SAITO Yoshio 齋藤義夫

… Alternative Names

Researcher Number	00108218
Other IDs
Affiliation (based on the past Project Information) *help	2012: 東京工業大学, 理工学研究科, 教授 2010 – 2012: 東京工業大学, 大学院・理工学研究科, 教授 2003 – 2004: 東京工業大学, 大学院・理工学研究科, 教授 1998 – 1999: 東京工業大学, 工学部, 教授 1990 – 1995: 千葉大学, 工学部, 教授 1987 – 1989: 千葉大学, 工学部, 助教授
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / 機械工作・生産工学 / 機械工作 Except Principal Investigator 機械工作
Keywords	Principal Investigator 生産システム / 多軸制御 / 自由曲面加工 / 三次元形状計測 / 画像簡略化 / 機械工作・生産工学 / CG技術 / 知的生産システム / 学習機能 / 自律分散 … More Except Principal Investigator 生産システム / CAD / FMS / 無欠陥加工 / ダイヤモンド研削 / YAGレ-ザ加工 / 曲げ破壊強度 / 残留応力 / 硬脆材料 / セラミックス / 無欠陥加工(硬脆材料) / 微小切削(装置) / Damage-Free Processing / Diamond Grinding / YAG Laser Prosessing / Bending Strength / Residual Stress / Brittle Materials / Ceramics / 自走形Cubicセル / 設計方法論 / センサー / 熱変形抑制構造 / 生産文化 / フレキシブル生産体制 / Mobile Cubic Cell / Manufacturing systems / Design methodology / Sensor / Thermal deformation constrained structure / Culture of Manufacturing / Flexible production structure / 噴射加工 / 表面加工 / 砥粒回収方式 / 遊離砥粒 / Blasting / Surface Machining / Grit Recovery System / フレキシビル生産システム / システムのフレキシビリティ / 定量的評価方法 / 経済性評価 / フレキシビリティ / ソフトウェア / フレキシブル生産システム / システムの柔軟性 / 評価方法 / Manufacturing System / Flexibility of System / Evaluation Method / Quantitative Evaluation / Flexibility / Software / Economical Evaluation Less

Construction of Combined System of Machining and Measuring processes for Free-Form Surface of Polystyrene Foam usingsimplification procedure in CG Technology.Principal Investigator
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  2010 – 2012
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Development of 3D Digital Proto-Typing Machine Based on Multi-Axes Controlled Hot-Wire Cutting for Polystyrene FoamPrincipal Investigator
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo Institute of Technology
Construction of Single Batch Production System based on Evaluation Process for KANSEIPrincipal Investigator
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Tokyo Institute of Technology
Cooperational Control of Autonomous Intelligent Machining Cell with Machine Learning Function.Principal Investigator
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Chiba University
Kernel Technologies and Design Methodology for Mobile Cubic Cell of Future Manufacturing Environment
- Principal Investigator
  
  ITO Yoshimi
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Institute of Technology
Study on damage-free processing of brittle materials (ceramics)
- Principal Investigator
  
  YOSHIDA Yoshitaro
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Chiba University
Systematization of Evaluating FMS and Quantitative Evaluation of Its Flexibility
- Principal Investigator
  
  ITO Yoshimi
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Institute of Technology
Precision Surface Finish by New Blasting Process with Grit Recovery System
- Principal Investigator
  
  HANAOKA Tadaaki
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Chiba University
Automatic Measuring Process by Multi-level-sensing System using Optical Fibers and Artificial IntelligencePrincipal Investigator
- Principal Investigator
  
  SAITO Yoshio
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Chiba University

All 2013 2012 2011 2010 2005 2003

All Journal Article Presentation

[Journal Article] Registra- tion of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm2012
- Author(s)
  Xiaoyi Wang, Jing Chen, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka.
- Journal Title
  
  Advanced Materials Research, Trans Tech Publications
  
  Volume: Vol.472-475 Pages: 317-322
- URL
  http://www.scientific.net/AMR.472-475.317.pdf
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Generating the Measurement Points Based on Finishing NC Data2011
- Author(s)
  Asim Al-Sofi, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu
- Journal Title
  
  Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)
  
  Pages: 34-38
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool2011
- Author(s)
  Jiang Zhu, Tomohisa TANAKA, Yoshio SAITO, Ryuta TANABE, Masaaki TAKENAKA, Toru FUKAMI
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: 5巻4号 Pages: 240-251
- NAID
  130001293194
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] 3D Model Registra- tion Based on Feature Extraction2011
- Author(s)
  Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka,Yoshio Saito.
- Journal Title
  
  Advanced Materials Research, Trans Tech Publications Switzerland
  
  Volume: Vol.299-300 Pages: 1091-1094
- URL
  http://www.scientific.net/AMR.299-300.1091.pdf
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation2011
- Author(s)
  Jiang Zhu, Tomohisa Tanaka, Yoshio Saito, Lining Sun.
- Journal Title
  
  International Journal of Design Engineering, Interscience Enterprises Ltd.
  
  Volume: Vol.3,No.3 Pages: 218-231
- URL
  http://www.inderscience.com/IJDE030301
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] 3D Model Registration Based on Feature Extraction2011
- Author(s)
  Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka, Yoshio Saito
- Journal Title
  
  Advanced Materials Research
  
  Volume: 299-300 Pages: 1091-1094
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Tool Path Planning Assist System for Freeform Surface Machining2010
- Author(s)
  朱彊, 野村佳佑, 田中智久, 齋藤義夫
- Journal Title
  
  Key Engineering Materials
  
  Volume: 447-448 Pages: 321-325
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Excimer Laser 3D Machining Based on Irradiation Pulse Number Control2010
- Author(s)
  田中智久, 鈴木僚, 朱彊, 齋藤義夫
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing
  
  Volume: 4 Pages: 1033-1043
- NAID
  130000335377
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Automatic Manufacturing Feature Extraction of CAD Models for Machining2010
- Author(s)
  奈良部優介, 朱彊, 田中智久, 齋藤義夫
- Journal Title
  
  Key Engineering Materials
  
  Volume: 447-448 Pages: 287-291
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Tool Path Planning Assist System for Freeform Surface Machining2010
- Author(s)
  JIANG ZHU, Keisuke Nomura, TOMOHISA TANAKA, YOSHIO SAITO.
- Journal Title
  
  Key Engineering Materials, Trans Tech Publications
  
  Volume: Vol.447-448 Pages: 321-325
- URL
  http://www.scientific.net/KEM.447-448.321
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] Automatic Manufacturing Feature Extraction of CAD Models for Machining2010
- Author(s)
  Yuusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO.
- Journal Title
  
  Key Engineering Materials, Trans Tech Publications
  
  Volume: Vol.447-448 Pages: 287-291
- URL
  http://www.scientific.net/KEM.447-448.287
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22360058
[Journal Article] 8軸制御曲面加工システムの構築とそのプログラミング2005
- Author(s)
  杉恵貴史, 田中智久, 斎藤義夫
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 939-940
- NAID
  130004657716
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] 8軸制御局面加工システムの構築とそのプログラミング2005
- Author(s)
  杉恵貴史, 田中智久, 斎藤義夫
- Journal Title
  
  2005年度精密工学会春季大会学術講演会講演論文集
  
  Pages: 939-940
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] Construction of 8 Axes Controlled Machining System for Free Form Surface and it's Programming.2005
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Yoshio Saito
- Journal Title
  
  Proceeding of Spring Annual Meeting meeting of Japan Society for Precision Engineering
  
  Pages: 939-940
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] An Approximation of Free-Formed Surface for NC Machining2003
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito
- Journal Title
  
  International Conference on Leading Edge Manufacturing, in 21st Century
  
  Pages: 457-460
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] An Approximation of Free-Formed Surface for NC Machining2003
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito
- Journal Title
  
  International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 457-460
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Journal Article] An Approximation of Free-Formed Surface for NC Machining.2003
- Author(s)
  Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito
- Journal Title
  
  International Conference on Leading Edge Manufacturing in 21st Century
  
  Pages: 457-460
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15360067
[Presentation] 三次元形状モデルからの加工工程自動決定システムの開発2013
- Author(s)
  武藤沙織, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2013年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 多分解能メッシュによる多軸加工機の粗加工の効率化2013
- Author(s)
  長谷川将臣, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2013年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] NURBS曲面の分割による高効率加工パスの生成2013
- Author(s)
  穂積昭充, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2013年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムを用いた加工システムの構築2012
- Author(s)
  関口翔太, 朱疆, 田中智久, 齋藤義夫
- Organizer
  2012年度精密工学会春季大会学術講演会講演論文集
- Place of Presentation
  東京
- Year and Date
  2012-03-12
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムを用いた加工システムの構築2012
- Author(s)
  関口翔太,朱疆,田中智久,齋藤義夫.
- Organizer
  2012年度精密工学会春季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2012-03-16
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 多分解能メッシュによるターニングセンタの粗加工工程の検証2012
- Author(s)
  長谷川将臣,朱疆,田中智久,齋藤義夫.
- Organizer
  日本機械学会生産システム部門研究発表講演会2012講演論文集,日本機械学会
- Place of Presentation
  東京
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model2012
- Author(s)
  Jiang Zhu, Tomohisa Tanaka, Yoshio Saito.
- Organizer
  The 2nd IFToMM Asian Conference on Mechanism and Machine Science
- Place of Presentation
  Japan(Tokyo)
- Year and Date
  2012-11-08
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 多分解能メッシュによるターニングセンタの粗加工工程の検証2012
- Author(s)
  長谷川将臣, 朱疆, 田中智久, 齋藤義夫
- Organizer
  日本機械学会生産システム部門研究発表講演会2012講演論文集
- Place of Presentation
  東京
- Year and Date
  2012-03-13
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 三次元形状モデルからの加工法自動決定システムの開発2011
- Author(s)
  奈良部優介,朱疆,田中智久,齋藤義夫
- Organizer
  2011年度精密工学会春季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2011-04-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] ManufacturingFeatureExtractionSystemof3D-ModelforProcessPlanning2011
- Author(s)
  JiangZhu,YusukeNarabu,TomohisaTanaka,YoshioSaito.
- Organizer
  ProceedingofThe6thInternationalConferenceonLeadingEdgeManufacturingin21stCentury(LEM21),TheJapanSocietyofMechanicalEngineers(JSME)
- Place of Presentation
  Japan(Saitama)
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムによる三次元加工2011
- Author(s)
  関口翔太, 朱疆, 田中智久, 齋藤義夫
- Organizer
  日本機械学会2011年度年次大会講演論文集
- Place of Presentation
  東京
- Year and Date
  2011-09-11
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] RP装置による三次元形状の創成と評価2011
- Author(s)
  武藤沙織,朱疆,田中智久,齋藤義夫
- Organizer
  日本機械学会2011年度年次大会講演論文集,日本機械学会
- Place of Presentation
  東京
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 8軸冗長ロボットシステムによる三次元加工2011
- Author(s)
  関口翔太,朱疆,田中智久,齋藤義夫.
- Organizer
  日本機械学会2011年度年次大会講演論文集,日本機械学会
- Place of Presentation
  東京
- Year and Date
  2011-09-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 三次元モデルの比較による形状評価システムの構築2011
- Author(s)
  武隈裕一,朱疆,田中智久,齋藤義夫
- Organizer
  2011年度精密工学会春季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2011-04-14
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] GeneratingtheMeasurementPointsBasedonFinishingNCData2011
- Author(s)
  AsimAl-Sofi,YoshioSaito,TomohisaTanaka,JiangZhu
- Organizer
  Proceedingof2011IEEEInternationalConferenceonMechatronics(ICM)
- Place of Presentation
  Turkey(Istanbul)
- Year and Date
  2011-04-13
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] RoughMachiningToolPathGenerationforMulti-axisTurningCenterBasedonMulti-resolutionMesh2010
- Author(s)
  JiangZhu,KeisukeNomura,TomohisaTanaka,YoshioSaito
- Organizer
  Proceedingofthe14thInternationalConferenceonMechatronicsTechnology
- Place of Presentation
  Japan(Oosaka)
- Year and Date
  2010-11-24
- Data Source
  KAKENHI-PROJECT-22360058
[Presentation] 2.5軸輪郭加工に適した高効率加工パスの生成2010
- Author(s)
  西山浩司,朱疆,田中智久,齋藤義夫
- Organizer
  2010年度精密工学会秋季大会学術講演会講演論文集,精密工学会
- Place of Presentation
  東京
- Year and Date
  2010-09-29
- Data Source
  KAKENHI-PROJECT-22360058

1. TANAKA Tomohisa (70334513)

# of Collaborated Projects: 2 results

# of Collaborated Products: 34 results
2. ITO Yoshimi (60016441)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
3. ZHU Jiang (70509330)

# of Collaborated Projects: 1 results

# of Collaborated Products: 28 results
4. YOSHIDA Yoshitaro (80174960)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. WTANABE Takehiro (30009691)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. CHUO Univ. Dept.of Preci (80134831)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
7. TAKEUCHI Yoshimi (50107546)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. NISHIWAKI Nobuhiko (90016626)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
9. MORIWAKI Toshimichi (00031104)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
10. INABA Chikao (10223231)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
11. HANAOKA Tadaaki (30009229)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
12. HIGUCHI Shizuichi (50114319)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
13. FURUKAWA Yuji (10087190)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. INASAKI Ichiro (30051650)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. IWATA Kazuaki (30031066)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. AKBARI Javad (20334542)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results

SAITO Yoshio 齋藤 義夫

斉藤 義夫 サイトウ ヨシオ

SAITOH Yoshio 斎藤 義夫

Research Projects

Research Products

Co-Researchers

Construction of Combined System of Machining and Measuring processes for Free-Form Surface of Polystyrene Foam usingsimplification procedure in CG Technology.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of 3D Digital Proto-Typing Machine Based on Multi-Axes Controlled Hot-Wire Cutting for Polystyrene FoamPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Construction of Single Batch Production System based on Evaluation Process for KANSEIPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Cooperational Control of Autonomous Intelligent Machining Cell with Machine Learning Function.Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Kernel Technologies and Design Methodology for Mobile Cubic Cell of Future Manufacturing Environment

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on damage-free processing of brittle materials (ceramics)

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Systematization of Evaluating FMS and Quantitative Evaluation of Its Flexibility

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Precision Surface Finish by New Blasting Process with Grit Recovery System

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Automatic Measuring Process by Multi-level-sensing System using Optical Fibers and Artificial IntelligencePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

[Journal Article] Registra- tion of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm2012

Author(s)

Journal Title

URL

Data Source

[Journal Article] Generating the Measurement Points Based on Finishing NC Data2011

Author(s)

Journal Title

Data Source

[Journal Article] On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool2011

Author(s)

Journal Title

NAID

Data Source

[Journal Article] 3D Model Registra- tion Based on Feature Extraction2011

Author(s)

Journal Title

URL

Data Source

[Journal Article] Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation2011

SAITO Yoshio 齋藤義夫

斉藤義夫サイトウヨシオ

SAITOH Yoshio 斎藤義夫