• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

SATO Hisayoshi  佐藤 壽芳

ORCIDConnect your ORCID iD *help
… Alternative Names

HISAYOSHI SATO  佐藤 壽芳

Less
Researcher Number 10013103
External Links
Affiliation (based on the past Project Information) *help 1998 – 1999: 中央大学, 理工学部・精密機械工学科, 教授
1988: Institute of Industrial Science, University of Tokyo, professor, 生産技術研究所, 教授
1987 – 1988: Professor, Institute of Industrial Science, University of Tokyo, 生産技術研究所第二部, 教授
1986: Institute of Industrial Science, University of Tokyo, 生産技術研究所, 教授
Review Section/Research Field
Principal Investigator
機械工作 / 機械工作・生産工学
Except Principal Investigator
機械工作
Keywords
Principal Investigator
機械加工 / パーソナルコンピュータ / 工作機械構造 / 接合部特性 / 履歴非線形特性 / モード解析法 / 動剛性 / 周波数応答特性 / 多自由度運動方程式 / 加工精度 … More / MACHINE TOOL STRUCTURE / PROPERTY OF JOINT / NONLINEARITY WITH HYSTERESIS / MODEL ANALYSIS / DYNAMIC STIFFNESS / FREQUENCY RESPONSE / EQUATION OF MOTION FOR MULTI-DEGREE-OF-FREEDOM SYSTEM / MACHINING ACCURACY / 表面性状 / 加工変質層 / 評価 / 超音波顕微鏡 / V(z)曲線 / 表面弾性波 / 空間反射パワー / 波形解析 / Surface integrity / Damaged layer / Evaluation / Acoustic microscope / V(z) characteristic / Rayleigh wave / Reflection power / 走査電子顕微鏡 / 反射電子信号 / 表面形状 / 法線検出 / 画像処理 / ヴィッカース圧痕形状 / 加速電圧 / 検出器・試料間距離 / 反射電子画像 / 表面粗さ / ディジタル処理 / 3次元表示 / 加工精度計測 / Scanning Electron Microscope / Machining / Backscatterd Electron Signal / Surface Form / Detection of Normal / Image Processing / Presonal Computer / Pressed Mark of Vickers Hardness Test / Emission Voltage / 真直度 / 測定 / レーザ測定法 / 逐次二点法 / 静圧空気テーブル / 容量型変位センサ / サブミクロン / テーブルの運動 / テーブルの案内 / 繰り返し精度 / レーザー測定法 / 精度測定 / 逐次2点法 / 平面度 / 2軸エアスライド / 容量型高精度微小変位計 / 高速測定 / Straightness / Measurement / Measurement Method by Laser / Sequential Two Points Method / Table Supported by Static Air Pressure / Displacement Sensor in Terms of Capacitance / Sub-Micron Metar / Motion of Table / Cross Slide … More
Except Principal Investigator
超精密ダイヤモンド正面旋盤 / 知能型機械要素 / リニアモータ / 真空チャック / プラスチック多孔質体 / レーザ光 / 真直度測定法 / 4分割フォトダイオード / Ultra-precision facing diamond lathe / Intelligent machine element / Linear motor / Vacuum chuck Less
  • Research Projects

    (5 results)
  • Co-Researchers

    (5 People)
  •  ANALYSIS ON NONLINEAR BEHAVIOR OF MULTI-DEGREE-OF-FREEDOM SYSTEM RELATED WITH DYNAMIC STIFFNESS OF MACHINE TOOLPrincipal Investigator

    • Principal Investigator
      SATO Hisayoshi
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      機械工作・生産工学
    • Research Institution
      Chuo University
  •  Application of Measurement Method of Sequential Points to Parts with High AccuracyPrincipal Investigator

    • Principal Investigator
      SATO Hisayoshi
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      Institute of Industrial Science, University of Tokyo
  •  Development of an ultra-precision diamond facing lathe using intelligent machine elements

    • Principal Investigator
      IKENO Jun'ichi
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      機械工作
    • Research Institution
      Institute of Industrial Science, University of Tokyo
  •  Improvenment of Measuring Capability of scanning Electron Microscope for Surface Form.Principal Investigator

    • Principal Investigator
      HISAYOSHI SATO
    • Project Period (FY)
      1986 – 1987
    • Research Category
      Grant-in-Aid for Developmental Scientific Research
    • Research Field
      機械工作
    • Research Institution
      University of Tokyo
  •  Quantitative Evaluation of the Damaged Layer by Machining Using a Scanning Acoustic MicroscopePrincipal Investigator

    • Principal Investigator
      SATO Hisayoshi
    • Project Period (FY)
      1985 – 1986
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      機械工作
    • Research Institution
      University of Tokyo
  • 1.  IKENO Jun'ichi (10184441)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 2.  TANI Yasuhiro (80143527)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 3.  O-HORI Masanori (90143528)
    # of Collaborated Projects: 4 results
    # of Collaborated Products: 0 results
  • 4.  SEMBA Takuya (30154678)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 5.  OHORI Masanori
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi