• Search Research Projects
  • Search Researchers
  • How to Use
  1. Back to previous page

Horita Zenji  堀田 善治

ORCIDConnect your ORCID iD *help
… Alternative Names

HORITA Zenji  堀田 善治

掘田 善治  ホリタ ゼンジ

堀田 善冶  ホリタ ゼンジ

Less
Researcher Number 20173643
Other IDs
External Links
Affiliation (Current) 2022: 熊本大学, 先進マグネシウム国際研究センター, 特任教授
2022: 佐賀大学, シンクロトロン光応用研究センター, 特命教授
2022: 九州工業大学, 大学院工学研究院, 特任教授
Affiliation (based on the past Project Information) *help 2020 – 2022: 熊本大学, 先進マグネシウム国際研究センター, 特任教授
2019 – 2022: 九州工業大学, 大学院工学研究院, 特任教授
2016 – 2018: 九州大学, 工学研究院, 教授
2017: 九州大学, 大学院工学研究院, 教授
2011 – 2015: 九州大学, 工学(系)研究科(研究院), 教授 … More
2014: 九州大学, 大学院工学研究院, 教授
2006 – 2011: 九州大学, 大学院・工学研究院, 教授
2010: 九州大学, 工学研究科, 教授
2009 – 2010: Kyushu University, 工学研究院, 教授
2007: 九州大学, 工学研究院, 教授
2003 – 2005: 九州大学, 工学研究院, 教授
1999: Kyushu Univ., Dpt. Mater. Sci.. & Eng., Ass. Pro., 大学院・工学研究科, 助教授
1998 – 1999: 九州大学, 工学研究科, 助教授
1990 – 1998: Kyushu University, Engineering, Associate Professor, 工学部, 助教授
1986 – 1989: Faculty of Engineering, Kyushu University, Research Associate., 工学部, 助手 Less
Review Section/Research Field
Principal Investigator
Science and Engineering / Material processing/Microstructural control engineering / Structural/Functional materials / Structural/Functional materials / Physical properties of metals / Physical properties of metals / 金属材料(含表面処理・腐食防食) / Medium-sized Section 26:Materials engineering and related fields
Except Principal Investigator
金属材料(含表面処理・腐食防食) / Structural/Functional materials / Structural/Functional materials / Science and Engineering / Medium-sized Section 26:Materials engineering and related fields
Keywords
Principal Investigator
相互拡散係数 / 金属間化合物 / 巨大ひずみ加工 / 分析電子顕微鏡 / Ni_3Al / 巨大ひずみ / NiAl / 超微細結晶粒 / 結晶・組織制御 / アルミニウム合金 … More / 単結晶作製 / 固有拡散係数 / 高密度格子欠陥 / 形状不変加工 / 格子欠陥 / 電気伝導率 / 熱伝導率 / 高圧力 / 強ひずみ加工法 / 結晶粒界 / ECAP法 / Al-Mg alloys / 超塑性 / マグネシウム合金 / Ni-Al系 / 拡散対 / X線マイクロアナライザー / エネルギー分散型X線分光器 / X線吸収補正 / 粒界拡散 / Ni / 反応拡散 / 単結晶 / 表面強化 / クライオミリング / 材料メカニックス / マルチスケール計算 / 高圧ねじり変形加工 / 臨界電流密度 / 遷移温度 / MgB_2 / 格子ひずみ / 電析 / 双晶 / 相変態 / 異相界面 / 多軸鍛造 / 粉末加工 / 電解析出 / ナノ結晶 / 調和組織材料 / 変形双晶 / 熱電材料 / Bi-Te系 / 同素変態 / 金属(Ti, Zr) / 半導体 / セラミックス / 脆性材料 / 格子占有率 / 引張り試験 / せん断試験 / ALCHEMI法 / 析出強化 / 透過電子顕微鏡 / 整合性 / Intermetallics / Britle materials / Analytical electron microscopy / Interdiffusivity / Site occupancy / Teusile test / Shear test / ALCHEMI technique / 結晶粒径微細化 / 純アルミニウム / 純銅 / アルミニウム-マグネシウム合金 / アルミニウム-ジルコニウム合金 / 微細粒組織安定性 / 結晶粒界構造 / 微細結晶粒組織 / 硬度測定 / Intense plastic straing / Grain Size refinement / Al / Cu / Al-Zr alloys / Microstructural stability / Grain boundary structure / Kirkendall界面 / 拡散対実験 / Analytical Electron microscopy / Intermetallic / Interdiffusion / Intrinsic Diffusion / Kirkendall Interface / Single Crystal / 結晶粒微細化 / スカンジウム / 延性改善 / 再結晶 / 降伏強度 / アルミニウム-マグネシウム-スカンジウム / ホールペッチの関係 / 高ひずみ速度超塑性 / severe plastic information / grain refinement / Aluminum alloys / scandium / Super plasticity / ECAP / recrystallization / adiavatic heat / 強ひずみ加工 / ねじり変形 / 超微細粒 / 引張試験 / 時効硬化 / 捻り変形 / 炭素鋼 / 時効強化 / Severe plastidc deformation / Torsion strain / Mg alloys / Al alloys / Ultrafine grain / Tensile testing / Superplasticity / Age hardening / AlーLi合金 / AlーMg合金 / 剛性率 / ヤング率 / Al固溶体合金 / 超音波エコー法 / Al-Li合金 / A-Mg合金 / 弾性係数 / Al-Li固溶体合金 / 複合則 / Al-Li alloys / shear modulus / Young's modulus / Al-base solid / solution alloys / 水素貯蔵合金 / Mg合金 / 高圧ねじり加工 / 水素結合エネルギー / 積層欠陥 / 結晶粒超微細化 / 時効析出 / 圧力因子 … More
Except Principal Investigator
金属間化合物 / TEM / 組織制御 / 微細粒 / Al合金 / 拡散 / 転位 / 電子顕微鏡 / 析出強化 / 透過電子顕微鏡 / 分析電子顕微鏡 / ECAP / ECAE / 超塑性 / 相分離 / 格子欠陥 / アルミニウム合金 / 高温強度 / 超格子転位 / 時効析出硬化 / 超耐熱合金 / diffusion / 強度 / 高速超塑性 / 再結晶 / 粒成長 / 構造・機能材料 / 強化機構 / 炭化物 / ニッケルーアルミニウムーチタン合金 / Intermetallic compound / Single crystal / Transmission electron microscopy / Carbide / 時効析出 / ペロブスカイト相 / k因子 / 外挿法 / X線吸収差法 / 吸収補正 / Precipitation hardening / 超耐熱金属間化合物 / 小型ダブルシア-試験法 / クリープ変形挙動 / intermetallics / precipitation / dislocation / coherency / strength / AEM / 靭性 / ナノ構造 / 透過型電子顕微鏡 / 3次元電子線トモグラフィ / 実用材料 / ナノセラミックス複合材料 / 走査型透過電子顕微鏡-高角環状暗視野法 / 社会基盤構造材料 / バルクナノメタル / 力学特性 / 粒界 / 延性 / 構造用金属材料 / ナノ結晶 / 超微細粒 / 結晶粒界 / 連携 / 成果発信 / 共通試料 / 急速凝固 / 粉末合金 / X線回折 / 過飽和固溶体 / 準安定相 / 超急冷 / X線回折法 / 超急冷法 / 急速凝固組織 / 急冷粉末 / Rapid solidification / Aluminum alloy / Powder alloys / X-ray analysis / supersaturated solid solution / metastable phase / 単結晶 / 金属間化合物単結晶 / 超耐熱材料 / 温度依存性 / 方位依存性 / 炭素添加化合物 / 析出炭化物 / ニッケル-アルミニウム-チタン合金 / APBエネルギ- / 析出硬化モデル / Nickl aluminide / Precipitation strengthening / High temperature strength / Super dislocation / チタンーアルミニウム合金 / 窒化物 / 炭素添加合金 / 窒素添加合金 / ペロブスカイト型炭化物 / Titanium aluminide / High temperature structural material / Microstucture-control / Age precipitation / Nitride / Perovskite / 微細組織制御 / 計算機支援 / Ni-Al-Ta系3元合金 / Ni-Al2元系 / 拡散対 / 微細組織 / 分析電顕X線分析法 / ALCHEMI法 / パ-ソナル・コンピュ-タ・システム / 拡散対実験 / Analytical Electron Microscopy / Microstructure-Control / K Factor / New Extrapolation Method / Computer-Assisted Extrapolation Method / Ni-Al-Ta Ternary Alloy / Ni-Al Binary System / Diffusion-Couple / 耐熱構造材料 / 高分解能電子顕微鏡 / 収束電子線回折 / 高温クリープ変形 / 格子占有率 / ホイスラ-相 / 相互拡散係数 / Intermetallics / Heat Resistance Alloys / High Regalution Electron microscopy / Analytical electron microscopy / Canugent-Beam Elecron Diffraction / High-tenpeatare creep deformation / Site Occuponny / Submicrometer-grained / クリープ / 微細析出相 / 時効硬化 / 引力型相互作用 / 整合性 / B2型金属間化合物 / 拡散接合 / 表面活性化 / 異相界面 / 粒界拡散 / 表面活性化接合法 / 相成長 / 組成分析 / 接合 / EDS / 界面転位 / analytical electron microscopy / diffusion bonding / surface activation / lattice defect / interphase interface / fine-grain / grain boundary diffusion / 組織変化 / Al系合金 / 拘束ひずみ / 組織設計 / superplasticity / equal-channel angular pressing / microstructural evolution / ultrafine grain sizes / aluminum alloys / intense straining / grain growth / Al-Li合金 / ぜい性 / 水素チャージ / 低温変形 / 破壊 / SIMS / 偏析 / 規則粒子 / Al alloy / Al-Li alloy / hydrogen charging / fracture / SIMS analysis / segregation / hydrogen embrittlement / EDS定量分析 / Ni基二元合金 / Ni-Al-Ta合金状態図 / Ni-Al-Mo三元合金 / Ni-Al-Ta三元合金 / Al-X二元合金 / イオンミリング / 特性X線強度比 / 膜厚測定 / ニッケル合金状態図 / 合金元素の分配 / Analytical electron microscope / Quantitative microanalysis / Extrapolation method / Differential X-ray absorption method / k-factor / Ion-milling / 高分解能像 / ニックル-アルミニウム-チタン合金 / 析出硬化 / 塑性変形機構 / APBエネルギー / 硬化モデル / 塑性変形挙動 / Nickel-aluminium-titanium alloy / Coherency / EDS microanalysis / Antiphase energy / 水素 / 水素分離・精製 / 材料加工・処理 / 燃料電池 / 金属物性 / 水素透過 / スモールパンチ / 巨大ひずみ / Mg合金 / 高強度 / 高熱伝導 / 不燃性 / 高耐食性 / マグネシウム合金 Less
  • Research Projects

    (36 results)
  • Research Products

    (360 results)
  • Co-Researchers

    (67 People)
  •  トップレベルのマルチ機能を有する革新的構造用マグネシウム合金の開発

    • Principal Investigator
      河村 能人
    • Project Period (FY)
      2020 – 2023
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Review Section
      Medium-sized Section 26:Materials engineering and related fields
    • Research Institution
      Kumamoto University
  •  圧力制御を取り入れた軽量超強度合金の創出Principal Investigator

    • Principal Investigator
      堀田 善治
    • Project Period (FY)
      2019 – 2022
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Review Section
      Medium-sized Section 26:Materials engineering and related fields
    • Research Institution
      Kyushu Institute of Technology
  •  Development of High Performance Mg2Ni Hydrogen Storage Alloy with Nano-Grained StructurePrincipal Investigator

    • Principal Investigator
      Horita Zenji
    • Project Period (FY)
      2015 – 2016
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Kyushu University
  •  Creation of Hydrogen Separation Membranes by High Pressure Allotropic Microstructure Control and its Application to Low Temperature Operating Membranes with Synergistic Effect

    • Principal Investigator
      MATSUMOTO Yoshihisa
    • Project Period (FY)
      2015 – 2017
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Oita National College of Technology
  •  Microstructual Control Using High-Pressure AllotropyPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      2014 – 2018
    • Research Category
      Grant-in-Aid for Scientific Research (S)
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Kyushu University
  •  Development of High-Performance Thermoelectric Materials through Grain Refinement and Texture EnhancementPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      2013 – 2014
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Material processing/Microstructural control engineering
    • Research Institution
      Kyushu University
  •  Management of Collaborative Research Works within the Bulk Nanostructure Metals Project

    • Principal Investigator
      TSUJI Nobuhiro
    • Project Period (FY)
      2010 – 2015
    • Research Category
      Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
    • Review Section
      Science and Engineering
    • Research Institution
      Kyoto University
  •  Production of Well-Controlled Bulk-Nanostructured MetalsPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      2010 – 2014
    • Research Category
      Grant-in-Aid for Scientific Research on Innovative Areas (Research in a proposed research area)
    • Review Section
      Science and Engineering
    • Research Institution
      Kyushu University
  •  巨大ひずみ加工を利用した超伝導特性の向上Principal Investigator

    • Principal Investigator
      堀田 善治
    • Project Period (FY)
      2009 – 2010
    • Research Category
      Grant-in-Aid for Challenging Exploratory Research
    • Research Field
      Structural/Functional materials
    • Research Institution
      Kyushu University
  •  Three-dimensional nanostructural characterization of materials by electron tomography

    • Principal Investigator
      KANEKO Kenji
    • Project Period (FY)
      2007 – 2009
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      Kyushu University
  •  Production of Advanced Materials Containing High Density Lattice Defects by Precise-Controlled Giant Straining ProcessPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      2006 – 2008
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Review Section
      Science and Engineering
    • Research Institution
      Kyushu University
  •  Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice DefectsPrincipal Investigator

    • Principal Investigator
      堀田 善治
    • Project Period (FY)
      2006 – 2009
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Review Section
      Science and Engineering
    • Research Institution
      Kyushu University
  •  Development of High Strength Metallic Materials Controlled for Nanostructure Using Severe Plastic DeformationPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      2003 – 2005
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  Ni/NiAl拡散対を利用したNi_3Al単結晶の創製Principal Investigator

    • Principal Investigator
      堀田 善治
    • Project Period (FY)
      1999
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas (A)
    • Research Institution
      Kyushu University
  •  Formation Mechanism of Ultrafine-Grained Structure by ECAPPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      1998 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  拘束強せん断変形法による結晶粒の超微細化機構の解析

    • Principal Investigator
      根本 實
    • Project Period (FY)
      1997
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Research Institution
      Kyushu University
  •  分析電子顕微鏡を用いた固有拡散係数測定法の開発Principal Investigator

    • Principal Investigator
      堀田 善治
    • Project Period (FY)
      1997
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Research Institution
      Kyushu University
  •  組織制御としての金属間化合物中の相分離の特異性

    • Principal Investigator
      根本 實
    • Project Period (FY)
      1997
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Research Institution
      Kyushu University
  •  Analytical Electron Microscope Study of Low Temperature Diffusion Couples

    • Principal Investigator
      OH-ISHI Keiichiro, 根本 實
    • Project Period (FY)
      1997 – 1999
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  FABRICATION OF HIGH STRAIN RATE SUPERPLASTIC ALLOYS USING INTENSE PLASTIC STRAINING

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1997 – 1998
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  ECAP法による超微細粒合金の組織と力学特性

    • Principal Investigator
      根本 実
    • Project Period (FY)
      1996
    • Research Category
      Grant-in-Aid for Scientific Research on Priority Areas
    • Research Institution
      Kyushu University
  •  Measerement of Intrinsic Diffusion Confficients in Intevrmtallics using Analytical Electon MicroscopyPrincipal Investigator

    • Principal Investigator
      MORITA Zenji
    • Project Period (FY)
      1996 – 1997
    • Research Category
      Grant-in-Aid for Scientific Research (C)
    • Research Field
      Physical properties of metals
    • Research Institution
      KYUSHU UNIVERSITY
  •  DEVELOPEMENT OF MICROSTRUCTURE-CONTROLLED B2-ORDERED HIGH TEMPERATURE INTERMETALLICS

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  Development of Ultrafine-Grained Metallic Materials Using Intense Plastic Straining TechniquePrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      1995 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (B)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  HREM Study of high temperature metals and ceramics

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1994 – 1995
    • Research Category
      Grant-in-Aid for international Scientific Research
    • Research Institution
      KYUSHU UNIVERSITY
  •  BEHAVIOR OF LATTICE DEFECTS IN MICROSTRUCTURE-CONTROLLED INTERMETALLICS

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1994 – 1996
    • Research Category
      Grant-in-Aid for Scientific Research (A)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  Development of microstructural observation technique for lessductile materials deformed in tensionPrincipal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      1993 – 1994
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Structural/Functional materials
    • Research Institution
      KYUSHU UNIVERSITY
  •  分析電子顕微鏡による低温域拡散係数の測定Principal Investigator

    • Principal Investigator
      堀田 善治
    • Project Period (FY)
      1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      Physical properties of metals
    • Research Institution
      Kyushu University
  •  Generalization of X-ray microanalysis in analytical electron microscopy and its application to microstructure-controlled materials

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1991 – 1992
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      KYUSHU UNIVERSITY
  •  Strength and toughness of L1_0-type intermetallic TiAl with duplex structure.

    • Principal Investigator
      SANO Takeshi
    • Project Period (FY)
      1990 – 1991
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University
  •  Microstructure Analysis of Rapidly Solidified Aluminum-Transition Element Alloys

    • Principal Investigator
      MIURA Yasuhiro
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University
  •  Development of Microstructure-controlled L1_2-type High Temperature Intermetallics

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1989 – 1990
    • Research Category
      Grant-in-Aid for Developmental Scientific Research (B).
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University
  •  Quantitative microanalysis in the analytical electron microscope and its application to the construction of alloy phase diagrams.

    • Principal Investigator
      NEMOTO Minoru
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for General Scientific Research (B)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University
  •  Elastic Modulus of Al-Li Alloys.Principal Investigator

    • Principal Investigator
      HORITA Zenji
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University
  •  Plastic deformation behavior of Ll_2 type intermetallic compound containing precipitate phase.

    • Principal Investigator
      SANO Takeshi
    • Project Period (FY)
      1987 – 1988
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University
  •  Grain Boundary Segregation and Fracture in Al-Li Alloy.

    • Principal Investigator
      MIURA Yasuhiro
    • Project Period (FY)
      1985 – 1986
    • Research Category
      Grant-in-Aid for General Scientific Research (C)
    • Research Field
      金属材料(含表面処理・腐食防食)
    • Research Institution
      Kyushu University

All 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 Other

All Journal Article Presentation Book Patent

  • [Book] SIGNIFICANCE OF SEVERE PLASTIC DEFORMATION (SPD) FOR PRODUCTION OF BIOMEDICAL AND BIOCOMPATIBLE MATERIALS2018

    • Author(s)
      Kaveh Edalati, Yoshifumi Ikoma, Zenji Horita
    • Total Pages
      45
    • Publisher
      IRC-GSAM Press
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Book] Promoting Advanced Energy Materials by SPD and Phase Transformation2017

    • Author(s)
      Kaveh Edalati, Yoshifumi Ikoma, Zenji Horita
    • Total Pages
      106
    • Publisher
      IRC-GSAM Press
    • ISBN
      9784944005246
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Book] Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015) “Exploring SPD Potential: Innovative Approach for Production of High-Performance Materials”2016

    • Author(s)
      Kaveh Edalati, Yoshifumi Ikoma and Zenji Horita
    • Total Pages
      71
    • Publisher
      IRC-GSAM Press, Fukuoka
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Book] Proceedings of the International Workshop on Giant Straining Process for Advanced Materials (GSAM2015) “Exploring SPD Potential: Innovative Approach for Production of High-Performance Materials”2016

    • Author(s)
      Kaveh Edalati, Yoshifumi Ikoma and Zenji Horita
    • Total Pages
      71
    • Publisher
      IRC-GSAM Press, Fukuoka
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Book] Promoting Functionality by Severe Plastic Deformation Significance of Lattice Defects and Phase Transformation2016

    • Author(s)
      Kaveh Edalati, Yoshifumi Ikoma and Zenji Horita
    • Total Pages
      80
    • Publisher
      IRC-GSAM Press
    • ISBN
      9784944005222
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Book] Promoting Functionality by Severe Plastic Deformation Significance of Lattice Defects and Phase Transformation2016

    • Author(s)
      Kaveh Edalati, Yoshifumi Ikoma and Zenji Horita
    • Total Pages
      80
    • Publisher
      IRC-GSAM, Kyushu University
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Book] Production of Multifunctional Materials Using Severe Pastic Deformation2011

    • Author(s)
      Zenji Horita
    • Total Pages
      108
    • Publisher
      Kyushu University Press
    • Data Source
      KAKENHI-PROJECT-21656176
  • [Book] Production of Multifunctional Materials Using Severe Pastic Deformation2011

    • Author(s)
      Zenji Horita
    • Total Pages
      108
    • Publisher
      Kyushu University Press
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Book] Nanomaterials by Severe Plastic Deformation2006

    • Author(s)
      Zenji Horita
    • Total Pages
      1030
    • Publisher
      Trans Tech Publications
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Book] Nanomaterials by Severe Plastic Deformation2006

    • Author(s)
      Edited by Z. Horita
    • Publisher
      Trans Tech. Publications LTD.
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Book] Severe Plastic Deformation2006

    • Author(s)
      Z. Horita
    • Publisher
      Trans Tech. Publications LTD. Switzerland
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Book] Ultrafine Grained Materials IV2006

    • Author(s)
      Edited by Y.T. Zhu, T.G. Langdon, Z. Horita, M.J. Zehetbauer, S. L Semiatin, T.C. Lowe
    • Publisher
      The Mineral, Metals &Materials Society
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Book] Nanomaterials by Severe Plastic Deformation2006

    • Author(s)
      Z.Horita
    • Total Pages
      1030
    • Publisher
      Trans Tech Publications
    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Book] Ultrafine Grained Materials IV2006

    • Author(s)
      Y.T. Zhu, T.G. Langdon, Z. Horita
    • Publisher
      The Mineral, Metals &Materials Society, USA
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Achieving superconductivity with higher Tc in lightweight Al-Ti-Mg alloys: Prediction using machine learning and synthesis via high-pressure torsion process2022

    • Author(s)
      Mito Masaki、Mokutani Narimichi、Tsuji Hiroki、Tang Yongpeng、Matsumoto Kaname、Murayama Mitsuhiro、Horita Zenji
    • Journal Title

      Journal of Applied Physics

      Volume: 131 Pages: 105903-105903

    • DOI

      10.1063/5.0086694

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Ultrafine Grain Refinement Using High-Pressure Sliding for Achievement of Superplastic Forming2022

    • Author(s)
      瀧沢 陽一、堀田 善治
    • Journal Title

      PLASTOS

      Volume: 5 Issue: 51 Pages: 137-142

    • DOI

      10.32277/plastos.5.51_137

    • ISSN
      2433-8826
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Phase transformations in Al-Ti-Mg powders consolidated by high-pressure torsion: experiments and first-principles calculations2022

    • Author(s)
      Tang Yongpeng、Murayama Mitsuhiro、Edalati Kaveh、Wang Qing、Iikubo Satoshi、Masuda Takahiro、Higo Yuji、Tange Yoshinori、Ohishi Yasuo、Mito Masaki、Horita Zenji
    • Journal Title

      Journal of Alloys and Compounds

      Volume: 889 Pages: 161815-161815

    • DOI

      10.1016/j.jallcom.2021.161815

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PUBLICLY-21H00103, KAKENHI-PUBLICLY-21H00150, KAKENHI-PROJECT-19H00830, KAKENHI-PROJECT-19H02029, KAKENHI-PROJECT-20H02479, KAKENHI-PROJECT-19J01767, KAKENHI-PROJECT-21K14436
  • [Journal Article] Continuous high-pressure torsion of pure Al and Al-Fe alloy using multi-wires2021

    • Author(s)
      Masuda Takahiro、Hirosawa Shoichi、Horita Zenji
    • Journal Title

      Journal of Materials Science

      Volume: 56 Pages: 8679-8688

    • DOI

      10.1007/s10853-020-05484-8

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19J01767, KAKENHI-PROJECT-19K15324, KAKENHI-PROJECT-19H00830
  • [Journal Article] <i>In Situ</i> Synchrotron X-ray Analysis: Application of High-Pressure Sliding Process to Ti Allotropic Transformation2021

    • Author(s)
      Horita Zenji、Maruno Daisuke、Ikeda Yukimasa、Masuda Takahiro、Tang Yongpeng、Arita Makoto、Higo Yuji、Tange Yoshinori、Ohishi Yasuo
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 62 Issue: 2 Pages: 167-176

    • DOI

      10.2320/matertrans.mt-m2020314

      10.2320/matertrans.MT-M2020314

    • NAID

      130007974693

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19J01767, KAKENHI-PROJECT-19K15324, KAKENHI-PROJECT-19H00830
  • [Journal Article] Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding2021

    • Author(s)
      Masuda Takahiro、Fujimitsu Kazushige、Sumikawa Kosei、Kajita Takahiro、Tang Yongpeng、Hirosawa Shoichi、Takizawa Yoichi、Yumoto Manabu、Otagiri Yoshiharu、Horita Zenji
    • Journal Title

      Metallurgical and Materials Transactions A

      Volume: 52 Pages: 3860-3870

    • DOI

      10.1007/s11661-021-06347-w

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PUBLICLY-21H00103, KAKENHI-PROJECT-19H00830, KAKENHI-PROJECT-19J01767, KAKENHI-PROJECT-21K14436
  • [Journal Article] Complex interactions between precipitation, grain growth and recrystallization in a severely deformed Al-Zn-Mg-Cu alloy and consequences on the mechanical behavior2021

    • Author(s)
      Duchaussoy Amandine、Sauvage Xavier、Deschamps Alexis、De Geuser Frederic、Renou Gilles、Horita Zenji
    • Journal Title

      Materialia

      Volume: 15 Pages: 101028-101028

    • DOI

      10.1016/j.mtla.2021.101028

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Achieving grain refinement of upsized Al–3Mg–0.2Sc (mass%) round rods using multi-pass high-pressure sliding (MP-HPS)2020

    • Author(s)
      唐 永鵬、瀧沢 陽一、湯本 学、小田切 吉治、堀田 善治
    • Journal Title

      J. Japan Inst. Light Metals

      Volume: 70、2 Issue: 2 Pages: 63-65

    • DOI

      10.2464/jilm.70.63

    • NAID

      130007821807

    • ISSN
      0451-5994, 1880-8018
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Magnetic measurements of hydrogen desorption from palladium hydride PdH0.64 prepared by severe plastic deformation2020

    • Author(s)
      M. Mito, T. Fukuyama, Y. Kitamura, H. Deguchi, K. Edalati, Z. Horita
    • Journal Title

      Journal of Applied Physics

      Volume: 127 Pages: 215109-215109

    • DOI

      10.1063/5.0010025

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-17H03379, KAKENHI-PROJECT-19KK0070, KAKENHI-PROJECT-19H00830
  • [Journal Article] Achieving highly strengthened Al-Cu-Mg alloy by grain refinement and grain boundary segregation2020

    • Author(s)
      Masuda Takahiro、Sauvage Xavier、Hirosawa Shoichi、Horita Zenji
    • Journal Title

      Materials Science and Engineering: A

      Volume: 793 Pages: 139668-139668

    • DOI

      10.1016/j.msea.2020.139668

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19J01767, KAKENHI-PROJECT-19K15324, KAKENHI-PROJECT-19H00830
  • [Journal Article] Grain refinement and superplasticity of pipes processed by high-pressure sliding2020

    • Author(s)
      Tang Yongpeng、Matsuda Koki、Takizawa Yoichi、Yumoto Manabu、Otagiri Yoshiharu、Horita Zenji
    • Journal Title

      Materials Science and Technology

      Volume: 36 Pages: 877-886

    • DOI

      10.1080/02670836.2020.1746538

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Severe Plastic Deformation for Nanostructure Controls2020

    • Author(s)
      Horita Zenji、Edalati Kaveh
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 61 Issue: 11 Pages: 2241-2247

    • DOI

      10.2320/matertrans.mt-m2020134

      10.2320/matertrans.MT-M2020134

    • NAID

      130007930216

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Severe Plastic Deformation under High Pressure: Upsizing Sample Dimensions2020

    • Author(s)
      Horita Zenji、Tang Yongpeng、Masuda Takahiro、Takizawa Yoichi
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 61 Issue: 7 Pages: 1177-1190

    • DOI

      10.2320/matertrans.mt-m2020074

      10.2320/matertrans.MT-M2020074

    • NAID

      130007864094

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Journal Article] Mechanical properties and electrical conductivity of ultrafine-grained aluminum consolidated by high-pressure sliding2020

    • Author(s)
      Tang Yongpeng、Komatsu Takuya、Masuda Takahiro、Arita Makoto、Takizawa Yoichi、Yumoto Manabu、Otagiri Yoshiharu、Horita Zenji
    • Journal Title

      Materialia

      Volume: 14 Pages: 100916-100916

    • DOI

      10.1016/j.mtla.2020.100916

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-19J01767, KAKENHI-PROJECT-19K15324, KAKENHI-PROJECT-19H00830
  • [Journal Article] Multi-pass high-pressure sliding (MP-HPS) for grain refinement and superplasticity in metallic round rods2019

    • Author(s)
      Tang Yongpeng、Sumikawa Kosei、Takizawa Yoichi、Yumoto Manabu、Otagiri Yoshiharu、Horita Zenji
    • Journal Title

      Materials Science and Engineering: A

      Volume: 748 Pages: 108-118

    • DOI

      10.1016/j.msea.2019.01.071

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Grain refinement of AZ31 Mg Alloy through Room Temperature Processing by UP-Scaled High-Pressure Torsion2019

    • Author(s)
      Masuda Takahiro、Horita Zenji
    • Journal Title

      Materials Transactions

      Volume: 印刷中

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Low-temperature anatase-to-rutile phase transformation and unusual grain coarsening in titanium oxide nanopowders by high-pressure torsion straining2019

    • Author(s)
      Edalati Kaveh、Wang Qing、Razavi-Khosroshahi Hadi、Emami Hoda、Fuji Masayoshi、Horita Zenji
    • Journal Title

      Scripta Materialia

      Volume: 162 Pages: 341-344

    • DOI

      10.1016/j.scriptamat.2018.11.044

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Microstructure and phase transformations of silica glass and vanadium oxide by severe plastic deformation via high-pressure torsion straining2019

    • Author(s)
      Edalati Kaveh、Fujita Ikuro、Sauvage Xavier、Arita Makoto、Horita Zenji
    • Journal Title

      Journal of Alloys and Compounds

      Volume: 779 Pages: 394-398

    • DOI

      10.1016/j.jallcom.2018.11.086

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles2019

    • Author(s)
      Duchaussoy Amandine、Sauvage Xavier、Edalati Kaveh、Horita Zenji、Renou Gilles、Deschamps Alexis、F. De Geuser
    • Journal Title

      Acta Materialia

      Volume: 167 Pages: 89-102

    • DOI

      10.1016/j.actamat.2019.01.027

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] "Hydrostatic pressure effects on superconducting transition of nanostructured niobium highly strained by high-pressure torsion "2019

    • Author(s)
      M. Mito, Y. Kitamura, T. Tajiri, K. Nakamura, R. Shiraishi, K. Ogata, H. Deguchi, T. Yamaguchi, N. Takeshita, T. Nishizaki, K. Edalati, Z. Horita
    • Journal Title

      Journal of Applied Physics

      Volume: 125 Pages: 125901-125901

    • DOI

      10.1063/1.5083094

    • NAID

      120006604494

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K05452, KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-17H03379, KAKENHI-PROJECT-16K05460, KAKENHI-PROJECT-19K03673, KAKENHI-PROJECT-16H06345
  • [Journal Article] Impact of TiO2-II Phase Stabilized in Anatase Matrix by High Pressure Torsion on Electrocatalytic Hydrogen Production2019

    • Author(s)
      Edalati Kaveh、Wang Qing、Eguchi Hiroto、Razavi-Khosroshahi Hadi、Emami Hoda、Yamauchi Miho、Fuji Masayoshi、Horita Zenji
    • Journal Title

      Mater. Res. Lett.

      Volume: 7 Pages: 334-339

    • DOI

      10.1080/21663831.2019.1609111

    • NAID

      120006844839

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PLANNED-18H05517
  • [Journal Article] High-pressure torsion of iron with various purity levels and validation of Hall-Petch strengthening mechanism2019

    • Author(s)
      Tejedor Robert、Edalati Kaveh、Benito Jose Antonio、Horita Zenji、Cabrera Jose Maria
    • Journal Title

      Materials Science and Engineering: A

      Volume: 743 Pages: 597-605

    • DOI

      10.1016/j.msea.2018.11.127

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Impact of metastable phases on electrical properties of Si with different doping concentrations after processing by high-pressure torsion2018

    • Author(s)
      Chon Bumsoo、Ikoma Yoshifumi、Kohno Masamichi、Shiomi Junichiro、McCartney Martha R.、Smith David J.、Horita Zenji
    • Journal Title

      Scripta Materialia

      Volume: 157 Pages: 120-123

    • DOI

      10.1016/j.scriptamat.2018.08.011

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-18H01384
  • [Journal Article] Transition from poor ductility to room-temperature superplasticity in a nanostructured aluminum alloy2018

    • Author(s)
      Edalati Kaveh、Horita Zenji、Valiev Ruslan Z.
    • Journal Title

      Scientific Reports

      Volume: 8 Pages: 6740-6740

    • DOI

      10.1038/s41598-018-25140-1

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Combination of High-Pressure Torsion with Incremental Feeding for Upsizing Sample2018

    • Author(s)
      Shigeno Etsuko、Komatsu Takuya、Sumikawa Kosei、Masuda Takahiro、Takizawa Yoichi、Yumoto Manabu、Otagiri Yoshiharu、Horita Zenji
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 59 Issue: 6 Pages: 1009-1012

    • DOI

      10.2320/matertrans.m2018039

      10.2320/matertrans.M2018039

    • NAID

      130006744116

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] Hydrolytic Hydrogen Production on Al?Sn?Zn Alloys Processed by High-Pressure Torsion2018

    • Author(s)
      Zhang Fan、Edalati Kaveh、Arita Makoto、Horita Zenji
    • Journal Title

      Materials

      Volume: 11 Pages: 1209-1209

    • DOI

      10.3390/ma11071209

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] New Mg–V–Cr BCC Alloys Synthesized by High-Pressure Torsion and Ball Milling2018

    • Author(s)
      Fujiwara Keisuke、Uehiro Ryoko、Edalati Kaveh、Li Hai-Wen、Floriano Ricardo、Akiba Etsuo、Horita Zenji
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 59 Issue: 5 Pages: 741-746

    • DOI

      10.2320/matertrans.m2018001

      10.2320/matertrans.M2018001

    • NAID

      130006725929

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16H04539
  • [Journal Article] Crystal and electronic structural changes during annealing in severely deformed Si containing metastable phases formed by high-pressure torsion2018

    • Author(s)
      Ikoma Yoshifumi、Chon Bumsoo、Yamasaki Terumasa、Takahashi Kazutoshi、Saito Katsuhiko、Guo Qixin、Horita Zenji
    • Journal Title

      Applied Physics Letters

      Volume: 113 Pages: 101904-101904

    • DOI

      10.1063/1.5038160

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Effect of gradient-structure versus uniform nanostructure on hydrogen storage of Ti-V-Cr alloys: investigation using ultrasonic SMAT and HPT processes2018

    • Author(s)
      K. Edalati, M. Novelli, S. Itano, H.W.Li, E. Akiba, Z. Horita, T. Grosdidier
    • Journal Title

      Journal of Alloys and Compounds

      Volume: 737 Pages: 337-346

    • DOI

      10.1016/j.jallcom.2017.12.053

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16H04539
  • [Journal Article] Microstructure and creep behaviour of P92 steel after HPT2018

    • Author(s)
      P. Kral, J. Dvorak, V. Sklenicka, T. Masuda, Z. Horita, K. Kucharova, M.Kvapilova, M. Svobodova
    • Journal Title

      Materials Science and Engineering A

      Volume: 723 Pages: 287-295

    • DOI

      10.1016/j.msea.2018.03.059

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] Incremental Feeding High-Pressure Sliding for Achieving Large Area of Severe Plastic Deformation2018

    • Author(s)
      Y. Takizawa, K.Watanabe, T. Kajita, K. Sumikawa, T. Masuda, M. Yumoto, Y. Otagiri, Z. Horita
    • Journal Title

      J. Japan Inst. Metals

      Volume: 82 Issue: 1 Pages: 25-31

    • DOI

      10.2320/jinstmet.j2017038

      10.2320/jinstmet.J2017038

    • NAID

      130006279159

    • ISSN
      0021-4876, 1880-6880, 2433-7501
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] Incremental Feeding High-Pressure Sliding for Grain Refinement of Large-Scale Sheets: Application to Inconel 7182018

    • Author(s)
      Y. Takizawa, K.Sumikawa, K. Watanabe, M. Yumoto, Y. Kanai, Y. Otagiri, Z. Horita
    • Journal Title

      Metallurgical and Materials Transactions A

      Volume: 49 Pages: 1830-1840

    • DOI

      10.1007/s11661-018-4534-2

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] High-pressure torsion for new hydrogen storage materials2018

    • Author(s)
      K. Edalati, E. Akiba, Z. Horita
    • Journal Title

      Science and Technology of Advanced Materials

      Volume: 19 Pages: 185-193

    • DOI

      10.1080/14686996.2018.1435131

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H04539, KAKENHI-PROJECT-26220909
  • [Journal Article] 巨大ひずみの利用と効用2018

    • Author(s)
      堀田善治
    • Journal Title

      學士會会報

      Volume: 930 Pages: 71-76

    • NAID

      40021618522

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Low-Temperature and High-Strain-Rate Superplasticity of Ultrafine-Grained A7075 Processed by High-Pressure Torsion2018

    • Author(s)
      Lee Seungwon、Watanabe Katsumi、Matsuda Kenji、Horita Zenji
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 59 Issue: 8 Pages: 1341-1347

    • DOI

      10.2320/matertrans.l-m2018825

      10.2320/matertrans.L-M2018825

    • NAID

      130007418729

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Grain growth in nanograined aluminum oxide by high-pressure torsion: Phase transformation and plastic strain effects2018

    • Author(s)
      I. Fujita, K. Edalati, X. Sauvage, Z. Horita
    • Journal Title

      Scripta Materialia

      Volume: 152 Pages: 11-14

    • DOI

      10.1016/j.scriptamat.2018.04.003

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Effect of Temperature Rise on Microstructural Evolution during High-Pressure Torsion2018

    • Author(s)
      K. Edalati, Y. Hashiguchi, P. H. R. Pereira, Z. Horita, T. G. Langdon
    • Journal Title

      Materials Science and Engineering A

      Volume: 714 Pages: 167-171

    • DOI

      10.1016/j.msea.2017.12.095

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Production of superplastic Ti–6Al–7Nb alloy using high-pressure sliding process2018

    • Author(s)
      K. Watanabe, M. Ashida, T. Masuda, P. Kral, Y. Takizawa, M. Yumoto, Y. Otagiri, V. Sklenicka, T. Hanawa, Z. Horita
    • Journal Title

      J. Japan Inst. Light Metals

      Volume: 68 Issue: 1 Pages: 9-15

    • DOI

      10.2464/jilm.68.9

    • NAID

      130006405254

    • ISSN
      0451-5994, 1880-8018
    • Language
      Japanese
    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] The Effect of Ultrafine-Grained Microstructure on Creep Behaviour of 9% Cr Steel2018

    • Author(s)
      Kral Petr、Dvorak Jiri、Sklenicka Vaclav、Masuda Takahiro、Horita Zenji、Kucharova Kveta、Kvapilova Marie、Svobodova Marie
    • Journal Title

      Materials

      Volume: 11 Pages: 787-787

    • DOI

      10.3390/ma11050787

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] Bulk nanocrystalline gamma magnesium hydride with low dehydrogenation temperature stabilized by plastic straining via high-pressure torsion2018

    • Author(s)
      Edalati Kaveh、Kitabayashi Kouki、Ikeda Yuji、Matsuda Junko、Li Hai-Wen、Tanaka Isao、Akiba Etsuo、Horita Zenji
    • Journal Title

      Scripta Materialia

      Volume: 157 Pages: 54-57

    • DOI

      10.1016/j.scriptamat.2018.07.043

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16H04539
  • [Journal Article] Combination of High-Pressure Torsion with Incremental Feeding for Upsizing Sample2018

    • Author(s)
      E. Shigeno, T. Komatsu, K. Sumikawa, T. Masuda, Y. Takizawa, M. Yumoto, Y. Otagiri, Z. Horita
    • Journal Title

      Materials Transactions

      Volume: 印刷中

    • NAID

      130006744116

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Developing high-performance light metallic materials through microstructural refinement using severe plastic deformation2018

    • Author(s)
      Horita Zenji
    • Journal Title

      J. Japan Inst. Light Metals

      Volume: 68 Issue: 8 Pages: 407-417

    • DOI

      10.2464/jilm.68.407

    • NAID

      130007537916

    • ISSN
      0451-5994, 1880-8018
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Effect of high-pressure torsion on grain refinement and strength enhancement and uniform ductility of EZ magnesium alloy2018

    • Author(s)
      K. Bryta, J. Morgiel, M. Faryna, K. Edalati, Z. Horita
    • Journal Title

      Materials Letters

      Volume: 212 Pages: 323-326

    • DOI

      10.1016/j.matlet.2017.10.113

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Design and synthesis of a magnesium alloy for room temperature hydrogen storage2018

    • Author(s)
      K. Edalati, R. Uehiro, Y. Ikeda, H. W. Li, H. Emami, Y. Filinchuk, M. Arita, X. Sauvage, I. Tanaka, E. Akiba, Z. Horita
    • Journal Title

      Acta Materialia

      Volume: 149 Pages: 88-96

    • DOI

      10.1016/j.actamat.2018.02.033

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16H04539
  • [Journal Article] Room-Temperature Superplasticity in an Ultrafine-Grained Magnesium Alloy2017

    • Author(s)
      K. Edalati, T. Masuda, M. Arita, M. Furui, X. Sauvage, Z. Horita, R. Z. Valiev
    • Journal Title

      Scientific Reports

      Volume: 7 Pages: 2662-2662

    • DOI

      10.1038/s41598-017-02846-2

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] Effect of ultrafine grain refinement on hydrogen embrittlement of metastable austenitic stainless steel2017

    • Author(s)
      Y. Mine, N. Horita, Z. Horita, K. Takashima
    • Journal Title

      International Journal of Hydrogen Energy

      Volume: 42 Pages: 15415-15425

    • DOI

      10.1016/j.ijhydene.2017.04.249

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-15H02302, KAKENHI-PROJECT-16K14423
  • [Journal Article] Fabrication of high-strength and high-ductility laminated A2024 aluminum alloy/aluminum composite by severe plastic deformation under high pressure2017

    • Author(s)
      T. Masuda, Z. Horita
    • Journal Title

      J. Japan Inst. Light Metals

      Volume: 67 Issue: 5 Pages: 179-185

    • DOI

      10.2464/jilm.67.179

    • NAID

      130007314771

    • ISSN
      0451-5994, 1880-8018
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16J07050
  • [Journal Article] High-resolution transmission electron microscopy analysis of bulk nanograined silicon processed by high-pressure torsion2017

    • Author(s)
      Y. Fukushima, Y. Ikoma, K. Edalati, B. Chon, D. J. Smith, Z. Horita
    • Journal Title

      Materials Characterization

      Volume: 129 Pages: 163-168

    • DOI

      10.1016/j.matchar.2017.04.025

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Hydrogen Diffusion in Ultrafine-Grained Iron with the body-centered cubic crystal structure2017

    • Author(s)
      Hideaki Iwaoka, Makoto Arita, Zenji Horita
    • Journal Title

      Philosophical Magazine Letters

      Volume: 97 Pages: 158-168

    • DOI

      10.1080/09500839.2017.1300702

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16K18268, KAKENHI-PROJECT-15K14183
  • [Journal Article] Structural refinement of titanium-aluminium-niobium alloy for biomedical applications2017

    • Author(s)
      J. E. Gonz&aacute;lez-Hern&aacute;ndez, J. M. Cubero-Sesin, E. Ulate-Kolitsky, P. Navarro, S. Petretti, Z. Horita
    • Journal Title

      Journal of Renewable Materials

      Volume: 5 Pages: 300-306

    • DOI

      10.7569/jrm.2017.634120

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Concurrent strengthening of ultrafine-grained age-hardenable Al-Mg alloy by means of high-pressure torsion and spinodal decomposition2017

    • Author(s)
      Y. Tang, W. Goto, S. Hirosawa, Z. Horita, S. Lee, K. Matsuda, D. Terada
    • Journal Title

      Acta, Materialia

      Volume: 131 Pages: 57-64

    • DOI

      10.1016/j.actamat.2017.04.002

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS)2017

    • Author(s)
      Y. Takizawa, T. Kajita, P. Kral, T. Masuda, K. Watanabe, M. Yumoto, V. Sklenicka, Y. Otagiri, Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 682 Pages: 603-612

    • DOI

      10.1016/j.msea.2016.11.081

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Origin of the influence of Cu or Ag micro-additions on the age hardening behavior of ultrafine-grained Al-Mg-Si alloys2017

    • Author(s)
      X. Sauvage, S. Lee, K. Matsuda, Z. Horita
    • Journal Title

      Journal of Alloys and Compounds

      Volume: 710 Pages: 199-204

    • DOI

      10.1016/j.jallcom.2017.03.250

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Fast hydrolysis and hydrogen generation on Al-Bi alloys and Al-Bi-C composites synthesized by high-pressure torsion2017

    • Author(s)
      F. Zhang, K. Edalati, M. Arita, Z. Horita
    • Journal Title

      International Journal of Hydrogen Energy

      Volume: 42 Pages: 29121-29130

    • DOI

      10.1016/j.ijhydene.2017.10.057

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] High-pressure torsion of aluminum with ultrahigh purity (99.9999%) and occurrence of inverse Hall-Petch relationship2017

    • Author(s)
      Y. Ito, K. Edalati, Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 679 Pages: 428-434

    • DOI

      10.1016/j.msea.2016.10.066

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Electrical resistivity mapping of titanium and zirconium discs processed by high-pressure torsion for homogeneity and phase transformation evaluation2017

    • Author(s)
      R. Haraguchi, Y. Yoshimatsu, T. Nagaoka,*M. Arita, K. Edalati, Z. Horita
    • Journal Title

      Journal of Materials Science

      Volume: 52, 11 Pages: 6778-6788

    • DOI

      10.1007/s10853-017-0916-x

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Mechanical property and hydrogen permeability of ultrafine-grained Pd-Ag alloy processed by high-pressure torsion2017

    • Author(s)
      Hideaki Iwaoka, Tatsuya Ide, Makoto Arita, Zenji Horita
    • Journal Title

      International Journal of Hydrogen Energy

      Volume: 42 Pages: 24176-24182

    • DOI

      10.1016/j.ijhydene.2017.07.235

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16K18268, KAKENHI-PROJECT-26220909
  • [Journal Article] Contactless measurement of electrical conductivity for bulk nanostructured silver prepared by high-pressure torsion: A study of the dissipation process of giant strain2017

    • Author(s)
      M. Mito, K. Shibayama, H. Deguchi, K. Tsuruta, T. Tajiri, K. Edalati, Z. Horita
    • Journal Title

      Journal of Applied Physics

      Volume: 122 Pages: 125105-7

    • DOI

      10.1063/1.4991430

    • NAID

      120006524130

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Influence of hydrogen on dislocation self-organization in Ni2017

    • Author(s)
      S. Wang, A. Nagao, K. Edalati, Z. Horita, I. M. Robertson
    • Journal Title

      Acta Materialia

      Volume: 135 Pages: 96-102

    • DOI

      10.1016/j.actamat.2017.05.073

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] High-resolution transmission electron microscopy analysis of nanograined germanium produced by high-pressure torsion2017

    • Author(s)
      Y.Ikoma, K. Kumano, K. Edalati, M. R. McCartney, D. J. Smith, Z. Horita
    • Journal Title

      Materials Characterization

      Volume: 132 Pages: 132-138

    • DOI

      10.1016/j.matchar.2017.08.011

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Phase transformation of germanium by processing through high-pressure torsion: strain and temperature effects2017

    • Author(s)
      Y. Ikoma, K. Kumano, K. Edalati, K. Saito, Q. Guo, Z. Horita
    • Journal Title

      Philosophical Magazine Letters

      Volume: 97 Pages: 27-34

    • DOI

      10.1080/09500839.2016.1266099

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Ultra-severe plastic deformation: Evolution of microstructure, phase transformation and hardness in immiscible magnesium-based systems2017

    • Author(s)
      K. Edalati, R. Uehiro, K. Fujiwara, Y. Ikeda, H.W.Li, X. Sauvage, R.Z.Valiev, E. Akiba, I. Tanaka, Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 701 Pages: 158-166

    • DOI

      10.1016/j.msea.2017.06.076

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16H04539
  • [Journal Article] Optical Properties of Nanocrystalline Monoclinic Y2O3 Stabilized by Grain Size and Plastic Strain Effects via High-Pressure Torsion2017

    • Author(s)
      H. Razavi-Khosroshahi, K. Edalati, H. Emami, E. Akiba, Z. Horita, M. Fuji
    • Journal Title

      Inorganic Chemiistry

      Volume: 56 Pages: 2576-2580

    • DOI

      10.1021/acs.inorgchem.6b02725

    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Development of ultra high strength (1GPa) aluminum alloy using sever plastic deformation under high pressure2017

    • Author(s)
      T. Masuda, Z. Horita
    • Journal Title

      Journal of Japan Institute of Light Metals

      Volume: 67 Pages: 519-520

    • NAID

      130006230240

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Hydrogen embrittlement of ultrafine-grained austenitic stainless steels processed by high-pressure torsion at moderate temperature2016

    • Author(s)
      Yoji Mine, Daisuke Haraguchi, Takahiro Ideguchi, Nobuaki Horita, Zenji Horita, Kazuki Takashima
    • Journal Title

      Iron and Steel International Japan

      Volume: 56 Pages: 1083-1090

    • DOI

      10.2355/isijinternational.isijint-2015-664

    • NAID

      130005164510

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-25420758, KAKENHI-PROJECT-26220909
  • [Journal Article] Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion2016

    • Author(s)
      M. Isik, M. Niinomi, K. Cho, M. Nakai, H. Liu, H. Yilmazer, Z. Horita, T. Narushima
    • Journal Title

      Journal of the Mechanical Behavior of Biomedical Materials

      Volume: 59 Pages: 226-235

    • DOI

      10.1016/j.jmbbm.2015.11.015

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-16K20918
  • [Journal Article] Activation of titanium-vanadium alloy for hydrogen storage by introduction of nanograins and edge dislocations using high-pressure torsion2016

    • Author(s)
      K. Edalati, H. Shao, H. Emami, H. Iwaoka, E. Akiba, Z. Horita
    • Journal Title

      International Journal of Hydrogen Energy

      Volume: 41 Pages: 8917-8924

    • DOI

      10.1016/j.ijhydene.2016.03.146

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Journal Article] New Phases with Reversible Hydrogen Storage Capability in Immiscible Magnesium-Zirconium System Produced by High-Pressure Torsion2016

    • Author(s)
      K. Edalati, H. Emami, Y. Ikeda, H. Iwaoka, Isao Tanaka, E. Akiba, Z. Horita
    • Journal Title

      Acta Materialia

      Volume: 108 Pages: 293-303

    • DOI

      10.1016/j.actamat.2016.02.026

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-15K14183, KAKENHI-PROJECT-26220909
  • [Journal Article] Solid-state reactions and hydrogen storage in magnesium mixed with various elements by high-pressure torsion: experiments and first-principles calculations2016

    • Author(s)
      H. Emami, K. Edalati, A. Staykov, T. Hongo, H. Iwaoka, Z. Horita, E. Akiba
    • Journal Title

      Society of Chemistry (RCS) Advances

      Volume: 6 Pages: 11665-11674

    • DOI

      10.1039/c5ra23728a

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183, KAKENHI-PROJECT-26220909
  • [Journal Article] Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations2016

    • Author(s)
      K. Edalati, D. J. Lee, T. Nagaoka, M. Arita, H. S. Kim, Z. Horita, R. Pippan
    • Journal Title

      MATERIALS TRANSACTIONS

      Volume: 57 Issue: 4 Pages: 533-538

    • DOI

      10.2320/matertrans.m2015374

      10.2320/matertrans.M2015374

    • NAID

      130005138768

    • ISSN
      1345-9678, 1347-5320
    • Language
      English
    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Atomic-scale homogenization in an fcc-based high-entropy alloy via severe plastic deformation2016

    • Author(s)
      H. Yuan, M. H. Tsai, G. Sha F. Liu, Z. Horita, *Y. T Zhu, J. T. Wang
    • Journal Title

      J. Alloys and Compounds

      Volume: 686 Pages: 15-23

    • DOI

      10.1016/j.jallcom.2016.05.337

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Hydrogen Diffusion in Ultrafine-Grained Palladium: Roles of Dislocations and Grain boundaries2016

    • Author(s)
      H. Iwaoka, M. Arita, Z. Horita
    • Journal Title

      Acta Materialia

      Volume: 107 Pages: 168-177

    • DOI

      10.1016/j.actamat.2016.01.069

    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] AZ61合金丸棒材の高圧スライド(HPS)加工による結晶粒超微細化と超塑性2016

    • Author(s)
      増田高大、藤光利茂、瀧沢陽一、堀田善治
    • Journal Title

      日本金属学会誌

      Volume: 80, 2 Pages: 128-133

    • NAID

      130005120349

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later2016

    • Author(s)
      R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, Y.T. Zhu
    • Journal Title

      JOM

      Volume: 68 Pages: 1216-1226

    • DOI

      10.1007/s11837-016-1820-6

    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Journal Article] Visible-Light-Driven Photocatalytic Hydrogen Generation on Nanosized TiO2-II Stabilized by High-Pressure Torsion2016

    • Author(s)
      Hadi Razavi-Khosroshahi, Kaveh Edalati, Masashige Hirayama, Hoda Emami, Makoto Arita, Miho Yamauchi, Hidehisa Hagiwara, Shintaro Ida,Tatsumi Ishihara, Etsuo Akiba, Zenji Horita, and Masayoshi Fuji
    • Journal Title

      ACS Catalysis

      Volume: 6 Pages: 5103-5107

    • DOI

      10.1021/acscatal.6b01482

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16H06293, KAKENHI-PROJECT-15K14183
  • [Journal Article] Extra Strengthening and Superplasticity of Ultrafine-Grained A2024 Alloy Produced by High-Pressure Sliding2016

    • Author(s)
      増田高大、瀧沢陽一、湯本学、小田切吉治、堀田善治
    • Journal Title

      J. Japan Inst. Metals

      Volume: 80 Issue: 9 Pages: 593-601

    • DOI

      10.2320/jinstmet.j2016012

      10.2320/jinstmet.J2016012

    • NAID

      130005406774

    • ISSN
      0021-4876, 1880-6880, 2433-7501
    • Language
      Japanese
    • Peer Reviewed / Open Access
    • Data Source
      KAKENHI-PROJECT-16J07050, KAKENHI-PROJECT-26220909
  • [Journal Article] Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging2016

    • Author(s)
      Yoji Mine, Kaoru Koga, Kazuki Takashima, Zenji Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 661 Pages: 87-95

    • DOI

      10.1016/j.msea.2016.03.018

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-25420758, KAKENHI-PROJECT-26220909
  • [Journal Article] Fundamentals of Superior Properties in Bulk NanoSPD Materials2016

    • Author(s)
      R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer and Y.T. Zhu
    • Journal Title

      Material Research Letters

      Volume: 4 Pages: 1-21

    • DOI

      10.1080/21663831.2015.1060543

    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183, KAKENHI-PROJECT-26220909
  • [Journal Article] A Review on High-Pressure Torsion (HPT) from 1935 to 19882016

    • Author(s)
      K. Edalati, Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 652 Pages: 325-352

    • DOI

      10.1016/j.msea.2015.11.074

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Hydrogen generation from pure water using Al-Sn powders consolidated through high-pressure torsion2016

    • Author(s)
      F. Zhang, R. Yonemoto, M. Arita, Z. Horita
    • Journal Title

      Journal of Materials Reseach

      Volume: 31 Pages: 775-782

    • DOI

      10.1557/jmr.2016.74

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Journal Article] Scaling up of High-Pressure Sliding (HPS) for Grain Refinement and Superplasticity2016

    • Author(s)
      Y. Takizawa, T. Masuda, K. Fujimitsu, T. Kajita, K. Watanabe, M. Yumoto, Y. Otagiri, Z. Horita
    • Journal Title

      Metallurgical and Materials Transactions A

      Volume: 47 Pages: 4669-4681

    • DOI

      10.1007/s11661-016-3623-3

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-16J07050, KAKENHI-PROJECT-15K14183
  • [Journal Article] Allotropic phase transformation and photoluminescence of germanium nanograins processed by high-pressure torsion2016

    • Author(s)
      Y. Ikoma, T. Toyota, Y. Ejiri, K. Saito, Q. Guo, Z. Horita
    • Journal Title

      Journal of Materials Science

      Volume: 51 Pages: 138-143

    • DOI

      10.1007/s10853-015-9328-y

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Plastic Strain and Grain Size Effect on Phase Transformations in TiO2 Ceramics Processed by high-pressure Torsion2016

    • Author(s)
      H. Razavi-Khosroshahi, K. Edalati, M. Arita, Z. Horita, M. Fuji
    • Journal Title

      Scripta Materialia

      Volume: 124 Pages: 59-62

    • DOI

      10.1016/j.scriptamat.2016.06.022

    • Peer Reviewed / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Journal Article] mpact of severe plastic deformation on microstructure and hydrogen storage of titanium-iron-manganese intermetallics2016

    • Author(s)
      K. Edalati, M. Matsuo, H. Emami, S. Itano, A. Alhamidi, A. Staykov, D.J. Smith, S. Orimo, E. Akiba, Z. Horita
    • Journal Title

      Scripta Materialia

      Volume: 124 Pages: 108-111

    • DOI

      10.1016/j.scriptamat.2016.07.007

    • Peer Reviewed / Acknowledgement Compliant / Open Access / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-25220911, KAKENHI-PROJECT-16H04539, KAKENHI-PROJECT-15K14183
  • [Journal Article] Formation of Metastable Phases in Magnesium-Titanium System by High-Pressure Torsion and Their Hydrogen Storage Performance2015

    • Author(s)
      K. Edalati, H. Emami, A. Staykov, D. J. Smith, E. Akiba, Z. Horita
    • Journal Title

      Acta Materialia

      Volume: 99 Pages: 150-156

    • DOI

      10.1016/j.actamat.2015.07.060

    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Journal Article] High-pressure torsion of metastable austenitic stainless steel at moderate temperatures2015

    • Author(s)
      Y. Mine, D. Haraguchi, Z. Horita, K. Takashima
    • Journal Title

      Philosophical Magazine Letters

      Volume: 95 Pages: 269-276

    • DOI

      10.1080/09500839.2015.1051602

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-25420758
  • [Journal Article] Strengthening of AA7075 alloy by processing with high-pressure sliding (HPS) and subsequent aging2015

    • Author(s)
      S. Lee, K. Tazoe, I. F. Mohamed, Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 628 Pages: 56-61

    • DOI

      10.1016/j.msea.2015.01.026

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004, KAKENHI-PROJECT-25630330, KAKENHI-PROJECT-26220909
  • [Journal Article] Plastic Deformation of BaTiO3 Ceramics by High-Pressure Torsion and Changes in Phase Transformations, Changes in Optical and Dielectric Properties2015

    • Author(s)
      K. Edalati, M. Arimura, Y. Ikoma, T. Daio, M. Miyata, D.J. Smith, Z. Horita
    • Journal Title

      Material Research Letters

      Volume: 3 Pages: 216-221

    • DOI

      10.1080/21663831.2015.1065454

    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Nanocrystalline steel obtained by Mechanical alloying of iron and graphite subsequently compacted by high-pressure torsion2015

    • Author(s)
      C. Borchers, C. Garve, M. Tiegel, M. Deutges, A. Herz, K. Edalati, R. Pippan, Z. Horita, R. Kirchheim
    • Journal Title

      Acta Materialia

      Volume: 97 Pages: 207-215

    • DOI

      10.1016/j.actamat.2015.06.049

    • Peer Reviewed / Acknowledgement Compliant / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Journal Article] Significance of Grain Boundaries and Stacking Faults on Hydrogen Storage Properties of Mg2Ni Intermetallics Processed by High-Pressure Torsion2015

    • Author(s)
      K. Edalati, J. Matsuda, M. Arita, T. Daio, E. Akiba, Z. Horita
    • Journal Title

      Acta Materialia

      Volume: 92 Pages: 46-54

    • DOI

      10.1016/j.actamat.2015.03.036

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PROJECT-25889043, KAKENHI-PROJECT-26220909, KAKENHI-PROJECT-15K14183
  • [Journal Article] Effect of temperature on solid-state formation of bulk nanograined intermetallic Al3Ni during high-pressure torsion2014

    • Author(s)
      A. Alhamidi, K. Edalati, H. Iwaoka and Z. Horita
    • Journal Title

      Philosophical Magazine

      Volume: 94 Pages: 876-887

    • DOI

      10.1080/14786435.2013.868945

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004, KAKENHI-PROJECT-25630330
  • [Journal Article] Thermal conductivity reduction of crystalline silicon by high-pressure torsion2014

    • Author(s)
      Sivasankaran Harish, Mitsuru Tabara, Yoshifumi Ikoma, Zenji Horita, Yasuyuki Takata, David G. Cahill, Masamichi Kohno
    • Journal Title

      Nanoscale Research Letters

      Volume: 9 Pages: 326-326

    • DOI

      10.1186/1556-276x-9-326

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PUBLICLY-25102708, KAKENHI-PROJECT-25630330
  • [Journal Article] Application of high-pressure torsion to Al-6%Cu-0.4%Zr alloy for ultrafine-grain refinement and superplasticity2014

    • Author(s)
      A. Alhamidi and Z. Horita
    • Journal Title

      Journal of Materials Science

      Volume: 49 Pages: 6689-6695

    • DOI

      10.1007/s10853-014-8362-5

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Softening by severe plastic deformation and hardening by annealing of aluminum–zinc alloy: Significance of elemental and spinodal decompositions2014

    • Author(s)
      A. Alhamidi, K. Edalati, Z. Horita, S. Hirosawa, K. Matsuda and D. Terada
    • Journal Title

      Materials Science and EngineeringA

      Volume: 610 Pages: 17-27

    • DOI

      10.1016/j.msea.2014.05.026

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Wear resistance and tribological features of pure aluminum and Al-Al2O3 composites consolidated by high-pressure torsion2014

    • Author(s)
      K. Edalati, M.Ashida, Z. Horita T. Matsui and H. Kato
    • Journal Title

      Wear

      Volume: 310 Pages: 83-89

    • DOI

      10.1016/j.wear.2013.12.022

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004, KAKENHI-PROJECT-25420102
  • [Journal Article] Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after high-pressure torsion2014

    • Author(s)
      K. Edalati, D. Akama, A. Nishio, S. Lee, Y. Yonenaga, J. M. Cubero-Sesin and Z. Horita
    • Journal Title

      Acta Materialia

      Volume: 69 Pages: 68-77

    • DOI

      10.1016/j.actamat.2014.01.036

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] High strength and superconductivity in nanostructured niobium-titanium alloy by high-pressure torsion and annealing: Significance of elemental decomposition and supersaturation2014

    • Author(s)
      K. Edalati, T. Daio, S. Lee, Z. Horita, T. Nishizaki, T. Akune, T. Nojima and T. Sasaki
    • Journal Title

      Acta Materialia

      Volume: 80 Pages: 149-158

    • DOI

      10.1016/j.actamat.2014.07.065

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Influence of severe plastic deformation at cryogenic temperature on grain refinement and softening of puremetals:Investigation using high-pressure torsion2014

    • Author(s)
      K. Edalati, J.M.Cubero-Sesin, A. Alhamidi, I. F. Mohamed, Z. Horita
    • Journal Title

      Materials Science and EngineeringA

      Volume: 613 Pages: 103-110

    • DOI

      10.1016/j.msea.2014.06.084

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] High-pressure torsion for fabrication of high-strength and high-electrical conductivity Al micro-wires2014

    • Author(s)
      J. M. Cubero-Sesin, H. In, M. Arita, H. Iwaoka and Z. Horita
    • Journal Title

      Journal of Materials Science

      Volume: 49 Pages: 6550-6557

    • DOI

      10.1007/s10853-014-8240-1

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004, KAKENHI-PROJECT-25630330
  • [Journal Article] High-Pressure Torsion of Palladium: Hydrogen-Induced Softening and Plasticity in Ultrafine Grains and Hydrogen-Induced Hardening and Embrittlement in Coarse Grains2014

    • Author(s)
      T. Hongo, K. Edalati, H. Iwaoka, M. Arita, J. Matsuda, E. Akiba and Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 618 Pages: 1-8

    • DOI

      10.1016/j.msea.2014.08.074

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Grain refinement and high strain rate superplasticity in aluminum 2024 alloy processed by high-pressure torsion2014

    • Author(s)
      A. Alhamidi and Z. Horita
    • Journal Title

      Materials Science and Engineering A

      Volume: 622 Pages: 139-145

    • DOI

      10.1016/j.msea.2014.11.009

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] High-pressure torsion of titanium: Grain size effect on allotropic phase transformations at room and cryogenic temperatures2014

    • Author(s)
      K. Edalati, T. Daio, M. Arita, S. Lee, Z. Horita, A. Togo and I. Tanaka
    • Journal Title

      Acta Materialia

      Volume: 68 Pages: 207-213

    • DOI

      10.1016/j.actamat.2014.01.037

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Nanograin formation of GaAs by high-pressure torsion2014

    • Author(s)
      Y. Ikoma, Y. Ejiri, K. Hayano, K. Saito, Q. Guo and Z. Horita
    • Journal Title

      Philos. Mag. Lett.

      Volume: 94 Pages: 1-8

    • DOI

      10.1080/09500839.2013.852265

    • Peer Reviewed / Acknowledgement Compliant
    • Data Source
      KAKENHI-ORGANIZER-22102001, KAKENHI-PUBLICLY-25102708
  • [Journal Article] Strengthening of Cu-Ni-Si Alloy Using High-Pressure Torsion and Aging2014

    • Author(s)
      S. Lee, H. Matsunaga, X. Sauvage and Z. Horita
    • Journal Title

      Materials Characterization

      Volume: 90 Pages: 62-70

    • DOI

      10.1016/j.matchar.2014.01.006

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Activation of TiFe for hydrogen storage by plastic deformation using groove rolling and high-pressure torsion: Similarities and differences2014

    • Author(s)
      K. Edalati, J. Matsuda, A. Yanagida, E. Akiba and Z. Horita
    • Journal Title

      International Journal of Hydrogen Energy

      Volume: 39 Pages: 15589-15594

    • DOI

      10.1016/j.ijhydene.2014.07.124

    • Peer Reviewed / Acknowledgement Compliant / Open Access
    • Data Source
      KAKENHI-PLANNED-22102004, KAKENHI-PROJECT-25889043
  • [Journal Article] High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum-copper system2013

    • Author(s)
      K. Oh-ishi, K. Edalati, H. S. Kim, K. Hono and Z. Horita
    • Journal Title

      Acta Mater.

      Volume: 61 Pages: 3482-3489

    • DOI

      10.1016/j.actamat.2013.02.042

    • NAID

      120005227405

    • Peer Reviewed
    • Data Source
      KAKENHI-ORGANIZER-22102001, KAKENHI-PLANNED-22102002
  • [Journal Article] Strengthening of Al through addition of Fe and by processing with High-Pressure Torsion2013

    • Author(s)
      J. M. Cubero-Sesin and Z. Horita
    • Journal Title

      Journal of Materals Science

      Volume: 48 Pages: 4713-4722

    • DOI

      10.1007/s10853-012-6935-8

    • Peer Reviewed
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Microstructural Characteristics of Tungsten-Base Nanocomposites Produced from Micropowders by High-Pressure Torsion2012

    • Author(s)
      K.Edalati, S.Toh, H.Iwaoka and Z.Horita
    • Journal Title

      Acta Materialia

      Volume: 60 Pages: 3885-3893

    • DOI

      10.1016/j.actamat.2012.02.048

    • NAID

      120005227404

    • Peer Reviewed
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] Aging Behavior of Cu-Ni-Si Alloy Processed by High-Pressure Torsion2011

    • Author(s)
      H.Matsunaga, Z.Horita, K.Imamura, T.Kiss, X.Sauvage
    • Journal Title

      Materials Science Forum

      Volume: 667-669

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21656176
  • [Journal Article] Correlations between Hardness and Atomic Bond Parameters of Pure Metals and Semi-metals after Processing by High-Pressure Torsion2011

    • Author(s)
      K.Edalati, Z.Horita
    • Journal Title

      Scripta Materialia

      Volume: 64 Pages: 161-164

    • Peer Reviewed
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] High-Pressure Torsion for Ring Samples in Different Thicknesses2011

    • Author(s)
      H.Iwaoka, Y.Harai, Z.Horita
    • Journal Title

      Materials Science Forum

      Volume: 667-669 Pages: 51-56

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-21656176
  • [Journal Article] High-pressure torsion of pure metals : Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness2011

    • Author(s)
      K.Edalati, Z.Horita
    • Journal Title

      Acta Materialia

      Volume: 59 Pages: 6831-6836

    • DOI

      10.1016/j.actamat.2011.07.046

    • Peer Reviewed
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Journal Article] 解説巨大ひずみ加工による超微細組織制御2010

    • Author(s)
      堀田善治
    • Journal Title

      軽金属 第60巻第3号

      Pages: 134-141

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] High-pressure torsion of hafnium2010

    • Author(s)
      K Edalati, Z. Horita, Y. Mine
    • Journal Title

      Materials Science Engineering A527

      Pages: 2136-2141

    • NAID

      120005227285

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Microstructural evolution in pure aluminum in the early stages of processing by high-pressure torsion2010

    • Author(s)
      C. Xu, Z. Horita, T.G.Langdon
    • Journal Title

      Materials Transactions. 51

      Pages: 2-7

    • NAID

      10026264247

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Universal Plot for Hardness Variation in Pure Metals Processed by High-Pressure Torsion2010

    • Author(s)
      K. Edalati, Z. Horita
    • Journal Title

      Mater.Trans. 51

      Pages: 1051-1054

    • NAID

      10026267976

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] High-Pressure Torsion of Machining Chips and Bulk Discs of Amorphous Zr50Cu30Al10Ni102010

    • Author(s)
      K. Edalati, Y. Yokoyama, Z. Horita
    • Journal Title

      Materials Transactions. 51

      Pages: 23-26

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] 巨大ひずみ加工による超微細組織制御2010

    • Author(s)
      堀田善治
    • Journal Title

      軽金属 60

      Pages: 134-141

    • NAID

      10026210508

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Softening and Microstructural Coarsening without Twin Formation in FCC Metals with Low Stacking Fault Energy after Processing by High-Pressure Torsion2009

    • Author(s)
      H. Matsunaga and Z. Horita
    • Journal Title

      Materials Transactions 50(in press)

    • NAID

      10025153652

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Micorstructural Evolution in Pure Aluminum Processed by High-Pressure Torsion2009

    • Author(s)
      Y. Ito, Z. Horita.
    • Journal Title

      Materials Science and Engineering A 503

      Pages: 32-36

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Micorstructural Evolution in Pure Aluminum Processed by High-Pressure Torsion2009

    • Author(s)
      Y. Ito and Z. Horita
    • Journal Title

      Materials Science and Engineering A 503

      Pages: 32-36

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] 九州大学巨大ひずみ加工プロセスの紹介(Giant straining process in Kyushu University)2009

    • Author(s)
      堀田善治
    • Journal Title

      軽金属 59

      Pages: 385-388

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Development of High-Pressure Sliding for Microstructural Refinement of Rectangular Metallic Sheets2009

    • Author(s)
      T. Fujioka and Z. Horita
    • Journal Title

      Materials Transactions 50

      Pages: 930-933

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Softening and Microstructural Coarsening without Twin Formation in FCC Metals with Low Stacking Fault Energy after Processing by High-Pressure Torsion2009

    • Author(s)
      H. Matsunaga, Z. Horita
    • Journal Title

      Materials Transactions 50

      Pages: 1633-1637

    • NAID

      10025153652

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Fabrication and characterization of supersaturated Al-Mg alloys by severe plastic deformation and their mechanical properties2009

    • Author(s)
      K. Kaneko, T. Hata, T. Tokunaga, Z. Horita
    • Journal Title

      Material Transactions 50

      Pages: 76-81

    • NAID

      10024810781

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-19360317
  • [Journal Article] Variation of Mechanical Properties and Microstructures with Equivalent Strain in Pure Fe Processed by High Pressure Torsion2009

    • Author(s)
      K. Edalati, T. Fujioka and Z. Horita
    • Journal Title

      Materials Transactions 50

      Pages: 44-50

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Development of High-Pressure Sliding for Microstructural Refinement of Rectangular Metallic Sheets2009

    • Author(s)
      T. Fujioka, Z. Horita
    • Journal Title

      Materials Transactions 50

      Pages: 930-933

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Giant Straining Process for Advanced Materials Conlaining Ultra-High Density Lattice Defects2009

    • Author(s)
      Zenji Horita
    • Journal Title

      News Letter 8

      Pages: 1-4

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2009

    • Author(s)
      Zenji Horita
    • Journal Title

      News Letter 7

      Pages: 1-4

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Variation of Mechanical Properties and Microstructures with Equivalent Strain in Pure Fe Processed by High Pressure Torsion2009

    • Author(s)
      K. Edalati, T. Fujioka, Z. Horita
    • Journal Title

      Materials Transactions 50

      Pages: 44-50

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] High Pressure Torsion Using Ring Specimens2008

    • Author(s)
      Y. Harai, Y.Ito and Z. Horita
    • Journal Title

      Scripta Materialia 58

      Pages: 469-482

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Microstructure and Mechanical Properties of Pure Cu Processed by High Pressure Torsion2008

    • Author(s)
      K. Edalati, T. Fujioka, Z. Horita
    • Journal Title

      Materials Science and Engineering A 497

      Pages: 168-173

    • NAID

      120005227393

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Effect of initial grain sizes on hardness variation and strain distributi on of pure aluminum severely deformed by compression tests2008

    • Author(s)
      T. Inoue, Z. Horita, et.al.
    • Journal Title

      Acta Materialia 56

      Pages: 6291-6303

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2008

    • Author(s)
      Zenji Horita
    • Journal Title

      News Letter 6

      Pages: 1-6

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Microstructure and Mechanical Properties of Pure Cu Processed by High Pressure Torsion2008

    • Author(s)
      K. Edalati, T. Fujioka, Z. Horita
    • Journal Title

      Materials Science and Engineering A 497

      Pages: 168-173

    • NAID

      120005227393

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] High Pressure Torsion Using Ring Specimens2008

    • Author(s)
      Y. Harai, Y. Ito, Z. Horita
    • Journal Title

      Scripta Materialia 58

      Pages: 469-482

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2008

    • Author(s)
      Zenji, Horita
    • Journal Title

      News Letter 4

      Pages: 1-4

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Microstructure and Mechanical Properties of Pure Cu Processed by High Pressure Torsion2008

    • Author(s)
      K. Edalati, T. Fujioka and Z. Horita
    • Journal Title

      Materials Science and Engineering A 479

      Pages: 168-173

    • NAID

      120005227393

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2008

    • Author(s)
      Zenji Horita
    • Journal Title

      News Letter 5

      Pages: 1-4

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2007

    • Author(s)
      Zenji Horita
    • Journal Title

      News Letter 1

      Pages: 1-4

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2007

    • Author(s)
      Zenji, Horita
    • Journal Title

      News Letter 3

      Pages: 1-6

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] The Evolution of Homogeneity in Processing by High-Pressure Torsion2007

    • Author(s)
      C.Xu, Z.Horita and T.G.Langdon
    • Journal Title

      Acta Materialia 55

      Pages: 203-212

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article]2007

    • Author(s)
      K. Kaneko, K. Sato, Z Horita, K. Inoke
    • Journal Title

      Material Science Forum 561-565

      Pages: 2009-2012

    • Data Source
      KAKENHI-PROJECT-19360317
  • [Journal Article] Giant Straining Process for Advanced Materials Containing Ultra-High Density Lattice Defects2007

    • Author(s)
      Zenji, Horita
    • Journal Title

      News Letter 2

      Pages: 1-4

    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] Influence of stacking fault energy on the minimum grain size achieved in severe plastic deformation2007

    • Author(s)
      Y.H. Zhao, Y.T. Zhu, X.Z. Liao, Z. Horita
    • Journal Title

      T.G.Langdon, Materials Science and Engineering A463

      Pages: 22-26

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] High Pressure Torsion Using Ring Specimens2007

    • Author(s)
      Y., Harai・Y., Ito・Z., Horita
    • Journal Title

      Scripta Materialia 58

      Pages: 469-482

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] Grain Refinement of High-Purity FCC Metals Using Equal-Channel Angular Pressing2007

    • Author(s)
      Zenji Horita et al.
    • Journal Title

      Materials Science Forum

      Pages: 1273-1278

    • Data Source
      KAKENHI-PROJECT-18062005
  • [Journal Article] The Evolution of Homogeneity in Processing by High-Pressure Torsion2007

    • Author(s)
      C. Xu, Z. Horita, T.G.Langdon
    • Journal Title

      Acta Materialia 55

      Pages: 203-212

    • Peer Reviewed
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Journal Article] An Investigation of Deformation in Copper Single Crystals using Equal-Channel Angular Pressing,2006

    • Author(s)
      M.Furukawa, Y.Fukuda, K.Oh-ishi, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science Forum 503-504

      Pages: 113-118

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Application of High Pressure Torsion to Bulk Samples,2006

    • Author(s)
      G.Sakai, K.Nakamura, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science Forum 503-504

      Pages: 391-396

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Producing Bulk Ultrafine-Grained materials by Severe Plastic Deformation,2006

    • Author(s)
      R.Z.Valiev, Y.Estrin, Z.Horita, T.G.Langdon, M.J.Zehetbauer, Y.Zhu
    • Journal Title

      JOM 58

      Pages: 33-39

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Using Torsion to produce severe strain and untlrafine Grains2006

    • Author(s)
      Z.Horita
    • Journal Title

      Ultrafine Grained Materials IV

      Pages: 17-22

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Using Torsion to produce severe strain and ultrafine Grains, The Minerals,2006

    • Author(s)
      Z.Horita, T.G.Langdon
    • Journal Title

      Ultrafine Grained Materials IV

      Pages: 17-22

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Production of ultrafine-Grained Structures Using Equal-Channel Angular Pressing (Japanese)2005

    • Author(s)
      Z.Horita
    • Journal Title

      Yosetu Gakkaishi 74

      Pages: 88-91

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Microstructural control of metallic materials by severe plastic deformation (Japanese)2005

    • Author(s)
      Z.Horita
    • Journal Title

      Gakujutu Geppou 58

      Pages: 594-598

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Microstructures and microhardness of an aouminum alloy and pure copper after precessing by high-pressure torsion2005

    • Author(s)
      Z.Horita
    • Journal Title

      Materials Science and Engineering A410-411

      Pages: 422-425

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Grain refinement and superplasticity in aluminum alloy processed by high-pressure torsion,2005

    • Author(s)
      G.Sakai, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A393

      Pages: 344-351

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Achieving High Strength and High Ductility in Precipitation-Hardened Alloys,2005

    • Author(s)
      Z.Horita, K.Ohashi, T.Fujita, K.Kaneko, T.G.Langdon
    • Journal Title

      Adv.Mater. 17

      Pages: 1599-1602

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] A quantitative study of cavity development in the tensile testing of aluminum metal matrix composite processed by equal-channel angular pressing,2005

    • Author(s)
      M.Kawasaki, Y.Huang, C.Xu, M.Furukawa, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A410-411

      Pages: 402-407

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] ECAP加工による微細粒組織の形成2005

    • Author(s)
      堀田善治
    • Journal Title

      溶接学会誌 74

      Pages: 88-91

    • NAID

      110003402259

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion,2005

    • Author(s)
      Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A410-411

      Pages: 422-425

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] An Investigation of the deformation process during equal-channel angular pressing of an aluminum single crystal,2005

    • Author(s)
      M.Furukawa, Y.Kawasaki, Y.Miyahara, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A410-411

      Pages: 194-200

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Achieving High Strength and High Ductility in Precipitation-Hardened Alloys2005

    • Author(s)
      Z.Horita et al.
    • Journal Title

      Advanced Materials 17

      Pages: 1599-1602

    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Achieving High Strength and High Ductility in Precipitation-Hardened Alloys2005

    • Author(s)
      Z.Horita
    • Journal Title

      Adv. Mater 17

      Pages: 1599-1602

    • Description
      「研究成果報告書概要(和文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion,2005

    • Author(s)
      S.V.Dobtkin, E.N.Bastarache, G.Sakai, T.Fujita, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A408

      Pages: 141-146

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] The evolution of homogeneity and grain refinement during equal-channel angular pressing : A model for grain refinement in ECAP,2005

    • Author(s)
      C.Xu, M.Furukawa, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A398

      Pages: 66-76

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Developing high-pressure torsion for use with bulk samples,2005

    • Author(s)
      G.Sakai, K.Nakamura, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science and Engineering A406

      Pages: 268-273

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy,2005

    • Author(s)
      C.Xu, M.Furukawa, Z.Horita, T.G.Langdon
    • Journal Title

      A cta Materialia 53

      Pages: 749-758

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Journal Article] Microstructures after Processing by Aging and ECAP for Al-Mg2Si Alloys Containing Excess Si or Mg,2004

    • Author(s)
      K.Fujita, T.Fujita, K.Oh-ishi, K.Kenji, Z.Horita, T.G.Langdon
    • Journal Title

      Materials Science Forum 475-479

      Pages: 4047-4050

    • Description
      「研究成果報告書概要(欧文)」より
    • Data Source
      KAKENHI-PROJECT-15360370
  • [Patent] 超伝導合金材料又は超伝導酸化物材料の生産方法、及び、超伝導合金材料又は超伝導酸化物材料2021

    • Inventor(s)
      美藤正樹、堀田善治、松本 要
    • Industrial Property Rights Holder
      美藤正樹、堀田善治、松本 要
    • Industrial Property Rights Type
      特許
    • Filing Date
      2021
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Patent] 相当ひずみの導入方法2017

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      長野鍛工株式会社、国立大学法人九州大学
    • Industrial Property Rights Type
      特許
    • Filing Date
      2017
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Patent] 水素分離膜の製造方法及び水素分離膜2016

    • Inventor(s)
      松本佳久、岩岡秀明、有田誠、堀田善治
    • Industrial Property Rights Holder
      松本佳久、岩岡秀明、有田誠、堀田善治
    • Industrial Property Rights Type
      特許
    • Filing Date
      2016-03-30
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Patent] 相当ひずみ付与装置2016

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Type
      特許
    • Filing Date
      2016-02-15
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Patent] 相当ひずみ付与装置2016

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Type
      特許
    • Filing Date
      2016-02-15
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Patent] 相当ひずみ付与材料の作製方法2016

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Type
      特許
    • Filing Date
      2016-02-15
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Patent] 水素分離膜の製造方法及び水素分離膜2016

    • Inventor(s)
      松本佳久,岩岡秀明,有田誠,堀田善治
    • Industrial Property Rights Holder
      国立高等専門学校機構,九州大学
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2016-069404
    • Filing Date
      2016-03-30
    • Data Source
      KAKENHI-PROJECT-15H04148
  • [Patent] 水素分離膜の製造方法及び水素分離膜2016

    • Inventor(s)
      松本佳久、岩岡秀明、有田誠、堀田善治
    • Industrial Property Rights Holder
      松本佳久、岩岡秀明、有田誠、堀田善治
    • Industrial Property Rights Type
      特許
    • Filing Date
      2016-03-30
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Patent] 相当ひずみ付与材料の作製方法2016

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Type
      特許
    • Filing Date
      2016-02-15
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Patent] ナローインプラントのためのチタン合金の高強度化2014

    • Inventor(s)
      蘆田茉希、塙 隆夫、堀田善治
    • Industrial Property Rights Holder
      蘆田茉希、塙 隆夫、堀田善治
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2014-191029
    • Filing Date
      2014-09-19
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Patent] 相当ひずみ付与装置及びその制御方法2014

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2014-193130
    • Filing Date
      2014-09-22
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Patent] 相当ひずみ付与方法及び相当ひずみ付与装置2014

    • Inventor(s)
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Holder
      小田切吉治、瀧沢陽一、湯本学、堀田善治
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2014-193129
    • Filing Date
      2014-09-22
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Patent] 相当ひずみ付与方法及び相当ひずみ付与装置2013

    • Inventor(s)
      小田切吉治、瀧沢陽一、堀田善治、藤光利茂
    • Industrial Property Rights Holder
      長野鍛工株式会社、堀田善治、藤光利茂
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2013-232866
    • Filing Date
      2013-11-11
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Patent] L10型FeNi規則合金の製造方法、及びL10型FeNi規則合金2012

    • Inventor(s)
      堀田善治、李昇原、高梨弘毅、他4名
    • Industrial Property Rights Holder
      九州大学、東北大学、小嗣真人、大河内拓雄、大槻匠
    • Industrial Property Rights Type
      特許
    • Industrial Property Number
      2012-261373
    • Filing Date
      2012-11-29
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Patent] 熱電材料の製造方法および熱電材料2010

    • Inventor(s)
      林高廣、堀田善治
    • Industrial Property Rights Holder
      九州大学
    • Filing Date
      2010-11-16
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Patent] ひずみ印加方法及びひずみ印加装置2007

    • Inventor(s)
      堀田善治
    • Industrial Property Rights Holder
      堀田善治
    • Filing Date
      2007-08-13
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Patent] ひずみ印加方法及びひずみ印加装置2007

    • Inventor(s)
      堀田善治
    • Industrial Property Rights Holder
      堀田善治
    • Filing Date
      2007-08-13
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Patent] ひずみ印加方法及びひずみ印加装置2007

    • Inventor(s)
      堀田善治
    • Industrial Property Rights Holder
      堀田善治
    • Filing Date
      2007-08-13
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Presentation] 高圧ねじり(HPT)加工と時効処理の並立による高強度Al-Cu-Mg合金の開発2021

    • Author(s)
      馬 鵬程、増田 高大、廣澤 渉一、堀田 善治
    • Organizer
      軽金属学会(第141回)秋期大会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Powder Consolidation and Synthesis for Enhanced Mechanical Properties Using Severe Plastic Deformation under High Pressure2021

    • Author(s)
      Yongpeng Tang, Takahiro Masuda, Zenji Horita
    • Organizer
      7th Forum of Center for Advanced Materials Research and International Collaboration (CAMRIC-FORUM6) 20th Light Metals International Workshop
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Consolidation of Al-Ti-Mg powders and formation of intermetallic phases by high-pressure torsion2021

    • Author(s)
      Yongpeng Tang, Kaveh Edalati, Zenji Horita, Masaki Mito, Mitsuhiro Murayama
    • Organizer
      140th JILM Annual Meeting
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Simultaneous enhancement of strength and ductility in nonflammable Mg alloys through grain refinement and fine-dispersion of nanoparticles using SPD under high pressure2021

    • Author(s)
      Yongpeng Tang, Shinichi Inoue, Masaki Mito, Zenji Horita, Yoshihito Kawamura
    • Organizer
      Conference in memory of Prof. Zhilyaev, Magnitogorsk Materials Week
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] 機械学習と高圧ねじり加工によるAl-Mg-Ti 三元系合金の超伝導探索2021

    • Author(s)
      杢谷 成道、美藤 正樹、松本 要、唐永 鵬、増田 高大、堀田 善治
    • Organizer
      軽金属学会(第141回)秋期大会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Strain distribution and microstructure observation of LPSO Mg-Zn-Y alloys after processing by high-pressure sliding (HPS)2021

    • Author(s)
      Yongpeng Tang, Shinichi Inoue, Yoshihito Kawamura, and Zenji Horita
    • Organizer
      141st JILM Annual Meeting
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Simultaneous enhancement of strength and ductility in nonflammable Mg alloys through grain refinement and fine-dispersion of nanoparticles using severe plastic deformation under high pressure2021

    • Author(s)
      Yongpeng Tang, Shinichi Inoue, Masaki Mito, Zenji Horita, Yoshihito Kawamura
    • Organizer
      JIM Spring Meeting
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] 往復高圧すべり加工による生体用Ti-6Al-7Nb合金棒材の高強度化2021

    • Author(s)
      蘆田 茉希、大塚 英一、陳 鵬、瀧沢 陽一、湯本 学、小田切 吉治、堀田 善治、 塙 隆夫
    • Organizer
      日本金属学会春期(第168回)講演大会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Al-Cu合金の高圧下における固溶過程のその場観察と固溶限拡大を活用した高強度化2021

    • Author(s)
      増田 高大、廣澤 渉一、堀田 善治、新名 亨、入舩 徹男、肥後 祐司、 丹下 慶範、大石 泰生
    • Organizer
      軽金属学会(第141回)秋期大会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] High-Pressure Torsion of CH3NH3SnI3 Perovskite: Enhanced Thermoelectrical Properties2021

    • Author(s)
      Qing Wang, Yongpeng Tang, Zenji Horita, Satoshi Iikubo
    • Organizer
      JIM Spring Meeting
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Impact of high-pressure thermal process on solid solubility and precipitation in age-hardenable aluminium alloys2020

    • Author(s)
      Takahiro Masuda, Shoichi Hirosawa, Zenji Horita, Toru, Shinmei, Tetsuo Irifune, Yuji Higo, Yoshinori Tange, Yasuo Ohishi
    • Organizer
      17th International Conference on Aluminium Alloys
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] HPS加工によるTi-6Al-7Nb合金4mm板材の高強度化2020

    • Author(s)
      蘆田 茉希、鈴木 貴大、陳 鵬、瀧沢 陽一、湯本 学、小田切 吉治、寺田 大将、堀田 善治、 塙 隆夫
    • Organizer
      日本金属学会2020年秋期(第167回)講演大会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Three strategies to achieve concurrent strengthening by ultrafine-grained and precipitation hardenings for severely deformed age-hardenable aluminum alloys2020

    • Author(s)
      Shoichi Hirosawa, Yongpeng Tang, Zenji Horita, Seungwon Lee, Kenji Matsuda, Daisuke Terada
    • Organizer
      17th International Conference on Aluminium Alloys
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Production of High-Performance Structural and Functional Materials Using Severe Plastic Deformation2020

    • Author(s)
      Zenji Horita
    • Organizer
      UKM Webnar Online Zoom Meeting
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Al-Cu合金における固溶量と析出現象に及ぼす高圧力の効果2020

    • Author(s)
      増田 高大,廣澤 渉一, 堀田 善治, 新名 亨, 入舩 徹男, 肥後 祐司, 丹下 慶範, 大石 泰生
    • Organizer
      軽金属学会関東支部第7回(2020)若手研究者ポスター発表会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Developing High-Strength and High-Electrical Conductivity Aluminum Alloys Containing Iron2020

    • Author(s)
      Takahiro Masuda, Shoichi Hirosawa, Zenji Horita
    • Organizer
      6th Forum of Center for Advanced Materials Research and International Collaboration (CAMRIC-FORUM6) 20th Light Metals International Workshop
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] 高圧スライド加工を利用したその場シンクロトロンX線解析:相変態挙動解析への応用2020

    • Author(s)
      堀田 善治
    • Organizer
      佐賀大学シンクロトロン光応用研究センター講演会
    • Invited
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Baの高圧ねじり加工材における超伝導相の準安定化2020

    • Author(s)
      辻 皓貴, 唐 永鵬, 美藤 正樹, 堀田 善治, 田尻 恭之
    • Organizer
      第126回日本物理学会九州支部例会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Severe plastic deformation on age hardenable aluminum alloy: mechanical and precipitation behavior2020

    • Author(s)
      Amandine Duchaussoy, Xavier Sauvage, Alexis Deschamps, Frederic De Geuser, Gilles Renou, Yoichi Takizawa, Zenji Horita
    • Organizer
      17th International Conference on Aluminium Alloys
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] HPS往復加工を施したTi-6Al-7Nb合金4 mm板材の組織と機械的性質2020

    • Author(s)
      露崎 達也、蘆田 茉希、陳 鵬、瀧沢 陽一、湯本 学、小田切 吉治、堀田 善治、塙 隆夫
    • Organizer
      日本金属学会2020年秋期(第167回)講演大会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] 巨大ひずみ加工による軽金属材料の高強度・高延性化2020

    • Author(s)
      堀田 善治
    • Organizer
      2020年度第一回「くまもと軽金属オープンイノベーション研究会」第76回「高性能Mg合金創製加工研究会」
    • Invited
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] モット絶縁体イリジウム酸化物Sr2IrO4の輸送特性における巨大ひずみ加工効果2020

    • Author(s)
      小川 颯也, 堀田 善治, Edalati Kaveh, 松平 和之
    • Organizer
      第126回日本物理学会九州支部例会
    • Data Source
      KAKENHI-PROJECT-19H00830
  • [Presentation] Multi-Pass High-Pressure Sliding (MP-HPS) for Superplasticity in Metallic Round Rods2018

    • Author(s)
      Y. Tang, K. Sumikawa, Y. Takizawa, M. Yumoto, Y. Otagiri, Z. Horita
    • Organizer
      Materials Science and Engineering Congress (MSE2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Upsizing Sample Dimensions Using Combination of Incremental Feeding with Severe Plastic Deformation under High Pressure2018

    • Author(s)
      Zenji Horita
    • Organizer
      Nanostructured Materials(NANO2018)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Modifying reactivity for hydrogen storage performance by surface mechanical attrition treatment : application to Ti-V-Cr alloys2018

    • Author(s)
      T. Grosdidier, K. Edalati, M. Novelli, S. Itano, H.W. Li, E. Akiba, Z. Horita
    • Organizer
      XIV International Conference on Nanostructured Materials(NANO2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe plastic deformation for production of high-performance hydrogen storage materials2018

    • Author(s)
      Zenji Horita
    • Organizer
      Sustainable Industrial Processing Summit & Exhibition (2018 SIPS)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Grain Refinement and Production of Superplasticity in Metallic Round Rods Using Multi-Pass High-Pressure Sliding (MP-HPS)2018

    • Author(s)
      Y. Tang, K. Sumikawa, Y. Takizawa, M. Yumoto, Y. Otagiri, Z. Horita
    • Organizer
      XIV International Conference on Nanostructured Materials(NANO2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Rapid Diffusion Induced by Severe Plastic Deformation2018

    • Author(s)
      Zenji Horita
    • Organizer
      4th Forum of Center for Advanced Materials Research and International Collaboration (CAMRIC-FORUM4)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Producing and characterizing of ultrafine-grained Ti and Zr with allotropic phase Transformation2018

    • Author(s)
      Z. Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials (GSAM2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] In-situ analysis of ω phase to α phase transformation in titanium processed by high-pressure torsion2018

    • Author(s)
      M. Arita, K. Matsuo, D. Maruno, Y. Ikeda, Y. Higo, Y. Tange, Y. Ohishi, and Z. Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials (GSAM2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Influence of thermally induced grain growth on the precipitation kinetics and on the mechanical properties of an ultra-fine grain 7449 AA2018

    • Author(s)
      A. Duchaussoy, X. Sauvage, K. Edalati, Z. Horita
    • Organizer
      International conference on Aluminum Alloys(ICAA16)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Transition from low-temperature superplasticity to room-temperature superplasticity by high-pressure torsion2018

    • Author(s)
      K. Edalati, Z. Horita, and R. Z. Valiev
    • Organizer
      13th International Conference on Superplasticity in Advanced Materials (ICSAM)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Incremental Feeding in Severe Plastic Deformation under High Pressure for Upsizing Sample Dimensions2018

    • Author(s)
      Zenji Horita
    • Organizer
      The 4th Russia-Japan International Seminar on Advanced Materials (RJISAM-IV)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Activation of Ti-V-Cr alloys for hydrogen storage by surface mechanical attrition treatment and high-pressure torsion2018

    • Author(s)
      K. Edalati, M. Novelli, S. Itano, H.W. Li, E. Akiba, Z. Horita, T. Grosdidier
    • Organizer
      22nd World Hydrogen Energy Conference(WHEC2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Strengthening of Ti-6Al-7Nb alloy by high-pressure sliding2018

    • Author(s)
      M. Ashida, Y. Kitamura, P. Chen, H. Doi, Y. Tsutsumi, Y. Takizawa, M. Yumoto, Y. Otagiri, Z. Horita, and T. Hanawa
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials (GSAM2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Microstructures and mechanical properties of supersaturated Al-2%Fe alloy produced by high-pressure torsion using upsized ring samples2018

    • Author(s)
      T. Masuda, Z. Horita
    • Organizer
      International conference on Aluminum Alloys(ICAA16)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Phase transformations and aging behavior of pure Ti and Ti-6Al-7Nb processed by High-Pressure Torsion2018

    • Author(s)
      J. M. Cubero-Sesin, J. C. Gonzalez-Masis, A. Martinez, E. Ulate-Kolitsky, M. Chaves, H. Aguero, J. R. Vega-Baudrit, K. Edalati, and Z. Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials (GSAM2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Simultaneous enhancement of strength and ductility in ultrafine grained Al-13.4wt%Mg alloy by high-pressure sliding2018

    • Author(s)
      Y. Tang, S. Hirosawa, Y. Takizawa, M. Yumoto, Y. Otagiri, and Z. Horita
    • Organizer
      International conference on Aluminum Alloys(ICAA16)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Surface properties and activation behaviors of TiFe-based hydrogen absorbing alloys2018

    • Author(s)
      E. Akiba, R. Hayashi, H.W. Li, M. Arita, Z. Horita, K. Edalati
    • Organizer
      International Conference on Processing & Manufacturing of Advanced Materials (THERMEC’2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Influence of severe plastic deformation on photocatalytic performance of oxides2018

    • Author(s)
      K. Edalati, H.R. Khosroshahi, M. Fuji and Z. Horita
    • Organizer
      XIV International Conference on Nanostructured Materials(NANO2018)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Evolution of dislocation structure in the presence of hydrogen2018

    • Author(s)
      S. Wang, A. Nagao, K. Edalati, Z. Horita, P. Sofronis, and I.M. Robertson
    • Organizer
      3rd International Conference on Metals & Hydrogen
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Incremental Feeding for Upsizing Severely Deformed Areas under High Pressure2018

    • Author(s)
      Kosei Sumikawa, Yoichi Takizawa, Manabu Yumoto, Yoshiharu Otagiri, Zenji Horita
    • Organizer
      TMS2018Annual Meeting & Exhibition
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Microstructural and optical properties of nanograined Si processed by high-pressure torsion2018

    • Author(s)
      Y. Ikoma, B. Chon, T.Yamasaki, K. Saito, Q. Guo, M.R. McCartney, D.J. Smith, Z. Horita
    • Organizer
      The 5th International Conference on Nanomechanics and Nanocomposites (ICNN5)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Incremental Feedings with High-Pressure Torsion (IF-HPT) and High-Pressure Sliding (IF-HPS) for Upsizing Sample Dimensions2018

    • Author(s)
      Zenji Horita
    • Organizer
      Materials Science and Engineering Congress (MSE2018)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Incremental Feeding High-Pressure Sliding (IF-HPS) for Production of Large Scale Ultrafine-Grained Sheet2017

    • Author(s)
      Y. Takizawa, K.Sumikawa, K. Watanabe, T. Masuda, M. Yumoto, Y. Otagiri and Z. Horita
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Aging behavior and electrical conductivity of Al-(Fe, Cr, Mn) alloys processed by High-Pressure Torsion2017

    • Author(s)
      Jorge M. Cubero-Sesin, Makoto Arita, Kaveh Edalati and Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] HRTEM observations of nanograined germanium produced by high-pressure torsion2017

    • Author(s)
      Yoshifumi Ikoma, Kazuki Kumano, Bumsoo Chon, Kaveh Edalati, Martha R. McCartney, David J. Smith, and Zenji Horita
    • Organizer
      The 7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Challenging for Scaling-up of Severe Plastic Deformation Process under High Pressure2017

    • Author(s)
      Zenji Horita
    • Organizer
      The 7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Scaling-up of Severe Plastic Deformation Process under High Pressure2017

    • Author(s)
      Zenji Horita
    • Organizer
      2017 International Nanocrystalline Workshop, The Kunming University of Science and Technology
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe Plastic Deformation (SPD) of Oxides2017

    • Author(s)
      Kaveh Edalati, Hadi Razavi-Khosroshahi, Masayoshi Fuji, Zenji Horita
    • Organizer
      European Congress and Exhibition on Advanced Materials and Processes (EUROMAT)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Simultaneous strengthening due to grain refinement and spinodal decomposition in Al-13.4wt% Mg alloy2017

    • Author(s)
      Yongpeng Tang, Shoichi Hirosawa, Zenji Horita, Kenji Matsuda, Seungwon Lee and Daisuke Terada
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Effects of High-Pressure torsion and subsequent aging on mechanical properties of A2024 aluminum alloy2017

    • Author(s)
      I.F. Mohamed, T. Masuda, S. Lee, K. Edalati, Z. Horita and M.Z. Omar
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Strengthening of Ti-6Al-7Nb alloy with bimodal microstructure by high-pressure torsion2017

    • Author(s)
      M. Ashida, P. Chen, H. Doi, Y. Tsutsumi, Z. Horita, T. Hanawa
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] In-situ electrical resistance measurement of pure titanium during processing by high-pressure sliding2017

    • Author(s)
      Makoto Arita, Yukimasa Ikeda, Yoichi Takizawa, Manabu Yumoto, Yoshiharu Otagiri and Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Effect of the initial microstructure on the microstructural evolution and superplasticity of Ti-6Al-7Nb alloys nanostructured via High-Pressure Torsion2017

    • Author(s)
      J.M. Cubero-Sesin, J.E. Gonz&aacute;lez-Hern&aacute;ndez, E. Ulate-Kolitsky, K. Edalati, and Z. Horita
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Phase Transformation of Pure Titanium Processed by High-Pressure Torsion2017

    • Author(s)
      Makoto Arita, Rin Haraguchi, Yuuki Yoshimatsu, Daisuke Maruno, Kaveh Edalati and Zenji Horita
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Superplasticity of nanostructured Ti-6Al-7Nb alloy with equiaxed and lamellar initial microstructures processed by High-Pressure Torsion2017

    • Author(s)
      Jorge M. Cubero-Sesin, Joaquin E. Gonzalez-Hernandez, Elena Ulate-Kolitsky, Kaveh Edalati and Zenji Horita
    • Organizer
      The 7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Nanostructure and Electrical Properties of Bulk Nanocrystalline Si Produced by High-Pressure Torsion2017

    • Author(s)
      B. Chon, Y. Ikoma, M. Kohno, J. Shiomi, M. R. McCartney, D. J. Smith and Z. Horita
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Thermal effects on the formations of Si and Ge metastable phases during HPT processing2017

    • Author(s)
      Kazuki Kumano , Yoshifumi Ikoma, Kaveh Edalati, Katsuhiko Saito, Quxin Guo and Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 巨大ひずみ加工を施したゲルマニウムの微細組織観察2017

    • Author(s)
      生駒嘉史、熊野良紀、Kaveh Edalati、堀田善治、Martha R. McCartney, David J. Smith
    • Organizer
      日本金属学会 2017年春期(第160回)講演大会
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Upsizing of Severe Plastic Deformation Process under High Pressure2017

    • Author(s)
      Zenji Horita
    • Organizer
      7th Latin American Conference on Metastable and Nanostructured Materials (NANOMAT 2017)
    • Place of Presentation
      Brotas, SP, Brazil
    • Year and Date
      2017-03-19
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Microstructure Analysis of Bulk Nanograined Germanium Obtained by High-Pressure Torsion: Temperature Dependence2017

    • Author(s)
      Y. Ikoma, K. Kumano, B. Chon, K. Edalati, M. R. McCartney, D. J. Smith, and Z. Horita
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Microstructure control using pressure-induced allotropy for enhanced mechanical properties2017

    • Author(s)
      Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Developing Incremental-Feeding Technique in High-Pressure Sliding for Upsizing Inconel718 Sheet with Superplastic Property2017

    • Author(s)
      Yoichi Takizawa, Kosei Sumikawa, Manabu Yumoto, Yoshiharu Otagiri and Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Ultrafine grain structure obtained in Al-Fe alloys by high-pressure torsion: thermal stability and mechanical properties2017

    • Author(s)
      A. Duchaussoy, X. Sauvage, K. Edalati, Z. Horita, G. Renou, A. Deschamps and F. De Geuser
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 巨大ひずみ加工による多機能性合金の開発2017

    • Author(s)
      堀田善治
    • Organizer
      日本金属学会2017年春期(第160回)講演大会
    • Place of Presentation
      首都大学東京南大沢キャンパス
    • Year and Date
      2017-03-15
    • Invited
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Fabrication of high-strength Al-2%Fe alloy through grain refinement by High-Pressure Torsion using upsized ring samples2017

    • Author(s)
      Takahiro Masuda and Zenji Horita
    • Organizer
      The 7th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD7)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Evaluation of Real Achievable Pressure in High-Pressure Torsion2017

    • Author(s)
      Kaveh Edalati, Dong Jun Lee, Takashi Nagaoka, Makoto Arita, Hyoung Seop Kim, Zenji Horita, Reinhard Pippan
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Influence of intermetallic particles fragmentation on thermal stability and mechanical properties of an Al-Fe alloy deformed by HPT2017

    • Author(s)
      A. Duchaussoy, X. Sauvage, K. Edalati, Z. Horita, G. Renou, A. Deschamps, and F. De Geuser
    • Organizer
      International Union of Materials Research Societies The International Conference on Advanced Materials (IUMRS-ICAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Upscaling of Severe Plastic Deformation under High Pressure2017

    • Author(s)
      Zenji Horita
    • Organizer
      International workshop, Design of nanostructured alloys using severe plastic deformation for enhanced functionality
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] TEM observations of Ge processed by high-pressure torsion2017

    • Author(s)
      Yoshifumi Ikoma, Kazuki Kumano, Kaveh Edalati, Martha R. McCartney,David J. Smith and Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Mechanical properties and microstructures of extremely strengthened A2024 alloy produced by High-Pressure Torsion and subsequent aging2017

    • Author(s)
      Takahiro Masuda, Xavier Sauvage, Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2017 (GSAM2017)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Development of New Mg4NiPd Hydrogen Storage Materials Using High-Pressure Torsion Method2016

    • Author(s)
      植弘量子, Kaveh Edalati, Hoda Emami, Hai-Wen Li, 有田誠, 秋葉悦男, 堀田善治
    • Organizer
      日本金属学会2016年春期(第158回)講演大会
    • Place of Presentation
      東京理科大学 葛飾キャンパス
    • Year and Date
      2016-03-23
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] 微細粒組織を有するVの機械的性質および耐水素脆性の評価2016

    • Author(s)
      日高純真,岩岡秀明,有田誠,堀田善治,松本佳久
    • Organizer
      日本金属学会・日本鉄鋼協会・軽金属学会九州支部共催平成28年度合同学術講演大会
    • Place of Presentation
      九州大学,筑紫キャンパス
    • Year and Date
      2016-06-11
    • Data Source
      KAKENHI-PROJECT-15H04148
  • [Presentation] Role of Grain Boundary for Hydrogen Diffusion in FCC-Pd and BCC-Fe2016

    • Author(s)
      Hideaki Iwaoka, Makoto Arita, Zenji Horita
    • Organizer
      2016 International Hydrogen Conference
    • Place of Presentation
      Grand Teton Lodge, Moran, WY, USA
    • Year and Date
      2016-09-11
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Electrical resistivities of nanograined Si produced by severe plastic deformation using high-pressure torsion2016

    • Author(s)
      Bumsoo Chon, Yuta Fukushima, Yoshifumi Ikoma, Zenji Horita
    • Organizer
      日本金属学会2016年春期(第158回)講演大会
    • Place of Presentation
      東京理科大学 葛飾キャンパス
    • Year and Date
      2016-03-23
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Influence of HPT on Hydrogen Storage Performance of TiFe-Mn Compounds2016

    • Author(s)
      Kaveh Edalati, Motoaki Matsuo, Hoda Emami, Ali Alhamidi, Aleksandar Staykov, David J. Smith, Shin-ichi Orimo, Etsuo Akiba, Zenji Horita
    • Organizer
      日本金属学会2016年春期(第158回)講演大会
    • Place of Presentation
      東京理科大学 葛飾キャンパス
    • Year and Date
      2016-03-23
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] 巨大ひずみ加工による材料改質と高性能化に関する研究2016

    • Author(s)
      堀田善治
    • Organizer
      日本金属学会2016年秋期(第159回)講演大会
    • Place of Presentation
      大阪大学豊中キャンパス
    • Year and Date
      2016-09-21
    • Invited
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Enhanced atomic diffusion by severe plastic deformation2016

    • Author(s)
      Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2016 (GSAM2016)
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe plastic deformation under high pressure for enhanced mechanical and functional properties2016

    • Author(s)
      Zenji Horita
    • Organizer
      2016 Nanomaterials Workshop
    • Place of Presentation
      Nanjing University of Science and Technology, Nanjing, China
    • Year and Date
      2016-06-06
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Balanced mechanical properties of Co-Cr-Mo alloys processed by high-pressure torsion and subsequent short-time solution treatment and characterization of their microstructures2016

    • Author(s)
      Murat ISIK, Mitsuo Niinomi, Huihong Liu, Masaaki Nakai, Ken Cho, Zenji Horita, Takayuki Narushima
    • Organizer
      日本金属学会2016年春期(第158回)講演大会
    • Place of Presentation
      東京理科大学 葛飾キャンパス
    • Year and Date
      2016-03-23
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] HPT加工を施したゲルマニウムの準安定相形成2016

    • Author(s)
      生駒嘉史、熊野良紀、Kaveh Edalati、堀田善治、齊藤勝彦、郭 其新
    • Organizer
      日本金属学会2016年春期(第158回)講演大会
    • Place of Presentation
      東京理科大学 葛飾キャンパス
    • Year and Date
      2016-03-23
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Production of nanograined ZnTe by severe plastic deformation under high pressure2016

    • Author(s)
      Yoshifumi Ikoma, Yoshimasa Ejiri, Katsuhiko Saito, Qixin Guo, Zenji Horita
    • Organizer
      The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-9)
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] High-Pressure Torsion from 1935 to 19882016

    • Author(s)
      Kaveh Edalati, Zenji Horita
    • Organizer
      TMS2016 145th Annual Meeting & Exhibition
    • Place of Presentation
      Nashville, Tennessee,USA
    • Year and Date
      2016-02-14
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Hydrogen storage performance of TiFe-based compounds processed by HPT2016

    • Author(s)
      Kaveh EDALATI, Motoaki MATSUO, Hoda EMAMI, Shota ITANO, Ali ALHAMIDI, Aleksandar STAYKOV, David J. SMITH, Shin-ichi ORIMO, Etsuo AKIBA, Zenji HORITA
    • Organizer
      The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-9)
    • Place of Presentation
      Kyoto International Conference Center
    • Year and Date
      2016-08-01
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] 巨大ひずみ加工による 材料の高性能化2016

    • Author(s)
      堀田善治
    • Organizer
      第48回材料研究会研究発表会
    • Place of Presentation
      富山大学工学部
    • Year and Date
      2016-02-09
    • Invited
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 巨大ひずみ加工を利用した材料組織制御と高機能化2016

    • Author(s)
      堀田善治
    • Organizer
      SPring-8シンポジウム2016
    • Place of Presentation
      関西学院大学 神戸三田キャンパス
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Simultaneous strengthening due to grain refinement by severe plastic deformation and fine precipitation by subsequent aging2016

    • Author(s)
      Zenji Horita
    • Organizer
      Workshop: Severely plastically deformed Aluminium alloys Processing, microstructures and properties, SIMAP
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Phase transformation and thermal stability of metastable ω-phase of pure Ti and Zr processed by high-pressure torsion2016

    • Author(s)
      Makoto Arita, Takashi Nagaoka, Yuuki Yoshimatsu, Rin Haraguchi, Kaveh Edalati, and Zenji Horita
    • Organizer
      The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-9)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Production of Nanograined Ge Using Severe Plastic Deformation under High Pressure2016

    • Author(s)
      Yoshifumi Ikoma, Takamitsu Toyota, Katsuhiko Saito, Qixin Guo, Zenji Horita
    • Organizer
      TMS2016 145th Annual Meeting & Exhibition
    • Place of Presentation
      Nashville, Tennessee,USA
    • Year and Date
      2016-02-14
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Phase transformation and electrical resistivity of titanium and zirconium disks processed by high-pressure torsion2016

    • Author(s)
      Makoto Arita, T. Nagaoka, Y. Yoshimatsu, R. Haraguchi, K. Edalati, Z. Horita
    • Organizer
      Engineering Mechanics Institute Conference (2016EMI-IC)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] HPS加工を施した純チタン及びジルコニウムの相変態解析2016

    • Author(s)
      原口琳、 渡部恭平、 増田高大、瀧沢陽一、 有田誠、 堀田善治、Kaveh Edalati、湯本学 小田切吉治
    • Organizer
      日本金属学会 2016年秋期(第159回)講演大会
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Scaling up of high-pressure torsion and production of superplastic Mg alloys2016

    • Author(s)
      Takahiro Masuda and Zenji Horita
    • Organizer
      The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-9)
    • Place of Presentation
      Kyoto International Conference Center
    • Year and Date
      2016-08-01
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Hydrogen storage materials for energy saving and low CO2 emission: microstructural refinement by HPT for high performance2016

    • Author(s)
      Zenji Horita
    • Organizer
      International Symposium, Energies marines
    • Place of Presentation
      Caen, France
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Investigation of electrical resistivities of nanograined Si produced by high-pressure torsion2016

    • Author(s)
      Bumsoo Chon, Masamichi Kohno, Junichiro Shoimi, Yoshifumi Ikoma and Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials in 2016 (GSAM2016)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 低温HPT加工によるゲルマニウム準安定相形成への影響2016

    • Author(s)
      熊野良紀、生駒嘉史、堀田善治、Kaveh Edalati、齊藤勝彦、郭其新
    • Organizer
      日本金属学会 2016年秋期(第159回)講演大会
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 巨大ひずみ加工による 材料の高性能化2016

    • Author(s)
      堀田善治
    • Organizer
      第48回材料研究会研究発表会
    • Place of Presentation
      富山大学工学部
    • Year and Date
      2016-02-09
    • Invited
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] HPT加工による準安定相ナノ結晶ゲルマニウム形成と温度依存性2016

    • Author(s)
      熊野良紀、生駒嘉史、堀田善治、Kaveh Edalati、齊藤勝彦、郭其新
    • Organizer
      日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部 平成28年度合同学術講演会
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Electrical characteristics of bulk nanocrystalline Si processed by high-pressure torsion2016

    • Author(s)
      Bumsoo CHON, Yoshifumi IKOMA, Zenji HORITA
    • Organizer
      日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部 平成28年度合同学術講演会
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe Plastic Deformation under High Pressure: Scaling-up of high-pressure sliding for grain refinement and enhanced mechanical properties2016

    • Author(s)
      Yoichi Takizawa, Takahiro Masuda, Kazushige Fujimitsu, Takahiro Kajita, Kyohei Watanabe, Manabu Yumoto, Yoshiharu Odagiri, Zenji Horita
    • Organizer
      Engineering Mechanics Institute Conference (2016EMI-IC)
    • Place of Presentation
      Metz, France
    • Year and Date
      2016-10-25
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Production of high-performance hydrogen storage materials using process of severe plastic deformation under high pressure2016

    • Author(s)
      Zenji Horita
    • Organizer
      9 th NATIONAL SEMINAR OF METALLURGY AND MATERIALS (SENAMM IX)
    • Place of Presentation
      University of Sultan Ageng Tirtayasa, Indonesia.
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Electrical characteristics of bulk nanocrystalline Si processed by high-pressure torsion2016

    • Author(s)
      Bumsoo Chon, Yuta Fukushima, Yoshifumi Ikoma, Zenji Horita
    • Organizer
      The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-9)
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧ねじり加工を施したバナジウム水素透過膜の耐水素脆性向上2016

    • Author(s)
      岩丸尚輝,日高純真,岩岡秀明,有田誠,堀田善治,松本佳久
    • Organizer
      日本金属学会2016年秋期(第159回)講演大会
    • Place of Presentation
      大阪大学,豊中キャンパス
    • Year and Date
      2016-09-21
    • Data Source
      KAKENHI-PROJECT-15H04148
  • [Presentation] High Resolution TEM Observation of Nanocrystalline Silicon Fabricated by High Pressure Torsion (HPT)2015

    • Author(s)
      Y. Fukushima, K. Edalati, Y. Ikoma, Z. Horita, D. J. Smith
    • Organizer
      Microscopy & Microanalysis 2015 Meeting (M&M 2015)
    • Place of Presentation
      Portland, Oregon, USA
    • Year and Date
      2015-08-02
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Developing High-Performance Structural and Functional Materials Using Severe Plastic Deformation under High Pressure2015

    • Author(s)
      Zenji Horita
    • Organizer
      International Materials Research Congress (IMRC)
    • Place of Presentation
      Cancun, Mexico
    • Year and Date
      2015-08-16
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Microstructural evolution and mechanical properties of Co-Cr-Mo alloys subjected to high pressure torsion and short-time solution treatment2015

    • Author(s)
      Murat ISIK, Mitsuo Niinomi, Huihong Liu, Masaaki Nakai, Ken Cho, Zenji Horita
    • Organizer
      2015 Fall Annual (157th) Meeting, JIM
    • Place of Presentation
      九州大学伊都キャンパス
    • Year and Date
      2015-09-16
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe plastic deformation under high pressure for enhanced performance of bulk nanomaterials: Introduction of International Research Center2015

    • Author(s)
      Zenji Horita
    • Organizer
      International Workshop of Giant Straining Process for Advanced Materials in 2015 (GSAM2015)
    • Place of Presentation
      Dai-hakata Bldg. Room 1204, Fukuoka
    • Year and Date
      2015-09-03
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Potential of Metastable Mg-Ti Phases Produced by HPT for Hydrogen Storage2015

    • Author(s)
      Kaveh Edalati, Aleksandar Staykov, David J.Smith, Etsuo Akiba, Zenji Horita
    • Organizer
      2015 Fall Annual (157th) Meeting, JIM
    • Place of Presentation
      Kyushu University Ito Campus
    • Year and Date
      2015-09-16
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] HPT加工によるバルクナノ結晶粒ZnTeの作製2015

    • Author(s)
      生駒 嘉史、江尻 幸賢、堀田 善治、齊藤 勝彦、郭 其新
    • Organizer
      日本金属学会2015年秋期講演大会
    • Place of Presentation
      九州大学伊都キャンパス
    • Year and Date
      2015-09-16
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Production of Mg-Ti alloys by HPT for hydrogen storage2015

    • Author(s)
      Kaveh Edalati, Hoda Emami, Aleksander Staykov, David J Smith, 秋葉 悦男, 堀田 善治
    • Organizer
      日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部・北九州市 共催 平成27年度合同学術講演会
    • Place of Presentation
      北九州国際会議場
    • Year and Date
      2015-06-06
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] Developing High-Performance Structural and Functional Materials Using Severe Plastic Deformation under High Pressure2015

    • Author(s)
      Zenji Horita
    • Organizer
      International Materials Research Congress (IMRC)
    • Place of Presentation
      Cancun, Mexico
    • Year and Date
      2015-08-16
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 温間高圧巨大ひずみ加工を施したZnO ナノ粉末の相変態2015

    • Author(s)
      長岡 孝、Kaveh Edalati、有田 誠、堀田 善治
    • Organizer
      日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部・北九州市 共催 平成27 年度合同学術講演会
    • Place of Presentation
      北九州国際会議場
    • Year and Date
      2015-06-06
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧巨大ひずみ加工に伴うZrの相変態と電気抵抗測定2015

    • Author(s)
      原口 琳、吉松 佑樹、長岡 孝、有田 誠、堀田 善治
    • Organizer
      日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部・北九州市 共催 平成27 年度合同学術講演会
    • Place of Presentation
      北九州国際会議場
    • Year and Date
      2015-06-06
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe plastic deformation under high pressure for enhanced performance of bulk nanomaterials: Introduction of International Research Center2015

    • Author(s)
      Zenji Horita
    • Organizer
      International Workshop of Giant Straining Process for Advanced Materials in 2015 (GSAM2015)
    • Place of Presentation
      Dai-hakata Bldg. Room 1204, Fukuoka
    • Year and Date
      2015-09-03
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Observation of HPT-processed nanocrystalline silicon2015

    • Author(s)
      Yuta Fukushima, Kaveh Edalati, Yoshifumi Ikoma, David J. Smith, Zenji Horita
    • Organizer
      International Workshop on Giant Straining Process for Advanced Materials (GSAM2015)
    • Place of Presentation
      Dai-hakata Bldg. Room 1204, Fukuoka
    • Year and Date
      2015-09-03
    • Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Formation of metastable phases and nanograined silicon by severe plastic deformation under high pressure2015

    • Author(s)
      Yoshifumi Ikoma, Katsuhiko Saito, Qixin Guo, Zenji Horita
    • Organizer
      11th China SoG Silicon and PV Power Conference
    • Place of Presentation
      中国・杭州市
    • Year and Date
      2015-11-25
    • Invited / Int'l Joint Research
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 巨大ひずみ加工を利用した水素貯蔵特性の向上2015

    • Author(s)
      堀田 善治
    • Organizer
      日本金属学会2015年秋期講演大会
    • Place of Presentation
      九州大学伊都キャンパス
    • Year and Date
      2015-09-16
    • Invited
    • Data Source
      KAKENHI-PROJECT-15K14183
  • [Presentation] HPT加工したナノ結晶シリコンの高分解能観察2015

    • Author(s)
      福島 悠太、Kaveh Edalati、生駒 嘉史、David J. Smith、堀田 善治
    • Organizer
      日本金属学会2015年秋期講演大会
    • Place of Presentation
      九州大学伊都キャンパス
    • Year and Date
      2015-09-16
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧ねじり(HPT)加工したナノ結晶Siの高分解能観察2015

    • Author(s)
      福島 悠太, Kaveh Edalati, 生駒 嘉史, David J. Smith, 堀田 善治
    • Organizer
      第57回日本顕微鏡学会九州支部学術講演会
    • Place of Presentation
      九州大学筑紫キャンパス
    • Year and Date
      2015-11-21
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Advanced electron microscopy: characterization of bulk nanostructured materials2014

    • Author(s)
      Zenji Horita
    • Organizer
      40th Celebraci&oacute;n de la Microscop&iacute;a Electr&oacute;nica en Costa Rica
    • Place of Presentation
      Electron Microscopy Center at University of Costa Rica
    • Year and Date
      2014-11-10
    • Invited
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Advanced electron microscopy: characterization of bulk nanostructured materials produced by severe plastic deformation2014

    • Author(s)
      Zenji Horita
    • Organizer
      40th Celebraci&oacute;n de la Microscop&iacute;a Electr&oacute;nica en Costa Rica
    • Place of Presentation
      CIEMIC, San Jose, Costa Rica
    • Year and Date
      2014-11-10
    • Invited
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Presentation] Tiの相変態に伴う電気抵抗分布観察2014

    • Author(s)
      吉松佑樹、長岡 孝、K. Edalati、有田 誠、堀田善治
    • Organizer
      第91回軽金属学会九州支部例会
    • Place of Presentation
      福岡県福岡市、リファレンス駅東ビル
    • Year and Date
      2014-08-01
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Severe plastic deformation for production of high electrical conductivity with enhanced mechanical strength2013

    • Author(s)
      Zenji Horita
    • Organizer
      2nd International Conference on Materials for Energy - EnMat II
    • Place of Presentation
      Convention Center Karlsruhe, Germany
    • Invited
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Presentation] Severe plastic deformation for production of high electrical conductivity with enhanced mechanical strength2013

    • Author(s)
      Zenji Horita
    • Organizer
      2nd International Conference on Materials for Energy - EnMat II
    • Place of Presentation
      Convention Center Karlsruhe, Germany
    • Invited
    • Data Source
      KAKENHI-PROJECT-25630330
  • [Presentation] Ultrafine-Grained Structures and Superplasticity after Processing by Severe Plastic Deformation2013

    • Author(s)
      Zenji Horita
    • Organizer
      International Symposium on Strength of Fine Grained Materials &#8211; 60 years of Hall-Petch
    • Place of Presentation
      東京大学
    • Invited
    • Data Source
      KAKENHI-ORGANIZER-22102001
  • [Presentation] High-Pressure Torsion for Production of Bulk Nanostructured Materials2012

    • Author(s)
      Zenji Horita
    • Organizer
      The 7th International Conference on the Physical Properties and Application of Advanced Materials (ICPMAT2012)
    • Place of Presentation
      Trondheim, Norway
    • Year and Date
      2012-06-17
    • Invited
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Presentation] The 4th German-Japanese Symposium on Nanostructures. The 4th International Symposium on Nanostructures OZ-112011

    • Author(s)
      Z.Horita
    • Organizer
      Nanostructures OZ-11
    • Place of Presentation
      Kusatsu Kyoto (Ritsumeikan University)
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Presentation] Application of high-pressure torsion to superconducting MgB_2 for improving critical current density2010

    • Author(s)
      H.Iwaoka, Z.Horita
    • Organizer
      International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
    • Place of Presentation
      Fukuoka, Japan
    • Data Source
      KAKENHI-PROJECT-21656176
  • [Presentation] Severe plastic deformation under high pressure for production of multifunctional properties2010

    • Author(s)
      Zenji Horita
    • Organizer
      International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
    • Place of Presentation
      Fukuoka, Japan
    • Data Source
      KAKENHI-PROJECT-21656176
  • [Presentation] HPT加工によるMgB_2の組織制御2010

    • Author(s)
      岩岡秀明、堀田善治
    • Organizer
      第147回日本金属学会秋期講演大会
    • Place of Presentation
      北海道大学 札幌
    • Data Source
      KAKENHI-PROJECT-21656176
  • [Presentation] Severe plastic deformation under high pressure for production of multifunctional properties2010

    • Author(s)
      Zenji Horita
    • Organizer
      International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
    • Place of Presentation
      Fukuoka, Japan
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Presentation] Conditions for Grain Refinement Using Severe Plastic Deformation2009

    • Author(s)
      Z. Horita
    • Organizer
      The International Symposium on Bulk Nanostructured Materials (BNM2009): from Fundamentals to Innovations, 2009, USATU, Ufa, Russia
    • Place of Presentation
      Keynote speaker
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] High pressure sliding for grain refinement of rectangular thin metallic sheets2009

    • Author(s)
      Zenji Horita
    • Organizer
      International Conference on Processing & Manufac turing of Advanced Materials (THERMEC'2009)
    • Place of Presentation
      Berlin, Germany
    • Year and Date
      2009-08-28
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] Use of Ring Sample for High- Pressure Torsion and Microstructural Evolution with Equivalent Strain.2008

    • Author(s)
      Y. Ito, Y. Harai, T. Fujioka, K. Edalati, Z. Horita
    • Organizer
      The 4th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD4)
    • Place of Presentation
      Goslar, Germany
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] Use of Ring Sample for High- Pressure Torsion and Microstructural Evolution with Equivalent Strain2008

    • Author(s)
      Y. Ito, Y. Harai, T. Fujioka, K. Edalati and Z. Horita
    • Organizer
      The 4th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD4)
    • Place of Presentation
      Goslar , Germany
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Presentation] Grain Refining Mechanism of Pure Al Using Severe Plastic Deformation2008

    • Author(s)
      Zenji Horita
    • Organizer
      THE 11th INTERNATIONAL SYMPOSIUM ON PHYSICS OF MATERIALS (ISPMA11)
    • Place of Presentation
      Prague, Czech Republic
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Presentation] Conditions for Grain Refinement Using Severe Plastic Deformation2008

    • Author(s)
      Zenji Horita
    • Organizer
      The 4th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD41
    • Place of Presentation
      Goslar, Germany
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] Grain Refinement of Pure Metals Using High-Pressure Torsion2008

    • Author(s)
      Z. Horita
    • Organizer
      International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
    • Place of Presentation
      Fukuoka, Japan
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] Grain Refinement of Pure Metals Using High-Pressure Torsion2008

    • Author(s)
      Z. Horita
    • Organizer
      International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
    • Place of Presentation
      Fukuoka,Japan
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Presentation] Microstructural Evolution of Pure Aluminum and Pure Copper in Severe Plastic Deformaion2007

    • Author(s)
      Zenjim, Horita
    • Organizer
      The Sixth Pacific Rim International Conference on Advanced Materials and Processing(PRICM-6)
    • Place of Presentation
      ICC Jeju, Jeju Island, Korea
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Presentation] Conditions for Grain Refinement Using Severe Plastic Deformation.2007

    • Author(s)
      Z. Horita
    • Organizer
      The International Symposium on Bulk Nanostructured Materials (BNM2007): from Fundamentals to Innovations, 2007
    • Place of Presentation
      USATU, Ufa, Russia
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] Characterization of precipitates by three-dimensional electrontomography(招待講演)2007

    • Author(s)
      Kenji Kaneko, Keisuke Sato, Zenji Horita, Koji Inoke
    • Organizer
      The 6th Pacific Rim International Conference on Advanced Materials and Processing
    • Place of Presentation
      韓国済州島
    • Year and Date
      2007-11-06
    • Data Source
      KAKENHI-PROJECT-19360317
  • [Presentation] Conditions for Grain Refinement Using Severe Plastic Deformation2007

    • Author(s)
      Zenji, Horita
    • Organizer
      Bulk Nanostructured Materials(BNM2007)
    • Place of Presentation
      Ufa, Russia
    • Data Source
      KAKENHI-PROJECT-18062006
  • [Presentation] Conditions for Grain Refinement Using Severe Plastic Deformation2007

    • Author(s)
      Z. Horita
    • Organizer
      The International Symposium on Bulk Nanostructured Materials (BNM2007)
    • Place of Presentation
      USATU, Ufa, Russia
    • Data Source
      KAKENHI-PROJECT-18062005
  • [Presentation] 高圧ねじり加工における Ti の相変態に伴う電気抵抗分布観察

    • Author(s)
      吉松佑樹、長岡 孝、K. Edalati、有田 誠、堀田善治
    • Organizer
      日本金属学会2014年秋期(第155回)講演大会
    • Place of Presentation
      名古屋大学東山キャンパス
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Production of Bulk Nanostructured Materials with Enhanced Functionality Using High-Pressure Torsion

    • Author(s)
      Zenji Horita
    • Organizer
      XII International Conference on Nanostructured Materials (NANO 2014)
    • Place of Presentation
      Lomonosov Moscow State University, Moscow, Russia
    • Year and Date
      2014-07-13 – 2014-07-18
    • Invited
    • Data Source
      KAKENHI-ORGANIZER-22102001
  • [Presentation] 高圧スライド加工(HPS)法によるAl 7075合金丸棒材の結晶粒超微細化と超塑性

    • Author(s)
      藤光利茂、堀田善治
    • Organizer
      日本金属学会2014年秋期(第155回)講演大会
    • Place of Presentation
      愛知県名古屋市、名古屋大学
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-25630330
  • [Presentation] Production of Bulk Nanostructured Materials with Enhanced Functionality Using High-Pressure Torsion

    • Author(s)
      Zenji Horita
    • Organizer
      XII International Conference on Nanostructured Materials (NANO 2014)
    • Place of Presentation
      Lomonosov Moscow State University, Moscow, Russia
    • Year and Date
      2014-07-13 – 2014-07-18
    • Invited
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧ひずみ加工によるバルクシリコンの熱伝導率の低減

    • Author(s)
      田原充、Sivasankaran Harish、生駒嘉史、堀田善治、高田保之、D.G.Cahill、河野正道
    • Organizer
      第35回日本熱物性シンポジウム
    • Place of Presentation
      東京工業大学大岡山キャンパス
    • Year and Date
      2014-11-22 – 2014-11-24
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧スライド加工(HPS)を 利用したAA2024合金の結晶粒微細化と超塑性特性

    • Author(s)
      増田高大、藤光利茂、瀧沢陽一、堀田善治
    • Organizer
      軽金属学会第127回秋期大会
    • Place of Presentation
      東京都目黒区、東京工業大学
    • Year and Date
      2014-11-15 – 2014-11-16
    • Data Source
      KAKENHI-PROJECT-25630330
  • [Presentation] Hydrogen Behavior in Ultrafine-Grained Pure Pradium

    • Author(s)
      Zenji Horita
    • Organizer
      International Conference on Hydrogen Storage Embrittlement and Applications (Hy-SEA 2014)
    • Place of Presentation
      Othon Hotel, Rio de Janeiro, RJ, Brazil
    • Year and Date
      2014-10-26 – 2014-10-30
    • Invited
    • Data Source
      KAKENHI-PLANNED-22102004
  • [Presentation] HPT加工によるバルクナノ結晶GaAsの作製:付与ひずみ・温度依存性

    • Author(s)
      江尻幸賢、生駒嘉史、堀田善治、齊藤勝彦、郭 其新
    • Organizer
      日本金属学会2014年秋期(第155回)講演大会
    • Place of Presentation
      名古屋大学東山キャンパス
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 巨大ひずみ加工を施したZnOの光学特性および 結晶構造解析

    • Author(s)
      長岡孝、吉松佑樹、Kaveh Edalati、有田誠、堀田善治
    • Organizer
      日本金属学会2014年秋期(第155回)講演大会
    • Place of Presentation
      名古屋大学東山キャンパス
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧スライド加工(HPS)を 利用 した均一微細粒マグネシウム棒材の作製

    • Author(s)
      増田高大、藤光利茂、堀田善治
    • Organizer
      日本金属学会2014年秋期(第155回)講演大会
    • Place of Presentation
      名古屋大学東山キャンパス
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-25630330
  • [Presentation] 高圧スライド加工法による7075アルミニウム合金の結晶粒微細化と機械的特性の向上

    • Author(s)
      藤光利茂、瀧沢陽一、堀田善治
    • Organizer
      軽金属学会第127回秋期大会
    • Place of Presentation
      東京都目黒区、東京工業大学
    • Year and Date
      2014-11-15 – 2014-11-16
    • Data Source
      KAKENHI-PROJECT-25630330
  • [Presentation] 超伝導体レニウムにおける巨大ひずみ加工の効果

    • Author(s)
      美藤正樹、松井英明、中村和麿、山口富子、白川直樹、足立大樹、山崎 徹、岩岡 秀明、生駒 嘉史、堀田 善治
    • Organizer
      日本金属学会2014年秋期(第155回)講演大会
    • Place of Presentation
      名古屋大学東山キャンパス
    • Year and Date
      2014-09-24 – 2014-09-26
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] 高圧ねじり加工による純 Ti のw相変態に伴う電気抵抗率分布

    • Author(s)
      吉松佑樹、長岡 孝、K. Edalati、有田 誠、堀田善治
    • Organizer
      軽金属学会第127回秋期大会
    • Place of Presentation
      東京都目黒区、東京工業大学
    • Year and Date
      2014-11-15 – 2014-11-16
    • Data Source
      KAKENHI-PROJECT-26220909
  • [Presentation] Production of Bulk Nanostructured Materials with Enhanced Functionality Using High-Pressure Torsion

    • Author(s)
      Zenji Horita
    • Organizer
      XII International Conference on Nanostructured Materials (NANO 2014)
    • Place of Presentation
      Lomonosov Moscow State University, Moscow, Russia
    • Year and Date
      2014-07-13 – 2014-07-18
    • Invited
    • Data Source
      KAKENHI-PROJECT-25630330
  • [Presentation] Production of Bulk Nanostructured Materials with Enhanced Functionality Using High-Pressure Torsion

    • Author(s)
      Zenji Horita
    • Organizer
      XII International Conference on Nanostructured Materials (NANO 2014)
    • Place of Presentation
      Lomonosov Moscow State University, Moscow, Russia
    • Year and Date
      2014-07-13 – 2014-07-18
    • Invited
    • Data Source
      KAKENHI-PLANNED-22102004
  • 1.  NEMOTO Minoru (90005265)
    # of Collaborated Projects: 23 results
    # of Collaborated Products: 0 results
  • 2.  SANO Takeshi (70037810)
    # of Collaborated Projects: 13 results
    # of Collaborated Products: 0 results
  • 3.  DEN Bunnkai (50223631)
    # of Collaborated Projects: 8 results
    # of Collaborated Products: 0 results
  • 4.  OH-ISHI Keiichiro (70294890)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 5.  MIURA Yasuhiro (80037879)
    # of Collaborated Projects: 6 results
    # of Collaborated Products: 0 results
  • 6.  AMEYAMA Kei (10184243)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 7.  KATO Masaharu (50161120)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 0 results
  • 8.  KANEKO Kenji (30336002)
    # of Collaborated Projects: 2 results
    # of Collaborated Products: 4 results
  • 9.  UMEMOTO Minoru (90111921)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 10.  TODAKA Yoshikazu (50345956)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 11.  OHASHI Tetsuya (80312445)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 12.  NAKATANI Akihiro (50252606)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 13.  MORINAGA Masahiko (50126950)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 14.  KOHYAMA Masanori (60344157)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 15.  NAKASHIMA Kunihiko (10207764)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 16.  SAITO Noritaka (80432855)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 17.  TSUJI Nobuhiro (30263213)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 18.  OGATA Narinobu (20273584)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 19.  SHIMOKAWA Tomotsugu (40361977)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 20.  YANAGIMOTO Jun (90220194)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 21.  TSUTIYA Koichi (50236907)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 22.  YAMASAKI Tohru (30137252)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 23.  MIURA Hiromi (30219589)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 24.  MUNETO Shinji (20380587)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 25.  MATSUMURA Sho (60150520)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 26.  TOMOKIYO Yoshitsugu (40037891)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 27.  FURUKAWA Minoru (90112276)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 28.  NAKAMURA Katsuaki (70363380)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 29.  HISATSUNE Yoshimi (60380581)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 30.  MATSUMOTO Yoshihisa (40219522)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 2 results
  • 31.  木須 隆暢 (00221911)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results
  • 32.  有田 誠 (30284540)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 25 results
  • 33.  生駒 嘉史 (90315119)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 38 results
  • 34.  南部 智憲 (10270274)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 35.  湯川 宏 (50293676)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 36.  河野 正道 (50311634)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results
  • 37.  エダラテイ カベー (60709608)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 14 results
  • 38.  村山 光宏 (90354282)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 1 results
  • 39.  河村 能人 (30250814)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 40.  圓谷 貴夫 (00619869)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 41.  井上 晋一 (30792585)
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 42.  WATANABE masashi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 6 results
  • 43.  EDALATI kaveh
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 76 results
  • 44.  TANAKA isao
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 4 results
  • 45.  MCCARTNEY Martha r
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 46.  SMITH David j
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 47.  TOINO Harumichi
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 48.  MCARTNEY Mar
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 49.  SMUTH David.
    # of Collaborated Projects: 1 results
    # of Collaborated Products: 0 results
  • 50.  美藤 正樹
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 2 results
  • 51.  増田 高大
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 12 results
  • 52.  高島 和希
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 4 results
  • 53.  峯 洋二
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 4 results
  • 54.  塩見 淳一郎
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 55.  宝野 和博
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 56.  岩岡 秀明
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 2 results
  • 57.  加藤 寛敬
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 58.  劉 恢弘
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 59.  伊田 進太郎
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 60.  石原 達己
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 61.  萩原 英久
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 62.  中村 和磨
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 63.  西嵜 照和
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 64.  大槻 東巳
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 65.  山内 美穂
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 66.  折茂 慎一
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results
  • 67.  松尾 元彰
    # of Collaborated Projects: 0 results
    # of Collaborated Products: 1 results

URL: 

Are you sure that you want to connect your ORCID iD to this researcher?
* This action can be performed only by the researcher themselves.

この研究者とORCID iDの連携を行いますか?
※ この処理は、研究者本人だけが実行できます。

Information User Guide FAQ News Terms of Use Attribution of KAKENHI

Powered by NII kakenhi