nakazawa kenta 中澤謙太

… Alternative Names

Nakazawa Kenta 中澤謙太

Less

Researcher Number	50824520
Other IDs	https://orcid.org/0000-0001-7496-2550
Affiliation (Current)	2025: 静岡大学, 工学部, 准教授
Affiliation (based on the past Project Information) *help	2025: 静岡大学, 工学部, 准教授 2018 – 2024: 静岡大学, 工学部, 助教
Review Section/Research Field	Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Basic Section 28050:Nano/micro-systems-related / 0301:Mechanics of materials, production engineering, design engineering, fluid engineering, thermal engineering, mechanical dynamics, robotics, aerospace engineering, marine and maritime engineering, and related fields Except Principal Investigator Basic Section 18020:Manufacturing and production engineering-related / Medium-sized Section 21:Electrical and electronic engineering and related fields / Basic Section 18010:Mechanics of materials and materials-related
Keywords	Principal Investigator 大気圧プラズマ / MEMS / 微細加工 / マイクロマシニング / 機械学習 / インプロセス計測 / マイクロオプティクス / 位置決め / 精密位置決め / 大気圧プラズマジェット … More Except Principal Investigator … More 微細加工 / アディティブマニュファクチャリング / ナノ微粒子 / 電気泳動堆積 / レーザートラップ / 走査型イオン伝導顕微鏡 / アクティブマニュファクチャリング / 広視野生体計測 / 定量計測 / 広視野イメージング / マルチストレージ / MELSCI / 空間周波数領域イメージング / マルチアパーチャ / CMOSイメージセンサ / 高輝度放射光 / 破壊力学 / 光計測 / 金属疲労 / 表面改質 / 粉末冶金 Less

機械学習を駆使した大気圧プラズマジェット微細加工システムPrincipal Investigator
- Principal Investigator
  
  中澤謙太
- Project Period (FY)
  2025 – 2027
- Research Category
  
  Grant-in-Aid for Scientific Research (C)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Shizuoka University
集光スポット顕微計測による加工速度制御を用いたレーザー支援電気泳動堆積法の開発
- Principal Investigator
  
  岩田太
- Project Period (FY)
  2023 – 2025
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Shizuoka University
インプロセス制御した大気圧プラズマジェット5軸加工法の開発とMEMSへの応用Principal Investigator
- Principal Investigator
  
  中澤謙太
- Project Period (FY)
  2022 – 2024
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Shizuoka University
Computational CMOS image sensor for wide-field quantitative tissue imaging
- Principal Investigator
  
  Kagawa Keiichiro
- Project Period (FY)
  2021 – 2023
- Research Category
  
  Grant-in-Aid for Scientific Research (A)
- Review Section
  
  Medium-sized Section 21:Electrical and electronic engineering and related fields
- Research Institution
  Shizuoka University
Development of micro three-dimensional fabrication by laser-assisted electrophoretic deposition and plasmon heated sintering
- Principal Investigator
  
  Iwata Futoshi
- Project Period (FY)
  2020 – 2022
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18020:Manufacturing and production engineering-related
- Research Institution
  Shizuoka University
Micromaching for freeform generation by atmospheric pressure plasma jet and precision positioningPrincipal Investigator
- Principal Investigator
  
  Nakazawa Kenta
- Project Period (FY)
  2019 – 2020
- Research Category
  
  Grant-in-Aid for Early-Career Scientists
- Review Section
  
  Basic Section 28050:Nano/micro-systems-related
- Research Institution
  Shizuoka University
4D evaluation of damage in hetero-structured materials with high performance by multi-scale measurement
- Principal Investigator
  
  Kikuchi Shoichi
- Project Period (FY)
  2019 – 2021
- Research Category
  
  Grant-in-Aid for Scientific Research (B)
- Review Section
  
  Basic Section 18010:Mechanics of materials and materials-related
- Research Institution
  Shizuoka University
大気圧プラズマによるマスクレス垂直深堀エッチング法の開発Principal Investigator
- Principal Investigator
  
  中澤謙太
- Project Period (FY)
  2018 – 2019
- Research Category
  
  Grant-in-Aid for Research Activity Start-up
- Review Section
  
  0301:Mechanics of materials, production engineering, design engineering, fluid engineering, thermal engineering, mechanical dynamics, robotics, aerospace engineering, marine and maritime engineering, and related fields
- Research Institution
  Shizuoka University

All 2024 2023 2022 2021 2020 2019

All Journal Article Presentation Patent

[Journal Article] In-process sintering of Au nanoparticles deposited in laser-assisted electrophoretic deposition2023
- Author(s)
  Yuki Yoshimoto, Kenta Nakazawa, Makoto Ishikawa, Atsushi Ono, and Futoshi Iwata
- Journal Title
  
  Optics Express
  
  Volume: 31 Issue: 25 Pages: 41726-41726
- DOI
  10.1364/oe.501590
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-22K14158
[Journal Article] Scanning ion conductance microscope with a capacitance-compensated current source amplifier2023
- Author(s)
  Kenta Nakazawa, Teruki Tsukamoto, and Futoshi Iwata
- Journal Title
  
  Review of Scientific Instruments
  
  Volume: 94 Issue: 7 Pages: 073705-073705
- DOI
  10.1063/5.0150948
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22K14158, KAKENHI-PROJECT-22K18969
[Journal Article] In-process monitoring of atmospheric pressure plasma jet etching using a confocal laser displacement sensor2023
- Author(s)
  Takeru Tomita, Kenta Nakazawa, Takahiro Hiraoka, Yuichi Otsuka, Kensuke Nakamura, and Futoshi Iwata
- Journal Title
  
  Microsystem Technologies
  
  Volume: 29 Issue: 8 Pages: 1107-1116
- DOI
  10.1007/s00542-023-05462-5
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-22K14158
[Journal Article] Additive Manufacturing of Metal Micro-ring and Tube by Laser-Assisted Electrophoretic Deposition with Laguerre Gaussian Beam2021
- Author(s)
  K. Nakazawa, S. Ozawa, F. Iwata
- Journal Title
  
  Nanomanufacturing and Metrology
  
  Volume: 4 Issue: 4 Pages: 271-277
- DOI
  10.1007/s41871-020-00087-y
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-20H02044
[Journal Article] Micromachining of polymers using atmospheric pressure inductively coupled helium plasma localized by a scanning nanopipette probe microscope2021
- Author(s)
  Shun Toda, Kenta Nakazawa, Akihisa Ogino, Masaru Shimomura, and Fuoshi Iwata
- Journal Title
  
  Journal of Micromechanics and Microengineering
  
  Volume: 31 Issue: 6 Pages: 065008-065008
- DOI
  10.1088/1361-6439/abf845
- Peer Reviewed
- Data Source
  KAKENHI-PROJECT-19K15419
[Journal Article] Atmospheric He/O2 plasma jet fine etching with a scanning probe microscope2020
- Author(s)
  Kenta Nakazawa, Sho Yamamoto, Ei Nakagawa, Akihisa Ogino, Masaru Shimomura, and Futoshi Iwata
- Journal Title
  
  AIP Advances
  
  Volume: 10 Issue: 9 Pages: 095103-095103
- DOI
  10.1063/5.0017952
- NAID
  120006884875
- Peer Reviewed / Open Access
- Data Source
  KAKENHI-PROJECT-19K15419
[Patent] エッチング装置及びエッチング方法2023
- Inventor(s)
  中澤謙太，岩田太
- Industrial Property Rights Holder
  中澤謙太，岩田太
- Industrial Property Rights Type
  特許
- Filing Date
  2023
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] Simultaneous imaging of shallow and deep tissues based on multi-line scanning2024
- Author(s)
  Naoshi Yoneyama, Sota Nakazawa, Kanta Iyanagi, Yusuke Tanihata, Ryotaro Mori, Manabu Machida, Gordon T. Kennedy, Anthony J. Durkin, Keiichiro Kagawa
- Organizer
  SPIE Photonics West
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-21H04557
[Presentation] Improved reproducibility of 3D microfabrication by laser-assisted electrophoretic deposition using feedback stage contro2024
- Author(s)
  D. Naresh, K. Nakazawa, F. Iwata
- Organizer
  2024年度精密工学会春季学術講演会
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] 空間周波数領域イメージングを用いた多層構造の計測と機能の拡張2023
- Author(s)
  香川景一郎, 米山直志, 中澤壮太, 井柳幹太, 森涼太朗, 馮宇, 安富啓太, 川人祥二
- Organizer
  第29回医用近赤外線分光法研究会・第27回酸素ダイナミクス研究会合同研究会,
- Data Source
  KAKENHI-PROJECT-21H04557
[Presentation] Improvement of Young's Modulus of the Structures Fabricated by Laser-assisted Electrophoretic Deposition2023
- Author(s)
  Y. Yoshimoto, K. Nakazawa, M. Ishikawa, and F. Iwata
- Organizer
  The 10th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] マルチライン光走査に基づく生体組織の表層と深層の同時イメージング2023
- Author(s)
  米山直志, 中澤壮太, 井柳幹太, 森涼太郎, 町田学, 香川景一郎
- Organizer
  日本光学会年次学術講演会Optics & Photonics Japan 2023
- Data Source
  KAKENHI-PROJECT-21H04557
[Presentation] Development of deep etching method by atmospheric pressure plasma jet2023
- Author(s)
  Y. Yoshimoto, K. Nakazawa, M. Ishikawa, and F. Iwata
- Organizer
  The 10th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2023)
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] 大気圧プラズマジェットを用いた垂直深堀エッチング法の開発2023
- Author(s)
  中澤謙太，岩田太
- Organizer
  2023年度精密工学会春季学術講演会
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] In-process anneal treatment for laser-assisted electrophoretic deposition2022
- Author(s)
  Y. Yoshimoto, K. Nakazawa, A. Ono, and F. Iwata
- Organizer
  The 24th Takayanagi Kenjiro Memorial Symposium
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] レーザー支援電気泳動堆積を用いた微細立体造形によるインプロセスでの熱処理法の開発とヤング率の改善2022
- Author(s)
  吉元裕貴，中澤謙太，岩田太
- Organizer
  第22回日本表面真空学会中部支部学術講演会
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] 大気圧プラズマジェット加工の高精度化に向けたインプロセス深さ計測法の開発2022
- Author(s)
  富田丈瑠，中澤謙太，平岡尊宏，大塚優一，中村謙介，岩田　太
- Organizer
  第39回「センサ・マイクロマシンと応用システム」シンポジウム
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] レーサ支援電気泳動堆積法におけるインフロセスての局所熱処理の効果2022
- Author(s)
  吉元裕貴、中澤謙太、小野篤史、岩田太
- Organizer
  2022年度　第83回応用物理学会秋季学術講演会
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] Development of atmospheric pressure plasma jet etching for trimming of micro-machined devices2022
- Author(s)
  Takeru Tomita , Kenta Nakazawa, Takahiro Hiraoka, Yuichi Otsuka, Kensuke Nakamura, Futoshi Iwata
- Organizer
  2022 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-22K14158
[Presentation] レーザー支援電気泳動堆積法におけるインプロセス局所加熱の検証2022
- Author(s)
  吉元裕貴，中澤謙太，岩田太
- Organizer
  2022年度精密工学会秋季学術講演会
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] 堆積中の光強度モニタリングを用いたレーザー支援局所電機泳動堆積法の加工再現性向上2021
- Author(s)
  田中匠，中澤健太，岩田太
- Organizer
  2021年度精密工学会春季学術講演会
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] 加工再現性向上のためのビームスポットモニタリングを用いたレーザー支援局所電気泳動堆積法による微細立体造形2021
- Author(s)
  田中匠，中澤健太，岩田太
- Organizer
  2021年度精密工学会秋季学術講演会
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] Fatigue properties of CrMnFeCoNi high-entropy alloy fabricated by spark plasma sintering under four-point bending2021
- Author(s)
  K. Fujita, K. Nakazawa, H. Fujiwara, S. Kikuchi
- Organizer
  JSSUME2020+1
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19H02024
[Presentation] 堆積中の光強度モニタリングを用いたレーザー支援局所電機泳動堆積法の加工再現性向上2021
- Author(s)
  田中匠，中澤健太，岩田太
- Organizer
  精密工学会春季学術講演会
- Data Source
  KAKENHI-PROJECT-20H02044
[Presentation] 大気圧誘導結合型プラズマを局所照射可能な走査型ナノピペットプローブ顕微鏡の開発と表面微細エッチングへの応用2021
- Author(s)
  戸田竣，中澤謙太，荻野明久，下村勝，岩田太
- Organizer
  2021年度第68回応用物理学会春季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19K15419
[Presentation] ハイエントロピー合金CrMnFeCoNiの四点曲げ疲労特性に及ぼす結晶粒径の影響評価2021
- Author(s)
  藤田佳佑，中澤謙太，藤原弘，菊池将一
- Organizer
  日本材料学会　第70期学術講演会
- Data Source
  KAKENHI-PROJECT-19H02024
[Presentation] 四点曲げ疲労試験におけるハイエントロピー合金CrMnFeCoNiの疲労き裂発生・進展挙動のその場観察2020
- Author(s)
  藤田佳佑，中澤謙太，藤原弘，菊池将一
- Organizer
  日本材料学会　第6回材料シンポジウムワークショップ
- Data Source
  KAKENHI-PROJECT-19H02024
[Presentation] Scanning nanopipette probe microscope capable of local irradiation of inductively coupled plasma for surface fine processing2020
- Author(s)
  Syun Toda, Kenta Nakazawa, and Futoshi Iwata
- Organizer
  ICSPM28
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15419
[Presentation] Evaluation of displacement and surface potential of a micro-piezoresistor by a Kelvin probe force microscope2020
- Author(s)
  Kenta Nakazawa, Takumi Tanaka, Takeshi Uruma, and Futoshi Iwata
- Organizer
  ICSPM28
- Int'l Joint Research
- Data Source
  KAKENHI-PROJECT-19K15419
[Presentation] 走査型プローブ顕微鏡を援用した酸素添加大気圧プラズマジェットによるPMMA膜のサブマイクロ加工2020
- Author(s)
  中澤謙太，山本　将，中川　英，荻野明久，下村　勝，岩田　太
- Organizer
  2020年度精密工学会秋季大会学術講演会
- Data Source
  KAKENHI-PROJECT-19K15419
[Presentation] 放電プラズマ焼結により作製したハイエントロピー合金CrMnFeCoNiの四点曲げ疲労特性評価2020
- Author(s)
  藤田佳佑，中澤謙太，藤原弘，菊池将一
- Organizer
  日本材料学会　第69期学術講演会
- Data Source
  KAKENHI-PROJECT-19H02024
[Presentation] 大気圧プラズマ局所エッチングによるトリミング法の基礎検討2019
- Author(s)
  中澤謙太，岩田太
- Organizer
  第36回センサ・マイクロマシンと応用システムシンポジウム
- Data Source
  KAKENHI-PROJECT-19K15419

1. Iwata Futoshi (30262794)

# of Collaborated Projects: 3 results

# of Collaborated Products: 8 results
2. Kikuchi Shoichi (80581579)

# of Collaborated Projects: 1 results

# of Collaborated Products: 4 results
3. Kagawa Keiichiro (30335484)

# of Collaborated Projects: 1 results

# of Collaborated Products: 3 results
4. 藤井朋之 (30377840)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
5. 塩澤大輝 (60379336)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
6. 小野篤史 (20435639)

# of Collaborated Projects: 1 results

# of Collaborated Products: 2 results
7. 中尾秀信 (80421395)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results
8. 關根惟敏 (00765993)

# of Collaborated Projects: 1 results

# of Collaborated Products: 0 results

nakazawa kenta 中澤 謙太

Nakazawa Kenta 中澤 謙太

Research Projects

Research Products

Co-Researchers

機械学習を駆使した大気圧プラズマジェット微細加工システムPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

集光スポット顕微計測による加工速度制御を用いたレーザー支援電気泳動堆積法の開発

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

インプロセス制御した大気圧プラズマジェット5軸加工法の開発とMEMSへの応用Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Computational CMOS image sensor for wide-field quantitative tissue imaging

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Development of micro three-dimensional fabrication by laser-assisted electrophoretic deposition and plasmon heated sintering

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

Micromaching for freeform generation by atmospheric pressure plasma jet and precision positioningPrincipal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

4D evaluation of damage in hetero-structured materials with high performance by multi-scale measurement

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

大気圧プラズマによるマスクレス垂直深堀エッチング法の開発Principal Investigator

Principal Investigator

Project Period (FY)

Research Category

Review Section

Research Institution

[Journal Article] In-process sintering of Au nanoparticles deposited in laser-assisted electrophoretic deposition2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Scanning ion conductance microscope with a capacitance-compensated current source amplifier2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] In-process monitoring of atmospheric pressure plasma jet etching using a confocal laser displacement sensor2023

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Additive Manufacturing of Metal Micro-ring and Tube by Laser-Assisted Electrophoretic Deposition with Laguerre Gaussian Beam2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Micromachining of polymers using atmospheric pressure inductively coupled helium plasma localized by a scanning nanopipette probe microscope2021

Author(s)

Journal Title

DOI

Data Source

[Journal Article] Atmospheric He/O2 plasma jet fine etching with a scanning probe microscope2020

Author(s)

nakazawa kenta 中澤謙太

Nakazawa Kenta 中澤謙太

[Presentation] 大気圧プラズマジェットを用いた垂直深堀エッチング法の開発2023

[Presentation] 加工再現性向上のためのビームスポットモニタリングを用いたレーザー支援局所電気泳動堆積法による微細立体造形2021