NAKAMOTO Keiichi 中本圭一

Researcher Number	90379339
Affiliation *help	2012 – 2018 : 東京農工大学, 工学(系)研究科(研究院), 准教授 2015 : 東京農工大学, 大学院工学研究院, 准教授 2013 : 東京農工大学, 工学研究科, 准教授 2012 : 東京農工大学, 大学院・工学研究院, 准教授 2011 : 大阪大学, 大学院・工学研究科, 招聘准教授 … More
Review Section/Research Field	Principal Investigator Production engineering/Processing studies / Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields Except Principal Investigator Production engineering/Processing studies
Keywords	Principal Investigator 機械工作・生産工学 / 精密部品加工 / 切削加工 / 工程設計 / パラレルメカニズム形工作機械 / 超精密計測 / マイクロ・ナノデバイス / CAM / 複合加工機 / トポロジー最適化 … More Except Principal Investigator CAM / CAD / 仕上げ面粗さ / 機械工作・生産工学 / Voxel model / 研削温度 / 単結晶ダイヤモンド / リアクティブスケジューリング / 超精密マイクロ加工 / 位置姿勢制御電極 / マシニングセンター / 超高速スピンドル / 複合加工機 / 精密加工 / CAE / フライス加工 / 円振動 / 切削力 / 研削加工 / アーク放電 / 高付加価値製品 / 工具摩耗 / 研削油剤 / 仕上げ面精度 / 精度 / ＣＡＭ / 金型 / Molds and Dies / Milling simulation / 難把持形状 / NCプロセッサ / Planing / 旋削加工 / Precision Cutting / 放電加工 / Intelligent machine tool / エンドミル加工 / エンドミル工具 / 巧妙加工 / マイクロ金型 / Milling process model / プレーナ加工 / フライカット / 金型鋼 / アディティブ・マニュファクチャリング / 知能機械 / 表面粗さ / エンドミル / 断面変化穴 / 砥石 / Vibration Cutting / 切削シミュレーション / 加工プロセスモデル / 振動切削 / 機械加工・生産工学 / NC processor / 超精密切削 / 楕円振動切削 / ボクセルモデル / マシニングセンター主軸 / Reactive scheduling / Machining Center Spindle / モニタリング / 複雑形状 / 柔軟材 / End Milling / 超精密加工 Less

テクスチャ付き自由曲面金型の非加工時間短縮に向けた超精密切削加工システムの開発Principal InvestigatorOngoing
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2018 – 2020
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Tokyo University of Agriculture and Technology
工作物のトポロジー最適化に基づいた切削加工の工程設計に関わる技能の体系化Principal InvestigatorOngoing
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2018 – 2019
- Research Category
  
  Challenging Research (Exploratory)
- Review Section
  
  Medium-sized Section 18:Mechanics of materials, production engineering, design engineering, and related fields
- Research Institution
  Tokyo University of Agriculture and Technology
複雑3次元形状のナノ切削を導く加工シミュレータの構築と微小径工具の機上成形（国際共同研究強化）Principal InvestigatorOngoing
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2017 – 2019
- Research Category
  
  Fund for the Promotion of Joint International Research (Fostering Joint International Research)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
ワイヤー＋アーク放電方式による金属材料の付加加工における形状精度と健全性Ongoing
- Principal Investigator
  
  笹原弘之
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
機上計測と工具の機上成形機能を兼ね備えた超精密自律型工作機械の開発Principal InvestigatorOngoing
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2015 – 2017
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Dexterous machining of soft objects by employing an aqueous solution of sodium acetatePrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2014 – 2015
- Research Category
  
  Grant-in-Aid for Challenging Exploratory Research
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Study on the optimization of grinding point environment by a direct supply of grinding fluid from inner side of the grinding wheel
- Principal Investigator
  
  Sasahara Hiroyuki
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
Study on dexterous machining to create high value-added products
- Principal Investigator
  
  TAKEUCHI Yoshimi
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Chubu University
Development of CAPP System for Multi-tasking Machining by using the physical model of machine toolsPrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2011 – 2012
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Tokyo University of Agriculture and Technology
  Osaka University
Creation of Cross Section's Changing Holes by means of Electrical Discharge Machining Using a Tool Electrode with Posture and Position Controllable Function
- Principal Investigator
  
  ISHIDA Tohru
- Project Period (FY)
  2008 – 2009
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
Ultra Precision Cutting of Steel with Single Crystal Diamond Tool
- Principal Investigator
  
  SHIBASAKA Toshirou
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Development of a Support System of Process Planning for Multi-Axis Controlled Machine ToolsPrincipal Investigator
- Principal Investigator
  
  NAKAMOTO Keiichi
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Osaka University
PKM形工作機械による自由曲面形状の高速・高精度加工に関する研究Principal Investigator
- Principal Investigator
  
  中本圭一
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Young Scientists (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Study on smint NC processor which includes milling process model for process prediction to buill the next generation of machine tools
- Principal Investigator
  
  SHIRASE Keiichi
- Project Period (FY)
  2005 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University
Development of Machining Center Spindle for Realizing Elliptical Vibration Cutting
- Principal Investigator
  
  MORIWAKI Toshimichi
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Production engineering/Processing studies
- Research Institution
  Kobe University

All 2017 2016 2015 2013 2012 2011 2010 2009 2008 2007 2006 2005

All Journal Article Presentation

[Journal Article] Dexterous Creation of Soccer-Ball Pattern by Using Urethane Rubber2016
- Author(s)
  K. Funatani, K. Nakamoto, A. Beaucamp, Y. Takeuchi
- Journal Title
  
  International Journal of Automation Technology
  
  Volume : 10 Pages : 239-243
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-26630022
[Journal Article] 多軸制御超精密切削加工の高能率化に向けたセッティング誤差補正手法の開発2016
- Author(s)
  田中匠太郎, 馬場慎之佑, 中本圭一, 竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume : 8２ Pages : 758-763
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-15H03900
[Journal Article] Dexterous Machining of Soft Objects by Means of Flexible Clamper2015
- Author(s)
  K. Nakamoto, T. Iizuka, Y. Takeuchi
- Journal Title
  
  International Journal of Automation Technology
  
  Volume : 9 Pages : 83-88
- Peer Reviewed / Open Access / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-26630022
[Journal Article] 把持の難しい柔軟工作物の巧妙加工2013
- Author(s)
  中本圭一、植地亮太、竹内芳美
- Journal Title
  
  日本機械学会論文集（Ｃ編）
  
  Volume : 79-808 Pages : 4535-4542
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 把持の難しい柔軟工作物の巧妙加工2013
- Author(s)
  中本圭一,植地亮太,竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 79巻808号 Pages : 4535-454
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 超精密マイクロ加工のためのCAMシステムに関する研究-高アスペクト比形状の5軸加工に対応した工程設計-2012
- Author(s)
  小山泰明,中本圭一,竹内芳美
- Journal Title
  
  精密工学会誌
  
  Volume : 78巻,10号 Pages : 912-917
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760113
[Journal Article] 複数の曲がり円柱からなる複雑形状の巧妙加工2012
- Author(s)
  夏目矩行、中本圭一、石田徹、竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 78巻786号 Pages : 697-706
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複合加工機用CAPPシステムの開発2012
- Author(s)
  濱田大地, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 78-791 Pages : 2698-2709
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] マイクロ複雑形状の超精密巧妙加工2012
- Author(s)
  西山諒, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 78-792 Pages : 3085-3092
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複数の曲がり円柱からなる複雑形状の巧妙加工2012
- Author(s)
  夏目矩行, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 78-786 Pages : 697-706
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] 複合加工機用CAPPシステムの開発2012
- Author(s)
  濱田大地,中本圭一,石田徹,竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 78巻,791号 Pages : 2698-2709
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23760113
[Journal Article] スクエアエンドミルを用いた同時 5 軸制御加工による中仕上げ加工の高効率化2012
- Author(s)
  夏目矩行, 中本圭一, 石田徹, 竹内芳美
- Journal Title
  
  日本機械学会論文集(C編)
  
  Volume : 78-793 Pages : 3305-3316
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-23360069
[Journal Article] Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining -Formulation of Post Processor-2010
- Author(s)
  Tohru ISHIDA, Eiki ISHIGURO, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Journal Title
  
  J. of Advanced Mechanical Design, Systems, and Manufacturing Vol.4,No.4(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20760085
[Journal Article] Rapid Removal Volume Acquisition for Tool Posture Decision in 3+2-Axis Control Milling2008
- Author(s)
  中本圭一
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.2
  
  Pages : 464-473
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760088
[Journal Article] Rapid Removal Volume Acquisition for Tool Posture Decision in 3+2-Axis Control Milling2008
- Author(s)
  K. NAKAMOTO, M. TSUNODA, K. SHIRASE, T. MORIWAKI
- Journal Title
  
  Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.2, No.4
  
  Pages : 464-473
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19760088
[Journal Article] 5軸制御工作機械のための工程設計支援システムの開発(第1報) -ボクセルモデルを利用した除去領域の算出と工具経路の生成による工具姿勢の決定-2007
- Author(s)
  中本圭一, 稲岡孝彬, 白瀬敬一, 森脇俊道
- Journal Title
  
  精密工学会誌 73巻9号
  
  Pages : 1019-1024
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17360063
[Journal Article] 5軸制御工作機械のための工程設計支援システムの開発(第1報)-ボクセルモデルを利用した除去領域の算出と工具経路の生成による工具姿勢の決定-2007
- Author(s)
  中本圭一, 稲岡孝彬, 白瀬敬一, 森脇俊道
- Journal Title
  
  精密工学会誌 73巻9号
  
  Pages : 1019-1024
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-17360063
[Journal Article] Development of a Process planning System for 5-axis Controlled Machine tool(1st Report)(in Japanese)2007
- Author(s)
  K. Nakamoto, T. Inaoka, K. Shirase, T. Moriwaki
- Journal Title
  
  Journal of the Japan Society for Precision Engineering Vol. 73 No. 9
  
  Pages : 1091-1024
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Journal Article] Development of Circular Vibration Milling Attachment2005
- Author(s)
  N.Hettiarachchi, T.Moriwaki, K.Nakamoto, H.Saraie, A.Mochizuki
- Journal Title
  
  Proc.of the Int.Conf.on Leading Edge Manufacturing in 21^<st> Century
  
  Pages : 443-448
- Data Source
  KAKENHI-PROJECT-16360071
[Journal Article] Development of a Circular Vibration Milling Attachment2005
- Author(s)
  N.HETTIARACHCHI, T.MORIWAKI, K.NAKAMOTO, H SARAIE, A.MOCHIZUKI
- Journal Title
  
  Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
  
  Pages : 443-448
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-16360071
[Presentation] マイクロ複雑形状の多軸機上計測のためのプローブ経路生成に関する研究2017
- Author(s)
  田村拓哉, 中本圭一, 竹内芳美
- Organizer
  2017年度精密工学会春季大会学術講演会
- Place of Presentation
  慶應義塾大学（横浜市港北区）
- Year and Date
  2017-03-13
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] 超精密切削加工における機上計測のためのセッティング誤差の影響解析に関する研究2016
- Author(s)
  近　泰良, 田村拓哉, 中本圭一, 竹内芳美
- Organizer
  日本機械学会第11回生産加工・工作機械部門講演会
- Place of Presentation
  名古屋大学（名古屋市千種区）
- Year and Date
  2016-10-22
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] 超精密機上計測を用いたセッティング誤差補正手法の開発2016
- Author(s)
  馬場慎之佑, 中本圭一, 竹内芳美
- Organizer
  日本機械学会生産システム部門研究発表講演会2016
- Place of Presentation
  東京理科大学（千葉県野田市）
- Year and Date
  2016-03-14
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Automatic Tool Setting Errors Compensation in Ultraprecision Machining2016
- Author(s)
  K. Nakamoto, S. Baba, Y. Takeuchi
- Organizer
  16th International Conference of the European Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Nottingham, UK
- Year and Date
  2016-05-30
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Probe Path Generation for 5-axis Control On-machine Measurement2016
- Author(s)
  T. Tamura, K. Nakamoto, Y. Takeuchi
- Organizer
  16th International Conference on Precision Engineering
- Place of Presentation
  アクトシティ浜松（浜松市中区）
- Year and Date
  2016-11-14
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Tool Setting Errors Compensation by Using an On-machine Measurement Device2015
- Author(s)
  S. Baba, K. Nakamoto, Y. Takeuchi
- Organizer
  19th International Conference on Mechatronics Technology
- Place of Presentation
  東京工業大学（東京都目黒区）
- Year and Date
  2015-11-27
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] A Study on Decision of Probe Attitude for On-machine Measurement2015
- Author(s)
  T. Tamura, K. Nakamoto, Y. Takeuchi
- Organizer
  6th International Conference of Asian Society for Precision Engineering and Nanotechnology
- Place of Presentation
  Harbin, China
- Year and Date
  2015-08-15
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] マイクロ複雑形状の超精密機上計測におけるプローブ姿勢の決定に関する研究2015
- Author(s)
  田村拓哉, 馬場慎之佑, 中本圭一, 竹内芳美
- Organizer
  2015年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学（仙台市青葉区）
- Year and Date
  2015-09-04
- Data Source
  KAKENHI-PROJECT-15H03900
[Presentation] Development of CAPP System for Multi-tasking Machining of Complex Shapes2013
- Author(s)
  K. Nakamoto, D. Hamada, Y. Takeuchi
- Organizer
  JSME
- Place of Presentation
  Hotel Matsushima Daikanso, Miyagi
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Ultraprecision Cutting of SiC by Rotational Diamond Tool with Special Chamfer2013
- Author(s)
  Toan Vu Van, K. Nakamoto, Xinrui Tang
- Organizer
  ASPEN
- Place of Presentation
  Taipei, Taiwan
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring2013
- Author(s)
  K. Nakamoto, R. Nishiyama, T. Ishida, Y. Takeuchi
- Organizer
  EUSPEN
- Place of Presentation
  Berlin, Germany
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 5-Axis Control Ultraprecision Dexterous Micromachining of Möbius Ring2013
- Author(s)
  K. Nakamoto, R. Nishiyama, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 13th EUSPEN Int. Conf
- Place of Presentation
  Berlin, Germany
- Year and Date
  2013-05-29
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of CAPP System for Multi-tasking Machining of Complex Shapes2013
- Author(s)
  K. Nakamoto, D. Hamada, Y. Takeuchi
- Organizer
  Proc. of 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Matsushima
- Year and Date
  2013-11-08
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of 5-axis Control CAM System for Multi-tasking Machine Tools2012
- Author(s)
  K. Nakamoto, K. Kubota, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 45st CIRP Conf. on Manufacturing Systems (CIRPCMS2012)
- Place of Presentation
  Athens, Greece
- Year and Date
  2012-05-17
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] 柔軟工作物の巧妙加工に関する研究2012
- Author(s)
  中本圭一
- Organizer
  日本機械学会第9回生産加工・工作機械部門講演会
- Place of Presentation
  秋田県立大学
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Development of 5-axis Control CAM System for Multi-tasking Machine Tools2012
- Author(s)
  Keiichi Nakamoto
- Organizer
  Proc. of 45st CIRP Conf. on Manufacturing Systems (CIRP-CMS2012)
- Place of Presentation
  Athens, Greece
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool2011
- Author(s)
  K.Nakamoto, T.Fujimoto, Y.Kawaguchi, T.Ishida, Y.Takeuchi
- Organizer
  Proc.of 15th Int.Conf.on Mechatronics Technology (ICMT2011)
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-11-30
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Efficient Tool Path Generation for Five-Axis Controlled Machining by Use of Square End Mill2011
- Author(s)
  N.Natsume, K.Nakamoto, Y.Takeuchi
- Organizer
  Proc.of 6th Int.Conf.on Leading Edge Manufacturing in 21st Century (LEM21), JSME
- Place of Presentation
  Saitama, Sonic city
- Year and Date
  2011-11-08
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Dexterous Machining of Chain-Shapes by Employing a Multi-Tasking Machine Tool2011
- Author(s)
  K. Nakamoto, T. Fujimoto, Y. Kawaguchi, T. Ishida, Y. Takeuchi
- Organizer
  Proc. of 15th Int. Conf. on Mechatronics Technology (ICMT2011)
- Place of Presentation
  Melbourne, Australia
- Year and Date
  2011-12-01
- Data Source
  KAKENHI-PROJECT-23360069
[Presentation] Basic Performance Analysis of Cooling Pipe with a Changing Cross Section2009
- Author(s)
  Seiji NAGASAWA, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Organizer
  Proc. of 5th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), Manufacturing and Machine Tool Division & Manufacturing System Division, Japan Society of Mechanical Engineers (JSME)
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-02
- Data Source
  KAKENHI-PROJECT-20760085
[Presentation] Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining -Formulation of Post Processor-2009
- Author(s)
  Eiki ISHIGURO, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI
- Organizer
  Proc. of 5th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), Manufacturing and Machine Tool Division & Manufacturing System Division, Japan Society of Mechanical Engineers (JSME)
- Place of Presentation
  Osaka, Japan
- Year and Date
  2009-12-03
- Data Source
  KAKENHI-PROJECT-20760085
[Presentation] Development of a Support System of Operation Planning for Parallel Kinematic Machine Tool2008
- Author(s)
  中本圭一
- Organizer
  The 7th International Conference on Machine Automation
- Place of Presentation
  淡路夢舞台国際会議場
- Year and Date
  2008-09-26
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] A Study on Rapid Search Method of Effective Tool Postures in 3+2-Axis Control Milling2008
- Author(s)
  中本圭一
- Organizer
  2008 International Symposium on Flexible Automation
- Place of Presentation
  ジョージア工科大
- Year and Date
  2008-06-24
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Development of a Support System of Operation Planning for Parallel Kinematic Machine Tool2008
- Author(s)
  K. NAKAMOTO, K. OTAKE, K. SHIRASE, T. MORIWAKI
- Organizer
  The 7th International Conference on Machine Automation (ICMA2008)
- Place of Presentation
  Awaji
- Year and Date
  2008-09-26
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] 5軸制御工作機械のための工程設計支援システムの開発に関する研究-3+2軸制御加工における工具姿勢の高速な決定方法-2008
- Author(s)
  角田充, 中本圭一, 白瀬敬一
- Organizer
  2008年度精密工学会秋季大会学術講演会
- Place of Presentation
  東北大学
- Year and Date
  2008-09-19
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] A Study on Rapid Search Method of Effective Tool Postures in 3+2-Axis Control Milling2008
- Author(s)
  K. NAKAMOTO, M. TSUNODA, K. SHIRASE, T. MORIWAKI
- Organizer
  2008 International Symposium on Flexible Automation (ISFA2008)
- Place of Presentation
  Atlanta
- Year and Date
  2008-06-24
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] パラレルメカニズム形工作機械のための工程設計支援技術に関する研究-様々な工具の位置姿勢における振動特性-2008
- Author(s)
  中本圭一, 大竹香太, 森脇俊道, 白瀬敬一
- Organizer
  2008年度精密工学会春季大会学術講演会
- Place of Presentation
  明治大学
- Year and Date
  2008-03-18
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Milling Process Control by Digital Copy Milling System Integrated Voxel Model Simulator(in Japanese)2007
- Author(s)
  T. Funatsu, T. Sakaguchi, K. Nakamoto, K. Shirase
- Organizer
  2007 Annual Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Asahikawa/Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] Rapid Removal Volume Evaluation for Tool Posture Decision in 3+2-Axis Control Milling2007
- Author(s)
  K. NAKAMOTO, M. TSUNODA, T. INAOKA, K. SHIRASE, T. MORIWAKI
- Organizer
  The 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)
- Place of Presentation
  Fukuoka
- Year and Date
  2007-11-08
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] パラレルメカニズム形工作機械のための工程設計支援技術に関する研究-サーボモータ負荷と振動特性の評価-2007
- Author(s)
  大竹香太, 中本圭一, 森脇俊道
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  旭川市ときわ市民ホール
- Year and Date
  2007-09-13
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] Rapid Removal Volume Evaluation for Tool Posture Decision in 3+2-Axis Control Millins2007
- Author(s)
  中本圭一
- Organizer
  The 4th International Conference onLeading Edge Mannfactuiring in 21st Century
- Place of Presentation
  福岡国際会議場
- Year and Date
  2007-11-08
- Data Source
  KAKENHI-PROJECT-19760088
[Presentation] ボクセルモデルを取り入れたNC工作機械の自律制御に関する研究2007
- Author(s)
  船津竹史, 阪口龍彦, 中本圭一, 白瀬敬一
- Organizer
  2007年度精密工学会秋季大会学術講演会
- Place of Presentation
  旭川市ときわ市民ホール,旭川
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] Rapid Removal Volume Evaluation for Tool Posture Decision in 3+2 axis Control milling2007
- Author(s)
  K. Nakamoto, M. Tsunoda, T. Inaoka, K. Shirase, T. Moriwaki
- Organizer
  The 4th International Conference on Leading Edge Manufacturing in 21st Century
- Place of Presentation
  Fukuoka, Japan
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] Machining Shape Simulation Based on Voxel Model(in Japanese)2006
- Author(s)
  K. Shirase, T. Kouno, T, Sakaguchi, K. Nakamoto
- Organizer
  06 Kansai Branch Annual Meeting of the Japan Society for Precision Engineering
- Place of Presentation
  Wakayama/Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] ボクセルモデルによる加工形状シミュレーション2006
- Author(s)
  白瀬敬一, 河野智之, 阪口龍彦, 中本圭一
- Organizer
  精密工学会2006年度関西地方定期学術講演会
- Place of Presentation
  和歌山大学,和歌山
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063
[Presentation] 加工プロセスシミュレーションのためのボクセルモデルの研究2006
- Author(s)
  河野智之, 小山智, 阪口龍彦, 中本圭一, 白瀬敬一
- Organizer
  日本機械学会第6回生産加工・工作機械部門講演会
- Place of Presentation
  生産性国際交流センター,葉山
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-17360063

1. Sasahara Hiroyuki (00205882)

# of Collaborated Projects : 6results

# of Collaborated Products : 0results
2. SUZUKI Hirofumi (20282098)

# of Collaborated Projects : 3results

# of Collaborated Products : 0results
3. SHIBASAKA Toshirou (80094530)

# of Collaborated Projects : 2results

# of Collaborated Products : 0results
4. ISHIDA Tohru (20313421)

# of Collaborated Projects : 2results

# of Collaborated Products : 13results
5. TAKEUCHI Yoshimi (50107546)

# of Collaborated Projects : 2results

# of Collaborated Products : 18results
6. IWAMOTO Kaoru (50408712)

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
7. MORIWAKI Toshimichi (00031104)

# of Collaborated Projects : 1results

# of Collaborated Products : 2results
8. SHIRASE Keiichi (80171049)

# of Collaborated Projects : 1results

# of Collaborated Products : 9results
9. SAKAGUCHI Tatsuhiko (00403303)

# of Collaborated Projects : 1results

# of Collaborated Products : 5results
10. YAO Yasuhiro

# of Collaborated Projects : 1results

# of Collaborated Products : 0results
11. 幸田盛堂

# of Collaborated Projects : 1results

# of Collaborated Products : 0results

NAKAMOTO Keiichi 中本 圭一

Research Projects

Research Products

Co-Researchers

テクスチャ付き自由曲面金型の非加工時間短縮に向けた超精密切削加工システムの開発Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

工作物のトポロジー最適化に基づいた切削加工の工程設計に関わる技能の体系化Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

複雑3次元形状のナノ切削を導く加工シミュレータの構築と微小径工具の機上成形（国際共同研究強化）Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

ワイヤー＋アーク放電方式による金属材料の付加加工における形状精度と健全性Ongoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

機上計測と工具の機上成形機能を兼ね備えた超精密自律型工作機械の開発Principal InvestigatorOngoing

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Dexterous machining of soft objects by employing an aqueous solution of sodium acetatePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the optimization of grinding point environment by a direct supply of grinding fluid from inner side of the grinding wheel

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on dexterous machining to create high value-added products

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of CAPP System for Multi-tasking Machining by using the physical model of machine toolsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Creation of Cross Section's Changing Holes by means of Electrical Discharge Machining Using a Tool Electrode with Posture and Position Controllable Function

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Ultra Precision Cutting of Steel with Single Crystal Diamond Tool

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of a Support System of Process Planning for Multi-Axis Controlled Machine ToolsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

PKM形工作機械による自由曲面形状の高速・高精度加工に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

NAKAMOTO Keiichi 中本圭一