの提案2016

    • Author(s)
      立川宗治,西田 勇,佐藤隆太,白瀬敬一
    • Organizer
      2016年度砥粒加工学会学術講演会
    • Place of Presentation
      姫路
    • Year and Date
      2016-08-31
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] Influences of Geometric and Dynamic Synchronous Errors onto Machined Surface in 5-axis Machining Center2015

    • Author(s)
      Shogo HASEGAWA, Ryuta SATO, Keiichi SHIRASE
    • Organizer
      the 8th International Conference on Leading Edge Manufacturing in 21st Century
    • Place of Presentation
      京都リサーチパーク(京都府・京都市)
    • Year and Date
      2015-11-18
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] エンドミル加工時の主軸モータトルクに及ぼす自励びびり振動の影響2015

    • Author(s)
      枝川祐希,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学(北海道・札幌市)
    • Year and Date
      2015-09-13
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] エンドミル加工時の主軸モータトルクに及ぼす自励びびり振動の影響2015

    • Author(s)
      枝川祐希,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学(北海道・札幌市)
    • Year and Date
      2015-09-13
    • Data Source
      KAKENHI-PROJECT-15K05724
  • [Presentation] 送り駆動系の運動誤差を考慮したボールエンドミルによる仕上げ加工面の解析2013

    • Author(s)
      佐藤友樹
    • Organizer
      第20回精密工学会学生会員卒業研究発表講演会
    • Place of Presentation
      東京
    • Year and Date
      2013-03-13
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] 送り駆動系の運動誤差が加工面に及ぼす影響2012

    • Author(s)
      佐藤隆太
    • Organizer
      日本機械学会RC249多軸多機能工作機械の先進化技術に関する研究分科会(招待講演)
    • Place of Presentation
      神戸大学
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] ボールエンドミル5軸加工による仕上げ加工面のシミュレーション2012

    • Author(s)
      佐藤友樹
    • Organizer
      2012年度精密工学会秋季大会学生研究発表会
    • Place of Presentation
      北九州
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] Influence of Motion Error of Feed Drive Systems on Machined Surface2012

    • Author(s)
      Ryuta SATO
    • Organizer
      2012 MTTRF Annual Meeting
    • Place of Presentation
      伊賀
    • Year and Date
      2012-07-25
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] Motion Control Techniques for Synchronous Motions of Translational and Rotary Axes2012

    • Author(s)
      Ryuta SATO
    • Organizer
      CIRP International Conference on High Performance Cutting 2012
    • Place of Presentation
      チューリッヒ
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] ボールエンドミル 5 軸加工による仕上げ加工面のシミュレーション2012

    • Author(s)
      佐藤友樹
    • Organizer
      2012年度精密工学会秋季大会学生研究発表会
    • Place of Presentation
      北九州
    • Year and Date
      2012-09-14
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] Influence of Motion Error of Feed Drive Systems on Machined Surface2012

    • Author(s)
      Ryuta SATO
    • Organizer
      MTTRF 2012 Annual Meeting
    • Place of Presentation
      奈良
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] Motion Control Techniques for Synchronous Motions of Translational and Rotary Axes2012

    • Author(s)
      Ryuta SATO
    • Organizer
      5th CIRP Conference on High Performance Cutting
    • Place of Presentation
      チューリッヒ(スイス)
    • Year and Date
      2012-06-05
    • Data Source
      KAKENHI-PROJECT-23760114
  • [Presentation] Motion Control Techniques of Rotary Table for 5-axis Machining Centers2007

    • Author(s)
      Ryuta SATO
    • Organizer
      The 4th International Conference on Leading Edge Manufacturing in 21st Century
    • Place of Presentation
      福岡国際会議場
    • Year and Date
      2007-11-07
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Presentation] Mathematical Model of Linear Motor Stage with Non-Linear Friction Characteristics2007

    • Author(s)
      Satoshi KANEKO
    • Organizer
      The 4th International Conference on Leading Edge Manufacturing in 21st Centtiry
    • Place of Presentation
      福岡国際会議場
    • Year and Date
      2007-11-08
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Presentation] Friction Compensator for Feed Drive Systems Consisting of Ball Screw and Linear BaU Guide2007

    • Author(s)
      Ryuta SATO
    • Organizer
      35th International MATADOR Conference
    • Place of Presentation
      台湾大学
    • Year and Date
      2007-07-18
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Presentation] CNC回転テーブルの運動特性2007

    • Author(s)
      佐藤隆太
    • Organizer
      2008年度精密工学会春季大会
    • Place of Presentation
      明治大学
    • Year and Date
      2007-03-19
    • Data Source
      KAKENHI-PROJECT-18760164
  • [Presentation] 被削材のボクセルモデルを用いたエンドミル加工の切削力シミュレーション(第2報)

    • Author(s)
      長谷川輝人,佐藤隆太,白瀬敬一
    • Organizer
      2015年度精密工学会春季大会学術講演会
    • Place of Presentation
      東洋大学(東京)
    • Year and Date
      2015-03-17 – 2015-03-19
    • Data Source
      KAKENHI-PROJECT-26289018
  • [Presentation] エンドミル加工時の主軸モータトルクに及ぼす自励びびり振動の影響

    • Author(s)
      枝川祐希,佐藤隆太,白瀬敬一
    • Organizer
      日本機械学会2015年度年次大会
    • Place of Presentation
      北海道大学(札幌)
    • Year and Date
      2015-09-14 – 2015-09-16
    • Data Source
      KAKENHI-PROJECT-26289018
  • 1.  Shirase Keiichi (80171049)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 55 results
  • 2.  西田 勇 (40776556)
    # of Collaborated Projects: 3 results
    # of Collaborated Products: 20 results
  • 3.  SASAHARA Hiroyuki (00205882)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 2 results
  • 4.  TSUTSUMI Masaomi (90108217)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  井原 之敏 (90213199)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 3 results
  • 6.  金子 順一 (80375584)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 7.  坂本 重彦 (00315285)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 8.  加藤 秀治 (90278101)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results
  • 9.  KIUCHI Satoshi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 10.  HAYASHI Akio
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 11.  NOGUCHI Shin
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 12.  NISHIGUCHI Tadahiro
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 13.  HASEGAWA Shogo
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results

URL: 

Are you sure that you want to link your ORCID iD to your KAKEN Researcher profile?
* This action can be performed only by the researcher himself/herself who is listed on the KAKEN Researcher’s page. Are you sure that this KAKEN Researcher’s page is your page?

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi