メニュー
Search
Search Research Projects
Search Researchers
How to Use
Japanese
English
Back to previous page
TANI Yasuhiro
谷 泰弘
Connect your ORCID iD
*help
…
Alternative Names
谷 秦弘
Less
Researcher Number
80143527
Other IDs
External Links
Affiliation (based on the past Project Information)
*help
2003: 東京大学, 生産技術研究所, 教授
1998 – 2001: 東京大学, 生産技術研究所, 教授
1990 – 1996: 東京大学, 生産技術研究所, 助教授
1986 – 1988: Institute of Industrial Science, University of Tokyo, 生産技術研究所, 助教授
1986 – 1988: 東京大学, 生産技術研究所第二部, 助教授
1986: Institute of Industrial Science. University of Tokyo, 生産技術研究所, 助教授
1985: 東京大学, 生技研, 助教授
Review Section/Research Field
Principal Investigator
機械工作
/
機械工作・生産工学
/
Production engineering/Processing studies
Except Principal Investigator
機械工作
/
機械工作・生産工学
Keywords
Principal Investigator
硬脆材料 / 超精密加工 / ダイヤモンド / 電気泳動現象 / 砥粒加工 / 研磨加工 / 超精密切削 / 超微細砥粒 / 鏡面研削 / Electrophoretic Deposition
…
More
/ Grinding / 砥石 / 機械工作 / 固定砥粒加工工具 / 電鋳 / 複合めっき / キャリア / 水晶 / 浮上工具 / 磁気ディスク / アルミニウム / 4分割フォトセンサ / オンマシン計測 / 形状精度 / 単刃切削 / 圧力転写 / Ultraprecision Turning / Flying Tool / Diamond / Magnetic Disc / Aluminum / Quadrant Photodiode / On-Machine Measurement / Form Accuracy / チッピング / 研削切断 / スライシングマシン / ダイシング / スライシング / 電着現象 / コロイダルシリカ / 外周刃 / Ultrafine Abrasives / Abrasive Cutoff / Chipping / Brittle Materials / Colloidal Silica / 延性モード / 切削 / 超精密計測 / 超精密制御 / ダイヤモンド切削 / 超精密研削 / 切込み深さ / 加工変質 / 加工精度 / 形状計測 / 延性モ-ド / Both hard and brittle / Damage Layt / Cutting / Ultra precesjion maching / Ultra precession Majering / Ultra precession centrole / Diamond cutting / Ulera precession grinding / 超微粒子 / 超微粒砥石 / Ultrafine abrasives / Electrophoresis phenomenon / Ultrafine power / Mirror grinding / Both hard and brittle materials / Ultraprecision maching / Abrasive prosessing / Grinding wheel / 研削 / 微細砥粒 / ダイヤモンド砥粒 / 砥粒 / 電気泳動 / 電気浸透 / 結合剤 / Grinding Wheel / Fine Abrasive / Diamond Abrasive / Hard and Brittle Material / マイクロカプセル / 界面電気現象 / 界面重縮合 / 研削砥石 / コロイド / 研磨テープ / メカのケミカル作用 / Machining / Ultra precision machining / Abrasive machining / Bonded abrasive tool / Micro capsule / Electrical surface phenomena / In Situ polymerization / 低位加工 / 高機能低位 / ゾルゲル法 / 凝集低粒 / 固定低位加工 / 遊離低位加工 / 高機能砥粒 / 凝集砥粒 / 固定砥粒加工 / 遊離砥粒加工 / Polishing / High-Performance abrasive / Sol-Gel method / Agglomerative abrasive grain / Fixed-Abrasive tool / Loose abrasive tool / 磁性流体 / 表面仕上 / 研磨機械 / 磁気浮揚 / 研磨特性 / 研磨 / 永久磁石 / 構造解析 / 磁場解析 / 研磨装置 / 鏡面加工 / Magnetic fluid / Fine finishing / Finishing machine / Magnetic levitational buoyancy / Finishing ability
…
More
Except Principal Investigator
超精密加工 / リニアモータ / 機械加工 / パーソナルコンピュータ / 超精密工作機械 / 超精密主軸 / 精密送り機構 / 微小環境変化 / 変形の予測 / 熱変形 / 補正制御 / 微小変形 / 加工精度 / シミュレ-ション / 変形制御 / Ultra Precision Machining / Ultra Precision Machine Tool / Ultra Precision Spindle / Ultra Precision Feed Mechanism / Disturbance in Environment / Estimation of Deformation / Thermal Deformation / Compensation Control / レーザトラッピング / マイクロメカニズム / マイクロマシニング / 微粒子 / YAGレーザ / 8次元計測 / 微細加工 / レーザ加工 / 超微粒子 / 光圧力 / laser trapping / wicro-mechanism / micro-machining / fine abrasive / YAG laser / Ultra precision machining / 3D-measurement / 表面性状 / 加工変質層 / 評価 / 超音波顕微鏡 / V(z)曲線 / 表面弾性波 / 空間反射パワー / 波形解析 / Surface integrity / Damaged layer / Evaluation / Acoustic microscope / V(z) characteristic / Rayleigh wave / Reflection power / 新素材 / セラミックス / レジンコンクリート / 電歪素子 / 超精密 / ナイロン焼接体 / セラミクス / 送り機構 / 異方性エッチング / new material / ceramics / resin concrete / linear motor / piezo-electric actuater / sintered nylon / 走査電子顕微鏡 / 反射電子信号 / 表面形状 / 法線検出 / 画像処理 / ヴィッカース圧痕形状 / 加速電圧 / 検出器・試料間距離 / 反射電子画像 / 表面粗さ / ディジタル処理 / 3次元表示 / 加工精度計測 / Scanning Electron Microscope / Machining / Backscatterd Electron Signal / Surface Form / Detection of Normal / Image Processing / Presonal Computer / Pressed Mark of Vickers Hardness Test / Emission Voltage / 真直度 / 測定 / レーザ測定法 / 逐次二点法 / 静圧空気テーブル / 容量型変位センサ / サブミクロン / テーブルの運動 / テーブルの案内 / 繰り返し精度 / レーザー測定法 / 精度測定 / 逐次2点法 / 平面度 / 2軸エアスライド / 容量型高精度微小変位計 / 高速測定 / Straightness / Measurement / Measurement Method by Laser / Sequential Two Points Method / Table Supported by Static Air Pressure / Displacement Sensor in Terms of Capacitance / Sub-Micron Metar / Motion of Table / Cross Slide / 超精密ダイヤモンド正面旋盤 / 知能型機械要素 / 真空チャック / プラスチック多孔質体 / レーザ光 / 真直度測定法 / 4分割フォトダイオード / Ultra-precision facing diamond lathe / Intelligent machine element / Linear motor / Vacuum chuck
Less
Research Projects
(
16
results)
Research Products
(
2
results)
Co-Researchers
(
15
People)
Project Start Year (Newest)
Project Start Year (Oldest)
極薄研磨保持具の高速製造法に関する研究
Principal Investigator
Principal Investigator
谷 泰弘
Project Period (FY)
2003
Research Category
Grant-in-Aid for Exploratory Research
Research Field
Production engineering/Processing studies
Research Institution
The University of Tokyo
Development of fixed abrasive tools utilizing sol-gel method
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
2000 – 2001
Research Category
Grant-in-Aid for Scientific Research (B)
Research Field
機械工作・生産工学
Research Institution
The University of Tokyo
Development of high performance grinding stone using electrophoresis deposition
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
1998 – 1999
Research Category
Grant-in-Aid for Scientific Research (B)
Research Field
機械工作・生産工学
Research Institution
University of Tokyo
Development of Highly Homogeneous Pellets Applying Electrophoretic Deposition of Ultrafine Abrasive
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
1995 – 1996
Research Category
Grant-in-Aid for Scientific Research (A)
Research Field
機械工作・生産工学
Research Institution
University of Tokyo
Study on a micro-maching appoying the lasertrapping of fine abrasives.
Principal Investigator
IKENO Junichi
Project Period (FY)
1994 – 1995
Research Category
Grant-in-Aid for Developmental Scientific Research (B)
Research Field
機械工作・生産工学
Research Institution
Toyohashi University of Technology
Development of Ultrafine abrasive pellets Applying Electrophoretic deposition
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
1992 – 1993
Research Category
Grant-in-Aid for Developmental Scientific Research (B)
Research Field
機械工作
Research Institution
University of Tokyo
Stady on ductile mode cutting of both hard and brittel materials
Principal Investigator
Principal Investigator
TANI Yashuhiro
Project Period (FY)
1991 – 1993
Research Category
Grant-in-Aid for Co-operative Research (A)
Research Field
機械工作
Research Institution
University of Tokyo
Simulation and Control of Deformations for Next Generation of Ultra Precision Machine Tools
Principal Investigator
MORIWAKI Toshimichi
Project Period (FY)
1990 – 1991
Research Category
Grant-in-Aid for Co-operative Research (A)
Research Field
機械工作
Research Institution
Kobe University
Study on Single-Point Machining Technology of Supersmooth Surface Using a Flying Tool
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
1990 – 1991
Research Category
Grant-in-Aid for General Scientific Research (B)
Research Field
機械工作
Research Institution
University of Tokyo
Development of New type slicing machine that has slicing technology pplying lecthephoretic Deposition
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
1990 – 1991
Research Category
Grant-in-Aid for Developmental Scientific Research (B)
Research Field
機械工作
Research Institution
Univ. of Tokyo
Application of Measurement Method of Sequential Points to Parts with High Accuracy
Principal Investigator
SATO Hisayoshi
Project Period (FY)
1987 – 1988
Research Category
Grant-in-Aid for General Scientific Research (B)
Research Field
機械工作
Research Institution
Institute of Industrial Science, University of Tokyo
Development of an ultra-precision diamond facing lathe using intelligent machine elements
Principal Investigator
IKENO Jun'ichi
Project Period (FY)
1987 – 1988
Research Category
Grant-in-Aid for Developmental Scientific Research
Research Field
機械工作
Research Institution
Institute of Industrial Science, University of Tokyo
Application of New Materials to Designing of "Nano-mechanism"
Principal Investigator
FURUKAWA Yuji
Project Period (FY)
1986 – 1987
Research Category
Grant-in-Aid for Co-operative Research (A)
Research Field
機械工作
Research Institution
Tokyo Metropolitan University
Improvenment of Measuring Capability of scanning Electron Microscope for Surface Form.
Principal Investigator
HISAYOSHI SATO
Project Period (FY)
1986 – 1987
Research Category
Grant-in-Aid for Developmental Scientific Research
Research Field
機械工作
Research Institution
University of Tokyo
Quantitative Evaluation of the Damaged Layer by Machining Using a Scanning Acoustic Microscope
Principal Investigator
SATO Hisayoshi
Project Period (FY)
1985 – 1986
Research Category
Grant-in-Aid for General Scientific Research (B)
Research Field
機械工作
Research Institution
University of Tokyo
Development of High-Efficiency Finishing Machine by Magnetic Float Polishing
Principal Investigator
Principal Investigator
TANI Yasuhiro
Project Period (FY)
1985 – 1986
Research Category
Grant-in-Aid for Developmental Scientific Research
Research Field
機械工作
Research Institution
University of Tokyo
All
2001
All
Journal Article
[Journal Article] Development of a Lapping Film Utilizing Agglomerative Superfine Silica Abrasives for Edge Finishing of a Silicon Wafer
2001
Author(s)
T.Enomoto, Y.Tani, K.Orii
Journal Title
Proc.ICPE2001
Pages
: 391-395
Description
「研究成果報告書概要(欧文)」より
Data Source
KAKENHI-PROJECT-12450055
[Journal Article] Development of a Lapping Film Utilizing Agglomerative Superfine Silica Abrasives for Edge Finishing of a Silicon Wafer
2001
Author(s)
T.Enomoto, Y.Tani, K.Orii
Journal Title
Proc. ICPE2001
Pages
: 391-395
Description
「研究成果報告書概要(和文)」より
Data Source
KAKENHI-PROJECT-12450055
# of Projects (Dsc)
# of Projects (Asc)
1.
IKENO Jun'ichi
(10184441)
# of Collaborated Projects:
10 results
# of Collaborated Products:
0 results
2.
KAWADA Kenji
# of Collaborated Projects:
8 results
# of Collaborated Products:
0 results
3.
SATO Hisayoshi
(10013103)
# of Collaborated Projects:
4 results
# of Collaborated Products:
0 results
4.
O-HORI Masanori
(90143528)
# of Collaborated Projects:
4 results
# of Collaborated Products:
0 results
5.
SEMBA Takuya
(30154678)
# of Collaborated Projects:
4 results
# of Collaborated Products:
0 results
6.
OISHI Susumu
(70094258)
# of Collaborated Projects:
2 results
# of Collaborated Products:
0 results
7.
MORIWAKI Toshimichi
(00031104)
# of Collaborated Projects:
2 results
# of Collaborated Products:
0 results
8.
TSUTSUMI Masaomi
(90108217)
# of Collaborated Projects:
2 results
# of Collaborated Products:
0 results
9.
FURUKAWA Yuji
(10087190)
# of Collaborated Projects:
2 results
# of Collaborated Products:
0 results
10.
HIGUCHI Toshiro
(10111569)
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
11.
YANAGI Kazuhisa
(80108216)
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
12.
HORIUCHI Osamu
(20029185)
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
13.
YANAGIHARA Kiyoshi
(90313113)
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
14.
MORONUKI Nobuyuki
(90166463)
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
15.
OHORI Masanori
# of Collaborated Projects:
1 results
# of Collaborated Products:
0 results
×
Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.
この研究者とORCID iDの連携を行いますか？
※ この処理は、研究者本人だけが実行できます。
×
×
