MORIWAKI T 森脇俊道

… Alternative Names

MORIWAKI Toshimichi 森脇後道

Less

Researcher Number	00031104
Affiliation (based on the past Project Information) *help	1986 – 2005: Professor,University of Kobe, 工学部, 教授 1989: 大阪大学, 工学部, 教授 1986: Kobe University, Faculty of Engineering, Professor, 工学部, 教授
Review Section/Research Field	Principal Investigator 機械工作・生産工学 / 機械工作 / Production engineering/Processing studies Except Principal Investigator 機械工作 / 機械工作・生産工学 / Intelligent mechanics/Mechanical systems
Keywords	Principal Investigator 超精密工作機械 / Diamond tool / 超精密切削 / ダイヤモンド工具 / Walking drive / 圧電素子 / 切削力 / Elliptical vibration cutting / Walking Drive / Ultraprecision cutting … More / 超精密切削加工 / 熱変形 / 仕上げ面あらさ / CBN tool / Stainless steel / CBN工具 / ステンレス鋼 / Surface roughness / 仕上げ面粗さ / 振動切削 / 楕円振動切削加工法 / Burr / Cutting force / ばり / 楕円振動切削 / Ultraprecision positioning / ナノテクノロジー / 超精密位置決め / 精密送りテーブル / 超精密加工機 / Critical depth of cut / Tool life / Brittle materials / Ductile cutting / Ultrasonic vibration cutting / ダイヤモンド切削 / 臨界切込み量 / 工具寿命 / Intelligent control / Ultraprecision machine tool / 誤差補正 / 運動誤差 / Thermal Deformation / 加工精度 / 超精密加工 / Diamond cutting / Compensation of error / Compensation of thermal deformation / Ultra-precision tool positioning device / Ultra-precision machine tool / 微小切込み装置 / 超精密切削加工機 / 熱変形制御 / インテリジェント制御 / 超精密切込み装置 / Zirconia ceramics / Hard to machine materials / Ultra-precision machining / ジルコニアセラミックス / 難削材 / Ultra-high precision machine tool / Ultra-high precision machining / Planing / End Milling / Molds and Dies / Precision Cutting / Machining Center Spindle / Vibration Cutting / 円振動 / マシニングセンター / プレーナ加工 / エンドミル加工 / 金型 / 精密加工 / マシニングセンター主軸 / Rotating accuracy / Torque / Piezo-electric actuator / Spherical motor / 超精密回転 / 回転精度 / トルク / 球面モータ / 3 dimensional structure / Shape accuracy / Chip formation / Micro machining / 3次元複雑形状 / 形状精度 / 切りくず生成 / マイクロ加工 / Rotational Speed / Ambient Temperature / Compensation / Convolution Integral / Transfer Function / Air Spindle / Ultraprecision Machine Tool / 誤差推定 / インプロセス補正制御 / ダイヤモンド切削加工 / 周囲気温 / 超精密工作機 / 周囲温度 / たたみこみ積分 / 伝達関数 / 高精度化 / 空気静圧軸受 / Machining accuracy / Regenerative chatter vibration / Chase of resonant frequency / 切削プロセス / 周波数追尾 / びびり振動 / 切削抵抗 / 共振周波数自動追尾 / ダイヤモント工具 / XYrheta table / Microscope / Micro manufacturing / 楕円振動切削加工 / 走査型電子顕微鏡 / XYθテーブル / XYΘテーブル / 電子顕微鏡 / マイクロマニュファクチャリング / Motion acuracy / Nano technology / Precision feed device / Piezoelectric actuator / 運動精度 / Cutting mechanics / 脆性材料 / 延性モード切削 / 切削機構 / 振動切削加工法 / Steel / Ultraprecision diamond cutting / 振動切削機構 / 鋼 / 硬脆材料 / 鉄系材料 / 延性モード切削加工 / 超音波振動切削加工 / 超精密ダイヤモンド切削加工 / Error compensation / Machining errors / エキスパ-トシステム / インテリジェントコントロ-ル / 加工誤差 / 磁気軸受主軸 / Compensation Control / Estimation of Deformation / Disturbance in Environment / Ultra Precision Feed Mechanism / Ultra Precision Spindle / Ultra Precision Machine Tool / Ultra Precision Machining / 変形制御 / シミュレ-ション / 微小変形 / 補正制御 / 変形の予測 / 微小環境変化 / 精密送り機構 / 超精密主軸 / Roundness of tool edge / Crystal orientation / Rigid-plastic FEM / Single crystal metals / Ultra-precision micro cutting / 銅単結晶 / 2次元切削 / 単結晶ダイヤモンド工具 / 超微小切削 / 工具刃先丸み / シュミット因子 / 剛塑性有限要素法 / 単結晶 / 超精密超微小切削 … More Except Principal Investigator CAD / 生産システム / CIM / 知識ベース / CAM / 自律分散 / Knowledge Representation / 知識表現 / Knowledge Base / エキスパートシステム / Piezoelectric actuator / XYθテーブル / 圧電素子 / シミュレーション / エンドミル加工 / Intelligent / Manufacturing System / 知能化 / 走査型電子顕微鏡 / 2次元切削 / 切削機構 / Determination of Assembly Sequence / Assembly Process Planning / Machining Process Planning / 生産工程設計 / 解析用知識 / 組立順序の決定 / 組立順序の設計 / 知識ベ-ス / 組立工程設計 / 加工工程設計 / expert system / design aid / product model / manufacturing system / CAPP / インテリジェントシステム / 人工知能 / CIMシステム / エキスパ-トシステム / 設計・支援 / プロダクト・モデル / Knowledge Acqisition / Manufacturing Systems / 知識ベース生産システム / 組立工程 / 金型加工 / ノウハウ / 経験則 / 知識獲得 / sintered nylon / piezo-electric actuater / linear motor / resin concrete / ceramics / new material / 異方性エッチング / 送り機構 / セラミクス / ナイロン焼接体 / 超精密 / 電歪素子 / リニアモータ / レジンコンクリート / セラミックス / 新素材 / Rigid-plastic finite / Diamond cutting tool / Orthogonal cutting / Scanning Electron Microscope / Cutting process / Ultra-precision machining / 弾塑性有限要素法 / 超微小切込 / 微小切削速度 / 剛塑性有限要素法 / 天然ダイヤモンド工具 / 微小切込み / 走査型電子顕微鏡(SEM) / 超精密切削 / Basic Layout Design Part Drawing / Expert System / CAM Interface / Machine Tool / 設計者の思考形態 / 部品図作成 / 基本計画図 / CAMインターフェース / 工作機械 / Vacuum / Positioning device / Xyθ table / Semiconductor production equipment / Ultraprecision alignment table / 真空 / 位置決め装置 / 半導体製造装置 / 超精密アライメント装置 / Adaptive Control / Intelligent Monitoring / Digital Copy Milling / Autonomous Machining / Intelligent Machine Tool / NC Machine Tool / 知能型・自律型NC工作機械 / 自律型・知能型NC工作機械 / モニタリング / 作業設計 / 切削加工シミュレータ / 自律型・知能型工作機械 / 自律加工 / NC工作機械 / Dual mode driving system / Fine positioning resolution / High rigidity / Feed device / XYθ table / Ultraprecision positioning / Walking drive / デュアルモード駆動システム / 高分解能 / 高剛性 / 送り装置 / 超精密位置決め / Walking Drive / Coordination / Distributed / Autonomous / Control structure / Architecture / New generation / Manufacturing system / インテリジェントジグ / インテリジェント工作機械 / 生物型システム / 協調 / 分散 / 自律 / 制御形態 / アーキテクチャ / 次世代 / Object Oriented / Scheduling / Simulation / Autonomous Distributed / オブジェクト指向モデル / スケジューリング / design of accuracy / mathematical model / shape generation process / precision machining / Precision machining system / 同時制御加工 / 形状創成モデル / 精度設計 / 数学モデル / 形状創成過程 / 精密加工 / 機械加工システム / Flexible production structure / Culture of Manufacturing / Thermal deformation constrained structure / Sensor / Design methodology / Manufacturing systems / Mobile Cubic Cell / フレキシブル生産体制 / 生産文化 / 熱変形抑制構造 / センサー / 設計方法論 / 自走形Cubicセル / Rule-based System / Model of Machining Errors / Design for Accuracy / Machine Tools / Distributed System / 意思決定構造 / 構造設計 / ル-ルベ-スシステム / 加工誤差モデル / 誤差設計 / 加工用機械 / Surface Finish / Cutting Forces / Cutting Mechanics / Single Crystal Metals / FRM / Micro Machining / Ultra Precision Machining / 複合材 / 難削材 / 超精密微小切削 / 仕上げ面性状 / 切削力 / 単結晶金属 / 繊維強化金属 / 超微小切込み / 超精密加工 / manufacturing process / Geometric model / Recongnition / Factory model / Computer model / Cominucation / Product model / Distributed automated manufacturing / 生産情報のコミュニケ-ション / CAD@CAM / 生産情報のコミニュケ-ション / 生産プロセスの分散管理 / 加工環境の認識 / 知的モデル / セル・コントロ-ラ / 生産情報の誘発機構 / 自律分散生産システム / 生産プロセス / 形状認識 / 加工環境認識 / ファクトリモデル / 計算機モデル / コミニュケーション / 製品モデル / 自律分散生産システム Less

Development of Machining Center Spindle for Realizing Elliptical Vibration CuttingPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Development of 3 DOF Spherical Motor by Means of Walking DrivePrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Advanced Machine Tool to Realize Autonomous Machining Operation Unconstrained by NC program
- Principal Investigator
  
  SHIRASE Keiichi
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
  Osaka University
DEVELOPMENT OF ULTRAPRECISION ALIGNMENT TABLE BY MEANS OF WALKING DRIVE
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  NAGOYA UNIVERSITY
  Kobe University
ULTRAPRECISION MACHINING OF 3 DIMENSIONAL MICRO STRUCTURES BY APPLYING ELLIPTICAL VIBRATION CUTTINGPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  KOBE UNIVERSITY
Study on Compensation Control of Thermal deformation of Ultraprecision Machine ToolPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Ultraprecision High Speed XYθ Table Driven by Means of Walking Drive
- Principal Investigator
  
  SHAMOTO Eiji
- Project Period (FY)
  1998 – 1999
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Ultraprecision Elliptical Vibration Cutting MachinePrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
A Study on Architecture and Control of Next Generation Manufacturing Systems
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Intelligent mechanics/Mechanical systems
- Research Institution
  College of Eng., Osaka Prefecture University
Study on Micro-Manufactring within Scanning Electron MicroscopePrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Development of Simultaneous 3-axis control ultraprecision machine tool based on principle of Walking DrivePrincipal Investigator
- Principal Investigator
  
  MORIWAKI T
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
A Study on Design and Management of Autonomous Distributed Manufacturing System
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1994 – 1995
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作・生産工学
- Research Institution
  University of Osaka Prefecture
Ductile Cutting of brittle materials by Applying Ultrasonic VibrationPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimchi
- Project Period (FY)
  1993 – 1994
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作・生産工学
- Research Institution
  Kobe University
Kernel Technologies and Design Methodology for Mobile Cubic Cell of Future Manufacturing Environment
- Principal Investigator
  
  ITO Yoshimi
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Institute of Technology
A study on design method of accuracy for precision machining system based on mathematical model
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1992 – 1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Ultraprecision Diamond Cutting of steel by Applying Ultrasonic VibrationPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimiti
- Project Period (FY)
  1991 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Simulation and Control of Deformations for Next Generation of Ultra Precision Machine ToolsPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Development of Ultraprecision Intelligent Machine ToolPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Design System of Machine Tool Structures Suitable for Autonomous Distributed Manufacturing Systems
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Intelligent Model and Communication for Distributed Automated Manufacturing System
- Principal Investigator
  
  KISHINAMI Takeshi
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Hokkaido University
Study on Ultra-Precision Micro Diamond CuttingPrincipal Investigator
- Principal Investigator
  
  MORIWAKI. T
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Ultra Precision Machining of Hard to Cut Materials and Composite Materials
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1989 – 1990
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research (B).
- Research Field
  
  機械工作
- Research Institution
  Kobe University
A Study on Intelligent CIM Systems
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (A)
- Research Field
  
  機械工作
- Research Institution
  Osaka University, Faculty of Engineering
  Kobe University
A Study on Knowledge Based Machining and Assembly Process Planning
- Principal Investigator
  
  SUGIMURA Nobuhiro
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  機械工作
- Research Institution
  Kobe Univ., Faculty of Engg.
Development of Ultra-Precision Intelligent Machining Control SystemPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  機械工作
- Research Institution
  Kobe University
A Study on Knowledge Acquisition and Knowledge Representation in Manufacturing
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Kobe Univ., Faculty of Engg.
Study on Ultra-Precision Machining of Hard to Machine MaterialsPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1987 – 1988
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Application of New Materials to Designing of "Nano-mechanism"
- Principal Investigator
  
  FURUKAWA Yuji
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Metropolitan University
Incorporation of Knowledge Data Base in CAD System of Machine Tool
- Principal Investigator
  
  ITO Yoshimi
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  機械工作
- Research Institution
  Tokyo Institute of Technology
Research on Ultra-high Precision High Speed Machining of SteelPrincipal Investigator
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  機械工作
- Research Institution
  Kobe University
Development of ultra-precision orthogonal cutting machine for investigation of micro-cutting process.
- Principal Investigator
  
  IWATA Kazuaki
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  機械工作
- Research Institution
  Kobe University

All 2005 2004

All Journal Article Patent

[Journal Article] Development of Circular Vibration Milling Attachment2005
- Author(s)
  N.Hettiarachchi, T.Moriwaki, K.Nakamoto, H.Saraie, A.Mochizuki
- Journal Title
  
  Proc.of the Int.Conf.on Leading Edge Manufacturing in 21^<st> Century
  
  Pages: 443-448
- Data Source
  KAKENHI-PROJECT-16360071
[Journal Article] Development of a Circular Vibration Milling Attachment2005
- Author(s)
  N.HETTIARACHCHI, T.MORIWAKI, K.NAKAMOTO, H SARAIE, A.MOCHIZUKI
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
  
  Pages: 443-448
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360071
[Journal Article] Development of Elliptical Vibration Milling Machine2004
- Author(s)
  Toshimichi MORIWAKI
- Journal Title
  
  Annals of the CIRP 53・1
  
  Pages: 341-344
- Data Source
  KAKENHI-PROJECT-16360071
[Patent] 振動切削ユニット2004
- Inventor(s)
  森脇俊道, H.Nandita
- Industrial Property Rights Holder
  財団法人新産業創造研究機構
- Industrial Property Number
  2004-281892
- Filing Date
  2004-09-28
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-16360071
[Patent] 振動切削ユニット2004
- Inventor(s)
  森脇俊道, へティアーラッチナンディタ
- Industrial Property Rights Holder
  神戸大学
- Industrial Property Number
  2004-281892
- Filing Date
  2004-09-28
- Data Source
  KAKENHI-PROJECT-16360071
[Patent] 振動切削ユニット2004
- Inventor(s)
  森脇俊道
- Industrial Property Rights Holder
  神戸大学
- Industrial Property Number
  2004-281892
- Filing Date
  2004-09-28
- Data Source
  KAKENHI-PROJECT-16360071

1. SHAMOTO E (20216146)

# of Collaborated Projects: 15 results

# of Collaborated Products: 0 results
2. SUGIMURA N (80135813)

# of Collaborated Projects: 15 results

# of Collaborated Products: 0 results
3. IWATA Kazuaki (30031066)

# of Collaborated Projects: 11 results

# of Collaborated Products: 0 results
4. HINO Rei (80273762)

# of Collaborated Projects: 7 results

# of Collaborated Products: 0 results
5. SHIBASAKA Toshiro (80094530)

# of Collaborated Projects: 6 results

# of Collaborated Products: 0 results
6. ITO Y (60016441)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
7. FURUKAWA F (10087190)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
8. OKUDA K (50124061)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. OISHI Susumu (70094258)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. KISHINAMI Takeshi (30001796)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. MANABE Keiji (90209677)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. TANI Yasuhiro (80143527)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. TSUTSUMI Masaomi (90108217)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
14. SUZUKI Hirofumi (20282098)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
15. YOSHIDA Yoshitaro (80174960)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
16. ONOSATO Masahiko (80177279)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
17. 幸田盛堂

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
18. SUZUKI H (40187761)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. SANAI S (90194878)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. IKAI Y (40031108)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. TOMITA Y (10031147)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. HIGUCHI Toshiro (10111569)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. CHUO Univ. Dept.of Preci (80134831)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. SAITO Yoshio (00108218)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. TAKEUCHI Yoshimi (50107546)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. NISHIWAKI Nobuhiko (90016626)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. YOKOYAMA K (00018673)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. SUGIMOTO Masakatsu (70081239)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. NAKAI Yoshikazu (90155656)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. UEDA Kanji (50031133)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. INASAKI Ichiro (30051650)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. FUJII Yoshikazu (80238534)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. SHIRASE Keiichi (80171049)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. ARAI Eiji (90135814)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. WAKAMATSU Hidefumi (60273603)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. NAKAMOTO Takeshi (30198262)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. NAKAMOTO Keiichi (90379339)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
38. NAGAMATU Akio (70016640)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. MORONUKI Nobuyuki (90166463)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
40. SAITO Katsumasa (40001169)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
41. 村田英人 (10031080)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
42. 金田悠紀夫 (80107979)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
43. 松井進 (00031112)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
44. OTA Masato

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
45. TANIMIZU Yoshitaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
46. TANAKA Katsutoshi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
47. UDA Yutaka

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
48. YAMAUCHI Akira

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
49. IBA Goji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
50. 和田龍児

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
51. WADA R

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

MORIWAKI T 森脇 俊道

MORIWAKI Toshimichi 森脇 後道

Research Projects

Research Products

Co-Researchers

Development of Machining Center Spindle for Realizing Elliptical Vibration CuttingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of 3 DOF Spherical Motor by Means of Walking DrivePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ULTRAPRECISION MACHINING OF 3 DIMENSIONAL MICRO STRUCTURES BY APPLYING ELLIPTICAL VIBRATION CUTTINGPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Compensation Control of Thermal deformation of Ultraprecision Machine ToolPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Ultraprecision Elliptical Vibration Cutting MachinePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on Micro-Manufactring within Scanning Electron MicroscopePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of Simultaneous 3-axis control ultraprecision machine tool based on principle of Walking DrivePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ductile Cutting of brittle materials by Applying Ultrasonic VibrationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

MORIWAKI T 森脇俊道

MORIWAKI Toshimichi 森脇後道