UMEMOTO Minoru 梅本実

Researcher Number	90111921
Other IDs
External Links
Affiliation (based on the past Project Information) *help	2014: 豊橋技術科学大学, 国際教育センター, 特任教授 2013: 豊橋技術科学大学, 工学(系)研究科(研究院), 教授 2012: 豊橋技術科学大学, 大学院・工学研究科, 教授 2010: Toyohashi University of Technology, 大学院・工学研究科, 教授 1995 – 2009: 豊橋技術科学大学, 工学部, 教授 … More 1997: 豊橋技術科学大学, 生産システム工学系, 教授 1996: Dept.of Production Systems Engineering, Faculty of Engineering, Toyohashi Univ.o, 生産システム系, 教授 1987 – 1993: Toyohashi University of Technology, Faculty of Engineering, 工学部, 助教授 1991 – 1992: Toyohashi University of Technology, Faculty of Engineering, Associate Professor, 工作センター, 助教授 1986: 京大, 工学部, 助手 1986: Kyoto University, Faculty of Engineering, Instructor., 工学部, 助手 Less
Review Section/Research Field	Principal Investigator Structural/Functional materials / Structural/Functional materials / 金属加工(含鋳造) / Material processing/treatments / Material processing/treatments / 金属材料(含表面処理・腐食防食) Except Principal Investigator Science and Engineering / Material processing/treatments / Structural/Functional materials / Structural/Functional materials … More / 金属材料(含表面処理・腐食防食) / 溶接工学 / 金属加工(含鋳造) / Physical properties of metals / Physical properties of metals Less
Keywords	Principal Investigator 強度 / 金属 / 焼結 / 巨大ひずみ / 歪勾配 / メカニカルアロイング / mechanical alloying / 組織 / sintering / 延性 … More / ナノ結晶 / 変態 / ステンレス鋼 / 超微粒子 / Cu / Sm_2Fe_<17> / NdMo_2Fe_<10> / 加圧焼結 / 銅 / 粒成長 / steel / strength / microstructure / ボールミル / セメンタイト / Mg_2Si / Fe_2VAl / 高圧相 / TRIP / ナノクリスタ / AlN / 希土類窒化物磁石 / ナノクリスタル / パイプ圧延 / 混合超微粒子 / 微細結晶粒 / nanocrystal / ultra fine powder / AIN / rear earth nitride magnet / リサイクル / 鋼 / 構造材料 / パ-ライト / 熱力学 / 相変態 / 材料強度 / 駆動力 / 結晶粒界 / 転位 / 強度予測 / recycle / structural material / pearlite / thermodynamics / phase transformation / フラーレン / 機械的性質 / ポリマー / 炭化物 / 液体クロマトグラフィー / fullerene / metal / ball mill / mechanical property / polymer / 鉄鋼 / 合金化 / 機械的特性 / 物理的特性 / cementite / allying / mechanical properties / physical properties / 熱電材料 / 廃熱 / 環境問題 / シリサイド / 低環境負荷 / 熱電 / ゼーベック / thermoelectric material / waste heat / environmental issue / silicide / 強加工 / ショットピーニング / ドリル加工 / 鉄鋼材料 / ドリル / 落錘加工 / 粒子衝撃加工 / Nanocrystalline / Severe plastic deformation / Shot peening / Drilling / Steel / Cementite / 高強度化 / 組織微細化 / 高圧下のねじり試験 / 連続再結晶 / 圧力誘起変態 / GN転位 / 材料 / ひずみ / ひずみ勾配 / ultra large strain / strain gradient / strengthening / grain refinement / high pressure torsion / crystallization / pressure induced transformation / GN dislocation / 急冷凝固 / 単ロール / ステンレス綱 / 電子顕微鏡 / 競合凝固 / 鉄系合金 / rapid solidification / single roll / stainless steel / competitive solidification / 超微細結晶粒 / プラズマパウダ-法 / ニッケル / 金属超微粒子 / 非平衡相 / 固反相応 / メカニカル・アロイング / Ultra fine powder / Ultra fine grain / Plasuma powder method / Sintering / Metal / Grain growth / Cupper / Nickel … More Except Principal Investigator 形状記憶合金 / マルテンサイト変態 / 強加工 / ナノ結晶 / 形状記憶効果 / メカニカルアロイング / mechanical alloying / 傾斜機能材料 / 非晶質 / ショットピーニング / 双晶 / ナノクリスタル / amorphous / 加工熱処理 / 表面改質 / shape memory alloys / martensitic transformation / 反応性プラズマ / プラズマ溶射 / 熱プラズマ / 傾斜機能皮膜 / 窒化チタン / 巨大ひずみ / 高密度格子欠陥 / 形状不変加工 / 表面強化 / クライオミリング / マルテンサイト変換 / 直流プラズマ溶射 / 高周波プラズマ / 反応性プラズマ溶射 / 窒化物系セラミックス / バイアス電圧 / 炭化物系セラミックス / DC Plasma Spraying / RF Plasma / Reactive Plasma Spraying / Nitride Ceramics / Bias voltage / 準安定 / 非平衡 / アモルファス / 粉末冶金 / 非平衝 / metastable / non-equilibrium / nano-crystal / powder metallurgy / ナノ構造 / 層状組織 / 界面反応 / 超微細組織 / メカニカルアロ-イング / nanocrystal / nano structure / lamination / interface reaction / fine grained structure / 鉄鋼材料 / データベース / 拡散係数 / 拡散変態 / 状態図 / マイクロアロイング鋼 / コンピュータシミュレーション / 計算機支援 / Steel / Database / Diffusion coefficient / Diffusion al Transformation / Phase Diagram / Microalloying Steel / Thermo-Mechanical Treatment / Computer Simulation / Al合金基複合材料 / 疲労特性 / 生体用チタン合金 / フラーレン / 非平衡材料 / 複合材料 / 生体材料 / 機能材料 / 水素化触媒材料 / 水素吸蔵合金 / ceramic particles reinforced aluminum composites / fatigue properties / biomedical implant material / thermo-mechanical treatment / fulleren / surface coating / functional gradient materials / スピノーダル分解 / 2方向形状記憶効果 / 反強磁性 / 電気抵抗 / spinodal decomposition / martensitic transfomation / two-way shape memory effect / anti-ferromagnetic transition / 磁区構造 / 磁歪 / 磁性材料 / 磁気変態 / キュリー温度 / 希土類元素 / shape memory alloy / magnetic domain / magnetostriction / 超弾性 / 転位 / superelasticity / severe plastic deformation / nanocrystalline / dislocations / twins / 歪勾配 / HPT(High Pressure Torsion) / 金属材料 / 組織制御 / 高純度鋼 / 焼入性 / 不純物元素 / ジョミニー試験 / 変態kinetics / 成長速度 / 核生成速度 / High-purity steel / Hardenabilty / Impurity element / Jominy test / Transformation kinetics / Growth rate / Fe-Ni-Co-Ti合金 / 熱弾性マルテンサイト / 薄い板状マルテンサイト / 鉄系マルテンサイト / オースエージ / γ'-Ni_3Ti / FeーNiーCoーTi合金 / γ′ーNi_3Ti / γ´-【Ni_3】Ti / Shape Memory Effect / Shape Memory Alloy / Fe-Ni-Co-Ti Alloy / Thermoelastic Martensite / Thin Plate Martensite / Ferrous Martensite / Ausaging Less

Microstructure control by HPT deformation to improve strength and toughness of austenitic stainless steelsPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  2012 – 2014
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Strengthening and toughening of metallic materials by size invariant deformation with an ultra large strain gradient and the clarification of its mechanismPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  2008 – 2010
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
極低温環境用形状記憶アクチュエータの開発
- Principal Investigator
  
  土谷浩一
- Project Period (FY)
  2007 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  National Institute for Materials Science
Production of Advanced Materials Containing High Density Lattice Defects by Precise-Controlled Giant Straining Process
- Principal Investigator
  
  HORITA Zenji
- Project Period (FY)
  2006 – 2008
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Kyushu University
The quantitative evaluation of effect of strain gradient on the strengthening and structure refinement of metals during ultra large strainingPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  2006 – 2007
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
Amorphization/Nanocrystallization of Shape Memory Alloys and Mechanism of Phase Transformation
- Principal Investigator
  
  TSUCHIYA Koichi
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Physical properties of metals
- Research Institution
  Toyohashi University of Technology
巨大ひずみ勾配付与型ショットピーニングによる表面ナノ結晶材料の創製
- Principal Investigator
  
  戸高義一
- Project Period (FY)
  2005 – 2006
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
TiNi系形状記憶合金の表層強加工による非晶質化の機構と生体適合性の評価
- Principal Investigator
  
  THUCHIYA Koichi
- Project Period (FY)
  2004 – 2005
- Research Category
  
  Grant-in-Aid for Scientific Research on Priority Areas
- Review Section
  
  Science and Engineering
- Research Institution
  Toyohashi University of Technology
Improvmemnt of Properties of Ferromagnetic Shape Memory Alloys by Addition of Rare Earth Elements and Mechanism of Giant Magnetostriction
- Principal Investigator
  
  TSUCHIYA Koichi
- Project Period (FY)
  2003 – 2004
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
Study on the formation mechanism of nanocrystalline structure by severe plastic deformation and analysis of its structure in atomic scalePrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  2002 – 2003
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
Development of environmental conservation type thermoelectric device of silicide compounds and their power generation modulesPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  2001 – 2002
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
Research on the properties of bulk cementite prepared by mechanical alloyingPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  2000 – 2001
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
Correlation between spinodal decomposition and shape memory effect in γ-Mn alloys.
- Principal Investigator
  
  TSUCHIYA Koichi
- Project Period (FY)
  1999 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Research Field
  
  Physical properties of metals
- Research Institution
  Toyohashi University of Technology
Joint Research on Advanced Materials Engineering
- Principal Investigator
  
  KOBAYASHI Toshiro
- Project Period (FY)
  1998 – 2000
- Research Category
  
  Grant-in-Aid for Scientific Research (B).
- Research Field
  
  Structural/Functional materials
- Research Institution
  Toyohashi University of Technology
Formation of Fullerene Alloys by Mechanical Alloying and its CharacterizationPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  1997 – 1998
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
Development of Computer-Assisted System for Microstructural Design and Control of Steel
- Principal Investigator
  
  ISHIDA Kiyohito
- Project Period (FY)
  1996 – 1997
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  Tohoku University
Nano-scaled non-equilibrium materials produced by solid state reaction.
- Principal Investigator
  
  SHINGU P.Hideo
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Material processing/treatments
- Research Institution
  KYOTO UNIVERSITY
Designing of the formation process of recyclable eco-steelsPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  1995 – 1996
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Research Field
  
  Structural/Functional materials
- Research Institution
  TOYOHASHI UNIVERSITY OF TECHNOLOGY
反応性プラズマ溶射法による傾斜機能TiN厚膜の作製
- Principal Investigator
  
  FUKUMOTO Masahiro
- Project Period (FY)
  1993
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  Material processing/treatments
- Research Institution
  Toyohashi University of Technology
New Ally Phases with New Properties Produced by the Mechanical Alloying Method
- Principal Investigator
  
  SHINGU Hideo
- Project Period (FY)
  1991 – 1993
- Research Category
  
  Grant-in-Aid for Co-operative Research (A)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  KYOTO UNIVERSITY
Synthesis of Hybrid Materials Surfaces by Means of Reactive Plasma Spraying
- Principal Investigator
  
  OKANE Isao
- Project Period (FY)
  1990 – 1992
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  溶接工学
- Research Institution
  Toyohashi Univ. of Technology
Development of Formation Technique and Chracterization of Nanocrystal Material form Ultra Fine Powder and MA ProcessPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  1990 – 1991
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Toyohashi University of Technology
Formation of bulk material of metastable phase by solid-state reaction of complex ultra fine powders.Principal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  1988 – 1989
- Research Category
  
  Grant-in-Aid for General Scientific Research (B)
- Research Field
  
  金属加工(含鋳造)
- Research Institution
  Toyohashi University of Technology
The microstructure and mechanical properties of rapidly solidified steel sheets produced by single and double roll methodPrincipal Investigator
- Principal Investigator
  
  UMEMOTO Minoru
- Project Period (FY)
  1986 – 1987
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Toyohashi University of Technology
  Kyoto University
Development of New Fe-based Shape Memory Alloy (Fe-Ni-Co-Ti Alloy)
- Principal Investigator
  
  MAKI Tadashi, 田村今男
- Project Period (FY)
  1986 – 1988
- Research Category
  
  Grant-in-Aid for Developmental Scientific Research
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Kyoto University
Research on Hardenability in High-purity Steels
- Principal Investigator
  
  MAKI Tadashi
- Project Period (FY)
  1985 – 1986
- Research Category
  
  Grant-in-Aid for General Scientific Research (C)
- Research Field
  
  金属材料(含表面処理・腐食防食)
- Research Institution
  Kyoto University

All 2015 2014 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 Other

All Journal Article Presentation Book Patent

[Book] 超強加工により形成するナノ・サブミクロン結晶粒組織(資料)2007
- Author(s)
  梅本実
- Total Pages
  43
- Publisher
  (社)日本鉄鋼協会「超強加工の材料科学」研究会シンポジウム超強加工最前線〜強加工の現状と応用
- Data Source
  KAKENHI-PROJECT-18062005
[Journal Article] Orientation relationship between α-phase and high-pressure ω-phase of pure group IV transition metals2015
- Author(s)
  N.Adachi, Y.Todaka,, H.Suzuki, M.Umemoto
- Journal Title
  
  Scripta Materialia
  
  Volume: 98 Pages: 1-4
- DOI
  10.1016/j.scriptamat.2014.10.029
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360306
[Journal Article] Annealing behavior of nano-crystalline austenitic SUS316L produced by HPT2012
- Author(s)
  Hongcai Wang, Innocent Shuro, Minoru Umemoto, Ho-Hung Kuo, Yoshikazu Todaka
- Journal Title
  
  Materials Science & Engineering A
  
  Volume: 556 Pages: 906-910
- DOI
  10.1016/j.msea.2012.07.089
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360306
[Journal Article] Property evolution on annealing deformed 304 austenitic stainless steel2012
- Author(s)
  I. Shuro・H. H. Kuo・Y. Todaka・M. Umemoto
- Journal Title
  
  Journal of Materials Science
  
  Volume: 47 Pages: 8128-8133
- DOI
  10.1007/s10853-012-6708-4
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-24360306
[Journal Article] Fabrication of high strength Cu-NbC composite conductor by high pressure torsion2011
- Author(s)
  B.D.Long, M.Umemoto, Y Todaka, R.Othman, H.Zuhailawati
- Journal Title
  
  Materials Science and Engineering A 528
  
  Pages: 1750-1756
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Fabrication of high strength Cu-NbC composite conductor by high pressure torsion2011
- Author(s)
  B.D.Long, M.Umemoto, Y.Todaka, R.Othman, H.Zuhailawati
- Journal Title
  
  Materials Science and Engineering A
  
  Volume: 528 Pages: 1750-1756
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of strain amount on stabilization of ω-phase in pure Ti by severe plastic deformation under high-pressure torsion, 15th International Conference on the Strength of Materials (ICSMA-15)2010
- Author(s)
  Y Todaka, H Azuma, Y Ohnishi, H Suzuki, M.Umemoto
- Journal Title
  
  Journal of Physics, Conference Series 240
  
  Pages: 12113-12113
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of strain amount on stabilization of ω-phase in pure Ti by severe plastic deformation under high-pressure torsion2010
- Author(s)
  Y Todaka, H Azuma, Y Ohnishi, H Suzuki, M Umemoto
- Journal Title
  
  15th International Conference on the Strength of Materials (ICSMA-15), Journal of Physics
  
  Volume: Conference Series 240 Pages: 12113-12113
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Work-Softening High Pressure Phase Formation and Powder Consolidation by HPT2010
- Author(s)
  Minoru Umemoto, Bui Duc Long, Yoshikazu Todaka, Koichi Tsuchiya
- Journal Title
  
  Materials Science Forum Vols.654-656
  
  Pages: 1205-1210
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Spark plasma sintering of mechanically alloyed in situ copper-niobium carbide composite2010
- Author(s)
  B.D.Long, R.Othman, M.Umemoto, H.Zuhailawati
- Journal Title
  
  Journal of Alloys and Compounds 505
  
  Pages: 510-515
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Anomalous Property Evolution during Annealing in HPTed SUS304 Austenitic Stainless Steel2010
- Author(s)
  Innocent Shuro, Minoru Umemoto, Yoshikazu Todaka, Ho-Hung Kuo, Hongcai Wang
- Journal Title
  
  Materials Science Forum Vols.667-669
  
  Pages: 589-592
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Work-Softening, High Pressure Phase Formation and Powder Consolidation by HPT2010
- Author(s)
  Minoru Umemoto, Bui Duc Long, Yoshikazu Todaka, Koichi Tsuchiya
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.654-656 Pages: 1205-1210
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] マルテンサイト鋼の高速ドリル加工によるドリル穴表層における超微細結晶粒組織形成とその力学特性2010
- Author(s)
  戸高義一, 川畑雄士, Jinguo Li, 田中修二, 小栗和幸, 鈴木正, 梅本実, 土谷浩一
- Journal Title
  
  鉄と鋼 Vol.96
  
  Pages: 21-28
- NAID
  130000151226
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Heterogeneous process of disordering and structural refinement in Ni_3Al during severe plastic deformation by high-pressure torsion2010
- Author(s)
  O.Ciuca, K.Tsuchiya, Y.Yokoyama, Y.Todaka, M.Umemoto
- Journal Title
  
  Materials Transactions Vol.51
  
  Pages: 14-22
- NAID
  10026264307
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Phase Transformation and Annealing Behavior of SUS 304 Austenitic Stainless Steel Deformed by High Pressure Torsion2010
- Author(s)
  Innocent Shuro, Minoru Umemoto, Yoshikazu Todaka, Seiji Yokoyama
- Journal Title
  
  Materials Science Forum Vols.654-656
  
  Pages: 334-337
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Structural rejuvenation in a bulk metallic glass induced by severe plastic deformation2010
- Author(s)
  W.Dmowskia, Y.Yokoyama, Chuanga, Y.Renc, M.Umemoto, K.Tsuchiya, A.Inoue, T.Egami
- Journal Title
  
  Acta Materialia
  
  Volume: Volume 58, Issue 2 Pages: 429-438
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Phase Transformation and Annealing Behavior of SUS 304 Austenitic Stainless Steel Deformed by High Pressure Torsion2010
- Author(s)
  Innocent Shuro, Minoru Umemoto, Yoshikazu Todaka, Seiji Yokoyama
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.654-656 Pages: 334-337
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Hydrogen embrittlement of submicrocrystalline ultra-low carbon steel produced by high-pressure torsion straining2010
- Author(s)
  Y Todaka, K.Morisako, M.Kumagai, Y.Matsumoto, M.Umemoto
- Journal Title
  
  Advanced Materials Research Vols.89-91
  
  Pages: 763-768
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Spark plasma sintering of mechanically alloyed in situ copper-niobium carbide composite2010
- Author(s)
  B.D.Long, R.Othman, M.Umemoto, H.Zuhailawati
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 505 Pages: 510-515
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Fabrication of ZrAlNiCu bulk metallic glass composites containing pure copper particles by high-pressure torsion2010
- Author(s)
  Y.F.Suna, H.Fujii, N.Tsuji, Y Todaka, M.Umemoto
- Journal Title
  
  Journal of Alloys and Compounds 492
  
  Pages: 149-152
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Anomalous Property Evolution during Annealing in HPTed SUS 304 Austenitic Stainless Steel2010
- Author(s)
  Innocent Shuro, Minoru Umemoto, Yoshikazu Todaka, Ho-Hung Kuo, Hongcai Wang
- Journal Title
  
  Materials Science Forum
  
  Volume: Vols.667-669 Pages: 589-592
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Heterogeneous process of disordering and structural refinement in Ni3Al during severe plastic deformation by high-pressure torsion2010
- Author(s)
  Ciuca, K.Tsuchiya, Y.Yokoyama, Y Todaka, M.Umemoto
- Journal Title
  
  Materials Transactions Vol.51
  
  Pages: 14-22
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Hydorogen embrittlement of submicrocrystalline ultra-low carbon steel produced by high-pressure torsion straining2010
- Author(s)
  Y.Todaka, K.Morisako, M.Kumagai, Y.Matsumoto, M.Umemoto
- Journal Title
  
  Advanced Materials Research Vols.89-91
  
  Pages: 763-768
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Structural rejuvenation in a bulk metallic glass induced by severe plastic deformation2010
- Author(s)
  W.Dmowskia, Y.Yokoyama, Chuanga, Y.Renc, M.Umemoto, K.Tsuchiya, A.Inoue, T.Egami
- Journal Title
  
  Acta Materialia Volume58, Issue2
  
  Pages: 429-438
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Fabrication of ZrAlNiCu bulk metallic glass composites containing pure copper particles by high-pressure torsion2010
- Author(s)
  Y.F.Suna, H.Fujii, N.Tsuji, Y.Todakad, M.Umemoto
- Journal Title
  
  Journal of Alloys and Compounds
  
  Volume: 492 Pages: 149-152
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Texture evolution in pure aluminum subjected to monotonic and reversal straining in high pressure torsion2009
- Author(s)
  D.Orlov, P.P.Bhattacharjee, Y.Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Scripta Materialia Vol.60
  
  Pages: 893-896
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] 切削加工により鉄鋼材料表面に形成されたナノ結晶粒組織2009
- Author(s)
  戸高義一, 梅本実, 李金国, 川畑雄士, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14 No.1
  
  Pages: 26-26
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] 超強加工による炭素鋼中のセメンタイトの変形と分解2009
- Author(s)
  戸高義一, 梅本実, 大野哲史, 鈴木真由美, 川畑雄士, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14 No.1
  
  Pages: 28-28
- NAID
  10024024449
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Structural refinement of Ni3Al intermetallic compound by high-pressure torsion, Processing and Fabrication Advanced Materials-XVIII2009
- Author(s)
  O.Ciuca, K.Tsuchiya, Y.Yokoyama, Y Todaka, M.Umemoto
- Journal Title
  
  eds : M.Niinomi, M.Morinaga, M.Nakai, N.Bhatnagar, T.S.Srivatsan Vol.4
  
  Pages: 1915-1924
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] HPT加工により作製したサブミクロン結晶粒IF鋼の微細組織2009
- Author(s)
  戸高義一, 梅本実, 好井美樹, 熊谷匡明, 土谷浩一
- Journal Title
  
  ふぇらむ 14(1)
  
  Pages: 14-14
- NAID
  10024024387
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Nanocrystallization of β-titanium Alloys by High-pressure Torsion, Processing and Fabrication Advanced Materials-XVIII2009
- Author(s)
  S.Farjami, K.Tsuchiya, Y Todaka, M.Umemoto
- Journal Title
  
  eds : M.Niinomi, M.Morinaga, M.Nakai, N.Bhatnagar, T.S.Srivatsan Vol.3
  
  Pages: 1053-1060
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] 切削加工により鉄鋼材料表面に形成したナノ結晶粒組織2009
- Author(s)
  戸高義一, 梅本実, 李金国, 川畑雄士, 土谷浩一
- Journal Title
  
  ふぇらむ 14(1)
  
  Pages: 26-26
- NAID
  10024024444
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Production of TiNi amorphous/nanocrystalline wires with high strength and elastic modulus by severe cold drawing2009
- Author(s)
  K.Tsuchiya, Y.Hada, T.Koyano, K.Nakajima, M.Ohnuma, T.Koike, Y Todaka, M.Umemoto
- Journal Title
  
  Scripta Materialia Vol.60
  
  Pages: 749-752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Plastic flow and grain refinement under simple shear-based severe plastis deformation processing2009
- Author(s)
  D.Orlov, Y.Todaka, M.Umemoto, Y.Beygelzimer, Z.Horita, N.Tsuji
- Journal Title
  
  Materials Science Forum Vols.604-605
  
  Pages: 171-178
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] HPT加工により作成したサブミクロン結晶粒IF鋼の微細組織2009
- Author(s)
  戸高義一, 梅本実, 好井美樹, 熊谷匡明, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14 No.1
  
  Pages: 14-14
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Role of strain reversal in grain refinement by severe plastic deformation2009
- Author(s)
  Dmitry Orlova, Yoshikazu Todaka, Minoru Umemoto, Nobuhiro Tsuji
- Journal Title
  
  Materials Science and Eng.A 499
  
  Pages: 427-433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of hydrogen on mechanical properties of submicrocrystalline ultra-low carbon steel produced by highpressure torsion straining, Processing and Fabrication Advanced Materials-XVIII2009
- Author(s)
  K.Morisako, Y Todaka, M.Kumagai, Y.Matsumoto, M.Umemoto
- Journal Title
  
  eds : M.Niinomi, M.Morinaga, M.Nakai, N.Bhatnagar, T.S.Srivatsan Vol.4
  
  Pages: 1875-1884
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Severe pastic deformation of Zr-Cu-Al metallic glass in As-cast and crystallized conditions, Processing and Fabrication Advanced Materials- XVIII2009
- Author(s)
  K.Tsuchiya, S.Yamamoto, Y.Yokoyama, H.Kato, Y Todaka, M.Umemoto
- Journal Title
  
  eds : M.Niinomi, M.Morinaga, M.Nakai, N.Bhatnagar, T.S.Srivatsan Vol.4
  
  Pages: 1865-1874
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Fabrication of CuZr(Al) bulk metallic glasses by highpressure torsion2009
- Author(s)
  Y.F.Sun, T.Nakamura, Y Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Intermetallics Vol.17
  
  Pages: 256-261
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Formation of ultrafine-grained structure at worn surface in carbon steel by wearing process, Processing and Fabrication Advanced Materials-XVIII2009
- Author(s)
  K.Koujina, Y Todaka, T.Yakushiji, H.Nagai, Y.Iguchi, M.Umemoto
- Journal Title
  
  eds : M.Niinomi, M.Morinaga, M.Nakai, N.Bhatnagar, T.S.Srivatsan Vol.4
  
  Pages: 1925-1932
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Texture evolution in pure aluminum subjected to monotonic and reversal straining in high pressure torsion2009
- Author(s)
  D.Orlov, P.P.Bhattacharjee, Y Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Scripta Mater. Vol.60
  
  Pages: 893-896
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of nanocrystallization and twinning on hardness in Ni_3Al deformed by high-pressure torsion2009
- Author(s)
  O.Ciuca, K.Tsuchiya, Y.Yokoyama, Y.Todaka, M.Umemoto
- Journal Title
  
  Materials Transactions Vol.50
  
  Pages: 1123-1127
- NAID
  10024814976
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Structural refinement of Ni_3Al intermetallic compound by high-pressuretorsion2009
- Author(s)
  O.Ciuca, K.Tsuchiya, Y.Yokoyama, Y.Todaka, M.Umemoto
- Journal Title
  
  Processing and Fabrication Advanced Materials-XVIII(eds : M. Niinomi, M. Morinaga, M. Nakai, N. Bhatnagar, T. S. Srivatsan) Vol.4
  
  Pages: 1915-1924
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] High-functionalization of mechanical property in Ti and Zr by pressure-induced phase transformation under high-pressure torsion straining, Processing and Fabrication Advanced Materials-XVIII2009
- Author(s)
  Y Todaka, H.Azuma, Y.Ohnishi, M.Umemoto
- Journal Title
  
  eds : M.Niinomi, M.Morinaga, M.Nakai, N.Bhatnagar, T.S.Srivatsan Vol.4
  
  Pages: 1895-1904
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Role of strain reversal in grain refinement by severe plastic deformation2009
- Author(s)
  D.Orlov, Y.Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Materials Science Engineering A Vol.499
  
  Pages: 427-433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] 超強加工による炭素鋼中のセメンタイトの変形と分解2009
- Author(s)
  戸高義一, 梅本実, 大野哲史, 鈴木真由美, 川畑雄士, 土谷浩一
- Journal Title
  
  ふぇらむ 14(1)
  
  Pages: 28-28
- NAID
  10024024449
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of nanocrystallization and twinning on hardness in Ni3Al deformed by high-pressure torsion2009
- Author(s)
  O.Ciuca, K.Tsuchiya, Y.Yokoyama, Y Todaka, M.Umemoto
- Journal Title
  
  Materials Transactions Vol.50
  
  Pages: 1123-1127
- NAID
  130004454224
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Production of TiNi amorphous/nanocrystalline wires with high strength and elastic modulus by severe cold drawing2009
- Author(s)
  K.Tsuchiya, Y.Hada, T.Koyano, K.Nakajima, M.Ohnuma, T.Koike, Y.Todaka, M.Umemoto
- Journal Title
  
  Scripta Materialia Vol.60
  
  Pages: 749-752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Production of TiNi amorphous/nanocrystalline wires with high strength and elastic modulus by severe cold drawing2009
- Author(s)
  Koichi Tsuchiya, Yasufumi Hada, Tamotsu Koyano, Kiyomi Nakajima, Masahito Ohnuma, Tadahiro Koike, Yoshikazu Todaka, Minoru Umemoto
- Journal Title
  
  Scripta Materialia 60
  
  Pages: 749-752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] High-functionalization of mechanical property in Ti and Zr by pressure-induced phase transformation under high-pressure torsion straining2009
- Author(s)
  Y.Todaka, H.Azuma, Y.Ohnishi, M.Umemoto
- Journal Title
  
  Processing and Fabrication Advanced Materials-XVIII(eds : M. Niinomi, M. Morinaga, M. Nakai, N. Bhatnagar, T. S. Srivatsan) Vol.4
  
  Pages: 1895-1904
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Production of TiNi amorphous/nanocrystalline wires with high strength and elastic modulus by severe cold drawing2009
- Author(s)
  Koichi Tsuchiya, Yasufumi Hada, Tamotsu Koyano, Kiyomi Nakajima, Masahito Ohnuma, Tadahiro Koike, Yoshikazu Todaka, Minoru Umemoto
- Journal Title
  
  Scripta Mater. 60
  
  Pages: 749-752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] ショットピーニングにより鉄鋼材料表面に形成したナノ結晶粒組織2009
- Author(s)
  戸高義一, 梅本実, 渡辺幸則, 山崎歩見, 土谷浩一
- Journal Title
  
  ふぇらむ 14(1)
  
  Pages: 24-24
- NAID
  10024024433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of hydrogen on mechanical properties of submicrocrystalline ultra-low carbon steel produced by high-pressure torsion straining2009
- Author(s)
  K.Morisako, Y.Todaka, M.Kumagai, Y.Matsumoto, M.Umemoto
- Journal Title
  
  Processing and Fabrication Advanced Materials-XVIII(eds : M. Niinomi, M. Morinaga, M. Nakai, N. Bhatnagar, T. S. Srivatsan) Vol.4
  
  Pages: 1875-1884
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Role of strain reversal in grain refinement by severe plastic deformation2009
- Author(s)
  Dmitry Orlova, Yoshikazu Todaka, Minoru Umemoto, Nobuhiro Tsuji
- Journal Title
  
  Materials Science and Engineering : A 499
  
  Pages: 427-433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] ショットピーニングにより鉄鋼材料表面に形成したナノ結晶粒組織2009
- Author(s)
  戸高義一, 梅本実, 渡辺幸則, 山崎歩見, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14, No.1
  
  Pages: 24-24
- NAID
  10024024433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] HPT加工により作成したサブミクロン結晶粒IF 鋼の微細組織2009
- Author(s)
  戸高義一, 梅本実, 好井美樹, 熊谷匡明, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14, No.1
  
  Pages: 14-14
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Role of strain reversal in grain refinement by severe plastic deformation2009
- Author(s)
  D.Orlov, Y Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Materials Science Eng.A Vol.499
  
  Pages: 427-433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Role of strain reversal in grain refinement by severe plastic deformation2009
- Author(s)
  D.Orlov, Y.Todaka, M.Umemoto and N.Tsuji
- Journal Title
  
  Materials Science Engineering A Vol.499
  
  Pages: 427-433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062005
[Journal Article] ショットピーニングにより鉄鋼材料表面に形成したナノ結晶粒組織2009
- Author(s)
  戸高義一, 梅本実, 渡辺幸則, 山崎歩見, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14 No.1
  
  Pages: 24-24
- NAID
  10024024433
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Tensile and fatigue properties of sub-microcrystalline ultra-low carbon steel produced by HPT-straining2009
- Author(s)
  Y.Todaka, H.Nagai, Y.Takubo, M.Yoshii, M.Kumagai, M.Umemoto
- Journal Title
  
  International Journal of Materials Research Vol.100
  
  Pages: 775-779
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Fabrication of CuZr(Al) bulk metallic glasses by high pressure torsion2009
- Author(s)
  Y.F.Sun, T.Nakamura, Y.Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Intermetallics Vol.17
  
  Pages: 256-261
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Plastic flow and grain refinement under simple shear-based severe plastic deformation processing2009
- Author(s)
  D.Orlov, Y Todaka, M.Umemoto, Y.Beygelzimer, Z.Horita, N.Tsuji
- Journal Title
  
  Materials Science Forum Vols.604-605
  
  Pages: 171-178
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Formation of ultrafine-grained structure at worn surface in carbon steel by wearing process2009
- Author(s)
  K.Koujina, Y.Todaka, T.Yakushiji, H.Nagai, Y.Iguchi, M.Umemoto
- Journal Title
  
  Processing and Fabrication Advanced Materials-XVIII(eds : M. Niinomi, M. Morinaga, M. Nakai, N. Bhatnagar, T. S. Srivatsan) Vol.4
  
  Pages: 1925-1932
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Tensile and fatigue properties of sub-microcrystalline ultra-low carbon steel produced by HPT-straining2009
- Author(s)
  Y.Todaka, H.Nagai,Y.Takubo, M.Yoshii, M.Kumagai, M.Umemoto
- Journal Title
  
  International Journal of Materials Research Vol.100
  
  Pages: 775-779
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Texture evolution in pure aluminum subjected to monotonous and reversal straining in high-pressure torsion2009
- Author(s)
  Dmitry Orlov, Pinaki Prasad Bhattacharjee, Yoshikazu Todaka, Minoru Umemoto, Nobuhiro Tsuji
- Journal Title
  
  Scripta Materialia 60
  
  Pages: 893-896
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Nanocrystallization of β-titanium Alloys by High-pressure Torsion2009
- Author(s)
  S.Farjami, K.Tsuchiya, Y.Todaka, M.Umemoto
- Journal Title
  
  Processing and Fabrication Advanced Materials-XVIII(eds : M. Niinomi, M. Morinaga, M. Nakai, N. Bhatnagar, T. S. Srivatsan) Vol.3
  
  Pages: 1053-1060
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Fabrication of CuZr(Al) bulk metallic glasses by high pressure torsion2009
- Author(s)
  Y.F.Sun, T.Nakamura, Y Todaka, M.Umemoto, N.Tsuji
- Journal Title
  
  Intermetallics 17
  
  Pages: 256-261
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Decelopment of Shape Memory Actuators for Cryogenic Application2009
- Author(s)
  K. Tsuchiya, T. Koyano, T. Todaka and M. Umemoto
- Journal Title
  
  Proceedings of International Symposium on Next-Generattion Actuators Leading Breakthroughs
  
  Pages: 41-44
- Data Source
  KAKENHI-PROJECT-19016015
[Journal Article] 切削加工により鉄鋼材料表面に形成されたナノ結晶粒組織2009
- Author(s)
  戸高義一, 梅本実, 李金国, 川畑雄士, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14, No.1
  
  Pages: 26-26
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Production of TiNi amorphous/ nanocrystalline wires with high strength and elastic modulus by severe cold drawing2009
- Author(s)
  K.Tsuchiya, Y.Hada, T.Koyano, K.Nakajima, M.Ohnuma, T.Koike, Y.Todaka and M. Umemoto
- Journal Title
  
  Scripta Materialia Vol.60
  
  Pages: 749-752
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062005
[Journal Article] 超強加工による炭素鋼中のセメンタイトの変形と分解2009
- Author(s)
  戸高義一, 梅本実, 大野哲史, 鈴木真由美, 川畑雄士, 土谷浩一
- Journal Title
  
  ふぇらむ Vol.14, No.1
  
  Pages: 28-28
- NAID
  10024024449
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Severe pastic deformation of Zr-Cu-Al metallic glass in As-cast and crystallized conditions2009
- Author(s)
  K.Tsuchiya, S.Yamamoto, Y.Yokoyama, H.Kato, Y.Todaka, M.Umemoto
- Journal Title
  
  Processing and Fabrication Advanced Materials-XVIII(eds : M. Niinomi, M. Morinaga, M. Nakai, N. Bhatnagar, T. S. Srivatsan) Vol.4
  
  Pages: 1865-1874
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation.2008
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, A.Yamazaki, W.Chaohui and K.Tsuchiya
- Journal Title
  
  Materials Transactions 49,1
  
  Pages: 7-14
- NAID
  10027021203
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation.2008
- Author(s)
  Y. Todaka, M. Umemoto, Y. Watanabe, A. Yamazaki, W. Chaohui and K. Tsuchiya
- Journal Title
  
  Materials Transactions 49,1
  
  Pages: 7-14
- NAID
  10027021203
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] THE DYNAMIC PHASE TRANSFORMATION AND FORMATION OF NANOCRYSTALLINE STRUCTURE IN SUS304 AUSTENITIC STAINLESS STEEL SUBJECTED TO HIGH PRESSURETORSION2008
- Author(s)
  J. G. Li, M. Umemoto, Y. Todaka, K. Fujisaku, K. Tsuchiya
- Journal Title
  
  Rev. Adv. Mater. Sci. 18
  
  Pages: 577-582
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Strain Gradient Hardening and Pressure induced Phase Transformation of Metals by HPT2008
- Author(s)
  M. Umemoto, Y. Todaka, J. Sasaki, I. Shuro
- Journal Title
  
  Materials Science Forum 584-586
  
  Pages: 493-500
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Crystalline-to-amorphous transformation in intermetallic compounds by severe plastic deformation2008
- Author(s)
  土谷浩一, T.Waitz, T.Hara, H.P.Karnthaler, Y.Todaka, M.Umemoto
- Journal Title
  
  Proceedings, EMC2008 Materials Science 2
  
  Pages: 385-386
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] 鉄鋼材料の表層超強加工による組織と特性変化2008
- Author(s)
  梅本実, 戸高義一、Li Jinguo
- Journal Title
  
  鉄と鋼(Tetsu-to-Hagane) 94(12)
  
  Pages: 616-628
- NAID
  110006990126
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation2008
- Author(s)
  Y. Todaka, M. Umemoto, Y. Watanabe, A. Yamazaki, W. Chaohui, K. Tsuchiya
- Journal Title
  
  Materials Transactions 49, 1
  
  Pages: 7-14
- NAID
  10027021203
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] THE DYNAMIC PHASE TRANSFORMATION AND FORMATION OF NANOCRYSTALLINE STRUCTURE IN SUS304 AUSTENITIC STAINLESS STEEL SUBJECTED TO HIGH PRESSURE TORSION2008
- Author(s)
  J.G.Li, M.Umemoto, Y Todaka, K.Fujisaku, K.Tsuchiya
- Journal Title
  
  Rev.Adv.Mater.Sci. 18
  
  Pages: 577-582
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium, Mater.2008
- Author(s)
  Y Todaka, M.Umemoto, A.Yamazaki, J.Sasaki, K.Tsuchiya
- Journal Title
  
  Transactions 49(1)
  
  Pages: 47-53
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] 鉄鋼材料の表層超強加工による組織と特性感化2008
- Author(s)
  梅本実, 戸高義一, Li Jinguo
- Journal Title
  
  鉄と鋼(Tetsu-to-Hagane) 94, (12)
  
  Pages: 616-628
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium2008
- Author(s)
  Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki, K. Tsuchiya
- Journal Title
  
  Materials Transactions 49,1
  
  Pages: 47-53
- NAID
  10020088443
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Influence of high-pressure torsion straining conditions on microstructure evolution in commercial purity aluminum2008
- Author(s)
  Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki, K. Tsuchiya
- Journal Title
  
  Materials Transactions 49, (1)
  
  Pages: 47-14
- NAID
  10020088312
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium,2008
- Author(s)
  Y.Todaka, M.Umemoto, A.Yamazaki, J.Sasaki and K.Tsuchiya
- Journal Title
  
  Materials Transactions 49,1
  
  Pages: 47-53
- NAID
  10020088443
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Tensile Property of Submicrocrystalline Pure Fe Produced by HPT-straining2008
- Author(s)
  Yoshikazu Todaka, Yoshii Miki, Minoru Umemoto, Chaohui Wang, Koichi Tsuchiya
- Journal Title
  
  Materials Science Forum 584-586
  
  Pages: 597-6028
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of high-pressure torsion straining conditions on microstructure evolution in commercial purity aluminum, Mater.2008
- Author(s)
  Y Todaka, M.Umemoto, A.Yamazaki, J.Sasaki, K.Tsuchiya
- Journal Title
  
  Transactions 49(1)
  
  Pages: 47-14
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Crystalline-to-amorphous transformation in intermetallic compounds by severe plastic deformation2008
- Author(s)
  K. Tsuchiya, T. Waitz, T. Hara, H. P. Karnthaler, Y. Todaka, M. Umemoto
- Journal Title
  
  Proceedings, EMC2008 Materials Science 2
  
  Pages: 385-386
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of high-pressure torsion straining conditions on microstructure evolution in commercial purity aluminum2008
- Author(s)
  Y.Todaka, M.Umemoto, A. Yamazaki, J. Sasaki and K. Tsuchiya
- Journal Title
  
  Materials Transactions Vol.49
  
  Pages: 7-14
- NAID
  10020088312
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062005
[Journal Article] Reversal straining to manage structure in pure aluminum under SPD2008
- Author(s)
  Dmitry Orlov, Pinaki Prasad Bhattacharjee, Yoshikazu Todaka, Minoru Umemoto, Nobuhiro Tsuji
- Journal Title
  
  Materials Science Forum 584-586
  
  Pages: 133-138
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium,2008
- Author(s)
  Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki and K. Tsuchiya
- Journal Title
  
  Materials Transactions 49,1
  
  Pages: 47-53
- NAID
  10020088443
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Strain Gradient Hardening and Pressure induced Phase Transformation of Metals by HPT2008
- Author(s)
  M.Umemoto, Y Todaka, J.Sasaki, I.Shuro
- Journal Title
  
  Materials Science Forum 584-586
  
  Pages: 493-500
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Bulk submicrocrystalline x-Ti produced by high-pressure torsion straining2008
- Author(s)
  Yoshikazu Todaka, Jun Sasaki, Takayuki Moto, Minoru Umemoto
- Journal Title
  
  Scripta Materialia 59
  
  Pages: 615-618
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Synthesis and Characterization of In-situ Copper-Niobium Carbide Composite2008
- Author(s)
  H. Zuhailawati, R. Othman, D. L. Bui, M. Umemoto
- Journal Title
  
  AIP Conf. Proc. 989
  
  Pages: 241-244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Effect of strain path in high-pressure torsion process on hardening in commercial purity titanium2008
- Author(s)
  Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki, K. Tsuchiya
- Journal Title
  
  Materials Transactions 49, (1)
  
  Pages: 47-53
- NAID
  10020088443
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Synthesis and Characterization of In-situ Copper-Niobium Carbide Composite2008
- Author(s)
  H.Zuhailawati, R.Othman, D.L.Bui, M.Umemoto
- Journal Title
  
  AIP Conf.Proc. 989
  
  Pages: 241-244
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20246103
[Journal Article] Influence of heat generation during HPT-straining on strengthening and grain refinement in commercial purity Ti.2007
- Author(s)
  Y.Todaka, M.Umemoto, A.Yamazaki, J.Sasaki and K.Tsuchiya
- Journal Title
  
  Proceedings of the llth Wbrld Conference on Titanium(JIMICS), The Japan Institute of Metals
  
  Pages: 207-210
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient on grain refinement by severe plastic deformation2007
- Author(s)
  Y., Todaka・M., Umemoto, et. al.
- Journal Title
  
  Materials Science and Engineering A 462
  
  Pages: 264-268
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062005
[Journal Article] Properties of amorphous/nanocrystalline TiNi shape memory alloys produced by plastic deformation.2007
- Author(s)
  K.Tsuchiya, M.Katahira, A.Hosokawa, Y.Todaka and M.Umemoto
- Journal Title
  
  Proceedings of the llth World Conference on Titanium(JIMIC5), The Japan Institute of Metals
  
  Pages: 483-486
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient on grain refinement by severe plastic deformation.2007
- Author(s)
  Yoshikazu Todaka, Minoru Umemoto, Jun Yin, Zhiguang Liu and Koichi Tsuchiya.
- Journal Title
  
  Materials Science and Engineering: A 462, 1-2, 25
  
  Pages: 264-268
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient and dynamic transformation on the formation of nanocrystalline structure produced by severe plastic deformation.2007
- Author(s)
  M.Umemoto, Y.Todaka, J.Li and K.Tsuchiya
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 2787-2792
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Properties of amorphous/nanocrystalline TiNi shape memory alloys produced by plastic deformation2007
- Author(s)
  K. Tsuchiya, M. Katahira, A. Hosokawa, Y. Todaka, M. Umemoto
- Journal Title
  
  Proceedings of the 11th World Conference on Titanium(JIMIC5), The Japan Institute of Metalr
  
  Pages: 483-486
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient and dynamic transformation on the formation of nanocrystalline structure produced by severe plastic deformation2007
- Author(s)
  M. Umemoto, Y. Todaka, J. Li, K. Tsuchiya
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 2787-2792
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Influence of heat generation during HPT-straining on strengthening and grain refinement in commercial purity Ti.2007
- Author(s)
  Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki and K. Tsuchiya
- Journal Title
  
  Proceedings of the 11th World Conference on Titanium(JIMIC5), The Japan Institute of Metals
  
  Pages: 207-210
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of nanocrystalline structure in steels by severe plastic deformation.2007
- Author(s)
  Y.Todaka, M.Umemoto, C.Wang, K.Tsuchiya
- Journal Title
  
  General Abstract : Electronic, and Photonic Materials Division, TMS (The Minerals, Metals ＆ Materials Society), eds : L. Qing and S. Kang
  
  Pages: 87-93
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Role of strain gradient and dynamic transformation on the formation of nanocrystalline structure produced by severe plastic deformation.2007
- Author(s)
  M.Umemoto, Y.Todaka, J.Li, K.Tsuchiya
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 2787-2792
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Influence of heat generation during HPT-straining on strengthening and grain refinement in commercial purity Ti2007
- Author(s)
  Y. Todaka, M. Umemoto, A. Yamazaki, J. Sasaki, K. Tsuchiya
- Journal Title
  
  Proceedings of the 11th World Conference on Titanium(JIMIC5), The Japan Institute of Metals
  
  Pages: 207-210
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation2007
- Author(s)
  Y. Todaka, M. Umemoto, Y. Watanabe, A. Yamazaki, C. Wang and K. Tsuchiya
- Journal Title
  
  ISIJ International Vol.47
  
  Pages: 157-162
- NAID
  10027021203
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18062005
[Journal Article] Dissolution of cementite in carbon steels by ball drop deformation and laser heating.2007
- Author(s)
  Yoshikazu Todaka, Minoru Umemoto, Akifumi Ohno, Mayumi Suzuki, Yuji Kawabata, Koichi Tsuchiya.
- Journal Title
  
  Journal of Alloys and Compounds 434-435
  
  Pages: 497-500
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient on grain refinement by severe plastic deformation2007
- Author(s)
  Yoshikazu, Todaka, Minoru, Umemoto, Jun, Yin, Zhiguang, Liu, Koichi, Tsuchiya
- Journal Title
  
  Materials Science and Engineering 462,1-2,25
  
  Pages: 264-268
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of nanocrystalline structure in steels by severe plastic deformation.2007
- Author(s)
  Y.Todaka, M.Umemoto, C.Wang, K.Tsuchiya
- Journal Title
  
  General Abstract : Electronic, and Photonic Materials Division, TMS (The Minerals, Metals ＆ Materials Society) (eds : L. Qing and S. Kang.)
  
  Pages: 87-93
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Role of straingradient on grain refinement by severe plastic deformation.2007
- Author(s)
  Yoshikazu Todaka, Minoru Umemoto, Jun Yin, Zhiguang Liu and Koichi Tsuchiya.
- Journal Title
  
  Materials Science and Engineering:A 462,1-2,25
  
  Pages: 264-268
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of ultrafin grained structure in SUS 304 stainless steel produced by high pressure torsion (HPT)2007
- Author(s)
  J G.Li, M. Umemoto, Y. Todaka, K. Tsuchiya
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 847-852
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation2007
- Author(s)
  Y. Todaka, M. Umemoto, Y. Watanabe, A. Yamazaki, W. Chaohui, K. Tsuchiys
- Journal Title
  
  ISIJ International 47, 1
  
  Pages: 157-162
- NAID
  10027021203
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation.2007
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, A.Yamazaki, W.Chaohui and K.Tsuchiya
- Journal Title
  
  ISIJ International 47,1
  
  Pages: 157-162
- NAID
  10027021203
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient on the formation of nanocrystalline structure produced by severe plastic deformation2007
- Author(s)
  J G. Li, M. Umemoto, Y. Todaka, K. Tsuchiya
- Journal Title
  
  Journal of Alloys and Compounds 434-435
  
  Pages: 290-293
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation.2007
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, A.Yamazaki, C.Wang, K.Tsuchiya
- Journal Title
  
  ISIJ International 47
  
  Pages: 157-162
- NAID
  10027021203
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Formation of nanocrystalline structure in steels by severe plastic defbr mation.2007
- Author(s)
  Y.Todaka, M.Umemoto, C.Wang and K.Tsuchiya
- Journal Title
  
  General Abstract: Electronic, and Photonic Materials Division, TMS(TheMinerals, Metals & Materials Society)
  
  Pages: 87-93
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient and dynamic transformation on the formation of nanocrystalline structure produced by severe plastic deformation.2007
- Author(s)
  M. Umemoto, Y. Todaka, J. Li and K. Tsuchiya
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 2787-2792
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Nanostructured Shape Memory Alloys for Biomedical Applications.2007
- Author(s)
  K. Tsuchiya, Q. Cao, A. Hosokawa, M. Katahira, Y. Todaka and M. Umemoto
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 505-510
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] The microstructure investigation on the surface of drilled hole in carbon steels.2007
- Author(s)
  J.G.Li, M.Umemoto, Y.Todaka, K.Tsuchiya
- Journal Title
  
  Acta Materialia 55
  
  Pages: 1397-1406
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Dissolution of cementite in carbon steels by ball drop deformation and laser heating2007
- Author(s)
  Yoshikazu, Todaka, Minoru, Umemoto, Akifumi, Ohno, Mayumi, Suzuki, Yuji, Kawabata, Koichi, Tsuchiya
- Journal Title
  
  Journal of Alloys and Compounds 434-435
  
  Pages: 497-500
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of ultrafin grained structure in SUS 304 stainless steel produced by high pressure torsion(HPT).2007
- Author(s)
  J.G.Li, M.Umemoto, Y.Todaka and K.Tsuchiya
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 847-852
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] A microstructural investigation of the surface of a drilled hole in carbon steels2007
- Author(s)
  J G. Li, M. Umemoto, Y. Todaka, K. Tsuchiya
- Journal Title
  
  Acta Materiaria 55
  
  Pages: 1397-1406
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Nanostructured Shape Memory Alloys for Biomedical Applications2007
- Author(s)
  K. Tsuchiya, Q. Cao, A. Hosokawa, M. Katahira, Y. Todaka, M. Umemoto
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 505-510
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Nanostructured Shape Memory Alloys for Biomedical Applications.2007
- Author(s)
  K.Tsuchiya, Q.Cao, A.Hosokawa, M.Katahira, Y.Todaka and M.Umemoto
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 505-510
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient on the formation of nanocrystalline structure produced by severe plastic deformation.2007
- Author(s)
  J.G.Li, M.Umemoto, Y.Todaka, K.Tsuchiya.
- Journal Title
  
  Journal of Alloys and Compounds 434-435
  
  Pages: 290-293
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] A microstructural investigation of the surface of a drilled hole in carbon steels.2007
- Author(s)
  J.G.Li, M.Umemoto, Y.Todaka, K.Tsuchiya.
- Journal Title
  
  Acta Materiaria 55
  
  Pages: 1397-1406
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Properties of amorphous/nanocrystalline TiNi shape memory alloys produced by plastic deformation.2007
- Author(s)
  K. Tsuchiya, M. Katahira, A. Hosokawa, Y. Todaka and M. Umemoto
- Journal Title
  
  Proceedings of the 11th World Conference on Titanium(JIMIC5), The Japan Institute of Metals
  
  Pages: 483-486
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Dissolution of cementite in carbon steels by ball drop deformation and l aser heating.2007
- Author(s)
  Yoshikazu Todaka, Minoru Umemoto, Akifumi Ohno, Mayumi Suzuki, Yuji Kawabata, Koichi Tsuchiya.
- Journal Title
  
  Joumal of Alloys and Compounds 434-435
  
  Pages: 497-500
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of nanocrystalline structure in steels by severe plastic deformation.2007
- Author(s)
  Y. Todaka, M. Umemoto, C. Wang and K. Tsuchiya
- Journal Title
  
  General Abstract: Electronic, and Photonic Materials Division, TMS(The Minerals, Metals & Materials Society)
  
  Pages: 87-93
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of nanocrystalline structure in steels by severe plastic deformation2007
- Author(s)
  Y. Todaka, M. Umemoto, C. Wang, K. Tsuchiya
- Journal Title
  
  General Abstract : Electronic, and Photonic Materials Division, TMS (The Minerals, Metals & Materials Society)
  
  Pages: 87-93
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of ultrafin grained structure in SUS 304 stainless steel produced by high pressure torsion(HPT).2007
- Author(s)
  J. G. Li, M. Umemoto, Y. Todaka and K. Tsuchiya
- Journal Title
  
  Materials Science Forum 561-565
  
  Pages: 847-852
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] A microstructural investigation of the surface of a drilled hole in carbon steels.2007
- Author(s)
  J. G. Li M. Umemoto, Y. Todaka, K. Tsuchiya.
- Journal Title
  
  Acta Materiaria 55
  
  Pages: 1397-1406
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Role of strain gradient on the formation of nanocrystalline structure produced by severe plastic deformation.2007
- Author(s)
  J.Li, M.Umemoto, Y.Todaka, K.Tsuchiya
- Journal Title
  
  Journal of alloys and compounds 434-435
  
  Pages: 290-293
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation.2007
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, A.Yamazaki, C.Wang, K.Tsuchiya
- Journal Title
  
  ISIJ International 47
  
  Pages: 157-162
- NAID
  10027021203
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Nanostructured Shape Memory Alloys for Biomedical Applications.2007
- Author(s)
  K.Tsuchiya, Q.Cao, A.Hosokawa, M.Katahira, Y.Todaka, M.Umemoto
- Journal Title
  
  Materials Science Forum 539-543
  
  Pages: 505-510
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Role of strain gradient on the formation of nanocrystalline structure produced by severe plastic deformation.2007
- Author(s)
  J. G. Li M. Umemoto, Y. Todaka, K. Tsuchiya.
- Journal Title
  
  Journal of Alloys and Compounds 434-435
  
  Pages: 290-293
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of surface nanocrystalline structure in steels by shot peening and role of strain gradient on grain refinement by deformation.2007
- Author(s)
  Y. Todaka, M. Umemoto, Y. Watanabe, A. Yamazaki, W. Chaohui and K. Tsuchiya
- Journal Title
  
  ISIJ International 47,1
  
  Pages: 157-162
- NAID
  10027021203
- Description
  「研究成果報告書概要(和文)」より
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of nanocrystalline structure in steels by severe plastic deformation.2007
- Author(s)
  Y.Todaka, M.Umemoto, C.Wang, K.Tsuchiya
- Journal Title
  
  General Abstract : Electronic, and Photonic Materials Division, TMS (The Minerals, Metals ＆ Materials Society), eds : L. Qing and S. Kang.
  
  Pages: 87-93
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Formation of nanocrystalline structure by shot peening.2006
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, K.Tsuchiya
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 669-674
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] TiNi系形状記憶合金の表層非晶質化/ナノ結晶化に与えるショットピーニング条件の影響2006
- Author(s)
  曹奇峰, 土谷浩一, 原田泰典, Dacian Tomus, 森井浩一, 戸高義一, 梅本実
- Journal Title
  
  日本金属学会誌 (掲載予定)
- NAID
  10018161187
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] Nanocrystalline structure in steels produced by various severe plastic deformation processes.2006
- Author(s)
  M.Umemoto, Y.Todaka, J.Li, K.Tsuchiya
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 11-18
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] TiNi系形状記憶合金の表層非晶質化/ナノ結晶化に与えるショットピーニング条件の影響2006
- Author(s)
  曹奇峰, 土谷浩一, 原田泰典, Dacian Tomus, 森井浩一, 戸高義一, 梅本実
- Journal Title
  
  日本金属学会誌 (掲載予定)
- NAID
  10018161187
- Data Source
  KAKENHI-PROJECT-17360312
[Journal Article] TiNi系形状記憶合金の表層非晶質化/ナノ結晶化に与えるショットピーニング条件の影響.2006
- Author(s)
  曹奇峰, 土谷浩一, 原田巻典, D.Tomus, 森井浩一, 戸高義一, 梅本実
- Journal Title
  
  日本金属学会誌 70
  
  Pages: 473-477
- NAID
  10018161187
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Formation of nanocrystalline structure by shot peening.2006
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, K.Tsuchiya
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 669-674
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] TiNi系形状記憶合金の表層非晶質化/ナン結晶化に与えるショットピーニング条件の影響.2006
- Author(s)
  曹奇峰, 土谷浩一, 原田泰典, D.Tomus, 森井浩一, 戸高義一, 梅本実
- Journal Title
  
  日本金属学会誌 70
  
  Pages: 473-477
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Nanocrystalline structure in steels produced by various severe plastic deformation processes.2006
- Author(s)
  M.Umemoto, Y.Todaka, J.Li, K.Tsuchiya
- Journal Title
  
  Materials Science Forum 503-504
  
  Pages: 11-18
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Martensitic Transformation and Mechanical Behavior of TiNi Shape Memory Alloys after Severe Plastic Deformation2006
- Author(s)
  K.Tsuchiya, M.Inuzuka, A.Hosokawa, D.Tomus, H.Nakayama, K.Morii, Y.Todaka, M.Umemoto
- Journal Title
  
  Mater.Sci.Forum. 503-504
  
  Pages: 419-424
- Data Source
  KAKENHI-PROJECT-17360312
[Journal Article] Nanocrystalline structure formation in carbon steel introduced by high speed drilling.2006
- Author(s)
  J.G.Li, M.Umemoto, Y.Todaka, K.Tsuchiya
- Journal Title
  
  Materials Science and Engineering A 435-436
  
  Pages: 383-388
- Data Source
  KAKENHI-PROJECT-18360329
[Journal Article] Comparison of nanocrystallization in steels by ball milling, shot peening and drilling.2005
- Author(s)
  M.Umemoto, Y.Todaka, Y.Watanabe, J.Li, K.Tsuchiya
- Journal Title
  
  Journal of Metastable and Nanocrystalline Materials 24-25
  
  Pages: 571-576
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Nanocrystallization of carbon steels by shot peening and drilling.2005
- Author(s)
  Y.Todaka, M.Umemoto, J.Li, K.Tsuchiya
- Journal Title
  
  Reviews on Advanced Materials Science 10
  
  Pages: 409-416
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Deformation and dissolution of cementite by severe plastic deformation.2005
- Author(s)
  M.Umemoto, Y.Todaka, A.Ohno, M.Suzuki, K.Tsuchiya
- Journal Title
  
  Journal of Metastable and Nanocrystalline Materials 24-25
  
  Pages: 157-160
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Surface Amorphization of TiNi Shape Memory Alloy by Shot Peening2005
- Author(s)
  K.Tsuchiya, H.Nakayama, Y.Todaka, M.Umemoto, K.Morii
- Journal Title
  
  J.Metastable and Nanocrystalline Solids 24-25
  
  Pages: 615-618
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] Surface Amorphization of TiNi Shape Memory Alloy by Shot Peening2005
- Author(s)
  K.Tsuchiya, H.Nakayama, Y.Todaka, M.Umemoto, K.Morii
- Journal Title
  
  J.Metastable and Nanocrystalline Solids 24-25
  
  Pages: 615-618
- Data Source
  KAKENHI-PROJECT-17360312
[Journal Article] Martensitic Transformation and Mechanical Behavior of TiNi Shape Memory Alloys after Severe Plastic Deformation2005
- Author(s)
  K.Tsuchiya, M.Inuzuka, A.Hosokawa, D.Tomus, H.Nakayama, K.Morii, Y.Todaka, M.Umemoto
- Journal Title
  
  Mater.Sci.Forum 503-504
  
  Pages: 419-424
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] Surface amorphization of TiNi shape memory alloy by shot peening.2005
- Author(s)
  K.Tsuchiya, H.Nakayama, Y.Todaka, M.Umemoto, K.Morii
- Journal Title
  
  Journal of Metastable and Nanocrystalline Materials 24-25
  
  Pages: 615-618
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Nanocrystallization of martensite steels and Ti-6Al-4V alloy by shot peening.2005
- Author(s)
  Y.Todaka, M.Umemoto, Y.Watanabe, K.Tsuchiya
- Journal Title
  
  Journal of Metastable and Nanocrystalline Materials 24-25
  
  Pages: 471-474
- Data Source
  KAKENHI-PROJECT-17560616
[Journal Article] Surface Amorphization in Intermetallic Compounds by Shot Peening2004
- Author(s)
  H.Nakayama, K.Tsuchiya, Y.Todaka, M.Umemoto, K.Morii, T.Shimizu
- Journal Title
  
  Mater.Sci.Forum 449-452
  
  Pages: 197-200
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] Modification of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy by Addition of Rare Earth Elements2004
- Author(s)
  K.Tsuchiya, A.Tsutsumi, H.Ohtsuka, M.Umemoto
- Journal Title
  
  Mater.Sci.Eng., A 378
  
  Pages: 370-376
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] Correlation between Twins and Magnetic Domains in Martensitic Phase in Ferromgnetic Shape Memory Alloy2004
- Author(s)
  K.Tsuchiya, K.Yamaoto, T.Hirayama, M.Umemoto
- Journal Title
  
  Materia Japan 43
  
  Pages: 999-999
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] Modification of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy by Addition of Rare Earth Elements2004
- Author(s)
  K.Tsuchiya, A.Tsutsumi, H.Ohtsuka, M.Umemoto
- Journal Title
  
  Mater.Sci.Eng. A378
  
  Pages: 370-376
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] 強磁性形状記憶合金マルテンサイト相における双晶と磁区構造の関係2004
- Author(s)
  土谷浩一, 山本和生, 平山司, 梅本実
- Journal Title
  
  まてりあ 43
  
  Pages: 999-999
- NAID
  10014238933
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] Effect of Heat Treatments on Microstructures and Shape Memory Effect in TiNi Foils Produced from Ultrafine Laminates2004
- Author(s)
  D.Tomus, K.Tsuchiya, T.Nagano, A.Hosokawa, M.Umemoto
- Journal Title
  
  Transaction of the Materials Research Society of Japan 29(7)(to be published in)
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] Property of TiNi Shape Memory Foils Produced by Ultrafine Laminates Method2004
- Author(s)
  K.Tsuchiya, D.Tomus, M.Umemoto, M.Sasaki
- Journal Title
  
  Mater.Sci.Forum 449-452
  
  Pages: 1321-1324
- NAID
  10013507844
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] Influence of Heat Treatment on Phase Transformation of Ni-rich TiNi Foils Produced via Ultrafine Laminates2004
- Author(s)
  D.Tomus, K.Tsuchiya, T.Nagano, A.Hosokawa, T.Ohmori, M.Sasaki, Y.Todaka, M.Umemoto
- Journal Title
  
  Mater.Trans. 45
  
  Pages: 219-224
- NAID
  10012642942
- Data Source
  KAKENHI-PROJECT-16039209
[Journal Article] TEM Observation of Phase Transformation and Magnetic structure in Ferromagnetic Shape Memory Alloys2003
- Author(s)
  K.Tsuchiya, K.Yamamoto, T.Hirayama, H.Nakayama, Y.Todaka, M.Umemoto
- Journal Title
  
  Electron Microscopy : Its role in Materials Science(eds : J.R.Weertman, M.Fine, K.Favor, W.King and P.Liaw)(TMS)
  
  Pages: 305-312
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] Effect of Co and Ni on Martensitic Transformation and Magnetic Properties in Fe-Pd Ferromagnetic Shape Memory Alloys2003
- Author(s)
  K.Tsuchiya, T.Nojiri, H.Ohtsuka, M.Umemoto
- Journal Title
  
  Mater.Trans. 44
  
  Pages: 2499-2502
- NAID
  10011817575
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] TEM Observation of Phase Transformation and Magnetic structure in Ferromagnetic Shape Memory Alloys2003
- Author(s)
  K.Tsuchiya, K.Yamamoto, T.Hirayama, H.Nakayama, Y.Todaka, M.Umemoto
- Journal Title
  
  Electron Microscopy : Its role in Materials Science (eds : J.R.Weertman, M.Fine, K.Favor, W.King and P.Liaw)(TMS)
  
  Pages: 305-312
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] Effect of Rare-Earth Elements Addition on Properties of Ni-Mn-Ga Ferromagnetic Shape Memory Alloys2003
- Author(s)
  K.Tsuchiya, A.Tsutsumi, N.Ina, M.Umemoto, H.Ohtsuka
- Journal Title
  
  Trans.Mater.Res.Soc.Japan 28
  
  Pages: 269-270
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Journal Article] TEM Observation of Phase Transformation and Magnetic structure in Ferromagnetic Shape Memory Alloys2003
- Author(s)
  K.Tsuchiya, K.Yamamoto, T.Hirayama, H.Nakayama, Y.Todaka, M.Umemoto
- Journal Title
  
  Electron Microscopy : Its role in Materials Science (eds : J.R.Weertman, M.Fine, K.Favor, W.King and P.Liaw) (TMS)
  
  Pages: 305-312
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Patent] 希土類添加形状記憶合金2003
- Inventor(s)
  土谷浩一, 堤章徳, 梅本実, 松本栄
- Industrial Property Rights Holder
  NSKステアリングシステムズ(株), 土谷浩一
- Industrial Property Number
  2003-086264
- Filing Date
  2003-03-26
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-15560605
[Presentation] その場中性子同折法によるｻﾌﾞﾐｸﾛﾝ結晶粒極低炭素鋼の引張変形挙動解析2014
- Author(s)
  大槻匠, 戸高義一, 冨永尚吾, 東利樹, 梅本実, 諸岡聡
- Organizer
  日本鉄鋼協会第167回秋季講演大会学生ﾎﾟｽﾀｰｾｯｼｮﾝ
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] ｻﾌﾞﾐｸﾛﾝ結晶粒極低炭素鋼におけるﾎﾞｲﾄﾞの形成・連結に及ぼす水素の影響2014
- Author(s)
  佐藤宏和, 大塚晃生, 冨永尚吾, 戸高義一, 梅本実
- Organizer
  日本鉄鋼協会第167回秋季講演大会学生ﾎﾟｽﾀｰｾｯｼｮﾝ
- Place of Presentation
  東京工業大学
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] Phase transformations in SUS304 deformed by HPT2012
- Author(s)
  I. Shuro, H. H. Kuo, Y. Tbdaka, T. Sasakb, K. Hono, M. Umemoto
- Organizer
  The 3rd International Symposium on Steel Science(ISSS 2012)
- Place of Presentation
  Kyoto, Japan
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] Work-softening, high pressure phase formation and powder consolidation by HPT2011
- Author(s)
  I.Shuro, H.C.Wang, M.Umemoto H.H.Kuo, Y.Todaka
- Organizer
  The 1st International Conference on Materials Engineering (ICME) & The 3rd AUN/SEED-Net Regional Conference on Materials Engineering (RCM)
- Place of Presentation
  ジョグジャカルタ(インドネシア)
- Year and Date
  2011-02-02
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] EBSD Investigations of Ni3Al Structures Deformed by High・Pressure Torsion2010
- Author(s)
  CIUCA Octav Pau, 土谷浩一戸高義一, 梅本実, 横山嘉彦
- Organizer
  日本金属学会2010年秋期(第147回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-25
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Phase Transformation and Annealing Behavior of SUS 304 Austenitic Steel Deformed by High Pressure Torsion2010
- Author(s)
  Innocent Shuro, Minoru Umemoto, Yoshikazu Todaka
- Organizer
  The 7th Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  オーストラリア・ケアンズ
- Year and Date
  2010-08-03
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Strain induced transformation and annealing behavior of SUS304 stainless steel processed by HPT2010
- Author(s)
  M.Umemoto, I.Shuro, H.C.Wang, Y.Todaka, H.H.Kuo
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
- Place of Presentation
  福岡・日本
- Year and Date
  2010-11-21
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Phase transformation and annealing behavior of austenitic stainless steels deformed by high pressure torsion2010
- Author(s)
  Innocent Shuro, M.Umemoto, Y.Todaku
- Organizer
  日本金属学会2010年秋期(第147回)日本鉄鋼協会2010年秋季講演大会(第160回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPT加工したCu添加鋼の力学特性2010
- Author(s)
  戸高義一, 梅本実, 橋本元仙, 熊谷匡明, 森迫和宣
- Organizer
  日本鉄鋼協会2010年春季講演大会(第159回)
- Place of Presentation
  筑波大学筑波キャンパス
- Year and Date
  2010-03-30
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 強ひずみ加工により形成した純Tiにおけるω相のω→α変態挙動2010
- Author(s)
  入江建州, 戸高義一, 梅本実, 大西由城, 東宏昭, 足立望
- Organizer
  日本金属学会2010年春期(第146回)
- Place of Presentation
  筑波大学筑波キャンパス
- Year and Date
  2010-03-29
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Grain refinement and phase transformation in metals by high pressure torsion2010
- Author(s)
  M.Umemoto
- Organizer
  Symposium in Memory of Professor Toshio Mura
- Place of Presentation
  エバンストン・アメリカ
- Year and Date
  2010-05-25
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Effect of pre- and post-deformation aging on the microstructure and properties of Ti-Mo alloys subjected to high-pressure torsion2010
- Author(s)
  S.Farjami, K.Tsuchiya, S.Emura, X.H.Min, Y.Todaka, M.Umemoto
- Organizer
  日本金属学会2010年秋期(第147回)日本鉄鋼協会2010年秋季講演大会(第160回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 純TiにおけるHPT加工により形成するω相と逆変態後のα相との結晶方位関係2010
- Author(s)
  戸高義一, 東宏昭, 足立望, 入江建州, 梅本実
- Organizer
  日本鉄鋼協会2010年秋季講演大会(第160回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-27
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Bui Duc Long,Work-Softening, High Pressure Phase Formation and Powder Consolidation by HPT2010
- Author(s)
  Minoru Umemoto, Yoshikazu Todaka, Koichi Tsuchiya
- Organizer
  The 7th Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  オーストラリア・ケアンズ(H22年度他22件)
- Year and Date
  2010-08-02
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] A comparative study of the annealing behavior of HPTed austenitic stainless steels2010
- Author(s)
  I.Shuro, H.C.Wang, M.Umemoto, H.H.Kuo, Y.Todaka
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
- Place of Presentation
  福岡・日本
- Year and Date
  2010-11-21
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Nb・Zr異種金属対のHPT加工に伴う非平衡相の形成2010
- Author(s)
  宮崎達也, 寺田大将, 辻伸泰, 村尾玲子横山嘉彦, 杉山和正, 戸高義一, 梅本実
- Organizer
  日本金属学会2010年秋期(第147回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 純ZrのHPT加工によるω相の安定化と力学特性変化2010
- Author(s)
  足立望, 戸高義一, 梅本実, 東宏昭
- Organizer
  日本金属学会2010年春期(第146回)
- Place of Presentation
  筑波大学筑波キャンパス
- Year and Date
  2010-03-28
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Hydrogen embrittlement behavior of bulk nanostructured pure Fe produced by high-pressure torsion straining2010
- Author(s)
  Y.Todaka, K.Morisako, Y.Matsumoto, R.Ueji, Y.Nagaki, M.Umemoto
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM2010)
- Place of Presentation
  福岡・日本
- Year and Date
  2010-11-21
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Transformation and annealing behavior of SUS 304 austenitic steel deformed by High Pressure Torsion2010
- Author(s)
  INNOCENT Shuro, Minoru Umemoto
- Organizer
  日本金属学会2010年春期(第146回)
- Place of Presentation
  筑波大学筑波キャンパス
- Year and Date
  2010-03-29
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Effect of Grain Refinement on the Mechanical Properties of Ni3Al Deformed by High-pressure Torsion2010
- Author(s)
  CIUCA Octav Paul, 土谷浩一, 戸高義一, 梅本実, 横山嘉彦
- Organizer
  日本金属学会2010年春期(第146回)
- Place of Presentation
  筑波大学筑波キャンパス
- Year and Date
  2010-03-28
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Fabrication of High Strength and High Strength and High Conductivity Cu-NbC composites by High Pressure Torsion (HPT)2010
- Author(s)
  MUHAMMAD SHAZNI BIN NOR MOKLES, 梅本実
- Organizer
  第20回学生による材料フォーラム
- Place of Presentation
  名古屋大学
- Year and Date
  2010-11-25
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 表層強ひずみ加工により極低炭素鋼に形成した超微細結晶粒組織の熱的安定性2010
- Author(s)
  井口祐, 戸高義一, 梅本実
- Organizer
  日本協会2010鉄鋼協会2010年秋季講演大会(第160)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPTしたZr50Cu40Al10BMGの構造緩和挙動2010
- Author(s)
  春山修身, 横山嘉彦, 加藤秀美, 土谷浩一, 足立望, 戸高義一, 梅本実
- Organizer
  日本金属学会2010年秋期(第147回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-25
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Work-Softening, High Pressure Phase Formation and Powder Consolidation by HPT2010
- Author(s)
  Minoru Umemoto, Yoshikazu Todaka, Koichi Tsuchiya, Bui Duc Long
- Organizer
  The 7th Pacific Rim International Conference on Advanced Materials and Processing
- Place of Presentation
  オーストラリア・ケアンズ
- Year and Date
  2010-08-02
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 摩擦加工により形成した表層ナノ結晶粒化高炭素クロム鋼の摩擦摩耗特性に及ぼす湿度の影響2010
- Author(s)
  井口祐, 戸高義一, 梅本実, 永井宏典
- Organizer
  日本鉄鋼協会2010年秋季講演大会(第160回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-27
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 表層強ひずみ加工と高周波焼入れによるS45C焼戻しマルテンサイト鋼の転がり疲労特性2010
- Author(s)
  神志那薫, 永井宏典, 戸高義一, 梅本実, 三阪佳孝, 川嵜一博
- Organizer
  日本鉄鋼協会2010年秋季講演大会(第160回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-27
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Effect of Pre-aging on the Microstructure and Properties of Ti-Mo Alloys Subjected to High-Pressure Torsion2010
- Author(s)
  FARJAMI Susan, 江村聡, MIN Xiaohua, 戸高義一, 梅本実
- Organizer
  日本金属学会2010年春期(第146回) 日本鉄鋼協会2010年春季講演大会(第159回)
- Place of Presentation
  筑波大学筑波キャンパス
- Year and Date
  2010-03-29
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 摩擦加工により形成した表層ナノ結晶粒組織をもつS45C調質材の回転曲げ疲労特性2010
- Author(s)
  神志那薫, 戸高義一, 梅本実
- Organizer
  日本鉄鋼協会2010年秋季講演大会(第160回)
- Place of Presentation
  北海道大学札幌キャンパス
- Year and Date
  2010-09-26
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Nanocrystallization of β-titanium alloys by high-pressure torsion2009
- Author(s)
  S.Farjami, K.Tsuchiya, Y.Todaka, M.Umemoto
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] High-functionalization of mechanical properties in Ti and Zr by SPD under high-pressure2009
- Author(s)
  戸高義一, 東宏昭, 大西由城, 梅本実
- Organizer
  15th International Conference on the Strength of Materials (ICSMA15)
- Place of Presentation
  Germany, Dresden
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Structural refinement of Ni3Al intermetallic compound by high-pressure torsion2009
- Author(s)
  O.Ciuca, K.Tsuchiya, Y.Yokoyama, Y.Todaka, M.Umemoto
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Hydrogen Embrittlement of Submicrocrystalline Ultra-Low Carbon Steel Produced by High-Pressure Torsion Straining2009
- Author(s)
  Y.Todaka, K.Morisako, M.Kumagai, Y.Matsumoto, M.Umemoto
- Organizer
  The 2nd International Symposium on Steel Science (IS^3-2009)
- Place of Presentation
  Japan, Kyoto
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPT加工した極低炭素鋼の水素環境下における力学特性2009
- Author(s)
  森迫和宣, 戸高義一, 梅本実, 松本佳久
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Structural refinement in Ni3Al severely deformed by HPT2009
- Author(s)
  CIUCA Octav Paul, 土谷浩一, 横山嘉彦, 戸高義一, 梅本実
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-15
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 表層強ひずみ加工と高周波焼入れによるS45C焼戻しマルテンサイト鋼の組織制御2009
- Author(s)
  永井宏典, 梅本実, 戸高義一, 寺島章, 三阪佳孝, 川嵜一博
- Organizer
  日本金属学会2009年秋期(第145回) 日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-17
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Formation of nanocrystalline structure at worn surface in carbon steel by wearing process2009
- Author(s)
  K.Koujina, Y.Todaka, T.Yakushiji, H.Nagai, Y.Iguchi, M.Umemoto
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPT加工による極低炭素鋼の組織変化2009
- Author(s)
  熊谷匡明, Wu Ningning, 戸高義一, 梅本実
- Organizer
  日本金属学会2009年秋期(第145回) 日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-17
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPT加工したCu添加鋼の力学特性2009
- Author(s)
  橋本元仙, 梅本実, 戸高義一
- Organizer
  日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 高圧下巨大ひずみ加工による圧力誘起相変態を利用した材質制御2009
- Author(s)
  戸高義一, 梅本実, 大西由城, 東宏昭, 入江建州, 足立望, 上路林太郎
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 純Tiの高圧下強ひずみ加工により形成するω相と逆変態後のα相との結晶方位関係2009
- Author(s)
  戸高義一, 梅本実, 大西由城, 東宏昭, 入江建州, 足立望, 鈴木裕士
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 摩擦加工により作製した表層ナノ結晶粒化鉄鋼材料の摩擦・摩耗特性2009
- Author(s)
  井口祐, 戸高義一, 梅本実
- Organizer
  日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPT加工により作製したバルクω-Tiの電気抵抗率2009
- Author(s)
  入江建州, 戸高義一, 梅本実, 大西由城, 東宏昭, 足立望
- Organizer
  日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 巨大ひずみ加工による金属間化合物のナノ組織形成と非晶質化2009
- Author(s)
  土谷浩一, Octav Cuica, 戸高義一, 梅本実, 横山嘉彦
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 純ZrのHPT加工により形成するω相の変形挙動2009
- Author(s)
  足立望, 戸高義一, 梅本実, 大西由城, 東宏昭, 入江建州, 鈴木裕士
- Organizer
  日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Mechanical Properties Of Submicrocrystalline If Steel Produced By HPT-Straining (Invited)2009
- Author(s)
  Y Todaka, H.Nagai, Y.Takubo, M.Yoshii, M.Kumagai, M.Umemoto
- Organizer
  International Conference on Processing & Manufacturing of Advanced Materials (THERMEC'2009)
- Place of Presentation
  Germany, Dresden(H21年度他37件)
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Mechanical Properties Of Submicrocrystalline If Steel Produced By HPT-Straining2009
- Author(s)
  Y.Todaka, H.Nagai, Y.Takubo, M.Yoshii, M.Kumagai, M.Umemoto
- Organizer
  International Conference on Processing & Manufacturing of Advanced Materials (THERMEC'2009)
- Place of Presentation
  Germany, Dresden
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 高圧下強ひずみ加工により作製したバルクω-Zrの熱的安定性2009
- Author(s)
  東宏昭, 戸高義一, 梅本実, 大西由城, 入江建州, 足立望
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 表層超微細結晶粒組織を持つS45C調質材の回転曲げ疲労特性2009
- Author(s)
  神志那薫, 戸高義一, 薬師寺輝敏, 梅本実
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Effect of strain gradient and pressure in HPT on the hardening and grain refinement of metals2009
- Author(s)
  M.Umemoto, Y.Todaka, N.Wu, Y.Ohnishi, H.Azuma, K.Tsuchiya
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Influence of hydrogen on mechanical properties of submicrocrystalline ultra-low carbon steel produced by high-pressure torsion straining2009
- Author(s)
  K.Morisako, Y.Todaka, M.Kumagai, Y.Matsumoto, M.Umemoto
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] High-functionalization of Mechanical property in Ti and Zr by pressure-induced phase transformation under high-pressure torsion straining2009
- Author(s)
  戸高義一, 東宏昭, 大西由城, 梅本実
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] 鉄鋼材料における超強加工とその重要性2009
- Author(s)
  梅本実
- Organizer
  日本鉄鋼協会2009年春季講演大会(第157回)
- Place of Presentation
  東京工業大学
- Year and Date
  2009-03-30
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Behavior of pressure induced phase transformation in Mn steels by HPT-straining2009
- Author(s)
  WU Ningning, 梅本実, 戸高義一, 上路林太郎, 佐藤秀之
- Organizer
  日本金属学会2009年秋期(第145回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Severe plastic deformation of Zr-Cu-Al metallic glass in as-cast and crystallized conditions2009
- Author(s)
  K.Tsuchiya, S.Yamamoto, Y.Yokoyama, H.Kato, Y.Todaka, M.Umemoto
- Organizer
  Eighteenth International Conference on Processing and Fabrication of Advanced Materials (PFAM XVIII)
- Place of Presentation
  Japan, Sendai
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] HPT加工によるSUS304Lの組織制御2009
- Author(s)
  佐藤秀之, 梅本実, 戸高義一
- Organizer
  日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Nanocrystallization of β-Ti alloys by high-pressure Torsion2009
- Author(s)
  S.Fajami, K.Tsuchiya, S.Emura, X.H.Min, Y.Todaka, M.Umemoto
- Organizer
  日本金属学会2009年秋期(第145回) 日本鉄鋼協会2009年秋季講演大会(第158回)
- Place of Presentation
  京都大学吉田キャンパス
- Year and Date
  2009-09-16
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Microstructures and mechanical properties of bulk submicrocrystalline ω-Tiproduced by high-pressure torsion straining2008
- Author(s)
  Y.Todaka, J.Sasaki, T.Moto and M. Umemoto
- Organizer
  4th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials (ISAEM-2008)
- Place of Presentation
  Nagoya,Japan
- Data Source
  KAKENHI-PROJECT-18062005
[Presentation] Severe plastic deformation of steel surface by mechanical working2008
- Author(s)
  M. Umemoto
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Kitakyuusyuu, Japan
- Year and Date
  2008-11-23
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Strain Gradient Hardening and Pressure induced Phase Transformation of Metals by HPT2008
- Author(s)
  Minoru Umemoto
- Organizer
  Materials Science & Technology2008Conference and Exhibition (MS&T'08)
- Place of Presentation
  Pittsburgh, USA(H20年度他32件)
- Year and Date
  2008-10-08
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Strain Gradient Hardening and Pressure induced Phase Transf ormation of Metals by HPT2008
- Author(s)
  Minoru Umemoto
- Organizer
  Materials Science & Technology 2008 Conference and Exhibition (MS &T'O8)
- Place of Presentation
  Pittsburgh USA
- Year and Date
  2008-10-08
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Dissolution of cementite in carbon steels by severe plastic deformation2008
- Author(s)
  M. Umemoto
- Organizer
  The 4th International Conference on Nanomaterials by Severe Plastic Deformati (NanoSPD4)
- Place of Presentation
  Germay, Goslar
- Year and Date
  2008-08-21
- Data Source
  KAKENHI-PROJECT-20246103
[Presentation] Severe plastic deformation of steel surface by mechanical working2008
- Author(s)
  M.Umemoto and Y.Todaka
- Organizer
  International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008)
- Place of Presentation
  Fukuoka,Japan
- Data Source
  KAKENHI-PROJECT-18062005
[Presentation] Strain gradient hardening and pressure induced phase transformation of metals by HPT2008
- Author(s)
  M.Umemoto, Y.Todaka, J.Sasaki and I. Shuro
- Organizer
  The 4th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD4)
- Place of Presentation
  Goslar, Germany
- Data Source
  KAKENHI-PROJECT-18062005
[Presentation] Formation of Ultrafine Grained Structure in SUS 304 Stainless Steel Produced by High Pressure Torsion (HPT)2007
- Author(s)
  J G. LiP, Minoru, Umemoto, Y. Todaka, K. Tsuchiya
- Organizer
  The Sixth Pacific Rim International Conference on Advanced Materials and Processing(PRICM6)
- Place of Presentation
  Jeju,Korea
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Strengthening and Grain Refinement in Metals by Severe Plastic Deformation2007
- Author(s)
  M. Umemoto, Y. Todaka, J. Sasaki and K. Tsuchiya
- Organizer
  14th International Symposium on Metastable and Nano Materials(ISMANAM-2007)
- Place of Presentation
  Corfu, Greece
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Strengthening and Grain Refinement in Steels by Severe Plastic Deformation2007
- Author(s)
  Minoru Umemoto, Yoshikazu Todaka, Jinguo Li and Koichi Tsuchiya
- Organizer
  International Symposium on Ultrafine Grained Steels(ISUGS2007)
- Place of Presentation
  Kitakyushu, Japan
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Formation of nanocrystalline structure in metals by severe plastic deformation2007
- Author(s)
  Y.Todaka, M.Umemoto, J.Li, A.Yamazaki, C.Wang, J.Sasaki, K.Tsuchiya
- Organizer
  TMS (Materials Science & Technology) 2007, 136th Annual Meeting & Exhibition
- Place of Presentation
  Florida, U.S.A
- Data Source
  KAKENHI-PROJECT-18062005
[Presentation] Strengthening and Grain Refinement in Steels by Severe Plastic Deformation2007
- Author(s)
  Minoru, Umemoto, Yoshikazu, Todaka, Jinguo, Li, Koichi, Tsuchiya
- Organizer
  International Symposium on Ultrafme Grained Steels (ISUGS2007)
- Place of Presentation
  Kitakyushu Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Phase transformation induced by severe plastic deformation in SUS 304 stainless steell2007
- Author(s)
  Minoru, Umemoto, J G. Li, Y. Todaka, K. Fujisaku, K. Tsuchiya
- Organizer
  The 1st International Symposium on Steel Science 2007 (IS3 -2007)
- Place of Presentation
  Kyoto Japan
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Phase transformation induced by severe plastic deformation in SUS 304 stainless steell2007
- Author(s)
  Minoru Umemoto, J. G. Li, Y. Todaka, K. Fujisaku and K. Tsuchiya
- Organizer
  The 1st International Symposium on Steel Science 2007(IS3-2007)
- Place of Presentation
  Kyoto, Japan
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Formation of Ultrafine Grained Structure in SUS 304 Stainless Steel Produced by High Pressure Torsion(HPT)2007
- Author(s)
  J. G. LiP, Minoru Umemoto, Y. Todaka and K. Tsuchiya
- Organizer
  The Sixth Pacific Rim International Conference on Advanced Materials and Processing(PRICM6)
- Place of Presentation
  Jeju, Korea
- Description
  「研究成果報告書概要(和文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Strengthening and Grain Refinement in Metals by Severe Plastic Deformation2007
- Author(s)
  M. Umemoto, Y. Todaka, J. Sasaki, K. Tsuchiya
- Organizer
  14th International Symposium on Metastable and Nano Materials (ISMANAM-2007)
- Place of Presentation
  Corfu Greece
- Description
  「研究成果報告書概要(欧文)」より
- Data Source
  KAKENHI-PROJECT-18360329
[Presentation] Pronounced β-relaxation in severely deformed bulk metallic glass by high-pressure torsion straining
- Author(s)
  N.Adachi, Y.Todaka, K.Shintani, Y.Yokoyama, M.Umemoto
- Organizer
  The 13th International Symposium on Physics of Materials (ISPMA 13)
- Place of Presentation
  Czech Republic, Prague
- Year and Date
  2014-08-31 – 2014-09-04
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] 高密度格子欠陥を導入した純Feの力学的特性に及ぼす水素の影響
- Author(s)
  佐藤宏和, 戸高義一, 冨永尚吾, 大塚晃生, 梅本実
- Organizer
  第23回学生による材料フォーラム
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] その場中性子回折法によるサブミクロン結晶粒純Feの引張変形挙動解析
- Author(s)
  大槻匠, 戸高義一, 橋本元仙, 梅本実, 諸岡聡
- Organizer
  第23回学生による材料フォーラム
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] 高密度格子欠陥を導入した純Feの引張特性に及ぼす熱処理の影響
- Author(s)
  東利樹, 戸高義一, 梅本実, 橋本元仙, 寄本真久
- Organizer
  第23回学生による材料フォーラム
- Place of Presentation
  名古屋大学
- Data Source
  KAKENHI-PROJECT-24360306
[Presentation] Origin of Uniform Tensile Elongation in Pure Fe after High-Pressure Torsion - Straining
- Author(s)
  Y.Todaka, T.Otsuki, S.Morooka, S.Harjo, M.Umemoto
- Organizer
  The 6th International Conference on Nanomaterials by Severe Plastic Deformation (NANOSPD6)
- Place of Presentation
  France, Metz
- Year and Date
  2014-06-30 – 2014-07-04
- Data Source
  KAKENHI-PROJECT-24360306

1. THUCHIYA Koichi (50236907)

# of Collaborated Projects: 11 results

# of Collaborated Products: 127 results
2. TODAKA Yoshikazu (50345956)

# of Collaborated Projects: 10 results

# of Collaborated Products: 223 results
3. FUKUMOTO Masahiro (80173368)

# of Collaborated Projects: 5 results

# of Collaborated Products: 0 results
4. OKANE Isao (80169127)

# of Collaborated Projects: 4 results

# of Collaborated Products: 0 results
5. MAKI Tadashi (10026247)

# of Collaborated Projects: 3 results

# of Collaborated Products: 0 results
6. SHINGU Hideo (20026024)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
7. ISHIHARA Keiichi (30184550)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
8. MIZUTANI Uichiro (00072679)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
9. INOUE Akihisa (10108566)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
10. SUZUKI Kenji (10005861)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
11. TSUZAKI Kaneaki (40179990)

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
12. MORII Koichi

# of Collaborated Projects: 2 results

# of Collaborated Products: 0 results
13. HORITA Zenji (20173643)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
14. AMEYAMA Kei (10184243)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
15. WATANABE Ryuzo (20005341)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
16. TOMOTA You (90007782)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
17. ISHIDA Kiyohito (20151368)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
18. TANAKA Toshihiro (10179773)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
19. NAKAJIMA Hideo (30134042)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
20. ENOMOTO Masato (70241742)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
21. OHTANI Hiroshi (70176923)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
22. MASUYAMA Keiichi (80249771)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
23. KOBAYASHI Toshiro (90023324)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
24. NIINOMI Mitsuo (50126942)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
25. OHTSUKA Hideyuki (10343857)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
26. TABUCHI Masayuki (90321364)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
27. WATANABE Seiichi (60241353)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
28. 原田泰典 (30218656)

# of Collaborated Projects: 1 results

# of Collaborated Products: 1 results
29. 古谷野保 (00215419)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
30. 長谷部光弘 (70005552)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
31. 岡本紘昭 (40233382)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
32. 田村今男 (70025815)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
33. NANBA Shigenobu

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
34. KOMATSUBARA Nozomi

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
35. 古谷野有

# of Collaborated Projects: 0 results

# of Collaborated Products: 1 results

UMEMOTO Minoru 梅本 実

Research Projects

Research Products

Co-Researchers

Microstructure control by HPT deformation to improve strength and toughness of austenitic stainless steelsPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Strengthening and toughening of metallic materials by size invariant deformation with an ultra large strain gradient and the clarification of its mechanismPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

The quantitative evaluation of effect of strain gradient on the strengthening and structure refinement of metals during ultra large strainingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Study on the formation mechanism of nanocrystalline structure by severe plastic deformation and analysis of its structure in atomic scalePrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Development of environmental conservation type thermoelectric device of silicide compounds and their power generation modulesPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Research on the properties of bulk cementite prepared by mechanical alloyingPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

Principal Investigator

Project Period (FY)

Research Category

Research Field

Research Institution

UMEMOTO Minoru 梅本実