SAIMOTO Akihide 才本明秀

Researcher Number	00253633
Other IDs
Affiliation (Current)	2025: 長崎大学, 総合生産科学研究科(工学系), 教授
Affiliation (based on the past Project Information) *help	2011 – 2021: 長崎大学, 工学研究科, 教授 2011 – 2013: 長崎大学, 工学(系)研究科(研究院), 教授 2009 – 2010: Nagasaki University, 工学部, 教授 2008: 長崎大学, 大学院・生産科学研究科, 准教授 2008: 長崎大学, 生産科学研究科, 准教授 … More 2001 – 2004: 長崎大学, 生産科学研究科, 助教授 2002: Kyushu Sangyo University, Faculty of Engineering, Assistant Professor, 大学院・生産科学研究科, 助教授 2002: 長崎大学, 工学部, 助教授 1999 – 2000: 長崎大学, 工学部, 助教授 1995 – 1997: 長崎大学, 工学部, 助教授 Less
Review Section/Research Field	Principal Investigator Materials/Mechanics of materials / Civil engineering materials/Construction/Construction management / Materials/Mechanics of materials Except Principal Investigator Structural engineering/Earthquake engineering/Maintenance management engineering / Materials/Mechanics of materials / 構造工学・地震工学 / Basic Section 22010:Civil engineering material, execution and construction management-related / Materials/Mechanics of materials
Keywords	Principal Investigator き裂伝ぱ / き裂進展 / レーザ加工 / ぜい性材料 / ぜい性破壊 / き裂合体 / 加工シミュレーション / 合力 / 体積力法 / 三角形表面要素 … More / 3次元き裂 / メッシュフリー解析 / ３次元き裂 / 応力解析 / 表面剥離 / 熱弾性解析 / レーザー加工 / 表面仕上げ / 熱応力 / 破壊じん性 / ESPI / 動ひずみ計測 / 複合材料 / 破壊 / 全視野計測 / DIC / EPSI / 光学的全視野計測法 / 粒子法 / 破壊制御 / 非接触加工 / 最適化 / 破壊シミュレーション / 温度制御 / 自動加工 / 熱応力割断 … More Except Principal Investigator 体積力法 / 非破壊検査 / Thermal stress cleaving / Unsteady thermal stress / 熱応力割断 / 非定常熱応力 / 光学的計測法 / 棒状スキャナ / デジタル画像相関法 / 維持管理工学 / 3次元形状計測 / 診断 / 3Dデータ / ３Ｄデータ / 劣化 / ひび割れ / コンクリート / インフラ老朽化 / 画像解析 / ３D / 老朽化 / 画像 / デジタルカメラ / デジタル画像 / 橋梁 / 検査 / 点検 / 維持管理 / non-destructive inspection / FE analysis / free vibration analysis / plates & shells / membrane structures / electronic speckle pattern interferometry / horographic interferometry / three dimensional measurement / 三次元形状計測 / FEM解析 / 振動解析 / シェル構造 / 膜構造 / スペックル干渉計測 / ホログラフィ干渉計測 / Compression center / Inclination of crack face / Body force method / Crack bend condition / Brittle material / Crack extension / き裂分岐 / 圧力中心 / き裂面の倒れ / き裂屈曲条件 / ぜい性材料 / き裂進展 / Body Force Method / Wing crack / Linear Fracture mechanics / Compressive shear fracture / Crack growth simulation / 破壊基準 / 破壊力学 / 弾性 / シミュレーション / ぜい性破壊 / き裂屈折条件 / き裂伝ぱ / 多数き裂群 / ウイングき裂 / ウィングき裂 / 線形破壊力学 / 圧縮せん断破壊 / き裂伝ぱシミュレーション / Stress intensity factor / Finite element method / Band heating / 有限要素解析 / 3次元き裂 / sandwich structure / uniaxial tension member model / 2D-FEM analysis / selfdiagnostic function of CFGFRP composites / thermal, stress and crack width analysis of mass concrete structures / crack analysis / optimal spacing of crack-inducing joints / high-durability permanent concrete form / ひび割れ発生検知機能 / ひび割れ誘導目地 / ひびわれ検知 / CFGFRP / 温度・応力・ひびわれ解析 / サンドイッチ構造 / 一軸引張部材モデル / 2次元FEM解析 / CFGFRPのひびわれ検知機能 / 温度・応力・ひびわれ幅解析 / ひびわれ解析 / ひびわれ誘導目地 / 高耐久性埋設型枠 / 劣化環境インパクト / 内視鏡 / 劣化環境インパクト評価 / UAV / 3Dレーザースキャナ / 固有振動数計 / 誘導加熱装置 / 疲労亀裂検知 / ひび割れ劣化診断 / 全視野計測法 / レーザードップラ速度計 / 応力解放法 / 劣化・健全土診断 / インフラ構造物 / 光学的計測技術 / 超音波 / レーザー / SLANDI / リアルタイム / 振動計測 / 光学的手法 / 光学的非接触全視野計測法 / 微破壊検査 / 斐破壊検査 / レーザドップラ速度計 / 光学的全視野計測法 / 平和祈念像3D計測 / RCはりの斜めひび割れ / 張力膜のリンクル / FRP複合材 / 切欠き鋼部材 / 非接触全視野計測 / 電子スペックルパターン干渉法 Less

Development of innovative maintenance system of infrastructure using 3D technology
- Principal Investigator
  
  Demizu Akira
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 22010:Civil engineering material, execution and construction management-related
- Research Institution
  Nagasaki University
Development of super strong planar surface by controling a 3D crack propagationPrincipal Investigator
- Principal Investigator
  
  SAIMOTO Akihide
- Project Period (FY)
  2016 – 2018
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nagasaki University
Elucidation and realization of laser planing technique based on 3D crack growth analysisPrincipal Investigator
- Principal Investigator
  
  SAIMOTO Akihide
- Project Period (FY)
  2013 – 2015
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nagasaki University
Studies on the evaluation method of deterioration and health in the micro-meso-macro level of infrastructure by optical measurement technology
- Principal Investigator
  
  MATSUDA Hiroshi
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural engineering/Earthquake engineering/Maintenance management engineering
- Research Institution
  Nagasaki University
Development of Scanning Laser-induced Acoustic Non-destructive Inspection (SLANDI)
- Principal Investigator
  
  KOYAMA Atsuhiro
- Project Period (FY)
  2011 – 2013
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nagasaki University
Development of real-time non-contact vibration measurement by optical methods and application to nondestructive testing
- Principal Investigator
  
  MATSUDA Hiroshi
- Project Period (FY)
  2009 – 2011
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural engineering/Earthquake engineering/Maintenance management engineering
- Research Institution
  Nagasaki University
Clarification of the mechanism of crack initiation and propagation in composite materials by non-contact optical full-field measurement and smoothed particle applied mechanicsPrincipal Investigator
- Principal Investigator
  
  AKIHIDE Saimoto, 黄美
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Civil engineering materials/Construction/Construction management
- Research Institution
  Nagasaki University
Development of multi-scale structural damage identification by utilizing full-field optical sensing techniques
- Principal Investigator
  
  MATSUDA Hiroshi
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural engineering/Earthquake engineering/Maintenance management engineering
- Research Institution
  Nagasaki University
3Dレーザ及びスペックル干渉を用いた光学的手法による全視野変位・ひずみ計測
- Principal Investigator
  
  MATSUDA Hiroshi
- Project Period (FY)
  2004
- Research Category
  
  Grant-in-Aid for Exploratory Research
- Research Field
  
  Structural engineering/Earthquake engineering/Maintenance management engineering
- Research Institution
  Nagasaki University
Structural Characteristics of Membranes & Shells and Applications to Non-Destructive Inspection using 3D Measurement and Holographic Interferometry
- Principal Investigator
  
  MATSUDA Hiroshi
- Project Period (FY)
  2002 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  構造工学・地震工学
- Research Institution
  Nagasaki University
Study on a thermal stress cleaving of brittle materials along a curvilinear path
- Principal Investigator
  
  IMAI Yasufumi
- Project Period (FY)
  2001 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nagasaki University
Development of the Method of Crack Growth Analysis and Its Applications
- Principal Investigator
  
  NISITANI Hironobu
- Project Period (FY)
  2000 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Kyushu Sangyo University
熱応力割断におけるき裂伝ぱ経路の制御に関する研究Principal Investigator
- Principal Investigator
  
  才本明秀
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Encouragement of Young Scientists (A)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nagasaki University
Study on the method of thermal stress cleaving of a brittle solid
- Principal Investigator
  
  IMAI Yasufumi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Materials/Mechanics of materials
- Research Institution
  Nagasaki University
Crack Analysis of RC Structures with a highly durable embedded concrete form and Optimal Providing Crack Inducing Joint
- Principal Investigator
  
  MATSUDA Hiroshi
- Project Period (FY)
  1995 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  構造工学・地震工学
- Research Institution
  Nagasaki University

All 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Other

All Journal Article Presentation Book

[Book] Advances in Fracture and Damage Mechanics IX2010
- Author(s)
  Eds. A.Saimoto, M.H. Aliabadi
- Total Pages
  894
- Publisher
  Trans Tech Publications
- Data Source
  KAKENHI-PROJECT-20560433
[Book] Advances in Fracture and Damage MechanicsIX, Key Engineering Materials Vols.452-4532010
- Author(s)
  A.Saimoto, M.H.Aliabadi
- Total Pages
  894
- Publisher
  Trans Tech Publications
- Data Source
  KAKENHI-PROJECT-21360217
[Book] Advances in Fracture and Damage Mechanics IX, Key Engineering Materials Vols. 452-4532010
- Author(s)
  A.Saimoto, M.H.Aliabadi
- Total Pages
  894
- Publisher
  Trans Tech Publications
- Data Source
  KAKENHI-PROJECT-20560433
[Book] Mechanics and Model-Based Control of Smart Materials and Structures2009
- Author(s)
  Akihide Saimoto
- Total Pages
  222
- Publisher
  Springer Wien New York
- Data Source
  KAKENHI-PROJECT-20560433
[Book] Mechanics and Model-Based Control of Smart Materials and Structures(Eds.Hans Irschik, Michael Krommer, Kazumi Watanabe, Toshio Furukawa)2009
- Author(s)
  Akihide Saimoto
- Publisher
  Springer Wien New York
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Accurate SIF Analysis of a Partially Cylindrical Side Crack Opened by Far-Field Tension2018
- Author(s)
  Sonobe Yohei、Ino Takuichiro、Saimoto Akihide、Takase Toru、Koyama Atsuhiro、Shatil Giora
- Journal Title
  
  Key Engineering Materials
  
  Volume: 774 Pages: 583-588
- DOI
  10.4028/www.scientific.net/kem.774.583
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Journal Article] Analysis of Residual Stress Around Semi-Circular Surface Notches due to Excessive Pressure2017
- Author(s)
  Takuichiro Ino, Yohei Sonobe, Akihide Saimoto, Tomokazu Hashiguchi
- Journal Title
  
  Key Engineering Materials
  
  Volume: 754 Pages: 123-126
- DOI
  10.4028/www.scientific.net/kem.754.123
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K05982
[Journal Article] Analysis of Planar Crack Coalescence by Mesh-Free Body Force Method2017
- Author(s)
  Sonobe Yohei、Ino Takuichiro、Saimoto Akihide、Hasib Md. Abdul、Koyama Atsuhiro、Shatil Giora
- Journal Title
  
  Key Engineering Materials
  
  Volume: 754 Pages: 161-164
- DOI
  10.4028/www.scientific.net/kem.754.161
- Peer Reviewed / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Journal Article] Improvement of Stress Intensity Factor Analysis Using Overall Defined Basic Density Function on Crack Face2017
- Author(s)
  Md. Abdul Hasib, Yohei Sonobe, Akihide Saimoto
- Journal Title
  
  Journal of Multiscale Modeling
  
  Volume: 9(1) Issue: 01 Pages: 1-14
- DOI
  10.1142/s1756973717500068
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-16K05982
[Journal Article] Comparison of Mesh-free and Mesh-based Analyses in 3D Crack Problem2017
- Author(s)
  A. Saimoto, Y. Sonobe and G. Shatil
- Journal Title
  
  The 14th Joint Symposium of Jeju National University and Nagasaki University on Science and Technology
  
  Volume: - Pages: 2-5
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Journal Article] Stress analysis of general inclusion problem by mesh free body force method2017
- Author(s)
  Y. Sonobe, A. Saimoto and G. Shatil
- Journal Title
  
  The 14th Joint Symposium of Jeju National University and Nagasaki University on Science and Technology
  
  Volume: - Pages: 9-10
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Journal Article] Influence of Small Cavity Existing in the Vicinity of 3D Crack Front2016
- Author(s)
  M.A. Hasib and A Saimoto
- Journal Title
  
  Key Engineering Materials
  
  Volume: 665 Pages: 5-8
- DOI
  10.4028/www.scientific.net/kem.665.5
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420023
[Journal Article] 自動車フロントガラスの損傷に基づく発射弾丸入射角の実験的推定2016
- Author(s)
  平川俊介、案部雄一郎、山下珠希、内野隆一郎、丸田英基、才本明秀、石松隆和
- Journal Title
  
  日本法科学技術学会誌
  
  Volume: 20(2) Pages: 125-140
- NAID
  130005088360
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420023
[Journal Article] Evaluation of Accuracy for 2D Elastic-Plastic Analysis by Embedded Force Doublet Model Combined with Automated Delaunay Tessellation2016
- Author(s)
  Takuichiro Ino, MD Abdul Hasib, Toru Takase, Akihide Saimoto
- Journal Title
  
  Journal of Multiscale Modeling
  
  Volume: 6 Issue: 04 Pages: 1550012-1550012
- DOI
  10.1142/s1756973715500122
- Peer Reviewed / Acknowledgement Compliant
- Data Source
  KAKENHI-PROJECT-25420023
[Journal Article] Analysis of 3D Planar Crack using Body Force Method2015
- Author(s)
  Md. A. Hasib and A. Saimoto
- Journal Title
  
  Journal of Key Engineering Materials
  
  Volume: 627 Pages: 5-8
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Interference Analysis of 3D Planar Cracks by Body Force Method2014
- Author(s)
  Md. A. Hasib and A. Saimoto
- Journal Title
  
  Joint Symposium between Nagasaki University and Jeju National University
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Analysis of 3D Planar Crack using Body Force Method2014
- Author(s)
  Md. A. Hasib　and A. Saimoto
- Journal Title
  
  Key Engineering Materials
  
  Volume: 627 Pages: 5-8
- DOI
  10.4028/www.scientific.net/kem.627.5
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420023
[Journal Article] Interaction of Multiple Planar Cracks under Mixed-mode Loading2014
- Author(s)
  Md. A. Hasib and A. Saimoto
- Journal Title
  
  3rd International Conference on Mechanical, Industrial and Energy Engineering
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Versatile Analysis of Mixed-mode 3D Planar Crack2014
- Author(s)
  Md. A. Hasib and A. Saimoto
- Journal Title
  
  Asian Conference on Mechanics of Functional Materials and Structures
  
  Volume: 2014年版 Pages: 349-352
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Ballistic Estimation of the Fired Bullet based on Collision Marks at Automobile Windshield2014
- Author(s)
  S. Hirakawa, A. Saimoto, and T. Ishimatsu
- Journal Title
  
  Asian Conference on Mechanics of Functional Materials and Structures
  
  Volume: 2014年版 Pages: 357-360
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Interference Analysis of 3D Cavities and Cracks by BFM2014
- Author(s)
  Md. A. Hasib and A. Saimoto
- Journal Title
  
  Proceedings of JSME
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Stress Analysis of Functionally Graded Hollow Cylinder2014
- Author(s)
  S. Iwasaki, S. Miyanaga, T. Ino and A. Saimoto
- Journal Title
  
  Joint Symposium between Sister Universities in Mechanical Engineering
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Interference Analysis Between Crack and General Inclusion in an Infinite Plate by Body Force Method2014
- Author(s)
  Takuichiro Ino, Shohei Ueno, Akihide Saimoto
- Journal Title
  
  Key Engineering Materials
  
  Volume: 577-578 Pages: 1-4
- DOI
  10.4028/www.scientific.net/kem.577-578.1
- NAID
  120006986008
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-25420023
[Journal Article] Study on the transition of crack propagation mode in a thermal stress cleaving2014
- Author(s)
  T. Ihara, T. Tobimatsu, T. Ino and A. Saimoto
- Journal Title
  
  Joint Symposium between Sister Universities in Mechanical Engineering,
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] SIF of a Penny-shaped Crack under Bending2014
- Author(s)
  Md. A. Hasib and A. Saimoto
- Journal Title
  
  oint Symposium between Sister Universities in Mechanical Engineering
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Interference Analysis Between Cracks and Inclusion in an Infinite Plate by Body Force Method2014
- Author(s)
  Takuichiro Ino, Shohei Ueno, Akihide Saimoto
- Journal Title
  
  Key Engineering Materials
  
  Volume: Vol.577-578 Pages: 1-4
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Analysis of residual deformation of an over loaded strip2014
- Author(s)
  T. Ino and A. Saimoto
- Journal Title
  
  Joint Symposium between Sister Universities in Mechanical Engineering
  
  Volume: 2014年版
- Peer Reviewed / Acknowledgement Compliant / Open Access
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Body Force Me thod for Thermoelast ici ty. Encyclopedia of Thermal Stresses2013
- Author(s)
  A Saimoto
- Journal Title
  
  Encyclopedia of Thermal Stresses
  
  Volume: (In Press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Control of Crack Propagat ion2013
- Author(s)
  A Saimoto
- Journal Title
  
  Encyclopedia of Thermal Stresses
  
  Volume: (In Press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360182
[Journal Article] Method for solving a general elastic problem of arbitrary composite materials by embedded force doublet2011
- Author(s)
  A.Saimoto, S.Hirakawa
- Journal Title
  
  Proc.of the 9^<th> International Congress on Thermal Stresses 2011
  
  Volume: (CD-ROM)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] Solution of Circular Inhomogeneity with Arbitrary Elastic Properties2011
- Author(s)
  A.Saimoto, F.Motomura, T.Takase, A.Koyama, S.Hirakawa
- Journal Title
  
  Proc.of ATEM'11, International Conference on Advanced Technology in Experimental Mechanics 2011
  
  Volume: (CD-ROM)
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] Delaunay-Tessellation based Elastic-Plastic Analysis by Body Force Method2010
- Author(s)
  A.Saimoto, T.Ino, Y.Imai
- Journal Title
  
  Key Engineering Materials
  
  Volume: 417-418 Pages: 245-248
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] An eigenstrain-based model for residual stress arising from transient local surface heating2010
- Author(s)
  J.M.Bromley, A.Saimoto, H.Alizadeh, D.J.Smith, E.Truman
- Journal Title
  
  Proc.of Royal Society
  
  Volume: Vol.466 Pages: 1417-1422
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] High-speed thermal stress cleaving by moving heat with mist cooling2010
- Author(s)
  S.Kubota, A.Saimoto, Y.Imai
- Journal Title
  
  Acta Mechanica Vol.214
  
  Pages: 159-167
- NAID
  120006984492
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Delaunay-Tessellation based Elastic-Plastic Analysis by Body Force Method2010
- Author(s)
  A.Saimoto, T.Ino, Y.Imai
- Journal Title
  
  Key Engineering Materials
  
  Volume: 417-418 Pages: 245-248
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] High-speed thermal stress cleaving by moving heat with mist cooling2010
- Author(s)
  Shinichi Kubota・Akihide Saimoto・Yasufumi Imai
- Journal Title
  
  Acta Mechanica
  
  Volume: Vol.214 Pages: 159-167
- NAID
  120006984492
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] An eigenstrain-based model for residual stress arising from transient local surface heating2010
- Author(s)
  J.M.Bromley, A.Saimoto, H.Alizadeh, D.J.Smith, C.E.Truman
- Journal Title
  
  Proc. of the Royal Society Vol.466
  
  Pages: 1093-1116
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] An eigenstrain-based model for residual stress arising from transient local surface heating2010
- Author(s)
  J.M.Bromley, A.Saimoto, H.Alizadeh, D.J.Smith, E Truman
- Journal Title
  
  Proc.of the Royal Society Vol.466
  
  Pages: 1093-1116
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Versatile analysis of limited plasticity by body force method2010
- Author(s)
  Akihide Saimoto・Yasufumi Imai
- Journal Title
  
  Acta Mechanica
  
  Volume: Vol.214 Pages: 185-194
- NAID
  120006984487
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] Delaunay-Tessellation based Elastic-Plastic Analysis by Body Force Method2010
- Author(s)
  A.Saimoto, T.Ino, Y.Imai
- Journal Title
  
  Key Engineering Materials Vol.417-418
  
  Pages: 245-248
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] An eigenstrain-based model for residual stress arising from transient local surface heating2010
- Author(s)
  J.M.Bromley, A.Saimoto, H.Alizadeh, D.J.Smith, E.Truman
- Journal Title
  
  Proc. of the Royal Society Vol.466
  
  Pages: 1093-1116
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Versatile analysis of limited plasticity by body force method2010
- Author(s)
  A.Saimoto, Y.Imai
- Journal Title
  
  Acta Mechanica Vol.214
  
  Pages: 185-194
- NAID
  120006984487
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Versatile analysis of limited plasticity by body force method2010
- Author(s)
  A.Saimoto, Y.Imai
- Journal Title
  
  Acta Mechanica
  
  Volume: Vol.214 Pages: 185-194
- NAID
  120006984487
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Delaunay-Tessellation based Elastic-Plastic Analysis by Body Force Method2010
- Author(s)
  A.Saimoto, T.Ino, Y.Imai
- Journal Title
  
  Key Engineering Materials Vol.417-418
  
  Pages: 245-248
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] High-speed thermal stress cleaving by moving heat with mist cooling2010
- Author(s)
  S.Kubota, A.Saimoto, Y.Imai
- Journal Title
  
  Acta Mechanica
  
  Volume: Vol.214 Pages: 159-167
- NAID
  120006984492
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Crack-growth arrest by redirecting crack growth by drilling stop holes and inserting pins into them2009
- Author(s)
  C. Makabe, A. Murdani, K. Kuniyoshi, Y. Irei, A. Saimoto
- Journal Title
  
  Engineering Failure Analysis Vol. 16
  
  Pages: 475-483
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Compression induced shear damage in brittle solids by scattered microcracking2009
- Author(s)
  Akihide Saimoto, Akira Toyota, Yasufumi Imai
- Journal Title
  
  International Journal of Fracture Vol.157
  
  Pages: 101-108
- NAID
  120006984029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] 薄板ガラスの熱応力割断における進展中き裂先端形状のその場観察2009
- Author(s)
  本村文孝・今井康文・才本明秀
- Journal Title
  
  日本機械学会論文集(A編) 75巻755号
  
  Pages: 925-932
- NAID
  110007339887
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] 熱応力割断問題における熱的境界の影響2009
- Author(s)
  才本明秀・今井康文・本村文孝
- Journal Title
  
  日本機械学会論文集(A編) 75巻757号
  
  Pages: 1201-1208
- NAID
  110007358713
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Effects of support and heat dissipation in thermal stress cleaving of thin glass plates2009
- Author(s)
  F. Motomura, Y. Imai, A. Saimoto
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering Vol. 3No. 3
  
  Pages: 529-540
- NAID
  130000106330
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Effects of Support and Heat Dissipation in Thermal Stress Cleaving of Thin Glass Plates2009
- Author(s)
  F.MOTOMURA, Y.IMAI, A.SAIMOTO
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering Vol.3, No.3
  
  Pages: 529-540
- NAID
  130000106330
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Effects of support and heat dissipation in thermal stress cleaving of thin glass plates2009
- Author(s)
  F.Motomura, Y.Imai, A.Saimoto
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering
- NAID
  130000106330
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Compression induced shear damage in brittle solids by scattered microcracking2009
- Author(s)
  Akihide Saimoto, Akira Toyota, Yasufumi Imai
- Journal Title
  
  International Journal of Fracture Vol.157
  
  Pages: 101-108
- NAID
  120006984029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] 薄板ガラスの熱応力割断における進展中き裂先端形状のその場観察2009
- Author(s)
  本村文孝・今井康文・才本明秀
- Journal Title
  
  日本機械学会論文集(A編) 75巻755号
  
  Pages: 925-932
- NAID
  110007339887
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Crack-growth arrest by redirecting crack growth by drilling stop holes and inserting pins into them2009
- Author(s)
  C.Makabe, A.Murdani, K.Kuniyoshi, Y.Irei, A.Saimoto
- Journal Title
  
  Engineering Failure Analysis Vol.16
  
  Pages: 475-483
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Crack-growth arrest by redirecting crack growth by drilling stop holes and inserting pins into them2009
- Author(s)
  C.Makabe, A.Murdani, K.Kuniyoshi, Y.Irei, A.Saimoto
- Journal Title
  
  Engineering Failure Analysis Vol.16
  
  Pages: 475-483
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] Effects of Support and Heat Dissipation in Thermal Stress Cleaving of Thin Glass Plates2009
- Author(s)
  F.MOTOMURA, Y.IMAI, A.SAIMOTO
- Journal Title
  
  Journal of Solid Mechanics and Materials Engineering Vol.3, No.3
  
  Pages: 529-540
- NAID
  130000106330
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] Compression induced shear damage in brittle solids by scattered microcracking2009
- Author(s)
  A.Saimoto,A.Toyota,Y.Imai
- Journal Title
  
  International Journal of Fracture DOI 10
- NAID
  120006984029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] 熱応力割断問題における熱的境界の影響2009
- Author(s)
  才本明秀・今井康文・本村文孝
- Journal Title
  
  日本機械学会論文集(A編) 75巻757号
  
  Pages: 1201-1208
- NAID
  110007358713
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] 有限板の円孔から発生いた非対称き裂および有限板に発生した非対称き裂の引張りにおける応力拡大係数について2009
- Author(s)
  藤川正毅・才本明秀・山中大輔・真壁朝敏
- Journal Title
  
  日本機械学会論文集(A編) 75巻756号
  
  Pages: 1007-1014
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-21360217
[Journal Article] 有限板の円孔から発生いた非対称き裂および有限板に発生した非対称き裂の引張りにおける応力拡大係数について2009
- Author(s)
  藤川正毅・才本明秀・山中大輔・真壁朝敏
- Journal Title
  
  日本機械学会論文集(A編) 75巻756号
  
  Pages: 1007-1014
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20560433
[Journal Article] Compression induced shear damage in brittle solids by scattered microcracking International Journal of Fracture2009
- Author(s)
  A. Saimoto, A. Toyota, Y. Imai
- Journal Title
  
  DOI 10. 1007/s 10704-008-9296-1(2009. 3) (印刷中)(in press)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Ductile-brittle fatigue and fracture behavior of aluminum /PMMA bimaterial 3PB specimens2008
- Author(s)
  G.Shatil, A.Saimoto, X.J.Ren
- Journal Title
  
  Engineering Fracture Mechanics Vol.75
  
  Pages: 674-681
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Ductile- brittle fatigue and fracture behavior of aluminum/PMMA bimaterial 3PB specimens2008
- Author(s)
  G. Shatil, A. Saimoto, X. J. Ren
- Journal Title
  
  Engineering Fracture Mechanics Vol. 75Issues 3-4
  
  Pages: 674-681
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Stress concentration at stop-drilled holes and additional holes2008
- Author(s)
  A. Murdani, C. Makabe, A. Saimoto, Y. Irei, T. Miyazaki
- Journal Title
  
  Engineering Failure Analysis Vol. 15Issue 7
  
  Pages: 810-819
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Stress concentration at stop-drilled holes and additional holes2008
- Author(s)
  A.Murdani, C.Makabe, A.Saimoto, Y.Irei, T.Miyazaki
- Journal Title
  
  Engineering Failure Analysis Vol.15 Issue 7
  
  Pages: 810-819
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Crack growth behavior in overloaded specimen with sharp notch in low carbon steel2007
- Author(s)
  A. Purnowidodo, S. Fukuzato, A. Saimoto
- Journal Title
  
  J.of Testing and Evaluation Vol.35, No.5
  
  Pages: 1-6
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Development of damage zone by scattered cracking around crack tips in brittle solids under compression2007
- Author(s)
  A. Saimoto, 他2名
- Journal Title
  
  Key Engineering Materials Vols.348-349
  
  Pages: 965-968
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] Compression induced localization of tensile micro-cracks2007
- Author(s)
  A. Toyota, A. Saimoto, Y. Imai
- Journal Title
  
  Proc. of Int. Conf. on Advanced Technology in Experimental Mechanics 2007 (ATEM'07)
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Journal Article] 補助穴の加工によるストップホールからの疲労き裂発生の新抑制手法2007
- Author(s)
  M. Anggit, 真壁朝敏, 才本明秀, 他2名
- Journal Title
  
  材料第56巻, 第12号
  
  Pages: 1139-1144
- NAID
  130002085920
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] A Mesh-Free Analysis of Planar Crack under Thermal Stresses due to Heat Source2018
- Author(s)
  Y. Sonobe, A. Saimoto
- Organizer
  15th Joint Symposium between Sister Universities in Mechanical Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Presentation] Analysis of thermal stress intensity factor of 3D crack by mesh free body force method2018
- Author(s)
  Y. Sonobe, A. Saimoto, T. Takase, A. Koyama and T. Ino
- Organizer
  The 6th Asian Conference on Mechanics of Functional Materials and Structures
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Presentation] Interaction of Multiply Aligned Surface Cracks2018
- Author(s)
  A. Saimoto, Y. Sonobe and H. Nisitani
- Organizer
  The 6th Asian Conference on Mechanics of Functional Materials and Structures
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Presentation] Interference Effect among Parallel-aligned Planar Surface Cracks2018
- Author(s)
  A. Saimoto
- Organizer
  15th Joint Symposium between Sister Universities in Mechanical Engineering
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-16K05982
[Presentation] ３次元き裂伝ぱ解析の基礎研究2018
- Author(s)
  園部陽平、才本明秀
- Organizer
  日本材料学会九州支部信頼積工学部門委員会合同講演会
- Data Source
  KAKENHI-PROJECT-16K05982
[Presentation] レーザ加工における熱影響部の弾塑性解析2017
- Author(s)
  伊野拓一郎，園部陽平，才本明秀
- Organizer
  日本機械学会 M&M2017 材料力学カンファレンス
- Data Source
  KAKENHI-PROJECT-16K05982
[Presentation] 体積力法を用いた任意分布３次元き裂の解析2016
- Author(s)
  Md A Hasib，A Saimoto
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] メッシュフリー体積力法による傾斜機能材料の応力解析2016
- Author(s)
  岩崎俊，才本明秀，園部陽平
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 点熱源近くに存在する円板状き裂の熱応力拡大係数の解析2016
- Author(s)
  東　孝之，才本明秀，園部陽平
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] メッシュフリー体積力法を用いた二次元応力集中問題の解析2016
- Author(s)
  枦川貴史，築地原豊，才本明秀，園部陽平
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 過大内圧を受けた円孔に生じる残留応力場の解析2016
- Author(s)
  伊野拓一郎，才本明秀，中島進之介，梶原啓司
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 逆問題解析の高効率化・高精度化の研究2016
- Author(s)
  井原　理，才本明秀，谷川翔平
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] ２次元メッシュフリー体積力法を用いたき裂と円孔の干渉問題の解析2016
- Author(s)
  片瀬博昭，才本明秀，園部陽平
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] メッシュフリー体積力法を用いた２次元き裂問題の解析2016
- Author(s)
  本多亮介，才本明秀，園部陽平，冨永小夏
- Organizer
  日本機械学会九州支部　第69期総会講演会
- Place of Presentation
  熊本大学工学部（熊本県・熊本市中央区黒髪）
- Year and Date
  2016-03-15
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 材質傾斜円筒の半径方向き裂の解析2015
- Author(s)
  岩崎俊，才本明秀，伊野拓一郎
- Organizer
  日本機械学会年次大会講演会（札幌）
- Place of Presentation
  北海道大学工学部（北海道・札幌市北区）
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] Mechanical background of laser peeling of glass plates2015
- Author(s)
  A Saimoto
- Organizer
  32nd Spanish Conference on Fracture and Structural Integrity
- Place of Presentation
  サラマンカ（スペイン）
- Year and Date
  2015-04-27
- Invited / Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 熱源分布がレーザーかんなに及ぼす影響の解析2015
- Author(s)
  園部陽平，才本明秀，片瀬博昭
- Organizer
  日本機械学会年次大会講演会（札幌）
- Place of Presentation
  北海道大学工学部（北海道・札幌市北区）
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 切欠き半径が塑性域形状に及ぼす影響2015
- Author(s)
  伊野拓一郎，才本明秀
- Organizer
  日本機械学会年次大会講演会（札幌）
- Place of Presentation
  北海道大学工学部（北海道・札幌市北区）
- Year and Date
  2015-09-13
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 新しい三角形き裂先端要素の開発と単一モード平板き裂問題への適用2014
- Author(s)
  才本明秀
- Organizer
  日本機械学会九州支部　総会講演会
- Place of Presentation
  九州工業大学工学部（福岡県戸畑区仙水町）
- Data Source
  KAKENHI-PROJECT-25420023
[Presentation] 体積力法による切欠試験片の非線形弾性解析2014
- Author(s)
  伊野拓一郎、才本明秀
- Organizer
  日本機械学会　支部総会講演会
- Place of Presentation
  九州工業大学（北九州市）
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] 新しい三角形き裂先端要素の開発と単一モード平板き裂問題への適用2014
- Author(s)
  才本明秀
- Organizer
  日本機械学会　支部総会講演会
- Place of Presentation
  九州工業大学（北九州市）
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] BFM Analysis of Planner Elliptical Cracks using Triangular Elements2014
- Author(s)
  Hasib Md. Abdul、才本明秀
- Organizer
  日本機械学会　支部総会講演会
- Place of Presentation
  九州工業大学（北九州市）
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] Evaluation of 3D Crack Interaction by BFM2013
- Author(s)
  Hasib Md. Abdul、才本明秀
- Organizer
  日本機械学会　第26回計算力学講演会
- Place of Presentation
  佐賀大学（佐賀市）
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] CRITERION OF MIXED-MODE 3D CRACK GROWTH UNDER 3PB FATIGUE LOAD2012
- Author(s)
  Zhao, X. L., Saimoto, A., et al
- Organizer
  JSSUME2012
- Place of Presentation
  Nagasaki/Japan
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] INTERFERENCE EFFECT BETWEEN CAVITIES IN AN INFINITE SOLID UNDER TENSION2012
- Author(s)
  Has ib Md. A, Saimoto, et Al
- Organizer
  JSSUME2012
- Place of Presentation
  Nagasaki/Japan
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] The reason why the strength of shallow notch specimen is not controlled by maximum stress at notch root (Physical consideration on Griffith s Query)2012
- Author(s)
  Nisitani, H. and Saimoto, A
- Organizer
  JSSUME2012
- Place of Presentation
  N agasaki/Japan
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] ESTIMATION OF THE FIRING DIRECTION OF HANDGUN BULLET BASED ON THE DAMAGE REMAINED AT AUTOMOBILE WINDSHIELD2012
- Author(s)
  Hi rakawa, S, Saimoto, A. and Ishimatsu T.
- Organizer
  JSSUME2012
- Place of Presentation
  Nagasaki/Japan
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] STRESS ANALYSYS FOR GENERAL 2D INCLUSION PROBLEMS BY EMBEDDED FORCE DOUBLET2012
- Author(s)
  Ueno, S., Saimoto, A., et al
- Organizer
  JSSUME2012
- Place of Presentation
  Nagasaki/J apan
- Data Source
  KAKENHI-PROJECT-24360182
[Presentation] 予加熱による熱応力割断速度の向上2009
- Author(s)
  久保田慎一, 今井康文, 才本明秀, 本村文孝
- Organizer
  日本機械学会九州支部第62期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 熱応力割断の効率化に関する研究2009
- Author(s)
  林田宏樹, 今井康文, 才本明秀, 本村文孝
- Organizer
  日本機械学会九州支部第62期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 熱応力割断におけるき裂初生に関する研究2009
- Author(s)
  田尻健太郎, 今井康文, 才本明秀, 本村文孝
- Organizer
  日本機械学会九州支部第62期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] Analysis of weld induced plasticity by body forth method2008
- Author(s)
  A. Saimoto, J. M. Bromley, D. J. Smith, C. E. Truman, H. Nisitani
- Organizer
  Joint Symposium between Sister Universities on Mechanical Engineering, JSSUME2008
- Place of Presentation
  Shizuoka, Japan
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 熱応力割断におけるき裂の交差進展の動的解析2008
- Author(s)
  楠田朋之, 今井康文, 才本明秀
- Organizer
  日本機械学会九州支部第61期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 熱応力割断加工におけるき裂進展経路の制御法の研究2008
- Author(s)
  中島明, 今井康文, 才本明秀, 本村文孝
- Organizer
  日本機械学会九州支部第61期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] Versatile analysis of limited plasticity by body force method2008
- Author(s)
  A. Saimoto, Y. Imai
- Organizer
  Asian Conference on Mechanics of Functional Materials and structures
- Place of Presentation
  Matue, Japan
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] ひずみ情報に基づくファスナーのしめしろ推定2008
- Author(s)
  吉弘真也, 今井康文, 才本明秀本村文孝
- Organizer
  日本機械学会九州支部第61期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] High speed thermal stress cleaving by moving heat with mist cool2008
- Author(s)
  S. Kubota. A. Saimoto, Y. Imai
- Organizer
  Asian Conference on Mechanics of Functional Materials and structures
- Place of Presentation
  Matue, Japan
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] Improvement of cutting velocity in thermal stress cleaving by mist cooling2008
- Author(s)
  S. Kubota, A. Saimoto, Y. Imai
- Organizer
  Joint Symposium between Sister Universities on Mechanical Engineering, JSSUME2008
- Place of Presentation
  Shizuoka, Japan
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 小規模塑性解析における転位分布法と体積力法の比較2008
- Author(s)
  才本明秀, 今井康文, 本村文孝
- Organizer
  日本機械学会九州支部第61期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 熱応力割断における冷却による表面き裂の生成2008
- Author(s)
  本村文孝, 今井康文, 才本明秀
- Organizer
  日本機械学会九州支部第61期総会講演会
- Place of Presentation
  九州大学
- Data Source
  KAKENHI-PROJECT-19360205
[Presentation] 球かと円板状き裂の解析
- Author(s)
  Hasib Md. Abdul、才本明秀
- Organizer
  日本機械学会　M&M2013 材料力学カンファレンス
- Place of Presentation
  岐阜大学（岐阜市）
- Data Source
  KAKENHI-PROJECT-24360182

1. MATSUDA Hiroshi (20157324)

# of Collaborated Projects: 8 results

# of Collaborated Products: 0 results
2. MORITA Chihiro (60230124)

# of Collaborated Projects: 8 results

# of Collaborated Products: 0 results
3. NAKAMURA Shozo (40315221)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
4. DEMIZU Akira (00533308)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
5. ITO Yukihiro (90223198)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. MOTOMURA Fumitaka (40274625)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
7. MAKINO Kouhei (80568478)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. SAKIYAMA Takeshi (30039664)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. MORIYAMA Masao (00240911)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. HUANG Mei (00346933)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. OKUMATSU Toshihiro (30346928)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. HARADA Tetsuo (50136636)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. SAGAWA Yasutaka (10325508)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
14. YAMAGUCHI Kohei (60336013)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
15. ICHIMIYA Kazuo (00176306)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
16. IMAI Yasufumi (50039682)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
17. OKAMOTO Takuji

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
18. YAMSHITA Tsutomu (90404243)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. GODA Hiroki (20346860)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. SOEDA Masashi (50148871)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. UCHINO Masakazu (30416507)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. AOKI Takayoshi (10202467)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. KIMURA Kichiro (50242003)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. KAWAMURA Shinichi (70315224)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. KOYAMA Atsuhiro (40324800)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
26. TAKASE Toru (50171442)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. OKUMURA Tetsuya (10380817)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. HAMADA Hidenori (70344314)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
29. FUJIGAKI Motoharu (40273875)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. NISHIKAWA Takafumi (50512076)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. NISITANI Hironobu (20037708)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. GOTOH Nobuyuki (20100894)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. 日比野誠 (90313569)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. 安武敦子 (60366432)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. 竹野哲也 (30320138)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
36. 古賀掲維 (60284709)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
37. MIYAMOTO Noriyuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
38. TAKAHASHI Yoichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
39. HIDA Kenichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
40. KAWAMURA Junichi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
41. HARADA Koji

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
42. TIMOTHY Nyomboi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
43. ZHAO Cheng

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
44. ANDOH Yuki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
45. TOYOOKA Satoru

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
46. UEHAN Fumiaki

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
47. TSURUTA OZAWA Ken

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

SAIMOTO Akihide 才本 明秀

Research Projects

Research Products

Co-Researchers

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of super strong planar surface by controling a 3D crack propagationPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Elucidation and realization of laser planing technique based on 3D crack growth analysisPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Clarification of the mechanism of crack initiation and propagation in composite materials by non-contact optical full-field measurement and smoothed particle applied mechanicsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

熱応力割断におけるき裂伝ぱ経路の制御に関する研究Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

SAIMOTO Akihide 才本明秀